ANDROID MOBILE APPLICATION
Bogdan-Andrei BLAJ
ABOUT
The purpose of this application is to create a wide range of
remote control devices for a mini helicopter.
The application contain the following features
Send directions based on phone orientation
Continue monitoring outside temperature
A live feed video transmission
ABOUT
The application is continue updating the helicopter’s
parameters using a Bluetooth infrastructure. This data is
computed from original sensor output and based on o mini
communication protocol 8 bytes frames are exchange
between this two devices.
The sensors and adapters used in algorithms
Accelerometer
Gyroscope
Bluetooth adapter
RESOURCES
For this project 2 team members were assigned as resource
Bogdan Andrei BLAJ
Mihai DOMOTOR
Each team member had two roles as developer and tester Bogdan BLAJ Software Developer
Mihai DOMOTOR Hardware Developer
RESOURCES
Hardware resources used: 2 laptops
1 Smartphone with Android 2.3.3 OS
DC motors
Chipkit uno32 Arduino development board
Sensors and Bluetooth module
PROJECT MILESTONES
COMPLETE TASK LIST
GANTT
WORK HOURS- BOGDAN BLAJ
WORK HOURS-MIHAI DOMOTOR
CONCLUSION
The project planning was made using OpenProj. The
purpose of planning was to estimate the amount of work
involved and to create a project schedule.
Project planning was useful in having an overview of the
project state and to identify the tasks the urgent tasks.
Planning has to be made with extreme care in order to be
effective and to serve its purposes.
THANK YOU