2
Company ProfileStempf Automotive Industries, Inc. has been a pioneer in the wheel alignment business for over 75 years, that’s why we have the most complete line of alignment products in the world.
In addition to the research and manufacture of our own line of products, we also handle other industry-leading product lines including Northstar Mfg. and others to allow you to choose the mix of products that’s right for you.
We also handle over 10,000 other undercar products from over 100 leading manufacturers at some of the most attractive prices you’ll ever see. So if you’re looking for Brake Pads, Hub & Bearing Assemblies, Chassis Parts or any other undercar products you can think of, give us a call, we’ll surprise you with what we have.
3Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
ProRYDE LIFT & LEVELING KITS 4-5
APPLICATION GUIDE 6-55
FRONT WHEEL 56-67
REAR WHEEL 68-82
LIGHT TRUCK 83-104
HEAVY DUTY TRUCK 105-121
TOOLS 122-137
ACCESSORIES 138-148
OTHER LINES WE OFFER 150-161
CONVERSION CHART 162
4Pr
oRYD
E
lift it. level it. tune it. exactly the way you want it.lift it. level it. tune it. exactly the way you want it.lift it. level it. tune it. exactly the way you want it.
Our SEMA award-winning products are the
NEW generation of LIFT & LEVELING products.
Every PRORYDE® kit is ADJUSTABLE, so you get
exactly the ride height result you want, every time.
Dial-in your perfect ride height!
strut & coil springsuspensions (74-series)
WINNER!Sema best new off-road/4X4product of the year
torsion bar suspensions
(64-series)
COIL SPRING suspensions
(56-series)
add a full range of
adjustability and up to
3.0” of front end lift*
*Varying by make/model
leaf spring suspensions(52-series)
3-in-1 design allows rear lift options of 1.0”, 1.5” OR 2.0”
WINNER!WINNER!
add a full range of add a full range of
adjustability and up to adjustability and up to
e x a c t l y t h e w a y y o u w a n t i t.
2012 SEMABest new productRunner-up!
add a full range of add a full range of
(64-series)
one kit, lift options from 1.5” to 3.0” **Varying by make/model
3-in-1 design allows rear lift
options of 1.0”, 1.5” OR 2.0”
5
ProRYDE
e x a c t l y t h e w a y y o u w a n t i t.
1-888-813-RYDE (7933)www.PRORYDE.com
1-888-813-RYDE (7933)
www. PRORYDE.com
6
See Application Guide, pages 8-52, for specific models and years
A
LIG
NM
ENT
TYPE
SWell over one half of all cars on the road today, and approximately 85% of all new vehicles, require all four wheels to be aligned for proper handling, maximum tire wear and safety.
This refers to setting the alignment angles on all four wheels so they are positioned straight ahead and parallel, and the vehicle’s steering wheel is centered.
RESULT:All four wheels are positioned straight ahead and parallel, and the steering wheel is centered.
This refers to aligning the front wheels to the “Rear Thrust Line” or driving direction of the Rear Wheels. This is done by taking angle readings on both front and rear wheels and referencing the front wheels to the driving direction of the rear wheels - thrust line. (See illustration below). The steering wheel is centered and the front wheels are then set to specifications.
WHAT IS DONE:1. Angle readings are taken on all four wheels.2. The steering wheel is centered3. Front wheels are referenced to the rear thrust line and set to specifications.
FOUR WHEEL ‘‘TOTAL’’ ALIGNMENT
FOUR WHEEL ‘‘THRUSTLINE’’ ALIGNMENT
RESULT:All four wheels are parallel and the steering wheel is centered. (Angles have been exaggerated to demonstrate condition)
WHAT IS DONE:1. Angle readings are taken on all four wheels2. Rear wheels are set to specification. (Rear thrust line corresponds tovehicle center line).3. Steering wheel is centered4. Front wheels are referenced to the rear thrust line and set to specifications
Illustrations Courtesy of Hunter Engineering Co.
7Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
APPLIC
ATION
GU
IDE
PRODUCT APPLICATION QUICK TABLE This portion of the catalog has been designed to aid you in the proper selection of Alignment Products and Tools for both Front and Rear applications on most Domestic and Imported Passenger Cars and Light Trucks.
How to use the Product Application Quick Table, pages 8-52
Below is an example of the application section
In Example 1 above you are looking up both Front and Rear Alignment Products for some Buick vehicles. First, you are given information as to whether you should recommend a 4 wheel total or 4 wheel thrust alignment procedure. Next, you are given the adjustment method
The next column lists the actual part number for front camber correction, front caster correction, or both. In this case, there is a factory adjustment method, which is very difficult, or you have a choice of two aftermarket adjustment kits, The following column shoes the product page number, which directs you to the page in this catalog giving information about the listed product, including the degree of change possible and a picture of each part number.
The next column is for a recommended installation tool, if one is needed.
The last column lists the estimated installation time, in hours, for that product. NOTE: All estimated installation times are for one side of the vehicle.
Continuing across the page to rear alignment you follow the same procedure, except you will be dealing with camber and tow. Again you have a choice of products. Notice that the same part often works for both front and rear applications.
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
BMW 8 series (E31)1993-1997
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BMW M11998-2002
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
BMW E46/M31999-2011
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BMW M5, M5 Touring (E34)
1991-1993
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
BMW X5 (E53)2000-2004
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BMW Z11996-2002
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
BMW Z8 (E52)2000-2003
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BRISTOL
Peugeot All1945-2009
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
BUICK
Buick Lacrosse2005-2009
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1582
41-214Fac Adj. 56
570.30 / -0.30
Buick Lacrosse2010-2014
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Buick Rear Wheel Drive1971-1996
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Buick Century FWD1985-1996
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-13001
46-2400146-13001
46-240019699
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Buick Century FWD1997-2005
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
Buick Park Ave/Electra/Ultra LaSabre FWD
1985-1996
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Magna CamShimShim
41-1602
46-13001
46-24001
Fac Adj.46-13001
46-24001
569699
88-05088-111088-343
0.30 / -0.60 / 0.600.60 / 0.60
Buick Enclave2008-2014
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
-Cam Bolt
Camber Kit
Fac Adj.41-825646-421
Fac Adj.-
6494 88-7996A
- / -0.30 1.00
Buick LeSabre1986-1999
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Magna CamShimShim
41-1602
46-13001
46-24001
Fac Adj.46-13001
46-24001
569699
88-05088-111088-343
0.30 / -0.60 / 0.60
0.60 / -
Buick LeSabre2000-2005
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1900 Fac Adj. 72 0.80 / -
Buick Lucerne2006-2011
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
-Shim
Non Adj.46-1300 SERIES1
Fac Adj.46-1300SERIES1
-96
- / -- / -
Buick Park Ave/Ultra1997-2005
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1900 Fac Adj. 72 0.80 / -
Buick Rainier 2WD/4WD2004-2007
X Camber-CasterTool 88-8929 88-8929 124 - / - - Non Adj. Non Adj. - - / -
Buick Riviera/Reatta1985-1993
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1600 Fac Adj. 97 0.60 / -
Buick Regal1988-1996
X -Shim
Fac Adj.45-70104 Fac Adj. -
78 88-060 - / -0.50
Magna CamAxis Cam
41-1602
41-216Fac Adj. 56
57 88-89230.30 / -0.30
Buick Regal1997-2004
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
Buick Regal2011-2014
X Axis Cam 41-212 Non Adj. 57 0.30 / - - Fac Adj. Fac Adj. - - / -
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
BMW 8 series (E31)1993-1997
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BMW M11998-2002
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
BMW E46/M31999-2011
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BMW M5, M5 Touring (E34)
1991-1993
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
BMW X5 (E53)2000-2004
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BMW Z11996-2002
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
BMW Z8 (E52)2000-2003
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BRISTOL
Peugeot All1945-2009
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
BUICK
Buick Lacrosse2005-2009
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1582
41-214Fac Adj. 56
570.30 / -0.30
Buick Lacrosse2010-2014
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Buick Rear Wheel Drive1971-1996
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Buick Century FWD1985-1996
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-13001
46-2400146-13001
46-240019699
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Buick Century FWD1997-2005
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
Buick Park Ave/Electra/Ultra LaSabre FWD
1985-1996
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Magna CamShimShim
41-1602
46-13001
46-24001
Fac Adj.46-13001
46-24001
569699
88-05088-111088-343
0.30 / -0.60 / 0.600.60 / 0.60
Buick Enclave2008-2014
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
-Cam Bolt
Camber Kit
Fac Adj.41-825646-421
Fac Adj.-
6494 88-7996A
- / -0.30 1.00
Buick LeSabre1986-1999
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Magna CamShimShim
41-1602
46-13001
46-24001
Fac Adj.46-13001
46-24001
569699
88-05088-111088-343
0.30 / -0.60 / 0.60
0.60 / -
Buick LeSabre2000-2005
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1900 Fac Adj. 72 0.80 / -
Buick Lucerne2006-2011
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
-Shim
Non Adj.46-1300 SERIES1
Fac Adj.46-1300SERIES1
-96
- / -- / -
Buick Park Ave/Ultra1997-2005
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1900 Fac Adj. 72 0.80 / -
Buick Rainier 2WD/4WD2004-2007
X Camber-CasterTool 88-8929 88-8929 124 - / - - Non Adj. Non Adj. - - / -
Buick Riviera/Reatta1985-1993
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1600 Fac Adj. 97 0.60 / -
Buick Regal1988-1996
X -Shim
Fac Adj.45-70104 Fac Adj. -
78 88-060 - / -0.50
Magna CamAxis Cam
41-1602
41-216Fac Adj. 56
57 88-89230.30 / -0.30
Buick Regal1997-2004
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
Buick Regal2011-2014
X Axis Cam 41-212 Non Adj. 57 0.30 / - - Fac Adj. Fac Adj. - - / -
8A
PPLI
CAT
ION
GU
IDE
ACURA ACURA
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ACURA
Acura 2.2CL/2.3CL/3.0CL1997-2003
XBall Joint
Performance KitBall Joint
41-53041-56041-529
41-53041-529
60-
60 88-7800A
0.90 / 0.90- / -
0.90
ShimPerformance Kit
46-216041-5600 Fac Adj. 72
-0.20 / -
-
Acura 3.2 CL2001-2003
X Ball Joint 41-532 Fac Adj. 60 88-7800A 0.90 / - - Non Adj. Fac Adj. - - / -
Acura EL2001-2002
X Ball Joint 41-212 Non Adj. 57 0.30 / - Rear Arm 46-2180 Fac Adj. 78 0.30 / -
Acura EL2003-2005
X Axis Cam 41-216 Non Adj. 57 0.30 / - Rear Arm 46-2180 Fac Adj. 78 0.50 / -
Acura ILX2013-2015
X Axis Cam 41-217 Non Adj. 57 0.03 / - Rear Arm 46-2187 Fac Adj. 80 0.50 / -
Acura Integra1986-1989
X - Non Adj. Non Adj. - - / - ShimShim
46-12001
46-2300146-12001
46-230017472 88-343
0.60 / 0.600.60 / 0.60
Acura Integra / IntegraType R
1990-2001
XBall Joint
Performance KitPerformance Kit
41-53241-561041-561
41-53260-- 88-7800A
0.90 / 0.90--
ShimPerformance Kit
46-216041-5610 Fac Adj. 72
-0.20 / -
-
Acura Legend1986-1990
X - Non Adj. Fac Adj. - - / - - Non Adj. Fac Adj. - - / -
Acura Legend1991-1995
XBall Joint
Performance KitPerformance Kit
41-53241-561041-561
41-53260-- 88-7800A
0.90 / 0.90--
ShimPerformance Kit
46-216041-5610 Fac Adj. 72
-0.20 / -
-
Acura MDX 4WD2001-2006
X Magna CamAxis Cam
41-1592
41-216Non Adj. 56
570.30 / -0.30 Rear Arm 46-2192 Fac Adj. 81 0.50 / -
Acura MDX 4WD without Air Suspension
2007-2014
X Axis Cam 41-217 Non Adj. 57 0.30 / - Rear Arm 46-2196 Fac Adj. 82 - / -
Acura NSX1991-2005
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Acura RDX 4WD2007-2014
X Magna CamAxis Cam
41-1592
41-216Non Adj. 56
570.30 / -0.30 - Non Adj. Fac Adj. - - / -
Acura 3.5RL1996-2004
X Ball JointPerformance Kit
41-53241-561 41-532 60
- 88-7800A0.90 / 0.90
- - Non Adj. Fac Adj. - - / -
Acura 3.5RL2005-2012
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Acura RSX 2002 X Cam BoltAxis Cam
41-18041-214 Non Adj. -
570.30 / -0.30 Rear Arm 46-2180 Fac Adj. 78 0.50 / -
Acura RSX MID Year 022002-2006
X Magna CamAxis Cam
41-1592
41-216Non Adj. 56
570.30 / -0.30 Rear Arm 46-2180 Fac Adj. 78 0.50 / -
Acura SLX 4WD1996-1999
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Acura 2.5 TL1995-1998
XBall Joint
Performance KitPerformance Kit
41-53041-560041-560
Fac Adj.41-530
60-- 88-7800A
0.90 / -- / 0.90
-
ShimPerformance Kit
46-216041-5600 Fac Adj. 72
-0.20 / -
-
Acura 3.5TL1996-2008
X Ball Joint 41-532 41-532 60 88-7800A 0.90 / 0.90 Rear Arm 46-2195 Fac Adj.46-2195 81 0.70 / -
0.70
Acura 3.2 TL1997-1998
XBall Joint
Performance KitPerformance Kit
41-53241-561041-561
Fac Adj.41-532
60-- 88-7800A
0.90 / -- / 0.90
-
ShimPerformance Kit
46-216041-5610 Fac Adj. 72
-0.20 / -
-
Acura 3.2 TL1999-2003
XBall Joint
Performance KitPerformance Kit
41-53241-569041-561
Fac Adj.41-532
60-- 88-7800A
0.90 / -- / 0.90
-
Rear ArmPerformance Kit
46-219041-5690 Fac Adj. 81
-0.70 / -
-
Acura 3.2 TL2004-2008
X Ball Joint 41-532 Fac Adj.41-532 60 88-7800A
0.90 / - 0.90 Rear Arm 46-2195 Fac Adj.
46-2195 81 0.70 / - 0.70
Acura 3.2 TL2009-2014
X Ball Joint 41-532 Fac Adj.41-532 60 0.90 / -
0.90 Rear Arm 46-2184 Fac Adj. 79 0.30 / -
Acura TSX2004-2008
X Ball JointPerformance Kit
41-53241-561 41-532 60
- 88-7890A0.90 / -
-Rear ArmRear Arm
46-219546-2192
Non Adj.46-2195
8181
0.70 / -0.50 / 0.70
Acura TSX2009-2014
X Ball JointPerformance Kit
41-53241-561 41-532 60
- 88-7890A0.90 / 0.90
0.90 Rear Arm 46-2184 Fac Adj. 79 0.30 / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
9
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Acura Vigor1992-1994
XBall Joint
Performance KitPerformance Kit
41-53041-560041-560
41-53060-- 88-7800A
0.90 / 0.90--
ShimPerformance Kit
46-216041-5600 Fac Adj. 72
-0.20 / -
-
AUDI
Audi 100/200 FWD1989-1994
X - Fac Adj. Non Adj. - - / - ShimShim
46-11001
46-2200146-11001
46-220017472 88-343
0.60 / 0.600.60 / 0.60
Audi 100/200 Quattro/S41989-1994
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi 5000 FWD1978-1988
X - Fac Adj. Non Adj. - - / - ShimShim
46-11001
46-2200146-11001
46-220017472 88-343
0.60 / 0.600.60 / 0.60
Audi 90 FWD 1988 X - Fac Adj. Non Adj. - - / - ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Audi 5000 Quattro1986-1988
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi 801988-1992
X - Fac Adj. Non Adj. - - / - ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Audi 80/90 Quattro1988-1995
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi A4, A4/ S4 Quattro1996-2014
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Audi A61995-2011
X - Fac Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Audi A6 Avant1999-2011
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi A6 Allroad2001-2011
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi A6 Quattro1995-1997
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi A6 Quattro1998-2011
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi A81997-2000
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi A8 Quattro1997-2014
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi Allroad Quattro2001-2005
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi Cabriolet1994-1998
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Audi S42000-2014
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi S6 Quattro1995-2002
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi TT2000-2010
X - Fac Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Audi TT/ Quattro2000-2002
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Audi V8 Quattro1990-1994
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BMW
BMW 3 Series (E36) M Coupe/ Roadster
1999-2004
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
BMW 3 Series (E46)2001-2006
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - 88-9180 - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
ACURA BMW
10A
PPLI
CAT
ION
GU
IDE MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
BMW 5 series (E28, E34)1989-1995
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
BMW 5 series (E39)2001-2009
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BMW 7 series (E38)1995-2001
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BMW 8 series (E31)1993-1997
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BMW M11998-2002
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
BMW E46/M31999-2011
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BMW M5, M5 Touring (E34)
1991-1993
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
BMW X5 (E53)2000-2004
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BMW Z11996-2002
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
BMW Z8 (E52)2000-2003
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
BRISTOL
Peugeot All1945-2009
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
BUICK
Buick Lacrosse2005-2009
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1582
41-214Fac Adj. 56
570.30 / -0.30
Buick Lacrosse2010-2015
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Buick Rear Wheel Drive1971-1996
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Buick Century FWD1985-1996
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-13001
46-2400146-13001
46-240017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Buick Century FWD1997-2005
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
Buick Park Ave/Electra/Ultra LaSabre FWD
1985-1996
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Magna CamShimShim
41-1602
46-13001
46-24001
Fac Adj.46-13001
46-24001
567472
88-05088-111088-343
0.30 / -0.60 / 0.600.60 / 0.60
Buick Enclave2008-2014
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
-Cam Bolt
Camber Kit
Fac Adj.41-825646-421
Fac Adj.-
9993 88-7996A
- / -0.30 1.00
Buick LeSabre1986-1999
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Magna CamShimShim
41-1602
46-13001
46-24001
Fac Adj.46-13001
46-24001
567472
88-05088-111088-343
0.30 / -0.60 / 0.60
0.60 / -
Buick LeSabre2000-2005
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1900 Fac Adj. - 0.80 / -
Buick Lucerne2006-2011
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
-Shim
Non Adj.46-1300 SERIES1
Fac Adj.46-1300SERIES1
-74
- / -- / -
Buick Park Ave/Ultra1997-2005
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1900 Fac Adj. - 0.80 / -
Buick Rainier 2WD/4WD2004-2007
X Camber-CasterTool 88-8929 88-8929 - - / - - Non Adj. Non Adj. - - / -
Buick Riviera/Reatta1985-1993
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1600 Fac Adj. 75 0.60 / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
BMW BUICK
11
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Buick Regal1988-1996
X -Shim
Fac Adj.45-70104 Fac Adj. -
- 88-060 - / -0.50
Magna CamAxis Cam
41-1602
41-216Fac Adj. 56
57 88-89230.30 / -0.30
Buick Regal1997-2004
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
Buick Regal2011-2015
X Axis Cam 41-212 Non Adj. 57 0.30 / - - Fac Adj. Fac Adj. - - / -
Buick Rendezvous2002-2007
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Shim
Fac Adj.46-1300 SERIES1
Fac Adj.46-1300SERIES1
-74
- / -- / -
Buick Riviera1995-1999
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
- Non Adj. Fac Adj. - - / -
Buick Skyhawk1985-1989
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Buick Skylark1980-1998
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Buick Somerset1986-1987
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Buick Terraza FWD2005-2007
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30
ShimShim
46-13001
46-2400146-13001
46-240017472
0.60 / 0.600.60 / 0.60
Buick Terraza AWD2005-2007
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
CADILLAC
Cadillac Allante1987-1992
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1600 Fac Adj. 7588-05088-111088-343
0.60 / -
Cadillac Allante 1993 X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Cadillac Catera1997-2001
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Fac Adj. - - / -
Cadillac Cimarron1982-1988
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472 88-343
0.60 / 0.600.60 / 0.60
Cadillac CTS2003-2014
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Cadillac DeVille1985-1993
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Magna Cam 41-1602 Fac Adj. 56 0.30 / -
Cadillac DeVille1994-1999
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Cadillac DeVille2000-2005
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1900 Fac Adj. - 0.80 / -
Cadillac Eldorado1967-1978
X -Cam Bolt
Fac Adj.41-8247
Fac Adj.41-8247
-61
- / -1.00 / 1.00 - Non Adj. Non Adj. - - / -
Cadillac Eldorado1979-1985
X -Cam Bolt
Fac Adj.41-8247
Fac Adj.41-8247
-61
- / -1.00 / 1.00
ShimShim
46-13001
46-24001Fac Adj. 74
7288-05088-111088-343
0.60 / -0.60
Cadillac Eldorado1986-1992
X Magna CamAxis Cam
41-1602
41-216Fac Adj. 56
570.30 / -0.30 Shim 46-1600 Fac Adj. 75 0.50 / -
Cadillac Eldorado1993-2002
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Cadillac Escalade1999-2000
X -Cam Bolt
Fac Adj.41-82505
Fac Adj.41-82505
-99 88-7491
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
Cadillac Escalade/EXT 4WD
2002-2014
X-
BushingCamber Kit
Fac Adj.44-25095
41-8251
Fac Adj.44-25095
41-8251
-9599
88-7950A- / -
0.80 / 0.800.50 / 0.50
- Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
BUICK CADILLAC
12A
PPLI
CAT
ION
GU
IDE MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Replacement Pins
Quick Cam
44-250844-2506
44-250844-2506
9595
0.30 / 0.300.30 / 0.30
Cadillac Escalade (ProRYDE)
2002-2006
X 64-1000G
Cadillac Escalade (ProRYDE)
2007-2014
X 74-1000G
Cadillac Fleetwood RWD1975-1996
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Cadillac Fleetwood FWD1985-1993
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Cadillac Seville1980-1985
X -Cam Bolt
Fac Adj.41-8247
Fac Adj.41-8247
-61
- / -1.00 / 1.00
ShimShim
46-13001
46-24001Fac Adj. 74
7288-05088-111088-343
0.60 / -0.60
Cadillac Seville1986-1992
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1600 Fac Adj. 75 0.50 / -
Cadillac Seville/STS1993-1997
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Cadillac Seville/STS1998-2011
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1900 Fac Adj. - 0.80 / -
Cadillac SRX2004-2009
X - Fac Adj. - - - Fac Adj. Fac Adj. - - / -
Cadillac SRX2010-2014
X Axis CamMagna Cam
41-21641-1592
5756
0.30 0.30
ShimShim
46-1200 SERIES1
46-23001
46-1200SERIES1
46-23001
7472
- / -- / -
CHEVROLET
Chevrolet Astro 2WD1985-2005
X Shim CC CC - - / - Non Adj. -
Chevrolet Astro 4WD1990-2003
X -Cam Bolt
Fac Adj.41-82505
Fac Adj.41-82505
-99 88-7491
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
Chevrolet Avalanche 2500HD 2WD/4WD
2007-2013
X
-Bushing
Camber KitQuick Cam
Replacement Pins
Ball Joint
Fac Adj.44-251041-825144-250644-250844-2498
Fac Adj.44-251041-825144-250644-250844-2498
-9699959592
88-7950A
- / -0.80 / 0.800.50 / 0.500.30 / 0.300.30 / 0.300.90 / 0.90
Chevrolet Avalance 1500 (ProRYDE)
2007-2013
X 74-1000G
Chevrolet Avalanche 1500 2WD/4WD
2002-2006
X
-Bushing
Camber KitCamber KitCamber Kit
Fac Adj.44-25095
41-825144-250644-2508
Fac Adj.44-25095
41-825144-250644-2508
-95999595
88-7950A
- / -0.80 / 0.800.50 / 0.500.50 / 0.500.30 / 0.30
- Non Adj. Non Adj. - - / -
Chevrolet Avalanche 1500 (ProRYDE)
2002-2006
X 64-1000G
Chevrolet Avalanche 2500 (ProRYDE)
2002-2006
X 64-1200G
Chevrolet Silverado HD 1500/2500/3500 2WD/4WD
1999-2010
X
-Bushing
Camber KitQuick Cam
Replacement Pins
Ball JointControl Arm
W/BJ
Fac Adj.44-251041-825144-250644-250844-249844-2730
Fac Adj.44-251041-825144-250644-250844-249844-2730
-969995959293
88-7950A
- / -0.80 / 0.800.60 / 0.600.30 / 0.300.30 / 0.300.90 / 0.900.60 / 0.60
- Non Adj. Non Adj. - - / -
Chevrolet Aveo2004-2011
X Magna CamAxis Cam
41-14441-212 Non Adj. 56
570.30 / -0.30
ShimShim
46-11001
46-2200146-11001
46-220017472
0.60 / 0.600.60 / 0.60
Chevy Aveo2012-2014
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 Shim 46-7100 46-7100 - - / -
Chevrolet Bel Air 2WD 1975 X -Cam Bolt
Fac Adj.41-82505
Fac Adj.41-82505
-99 88-7491
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
CADILLAC CHEVROLET
13
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Chevrolet Beretta/Corsica1987-1995
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Chevrolet Beretta/Corsica 1996 X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Chevrolet Blazer Full Size 4WD
1970-1974
X Bushing 44-2460 44-2460 - 88-7090 0.80 / 0.80 - Non Adj. Non Adj. - - / -
Chevrolet Blazer Full Size 4WD
1987-1994
X -Cam Bolt
Fac Adj.41-82505
Fac Adj.41-82505
-99 88-7491
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
Chevrolet S10 Pickup Downsize 4WD
1983-2004
X -Cam Bolt
Fac Adj.41-8246
Fac Adj.41-8246
-61
- / -0.40 / 0.40 - Non Adj. Non Adj. - - / -
Chevrolet C Series Pickup 2WD
1975-1986
X Shim CC CC - - / - - Non Adj. Non Adj. - - / -
Chevrolet C10/C20 Suburban 2WD
1972-1986
X Shim CC CC - - / - - Non Adj. Non Adj. - - / -
Chevrolet C/k Series Pickup
1988-1999
X Cam Bolt 41-82505 41-82505 99 88-7491 0.60 / 0.60 - Non Adj. Non Adj. - - / -
Chevrolet C Series Pickup 2WD
1992-1998
X Cam Bolt 41-82505 41-82505 99 88-7491 0.60 / 0.60 - Non Adj. Non Adj. - - / -
Chevrolet C Series Pickup w/rear drum brakes 2WD
1995-2000
X -Cam Bolt
Fac Adj.41-82505
Fac Adj.41-82505
-99 88-7491
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
Chevrolet Kodiak C4500 C5500 2WD
2005-2009
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Chevrolet Kodiak C4500 C5500 4WD
2005-2009
X BushingBushing
44-602044-5037
44-602044-5037
8785
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Chevrolet Camaro1967-1981
X Shim CC CC - - / - - Non Adj. Non Adj. - - / -
Chevrolet Camaro1982-1992
X - Fac Adj. Fac Adj. - 88-892288-8923 - / - - Non Adj. Non Adj. - - / -
Chevrolet Camaro1993-2002
X - Fac Adj. Fac Adj. - 88-8925 - / - - Non Adj. Non Adj. - - / -
Chevrolet Camaro2010-2014
X Axis Cam 41-216 Non Adj. 57 - / - -Cam Bolt
Fac Adj.46-182
Fac Adj.46-182
-68
- / -0.30 / 0.30
Chevrolet Caprice2012-2014
X Axis CamMagna Cam
41-21441-1572 Fac Adj. 57
560.30 / -0.30 Cam Bolt 46-182 46-182 68 0.30 / 0.30
Chevrolet Captiva2008-2014
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30 Camber Kit 44-775 44-775 100 0.30 / 0.30
Chevrolet2012-2014
X Axis CamMagna Cam
41-21441-1582
5756
0.30 0.30
Chevrolet Cavalier1982-1994
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Chevrolet Cavalier1995-2005
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Chevrolet Celebrity1982-1990
X-
Magna CamCam Bolt
Fac Adj.41-1602
41-8245Non Adj.
-5661
- / -0.30 0.30
ShimShim
46-13001
46-2400146-13001
46-240017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Chevrolet Citation1980-1983
X-
Magna CamCam Bolt
Fac Adj.41-1602
41-8245Non Adj.
-5661
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472 88-050
88-1110
0.60 / 0.600.60 / 0.60
Chevrolet Cobalt2005-2010
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 Shim 46-15201 46-15201 74 0.60 / 0.60
Chevrolet Colorado 2WD2004-2012
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
CHEVROLET CHEVROLET
14A
PPLI
CAT
ION
GU
IDE MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Chevrolet Colorado 4WD2004-2012
X
-Quick Cam
Replacement Pins
Fac Adj.44-250744-2508
Fac Adj.44-250744-2508
-9595
- / -0.30 / 0.300.30 / 0.30
- Non Adj. Non Adj. - - / -
Chevrolet Corvette1963-1982
X -Shim
Fac Adj.CC CC -
-- / --
-Cam Bolt
Fac Adj.41-8243
Fac Adj.46-602046-6030
-61
- / -0.60 / 0.30
0.30
Chevrolet Corvette1984-2014
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Chevy Cruze2011-2015
X Axis CamMagna Cam
41-21241-1473 Non Adj. 57
560.30 / -0.30 Shim 46-7100 46-7100 - - / -
Chevrolet El Camino 2WD1965-1987
X Shim CC CC - - / - - Non Adj. Non Adj. - - / -
Chevrolet Equinox2005-2014
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - 44-775 44-775 100 0.30 / 0.30
Express Van1996-2002
X -Cam Bolt
Fac Adj.41-82505
Fac Adj.41-82505
-99
- / -0.60 / 0.60
Chevrolet Express Van 1500,2500,3500 2WD
2003-2014
X
-Quick CamCamber Kit
Replacement Pins
Bushing
Fac Adj.44-250641-825144-250844-25095
Fac Adj.44-250641-825144-250844-25095
-95999595
- / -0.30 / 0.300.50 / 0.500.30 / 0.300.80 / 0.80
- Non Adj. Non Adj. - - / -
Chevrolet Express Van,1500,2500,3500 4WD
2003-2014
X
-Quick Cam
Replacement Pins
Camber KitBushing
Fac Adj.44-250644-250841-825144-25095
Fac Adj.44-250644-250841-825144-25095
-95959995
- / -0.30 / 0.300.30 / 0.300.50 / 0.500.80 / 0.80
- Non Adj. Non Adj. - - / -
Chevrolet HHR2006-2011
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 Shim 46-15201 46-15201 74 0.60 / 0.60
Chevrolet Impala2000-2014
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
Chevrolet K Series (Dana 60) 4WD
1961-1990
X Camber Kit 44-910 Non Adj. 103 0.30 / - - Non Adj. Non Adj. - - / -
Chevrolet K Series (except Dana 60) 4WD
1970-1986
X Bushing 44-2460 44-2460 - 88-7090 0.80 / 0.80 - Non Adj. Non Adj. - - / -
Chevrolet Suburban 4WD1970-1986
X Bushing 44-2460 44-2460 - 88-7090 0.80 / 0.80 - Non Adj. Non Adj. - - / -
Chevrolet K Series (ProRYDE)
1988-1998
X 64-1000G
Chevrolet Suburban 4WD1992-1999
X Cam Bolt 41-82505 41-82505 99 88-709088-7491
0.60 / 0.60 - Non Adj. Non Adj. - - / -
Chevrolet LLV Postal Vehicle 2WD
1987-1995
X Shim CC CC - - / - - Non Adj. Non Adj. - - / -
Chevrolet Lumina1990-1994
X-
ShimMagna Cam
Fac Adj.45-70104
41-212Non Adj.
--
57 88-060
- / -0.50 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657 88-8923
- / -0.30 0.30
Chevrolet Lumina1995-2001
X -Shim
Fac Adj.45-70104 Non Adj. -
-88-060
88-1112- / -
0.50
-Magna Cam
Axis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657 88-8923
- / -0.30 0.30
Chevrolet Lumina APV1990-1996
X-
Magna CamCam Bolt
Fac Adj.41-1602
41-8245Non Adj.
-5661
- / -0.30 0.30
ShimShim
46-13001
46-2400146-13001
46-240017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Chevrolet Malibu/MonteCarlo
1965-1983
X Shim CC CC - - / - - Non Adj. Non Adj. - - / -
Chevrolet Malibu1997-2003
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-14441-212
Fac Adj.-
5657
- / -0.30 0.30
Chevrolet Malibu / Maxx2004-2012
XMagna Cam
Axis CamMagna Cam
41-1582
41-21241-1473
Non Adj.565756
0.30 / -0.30
-
-Cam Bolt
Fac Adj.46-425 Fac Adj. -
73- / -
0.30
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
CHEVROLET CHEVROLET
15
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Chevrolet Malibu / Maxx2013-2015
XMagna Cam
Axis CamMagna Cam
41-1582
41-21241-1473
Non Adj.565756
0.30 / -0.30
-- Fac Adj. Fac Adj. - - / -
Chevrolet Metro1998-2001
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Fac Adj. - - / -
Chevrolet Monte Carlo1995-1999
X -Shim
Fac Adj.45-70104 Fac Adj. -
-88-060
88-1112- / -
0.50
-Magna Cam
Axis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Chevrolet Monte Carlo2000-2007
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
Chevrolet Nova1969-1979
X Shim CC CC - - / - - Non Adj. Non Adj. - - / -
Chevrolet Nova FWD1985-1988
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
ShimShim
Magna CamAxis Cam
46-13001
46-24001
41-1473
41-212
Fac Adj.46-13001
46-24001
74725657
88-343
0.60 / -0.60 / 0.600.30 / 0.60
0.30
Chevrolet P Series Van 2WD
1977-1999
X Shim CC CC - - / - - Non Adj. Non Adj. - - / -
Chevrolet P Series Van/I Beam Axle 2WD
1985-1999
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Chevrolet Prizm1998-2002
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
0.30 / -0.30 0.30
-Axis Cam
Fac Adj.41-212 Fac Adj. -
57- / -
0.30
Chevrolet R Series Pickup 2WD
1987-1988
X Shim CC CC - - / - - Non Adj. Non Adj. - - / -
Chevrolet S10 Blazer 2WD1983-1994
X Shim CC CC - - / - - Non Adj. Non Adj. - - / -
Chevrolet Silverado HD 2500 2WD/4WD 1999 X
-BushingBall Joint
Control Arm W/BJ
Fac Adj.44-251044-249844-2730
Fac Adj.44-251044-249844-2730
-969293
88-7950A
- / -0.80 / 0.800.90 / 0.900.60 / 0.60
- Non Adj. Non Adj. - - / -
Chevrolet Sierra/Silverado 1500 (ProRYDE)
1999-2006
X 64-1000G
Chevrolet Silverado 1500 2WD/4WD
1999-2006
X
-Bushing
Camber KitReplacement
PinsQuick CamBall Joint
Control Arm W/BJ
Fac Adj.44-25095
41-825144-250844-250644-249944-2725
Fac Adj.44-25095
41-825144-250844-250644-249944-2725
-959995959296
88-7950A
- / -0.80 / 0.800.50 / 0.500.30 / 0.300.30 / 0.300.09 / 0.900.60 / 0.60
- Non Adj. Non Adj. - - / -
Chevrolet Silverado 1500 2WD/4WD
2007-2014
X
-Bushing
Camber KitReplacement
PinsQuick CamBall Joint
Fac Adj.44-25095
41-825144-250844-2506
44-2726L
Fac Adj.44-25095
41-825144-250844-2506
44-2726L
-9599959596
88-7950A
- / -0.80 / 0.800.50 / 0.500.30 / 0.300.30 / 0.300.60 / 0.60
- Non Adj. Non Adj. - - / -
Chevrolet Silverado 1500 (ProRYDE)
2007-2013
X 74-1000G
Chevrolet Sierra/Silverado HD 1500/2500 (ProRYDE)
2001-2010
X 64-1200G
Chevrolet Silverado HD 2500/3500 2WD/4WD
2011-2014
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Chevrolet Silverado/Suburban/Yukon XL 2500/3500HD (ProRYDE)
2011-2014
X 64-1400G
Chevrolet Sierra/Silverado 3500 (ProRYDE)
2002-2009
X 64-1200G
Chevy Sonic2012-2015
X Axis CamMagna Cam
41-21441-1572
5756
0.30 0.30 Shim 46-7100 46-7100 - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
CHEVROLET CHEVROLET
16A
PPLI
CAT
ION
GU
IDE
CHEVROLET CHEVROLET
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Chevy Spark2012-2015
X Axis CamMagna Cam
41-21241-1473
5756
0.30 0.30 Caster Kit 46-7100 46-7100 - - / -
Chevrolet Spectrum1985-1988
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Chevrolet Sprint1985-1988
X-
Magna CamWedge Kit
Fac Adj.41-1473
41-300Non Adj.
-5662
- / -0.30 0.30
- Non Adj. Fac Adj. - - / -
Chevrolet SSR AWD2003-2006
X Camber-CasterTool 88-8929 88-8929 - - / - - Non Adj. Non Adj. - - / -
Chevrolet Suburban 1500 2WD/4WD
2000-2014
X
-Bushing
Camber KitQuick Cam
Replacement Pins
Fac Adj.44-25095
41-825144-250644-2508
Fac Adj.44-25095
41-825144-250644-2508
-95999595
88-7950A
- / -0.80 / 0.800.50 / 0.500.30 / 0.300.30 / 0.30
- Non Adj. Non Adj. - - / -
Chevrolet Suburban/Yukon XL 1500 (ProRYDE)
2000-2006
X 64-1000G
Chevrolet Suburban/Yukon XL 1500 (ProRYDE)
2007-2013
X 74-1000G
Chevrolet Suburban 2500HD 2WD
2000-2013
X
-Bushing
Replacement Pins
Camber KitQuick CamBall Joint
Fac Adj.44-251044-250841-825144-250644-2498
Fac Adj.44-251044-250841-825144-250644-2498
-9695999592
- / -0.80 / 0.800.30 / 0.300.50 / 0.500.30 / 0.300.90 / 0.90
- Non Adj. Non Adj. - - / -
Chevrolet Suburban 2500HD 4WD
2000-2013
X
-Bushing
Replacement Pins
Camber KitQuick CamBall Joint
Fac Adj.44-251044-250841-825144-250644-2498
Fac Adj.44-251044-250841-825144-250644-2498
-9695999592
- / -0.80 / 0.800.30 / 0.300.50 / 0.500.30 / 0.300.90 / 0.90
- Non Adj. Non Adj. - - / -
Chevrolet Suburban/Yukon XL 2500 (ProRYDE)
2000-2010
X 64-1200G
Chevrolet Tahoe/Rear drum brakes 2WD
1995-2000
X -Cam Bolt
Fac Adj.41-82505 41-82505 -
99- / 0.900.90 - Non Adj. Non Adj. - - / -
Chevrolet Tahoe 4WD1995-2000
X -Cam Bolt
Fac Adj.41-82505
Fac Adj.41-82505
-99 88-7491
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
Chevrolet Tahoe 2WD/4WD
2000-2014
X
-Bushing
Camber KitQuick Cam
Replacement Pins
Fac Adj.44-25095
41-825144-250644-2508
Fac Adj.44-25095
41-825144-250644-2508
-95999595
88-7950A
- / -0.80 / 0.800.60 / 0.300.30 / 0.300.30 / 0.30
- Non Adj. Non Adj. - - / -
Chevrolet Tahoe/Yukon (ProRYDE)
2000-2006
X 64-1000G
Chevrolet Tahoe/Yukon (ProRYDE)
2007-2013
X 74-1000G
Chevrolet Tracker 2WD/4WD
1989-2005
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
- Non Adj. Non Adj. - - / -
Chevrolet Trail Blazer 2WD/4WD
2002-2009
X Camber-CasterTool 88-8929 88-8929 - 88-8929 - / - - Non Adj. Non Adj. - - / -
Chevrolet Traverse2009-2015
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
-Cam Bolt
Camber Kit
Fac Adj.41-825646-421
Non Adj.-
9993 88-7996A
- / -0.30 1.00
Chevrolet Uplander FWD/AWD
2005-2009
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30
-ShimShim
Fac Adj.46-1300 SERIES1
46-24001
Fac Adj.46-1300SERIES1
46-24001
-7472
- / -0.60 / 0.600.60 / 0.60
Chevrolet Venture Van1997-2005
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-13001
46-2400146-13001
46-240017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Chevrolet Venture AWD2002-2005
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
17
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Chevrolet Volt2011-2015
X Axis CamMagna Cam
41-21241-1473 Non Adj. 57
560.30 / -0.30
CHRYSLER
Chrysler 2002011-2014
X Axis Cam 41-214 Non Adj. 57 0.30 / - ShimRear Arm
46-1500 SERIES1
46-2176
Fac Adj.46-1500SERIES1
7465
0.60 / -- / 0.60
Chrysler 300C AWD2004-2014
X -Cam Bolt
Fac Adj.41-8260
Fac Adj.41-8260
--
- / -0.90 / 0.90 - 46-162 Fac Adj. 68 0.60 / -
Chrysler 300C 2WD2004-2008
X
Ball JointCamber KitBall JointBall Joint
41-23241-8259
41-8321L41-
8321R
41-23241-8259
41-8321L
41-8321R
60-
6565
0.90 / 0.900.90 / 0.900.60 / 0.600.60 / 0.60
Bushing 46-162 Fac Adj. 68 0.60 / -
Chrysler 300C 2WD2004-2014
X Ball JointCamber Kit
41-23241-8259
41-23241-8259
60-
0.90 / 0.900.90 / 0.90 Bushing 46-162 Fac Adj. 68 0.60 / -
Chrysler 300M/LHS1994-2004
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
41-200188-7200A
- / -0.30 0.30
- Non Adj. Fac Adj. - - / -
Chrysler Cirrus1995-2000
X -Ball Joint
Fac Adj.41-230 41-230 -
60 88-7800A- / 0.900.90 - Fac Adj. Fac Adj. - - / -
Chrysler Concorde LH Yorker
1993-1997
X Magna CamAxis Cam
41-1602
41-216Non Adj. 56
57 88-7100A0.30 / -0.30 - Non Adj. Fac Adj. - - / -
Chrysler Concorde1998-2004
X Magna CamAxis Cam
41-1602
41-216Non Adj. 56
57 88-7200A0.30 / -0.30 - Non Adj. Fac Adj. - - / -
Chrysler Crossfire2004-2008
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Chrysler Dynasty (Canada)
1991-1993
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Chrysler E Class/Exe Sedan
1983-1984
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Chrysler Fifth Avenue 1989 X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Chrysler Imperial1990-1993
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Chrysler Laser1984-1986
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Chrysler LeBaron/GTS1982-1995
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Chrysler New Yorker , LHS1994-1997
X Magna CamAxis Cam
41-1602
41-216Non Adj. 56
57 88-7100A0.30 / -0.30 - Non Adj. Fac Adj. - - / -
Chrysler New Yorker/Ex/Fifth Ave
1983-1993
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Chrysler Pacifica2004-2008
X Magna CamAxis Cam
41-1572
41-214Non Adj. 56
570.30 / -0.30
-Bushing
Non Adj.46-162 Fac Adj. -
68- / -
0.60
Chrysler PT Cruiser2001-2010
X
-Magna Cam
Axis CamPerformance Kit
Fac Adj.41-1572
41-21441-5572
Non Adj.
-5657-
- / -0.30 0.30
-
ShimShim
Performance Kit
46-10001
46-21001
41-5572
46-10001
46-21001
7372- 88-343
0.60 / 0.600.60 / 0.60
-
Chrysler Sebring Coupe1995-2000
XBall Joint
Performance KitPerformance Kit
41-55041-553041-553
41-55060-- 88-7800A
0.90 / 0.90--
ShimPerformance Kit
46-217041-5530 Fac Adj. 72
-0.30 / -
-
Chrysler Sebring Convertible
1996-2010
X Ball JointBall Joint
41-23041-229
41-23041-229
6060 88-7800A
0.90 / -0.90 / 0.90 - Fac Adj. Fac Adj. - - / -
Chrysler Sebring Sedan1996-2005
X Ball Joint 41-230 41-230 60 0.90 / 0.90 - Non Adj. Fac Adj. - 88-7800A - / -
Chrysler Sebring Coupe2001-2010
XMagna Cam
Axis CamPerformance Kit
41-1592
41-21641-4590
Non Adj.565758
0.30 / -0.30
-
ShimPerformance Kit
46-217041-4590 Fac Adj. 72
580.30 / -
-
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
CHEVROLET CHRYSLER
18A
PPLI
CAT
ION
GU
IDE
CHRYSLER DODGE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Chrysler Sebring Sedan & Conv
2007-2010
X Magna CamAxis Cam
41-1572
41-214Non Adj. 56
570.30 / -
--
Rear ArmNon Adj.46-2175 Fac Adj. -
65- / --
Chrysler TC by Maserati1990-1991
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Chrysler Twn Country Wgn
1982-1988
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Chrysler Town/CtryVan FWD
1990-1995
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-11001
46-2200146-11001
46-220017472 88-343
0.60 / 0.600.60 / 0.60
Chrysler Town/CtryVan AWD
1992-1995
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 - Non Adj. Non Adj. - - / -
Chrysler Town/CtryVan FWD
1996-2014
X
-Magna Cam
Axis CamCam Bolt
Fac Adj.41-1572
41-21441-8249
Non Adj.
-5657-
- / -0.30 0.30 0.30
Shim 46-11201 46-11201 74 88-34388-4519 0.60 / 0.60
Chrysler Town/CtryVan AWD
1997-2014
X
-Magna Cam
Axis CamCam Bolt
Fac Adj.41-1572
41-21441-8249
Non Adj.
-5657-
- / -0.30 0.30 0.30
- Non Adj. Non Adj. - - / -
Chrysler Voyager Van2000-2008
X Magna CamAxis Cam
41-1572
41-214Non Adj. 56
570.30 / -0.30 Shim
46-1120 SERIES1 Non Adj. 74 0.60 / -
DAEWOO
Daewoo Lanos1999-2002
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Daewoo Malteze1999-2002
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Daewoo Leganza1999-2002
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Daewoo Nubira1999-2002
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
DAIHATSU
Daihatsu Charade1988-1992
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30
Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30
Daihatsu Charade GTX 1992 X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Daihatsu Rocky1990-1992
X Shim CC CC - - / - - Non Adj. Non Adj. - - / -
DODGE
Dodge 4001982-1983
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Dodge 6001983-1988
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Dodge Aries1981-1989
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Dodge Avenger1995-2000
XBall Joint
Performance KitPerformance Kit
41-55041-553041-553
41-55060-- 88-7800A
0.90 / 0.90--
ShimPerformance Kit
46-217041-5530 Fac Adj. 72
-0.30 / -
-
Dodge Avenger2008-2010
X Axis Cam 41-214 Non Adj. 57 0.30 / - -Rear Arm
Non Adj.46-2175 Fac Adj. -
65- / --
Dodge Avenger2011-2014
X Axis Cam 41-214 Non Adj. 57 0.30 / - -Rear Arm
Non Adj.46-2176 Fac Adj. -
65- / --
Dodge B100/200/300/350 2WD
1979-1983
X -Cam Bolt
Fac Adj.41-8243
Fac Adj.41-8243
-61
- / -0.40 / 0.40 - Non Adj. Non Adj. - - / -
Dodge Caliber2007-2012
X Magna CamAxis Cam
41-1572
41-214Non Adj. 56
570.30 / -0.30
-Rear Arm
Non Adj.46-2178
Fac Adj.46-2174
-94
- / -0.60 / -
Dodge Caravan Van FWD1984-1995
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-11001
46-2200146-11001
46-220017472 88-343
0.60 / 0.600.60 / 0.60
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
19
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Dodge Cavavan AWD1990-1995
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 - Non Adj. Non Adj. - - / -
Dodge Caravan AWD1996-2014
XMagna Cam
Axis CamCam Bolt
41-1572
41-21441-8249
Non Adj.5657-
0.30 / -0.30 0.30
- Non Adj. Non Adj. - - / -
Dodge Caravan Van FWD1996-2015
XMagna Cam
Axis CamCam Bolt
41-1572
41-21441-8249
Non Adj.5657-
0.30 / -0.30 0.30
Shim 46-11201 46-11201 74 88-343 0.60 / 0.60
Dodge Challenger 2wd 2008 X
Ball JointCamber KitBall JointBall Joint
41-23241-8259
41-8321L41-
8321R
41-23241-8259
41-8321L
41-8321R
60-
6565
0.90 / 0.900.90 / 0.900.60 / 0.600.60 / 0.60
Bushing 46-162 Fac Adj. 68 0.60 / -
Dodge Challenger 2wd2009-2014
X Ball JointCamber Kit
41-23241-8259
41-23241-8259
60-
0.90 / 0.900.90 / 0.90 Bushing 46-162 Fac Adj. 68 0.60 / -
Dodge Charger1983-1987
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Dodge Charger AWD2006-2014
X Ball JointCamber Kit
41-23241-8260
41-23241-8260
60-
0.90 / 0.900.90 / 0.90 Bushing 46-162 Fac Adj. 68 0.60 / -
Dodge Charger 2WD2006-2008
X
Ball JointCamber KitBall JointBall Joint
41-23241-8259
41-8321L41-
8321R
41-23241-8259
41-8321L
41-8321R
60-
6565
0.90 / 0.900.90 / 0.900.60 / 0.600.60 / 0.60
Bushing 46-162 Fac Adj. 68 0.60 / -
Dodge Charger 2WD2009-2014
X Ball JointCamber Kit
41-23241-8259
41-23241-8259
60-
0.90 / 0.900.90 / 0.90 Bushing 46-162 Fac Adj. 68 0.60 / -
Dodge Colt / Vista1979-1995
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30 - Non Adj. Non Adj. - - / -
Dodge Colt Wagon 2WD/4WD
1992-1995
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Fac Adj. - - / -
Dodge Ram 50/D50/Arrow 2WD
1980-1993
X - Fac Adj. CC - - / - - Non Adj. Non Adj. - - / -
Dodge Dakota 2WD/4WD1987-2011
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Dodge Dart1965-1976
X Cam Bolt 41-8243 41-8243 61 0.60 / 0.60 - Non Adj. Non Adj. - - / -
Dodge Daytona1984-1993
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Dodge Durango 2WD/4WD1998-2009
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Dodge Durango2011-2014
X-
Ball JointCamber Kit
Fac Adj.44-249544-794
Fac Adj.44-249544-795
-91101
- / -0.90 / 0.90
- / -- Non Adj. Fac Adj. - - / -
Dodge Dynasty1988-1993
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Dodge Intrepid1993-1997
X Magna CamAxis Cam
41-1602
41-216Non Adj. 56
57 88-7100A0.30 / -0.30 - Non Adj. Fac Adj. - - / -
Dodge Intrepid1998-2004
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
41-200188-7200A
- / -0.30 0.30
- Non Adj. Fac Adj. - - / -
Dodge Journey2009-2010
X Axis CamMagna Cam
41-21441-1572 Non Adj. 57
560.30 / -0.30 Rear Arm 46-2175 Fac Adj. 65 - / -
Dodge Journey2011-2014
X Axis CamMagna Cam
41-21441-1572 Non Adj. 57
560.30 / -0.30 Rear Arm 46-2176 Fac Adj. 65 - / -
Dodge Lancer1985-1989
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Dodge Magnum 2WD2005-2008
X
Ball JointCamber KitBall JointBall Joint
41-23241-8259
41-8321L41-
8321R
41-23241-
8321L41-
8321R
60-
6565
0.90 / 0.900.90 / 0.600.60 / 0.60
0.60
Camber Kit 46-162 Fac Adj. 68 0.60 / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
DODGE DODGE
20A
PPLI
CAT
ION
GU
IDE
DODGE DODGE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Dodge Magnum 4WD2005-2008
X - Fac Adj. Fac Adj. - - / - Bushing 46-162 Fac Adj. 68 0.60 / -
Dodge Monaco1990-1992
X Wedge Kit 41-305 Non Adj. 62 0.30 / - ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Dodge Neon1995-2005
XMagna Cam
Axis CamPerformance Kit
41-1572
41-21441-5570
Non Adj.5657-
0.30 / -0.30
-
Wedge KitPerformance Kit
Axis Cam
41-30041-557041-212
Fac Adj.62-
57
0.30 / --
0.30
Dodge Omni/0241978-1990
X -Cam Bolt
Fac Adj.41-8248 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Dodge Ram Raider 2WD1987-1989
X - Fac Adj. CC - - / - - Non Adj. Non Adj. - - / -
Dodge Full size P/U ind. front suspension 2WD
1994-2002
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Dodge 1500/2500 L.D. 4WD
1994-1999
X Ball Joint 44-2492Fac Adj.44-249241-8256
91 88-7900A
0.90 / - 0.90 0.30
- Non Adj. Non Adj. - - / -
Dodge Ram 1500 (ProRYDE)
1994-2001
X 71-2500D
Dodge 1500/2500 L.D. 4WD
2000-2001
X Ball Joint 44-2494 Fac Adj.44-2494 91 88-7900A
0.90 / - 0.90 - Non Adj. Non Adj. - - / -
Dodge 1500 2WD/4WD2002-2005
X Camber Kit 44-792 44-792 101 88-8928 0.50 / 0.50 - Non Adj. Non Adj. - - / -
Dodge Ram 1500 (ProRYDE)
2002-2005
X 64-2000D
Dodge Ram 1500 2WD/4WD (5-lug) (Exc. Mega Cab)
2006-2010
X Ball Joint 44-2489 44-2489 97 0.90 / 0.90 - Non Adj. Non Adj. - - / -
Dodge Mega Cab (ProRYDE)
2006-2009
X 71-2500D
Dodge Ram 1500 (Mega Cab) (8-lug) 2wd
2006-2010
X - Fac Adj. Fac Adj. - - / -
Dodge Ram 1500 (Mega Cab) (8-lug) 4wd
2006-2010
X - Non Adj. Fac Adj. - - / -
Dodge Ram 1500 (ProRYDE)
2006-2010
X 74-2000D
Dodge Full Size Van 2WD1995-2003
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Dodge 2500 HD/3500 solid frt axle 2WD
1994-2002
X BushingBushing
44-500044-5032
44-500044-5032
8384
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Dodge 2500 HD /3500 4WD1994-1999
X BushingBushing
44-500044-5032
44-500044-5032
8384
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Dodge 2500 HD /3500 4WD2000-2002
X Ball Joint 44-2496 Fac Adj.44-824 90 0.90 / -
0.30 - Non Adj. Non Adj. - - / -
Dodge Ram 2500/3500 (ProRYDE)
2000-2009
X 71-2500D
Dodge Truck 2500/3500 2WD
2003-2010
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Dodge 2500/3500 P/U Old body style 4WD
2003-2005
X Ball Joint 44-2496 Fac Adj. 90 0.90 / - - Non Adj. Non Adj. - - / -
Dodge 2500/3500 P/U NS 4WD
2003-2010
X Ball Joint 44-2497 Fac Adj. 90 0.90 / - - Non Adj. Non Adj. - - / -
Dodge 2500 HD /3500 2wd/mono beam
2003-2010
X -Ball Joint
Fac Adj.44-2497 Fac Adj. -
90- / -
0.90
Dodge 4500 / 55002008-2010
X Ball Joint 44-2610 44-2610 96 1.00 / 1.00 - Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
21
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Dodge Ramcharger 4WD1974-1993
X Bushing 44-2460 44-2460 - 88-7090 0.80 / 0.80 - Non Adj. Non Adj. - - / -
Dodge Ramcharger 2WD1977-1993
X -Cam Bolt
Fac Adj.41-8243
Fac Adj.41-8243
-61
- / -0.40 / 0.40 - Non Adj. Non Adj. - - / -
Dodge Rampage1982-1984
X -Cam Bolt
Fac Adj.41-8248 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Dodge Shadow1987-1994
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Dodge Spirit1989-1995
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Dodge Sprinter2003-2006
X ShimShim
42-443142-4434 Non Adj. 88
880.30 / -0.30 - Non Adj. Non Adj. - - / -
Dodge Sprinter2007-2009
X Axis Cam 41-214 Non Adj. 57 0.30 / - - Non Adj. Non Adj. - - / -
Dodge Sprinter 2WD 35002007-2009
X Axis Cam 41-216 Non Adj. 57 0.30 / - - Non Adj. Non Adj. - - / -
Dodge Stealth 4x2 & AWD1991-1996
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Dodge Stratus Sedan1995-2006
X -Ball Joint
Fac Adj.41-230 41-230 -
60 88-7800A- / 0.900.90 - Fac Adj. Fac Adj. - - / -
Dodge Stratus Coupe1995-2000
X -Ball Joint
Fac Adj.41-550 41-550 -
60- / -
0.90 Shim 46-2170 Fac Adj. 72 0.30 / -
Dodge Stratus Coupe2001-2005
X Magna CamAxis Cam
41-1592
41-216Non Adj. 56
570.30 / -0.30 Shim 46-2170 Fac Adj. 72 0.30 / -
Dodge Viper RT/10Roadster
1992-1995
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Dodge Viper Roadster/GTS Coupe
1996-2006
X - Fac Adj. Fac Adj. - - / - - Non Adj. Fac Adj. - - / -
Dodge W100 thruW350 with 3500lb axle 4WD
1986-1989
X Bushing 44-2460 44-2460 - 0.80 / 0.80 - Non Adj. Non Adj. - - / -
Dodge Full size P/U ind. front suspension 2WD
1972-1993
X Cam Bolt 41-8243 41-8243 61 0.40 / 0.40 - Non Adj. Non Adj. - - / -
Dodge W200-W350 w/3500 lb. axle 4WD
1975-1980
X Bushing 44-2460 44-2460 - 88-7090 0.80 / 0.80 - Non Adj. Non Adj. - - / -
EAGLE
Eagle Medallion1988-1989
X Magna CamWedge Kit
41-1602
41-305Non Adj. 56
620.30 / -0.30
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Eagle Premier1988-1992
X Magna CamWedge Kit
41-1602
41-305Non Adj. 56
620.30 / -0.30
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Eagle Summit1989-1992
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Eagle Summit1993-1996
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Eagle Talon 2WD/4WD1990-1994
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Eagle Talon 2WD/4WD1995-1998
XBall Joint
Performance KitPerformance Kit
41-55041-553041-553
41-55060-- 88-7800A
0.90 / 0.90--
ShimPerformance Kit
46-217041-5530 Fac Adj. 72
-0.30 / -
-
Eagle Vision1993-1997
X Magna CamAxis Cam
41-1602
41-216Non Adj. 56
57 88-7100A0.30 / -0.30 - Non Adj. Fac Adj. - - / -
Eagle Vista Wagon 2WD/4WD
1989-1991
X Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30 - Non Adj. Non Adj. - - / -
FIAT
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
DODGE FIAT
22A
PPLI
CAT
ION
GU
IDE
FIAT FORD
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Fiat 128 Coupe Hatch Wagon
1971-1979
X Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30 - Non Adj. Non Adj. - - / -
Fiat 131/Brava1975-1981
X Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30 - Non Adj. Non Adj. - - / -
Fiat 500/ 500L2012-2014
XAxis Cam
Magna CamAxis Cam
41-21241-1473
41-210Non Adj.
575659
0.30 / -0.30 0.30
ShimShim
46-730046-7300
46-730046-7300
--
0.60 / 0.600.60 / 0.60
Fiat Strada1979-1982
X Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Fiat X1/91974-1982
X Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30
Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30
FORD
Ford Aerostar 2WD/4WD1986-1997
X -Shim
Fac Adj.CC
Fac Adj.CC
-- 88-7414 - / -
- / - - Non Adj. Non Adj. - - / -
Ford Aspire1994-1997
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Ford Bronco 4WD1980-1996
X BushingBushing
44-500044-5032
44-500044-5032
8384 88-501
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford Bronco II 2WD1984-1988
X Bushing 42-100 44-9412 - 1.00 / 1.50 - Non Adj. Non Adj. - - / -
Ford Bronco II 4WD1984-1989
X BushingBushing
44-60044-5035
44-60044-5035
-- 88-501
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford Bronco II 2WD1989-1990
X BushingBushing
42-95044-5094
42-95044-5094
8685 88-501
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford Bronco II 4WD 1990 X BushingBushing
42-95044-5094
42-95044-5094
8685
1.00 / 0.801.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford Contour1995-2000
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Ford Crown Victoria/LTD1992-2002
X - Fac Adj. Fac Adj. - 88-9412 - / - - Non Adj. Non Adj. - - / -
Ford Crown Victoria2003-2011
X -Cam Bolt
Fac Adj.46-143 Fac Adj. -
68- / -
1.00 - Non Adj. Non Adj. - - / -
Ford E100/E150 2WD1980-1991
X - Non Adj. 42-4413 - 88-2228 - / 1.50 - Non Adj. Non Adj. - - / -
Ford E150, E250, E350, E450 2WD
1992-2014
XBushingBushingBushing
42-95044-509442-970
42-95044-509442-970
868588
1.00 / 1.001.00 / 1.001.00 / 1.00
- Non Adj. Non Adj. - - / -
Ford E250/E350 2WD1980-1991
X - Non Adj. 42-4412 - 88-2228 - / 1.50 - Non Adj. Non Adj. - - / -
Ford Edge2007-2014
X Axis CamMagna Cam
41-21641-1592 Non Adj. 57
560.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Ford Escape FWD2001-2012
XMagna Cam
Cam BoltAxis Cam
41-1473
41-30841-212
Fac Adj.566357
- / ---
-Rear Arm
Non Adj.46-2179 Fac Adj. -
78- / --
Ford Escape 4WD2001-2012
X Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
-Rear Arm
Non Adj.46-2179 Non Adj. -
78- / --
Ford Escape FWD/AWD2013-2015
X - Non Adj. Fac Adj. - - / - Rear Arm 46-2188 Fac Adj. 80 0.90 / -
Ford Escort1981-1985
X - Non Adj. Non Adj. - - / - Wedge Kit 46-201 Fac Adj. 68 0.40 / -
Ford Escort1986-1990
X Tower Plate 41-4601 41-4601 64 88-4602 0.50 / 0.50 Fac Adj. -
Ford Escort1991-1996
X
-Magna Cam
Axis CamPerformance Kit
Wedge Kit
Fac Adj.41-1462
41-21241-446041-312
Non Adj.
-56575862
- / -0.30 0.30
-0.30
Magna CamAxis Cam
Performance KitCaster Spacer
41-1473
41-21241-446041-312
46-205
56575862
0.30 / 0.300.40
-0.30
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
23
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Ford Escort1997-2002
X
-Magna Cam
Axis CamPerformance Kit
Fac Adj.41-1462
41-21241-4460
Fac Adj.
-565758
- / -0.30 0.30
-
Magna CamAxis Cam
Performance Kit
41-1473
41-21241-4460
Fac Adj.46-205
565758
0.30 / -0.30 / 0.40
-
Ford Escort X 21998-2003
X-
Magna CamAxis Cam
Fac Adj.41-1462
41-212Fac Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Ford Excursion 2WD2000-2005
XBushingBushingBushing
42-95044-509442-970
42-95044-5094
868588
1.00 / 1.001.00 / 1.00
1.00 - Non Adj. Non Adj. - - / -
Ford Excursion 4WD2000-2005
X BushingBushing
44-500044-5032
44-500044-5032
8384
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford EXP1982-1985
X - Non Adj. Non Adj. - - / - Wedge Kit 46-201 Fac Adj. 68 0.40 / -
Ford EXP1986-1988
X Tower Plate 41-4601 41-4601 64 88-4602 0.50 / 0.50 Wedge Kit 46-201 Fac Adj. 68 0.40 / -
Ford Expedition 1sr design (cam only) 2WD/4WD
1997-1998
X Camber Kit 42-7776 42-7776 - 88-7829 0.30 / 0.30 - Non Adj. Non Adj. - - / -
Ford Expedition 2nd design (cam bolt) 2WD/4WD
1997-2002
X Cam Bolt 42-7787 42-7787 - 0.50 / 0.50 - Non Adj. Non Adj. - - / -
Ford Expedition (ProRYDE)
1997-2002
X 64-3000F
Ford Expedition 2WD/4WD2003-2006
X Camber Kit 44-7868 44-7868 100 0.30 / 0.30 Cam Bolt 44-784 46-9813 100 0.50 / 0.50
Ford Expedition (ProRYDE)
2003-2008
X74-3000FLeveling
Kit
Ford Expedition 2WD/4WD2007-2012
X Camber KitCamber Kit
44-79044-791
44-79044-791
101101
0.30 / 0.300.30 / 0.30 - Fac Adj. Fac Adj. - - / -
Ford Explorer 2WD/4WD1991-1994
X BushingBushing
42-95044-5094
42-95044-5094
8685
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford Explorer 2WD1995-2001
X Camber KitCam Bolt
44-76744-768 44-767 89
98 88-78290.30 / 0.30
0.30 - Non Adj. Non Adj. - - / -
Ford Explorer/Explorer Sport 4WD
1995-2001
X Camber KitCam Bolt
44-76744-768
44-76744-768
8998
0.30 / 0.300.30 / 0.30 - Non Adj. Non Adj. - - / -
Ford Explorer 2WD/4WD 2002 XAlignment Washers
Camber Kit
44-76944-7718
44-76944-7718
9898 88-8926
0.30 / 0.300.30 / 0.30
Alignment Washers
Camber Kit
44-76944-7738 46-9812 98
980.20 / -0.20
Ford Explorer 2WD/4WD2003-2005
XAlignment Washers
Camber Kit
44-76944-7718
44-76944-7718
9898 88-8926
0.30 / 0.300.30 / 0.30
Alignment Washers
Camber Kit
44-76944-7738 46-9811 98
980.20 / -0.20
Ford Explorer 2WD/4WD2006-2010
X - Fac Adj. Fac Adj. - 88-8926 - / - Alignment Washers 44-769 Fac Adj. 98 0.20 / -
Ford Explorer 2WD/4WD2011-2014
X-
Axis CamMagna Cam
Fac Adj.41-21641-1592
Non Adj.-
5756
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Ford Explorer Sport Trac 4WD
2001-2005
XCamber KitCam Bolt
Camber Kit
44-76744-76844-766
44-76744-76844-766
899889
0.30 / 0.300.30 / 0.300.30 / 0.30
- Non Adj. Non Adj. - - / -
Ford F150 4WD1975-1979
X Bushing 44-2460 44-246044-9412 - 88-7090
0.80 / 0.80 1.50 - Non Adj. Non Adj. - - / -
Ford F150 4WD1980-1996
X BushingBushing
44-500044-5032
44-500044-5032
8384 88-501
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford F100/F150 2WD1982-1986
X Bushing 42-100 44-941242-4411 - 1.00 / 1.50
1.50 - Non Adj. Non Adj. - - / -
Ford F150 2WD1987-1991
X BushingBushing
42-95044-5094
42-95044-509444-9413
8685
1.00 / 1.001.00 / 1.00
1.50- Non Adj. Non Adj. - - / -
Ford F150 2WD1992-1996
X BushingBushing
42-95044-5094
42-95044-509444-9413
8685 88-2228
1.00 / 1.000.50 / 1.00
1.50- Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
FORD FORD
24A
PPLI
CAT
ION
GU
IDE
FORD FORD
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Ford F150/F250 1st design (cam only) 2WD/4WD
1997-1998
X Camber Kit 42-7776 42-7776 - 0.30 / 0.30 - Non Adj. Non Adj. - - / -
Ford F150/F250 2nd design (cam bolt) 2WD/4WD
1997-2003
X Cam Bolt 42-7787 42-7787 - 0.50 / 0.50 - Non Adj. Non Adj. - - / -
Ford F150/F250 (ProRYDE)1997-2004
X 64-3000F
Ford F150 Supercrew 4WD2001-2003
X Cam Bolt 42-7787 42-7787 - 0.50 / 0.50 - Non Adj. Non Adj. - - / -
Ford F150 2WD2004-2008
X Camber KitCamber Kit
44-78944-791
44-78944-791
100101
0.30 / 0.300.30 / 0.30 - Non Adj. Non Adj. - - / -
Ford F150 4WD2004-2008
X Camber KitCamber Kit
44-78944-791
44-78944-791
100101
0.30 / 0.300.30 / 0.30 - Non Adj. Non Adj. - - / -
Ford F150 (ProRYDE)2004-2008
X 74-3000F
Ford F150 2WD/4WD/SVT Raptor
2009-2014
X Camber KitCamber Kit
44-79044-791
44-79044-791
101101
0.30 / 0.300.30 / 0.30 - Non Adj. Non Adj. - - / -
Ford F150 (ProRYDE)2009-2013
X 74-3200F
Ford F250 (twin I- beam) 4WD
1980-1987
X BushingBushing
44-500044-5032
44-500044-5032
8384 88-501
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford/ 250 F350 w/ball joint suspension 4WD
1980-1997
X BushingBushing
44-500044-5032
44-500044-5032
8384 88-501
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford/ 250 4wd Twin I beam1980-1997
X BushingBushing
44-500044-5032
44-500044-5032
8384 88-501
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford F250/F350 2WD1981-1986
X Bushing 42-100 42-4412 - 88-2228 1.00 / 1.50 - Non Adj. Non Adj. - - / -
Ford Truck F250/F350 2WD
1987-1991
XBushingBushingBushing
42-95044-509442-970
42-95044-5094
868588
1.00 / 1.001.00 / 1.00
1.00 - Non Adj. Non Adj. - - / -
Ford F250/F350 2WD1992-1998
XBushingBushingBushing
42-95044-509442-970
42-95044-5094
868588 88-2228
1.00 / 1.001.00 / 1.00
1.00 - Non Adj. Non Adj. - - / -
Ford F250 LD 1st design (cam only) 4WD
1997-1998
X Camber Kit 42-7776 42-7776 - 0.30 / 0.30 - Non Adj. Non Adj. - - / -
Ford F250, F350, F450, F550 Super Duty (TIB) 2WD
1997-2014
XBushingBushingBushing
42-95044-509442-970
42-95044-5094
868588
1.00 / 1.001.00 / 1.00
1.00 - Non Adj. Non Adj. - - / -
Ford F250, F350, F450, F550 Super Duty (MOB) 2WD
1999-2004
X BushingBushing
44-500044-5032
44-500044-5032
8384
1.00 / 1.001.00 / - - Non Adj. Non Adj. - - / -
Ford F250, F350, F450, F550 Super Duty 4WD
1999-2004
X BushingBushing
44-500044-5032
44-500044-5032
8384 88-501
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford F250/F350 Super Duty (MOB) 2WD
2005-2014
X BushingBushing
44-600044-5036
44-600044-5036
8584
1.00 / 1.001.00 / - - Non Adj. Non Adj. - - / -
Ford F250/F350/F450/F550 SuperDuty (ProRYDE)
2005-2013
X 71-3500F
Ford F250 Super Duty 4WD
2005-2014
X BushingBushing
44-600044-5036
44-600044-5036
8584
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford F350 w/Dana 60 4WD1975-1991
X Camber Kit 44-910 Non Adj. 103 0.30 / - - Non Adj. Non Adj. - - / -
Ford F350 Super Duty 4WD
2005-2014
X BushingBushing
44-600044-5036
44-600044-5036
8584
1.00 / 0.501.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford F450/550 Super Duty 2WD/4WD
2005-2014
X BushingBushing
44-602044-5037
44-602044-5037
8785
1.00 / 0.501.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford Fairmont1978-1981
X -Wedge Kit
Fac Adj.41-310 Non Adj. -
63 88-4511- / -
0.30 - Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
25
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Ford Festiva1988-1993
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Ford Fiesta1978-1980
X-
Magna CamWedge Kit
Fac Adj.41-1473
41-300Non Adj.
-5662
- / -0.30 0.30
- Non Adj. Non Adj. - - / -
Ford Fiesta2011-2014
X Axis Cam-
41-21241-1473 Non Adj. 57
560.30 / -0.30 - Non Adj. Non Adj. - - / -
Ford Five Hundred FWD/AWD
2005-2007
X - Fac Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Ford Five Hundred FWD2005-2007
X - Fac Adj. Fac Adj. - - / - Camber Kit 46-135 Fac Adj. 71 0.75 / -
FORD Flex FWD/AWD2009-2014
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Ford Focus2000-2014
X Tower Plate 41-4611 Non Adj. 64 88-9416 0.60 / -Shim
Camber KitRear Arm
46-1700 SERIES46-170546-2188
Fac Adj.--
80
0.80 / -0.50 0.50
Ford Freestar2004-2007
X -Tower Plate
Fac Adj.41-4609 Fac Adj. -
64- / -
0.60 - Non Adj. Non Adj. - - / -
Ford Freestyle FWD2005-2007
X - Fac Adj. Non Adj. - - / - Camber Kit 46-135 Fac Adj. 71 0.75 / -
Ford Fusion2006-2012
X Ball Joint 41-236 41-236 60 0.90 / 0.90 - Fac Adj. Fac Adj. - - / -
Ford Fusion2013-2015
X Axis CamMagna Cam
41-21641-1592 Non Adj. 57
560.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Ford Granada1975-1980
X Cam Bolt 41-8243 Fac Adj. 61 0.30 / - - Non Adj. Non Adj. - - / -
Ford Granada1981-1982
X -Wedge Kit
Fac Adj.41-310 Non Adj. -
63 88-4511- / -
0.30 - Non Adj. Non Adj. - - / -
Ford Crown Victoria/LTD1983-1986
X - Fac Adj. Fac Adj. - 88-4511 - / - - Non Adj. Non Adj. - - / -
Ford Mustang1979-1993
X -Wedge Kit
Fac Adj.41-307 Non Adj. -
63- / -
0.03 - Non Adj. Non Adj. - - / -
Ford Mustang 5.01990-1993
X - Fac Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Ford Mustang 5.01994-1998
X - Fac Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Ford Mustang1994-2004
X -Wedge Kit
Fac Adj.41-307 Non Adj. -
63 88-9414- / -
0.30 - Non Adj. Non Adj. - - / -
Ford Mustang Cobra1999-2004
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Ford Mustang2005-2014
XCam BoltWedge KitAxis Cam
41-18041-31441-214
Fac Adj.41-325
-6357
0.03 / -0.30 / 0.50
0.30 - Non Adj. Non Adj. - - / -
Ford Probe1989-1997
X
-Magna CamWedge Kit
Performance Kit
Fac Adj.41-1462
41-30041-4470
Fac Adj.
-566258
- / -0.30 0.30
-
Magna CamWedge Kit
Performance Kit
41-1473
41-30041-4470
Fac Adj.566258
0.30 / -0.30
-
Ford Ranger 2WD1983-1988
X Bushing 42-100 44-9412 - 1.00 / 1.50 - Non Adj. Non Adj. - - / -
Ford Ranger 4WD1983-1989
X BushingBushing
44-60044-5035
44-60044-5094
-- 88-501
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Ford Ranger 2WD1989-1991
XBushingBushingBushing
42-95044-509442-970
42-95044-5094
868588
1.00 / 1.001.00 / 1.00
1.00 - Non Adj. Non Adj. - - / -
Ford Ranger 2WD/4WD1992-1997
XBushingBushingBushing
42-95044-509442-970
42-95044-5094
868588 88-2228
1.00 / 1.001.00 / 1.00
1.00 - Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
FORD FORD
26A
PPLI
CAT
ION
GU
IDE
GEOFORD
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Ford Ranger 2WD/4WD1998-2012
XCamber KitCam Bolt
Camber Kit
44-76744-76844-766
44-76744-76844-766
899889
0.30 / 0.300.30 / 0.300.30 / 0.30
- Non Adj. Non Adj. - - / -
Ford Taurus Sedan1986-1990
X -Tower Plate
Fac Adj.41-4603
Fac Adj.41-4603
-64 88-4520
88-9416
- / -0.50 / 0.60
Bushing-
46-13146-132
Fac Adj.46-13146-132
7070 88-1302
88-9200
0.50 / -0.40 / 0.50
0.40
Ford Taurus Wagon1986-1990
X -Tower Plate
Fac Adj.41-4603
Fac Adj.41-4603
-64 88-4520
88-9416
- / -0.50 / 0.50 Cam Bolt 46-136 Fac Adj.
46-133 71 88-130088-4511
0.80 / - 0.50
Ford Taurus Sedan1991-1995
X -Tower Plate
Fac Adj.41-4605
Fac Adj.41-4605
-64 88-4520
88-9416
- / -0.50 / 0.50
BushingCam Bolt
46-13146-132
Fac Adj.46-131
7070 88-1302
88-9200
0.50 / -0.40 / 0.50
Ford Taurus Wagon1991-1995
X -Tower Plate
Fac Adj.41-4605
Fac Adj.41-4605
-64 88-4520
88-9416
- / -0.50 / 0.50 Cam Bolt 46-136 Fac Adj.
46-133 71 88-130088-4511
0.80 / - 0.50
Ford Taurus Sedan1996-2006
X -Tower Plate
Fac Adj.41-4607 Fac Adj. -
64 88-7870C88-9416
- / -0.90
Cam BoltBushing
46-13446-131
46-13446-131
7170
0.40 / 0.500.40 / 0.40
Ford Taurus Wagon1996-2006
X -Tower Plate
Fac Adj.41-4607
Fac Adj.41-4607
-64 88-9416
- / -0.90 / 0.50 Cam Bolt 46-136 Fac Adj. 71 0.80 / -
Ford Taurus FWD2008-2010
X - Fac Adj. Fac Adj. - - / - Camber Kit 46-135 Fac Adj. 71 0.75 / -
Ford Taurus Sedan2011-2014
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Ford Taurus X AWD2008-2009
X - Non Adj. - -
Taurus X FWD2008-2009
X - Fac Adj. Fac Adj. - - / - Camber Kit 46-135 Fac Adj. 71 0.75 / -
Ford Tempo1984-1994
X Tower Plate 41-4601 41-4601 64 88-4602 0.50 / 0.50 Wedge KitBushing
46-20146-120 46-120 68
74 88-13030.40 / 0.40
0.50
Ford Tempo1985-1994
X Tower Plate 41-4601 41-4601 64 88-4602 0.50 / 0.50 Wedge Kit 46-201 Fac Adj. 68 88-9200 0.40 / -
Ford Tempo AWD1987-1992
X Tower Plate 41-4601 41-4601 64 88-4602 0.50 / 0.50 Wedge Kit 46-201 Fac Adj. 68 0.40 / -
Ford Thunderbird1980-1988
X -Wedge Kit
Fac Adj.41-310 Non Adj. -
63 88-4511- / -
0.30 - Non Adj. Non Adj. - - / -
Ford Thunderbird1989-1997
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Ford Thunderbird2002-2005
X -Cam Bolt
Fac Adj.41-8244
Fac Adj.41-8244
-61
- / -0.70 / 0.70 - Non Adj. Fac Adj. - - / -
Ford Transit Connect2010-2014
X Tower Plate 41-4611 Non Adj. 64 0.60 / - - Non Adj. Non Adj. - - / -
Ford Windstar1995-2003
X -Tower Plate
Fac Adj.41-4609 Fac Adj. -
64 88-452088-9416
- / -0.90
ShimShim
46-11001
46-2200146-11001
46-220017472 88-343
0.60 / 0.600.60 / 0.60
FREIGHTLINER
Freightliner Sprinter 2WD2002-2006
X ShimShim
42-443142-4434 Non Adj. 88
88- / -- - Non Adj. Non Adj. - - / -
Freightliner 25002007-2014
X Axis Cam 41-214 Non Adj. 57 0.30 / - - Non Adj. Non Adj. - - / -
Freightliner 35002007-2014
X Axis Cam 41-216 Non Adj. 57 0.30 / - - Non Adj. Non Adj. - - / -
GEO
Geo Metro1989-1997
XMagna Cam
Axis CamWedge Kit
41-1473
41-21241-312
Non Adj.565762
0.30 / -0.30 0.30
- Non Adj. Fac Adj. - - / -
Geo Prizm1989-1992
X Magna CamAxis Cam
41-14941-215 Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Geo Prizm1993-1997
X Magna CamAxis Cam
41-14941-215 Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
Shim
41-14941-21546-1300 SERIES1
Fac Adj.46-1300SERIES1
565774
0.30 / -0.30 / -
-
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
27
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Geo Spectrum 1989 X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.50 / 0.600.50 / 0.60
Geo Storm1990-1993
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30
Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30
Geo Tracker 2WD/4WD1989-1997
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30 - Non Adj. Non Adj. - - / -
GMC
GMC Acadia 2WD/4WD2007-2014
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
-Cam Bolt
Camber Kit
Fac Adj.41-825646-421
Fac Adj.-
9993 88-7996A
- / -0.30 1.00
GMC C Series P/U 2WD1979-1986
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
GMC C Series PU 2WD1988-1991
X Cam Bolt 41-82505 41-82505 99 0.60 / 0.60 - Non Adj. Non Adj. - - / -
GMC C Series P/U 2WD1992-1999
X -Cam Bolt
Fac Adj.41-82505
Fac Adj.41-82505
-99 88-7491
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
GMC Suburban 2WD1983-1986
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
GMC 2WD Topkick C4500 C550
2005-2009
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
GMC 4WD Topkick C4500 C5500
2005-2009
X BushingBushing
44-602044-5037
44-602044-5037
8785
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
GMC 2WD Canyon2004-2012
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
GMC 4WD Canyon2004-2012
X
-Quick Cam
Replacement Pins
Fac Adj.44-250744-2508
Fac Adj.44-250744-2508
-9595
- / -0.30 / 0.300.30 / 0.30
- Non Adj. Non Adj. - - / -
GMC Envoy 2WD/4WD 2002 X -Cam Bolt
Fac Adj.41-8246
Fac Adj.41-8246
-61
- / -0.60 / - - Non Adj. Non Adj. - - / -
GMC 2WD/4WD Envoy2003-2009
X Camber-CasterTool 88-8929 88-8929 - 88-8929 - / - - Non Adj. Non Adj. - - / -
GMC G Series Van 2WD1979-1995
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
GMC Jimmy (Full Size) 4WD
1970-1991
X Bushing 44-2460 44-2460 - 0.80 / 0.80 - Non Adj. Non Adj. - - / -
GMC Jimmy (full size) 2WD
1974-1978
X -Shim
Fac Adj.cc
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
GMC K Series P/U 4WD1983-1986
X Bushing 44-2460 44-2460 - 88-7090 0.80 / - - Non Adj. Non Adj. - - / -
GMC K Series P/U 4WD1988-2000
X Cam Bolt 41-82505 41-82505 99 88-7491 0.60 / 0.60 - Non Adj. Non Adj. - - / -
GMC V Series P/U 4WD1988-1991
X Bushing 44-2460 44-2460 - 88-7090 0.80 / 0.80 - Non Adj. Non Adj. - - / -
GMC K Series P/U (rear drum brakes) 4WD
1992-1999
X -Cam Bolt
Fac Adj.41-82505
Fac Adj.41-82505
-99 88-7491
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
GMC R Series 2WD1987-1991
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
GMC S15 P/U (downsize) 4WD 1982 X -
Cam BoltFac Adj.41-8247
Fac Adj.41-8247
-61
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
GMC S15 P/U/Sonoma (downsize) 4WD
1983-1990
X -Cam Bolt
Fac Adj.41-8246
Fac Adj.41-8246
-61
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
GMC S15/T15 Jimmy, Syclone, Typhoon 4WD
1983-1993
X -Cam Bolt
Fac Adj.41-8246
Fac Adj.41-8246
-61
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
GMC S15 Jimmy, Typhoon 2WD
1983-1993
X -Shim
Fac Adj.cc
Fac Adj.cc
--
- / -- / - - Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
GMCGEO
28A
PPLI
CAT
ION
GU
IDE
GMC HONDA
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
GMC Safari 2WD1985-2005
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
GMC Safari 4WD1990-2005
X -Cam Bolt
Fac Adj.41-82505
Fac Adj.41-82505
-99 88-7491
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
GMC Savana 2WD1996-2002
X -Cam Bolt
Fac Adj.41-82505
Fac Adj.41-82505
-99 88-7491
- / -0.60 / - - Non Adj. Non Adj. - - / -
GMC 2WD Savana Van2003-2014
X
-Quick Cam
Replacement Pins
Camber KitBushing
Fac Adj.44-250644-250841-825144-25095
Fac Adj.44-250644-250841-825144-25095
-95959995
- / -0.30 / 0.300.30 / 0.300.50 / 0.500.80 / 0.80
- Non Adj. Non Adj. - - / -
GMC Sierra HD 1500/2500/3500 2WD/4WD
2007-2010
X
-Bushing
Replacement Pins
Quick CamCamber KitBall Joint
Fac Adj.44-251044-250844-250641-825144-2498
Fac Adj.44-251044-250844-250641-825144-2498
-9695959992
88-7950A
- / -0.80 / 0.800.30 / 0.300.30 / 0.300.50 / 0.500.90 / 0.90
- Non Adj. Non Adj. - - / -
GMC Sierra 1500 2WD/4WD
1999-2006
X
-Bushing
Quick CamCamber Kit
Replacement Pins
Ball JointControl Arm
W/BJ
Fac Adj.44-25095
44-250641-825144-250844-249944-2725
Fac Adj.44-25095
44-250641-825144-250844-249944-2725
-959599959296
88-7950A
- / -0.80 / 0.800.30 / 0.300.50 / 0.500.30 / 0.300.90 / 0.900.60 / 0.60
- Non Adj. Non Adj. - - / -
GMC Sierra 1500 2WD/4WD
2007-2014
X
-Bushing
Quick CamCamber Kit
Replacement Pins
Ball Joint
Fac Adj.44-25095
44-250641-825144-2508
44-2726L
Fac Adj.44-25095
44-250641-825144-2508
44-2726L
-9595999596
88-7950A
- / -0.80 / 0.800.30 / 0.300.50 / 0.500.30 / 0.300.60 / 0.60
- Non Adj. Non Adj. - - / -
GMC Sierra HD 1500/2500/3500 2WD/4WD
1999-2010
X
-BushingCam BoltCam Bolt
Replacement Pins
Ball JointControl Arm
W/BJ
Fac Adj.44-251041-825144-250644-250844-249844-2730
Fac Adj.44-251041-825144-250844-250644-249844-2730
-969995959293
- / -0.08 / -0.60 / -0.30 / -0.30 / -
0.90 / 0.900.60 / 0.60
GMC Sierra HD 2500/3500 2WD/4WD
2011-2014
X - Fac Adj. Fac Adj. - - / -
GMC Terrain2010-2014
X Magna CamAxis Cam
41-1582
41-2145657
0.30 0.30 - 44-775 44-775 100 0.30 / 0.30
GMC Suburban 4WD1987-1991
X Bushing 44-2460 44-2460 - 88-7090 0.80 / 0.80 - Non Adj. Non Adj. - - / -
GMC 4 WD Truck Yukon/Denali (rear drum brake)
1992-2000
X -Cam Bolt
Fac Adj.41-82505
Fac Adj.41-82505
-99 88-7491
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
GMC Yukon/Denali 2WD/4WD
2000-2014
X
-Bushing
Replacement Pins
Camber KitQuick Cam
Fac Adj.44-25095
44-250841-825144-2506
Fac Adj.44-25095
44-250841-825144-2506
-95959995
88-7950A
- / -0.80 / 0.800.30 / 0.300.50 / 0.500.30 / 0.30
- Non Adj. Non Adj. - - / -
GMC 2WD Yukon XL2000-2014
X
-Bushing
Camber KitQuick Cam
Replacement Pins
Fac Adj.44-25095
41-825144-250644-2508
Fac Adj.44-25095
41-825144-250644-2508
-95999595
- / -0.80 / 0.800.50 / 0.500.30 / 0.300.30 / 0.30
- Non Adj. Non Adj. - - / -
GMC Yukon XL 1500 2WD2000-2014
X
-Bushing
Camber KitQuick Cam
Replacement Pins
Fac Adj.44-25095
41-825144-250644-2508
Fac Adj.44-25095
41-825144-250644-2508
-95999595
88-7950A
- / -0.80 / 0.800.50 / 0.500.30 / 0.300.30 / 0.30
- Non Adj. Non Adj. - - / -
GMC Yukon XL 2500HD 2WD/4WD
2000-2013
X
-Bushing
Replacement Pins
Camber KitQuick CamBall Joint
Fac Adj.44-251044-250841-825144-250644-2498
Fac Adj.44-251044-250841-825144-250644-2498
-9695999592
88-7950A
- / -0.80 / 0.800.30 / 0.300.50 / 0.500.30 / 0.300.90 / 0.90
- Non Adj. Non Adj. - - / -
HONDA
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
29
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Honda Accord1986-1989
X Camber Stud 41-520 Fac Adj. - 0.50 / - Shim 46-2160 Fac Adj. 72 0.50 / -
Honda Accord1990-1997
XBall Joint
Performance KitPerformance Kit
41-53041-560041-560
Fac Adj.41-530
60-- 88-7800A
0.90 / -- / 0.90
-
ShimPerformance Kit
46-216041-5600 Fac Adj. 72
-0.20 / -
-
Honda Accord1998-2002
XBall Joint
Performance KitPerformance Kit
41-53241-569041-561
Fac Adj.41-532
60-- 88-7800A
0.90 / -- / 0.90
-
Rear ArmPerformance Kit
46-219041-5690 Fac Adj. 81
-0.70 / -
-
Honda Accord2003-2007
X Ball JointPerformance Kit
41-53241-561
Fac Adj.41-532
60- 88-7890A
0.90 / -- / -
Rear ArmRear Arm
46-219546-2192 46-2195 81
810.70 / 0.70
0.50
Honda Accord2008-2012
X Ball Joint 41-532 Fac Adj. 60 88-7890A 0.90 / - Rear Arm 46-2184 Fac Adj. 79 0.30 / -
Honda Accord2013-2014
X - Fac Adj. Fac Adj. - 88-7890A - / - Rear Arm 46-2184 Fac Adj. 79 0.30 / -
Honda Accord Crosstour2010-2011
X Ball Joint 41-532 41-532 60 0.90 / 0.90 Rear Arm 46-2184 Fac Adj. 79 0.30 / -
Honda Civic1980-1990
X - Non Adj. Non Adj. - - / - ShimShim
46-12001
46-2300146-12001
46-230017472 88-343
0.60 / 0.600.60 / 0.60
Honda Civic Wagon1984-1987
X - Non Adj. Non Adj. - - / - ShimShim
46-12001
46-2300146-12001
46-230017472 88-343
0.60 / 0.600.60 / 0.60
Honda CRX1984-1987
X - Non Adj. Non Adj. - - / - ShimShim
46-12001
46-2300146-12001
46-230017472 88-343
0.60 / 0.600.60 / 0.60
Honda Civic1992-2000
X Ball Joint 41-532 41-532 60 88-7800A 0.90 / 0.90 Shim 46-2160 Fac Adj. 72 0.20 / -
Honda Civic2001-2002
X Cam BoltAxis Cam
41-18041-214 Non Adj. -
570.30 / -0.30 Rear Arm 46-2180 Fac Adj. 78 0.50 / -
Honda Civic SI2002-2005
X Magna CamAxis Cam
41-1592
41-216Non Adj. 56
570.30 / -0.30 Rear Arm 46-2180 Fac Adj. 78 0.50 / -
Honda Civic Hybrid2003-2005
X Axis Cam 41-214 Non Adj. 57 0.30 / - Rear Arm 46-2180 Fac Adj. 78 0.50 / -
Honda Civic2003-2005
X Magna CamAxis Cam
41-1592
41-216Non Adj. 56
570.30 / -0.30 Rear Arm 46-2180 Fac Adj. 78 0.50 / -
Honda Civic / Civic Hybrid2006-2014
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30 Rear Arm 46-2187 Fac Adj. 80 0.50 / -
Honda Civic / Civic Hybrid / SI
2012-2014
X Axis CamMagna Cam
41-21641-1602 Non Adj. 57
560.30 / -0.30 Rear Arm 46-2187 Fac Adj. 80 0.50 / -
Honda Civic del Sol1993-1997
X Ball JointPerformance Kit
41-53241-561 41-532 60
- 88-7800A0.90 / 0.90
- Shim 46-2160 Fac Adj. 72 0.20 / -
Honda CR-V 4x2 and 4x41997-2001
X Ball JointPerformance Kit
41-53241-561 41-532 60
- 88-7800A0.90 / 0.90
- Shim 46-2160 Fac Adj. 72 0.20 / -
Honda CR-V2002-2006
X Magna CamAxis Cam
41-1592
41-216Non Adj. 56
570.30 / -0.30 Rear Arm 46-2185 Fac Adj. 79 0.50 / -
Honda CR-V 2WD/4WD2007-2015
X Camber KitAxis Cam
41-1592
41-216Non Adj. 56
57- / -- Rear Arm 46-2186 Fac Adj. 80 - / -
Honda CR-Z2011-2014
X Axis Cam 41-214 Non Adj. 57 0.30 / - - Non Adj. Non Adj. - - / -
Honda CRX1988-1991
X Ball JointPerformance Kit
41-53241-561 41-532 60
- 88-7800A0.90 / 0.90
- Shim 46-2160 Fac Adj. 72 0.20 / -
Honda Element2003-2011
X Magna CamAxis Cam
41-1592
41-216Non Adj. 56
570.30 / -0.30 Rear Arm 46-2185 Non Adj. 79 0.50 / -
Honda Fit2007-2014
X Axis Cam 41-214 Non Adj. 57 0.30 / - Shim 46-15001 46-15001 74 0.60 / 0.60
Honda Insight2000-2006
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
- Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
HONDA HONDA
30A
PPLI
CAT
ION
GU
IDE
HONDA HYUNDAI
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Honda Insight2010-2014
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30 - Non Adj. Non Adj. - - / -
Honda Odyssey1995-1998
X Ball JointPerformance Kit
41-53041-560 41-530 60
- 88-7800A0.90 / 0.90
- - Non Adj. Fac Adj. - - / -
Honda Odyssey1999-2004
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
Rear Arm 46-2192 Fac Adj. 81 0.50 / -
Honda Odyssey2005-2015
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
Rear Arm 46-2191 Fac Adj. 81 - / -
Honda Passport 2WD/4WD1994-2002
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Honda Pilot2003-2008
X Axis CamMagna Cam
41-21641-1592 Non Adj. 57
560.30 / -0.30 Rear Arm 46-2192 Fac Adj. 81 0.50 / -
Honda Pilot2009-2015
X Axis Cam 41-217 Non Adj. 57 0.30 / - Rear Arm 46-2196 Fac Adj. 82 - / -
Honda Prelude1983-1987
X - Fac Adj. Fac Adj. - - / - - Non Adj. Fac Adj. - - / -
Honda Prelude 2 W/S1988-1991
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Honda Prelude 4 W/S1988-1991
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Honda Prelude 2 W/S1992-1996
X Ball JointPerformance Kit
41-53041-560
Fac Adj.41-530
60-
0.90 / 0.90- / - Ball Joint 41-530 Fac Adj. 60 0.90 / -
Honda Prelude 4 W/S1992-1995
X Ball Joint 41-530 Fac Adj.41-530 60 88-7800A
0.90 / - 0.90 Ball Joint 41-530 Fac Adj. 60 88-7800A 0.90 / -
Honda Prelude except SH1997-2001
X Ball JointPerformance Kit
41-53241-561
Fac Adj.41-532
60- 88-7800A
0.90 / -- / 0.90 Ball Joint 41-530 Fac Adj. 60 88-7800A 0.90 / -
Honda Prelude SH1997-2001
X Ball Joint 41-530 Fac Adj.41-530 60 88-7800A
0.90 / - 0.90 Ball Joint 41-530 Fac Adj. 60 88-7800A 0.90 / -
Honda 4WD RidgeLine2006-2014
X Axis Cam 41-217 Non Adj. 57 0.30 / - - Non Adj. Fac Adj. - - / -
Honda S2000/SH2000-2009
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
HUMMER
Hummer H12002-2006
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Hummer H22003-2009
X
-Bushing
Camber KitReplacement
PinsQuick CamBall Joint
Fac Adj.44-251041-825144-250844-250644-2498
Fac Adj.44-251041-825144-2498
-9699959592
88-7950A
- / -0.80 / 0.800.50 / 0.500.30 / 0.90
0.30 0.90
- Non Adj. Non Adj. - - / -
Hummer H2 (ProRYDE)2003-2009
X 64-1200G
Hummer H32006-2010
X -Quick Cam
Fac Adj.44-2507
Fac Adj.44-2507
-95
- / -0.30 / 0.30 - Non Adj. Non Adj. - - / -
HYUNDAI
Hyundai Accent1995-2005
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Hyundai Accent2006-2014
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 Shim 46-15001 46-15001 74 0.60 / 0.60
Hyundai Elantra1992-1996
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30 - Non Adj. Non Adj. - - / -
Hyundai Elantra1997-2006
XMagna CamMagna Cam
Axis Cam
41-1462
41-1473
41-212Non Adj.
565657
0.30 / -0.30 0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
31
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Hyundai Elantraw/multi-Linke rear susp
2007-2010
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30 Rear Arm 46-2189 46-2189 80 - / -
Hyundai Elantra Turing w/multi-Linke rear susp
2011-2012
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30 Rear Arm 46-2189 46-2189 80 - / -
Hyundai Elantraw W/Beam Rear Susp
2011-2012
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30
Hyundai Elantraw after 7-1-2011 W/Beam Type Rear Susp
2011-2013
X
Axis CamMagna Cam
Axis CamMagna Cam
41-21641-1592
41-21441-1582
Non Adj.
57565756
0.30 / -0.30 0.30 0.30
Hyundai Elantraw GT / multi-Link rear susp 2013 X Axis Cam
Magna Cam41-21441-1582 Non Adj. 57
560.30 / -0.30 Rear Arm 46-2189 46-2189 80 - / -
Hyundai Elantraw Coupe W/Beam Rear Susp 2013 X Axis Cam
Magna Cam41-21441-1582 Non Adj. 57
560.30 / -0.30
Hyundai Excel1986-1994
X Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30 - Non Adj. Non Adj. - - / -
Hyundai Genesis Sedan 2wd / Awd
2009-2014
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Hyundia Genesis Coupe2010-2013
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Hyundai Santa Fe AWD2001-2014
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Hyundai Scoupe1991-1995
X Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Hyundai Sonata1989-1994
X Magna CamWedge Kit
41-1473
41-305Non Adj. 56
620.30 / -0.30 - Non Adj. Non Adj. - - / -
Hyundai Sonata1995-1998
X Magna CamWedge Kit
41-1473
41-305Non Adj. 56
620.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Hyundai Sonata1999-2010
X Ball Joint 41-550 41-550 60 88-7800A 0.90 / 0.90 - Non Adj. Fac Adj. - - / -
Hyundai Sonata (built after 5-2011)
2011-2014
X Axis CamMagna Cam
41-21641-1602 Non Adj. 57
560.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Hyundai Sonata (built before 5-2011) 2011 X Axis Cam
Magna Cam41-21441-1582 Non Adj. 57
560.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Hyundai Tiburon1997-2001
X Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Hyundai Tiburon2003-2008
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Hyundai Tuscon 4x4/4x22005-2014
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30
Axis CamMagna Cam
41-21441-1582 Fac Adj. 57
560.30 / -0.30
Hyundai2012-2014
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30 Shim
46-1500 SERIES1
46-1500SERIES1 74 - / -
Hyundai XG300/XG3502001-2005
X Ball Joint 41-550 41-550 60 0.90 / 0.90 - Non Adj. Fac Adj. - - / -
INFINITI
Infiniti FX35/FX452004-2011
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Infiniti G201991-1996
X - Non Adj. Non Adj. - - / - Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Infiniti G201999-2002
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Infiniti G352006-2008
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj.46-141 - - / -
0.30
Infiniti G372008-2014
X - Non Adj. Non Adj. - - / - - Fac Adj. 46-141 - - / 0.30
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
HYUNDAI INFINITY
32A
PPLI
CAT
ION
GU
IDE
INFINITI JAGUAR
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Infiniti I301996-2001
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Infiniti I352002-2004
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Infiniti J301993-1996
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Infiniti M301990-1992
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Infiniti M452003-2004
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Infiniti Q451990-2006
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Infiniti QX41997-2003
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Infiniti QX56 (ProRYDE)2004-2008
X 74-4000N
ISUZU
Isuzu Amigo 2WD/4WD1989-2000
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Isuzu Ascender 2WD/4WD2003-2008
X Camber-CasterTool 88-8929 88-8929 - - / - - Non Adj. Non Adj. - - / -
Isuzu Axiom 2WD2002-2004
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Isuzu Axiom 4WD2002-2004
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Isuzu Hombre 2WD1996-2000
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Isuzu Hombre 4WD1996-2000
X -Cam Bolt
Fac Adj.41-8246
Fac Adj.41-8246
-61
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
Isuzu I35/I28 4WD 2006 X -Quick Cam
Fac Adj.44-2507
Fac Adj.44-2507
-95
- / -0.30 / 0.30 - Non Adj. Non Adj. - - / -
Isuzu I-Mark FWD1985-1989
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Isuzu Impulse1990-1992
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30
Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30
Isuzu Oasis1996-1999
X Ball Joint 41-530 41-530 60 0.90 / 0.90 Shim 46-2160 Fac Adj. 72 0.20 / -
Isuzu Pickup 2WD/4WD1981-1995
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Isuzu Rodeo 2WD/4WD1991-2004
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Isuzu Stylus1991-1993
X Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30
Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30
Isuzu Trooper II 4WD1988-2002
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Isuzu Trooper 4WD1992-2002
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Isuzu VehiCross1999-2001
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
JAGUAR
Jaguar S Type2000-2008
X -Cam Bolt
Fac Adj.41-8244
Fac Adj.41-8244
-61
- / -0.70 / - - Non Adj. Fac Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
33
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Jaguar X Type2002-2008
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Jaguar XJ Sedans1995-1997
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Fac Adj. Fac Adj. - - / -
Jaguar XJ6/XJ Sedan1983-1994
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Fac Adj. Non Adj. - - / -
Jaguar XJR Sedan1998-2002
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Jaguar XJS1983-1996
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Fac Adj. Non Adj. - - / -
Jaguar XK8/XKR1997-2014
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
JEEP
Jeep Cherokee (full size)1974-1983
X Bushing 44-2460 44-2460 - 88-7090 0.80 / 0.80 - Non Adj. Non Adj. - - / -
Jeep Cherokee, Wagoneer (downsize)
1984-1989
X Ball JointBushing
44-249044-2480
Fac Adj.44-2490
97- 88-7900A
0.90 / -0.80 / 0.90 - Non Adj. Non Adj. - - / -
Jeep Cherokee, Wagoneer (downsize)
1990-2001
X Ball Joint 44-2490 Fac Adj.44-2490 97 88-7900A
0.90 / - 0.90 - Non Adj. Non Adj. - - / -
Jeep CJ Models1977-1986
X Bushing 44-2460 44-2460 - 88-7090 0.80 / 0.80 - Non Adj. Non Adj. - - / -
Jeep Comanche1986-1989
X Ball JointBushing
44-249044-2480
Fac Adj.44-2490
97- 88-7900A
0.90 / -0.80 / 0.90 - Non Adj. Non Adj. - - / -
Jeep Comanche1990-1992
X Ball Joint 44-2490 Fac Adj.44-2490 97 88-7900A
0.90 / - 0.90 - Non Adj. Non Adj. - - / -
Jeep Commander2006-2010
X -Ball Joint
Fac Adj.44-2493 44-2493 -
91- / 0.900.90 - Non Adj. Non Adj. - - / -
Jeep Compass2007-2014
X Axis CamMagna Cam
41-21441-1582 Fac Adj. 57
560.30 / -0.30
-Rear Arm
Non Adj.46-2178 Non Adj. -
94- / -
0.60
Jeep Grand Cherokee1993-1998
X Ball Joint 44-2490 41-825644-2490 97 88-7900A
0.90 / 0.30 0.90 - Non Adj. Non Adj. - - / -
Jeep Grand Chreokee1999-2004
X Ball Joint 44-2491 Fac Adj.44-2491 97 88-7900A
0.90 / - 0.90 - Non Adj. Non Adj. - - / -
Jeep Grand Cherokee2005-2010
X -Ball Joint
Fac Adj.44-2493 44-2493 -
91- / 0.900.90 - Non Adj. Non Adj. - - / -
Jeep Grand Cherokee2011-2014
X-
Ball JointCamber Kit
Fac Adj.44-249544-794
44-249544-795
-91101
- / 0.900.90 / -
-- Non Adj. Non Adj. - - / -
Jeep J10/J20 Pickup1977-1988
X Bushing 44-2460 44-2460 - 88-7090 0.80 / 0.80 - Non Adj. Non Adj. - - / -
Jeep Liberty 2WD/4WD2002-2013
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Jeep Patriot2007-2014
X Axis CamMagna Cam
41-21441-1582 Fac Adj. 57
560.30 / -0.30
-Rear Arm
Non Adj.46-2178 46-2174 -
94- / -
0.60
Jeep Scrambler1982-1985
X Bushing 44-2460 44-2460 - 88-7090 0.80 / 0.80 - Non Adj. Non Adj. - - / -
Jeep Wrangler1987-1988
X Ball JointBushing
44-249044-2480 44-2490 97
- 88-7900A0.90 / 0.90
0.80 - Non Adj. Non Adj. - - / -
Jeep Wrangler TJ1997-2006
X Ball JointCam Bolt
44-249041-8255
41-825644-2490
9799 88-7900A
0.90 / 0.300.60 / 0.90 Cam Bolt 41-8255 Non Adj. 99 0.60 / -
Jeep Wrangler JK2007-2014
X Ball Joint 44-2490 41-8257 97 0.90 / 0.30 - Non Adj. Non Adj. - - / -
KIA
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
JAGUAR KIA
34A
PPLI
CAT
ION
GU
IDE
KIA LEXUS
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Kia Amanti2004-2009
X Ball Joint 41-550 Fac Adj. 60 0.90 / - - Non Adj. Fac Adj. - - / -
Kia Forte2010-2014
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30
-Shim
46-24001
46-1300 SERIES1
46-24001
46-1300SERIES1
7274
0.60 / 0.600.60 / 0.60
Kia Optima2001-2006
X Ball Joint 41-550 Non Adj. 60 88-7800A 0.90 / - - Non Adj. Non Adj. - - / -
Kia Optima2007-2008
X Ball Joint 41-550 60 88-7800A 0.90 Rear Arm 46-2189 46-2189 80 - / -
Kia Optima2009-2010
X Ball Joint 41-550 60 88-7800A 0.90 - Non Adj. Non Adj. - - / -
Kia Rio2001-2011
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
ShimShim
46-1300 SERIES1
46-24001
46-1300SERIES1
46-24001
7472
0.60 / 0.600.60 / 0.60
Kia Rio2012-2014
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Kia Rondo2007-2010
X Axis CamMagna Cam
41-21441-1572
5756
0.30 0.30 Rear Arm 46-2189 46-2189 80 - / -
Kia Sedona2002-2012
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
- Non Adj. Non Adj. - - / -
Kia Sephia1994-2001
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Fac Adj.
-5657
- / -0.30 0.30
- Non Adj. Fac Adj. - - / -
Kia Sorenta 2WD/4WD2003-2014
X -Axis Cam
Fac Adj.41-214 Fac Adj. -
57- / -
0.30 - Non Adj. Non Adj. - - / -
Kia Soul2010-2014
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30
-Shim
Non Adj.46-1500 SERIES1
Non Adj.46-1500SERIES1
-74
- / -0.60 / 0.60
Kia Spectra2000-2009
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Fac Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Kia Sportage 2WD/4WD2005-2014
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30
Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30
LADA
LADA Canada All 4WDRWD
1983-1993
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
LADA Canada All FWD Models
1983-1993
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
LAND ROVER
Rover Defender/Discovery1993-2004
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Land Rover Freelander2002-2006
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1582
41-214Fac Adj. 56
570.30 / -0.30
Range Rover1987-2002
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Range Rover2003-2014
X - Fac Adj. Fac Adj. - - / - - Non Adj. Fac Adj. - - / -
LEXUS
Lexus ES 2501990-1991
X Magna CamAxis Cam
41-1602
41-216Fac Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1602
41-216Fac Adj. 56
570.30 / -0.30
Lexus ES 3001992-2003
X Magna CamAxis Cam
41-15141-217 Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-14941-215 Fac Adj. 56
570.30 / -0.30
Lexus ES 3302004-2006
X Magna CamAxis Cam
41-15141-217 Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-14941-215 Fac Adj. 56
570.30 / -0.30
Lexus ES 3502007-2012
X Magna CamAxis Cam
41-15141-217 Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-14941-215 Fac Adj. 56
570.30 / -0.30
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
35
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Lexus ES 3502013-2014
X Magna CamAxis Cam
41-15141-217 Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-15141-217 Fac Adj. 56
570.30 / -0.30
Lexus GS3001993-1997
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Lexus GS300/GS4001998-2006
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Lexus GS300/3502006-2011
X - Fac Adj. Non Adj. - - / - Rear Arm 46-2226 Fac Adj. 82 0.50 / -
Lexus GS 4302001-2007
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Lexus GX2010-2014
X -Cam Bolt
Fac Adj.44-828
Fac Adj.44-828
-103
- / -- / - - Non Adj. Non Adj. - - / -
Lexus GX2003-2009
X -Cam Bolt
Fac Adj.44-827
Fac Adj.44-827
-103
- / -- / - - Non Adj. Non Adj. - - / -
Lexus IS250/3502006-2014
X - Fac Adj. Non Adj. - - / - Rear Arm 46-2226 Fac Adj. 82 0.50 / -
Lexus IS 3002001-2005
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Lexus LS4001995-2000
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Lexus LS 4302001-2006
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Lexus LX4501996-1997
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Lexus LX4701998-2007
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Lexus RX 350 2WD/4WD2007-2014
X-
Magna CamAxis Cam
Fac Adj.41-15141-217
Non Adj.-
5657
- / -0.30 0.30
Magna CamAxis Cam
41-14941-215 Fac Adj. 56
570.30 / -0.30
Lexus SC 300/SC 4001992-2000
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Lexus SC 4302002-2010
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
LINCOLN
Lincoln Aviator2003-2005
XAlignment Washers
Camber Kit
44-76944-7718
44-76944-7718
9898 88-8926
0.30 / 0.300.30 / -
Alignment Washers
Camber Kit
44-76944-7738 46-9811 98
980.30 / -0.30
Lincoln Blackwood P/U 2WD/4WD
2002-2003
X Cam Bolt 42-7787 42-7787 - 0.30 / 0.30 - Non Adj. Non Adj. - - / -
Lincoln Continental1982-1987
X -Wedge Kit
Fac Adj.41-310 Non Adj. -
63 88-4511- / -
0.30 - Non Adj. Non Adj. - - / -
Lincoln Continental1988-1994
X - Fac Adj. Fac Adj. - 88-4520 - / - BushingCamber Kit
46-13146-132
Fac Adj.46-13146-132
7070 88-1302
0.50 / -0.40 / 0.50
0.40
Lincoln Continental1995-2002
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - 88-9066 - / -
Lincoln LS2000-2006
X -Cam Bolt
Fac Adj.41-8244
Fac Adj.41-8244
-61
- / -0.70 / - - Non Adj. Fac Adj. - - / -
Lincoln Mark LT 2WD2006-2008
X Camber KitCamber Kit
44-78944-791
44-78944-791
100101
0.30 / 0.300.30 / 0.30 - Non Adj. Non Adj. - - / -
Lincoln Mark LT 4WD2006-2008
X Camber KitCamber Kit
44-78944-791
44-78944-791
100101
0.30 / 0.300.30 / 0.30 - Non Adj. Non Adj. - - / -
Lincoln Mark LT (ProRYDE)
2006-2008
X 74-3000F
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
LEXUS LINCOLN
36A
PPLI
CAT
ION
GU
IDE
LINCOLN MAZDA
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Lincoln Mark VII1984-1992
X -Wedge Kit
Fac Adj.41-310 Non Adj. -
63 88-4511- / -
0.30 - Non Adj. Non Adj. - - / -
Lincoln Mark VIII1993-1998
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Lincoln MKX2007-2014
X Axis CamMagna Cam
41-21641-1592 Non Adj. 57
560.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Lincoln Zephyr MKZ2006-2012
X Ball Joint 41-236 41-236 60 0.90 / 0.90 - Non Adj. Fac Adj. - - / -
Lincoln Zephyr MKZ2013-2014
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Lincoln Navigator 1st design 2WD/4WD 1998 X Camber Kit 42-7776 42-7776 - 0.30 / 0.30 - Non Adj. Non Adj. - - / -
Lincoln Navigator 2nd design 2WD/4WD
1998-2002
X Cam Bolt 42-7787 42-7787 - 0.30 / 0.50 - Non Adj. Non Adj. - - / -
Lincoln Navigator (ProRYDE)
1998-2002
X 64-3000F
Lincoln Navigator 2WD/4WD
2003-2006
X Camber Kit 44-7868 44-7868 100 0.30 / 0.30 Cam Bolt 44-784 46-9813 100 0.50 / 0.50
Lincoln Navigator (ProRYDE)
2003-2008
X 74-3000F
Lincoln Navigator 2WD/4WD
2007-2014
X Camber KitCamber Kit
44-79044-791
44-79044-791
101101
0.30 / 0.300.30 / 0.30 - Non Adj. Non Adj. - - / -
Lincoln Town Car1981-1990
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Lincoln Town Car1991-2002
X - Fac Adj. Fac Adj. - 88-9412 - / - - Non Adj. Non Adj. - - / -
Lincoln Town Car2003-2011
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Lincoln Versailles1977-1980
X Cam Bolt 41-8243 Fac Adj. 61 0.30 / - - Non Adj. Non Adj. - - / -
MAZDA
Mazda 32004-2014
X - Non Adj. Non Adj. - - / - Rear Arm 46-2188 Fac Adj. 80 0.30 / -
Mazda 323/Protege 2WD/4WD
1986-1995
X-
Magna CamAxis Cam
Fac Adj.41-1462
41-212Non Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Mazda 52006-2014
X - Non Adj. Non Adj. - - / - Rear Arm 46-2188 Non Adj. 80 0.50 / -
Mazda 62003-2014
X Ball Joint 41-236 41-236 60 0.90 / 0.90 - Non Adj. Non Adj. - - / -
Mazda 6261979-1982
X-
Magna CamAxis Cam
Fac Adj.41-1462
41-212Fac Adj.
-5657
- / -0.30 0.30
- Non Adj. Non Adj. - - / -
Mazda 6261983-2002
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Fac Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Mazda 626 4WD1988-1989
X-
Magna CamAxis Cam
Fac Adj.41-1462
41-212Fac Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Mazda 9291988-1991
X - Fac Adj. Fac Adj. - - / - - Non Adj. Fac Adj. - - / -
Mazda 9291992-1995
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Mazda B Series P/U 2WD1972-1993
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
37
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Mazda B Series P/U 4WD1972-1993
X -Shim
Fac Adj.45-350
Fac Adj.45-350
--
- / -- / - - Non Adj. Non Adj. - - / -
Mazda B Series P/U 2WD/4WD
1994-1997
XBushingBushingBushing
42-95044-509442-970
42-95044-5094
868588
1.00 / 1.001.00 / 1.00
1.00 - Non Adj. Non Adj. - - / -
Mazda B Series P/U 2WD/4WD
1998-2009
X Camber KitCamber Kit
44-76744-768
44-76744-768
8998
0.30 / 0.300.30 / 0.30 - Non Adj. Non Adj. - - / -
Mazda CX-72007-2011
X -Axis Cam
Fac Adj.41-214 Fac Adj. -
57- / -
0.30 - Non Adj. Fac Adj. - - / -
Mazda CX-92007-2014
X Axis CamMagna Cam
41-21441-1572
5756
0.30 0.30 - Fac Adj. Fac Adj. - - / -
Mazda GLC1981-1985
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Mazda Millenia1995-2002
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Mazda MPV 2WD1989-2006
X
-Magna CamMagna Cam
Axis Cam
Fac Adj.41-1462
41-1473
41-212
Fac Adj.
-565657
- / -0.30 0.30 0.30
- Non Adj. Non Adj. - - / -
Mazda MPV 4WD1989-2006
X-
Magna CamAxis Cam
Fac Adj.41-1462
41-212
Fac Adj.41-1473
-5657
- / -0.30 / 0.30
0.30 - Non Adj. Non Adj. - - / -
Mazda MPV2000-2006
X
-Magna CamMagna Cam
Axis Cam
Fac Adj.41-1462
41-1473
41-212
Fac Adj.
-565657
- / -0.30 0.30 0.30
- Non Adj. Non Adj. - - / -
Mazda MX-31992-1996
X-
Magna CamAxis Cam
Fac Adj.41-1462
41-212Fac Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Mazda MX-5 Miata2006-2014
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Mazda MX-61988-1997
X-
Magna CamAxis Cam
Fac Adj.41-1462
41-212Non Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Mazda Navajo 2WD1991-1994
XBushingBushingBushing
42-95044-509442-970
42-95044-5094
868588
1.00 / 1.001.00 / 1.00
-- Non Adj. Non Adj. - - / -
Mazda Navajo 4WD1991-1994
X BushingBushing
42-95044-5094
42-95044-5094
8685
1.00 / 1.001.00 / 1.00 - Non Adj. Non Adj. - - / -
Mazda Protege1990-2003
X
-Magna Cam
Axis CamWedge Kit
Performance Kit
Fac Adj.41-1462
41-21241-30041-1460
Fac Adj.
-56576258
- / -0.30 0.30 0.30
-
Magna CamAxis CamWedge Kit
41-1473
41-21241-300
Fac Adj.565762
0.30 / -0.30 0.30
Mazda RX71979-1985
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Fac Adj.
-5657
- / -0.30 0.30
- Non Adj. Non Adj. - - / -
Mazda RX71986-1991
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Fac Adj.
-5657
- / -0.30 0.30
- Non Adj. Fac Adj. - - / -
Mazda RX71993-1995
X-
Magna CamAxis Cam
Fac Adj.41-1462
41-212Fac Adj.
-5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Mazda Tribute AWD/FWD2001-2011
X Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30 Rear Arm 46-2179 Fac Adj. 78 - / -
MERCEDES-BENZ
All Mercedes1978-2014
X - Fac Adj. Fac Adj. - 88-9188 - / - - Non Adj. Fac Adj. - - / -
Mercedes- Benz C-Class2001-2014
X Axis Cam 41-214 Fac Adj. 57 0.30 / - - Non Adj. Fac Adj. - - / -
Mercedes-Benz E-Class2010-2014
X Axis Cam 41-215 Non Adj. 57 0.30 / - - Non Adj. Fac Adj. - - / -
Mercedes-Benz Sprinter2004-2008
X Shim 42-4431 Non Adj. 88 0.30 / - - Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
MAZDA MERCEDES-BENZ
38A
PPLI
CAT
ION
GU
IDE
MERCURY MERCURY
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Mercedes-Benz Sprinter 2500
2010-2014
X Axis Cam 41-214 Non Adj. 57 0.30 / - - Non Adj. - -
Mercedes-Benz Sprinter 3500
2010-2014
X Axis Cam 41-216 Non Adj. 57 0.30 / - - Non Adj. - -
MERCURY
Mercury Capri1980-1986
X -Wedge Kit
Fac Adj.41-310 Non Adj. -
63- / -
0.30 - Non Adj. Non Adj. - - / -
Mercury Capri1991-1994
X-
Magna CamWedge Kit
Fac Adj.41-1473
41-300Fac Adj.
-5662
- / -0.30 0.30
Magna CamWedge Kit
41-1473
41-300Fac Adj.46-205
5662
0.30 / -0.30 / 0.30
Mercury Cougar1980-1988
X -Wedge Kit
Fac Adj.41-310 Non Adj. -
63 88-4511- / -
0.30 - Non Adj. Non Adj. - - / -
Mercury Cougar1989-1997
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Mercury Cougar1999-2002
X - Non Adj. Non Adj. - 88-9416 - / - - Non Adj. Fac Adj. - - / -
Mercury Grand Marquis1991-2002
X - Fac Adj. Fac Adj. - 88-9412 - / - - Non Adj. Non Adj. - - / -
Mercury Grand Marquis2003-2011
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Mercury LN71982-1983
X - Non Adj. Non Adj. - - / - Wedge Kit 46-201 Fac Adj. 68 0.40 / -
Mercury Lynx1981-1985
X - Non Adj. Non Adj. - - / - Wedge Kit 46-201 Fac Adj. 68 0.40 / -
Mercury Lynx1986-1987
X Tower Plate 41-4601 41-4601 64 88-4602 0.50 / 0.50 Wedge Kit 46-201 Fac Adj. 68 0.40 / -
Mercury Marauder2003-2004
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Mercury Mariner AWD/FWD
2005-2011
X Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30 Rear Arm 46-2179 Fac Adj. 78 - / -
Mercury Marquis1983-1986
X -Wedge Kit
Fac Adj.41-310 Non Adj. -
63- / -
0.30 - Non Adj. Non Adj. - - / -
Mercury Milan2006-2010
X Ball Joint 41-236 41-236 60 0.90 / 0.90 - Non Adj. Fac Adj. - - / -
Mercury Montego FWD/AWD
2005-2007
X - Fac Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Mercury Montego FWD2005-2007
X - Fac Adj. Fac Adj. - - / - Camber Kit 46-135 Fac Adj. 71 0.75 / -
Mercury Monterrey2004-2007
X -Tower Plate
Fac Adj.41-4609 Fac Adj. -
64- / -
0.90 - Non Adj. Non Adj. - - / -
Mercury Mountaineer 2WD/4WD
1997-2001
X Camber KitCam Bolt
44-76744-768 44-767 89
980.30 / 0.30
0.30 ShimShim
46-11001
46-2200146-11001
46-220017472 88-343
0.60 / 0.600.60 / 0.60
Mercury Mountaineer 2WD/4WD 2002 X
Alignment Washers
Camber Kit
44-76944-7718
44-76944-7718
9898 88-8926
0.30 / 0.300.30 / 0.30
Alignment Washers
Camber Kit
44-76944-7738 46-9812 98
980.30 / -0.30
Mercury Mountaineer 2WD/4WD
2003-2005
XAlignment Washers
Camber Kit
44-76944-7718
44-76944-7718
9898 88-8926
0.30 / 0.300.30 / 0.30
Alignment Washers
Camber Kit
44-76944-7738 46-9811 98
980.30 / -0.30
Mercury Mountaineer 2WD/4WD
2006-2010
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Mercury Mystique1995-2000
X - Non Adj. Non Adj. - 88-9416 - / - - Non Adj. Fac Adj. - - / -
Mercury Sable Sedan1986-1990
X -Tower Plate
Fac Adj.41-4603
Fac Adj.41-4603
-64
88-130288-920088-9416
- / -0.50 / 0.50
BushingCam Bolt
46-13146-132
Fac Adj.46-131
7070 88-9416
0.50 / -0.30 / 0.50
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
39
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Mercury Sable Wagon1986-1990
X -Tower Plate
Fac Adj.41-4603
Fac Adj.41-4603
-64 88-9416
- / -0.50 / 0.50 Cam Bolt 46-136 Fac Adj.
46-133 71 88-130088-451188-9416
0.80 / - 0.50
Mercury Sable Sedan1991-1995
X -Tower Plate
Fac Adj.41-4605
Fac Adj.41-4605
-64
88-130288-920088-9416
- / -0.50 / 0.50
BushingCam Bolt
46-13146-132
Fac Adj.46-131
7070 88-9416
0.50 / -0.30 / 0.50
Mercury Sable Wagon1991-1995
X -Tower Plate
Fac Adj.41-4605
Fac Adj.41-4605
-64 88-9416
- / -0.50 / 0.50 Cam Bolt 46-136 Fac Adj.
46-133 71 88-130088-451188-9416
0.80 / - 0.50
Mercury Sable Sedan1996-2005
X -Tower Plate
Fac Adj.41-4607 Fac Adj. -
6488-4520
88-7870C88-9416
- / -0.90
BushingCam Bolt
46-13146-134
Fac Adj.46-13146-134
7071 88-9200
88-9416
0.50 / -0.50 / 0.50
0.40
Mercury Sable Wagon1996-2005
X -Tower Plate
Fac Adj.41-4607 Fac Adj. -
64 88-452088-9416
- / -0.90 Cam Bolt 46-136 Fac Adj. 71 88-9066
88-94160.80 / -
Mercury Sable FWD2008-2009
X - Fac Adj. Fac Adj. - - / - Camber Kit 46-135 Fac Adj. 71 0.75 / -
Mercury Topaz1984-1994
X -Tower Plate
Fac Adj.41-4601
Fac Adj.41-4601
-64 88-4602
- / -0.50 / 0.50
Wedge KitBushing
46-20146-120 Fac Adj. 68
74 88-130388-9200
0.40 / -0.50
Mercury Tracer1987-1996
X
-Magna CamWedge Kit
Performance Kit
Fac Adj.41-1473
41-30041-1460
Fac Adj.
-566258
- / -0.30 0.30
-
Magna CamWedge Kit
Performance Kit
41-1473
41-30041-1470
Fac Adj.46-205
566258
0.30 / -0.30 / 0.30
-
Mercury Tracer1997-1998
X - Fac Adj. Fac Adj. - - / - Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Mercury Villager1993-2002
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
ShimShim
46-11001
46-2200146-11001
46-220017472 88-343
0.60 / 0.600.60 / 0.60
MINI
Mini Cooper Cooper S2002-2014
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
MITSUBISHI
Mitsubishi 3000GT1991-1998
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Mitsubishi 3000GT/3000AWD
1991-1999
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Mitsubishi Cordia1983-1988
X Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Mitsubishi Diamante Sedan
1992-1996
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Mitsubishi Diamante Wagon
1993-1996
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Mitsubishi Diamante1997-2004
X
Magna CamAxis Cam
Performance KitPerformance Kit
41-1473
41-21241-147041-5470
Non Adj.
565758-
0.30 / -0.30
--
ShimPerformance Kit
46-217041-5470 Fac Adj. 72
-0.30 / -
-
Mitsubishi Eclipse AWD1990-1994
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Mitsubishi Eclipse FWD1990-1994
X Magna CamWedge Kit
41-1473
41-212Non Adj. 56
57 88-7800A0.30 / -0.30
Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
Mitsubishi Eclipse AWD1995-1999
X Ball JointBall Joint
41-55041-553 Non Adj. 60
-0.90 / -0.90 Shim 46-2170 Fac Adj. 72 0.30 / -
Mitsubishi Eclipse FWD1995-1999
X Ball Joint 41-550 41-550 60 88-7800A 0.90 / 0.90 Shim 46-2170 Fac Adj. 72 0.30 / -
Mitsubishi Eclipse/Eclipse Spyder
2000-2012
X-
Magna CamAxis Cam
Fac Adj.41-1592
41-216Non Adj.
-5657
- / -0.30 0.30
Shim 46-2170 Fac Adj. 72 0.30 / -
Mitsubishi Expo/Expo LRV (All)
1992-1995
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Fac Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
MERCURY MITSUBISHI
40A
PPLI
CAT
ION
GU
IDE
MITSUBISHI NISSAN
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Mitsubishi Galant FWD1985-1993
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Mitsubishi Galant AWD1989-1993
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Mitsubishi Galant FWD1994-1998
X Ball Joint-
41-55041-553 41-550 60
- 88-7800A0.90 / 0.90
- - Fac Adj. Fac Adj. - - / -
Mitsubishi Galant1999-2012
X Magna CamAxis Cam
41-1592
41-216Non Adj. 56
570.30 / -0.30 Shim 46-2170 Fac Adj. 72 0.30 / -
Mitsubishi Lancer2002-2014
X Axis Cam 41-214 Non Adj. 57 0.30 / - -Rear Arm
Fac Adj.46-2178 Fac Adj. -
94- / --
Mitsubishi Mirage1985-1992
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Mitsubishi Mirage1993-2002
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Mitsubishi Montero/Montero Sport 4WD
1983-2001
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Mitsubishi Pickup 2WD/4WD
1985-1996
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Mitsubishi Montero 2WD1997-2001
X -Shim
Fac Adj.CC Non Adj. -
-- / -- - Non Adj. Non Adj. - - / -
Mitsubishi Montero 4WD2002-2008
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Mitsubishi Outlander2003-2014
X Axis Cam 41-214 Non Adj. 57 0.30 / - -Rear Arm
Non Adj.46-2178 Fac Adj. -
94- / -
0.60
Mitsubishi Precis1988-1993
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Mitsubishi Sigma1989-1990
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Mitsubishi Tredia1983-1988
X Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Mitsubishi Van/Wagon1987-1990
X - Fac Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
NISSAN
Nissan 200SX1995-1998
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Nissan 240SX1989-1998
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Nissan 300ZX1990-1996
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Nissan 350Z2003-2009
X - Non Adj. Non Adj. - - / - -Rear Arm
Fac Adj.46-2199 Fac Adj. -
82- / -
0.50
Nissan 370Z2009-2014
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj.46-141 - - / -
0.30
Nissan Altima1993-2001
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Nissan Altima2002-2006
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Nissan Altima2007-2012
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30
-Rear Arm
Fac Adj.46-2199 Fac Adj. -
82- / --
Nissan Altima2013-2014
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
41
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Nissan Armada (ProRYDE)2005-2008
X 74-4000N
Nissan Armada 2WD/4WD2005-2014
X Camber Kit 44-820 44-820 102 0.30 / 0.30 - Non Adj. Non Adj. - - / -
Nissan Cube2010-2014
X Axis CamMagna Cam
41-21441-1582
5756
0.30 0.30 Shim
46-1500 SERIES1
46-1500SERIES1 74 0.60 / 0.60
Nissan Frontier 2WD/4WD1998-2004
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Nissan Frontier 2WD/4WD2005-2014
X Camber Kit 44-820 44-820 102 0.30 / 0.30 - Non Adj. Non Adj. - - / -
Nissan Juke2011-2014
X Axis CamMagna Cam
41-21441-1582
5756
0.30 0.30
ShimShim
46-1300 SERIES1
46-24001
46-1300SERIES1
46-24001
7472
0.60 / 0.600.60 / 0.60
Nissan Leaf2011-2014
X Axis Cam 41-214 Non Adj. 57 0.30 / - Shim46-1120 SERIES1
46-1120SERIES1 74 0.60 / 0.60
Nissan Maxima Sedan/Wagon
1985-1994
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Fac Adj. - - / -
Nissan Maxima1995-2014
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Nissan Murano2003-2014
X Axis CamCamber Kit
41-21441-1572 Non Adj. 57
560.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Nissan NX Coupe1991-1993
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Nissan Pathfinder 2WD/4WD
1987-1995
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Nissan Pathfinder 2WD/4WD
1996-2004
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Nissan Pathfinder 2WD/ 4WD
2005-2014
X Camber Kit 44-820 44-820 102 0.30 / 0.30 - Non Adj. Non Adj. - - / -
Nissan Pickup 2WD/4WD1995-2000
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Nissan Pulsar 1983 X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30 - Non Adj. Non Adj. - - / -
Nissan Pulsar NX1987-1990
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Nissan Quest1993-2002
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
ShimShim
46-11001
46-2200146-11001
46-220017472 88-343
0.60 / 0.600.60 / 0.60
Nissan Quest2004-2014
X Magna CamAxis Cam
41-1572
41-214Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Nissan Rogue2008-2014
X Axis Cam 41-214 Non Adj. 57 0.30 / - - Non Adj. Fac Adj. - - / -
Nissan Sentra1982-1986
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Nissan Sentra1987-1994
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Nissan Sentra1995-2006
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Nissan Sentra2007-2012
X Magna CamAxis Cam
41-1572
41-214Non Adj. 56
570.30 / -0.30 Shim 46-1120A 46-1120A 74 0.60 / 0.60
Nissan Sentra2013-2014
X Magna CamAxis Cam
41-1572
41-214Non Adj. 56
570.30 / -0.30
Nissan Stanza1982-1992
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Fac Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
NISSAN NISSAN
42A
PPLI
CAT
ION
GU
IDE
NISSAN OLDSMOBILE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Nissan Stanza Wagon AWD
1986-1988
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
Wedge Kit 41-305 Fac Adj. 62 0.30 / -
Nissan Titan (ProRYDE)2004-2009
X 74-4000N
Nissan Titan 2WD/4WD2004-2014
X Camber Kit 44-820 44-820 102 0.30 / 0.30 - Non Adj. Non Adj. - - / -
Nissan Van/XE/GXE1987-1988
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Nissan Versa2007-2011
X Magna CamAxis Cam
41-1572
41-214Non Adj. 56
570.30 / -0.30 Shim
46-1500 SERIES1
46-1500SERIES1 74 0.60 / 0.60
Nissan Versa2012-2014
X Magna CamAxis Cam
41-1572
41-214Non Adj. 56
570.30 / -0.30
ShimShim
46-1000 SERIES1
46-21001
46-1000SERIES1
46-21001
7372
0.60 / 0.600.60 / 0.60
Nissan Xterra 2WD2000-2005
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Nissan Xtreea2005-2014
X Cam Bolt 44-820 44-820 102 0.30 / - - Non Adj. Non Adj. - - / -
OLDSMOBILE
Oldsmobile Achieva1992-1995
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Oldsmobile Achieva1996-1998
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472 88-343
0.60 / 0.600.60 / 0.60
Oldsmobile Alero1999-2004
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-14441-212 Fac Adj. 56
570.30 / -0.30
Oldsmobile Aurora1995-1999
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
-Shim
Non Adj.46-1500 SERIES1
Fac Adj.46-1500SERIES1
-74
- / -0.60 / 0.60
Oldsmobile Aurora2001-2003
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
Shim 46-1900 Fac Adj. - 0.80 / -
Oldsmobile Bravada AWD1991-2001
X -Cam Bolt
Fac Adj.41-8246
Fac Adj.41-8246
-61
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
Oldsmobile Bravada 2WD/4WD
2002-2004
X Camber-CasterTool 88-8929 88-8929 - - / - - Non Adj. Non Adj. - - / -
Oldsmobile Calais1985-1987
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Oldsmobile All RWD1975-1992
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Oldsmobile Cutlass1997-1999
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-14441-212 Fac Adj. 56
570.30 / -0.30
Oldsmobile Cutlass Ciera/Cruiser
1986-1996
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.60 0.30
ShimShim
46-13001
46-2400146-13001
46-240017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Oldsmobile Cutlass Supreme
1988-1997
X -Shim
Fac Adj.45-70104 Non Adj. -
- 88-060 - / -0.50
Magna CamAxis Cam
41-1602
41-216Fac Adj. 56
57 88-89230.30 / -0.30
Oldsmobile Delta 88 Royale FWD
1986-1991
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Magna CamShimShim
41-1602
46-13001
46-24001
Fac Adj.46-13001
46-24001
567472
88-05088-111088-343
0.30 / -0.60 / 0.600.60 / 0.60
Oldsmobile Firenza1982-1983
X Cam Bolt 41-8245 Non Adj. 61 88-4511 0.40 / - ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Oldsmobile Firenza1984-1988
X Magna CamAxis Cam
41-1602
41-216Non Adj. 56
570.30 / -0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
43
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Oldsmobile Intrigue1998-2002
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
Oldsmobile Eighty-Eight/LSS
1996-1999
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Magna CamShimShim
41-1602
46-13001
46-24001
Fac Adj.567472
88-05088-111088-343
0.30 / -0.60 0.60
Oldsmobile Omega1980-1984
X Cam Bolt 41-8245 Non Adj. 61 0.30 / - ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Oldsmobile Regency1997-1998
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
-Magna Cam
ShimShim
Fac Adj.41-1602
46-13001
46-24001
Fac Adj.46-13001
46-24001
-567472
88-05088-111088-343
- / -0.30 / 0.60
0.60 / -0.60
Oldsmobile Silhouette1990-1996
X Magna CamAxis Cam
41-1602
41-216Non Adj. 56
570.30 / -0.30
ShimShim
46-13001
46-2400146-13001
46-240017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Oldsmobile Silhouette1997-2004
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-13001
46-2400146-13001
46-240017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Oldsmobile Silhouette AWD
2002-2004
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Oldsmobile Toronado1966-1978
X -Cam Bolt
Fac Adj.41-8247
Fac Adj.41-8247
-61
- / -1.00 / 1.00 - Non Adj. Non Adj. - - / -
Oldsmobile Toronado1979-1985
X -Cam Bolt
Fac Adj.41-8247
Fac Adj.41-8247
-61
- / -1.00 / 1.00
ShimShim
46-13001
46-2400146-13001
46-240017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Oldsmobile Toronado/Trofeo
1986-1992
X Magna CamAxis Cam
41-1602
41-216Fac Adj. 56
570.30 / -0.30 Shim 46-1600 Fac Adj. 75 0.60 / -
PLYMOUTH
Plymouth Acclaim1989-1995
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Plymouth Breeze1996-2000
X Ball Joint 41-230 41-230 60 0.90 / 0.90 - Fac Adj. Fac Adj. - - / -
Plymouth Caravelle1985-1988
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Plymouth Champ1979-1982
X Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Plymouth Colt1984-1991
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Plymouth Colt1992-1994
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Plymouth Horizon/TC31978-1990
X -Cam Bolt
Fac Adj.41-8248 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Plymouth Laser 2WD1990-1994
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Plymouth Laser AWD1992-1994
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Plymouth Neon1995-2001
X Magna CamAxis Cam
41-1572
41-214Non Adj. 56
570.30 / -0.30
-Wedge Kit
Fac Adj.41-300 Fac Adj. -
62- / -
0.30
Plymouth Prowler1997-2001
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Plymouth Reliant1981-1983
X -Cam Bolt
Fac Adj.41-8248 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Plymouth Reliant1984-1989
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Plymouth Scamp 1983 X -Cam Bolt
Fac Adj.41-8248 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
OLDSMOBILE PLYMOUTH
44A
PPLI
CAT
ION
GU
IDE
PLYMOUTH PONTIAC
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Plymouth Sundance1987-1994
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Plymouth Trailduster 2WD1977-1981
X -Cam Bolt
Fac Adj.41-8243
Fac Adj.41-8243
-61
- / -0.60 / 0.60 - Non Adj. Non Adj. - - / -
Plymouth Trailduster 4WD1977-1981
X Bushing 44-2460 44-2460 - 88-7090 0.80 / 0.80 - Non Adj. Non Adj. - - / -
Plymouth Turismo1983-1985
X -Cam Bolt
Fac Adj.41-8248 Non Adj. -
-- / -
0.30 ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Plymouth Voyager FWD1984-1995
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 ShimShim
46-11001
46-2200146-11001
46-220017472 88-343
0.60 / 0.600.60 / 0.60
Plymouth Voyager AWD1991-1995
X -Cam Bolt
Fac Adj.41-8249 Non Adj. -
-- / -
0.30 - Non Adj. Non Adj. - - / -
Plymouth Voyager AWD1996-2000
X-
Magna CamAxis Cam
Fac Adj.41-1572
41-214Non Adj.
-5657
- / -0.30 0.30
- Non Adj. Non Adj. - - / -
Plymouth Voyager FWD1996-2000
X-
Magna CamAxis Cam
Fac Adj.41-1572
41-214Non Adj.
-5657
- / -0.30 0.30
Shim 46-11201 46-11201 74 88-34388-4519 0.60 / 0.60
PONTIAC
Pontiac 60001982-1991
X -Cam Bolt
Fac Adj.41-8245 Non Adj. -
61- / -
0.30 ShimShim
46-13001
46-2400146-13001
46-240017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Pontiac 6000 STE AWD1986-1991
X -Cam Bolt
Fac Adj.41-8245 Non Adj. -
61- / -
0.30 -
Cam BoltFac Adj.41-8245 Fac Adj. -
61- / -
0.30
Pontiac Astre1975-1977
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Pontiac Aztek2001-2005
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30
ShimShim
46-13001
46-2400146-13001
46-240017472 88-343
0.60 / 0.600.60 / 0.60
Pontiac Aztek AWD2001-2005
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Pontiac Bonneville1987-1999
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Magna CamShim
41-1602
46-13001
Fac Adj.46-13001
46-24001
5674
88-05088-111088-343
0.30 / -0.60 / 0.60
0.60
Pontiac Bonneville2000-2005
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Fac Adj.
-5657
- / -0.30 0.30
Shim 46-1900 Fac Adj. - 0.80 / -
Pontiac Fiero1984-1988
X - Fac Adj. Fac Adj. - - / - Cam Bolt 41-8245 Fac Adj. 61 0.30 / -
Pontiac Firebird1967-1981
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Pontiac Firebird1982-1992
X - Fac Adj. Fac Adj. - 88-8922 - / - - Non Adj. Non Adj. - - / -
Pontiac Firebird1993-2002
X - Fac Adj. Fac Adj. - 88-8925 - / - - Non Adj. Non Adj. - - / -
Pontiac Firefly (Canada)1989-2000
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Pontiac G52007-2010
X Axis CamMagna Cam
41-21241-1473 Non Adj. 57
560.30 / -0.30
-Shim
Fac Adj.46-1520 SERIES1
Fac Adj.46-1520SERIES1
-74
- / -0.60 / 0.60
Pontiac G62005-2010
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
-Shim
Cam Bolt
Fac Adj.46-1520A
46-425
Fac Adj.46-1520A
-7473
- / -0.60 / 0.60
0.30
Pontiac G82008-2009
X Axis CamMagna Cam
41-21441-1582 Fac Adj. 57
560.30 / -0.30
-Cam Bolt
Fac Adj.46-182
Fac Adj.46-182
-68
- / -0.30 / 0.30
Pontiac Grand Am1985-1995
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657 88-4511
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
45
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Pontiac Trans Am1993-2002
X - Fac Adj. Fac Adj. - 88-8925 - / - - Non Adj. Non Adj. - - / -
Pontiac Grand Am1996-1998
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Pontiac Grand Am1999-2003
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-14441-212
Fac Adj.-
5657
- / -0.30 0.30
Pontiac Grand Am2004-2005
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
0.30 / --
0.30
-Magna Cam
Axis Cam
Fac Adj.41-14441-212
Fac Adj.-
5657
- / -0.30 0.30
Pontiac Grand Prix1988-1996
X -Shim
Fac Adj.45-70104 Non Adj. -
- 88-060 - / -0.50
Magna CamAxis Cam
41-1602
41-216Fac Adj. 56
57 88-89230.30 / -0.30
Pontiac Grand Prix1997-2008
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
Pontiac GTO2004-2006
X Magna CamAxis Cam
41-1582
41-214Fac Adj. 56
570.30 / -0.30 - Non Adj. Fac Adj. - - / -
Pontiac Sunbird/J20001982-1994
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Pontiac LeMans1988-1993
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Pontiac Montana1999-2009
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
-Shim
Fac Adj.46-1300 SERIES1
Fac Adj.46-1300SERIES1
-74
- / -0.60 / 0.60
Pontiac Montana AWD2002-2009
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Pontiac Phoenix1980-1984
X Cam Bolt 41-8245 Non Adj. 61 0.30 / - ShimShim
46-12001
46-2300146-12001
46-230017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Pontiac Sunburst1985-1988
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30
ShimShim
46-10001
46-2100146-10001
46-210017372
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Pontiac Sunfire1995-2005
X
-Magna Cam
Axis CamPerformance Kit
Fac Adj.41-1582
41-21441-5571
Non Adj.
-5657-
- / -0.30 0.30
-
ShimShim
Performance Kit
46-12001
46-23001
41-5571
46-12001
46-23001
7472-
88-05088-111088-343
0.60 / 0.600.60 / 0.60
-
Pontiac Tempest (Canada)1988-1991
X Magna CamAxis Cam
41-1602
41-216Non Adj. 56
570.30 / -0.30
ShimShim
46-12001
46-2300146-12001
46-230017472 88-343
0.60 / 0.600.60 / 0.60
Pontiac Torrent2006-2009
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - 44-775 44-775 100 0.30 / 0.30
Pontiac Trans Am1990-1992
X - Fac Adj. Fac Adj. - 88-8922 - / - - Non Adj. Non Adj. - - / -
Pontiac Trans Sport1990-1996
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-13001
46-2400146-13001
46-240017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Pontiac Trans Sport1997-1999
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-13001
46-2400146-13001
46-240017472
88-05088-111088-343
0.60 / 0.600.60 / 0.60
Pontiac Vibe2003-2010
X-
Magna CamAxis Cam
Fac Adj.41-15141-217
Non Adj.-
5657
- / -0.30 0.30
Shim 46-15001 46-15001 74 0.60 / -
PORSCHE
Porsche 9111965-2014
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Porsche1977-1988
X Axis Cam 41-212 Fac Adj. 57 0.30 / - - Fac Adj. Fac Adj. - - / -
Porsche 9241977-1988
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
PONTIAC PORSCHE
46A
PPLI
CAT
ION
GU
IDE
PORSCHE SAAB
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Porsche 9281978-1995
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Porsche1983-1991
X Axis Cam 41-212 Fac Adj. 57 0.30 / - - Fac Adj. Fac Adj. - - / -
Porsche 9441983-1991
X Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Porsche 9681992-1995
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Porsche Boxster1997-2011
X - Fac Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
RAM
Dodge Ram 1500 (ProRYDE)
2011-2012
X 74-2000D
Dodge Ram 1500 (Mega Cab) (8-lug) 2wd
2011-2014
X - Fac Adj. Fac Adj. - - / -
Dodge Ram 1500 (Mega Cab) (8-lug) 4wd
2011-2014
X - Non Adj. Fac Adj. - - / -
Dodge Ram 1500 2WD/4WD (5-lug) (Exc. Mega Cab)
2011-2014
X Ball Joint 44-2489 44-2489 97 0.90 / 0.90 - Non Adj. Non Adj. - - / -
Dodge 2500/3500 P/U NS 4WD
2011-2014
X Ball Joint 44-2497 90 0.90 - Non Adj. Non Adj. - - / -
Dodge Truck 2500/3500 2WD
2011-2014
X - Fac Adj. Fac Adj. - - / -
Dodge 2500 HD /3500 2wd2011-2014
X - Fac Adj. Fac Adj. - - / -
Dodge 2500/3500 P/U NS 4WD
2011-2014
X Ball Joint 44-2497 Fac Adj. 90 0.90 / -
Dodge 4500 / 55002011-2014
X Ball Joint 44-2610 44-2610 96 1.00 / 1.00 - Non Adj. Non Adj. - - / -
RENAULT
AMC Alliance1983-1986
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
- Non Adj. Non Adj. - - / -
Renault Alliance1983-1987
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Renault Encore1984-1986
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
SAAB
Saab 9-2X2005-2006
X Axis Cam 41-214 Non Adj. 57 0.30 / - Axis Cam 41-214 Fac Adj. 57 0.30 / -
Saab 9-31999-2011
X Axis Cam 41-212 Non Adj. 57 0.30 / - Cam Bolt 46-425 Non Adj. 73 0.30 / -
Saab 9-5 Sedan/Wagon1999-2009
X Axis Cam 41-212 Non Adj. 57 0.30 / - - Non Adj. Non Adj. - - / -
Saab 9-7x2005-2009
X Camber-CasterTool 88-8929 88-8929 - - / - - Non Adj. Non Adj. - - / -
Saab 9001979-1993
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Saab 9001994-1998
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Saab 900 Convertible 1994 X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Saab 90001986-1998
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30 - Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
47
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
SATURN
Saturn Astra2008-2009
X Axis CamMagna Cam
41-21241-1473 Non Adj. 57
560.30 / -0.30 - Non Adj. Non Adj. - - / -
Saturn Aura2007-2009
X Axis Cam 41-212 Non Adj. 57 0.30 / --
ShimBall Joint
Fac Adj.46-1200A
46-425
Fac Adj.46-1200A
-7473
- / -- / --
Saturn Ion2004-2007
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
Shim 46-15201 46-15201 74 0.06 / 0.06
Saturn L Series2000-2005
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-12001
46-23001Fac Adj. 74
720.60 / -0.60
Saturn GM EV-11997-2001
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Saturn Outlook2007-2010
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
-Camber Kit
Fac Adj.46-421 Fac Adj. -
93 88-7996A- / -
1.00
Saturn Relay AWD2005-2007
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Saturn Relay FWD2005-2007
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30
ShimShim
46-13001
46-2400146-13001
46-240017472
0.60 / 0.600.60 / 0.60
Saturn All Models1991-1998
X Magna CamAxis Cam
41-1582
41-214Fac Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1582
41-214Fac Adj.46-406
5657
0.30 / -0.30 / 0.60
Saturn S Series1991-2002
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1582
41-21446-406
-5657
- / -0.30 0.30
Saturn Vue2002-2006
X-
Magna CamAxis Cam
Fac Adj.41-1572
41-214Non Adj.
-5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Saturn Vue2007-2009
X-
Magna CamAxis Cam
Fac Adj.41-1572
41-214Non Adj.
-5657
- / -0.30 0.30
- 44-775 44-775 100 0.30 / 0.30
SCION
Scion FR-S2013-2014
X - Fac Adj. Non Adj. - - / - - Fac Adj. 46-2177 - - / -
Scion iQ2012-2014
X Shim46-1500 SERIES1
46-1500SERIES1 74 0.60 / 0.60
Scion tC2005-2014
X Magna CamCam Bolt
41-15141-217 Non Adj. 56
570.30 / -0.30 Shim
46-1500 SERIES1 Fac Adj. 74 0.60 / -
Scion xA2004-2006
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 Shim 46-15001 46-15001 74 0.60 / -
Scion xB2004-2014
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 Shim
46-1500 SERIES1
46-1500SERIES1 74 0.60 / -
Scion xD2008-2014
X Axis CamMagna Cam
41-21541-149 Non Adj. 57
560.30 / -0.30 Shim
46-1500 SERIES1
46-1500SERIES1 74 0.60 / 0.60
STERLING
Sterling All Models1987-1991
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
SUBARU
Subaru Baja2003-2006
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
Axis Cam 41-214 Non Adj. 57 0.30 / -
Subaru Impreza FWD/AWD2008-2014
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1582
41-214Fac Adj.46-2177
5657
0.30 / -0.30 / -
Subaru Forester1998-2007
X --
Fac Adj.41-214 Non Adj. -
57- / -- - Non Adj. Fac Adj. - - / -
Subaru Forester2009-2015
X --
Fac Adj.41-214 Non Adj. -
57- / -- - Non Adj. Fac Adj.
46-2177 - - / - -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
SATURN SABARU
48A
PPLI
CAT
ION
GU
IDE
SUBARU TOYOTA
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Subaru Impreza FWD/AWD1993-2007
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Fac Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1582
41-214Fac Adj. 56
570.30 / -0.30
Subaru WRX2002-2007
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1582
41-214Fac Adj. 56
570.30 / -0.30
Subaru Justy1987-1994
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Subaru Legacy 2WD/4WD1990-1999
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1582
41-214Fac Adj. 56
570.30 / -0.30
Subaru Legacy2000-2009
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30 - Non Adj. Non Adj. - - / -
Subaru Legacy2010-2015
X Axis CamMagna Cam
41-21441-1582 Non Adj. 57
560.30 / -0.30 - Non Adj. 46-2177 - - / -
Subaru Loyale FWD/AWD1990-1994
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Subaru Outback2000-2009
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
- Non Adj. Fac Adj. - - / -
Subaru Outback2010-2014
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
- Non Adj. 46-2177 - - / -
Subaru SVX1992-1997
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
Magna CamAxis Cam
41-1582
41-214Fac Adj. 56
570.30 / -0.30
Subaru XT1985-1991
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
SUZUKI
Suzuki Aerio2002-2007
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Suzuki Equator2009-2011
X Camber Kit 44-820 44-820 102 0.30 / - Cam Bolt 44-775 Non Adj. 100 0.30 / -
Suzuki Esteem1995-2002
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Suzuki Grand Vitara 2WD1999-2014
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 Axis Cam 41-212 Non Adj. 57 0.30 / -
Suzuki Samurai 2WD1985-1995
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Suzuki Sidekick 2WD1989-1998
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Suzuki Swift1989-2001
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30 - Non Adj. Fac Adj. - - / -
Suzki SX42007-2014
X Axis CamMagna Cam
41-21241-1473 Non Adj. 57
560.30 / -0.30 - Non Adj. Non Adj. - - / -
Suzuki Verona2004-2006
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
- Non Adj. Fac Adj. - - / -
Suzuki Vitara 2WD1999-2004
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Suzuki X-90 2WD1996-1998
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Suzuki XL-72002-2006
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Suzuki XL-72007-2009
X Axis Cam 41-214 Non Adj. 57 0.30 / - --
Fac Adj.44-775
Fac Adj.44-775
-100
- / -0.30 / 0.30
TOYOTA
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
49
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Toyota 4 Runner 2WD/4WD
1984-1989
X -Shim
Fac Adj.CC Fac Adj. -
-- / -- - Non Adj. Non Adj. - - / -
Toyota 4 Runner 2WD/4WD
1996-2002
X -Cam Bolt
Fac Adj.44-826
Fac Adj.44-826
-102
- / -- / - - Non Adj. Non Adj. - - / -
Toyota 4 Runner 2WD/4WD
2003-2009
X -Cam Bolt
Fac Adj.44-827
Fac Adj.44-827
-103
- / -- / - - Non Adj. Non Adj. - - / -
Toyota 4Runner2010-2014
X - Fac Adj. - 71-5500T -
Toyota 4Runner 2WD/4WD2010-2014
X ShimCam Bolt
CC44-828
Fac Adj.44-828
-103
- / -- / - - Non Adj. Non Adj. - - / -
Toyota Avalon1995-2012
X Magna CamAxis Cam
41-15141-217 Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
ShimShim
41-14941-21546-1300 SERIES1
46-24001
Fac Adj.46-1300SERIES1
46-24001
56577472
88-343
0.30 / -0.30 / 0.600.60 / 0.60
0.60
Toyota Avalon2013-2014
X Magna CamAxis Cam
41-15141-217 Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-15141-217 Fac Adj. 56
57 88-3430.30 / -0.30
Toyota Camry1983-1987
X Magna CamAxis Cam
41-1473
41-21245-6001 56
570.30 / 0.20
0.30 Magna CamWedge Kit
41-1473
41-300Fac Adj. 56
620.30 / -0.30
Toyota Camry1987-1991
X Magna CamWedge Kit
41-15141-305 45-6001 56
620.30 / 0.20
0.30 Magna Cam
Axis Cam41-14941-215 Fac Adj. 56
570.30 / -0.30
Toyota Camry Alltrac1988-1991
X Magna CamAxis Cam
41-15141-217 Fac Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-14941-215 Fac Adj. 56
570.30 / -0.30
Toyota Camry/Solara1992-2014
X-
Magna CamAxis Cam
Fac Adj.41-15141-217
Non Adj.-
5657
- / -0.30 0.30
Magna CamAxis Cam
41-14941-215 Fac Adj. 56
570.30 / -0.30
Toyota Celica FWD1986-1989
X Magna CamWedge Kit
41-14941-301 Non Adj. 56
620.30 / -0.30
Magna CamWedge Kit
41-14941-301 Fac Adj. 56
620.30 / -0.30
Toyota Celica Alltrac1988-1989
X Magna CamAxis Cam
41-14941-215 Non Adj. 56
570.30 / -0.30 - Non Adj. Fac Adj. - - / -
Toyota Celica1990-1993
X-
Magna CamWedge Kit
Fac Adj.41-14941-305
Non Adj.-
5662
- / -0.30 0.30
Magna CamAxis Cam
41-14941-215 Fac Adj. 56
570.30 / -0.30
Toyota Celica Alltrac1990-1993
X - Non Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Toyota Celica/ST/GT/GT-S1994-2005
X Magna CamAxis Cam
41-14941-215 Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-14941-215 Fac Adj. 56
570.30 / -0.30
Toyota Celica GT/GT-S2000-2005
X-
Magna CamAxis Cam
Fac Adj.41-14941-215
Non Adj.-
5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Toyota Corolla FWD1984-1987
X Magna CamWedge Kit
41-1473
41-300Non Adj. 56
620.30 / -0.30
Magna CamWedge Kit
ShimShim
41-1473
41-30046-13001
46-24001
Fac Adj.46-13001
46-24001
56627472
88-343
0.30 / -0.30 / 0.600.60 / 0.60
0.60
Toyota Corolla FX-161987-1988
X-
Magna CamWedge Kit
Fac Adj.41-1473
41-300Non Adj.
-5662
- / -0.30 0.30
Magna CamWedge Kit
ShimShim
41-1473
41-30046-13001
46-24001
46-13001
46-24001
56627472
88-343
0.30 / 0.600.30 / 0.60
0.60 0.60
Toyota Corolla Alltrac1988-1992
X Magna CamWedge Kit
41-14941-305 Non Adj. 56
620.30 / -0.30 - Non Adj. Non Adj. - - / -
Toyota Corolla FWD1988-1992
X Magna CamWedge Kit
41-14941-305 Non Adj. 56
620.30 / -0.30
Magna CamWedge Kit
ShimShim
41-1473
41-30046-13001
46-24001
Fac Adj.
56627472
88-343
0.30 / -0.30 0.60 0.60
Toyota Corolla1993-2002
X-
Magna CamAxis Cam
Fac Adj.41-14941-215
Non Adj.-
5657
- / -0.30 0.30
Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30
Toyota Corolla2003-2008
X-
Magna CamAxis Cam
Fac Adj.41-14941-215
Non Adj.-
5657
- / -0.30 0.30
Shim 46-15001 46-15001 74 0.60 / -
Toyota Corolla2009-2014
X-
Magna CamAxis Cam
Fac Adj.41-1592
41-216Non Adj.
-5657
- / -0.30 0.30
Shim 46-15001 46-15001 74 0.60 / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
TOYOTA TOYOTA
50A
PPLI
CAT
ION
GU
IDE
TOYOTA TOYOTA
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Toyota Cressida1989-1992
X - Non Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Toyota Echo2000-2005
X-
Magna CamAxis Cam
Fac Adj.41-14941-215
Non Adj.-
5657
- / -0.30 0.30
Shim46-1500 SERIES1
Non Adj.46-1500SERIES1
74 0.60 / - 0.60
Toyota FJ Cruiser2007-2009
X -Cam Bolt
Fac Adj.44-827
Fac Adj.44-827
-103
- / -- / - - Non Adj. Non Adj. - - / -
Toyota FJ Cruiser2010-2014
X -Cam Bolt
Fac Adj.44-828
Fac Adj.44-828
-103
- / -- / - - Non Adj. Non Adj. - - / -
Toyota Highlander 2WD/4WD
2001-2011
X-
Magna CamAxis Cam
Fac Adj.41-15141-217
Fac Adj.-
5657
- / -0.30 0.30
Magna CamAxis Cam
41-14941-215 Fac Adj. 56
570.30 / -0.30
Toyota Highlander 2WD/4WD
2008-2014
X-
Magna CamAxis Cam
Fac Adj.41-15141-217
Fac Adj.-
5657
- / -0.30 0.30
Magna CamAxis Cam
41-15141-217 Fac Adj. 56
570.30 / -0.30
Toyota Land Cruiser1979-2014
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Toyota Matrix AWD2003-2013
X-
Magna CamAxis Cam
Fac Adj.41-15141-217
Non Adj.-
5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Toyota Matrix FWD2003-2013
X-
Magna CamAxis Cam
Fac Adj.41-15141-217
Non Adj.-
5657
- / -0.30 0.30
Shim 46-15001 46-15001 74 0.60 / -
Toyota MR-21985-1989
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Fac Adj.
-5657
- / -0.30 0.30
-Magna Cam
Axis Cam
Fac Adj.41-1473
41-212Fac Adj.
-5657
- / -0.30 0.30
Toyota MR-21991-1995
X Magna CamAxis Cam
41-14941-215 Fac Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-14941-215 Fac Adj. 56
570.30 / -0.30
Toyota MR2 Spyder2000-2006
X Magna CamAxis Cam
41-14941-215 Non Adj. 56
570.30 / -0.30
Magna CamAxis Cam
41-14941-215 Fac Adj. 56
570.30 / -0.30
Toyota Paseo1992-1998
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Toyota Pickup 4WD1969-1995
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Toyota Pickup/cab and chassis 2WD
1973-1995
X -Shim
Fac Adj.CC Fac Adj. -
-- / -- - Non Adj. Non Adj. - - / -
Toyota Previa 2WD/4WD1991-1997
X Magna CamWedge Kit
41-15141-305 Non Adj. 56
620.30 / -0.30 - Non Adj. Non Adj. - - / -
Toyota Prius2005-2009
X-
Magna CamAxis Cam
Fac Adj.41-14941-215
Non Adj.-
5657
- / -0.30 0.30
Shim 46-15001 46-15001 74 0.60 / 0.60
Toyota Prius2010-2014
X Axis CamMagna Cam
41-21741-151 Non Adj. 57
560.30 / -0.30 Shim
46-1500 SERIES1
46-1500SERIES1 74 0.60 / 0.60
Toyota RAV-4 2WD/4WD1996-2014
X-
Magna CamAxis Cam
Fac Adj.41-1602
41-216Non Adj.
-5657
- / -0.30 0.30
- Fac Adj. Fac Adj. - - / -
Toyota Sequoia 2WD/4WD2001-2007
X -Cam Bolt
Fac Adj.44-826
Fac Adj.44-826
-102
- / -- / - - Non Adj. Non Adj. - - / -
Toyota Sequoia 2WD/4WD2008-2014
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Toyota Sienna 2WD1998-2014
X Magna CamAxis Cam
41-15141-217 Non Adj. 56
570.30 / -0.30 Shim 46-11201 46-11201 74 0.60 / -
Toyota Sienna 4WD1998-2014
X Magna CamAxis Cam
41-15141-217 Non Adj. 56
570.30 / -0.30 Shim Non Adj. Non Adj. - - / -
Toyota Supra1987-1998
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Toyota T100 2WD1993-1998
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Toyota T100 4WD1993-1998
X -Shim
Fac Adj.CC
Fac Adj.CC
--
- / -- / - - Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
51
APPLIC
ATION
GU
IDE
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Toyota Tacoma 2WD/4WD1995-2004
X ShimCam Bolt
CC44-826
Fac Adj.44-826
-102
- / -- / - - Non Adj. Non Adj. - - / -
Toyota Tacoma 2WD/4WD2005-2014
X ShimCam Bolt
CC44-827
Fac Adj.44-827
-103
- / -- / - - Non Adj. Non Adj. - - / -
Toyota Tercel (Except S/W)
1983-1999
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Fac Adj.
-5657
- / -0.30 0.30
Magna CamShimShim
Wedge Kit
41-1473
46-12001
46-23001
41-300
Fac Adj.46-12001
46-23001
56747262
88-343
0.30 / -0.60 / 0.600.60 / 0.60
0.30
Toyota Tercel (Except S/W)
1987-1998
X Magna CamAxis Cam
41-14941-215 Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Toyota Tundra 2WD/4WD2000-2006
X -Cam Bolt
Fac Adj.44-826
Fac Adj.44-826
-102
- / -- / - - Non Adj. Non Adj. - - / -
Toyota Tundra (ProRYDE)2007-2013
X 74-5000T
Toyota Tundra 2WD/4WD2007-2012
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Toyota Van 2WD/4WD1984-1989
X - Fac Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Toyota Venza2009-2014
X Axis CamMagna Cam
41-21741-151 Non Adj. 57
560.30 / -0.30
Axis CamMagna Cam
41-21741-151 Fac Adj. 57
560.30 / -0.30
Toyota Yaris2007-2014
X Axis CamMagna Cam
41-21541-149 Non Adj. 57
560.30 / -0.30 Shim 46-15001 46-15001 74 0.60 / 0.60
VOLKSWAGEN
Volkswagen Beetle1998-2010
X - Fac Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Volkswagen Cabriolet1985-1993
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Volkswagen Corrado1990-1995
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Volkswagen Dasher1974-1981
X - Fac Adj. Non Adj. - - / - ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Volkswagen Eurovan1992-2009
X - Fac Adj. Fac Adj. - - / - - Non Adj. Fac Adj. - - / -
Volkswagen Fox1987-1993
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Volkswagen Golf & GTI1985-1998
X
-Magna Cam
Axis CamPerformance Kit
Fac Adj.41-1473
41-21241-1450
Non Adj.
-565758
- / -0.30 0.30
-
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Volkswagen Golf & GTI1999-2006
X - Fac Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Volkswagen Golf & GTI2007-2012
X - Fac Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Volkswagen Golf & GTI2013-2014
X - Fac Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Volkswagen Jetta1980-1999
X
-Magna Cam
Axis CamPerformance Kit
Fac Adj.41-1473
41-21241-1450
Non Adj.
-565758
- / -0.30 0.30
-
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Volkswagen Jetta A41999-2010
X - Fac Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Volkswagen Passat1990-1997
X
-Magna Cam
Axis CamPerformance Kit
Fac Adj.41-1473
41-21241-1450
Non Adj.
-565758
- / -0.30 0.30
-
ShimShim
46-10001
46-2100146-10001
46-210017372 88-343
0.60 / 0.600.60 / 0.60
Volkswagen Passat1998-2005
X - Fac Adj. Fac Adj. - - / - ShimCaliper Shim
46-1500 SERIES1
46-2450A
Fac Adj.46-1500
74-
- / -- / - -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
TOYOTA VOLKSWAGEN
52A
PPLI
CAT
ION
GU
IDE
VOLKSWAGEN YUGO
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Volkswagen Rabbit1975-2009
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
ShimShim
46-10001
46-2100146-10001
46-210019599 88-343
0.60 / 0.600.60 / 0.60
Volkswagen Rabbit Pickup1980-1983
X - Fac Adj. Non Adj. - - / - ShimShim
46-10001
46-2100146-10001
46-210019599 88-343
0.60 / 0.600.60 / 0.60
Volkswagen Routan2009-2012
XAxis Cam
Magna CamBall Joint
41-21441-1572
41-8249Non Adj.
575663
0.30 / -0.30
-- Non Adj. Non Adj. - - / -
Volkswagen Scirocco1975-1988
X-
Magna CamWedge Kit
Fac Adj.41-1473
41-300Non Adj.
-5658
- / -0.30 0.30
Shim46-1000 SERIES1
46-10001
46-2100195 88-343
0.60 / 0.60 0.60
Volkswagen 4WD Touareg2004-2014
X - Fac Adj. Fac Adj. - - / - - Fac Adj. Fac Adj. - - / -
Volkswagen Eurovan/Vanagon
1980-1991
X - Fac Adj. Fac Adj. - - / - - Non Adj. Fac Adj. - - / -
VOLVO
Volvo 850 FWD/AWD1993-2010
X-
Magna CamAxis Cam
Fac Adj.41-1473
41-212Non Adj.
-5657
- / -0.30 0.30
- Non Adj. Fac Adj. - - / -
Volvo 940/960 w/Rear Multilink
1991-1994
X - Non Adj. Non Adj. - - / - - Fac Adj. Fac Adj. - - / -
Volvo 940/960 w/o Multilink
1991-1995
X - Non Adj. Fac Adj. - - / - - Non Adj. Non Adj. - - / -
Volvo 940/960 W/Mink Susp 1995 X - Fac Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
Volvo C302008-2013
X - Non Adj. Non Adj. - - / - Rear Arm 46-2188 Fac Adj. 103 0.50 / -
Volvo C70/S70/V701998-2010
X-
Magna CamAxis Cam
Fac Adj.41-1582
41-214Non Adj.
-5657
- / -0.30 0.30
- Non Adj. Fac Adj. - - / -
Volvo C702006-2013
X - Non Adj. Non Adj. - - / - Rear Arm 46-2188 Fac Adj. 103 0.50 / -
Volvo S40/V402000-2004
X Magna CamAxis Cam
41-1473
41-212Non Adj. 56
570.30 / -0.30 - Fac Adj. Fac Adj. - - / -
Volvo S402005-2011
X - Non Adj. Non Adj. - - / - Rear Arm 46-2188 Fac Adj. 103 0.50 / -
Volvo S60/AWD2001-2009
X - Fac Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Volvo S801999-2010
X Magna CamAxis Cam
41-1582
41-214Non Adj. 56
570.30 / -0.30 - Non Adj. Non Adj. - - / -
Volvo S90/V90 1998 X Magna CamAxis Cam
41-1473
41-212Fac Adj. 56
570.30 / -0.30 - Non Adj. Fac Adj. - - / -
Volvo V502005-2011
X - Non Adj. Non Adj. - - / - Rear Arm 46-2188 Fac Adj. 103 0.50 / -
Volvo XC902003-2014
X - Fac Adj. Non Adj. - - / - - Non Adj. Fac Adj. - - / -
YUGO
Yugo GV/GVL/GVS/GVX1986-1992
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Yugo GV/GVL/GVS/GVX1986-1992
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
Note: Front toe is always adjustable; when front adjusters are called for, they are primarily for the adjustment of camber. Note: When both “Factory Adjustable” and a product number appear in the same application, the factory provided adjustment is usually difficult to do and/or gives a limited amount of change. 1. Caution: When installing rear shim on disc brake applications, if caliper does not move with rotor, binding may occur. If equipped with ABS check for proper clearances. See part number 46-2450A on page 762. For models with either slotted or unslotted strut brackets.3. For models with slotted strut brackets only.4. For models without slotted strut brackets.5. For models WITH or WITHOUT ABS brakes and 10 1/2” rotors
6. On 1987-91 GM models, aftermarket cams are required for camber/caster adjustment. On 1992 and newer models, cam bolts are factory installed.7. Adjustable cam replaces factory locking plate.8. For models without factory provided cam bolts9. For truck models with rear camber
MODEL YEAR
TOTAL
THRUST
ADJ.METHOD
CAMBERPART #
CASTERPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
ADJ.METHOD
CAMBERPART #
TOEPART #
PROPAGENO.
SPECIALTOOL
ORPRODUCT
EST.INSTALLHOURS
PERWHEEL
Yugo GV/GVL/GVS/GVX1986-1992
X - Non Adj. Non Adj. - - / - - Non Adj. Non Adj. - - / -
??? ????
53Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
ALIG
NM
ENT C
ORRECTIO
N PRO
DU
CTS
ALIGNMENT CORRECTION PRODUCTSFOR VEHICLES WITHOUT FACTORY PROVIDED
ALIGNMENT CAPABILITY
FOR UP-TO-THE-MINUTE PRODUCTAPPLICATIONS CHECK OUT:
WWW.STEMPF.COM & STEMPFONLINE.COM.
??? ????54
See Application Guide, pages 8-52, for specific models and years
UN
DER
STA
ND
ING
WH
EEL
ALI
GN
MEN
T
UNDERSTANDING WHEEL ALIGNMENT
• Wheel alignment is the diagnosis and correction of various angles that effect the way
your vehicle rolls down the road
• Every vehicle is designed to operate within specific alignment tolerances to optimize
handling and tire wear
• Alignment (angle) changes can occur over time due to wear & tear of everyday driving
• Front Wheel Drive vehicles often require both the front and rear wheels to be aligned
(4-wheel alignment) for proper handling and maximum tire wear
• Many vehicles are manufactured with no provision to adjust critical alignment angles
• Aftermarket alignment products are designed to provide adjustability of these angles
• If your vehicle is non-adjustable, one or more of the products shown on the reverse side
may be recommended for proper alignment
??? ????
55
HO
W TO
DEC
OD
E YOU
R VIN
NU
MBER
VIN DecoderHow to decode your VIN number. VIN decoding information
There are 17 numbers and letters (17 positions) in a VIN and you can divide them into three groups: World Manufacturer Identifier, Vehicle Descriptor Section, and Vehicle Identifier Section. We will go through all 17 positions here so you can decode any VIN number. You will become a VIN decoding expert!
World Manufacturer Identifier (WMI)The first three letters and numbers of the VIN are the World Manufacturer Identifier.
Position 1The very first letter or number of the VIN tells you in what region of the world your vehicle was made. Match the letter or number below to the first number or letter of your VIN to find out in what region of the world your VIN was made.
A, B, C, D, E, F, G, and H are made in AfricaJ, K, L, M, N, P, and R are made in AsiaS, T, U, V, W, X, Y, and Z are made in Europe1, 2, 3, 4, 5 are made in North America6 and 7 are made in Oceania8 and 9 are made in South America
Position 2The second letter or number, in combination with the first letter or number in the VIN, tells you in what country the car or truck was made. You may be surprised to know that not all Japanese cars are made in Japan and not all GM cars are made in America and so on. Anyway, cars and trucks are made in over 80 countries and there are over 600 VIN country codes. You can see all the codes adn find where your car or truck was made by going to Where is my car or truck made.
Position 3The third number or letter is used by the vehicle manufacturer to identify what kind of vehicle it is. It could be a car, truck, bus and so on. Each vehicle maker uses different codes for this so go to the Automobile Manufacturer website for your vehicle to find out what the third position in the VIN means for your particular vehicle.
Vehicle Descriptor Section (VDS)Letters and numbers in positions 4 through 9 is the Vehicle Descriptor Section. This information gives detailed information about the vehicle itself.
Positions 4 5 6 7 8 Here you can find out the vehicle model, engine type, body style and things like that. Each vehivle maker uses different codes for this so go to the Automobile Manufacturer for your vehicle to get the codes.
Position 9This is the VIN Check Digit where you can use math to figure out if it is a correct VIN. It does not tell you anything about the vehicle itself.
Vehicle Identifier Section (VIS)Letters and numbers 10 through 17 is the Vehicle Descriptor Section. This gives you information such as when it was produced, what options it comes with and so on.
Position 10The 10th letter or number of the VIN tells you the model year of the vehicle. Note that this may be different from when it was manufactured, as many automobile manufacturers start to produce next years model this year. Find the model year by matching the 10th digit of your VIN to the table below:
A=1980B=1981C=1982D=1983E=1984F=1985G=1986H=1987J=1988K=1989L=1990M=1991N=1992P=1993R=1994
As you can see, each letter or number has been assigned to two different years. To find out which one applies to your VIN, you must look at the 7th letter or number in your VIN. If the 7th VIN position is a letter, then your vehicle is made in 2010 through 2039. If the 7th VIN is a number, then your vehicle is made prior to 2010.
Positions 11 12 13 14 15 16 17This is where the auto manufacturers enter unique information about the particular vehicle the VIN belongs to. The name of the assembly plant, extra options added to the vehicle, Production Sequence Number and things of that nature. This is different from company to company, so to find more details about this go to the Automobile Manufacturer website for your vehicle.
PS. A lot of vehicle information is also available on the Window Sticker. If you have the VIN number, you can find the window sticker by using Research Maniacs VIN lookup.
A=2010B=2011C=2012D=2013E=2014F=2015G=2016H=2017J=2018K=2019L=2020M=2021N=2022P=2023R=2024
S=1995T=1996V=1997W=1998X=1999Y=20001=20012=20023=20034=20045=20056=20067=20078=20089=2009
S=2025T=2026V=2027W=2028X=2029Y=20301=20312=20323=20334=20345=20356=20367=20378=20389=2039
56
See Application Guide, pages 8-52, for specific models and years
F
RON
T W
HEE
L CAMBER ADJUSTING “MAGNA CAM” BOLT KITSThe fast and easy alternative to adjust camber on vehicles utilizing standard 2-bolt (upper and lower) strut-to-knuckle mounting bolt design. This unique design incorporates an offset internal sleeve working in conjunction with a full-size, high-strength OE-diameter bolt (with matching internal offset), which allows camber to be increased or decreased by a simple turn of the bolt. Magna Cam allows the technician to accurately adjustcamber with weight of vehicle on front wheels.
Adjustment Range: ±1.75°Quantity: PairSides Adjusted: 2
12mm 12.9 High-Strength Bolts41-144 Aveo, Alero, Cutlass, Grand Am
41-146 Ford, Hyundai, Mazda
41-147 Chevrolet, Dodge, Ford, Hyundai, Isuzu, Mazda, Mercury, Mitsubishi, Nissan, Plymouth, Pontiac, Porsche, Saab, Subaru, Toyota, Volkswagen
15mm 10.9 High-Strength Bolts Lexus, Toyota w/15mm strut mount bolts
17mm 10.9 High-Strength Bolts Lexus, Toyota
14mm 12.9 High-Strength Bolts
Chrysler, Dodge, Plymouth vans and mid-size vehicles
Buick, Chevrolet, Infiniti, Oldsmobile, Pontiac, Saturn, Subaru, Volvo
16mm 10.9 High-Strength Bolts
Chrysler, Mitsubishi, Honda, Acura
16mm 10.9 High-Strength Bolts
Buick, Cadillac, Chevrolet, Chrysler, Dodge, Oldsmobile, Pontiac
41-140AMAGNA CAM BOLT ASSORTMENT Consists 2 each of the following :41-147,41-149, 41-151, 41-157, 41-158, 41-160
41-149
41-151
41-157
41-158
41-159
41-160
57Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
FRO
NT W
HEEL
Make camber adjustment easy & economical!
Front Part #CAMEROCRUZECAPTIVAIMPALAEQUINOXMALIBUMALIBUSONICSPARKTRAVERSEVOLTLACROSSELACROSSEREGALVERANO200TOWN & CTRYAVENGERCALIBERPATRIOTFIESTAMUSTANGEDGEESCAPEESCAPEFUSIONINSIGHTCR-VCR-ZELEMENTODYSSEYPILOTELANTRASANTA FESONOTAFORTEOPTIMAOPTIMARIORONDOSEDONASOULSPORTAGEESRXALTIMACUBEJUKELEAFMAXIMAMURANOVERSAFORESTERLEGACY/OUTAVALONCAMRYCOROLLAHIGHLANDERPRIUSPRIUSRAV 4VENZAYARIS
2010-142010-152008-141999-132005-142013-152004-122012-152013-152009-152011-152010-152005-092011-152012-142011-142001-142008-142007-122007-142011-142005-142007-142001-122013-152013-152010-142007-152011-152003-112005-152009-142007-142001-152011-142009-142012-142007-112012-142007-122002-142009-132005-142013-141999-152002-142009-142011-142011-141995-142003-142007-142009-151990-151995-141992-142009-142008-132001-092010-142006-142009-142007-14
46-18246-710044-77541-21444-775OEMA46-425N/AOEMA46-42146-7100OEMA 41-214OEMA46-710046-217646-1120 (TOE)46-217546-217846-2178N/AN/AOEMA46-217946-218846-2227N/A46-2186N/A
46-219146-219646-2189OEMOEM46-2400N/A674107580067410N/AN/A
41-217
46-219946-2400N/A46-1120
46-240046-217746-217741-21541-215
41-2177560046-2400N/A41-21746-1500
Model YearRear Part # MakeCHEVROLETCHEVROLETCHEVROLETCHEVROLETCHEVROLETCHEVROLETCHEVROLETCHEVROLETCHEVROLETCHEVROLETCHEVROLETBUICKBUICKBUICKBUICKCHRYSLERCHRYSLERDODGEDODGEJEEPFORDFORDFORDFORDFORDFORDHONDAHONDAHONDAHONDAHONDAHONDAHYUNDAIHYUNDAIHYUNDAIKIAKIAKIAKIAKIAKIAKIAKIALEXUSLEXUSNISSANNISSANNISSANNISSANNISSANNISSANNISSANSUBARUSUBARUTOYOTATOYOTATOYOTATOYOTATOYOTATOYOTATOYOTATOYOTATOYOTA
41-21641-21241-21441-21441-21441-21241-21241-21441-21241-21641-21241-21241-21241-21241-21441-21441-21441-21441-21441-21441-21241-21441-21641-21241-21441-21641-21441-21441-21441-21641-21641-21741-21441-21441-21641-21441-21641-21441-21441-21441-21441-21441-21441-21741-21741-21441-21441-21441-21441-21441-21441-21441-21441-21441-21741-21741-21641-21741-21541-21741-21741-21741-215
• 5 part numbers cover hundreds of makes / models
• Simply replace top bolt of any 2-bolt strut system
• Forged for super durability
• Labeled with a (+) and (-) for simple orientation
• Make EVERY customers 2-bolt strut vehicle adjustable for future alignments
“AXIS” SPEED-CAM CAMBER BOLTS
Future Adjustability!Saves Time!Stop Slotting Struts!
58
See Application Guide, pages 8-52, for specific models and years
F
RON
T W
HEE
L
The perfect solution for lowered vehicles with extreme camber correction needs.
Fast: Simply replace BOTH strut mounting bolts with Magna Cams and adjust
Easy: No cutting, drilling or modifications of any kind
Economical: Easy installtion saves time and money
Accurate: Camber can be adjusted to exact specifications (while weight is on front wheels) with the turn of a wrench
Versatile: Fits either right or left side, front or rear of vehicles
12mm 17mm
12mm 14mm
12mm 14mm
15mm 16mm
41-1450
41-1460
41-1470
41-1490
41-1510
41-1570
41-1580
41-1590
Adjustment Range: ±2.5°Quantity: 4Sides Adjusted: 2
MAGNA CAM DOUBLE ECCENTRIC BOLT McPHEARSON STRUT SUSPENSION
41-210AAXIS CAM BOLT ASSORTMENT Consists of the following:
41-212, 41-214 Quantity of 4
41-215, 41-217, 41-216 Quanity of 2
• Kit contains bolts for 28 wheel installations• Assortment includes 14 kits & chart• Saves time!• Future adjustability!• Stop slotting struts!
FOR UP-TO-THE- MINUTE PRODUCT
APPLICATIONSCHECK OUT:
WWW.STEMPF.COMAND
STEMPFONLINE.COM!
59Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
FRO
NT W
HEEL41-545
Acura: Integra 1990-2001 Vigor 1992-1994 CL 1997-1999 RL 1996-2008 TL 1995-1998
Honda: Accord 1990-1997 Civic 1988-1995 CRX 1988-1991 Del Sol 1993-1997 Prelude 1992-1996 Odyssey 1995-1998
Adjustment Range: +1.75°Quantity: pairsSides Adjusted: 1
ADJUSTABLE CAMBER FRONT CONTROL ARM MOUNTS WITH RUBBER BUSHING
• Unique design allows fast and easy “on vehicle” adjustments• Works with OE bolt system. No cutting, drilling or modification of any kind• Bolt head marked + and - for easy orientation• Made from grade 12.9 high-strength steel• Makes vehicle permanently adjustable for camber
Fiat 500: 2012-2013Also fits additional vehicles with 10mm strut to knuckle mounting bolts
Adjustment Range: ±1.75° CamberQuanity: 2Sides Adjusted: 2
10mm CAMBER ADJUSTMENT “AXIS-CAM” CAM BOLT
41-210
FRONT CAMBER SHIM SERIES 45-7010
45-701345-701545-701745-7019
1/64”1/32”1/16”1/8”
Contains 1 shim and mounting hardware. requires no hardware45-7013
45-7010A ASSORTMENT (2 each side)
Buick Regal 1988-1996Chevrolet Lumina 1990-2001Chevrolet Monte Carlo 1995-1999Pontiac Grand Prix 1988-1996Oldsmobile Cutlss Supreme 1988-1997
Quantity: EachSides Adjusted: 1
For W body vehicles with 10.5 rotors with or without ABS brake systems.
60
See Application Guide, pages 8-52, for specific models and years
FRO
NT
WH
EEL
CAMBER/CASTER ADJUSTABLE BALL JOINTS
#88-1304
Quantity: 1Sides Adjusted: 1
Part Number Make/Model Range
41-229
41-230
41-232
41-236
Chrysler Cirrus and Sebring Convertible 1995-2010
Dodge Stratus 1995-2006Plymouth Breeze 1996-2000
Dodge Magnum 20005-2014Dodge Charger 2006-2014Dodge Challenger 4x2 2005-2014Chrysler 300C 4x2 2005-20014
Ford Fusion 2006 -2012Mazda 6 Sedan 2003-2014Lincoln Zephyr/MKZ 2006-2012Mercury Milan 2006-2010
±.5°
±1°
±.75°
±1°
Upper
Upper
Upper
Lower
These ball joints provide a fast, easy and adjustable solution to the problem of non-adjustable front suspensions found on many of today’s most popular vehicles.
• Unique design allows fast and easy “on-vehicle” replacement• Future adjustments are easily made• Adjustable offset design means fewer part numbers per application.
See page 125 for adjusting wrench
CAMBER/CASTER ADJUSTABLE UPPER BALL JOINTThese ball joints provide a fast, easy and adjustable solution to the problem of non-adjustable front suspensions found on many of today’s most popular vehicles. • Unique design allows fast and easy “on-vehicle” replacement• Future adjustments are easily made• Adjustable offset design means fewer part numbers per application.
See page 125 for adjusting wrench #88-1304
±1.0°
±.5°
Part Number Make/Model Range
41-529
41-530
41-550
41-532
41-531 ±1.0°
Mitsubishi Eclipse (FWD,AWD), Galant, Chrylser Sebring Coupe, Hyundai Sonata,Dodge Avenger (FWD,AWD),Eagle Talon (FWD,AWD)
Honda/Acura Many Models, Seeapplication guide, pages 8-52for specific vehicles
Honda/Acura Many Models, Seeapplication guide, pages 8-52for specific vehicles
Quantity: 1Sides Adjusted: 1
61Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
FRON
T WH
EEL
Adjustment Range: ±2.5°Quantity: Pair Sides Adjusted: 2
FRONT CAMBER ADJUSTING CAM BOLT
41-8243
CHRYSLER/FORD
Chevrolet Corvette 1963-1982Dodge B100/200/300/500 1979-1983Dodge Dart 1965-1976Dodge Ramcharger 1977-1993Ford Granada 1975-1980Lincoln Versailles 1977-1980Plymouth Trailduster 1977-1981
Adjustment Range: ±1.5° Camber ±2° Caster Quantity: 4Sides Adjusted: 2
41-8244FRONT CAMBER ADJUSTING CAM BOLT
LINCOLN/JAGUAR
Ford Thunderbird 2002-2005Jaguar S 2000-2008Lincoln LS 2000-2006
Adjustment Range: ±2.25°Quantity: Pair Sides Adjusted: 2
41-8245FRONT CAMBER
ADJUSTING CAM BOLT Mid-size Buick, Chevrolet, Oldsmobile, Pontiac
41-8246GM S-10 and S-15 Pickup, Jimmy and Blazer
41-8247Riviera, Toronado, Eldorado and Seville
46-143ADJUSTABLE FRONT CAMBER CAM BOLT KIT • Provides camber adjustments to correct sagging suspension. • Designed to provide additional adjustment beyond that available from OE.
Adjustment Range: ±2.5°Quantity: Kit Sides Adjusted: 1
Mercury Grand Marquis 2003-2011Ford Crown Victoria 2003-2011Lincoln Town Car 2003-2011
62
See Application Guide, pages 8-52, for specific models and years
FRO
NT
WH
EEL
CASTER ADJUSTING CAM BOLT KIT Ford Mustang 2005-2014
• Allows caster adjustment for non-adjustable OEM design• No modification necessary • Quick and easy replacement of OE bolts
Adjustment Range: ±.5° CasterQuantity: PairSides Adjusted: 2
41-325 41-326CAMBER/CASTER ADJUSTING CAM BOLT KIT Ford Mustang 2005-2014
• Allows camber and/or caster adjustment for non-adjustable OEM design • Quick and easy replacement of OE bolts• Combination of two 41-325 cam bolts and two 14mm “Axis-Cam” cam bolts
Adjustment Range: ±1.5°Camber, ±.5°Caster Quantity: Pair Sides Adjusted: 2
DOMESTIC/IMPORT CAR CAMBER WEDGE KIT
These kits are a real time-saver when additional camber is needed on vehicles with two bolt strut flange mounting.
41-300
Adjustment Range: +2°Quantity: PairSides Adjusted: 2
Vehicles with 14mm strut-to-knuckle mounting bolts
Vehicles with 16mm strut-to-knuckle mounting bolts
Vehicles with 12mm strut-to-knuckle mounting bolts
Adjustment Range: +2°Quantity: PairSides Adjusted: 2
41-301
41-305
41-312
63Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
FRON
T WH
EEL
There are many instances where the factory camber adjustment does not give enoughpositive camber change. This kit can be used by itself or with the factory adjustment.
FORD ESCAPE FRONT CAMBER ADJUSTING WEDGE KIT
Ford Escape 2001-2012Mazda Tribute 2001-2011
MUSTANG FRONT CAMBER ADJUSTING WEDGE KIT
FORD MUSTANG2005-2014
FORD/LINCOLN FRONT CAMBER ADJUSTING WEDGE KIT
Ford Fairmont 1978-1981Ford Granada 1981-1982Ford Thunderbird 1980-1988Lincoln Continental 1982-1987Lincoln Mark VII 1984-1992
Adjustment Range: +1.5°Quantity: PairSides Adjusted: 2
Adjustment Range: +1.5°Quantity: PairSides Adjusted: 2
Adjustment Range: +1.5°Quantity: KitSides Adjusted: 2
Adjustment Range: +2°Quantity: PairSides Adjusted: 2
41-307 41-308
41-310 41-314
FORD MUSTANG FRONT CAMBER ADJUSTING WEDGE KIT 1979-2004
64
See Application Guide, pages 8-52, for specific models and years
FRO
NT
WH
EEL
41-4601
Adjustment Range: +2.5°Quantity: Pair Sides Adjusted: 2
Ford Escort 1986-1990Ford EXP 1986-1988Ford Tempo 1984-1994Ford Tempo AWD 1987-1992Mercury Lynx 1986-1987Mercury Topaz 1984-1994
This kit features fully rotatable discs that are housed in a specially designed upper mounted strut plate. Rotation of these discs allows controlled adjustment of a wide range of caster, camber or combination.
ADJUSTABLE CAMBER/CASTER CORRECTION KIT 41-4603
Taurus/Sable up to 1990
41-4605Taurus/Sable 1991 to 1995US Patent # 4,946,188
Adjustment Range: +1.25°Quantity: Pair Sides Adjusted: 2
This kit allows accurate adjustments in .25° increments, installs in just minutes, is adjustable for future alignments, helps restore original ride height, and can be used on either side of vehicle.
Adjustment Range: +1°Quantity: PairSides Adjusted: 2
41-4607
Taurus/Sable 1996-2005
41-4609Ford Windstar 1995-2003Ford Freestar 2004-2007Mercury Mountaineer 2004-2007
US Patent # 6,257,601
• Accurate adjustment in .25° increments — no guesswork• Installs in minutes• Adjustable for future alignments
Adjustment Range: +1°Quantity: PairSides Adjusted: 2
41-4611
Ford Focus 2000-2014Ford Transit Connect 2010-2014US Patent # 6,257,601
ADJUSTABLE FRONT CAMBER/CASTER CORRECTION KIT
ADJUSTABLE FRONT CAMBER CORRECTION
KIT
ADJUSTABLE FRONT CAMBER CORRECTION
KIT
65Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
FRON
T WH
EEL66045
CHRYSLER/DODGE ARM
Front Adjustment Range: ±2.0° Camber ±1.5° CasterInstallation time: .6 hr/sideRequired: 1 per wheel
46-2175 46-2176ADJUSTABLE REAR CAMBER ARM
Chrysler Sebring 2007-2010Dodge Journey 2009-2012Dodge Avenger 2008-2010
Adjustment Range: +2.5° Quantity: EachSides Adjusted: 1
Chrysler 200 2011-2014Dodge Avenger 2011-2014
ADJUSTABLE REAR CAMBER ARM
Adjustment Range: ±4° Quantity: EachSides Adjusted: 1
•Allows for rear positive or negative camber adjustment where no OE adjustments are available• Hexed turnbuckle design for fast and easy adjustments• Includes OE style bushings
•Allows for rear positive or negative camber adjustment where no OE adjustments are available• Hexed turnbuckle design for fast and easy adjustments• Includes OE style bushings
UPPER CONTROL ARM WITH ADJUSTABLE CAMBER/CASTER BALL JOINTS
41-8321L (LEFT SIDE)
• Quick and easy replacement of OE control arm • Greaseable ball joint design for extended durability • Adjustable ball joint allows for continuous future adjustments • OE style Control Arm
Chrysler 300C 2005-2008Dodge Challenger 2008Dodge Charger 2006-2008Dodge Magnum 2005-20082 W/D ONLY
Adjustment Range: ±3° Camber, ±1.5° CasterQuantity: Each Sides Adjusted: 1
41-8321R (RIGHT SIDE)This adjustable front control arm fits these popular Dodge and Chrysler vehicles and provides both camber and caster changes. Easy to install and even easier to adjust this is the perfect kit for standard alignment issues as well as special suspension tuning problems that occur when you lower these vehicles for performance or appearance. Our tubular design incorporates our low profile adjustable ball joint.
Chrysler 300C RWD 2009 & UpDodge Challenger 2009 & UpDodge Charger 2009 & Up
Note: NOT for AWD vehicles.
66
See Application Guide, pages 8-52, for specific models and years
FRO
NT
WH
EEL
45-100 45-200
45-300 SA600
45-500
45-10145-10245-10345-104
1/64”1/32”1/16”1/8”
45-20145-20245-20345-204
1/64”1/32”1/16”1/8”
45-30145-30245-30345-304
1/64”1/32”1/16”1/8”
45-50145-50245-50345-504
1/64”1/32”1/16”1/8”
100 pieces per package
100 pieces per package
100 pieces per package 100 pieces per package
US SERIES CAMBER/CASTER SHIMUS SERIES CAMBER/CASTER SHIM
X SERIES CAMBER/CASTER SHIM
N SERIES CAMBER/CASTER SHIM
Universal shim covers a range of bolt sizes up to 5/8” diameter
Buick CadillacOldsmobile
Chevrolet 1/2 ton TruckGMC 1/2 ton Truck Ford passenger cars
CASTER / CAMBER ASSORTMENT
Late model RWD Gereral Motors
45-600
45-60145-60245-60345-604
1/64”1/32”1/16”1/8”
100 pieces per package
CC SERIES CAMBER/CASTER SHIMChevrolet 3/4 and 1 ton Truck GMC 3/4 and 1 ton Truck
50 each of the 1/32”, 1/16” and 1/8” thickness shims from the “N”, “US”, “CC” & “CT” Series. Total of 600 shims packaged in a metal storage case.
67Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
FRON
T WH
EEL45-6001
45-6002
CASTER ADJUSTMENT SPACERS For Toyota models with stabilizer bushings at lower control arm
1/16”
1/8”
12 Per Box
CASTER ADJUSTMENT SPACERS
Acura CL Series 1996-1999Acura TL Series 1996-2003Accura Vigor 1992-2007Honda Accord 1990-2007Honda Odyssey 1990-2007Isuzu Oasis 1996-1999
45-6005 1/16”
45-6006 1/8”
Quantity: 12
45-600
45-60145-60245-60345-604
1/64”1/32”1/16”1/8”
100 pieces per package
CC SERIES CAMBER/CASTER SHIM
Chevrolet 3/4 and 1 ton Truck GMC 3/4 and 1 ton Truck
FOR UP-TO-THE-MINUTE PRODUCTAPPLICATIONS CHECK OUT:
WWW.STEMPF.COM & STEMPFONLINE.COM!
68
See Application Guide, pages 8-52, for specific models and years
REA
R W
HEE
L46-162
46-182 46-201
ADJUSTABLE REAR CAMBER BUSHINGS
• Allows for rear positive or negative adjustments • Designed to provide adjustment where no OE adjustment is available.
Adjustment Range: ±1.5°Quantity: 4 Sides Adjusted: 2
Chrysler 300 2005-2014Dodge Magnum 2005-2008Dodge Charger 2006-2014
ADJUSTABLE REAR CAMBER/TOE CAM BOLT
• Allows for additional camber and toe change from what OE bolts provide• No modification necessary• Quick and easy replacement of OE bolts
Adjustment Range: Camber ±1°Quantity: Pair Toe ±2°Sides Adjusted: 2
Chevrolet Camaro 2010-2014Chevrolet Caprice 2012-2014Pontiac G8 2008-2009
FRONT CAMBER ADJUSTMENT WEDGE KIT
• Also allows adjustment on future alignments.
Adjustment Range: 2.5°Quantity: Kit Sides Adjusted: 2
Ford Escort 1981-1996Ford EXP 1982-1988Ford Tempo 1984-1994Ford Tempo AWD 1987-1992Mercury LN7 1982-1983Mercury Lynx 1981-1994
46-143ADJUSTABLE FRONT CAMBER CAM BOLT KIT • Provides camber adjustments to correct sagging suspension. • Designed to provide additional adjustment beyond that available from OE.
Adjustment Range: ±2.5°Quantity: Kit Sides Adjusted: 1
Mercury Grand Marquis 2003-2011Ford Crown Victoria 2003-2011Lincoln Town Car 2003-2011
69Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
R
EAR
WH
EEL46-205
REAR TOE ADJUSTMENT BUSHING KIT
Designed to replace factory non-adjustable bushing on left rear stabilizer arm. Factory provides toe adjustment on right rear only.
Adjustment Range: 2° (1”)Quantity: Kit Sides Adjusted: 1
Ford Escort 1991-2002Mercury Capri 1991-1994Mercury Tracer 1987-1995
46-406REAR TOE ADJUSTMENT KIT
Unique external cam plate design easily attaches to vehicle, allowing a full range of positive or negative rear toe adjustment.
Saturn All Models 1991-1998Saturn S Series 1991-2002
Adjustment Range: 2° (1”)Quantity: Each Sides Adjusted: 1
46-421REAR LINK INBOARD SEALED FLEX JOINT REPLACEMENT BUSHING WITH CAMBER CAM BOLTS
• These sealed flex joint bushings replace commonly corroded and seized OEM bushings• Replacement camber adjusting cam bolts also provided. • Exact OEM replacement
Adjustment Range: Camber ±1.5°Quantity: Kit Sides Adjusted: 2
Buick Enclave 2008-2014Chevrolet Traverse 2008-2014GMC Acadia 2007-2014Saturn Outlook 2007-2010
70
See Application Guide, pages 8-52, for specific models and years
REA
R W
HEE
L
46-2001 46-131REAR CAMBER/TOE BUSHING
Tool No is required for proper positioning ofbushing.
88-1302
Ford Taurus Sedan 1986-2004Lincoln Continental 1988-1994Mercury Sable Sedan 1986-2005
Adjustment Range: Camber 2°Quantity: Pair Toe 1.5° (3/4”)Sides Adjusted: 2
46-132 46-133REAR CAMBER ADJUSTING CAM BOLT REAR TOE ADJUSTING KIT
Lincoln Continental 1988-1994Ford Taurus Sedan 1986-1995Mercury Sable Sedan 1986-1995
Adjustment Range: 2.25°Quantity: Pair Sides Adjusted: 2
Adjustable rear toe bushing kit with eccentric adjusting cam replaces the “frozen” factory toe units on Taurus and Sable station wagons. This kit is easy to install and does not require “frozen” spindle bolt to be removed. Ford Tauras Wagon 1986-1995Mercury Sable Wagon 1986-1995
Adjustment Range: Toe 1.5°(3/4”) Quantity: Kit Sides Adjusted: 2
“LH” MODEL REPLACEMENT SLEEVE DODGE/CHRYSLER 1998-2004
This adjustable sleeve is designed to replace the knurled adjusting sleeve, and can be adjusted with a hex wrench. The sleeve is recommended when the existing sleeve has been damaged or if the tie rod end is being replaced, so adjustments can be made more easily.
Quantity: Each Sides Adjusted: 1
71Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
REA
R W
HEEL
46-134 46-135ADJUSTABLE REAR CAMBER/TOE KIT
• Easy adjustment of rear camber on factory non-adjustable vehicles • Provides rear toe adjustment when factory adjusters are frozen • Retains original ride and handling characteristics
Ford Taurus Sedan 1996-2004Mercury Sable Sedan 1996-2005
Adjustment Range: Camber/Toe 2° (3/4”)Quantity: Kit Sides Adjusted: 2
Ford Freestyle 4x2 2005-2008Taurus X 2009-2010Taurus 4x2 2009-2010Ford Five Hundred 4x2 2005-2008
• Designed to provide camber adjustment where no factory adjustment is available• Quick and easy installation
Adjustment Range: +1.5°Quantity: Kit Sides Adjusted: 2
46-136 46-141ADJUSTING REAR CAMBER CAM BOLT
• Allows accurate camber adjustment to correct rear tire wear problems.• Quick and easy installation
Ford Taurus Wagon 1986-2004Mercury Sable Wagon 1986-2005
Adjustment Range: 2.5°Quantity: Pair Sides Adjusted: 2
Provides camber and toe adjustment on vehicles with frozen OE bolts, or where additional change is needed.
Adjustment Range: ±3°Quantity: Kit Sides Adjusted: 2
Infinity G37 2008-2012Infiniti G35 2006-2008Nissan 370 Z 2009-2012
ADJUSTABLE REAR CAMBER CAM BOLT
ADJUSTABLE REAR CAMBER/TOE CAM BOLT
72
See Application Guide, pages 8-52, for specific models and years
REA
R W
HEE
LSYSTEM 2000 UNIVERSAL REAR FULL CONTACT/TOE SHIM
Adjustment Range: 0° to 1.5°Quantity: EachSides Adjusted: 1
EXACT FIT System 2000’s four part numbers provide a precision fit for all application. No modification of outer perimeter is required, as is the case with other shim designs. A perfect alignment with full spindle support.
SIMPLICITY Just set the System 2000 shim on the template, dial in the predeterminednumbers from the chart, and create the exact shim angle needed to precisely align thevehicle. Break out tabs as shown and install.
46-2100Audi, Chrysler, Dodge, Eagle, Geo, Isuzu, Plymouth, Pontiac, Volkswagen
46-2200Audi, Plymouth, Chrysler, Dodge, Honda, Mercury
46-2300Acura, Buick, Cadillac, Chevrolet, Geo, Oldsmobile, Pontiac, Toyota
46-2400Buick, Cadillac,Chevrolet, Oldsmobile, Pontiac, Toyota
Blue
White
Gray
Burgandy
46-2160
XTRA RANGE REAR CAMBER SHIM KIT Acura 2.2CL,2.3CL,3.0CL 1997-2003Acura Integra 1990-2001Acura Legend 1991-1995 Honda Accord 1986-1989Honda Civic 1992-2000Isuzu Oasis 1996-1999
2 each 1/16” shim = .20° possible change2 each 1/8” shim = .40° possible change2 each Extended bolt
Adjustment Range: Up To 1.25°Quantity: EachSides Adjusted: 1
46-2170XTRA RANGE REAR CAMBER SHIM KIT
Chrysler Sebring Coupe 1995-2000Chrysler Sebring Coupe 2001-2010Dodge Avenger 1995-2000Dodge Stratus Coupe 1995-2000Dodge Stratus Coupe 2001-2005
4 each 1/16” shim = .20° possible change4 each 1/8” shim = .40° possible change4 each Extended bolts
Adjustment Range: Up To +1.25°Quantity: EachSides Adjusted: 1
73Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
REA
R W
HEEL
46-916GM REAR SPINDLE (HUB AND BEARING) REPLACEMENT SOCKET HEAD CAP SCREWS
These high-strength socket head cap screws are 5 mm longer than the torx bolt they replace. Ideal for rear shim installation.
Quantity: 16
46-1000 Series
REAR FULL CONTACT CAMBER/TOE SHIM (BLUE)
46-100146-100246-100346-100446-100546-1006
46-1000A
.25°
.5°
.75°1°1.25°1.5°Assortment - 2 each size
46-1030COATED INDEXING WALL CHART
For proper indexing of rear shim to achieve exact positioning
46-1035
PAINT STICK For marking shim tabs to be removed for proper mounting
• Audi 80• Audi 90• Chevrolet Spectrum• Chrysler Dynasty• Chrysler E Class
46-425
AX² DUAL AXIS REAR CAMBER CAM BOLT SYSTEM
• Extends factory adjustments • Simple to install • Replaces factory rear cam bolt system • Vehicle rear camber can be re-adjusted if needed• Made of 12.9 high strength steel
Adjustment Range: Camber ±2°Quantity: EachSides Adjusted: 1
Chevrolet Malibu 2005-2009Pontiac G6 2005-2009Saab 9-3 2003-2012Saturn Aura 2007-2011
PATENT PENDING
74
See Application Guide, pages 8-52, for specific models and years
REA
R W
HEE
L
46-1200 SeriesREAR FULL CONTACT CAMBER/TOE SHIM (GREY)
46-120145-120246-120346-120446-120546-1206
46-1200A
.25°
.5°
.75°1°1.25°1.5°Assortment - 2 each size
46-1120 SeriesREAR FULL CONTACT CAMBER/TOE SHIM (GREEN)
46-112146-112246-112346-1124
46-1120A
.25°
.5°
.75°1°Assortment - 2 each size
46-1300 Series
46-130145-130246-130346-130446-130546-1306
46-1300A
.25°
.5°
.75°1°1.25°1.5°Assortment - 2 each size
REAR FULL CONTACT CAMBER/TOE SHIM (BURGUNDY)
• Acura Integra• Buick Skyhawk• Buick Somerset• Cadilac Cimarron
• Buick Century• Buick LeSabre• Buick Lucerne • Buick Rendezvous
• Chrysler Town&Country Van• Chrysler Voyager Van • Dodge Caravan• Nissan Leaf• Nissan Sentra
46-1100 Series
46-110146-110246-110346-110446-110546-1106
46-1100A
.25°
.5°
.75°1°1.25°1.5°Assortment - 2 each size
REAR FULL CONTACT CAMBER/TOE SHIM (WHITE)
• Audi 100/200• Audi 5000• Chevrolet Aveo• Chrysler Town/City Van• Dodeg Caravan
75Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
REA
R W
HEEL
46-1600 SeriesGM E & K BODY REAR CAMBER SHIM
Allows for either positive or negative camber adjustment, while keeping the caliper in exact alignment ith the rotor.
46-160146-160246-160346-1604
.25°
.5°
.75°1°
Quantity: Each Sides Adjusted: 1
46-1520 SeriesREAR FULL CONTACT CAMBER/TOE SHIM (BROWN)
46-152146-152246-152346-1524
46-1520A
.25°
.5°
.75°1°Assortment - 2 each size
46-1500 SeriesREAR FULL CONTACT CAMBER/TOE SHIM (BLACK)
46-150146-150246-150346-1504
46-1500A
.25°
.5°
.75°1°Assortment - 2 each size
Buick Riviera 1985-1993Cadillac Allante 1987-1992Cadillac Eldorado 1986-1992Cadillac Seville 1986-1992Oldsmobile Toronado 1986-1992
• Chrysler 200• Honda Fit• Hyundai Accent• Kia Forte• Kia Soul
• Chevrolet Cobalt• Chevrolet HHR• Chevrolet Malibu• Pontiac G5• Pontiac G6
76
See Application Guide, pages 8-52, for specific models and years
REA
R W
HEE
L46-2450A
46-2000
REAR DISC BRAKE CALIPER SPACER - ASSORTMENT
Individual sizes available separately46-245446-2456
.04 Thickness (pkg of 12)
.06 Thickness (pkg of 12)
REAR CAMBER/TOE STEEL HALF SHIMSThese close-tolerance half shims are the ideal low cost alternative to full contact dual angle rear shims when only one angle needs correction.
• Most economical to use • Accurately adjusts camber or toe• Stackable• Available in four thicknesses .010”, .020”, .030”• 12 per package
46-201046-201546-202046-2030
Part Camber Toe 1/4°3/8°1/2°3/4°
1/16”3/32”1/8”3/16”
46-300046-301046-301546-302046-3030
Part Camber Toe 1/4°3/8°1/2°3/4°
1/16”3/32”1/8”3/16”
46-4000 46-500046-401046-401546-402046-4030
Part Camber Toe 1/4°3/8°1/2°3/4°
1/16”3/32”1/8”3/16”
46-501046-501546-502046-5030
Part Camber Toe 1/4°3/8°1/2°3/4°
1/16”3/32”1/8”3/16”
46-400AAssortment Contains:12 each
• Unique snap-together design allows required thickness to be created by interlocking as many or as few spacers as needed.• Two different thicknesses available - and can be combined. • Special “finger tab” makes installation quick and easy!• 24 per assortment (12 of each size)
When installing rear camber/toe shims, many rear disc brake systems require the caliper to be shimmed to match the angle of the rotor . In most instances, this angle can be achieved by using Northstar Manufacturing’s new “Stackable/Interlocking” caliper spacers.
77Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
REA
R W
HEEL
46-602046-603046-6040
1/32”1/16”1/8”
REAR SUSPENSION SHIM
Corvette 1963-1982
REAR CAMBER/TOE SHIM PACK SHIM PACK ASSORMENT
Assortment contains 12 of each size
46-7100A
46-711046-711546-712046-7130
.010”
.015”
.020”
.030”
12121212
Thickness Qty
Chevrolet Cruze 2011-2013Chevrolet Spark 2011-2014Chevrolet Aveo 2012-2014Chevrolet Sonio 2014-2014
REAR CAMBER/TOE STEEL HALF SHIM
• Accurately adjust camber and or toe angles• Stackable • Available in 4 thicknesses:
46-7300 Series
46-731046-731546-732046-7330
.010”
.015”
.020”
.030”
12121212
Thickness Qty
Fiat 500 2012-2014Fiat 500L 2012-2014
78
See Application Guide, pages 8-52, for specific models and years
REA
R W
HEE
L46-2178
46-2179 46-2180
Allows for positive or negative rear camber and/or toe adjustment where no OE adjustments are available.
ADJUSTABLE REAR GREASABLECAMBER ARM
Ford Escape FWD/AWD 2001-2012Mazda Tribute FWD/AWD 2009-2012
ADJUSTABLE REAR CAMBER ARM
• Comes with durable OE-style bushings• Makes non-adjustable vehicles fully adjustable for rear camber• Unique design allows fast and easy “on-vehicle” replacement
Dodge Caliber 2007-2012Jeep Compass 2007-2014Jeep Patriot 2007-2014
Adjustment Range: ±2° Quantity: KitSides Adjusted: 1
Adjustment Range: -2° to+3° Quantity: EachSides Adjusted: 1
ADJUSTABLE REAR CAMBER ARM
• Ideal for lowered vehicles• Includes OEM-style rubber bushings for a quiet ride• Replaces non-adjustable OEM suspension arms
46-2177ADJUSTABLE REAR TOE ARM
Allows for positive or negative rear toe adjustment where no OE adjustments are available.
Subaru Impreza 2008-2014Subaru Forester 2009-2014
• Greasable
Adjustment Range: ±3° Quantity: KitSides Adjusted: 1
• Greasable design to extend tie rod life• Hex turnbuckle design for fst and easy adjustments • Includes OE style bushing Acura RSX 2002-2006
Honda Civic 2001-2005Honda Civic Sl 2002-2005
Adjustment Range: ±2° Quantity: KitSides Adjusted: 1
79Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
REA
R W
HEEL
46-2185ADJUSTABLE REAR CAMBER LINK
Allows for positive or negative camber adjustment where no OE adjustments are available.
Honda CRV 2001-2006Honda Element 2003-2011
Adjustment Range: -2° to +3°Quantity: EachSides Adjusted: 1
46-2184ADJUSTABLE REAR CAMBER ARM
Allows for positive or negative rear camber adjustment where no OE adjustments are available.
Adjustment Range: ±1° Quantity: EachSides Adjusted: 1
Honda Accord 2008-2014
46-2181 46-2182ADJUSTABLE REAR CAMBER ARM ADJUSTABLE REAR GREASABLE
CAMBER ARM • Quick and easy replacement of non-adjustable OEM arm• Turnbuckle design allows accurate controlled adjustments • Allows for continuous future adjustments • Greasable
Adjustment Range: -2° to +4°Quantity: EachSides Adjusted: 1
Acura 3.2CL 1998-2004Acura 3.2TL 1999-2003Acura 3.5RL 1996-2008Honda Accord 1998-2002
• Quick and easy replacement of non-adjustable OEM arm• Turnbuckle design allows accurate controlled adjustments • Allows for continuous future adjustments
Honda Civic and CRX 1988-2000Honda CRX 1988-1992Honda Del Sol 1992-1997Honda CRV 1997-2001Acura Integra 1990-2001
Adjustment Range: -2° to +5°Quantity: EachSides Adjusted: 1
80
See Application Guide, pages 8-52, for specific models and years
REA
R W
HEE
L46-2186 46-2187
46-2188
Adjustment Range: -2° to +3°Quantity: EachSides Adjusted: 1
Allows for positive or negative camber adjustment where no OE adjustments are available.
ADJUSTABLE REAR CAMBER ARM
Honda CRV 2007-2014
ADJUSTABLE REAR CAMBER ARM
ADJUSTABLE REAR CAMBER ARM
Allows for positive or negative camber adjustment where no OE adjustments are available.
Adjustment Range: -4° to +2°Quantity: EachSides Adjusted: 1
Adjustment Range: -1.5° to +3°Quantity: EachSides Adjusted: 1
This kit allows for rear camber adjustment with fast and easy on-vehicle replacement.
Honda Civic 2006-2014Honda Civic Hybird 2006-2014
Ford Focus 2000-2014Mazda 3 2004-2014Mazda 5 2006-2014Volvo C30 2008-2013Volvo S40 2005-2011Volvo V50 2005-2011
46-2189ADJUSTABLE REAR CAMBER/TOE ARM AND CAM BOLT KIT
Adjustment Range: Camber ±2°, Toe ±2°Quantity: KitSides Adjusted: 1
Allows for rear camber and toe adjustments where no OE adjustments are available.
Kia Optima 2007-2010Kia Rondo 2007-2010Hyundai Elantra 2007-2010
81Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
R
EAR
WH
EEL
46-2195ADJUSTABLE REAR CAMBER ARMS
Adjustment Range: -1.5° to +3°Quantity: PairSides Adjusted: 1
• Allows fast and easy “on vehicle” adjustment• Works with factory camber adjustment
Honda Accord 2003-2007Acura 3.2 TL 2004-2008Acura 3.5 TL 1996-2008Acura TSX 2004-2008Acura 3.5 RL 2003-2004
46-2190 46-2191
Adjustment Range: -1.5° to +3°Quantity: PairSides Adjusted: 1
REAR CAMBER ADJUSTABLE ARMS
Honda Accord 1998-2002Acura 3.2 TL 1999-2003
• Ideal for lowered or performance vehicles! • With OEM-style rubber bushings for a quiet ride• Replaces non-adjustable OEM suspension arms
Adjustment Range: -2° to +4°Quantity: EachSides Adjusted: 1
ADJUSTABLE REAR CAMBER ARM
Honda Odyssey 2005-2014
• Allows for positive or negative rear camber and/or toe adjustment where no OE adjustments are available. • Greasable design for longer life
46-2194
46-2192ADJUSTABLE REAR CAMBER ARM
• This arm allows for positive or negative rear camber adjustments• Greasable design for longer life
Honda Accord 2003-2007Honda Odyssey 1999-2004Honda Pilot 2003-2008Acura MDX 2001-2006Acura TSX 2004-2008
Honda Odyssey Touring Elite 2005-2013
• Quick and easy replacement of non-adjustable OEM arm• Turn Buckle design allows accurate controlled adjustments• Allows for continuous future adjustments• Greasable
Adjustment Range: -2° to +4°Quantity: EachSides Adjusted: 1
82
See Application Guide, pages 8-52, for specific models and years
R
EAR
WH
EEL
46-2199ADJUSTABLE REAR CAMBER/TOE ARM AND CAMBOLT KIT
Allows for positive or negative rear camber and/or toe adjustment where no OE adjustments are available.
Nissan Altima 2007-2014
Adjustment Range: Camber ±3°, Toe ±2°Quantity: KitSides Adjusted: 1
46-2196ADJUSTABLE REAR GREASABLE CAMBER ARM
• Allows for rear camber adjustments where no OE adjustments are available• Greasable design for longer life
Adjustment Range: ±2°Quantity: EachSides Adjusted: 1
Acura MDX 2007-2014Honda Pilot 2009-2014
46-2226 46-2227ADJUSTABLE REAR GREASABLE CAMBER ARM
• Quick and easy replacement of non-adjustable OEM arm• Turnbuckle design allows accurate controlled adjustments • Allows for continuous future adjustments• Greasable design for longer life
Adjustment Range: ±1.5°Quantity: EachSides Adjusted: 1
Lexus GS300/350 2006-2011Lexus lS250/350 2006-2014
ADJUSTABLE REAR CAMBER ARM • Quick and easy replacement of non-adjustable OEM arm• Turnbuckle design allows accurate controlled adjustments • Allows for continuous future adjustments• OEM style bushings
Ford Fusion 2013-2014Lincoln MXZ 2013-2014
Adjustment Range: -1.5° to +5°Quantity: EachSides Adjusted: 1
83Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
LIGH
T TRUC
K
44-2730
44-5000 Series
• Quick and easy replacement of OE control arm • Greasable ball joint design for extended durability • Adjustable ball joint allows for continuous future adjustments • OE style control arm • Fits both Left and Right sides of vehicle
UPPER CONTROL ARM WITH ADJUSTABLE CAMBER/CASTER BALL JOINT
Chevrolet 1500 HD Pickups 2WD/4WD 2001-2010Chevrolet 2500/3500 Pickups/SUVs 2WD/4WD 1999-2010 GMC 1500 HD Pickups 2WD/4WD 2001-2010GMC 2500/3500 Pickups/SUVs 2WD/4WD 1999-2010
CAMBER/CASTER ADJUSTMENT BUSHINGS
Adjust Camber/Caster or a combination of both from 0° to 2.75° either positive or negative with these easy-to-adjust “Multi-slot” bushings.
Ford F150/F250 4X4 1980-1996Ford F350 4X4 1992-2002Ford Super Duty 1998-2004Ford Excursion 4WD 2000-2004Dodge Ram 2500/3500 2WD 1994-1999Dodge Ram 2500/3500 4WD 1994-2002
44-409944-500144-500244-500344-500444-500544-500644-500744-5008
0°.25°.5°.75°1°1.25°1.5°1.75°2°
1 Per Package
44-5000A
Assortment 2 Each
44-500944-501044-5011
2.25°2.5°2.75°
Adjustment Range: ±3° Camber, ±1.5° CasterQuantity: 1Sides Adjusted: 1
84
See Application Guide, pages 8-52, for specific models and years
LIG
HT
TRU
CK
LIGHT TRUCK CAMBER/CASTER BUSHINGS
• New DUAL AXIS design for up to 25% Greater Range of Adjustment. Bushing can be set to True Zero• ‘‘Technician Friendly” feature makes on-the-vehicle adjustments a snap!• Universal adjustable design allows all Camber/Caster or combination adjustments with one part number
Ford F150 4x4 1980-1996Ford F250 4x4 1980-1997Ford F350/F550 Super Duty 4x4 1992-2004Dodge Ram 2500/3500 4x4 1994-1999Dodge Ram 2500/3500 4x2 1994-2002
44-5032
Adjustment Range: ±3.2°Quantity: 1Sides Adjusted: 1
ADJUSTABLE
ADJUSTABLEFORD, DODGE, GM AND MAZDA
Patent No. US 7,331,589 B2
Ford F250/F350 4x4 2005-2014
44-5036
Adjustment Range: ±2.5°Quantity: 1Sides Adjusted: 1
ADJUSTABLEPatent No. US 7,331,589 B2
FOR UP-TO-THE-MINUTE PRODUCTAPPLICATIONS CHECK OUT:
WWW.STEMPF.COM & STEMPFONLINE.COM!
85Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
LIGH
T TRUC
K
Ford F450/F550 4x4/4x2 2005-2014Chevrolet Kodiak 2005-2009GMC TopKick 2005-2009
Ford Explorer 4x4/4x2 1990-1994Ford Ranger 4x4/4x2 1990-1997Ford F150/F250/F350 4x2 1987-1996Ford Econoline Van 1992-2011Ford Excursion 4x2 2000-2005Ford F250 Super Duty 4x2 1997-2014Mazda Navajo 4x4/4x2 1991-1994Mazda Pickup 4x4/4x2 1994-1999
44-5037
44-5094
Adjustment Range: ±2.5°Quantity: 1Sides Adjusted: 1
Adjustment Range: ±4°Quantity: 1Sides Adjusted: 1
44-6000 Series
44-600144-600244-600344-600444-600544-600644-600744-600844-600944-601044-6011
44-6000A
0°.25°.5°.75°1°1.25°1.5°1.75°2°2.25°2.5°Assortment -2 Each Size
• Adjusts Camber/Caster or a combination of both from ±.25° to ±2°• Adjusts Camber from +2.25° to +2.5°• Allows for adjustment where there s no OE adjustment available
Ford F250/F350 4x4 2005-2014
CAMBER/CASTER ADJUSTMENT BUSHINGS
1 Per Package
ADJUSTABLE
ADJUSTABLE
Patent No. US 7,331,589 B2
Patent No. US 7,331,589 B2
86
See Application Guide, pages 8-52, for specific models and years
LIG
HT
TRU
CK
42-950 Series CAMBER/CASTER ADJUSTMENT BUSHINGS
Adjust Camber/Caster or a combination of both with these easy-to-install “Hex-Head” bushings
NOTE: Not intended for use on E250/350 models with modified chassis/suspension
Ford Bronco ll 2WD 1989-1990Ford Bronco ll 4WD 1990Ford E150/E250/E350/E450 2WD 1992-2014Ford Excursion 2WD 2000-2005Ford Explorer 2WD/4WD 1991-1994Ford F150 2WD 1987-1996Ford F250/F350 2WD 1992-1998Ford F250/F350/F450/F550 Super Duty (TIB) 2WD 1997-2014Ford Ranger 2WD 1989-1991Ford Ranger 2WD/4WD 1992-1997Ford Truck F250/F350 2WD 1987-1991Mazda B Series P/U 2WD/4WD 1994-1997Mazda Navajo 2WD/4WD 1991-1994
Contains 2 each size bushing through
42-94942-95142-95242-95342-95442-95542-95642-95742-95842-95942-960
2WD 0°.25°.5°.75°1°1.25°1.5°1.75°2°2.25°2.5°
4WD0°.25°3/8°.5°.75°7/8°1.0°1.25°1.5°1.75°2°
Adjustment Range:
Package Quantity: 1 per packageSides Adjusted: 1
42-94942-960
For positive change only on 2WD applications. On 4WDapplications, be sure to check for clearance when installed in negative position
42-950A
CAMBER/CASTER ADJUSTMENT BUSHING ASSORTMENT
42-96142-96242-96342-964
2.75°3°3.25°3.5°
2.25°2.5°2.75°3°
87Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
LIGH
T TRUC
K
44-6020 SeriesCAMBER/CASTER ADJUSTMENT BUSHINGS
• Adjusts Camber/Caster or a combination of both from ±.25° to ±2°
44-602144-602244-602344-602444-602544-602644-602744-602844-6029
44-6020A
0°.25°.5°.75°1°1.25°1.5°1.75°2°Assortment -2 Each Size
Ford F450/F550 4x4/4x2 2005-2014Chevrolet Kodiak 4x4 2005-2009GMC TopKick 4/4 2005-2009
44-9410RADIUS ARM BUSHING STABILIZER
Eliminates vehicle wandering by firming up stock rubber radius arm or strut rod bushing.
Eliminates vehicle wandering by firming up stock rubber radius arm or strut rod bushing. Allows caster adjustment at rear of radius arm
44-9412
44-9413
Ford Bronco ll 2WD 1983-1990Ford Ranger 1983-1997Ford F100/F150 1981-1996Ford Bronco 1980-1996Ford F250 1980-1996Ford Bronco ll 1984-1990Ford Explorer 1991-1994Mazda Navajo 2WD/4WD 1991-1994
Ford Ranger/Explorer 2WD/4WD 1987-Newer Ford Ranger/Explorer with Twin I-Beam suspensions through 1997
CASTER ADJUSTMENT BUSHINGS
Quantity: SetSides Adjusted: 2
Quantity: PairSides Adjusted: 2
88
See Application Guide, pages 8-52, for specific models and years
LIG
HT
TRU
CK
“SUPERLOK” CAMBER/CASTER ALIGNMENT BUSHING RETENTION SYSTEM
42-97042-97242-97442-97642-97842-98042-982
0°1/2°1°1.5°2°2.5°3°
Adjustment Range
New alignment bushing with indexing slots and locking plate to prevent movement or loss of unsecured ‘‘pinchbolt” alignment bushing on modified commercial chassis and recreational/commercial applications
Ford E150/E250/E350/E450 2WD 1992-2014
Package Quantity: 1 per packageSides Adjusted: 1
FORD CASTER ADJUSTING CAMS
Adjustment Range: ±4°Quantity: Pair Sides Adjusted: 288-2228 1-1/4’’ drill bit is
necessary for installation
FRONT SPRINTER VAN CAMBER SHIM KIT
42-4434
42-4431Makes non-adjustable vehicles fully adjustable for camber
Dodge Sprinter 2002-2006Freightliner Sprinter 2002-2006Mercedes-Benz Sprinter 2004-2008
Adjustment Range: +1°(42-4431),+2°(42-4434)Quantity: Pair Sides Adjusted: 1
Ranger F150 1992-199742-439142-439242-441142-4412
42-4413 E150 w/sway bar 1980-1991
F250/F350 1981-1986E250 w/o sway bar, E350 1990-1991F150 1990E150/E250, F250/F350 1992-1997
89Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
LIGH
T TRUC
K
44-240 Series
CASTER SHIMS Provides positive caster changes on early model downsize Jeeps. Installed between lower control arm and frame bracket. Jeep Cherokee 1984-1999Jeep comanchee 1986-1994
44-24044-24144-242
1/32”1/16”1/8”
Quantity: 6 Per Package
44-600 SeriesCAMBER/CASTER ADJUSTMENT BUSHINGS4WD Ford Ranger Through 1989Bronco ll Through 1989
Adjustment Range: See above Quantity: Each Sides Adjusted: 1
44-59944-60144-60244-60344-60444-60544-60644-60744-608
44-600A
0°.25°.5°.75°1°1.25°1.5°1.75°2°Assortment 2 each size
44-766FRONT CAMBER/CASTER BOLT KITFor certain models where the cam diameter is too large (varies by manufacturing facility).
44-768
Ford Explored Sprot Trac 4WD 2001-2005Ford Ranger 2WD/4WD 1998-2011
Adjustment Range: 2.5°Quantity: Pair Sides Adjusted: 1
44-767FRONT CAMBER/CASTER “QUICK CAMS”Allows adjustment of camber/caster in just minutes. Works with OE bolts - cutting installation time by 75% when compared tocam bolt kits! Quick adjustment feature allows fast, easy and exact settings.
Ford Explored 2WD 1995-2001Ford Explorer Sport Trac 4WD 2001-2005Ford Explorer/Explorer Sport 4WD 1995-2001Ford Ranger 2WD/4WD 1998-2011Mazda B Series P/U 2WD/4WD 1998-2009Mercury Mountaineer 2WD/4WD 1997-2001
Adjustment Range: 2.5°Quantity: Pair Sides Adjusted: 1
90
See Application Guide, pages 8-52, for specific models and years
LIG
HT
TRU
CK
44-2496 44-2497
Change camber with a simple turn of the ball stud!
Adjustment Range: ±1°Quantity: EachSides Adjusted: 1
Dodge Ram 2500/3500 4WD 2000-2002Dodge Ram 2500-3500 4WD 2003-2005 (old body style)
Dodge Ram 2500/3500 4WD 2003-2014
Adjustment Range: ±1°Quantity: EachSides Adjusted: 1
44-2498 44-2499ADJUSTABLE UPPER CAMBER/CASTER BALL JOINT
Designed to fit into factory upper control arm. No need to replace entire OE control arm assembly.
GM Pickups and SUVs 2500/3500 1999-2010GM 1500 HD Pickups 2001-2010
Adjustment Range: ±3°Quantity: EachSides Adjusted: 1
Allows for front positive or negative adjustments
Chevrolet Silverado 1500 1999-2006GMC Sierra 1999-2006
Adjustment Range: ±3°Quantity: EachSides Adjusted: 1
ADJUSTABLE UPPER CAMBERBALL JOINT
ADJUSTABLE UPPER CAMBERBALL JOINT
ADJUSTABLE UPPER CAMBER/CASTER BALL JOINT
91Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
LIGH
T TRUC
K
44-2492
44-2494 44-2495
44-2493
Adjustment Range: ±1.75°Quantity: EachSides Adjusted: 1
Chevrolet and GMC 1/2 and 3/4 ton4WD Pickups, blazer, Jimmy, and Suburban 1987-1991Dodge 1/2, 3/4 and 1 ton 4WD Pickupsand Ram Charger 1994-1999Ford 1/2, 3/4 and 1 ton 4WD Pickupsand Bronco through 1979Jeep Trucks through 1983
Jeep Commander 2006-2010Jeep Grand Cherokee 2005-2010
Adjustment Range: ±1°Quantity: EachSides Adjusted: 1
Adjustment Range: ±1°Quantity: EachSides Adjusted: 1
Adjustment Range: ±1°Quantity: EachSides Adjusted: 1
This adjustable lower ball joint allows easy adjustment of camber/caster with a simple turn of the ball stud.
Dodge Ram 1500 2000-2001
Designed to fit into factory upper control arm - no need to replace entire OE control arm assembly.
ADJUSTABLE LOWER CAMBER/CASTER BALL JOINT
ADJUSTABLE UPPER CAMBER/CASTER BALL JOINT
ADJUSTABLE LOWER CAMBER/CASTER BALL JOINT
ADJUSTABLE UPPER CAMBER/CASTER BALL JOINT
Jeep Grand Cherokee 2014Dodge Durango 2014
92
See Application Guide, pages 8-52, for specific models and years
LIG
HT
TRU
CK
44-2489
Designed to fit into factory upper control arm - No need to replace entire O/E control arm assembly.
Dodge 1500 4x4 and 4x2 2006-2014
ADJUSTABLE UPPER CAMBER/CASTER BALL JOINT
Adjustment Range: ±3°Quantity: EachSides Adjusted: 1
44-2498GM Pickups and SUVs 2500/3500 1999-2010GM 1500 HD Pickups 2001-2010
44-2499Allows for front positive or negative adjustments
Adjustment Range: ±3°Quantity: EachSides Adjusted: 1
ADJUSTABLE UPPER CAMBER/CASTER BALL JOINT
44-2610• Quick and easy replacement of a non-adjustable OEM ball joints • Greasable design for extended durability• Allows for continuous future adjustments
Dodge Truck 4500/5500 2WD/4WD 2008 -2014
Adjustment Range: Camber/Caster 2WD ±1°Quantity: Each Camber 4WD ±1°Sides Adjusted: 1
ADJUSTABLE UPPER CAMBER/CASTER BALL JOINT
Chevrolet Silverado 1500 1999-2006GMC Sierra 1999-2006
93Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
LIGH
T TRUC
K
44-2725
44-2726L (LEFT SIDE)
UPPER CONTROL ARM WITH ADJUSTABLE CAMBER/CASTER BALL JOINT
• Quick and easy replacement of OE control arm • Greasable ball joint design for extended durability • Adjustable ball joint allows for continuous future adjustments • OE style control arm
Chevrolet 1500 Pickups/SUVs LD 2WD/4WD 1999-2006 GMC 1500 Pickups/SUVs LD 2WD/4WD 1999-2006
44-2726R (RIGHT SIDE)Chevrolet 1500 Pickups/SUVs LD 2WD/4WD 2007-2013 GMC 1500 Pickups/SUVs LD 2WD/4WD 2007-2013
44-2730
• Quick and easy replacement of OE control arm • Greasable ball joint design for extended durability • Adjustable ball joint allows for continuous future adjustments • OE style control arm • Fits both left and right side of vehicle
UPPER CONTROL ARM WITH ADJUSTABLE CAMBER/CASTER BALL JOINT
Chevrolet 1500 HD Pickups 2WD/4WD 2001-2010Chevrolet 2500/3500 Pickups/SUVs 2WD/4WD 1999-2010 GMC 1500 HD Pickups 2WD/4WD 2001-2010GMC 2500/3500 Pickups/SUVs 2WD/4WD 1999-2010
46-421REAR LINK INBOARD SEALED FLEX JOINT REPLACEMENT BUSHING WITH CAMBER CAM BOLTS • These sealed flex joint bushings replace commonly corroded and seized OEM bushings• Replacement camber adjusting cam bolts also provided. • Exact OEM replacement
Buick Enclave 2008-2014Chevrolet Traverse 2008-2014GMC Acadia 2007-2014Saturn Outlook 2007-2010
Adjustment Range: Camber ±1.5°Quantity: Kit Sides Adjusted: 2
• Fits both left and right side of vehicle
AVAILABLE 3rd QUARTER 2014
Adjustment Range: ±3° Camber, ±1.5° CasterQuantity: 1Sides Adjusted: 1
Adjustment Range: ±3° Camber, ±1.5° CasterQuantity: 1 Sides Adjusted: 1
94
See Application Guide, pages 8-52, for specific models and years
LIG
HT
TRU
CK
41-8257
REAR PINION AND FRONT CASTER AND PINION ANGLE ADJUSTER Jeep Wrangler JK 2007-2014
Adjustment Range: ±3°Quantity: Pair Sides Adjusted: 2
46-2174ADJUSTABLE REAR TOE ARM
Jeep Patriot 2007-2014Dodge Caliber 2007-2012
• Allows for rear positive or negative camber adjustment where no OE adjustments are available• Hexed turnbuckle design for fast and easy adjustments• Includes OE style bushings
46-2178
ADJUSTABLE REAR CAMBER ARM • Comes with drable OE-style bushings• Makes non-adjustable vehicles fully adjustable for rear camber• Unique design allows fast and easy “on-vehicle” replacement
Dodge Caliber 2007-2012Jeep Compass 2007-2014Jeep patriot 2007-2014
Adjustment Range: ±2° Quantity: KitSides Adjusted: 1
Adjustment Range: ±1.5° Quantity: KitSides Adjusted: 1
44-825B
FRONT GREASABLE CAMBER/CASTER CAM BOLT KIT
• Provides camber and caster adjustments on vehicles with frozen OE bolts
Dodge Ram 2500 2014Dodge Ram 3500 2013-2014
Adjustment Range: Caster ±1° -1.5° Pinion angle ±1° -1.5° Quantity: KitSides Adjusted: 1
95Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
LIGH
T TRUC
K
44-250944-2508
44-250744-2506
Chevrolet Suburban 2WD/4WD 2000-2014Chevrolet Tahoe 2WD/4WD 2000-2014GMC Yukon 2WD/4WD 2000-2014Chevrolet Express Van 2WD 2000-2014Chevrolet Express VAn 4WD 2003-2014Chevrolet Silverado HD 1500/2500/3500 2WD/4WD 2003-2014GMC 2WD Savana Van 2001-2014
FRONT CAMBER/CASTER QUICK CAM Replace OE non-adjustable cam with quick Cam, featuring easy-to-access allen wrench slot.
Adjustment Range: ±1.5°Quantity: PairSides Adjusted: 2
FRONT CAMBER/CASTER QUICK CAM
Great for adjustments where space is limited
Chevrolet Colorado 4WD 2004-2012GMC Canyon 4WD 2004-2012Hummer H3 2006-2010Isuzu I35/I28 4WD 2006
Adjustment Range: ±1.5°Quantity: 4Sides Adjusted: 2
FRONT ALIGNMENT CAM GUIDE PIN
Fast and easy replacement of damaged or broken OE guide pins.
Chevrolet Suburban 2WD/4WD 2000-2014Chevrolet Tahoe 2WD/4WD 2000-2014GMC Yukon 2WD/4WD 2000-2014Chevrolet Express Van 2WD 2000-2014Chevrolet Express Van 4WD 2003-2014Chevrolet Silverado 1500/2500/3500 2WD/4WD 1999-2014GMC 2WD Savanda Van 2001-2014
Quantity: 12Sides Adjusted: 2
UPPER CONTROL ARM OFFSET CAMBER BUSHINGS
• OE style design - does not affect ride or handling• Simple installation with use of special bushing adapter set • Only effective means of reclaiming lost camber
88-7950A
1/2 Ton Models - Forged Arm Cadillac Escalade/EXT 4WD 2002-2014Chevrolet Tahoe 2WD/4WD 2000-2014Chevrolet Avalanche 1500 2WD/4WD 2002-2006Chevrolet Express Van 2WD/4WD 2003-2014Chevrolet Silverado 1500 2WD/4WD 1999-2014Chevrolet Suburban 1500 2WD/4WD 2000-2014GMC 2WD Savana Van 2003-2014GMC Sierra 1500 2WD/4WD 1999-2014GMC Yukon XL 1500 2WD 2000-2014GMC Yukon/Denali 2WD/4WD 2000-2014
Adjustment Range: ±1°Quantity: 4Sides Adjusted: 2
96
See Application Guide, pages 8-52, for specific models and years
LIG
HT
TRU
CK
44-2725
44-261044-2510
• OE style design - does not affect ride or handling• Simple installation with use of special bushing adapter set • Only effective means of reclaiming lost camber
88-7950A
Chevrolet Avalanche 2500 HD 2007-2013Chevrolet Silverado HD 2001-2011Chevrolet Silverado HD 2500 1999Chevrolet Suburban 2500 HD 2WD/4WD 2000-2013GMC Sierra HD 2007-2009GMC Yukon XL 2500 HD 2WD/4WD 2000-2013
Adjustment Range: ±1°Quantity: 4Sides Adjusted: 2
3/4 and 1 Ton Models - Forged Arm
• Quick and easy replacement of a non-adjustable OEM ball joints • Greasable design for extended durability• Allows for continuous future adjustments
Adjustment Range: Camber/Caster 2WD ±1°Quantity: Each Camber 4WD ±1°Sides Adjusted: 1
Dodge Truck 4500/5500 2WD/4WD 2008-2014
UPPER CONTROL ARM WITH ADJUSTABLE CAMBER/CASTER BALL JOINT
• Quick and easy replacement of OE control arm • Greasable ball joint design for extended durability • Adjustable ball joint allows for continuous future adjustments • OE style control arm • Fits both left and right side of vehicle
Chevrolet 1500 Pickups/SUVs LD 2WD/4WD 1999-2006 GMC 1500 Pickups/SUVs LD 2WD/4WD 1999-2006
UPPER CONTROL ARM WITH ADJUSTABLE CAMBER/CASTER BALL JOINT
• Quick and easy replacement of OE control arm • Greasable ball joint design for extended durability • Adjustable ball joint allows for continuous future adjustments • OE style control arm
Chevrolet 1500 Pickups/SUVs LD 2WD/4WD 2007-2013 GMC 1500 Pickups/SUVs LD 2WD/4WD 2007-2013
UPPER CONTROL ARM OFFSET CAMBER BUSHINGS ADJUSTABLE UPPER CAMBER/CASTER
BALL JOINT
AVAILABLE 3rdQUARTER 2014
44-2726L (LEFT SIDE)
44-2726R (RIGHT SIDE)
Adjustment Range: ±3° Camber, Quantity: 1 ±1.5° CasterSides Adjusted: 1
Adjustment Range: ±3° Camber, Quantity: 1 ±1.5° CasterSides Adjusted: 1
97Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
LIGH
T TRUC
K
44-249144-2490
44-248944-2480
44-248144-248244-248344-248444-248544-2486
.25°
.5°
.75°1°1.25°1.5°
JEEP CAMBER ADJUSTING BUSHING 1984-1989
The positive locking feature on this improved design allows safe, trouble-free installation.
Adjustment Range: see aboveQuantity: EachSides Adjusted: 1
Designed to fit into factory upper control arm - no need to replace entire O/E control arm assembly.
ADJUSTABLE UPPER CAMBER/CASTER BALL JOINT
Adjustment Range: ±1.75°Quantity: EachSides Adjusted: 1
Adjustment Range: ±1.75°Quantity: EachSides Adjusted: 1
Jeep Cherokee/Wagoneer(downsize)1984-2001Jeep Comanche 1986-1992Jeep Grand Cherokee 1993-1998Jeep Wrangler TJ 1996-2006Jeep Wrangler JK 2007-2014
Jeep Grand Cherokee 1999-2004
Dodge 1500 4x4 and 4x2 2006-2014
ADJUSTABLE LOWER CAMBER/CASTER BALL JOINT
ADJUSTABLE LOWER CAMBER/CASTER BALL JOINT
Adjustment Range: ±3°Quantity: EachSides Adjusted: 1
98
See Application Guide, pages 8-52, for specific models and years
LIG
HT
TRU
CK
44-768FRONT CAMBER/CASTER CAM BOLT KIT
Ford Explorer Sport Trac 4WD 2001-2005Ford Explorer/Explorer Sport 4WD 1995-2001Ford Explored 2WD 1995-2001Ford Ranger 2WD/4WD 1998-2011Mazda B Series P/U 2WD/4WD 1998-2009Mercury Mountaineer 2WD/4WD 1997-2001
Adjustment Range: ±3.25°Quantity: Pair Sides Adjusted: 1
Also available : Set of 4, adjusts both sides
44-768-4
44-769FRONT AND REAR CAMBER/CASTER ALIGNMENT WASHERS
This heavy-duty washer is designed toreplace the factory locking plate to allow easy camber/caster adjustments.
Ford Explorer 2WD/4WD 2002-2005Lincoln Aviator 2003-2005Mercury Mountaineer 2WD/4WD 2002-2005
Adjustment Range: Front Camber ±.75° Front Caster ±1.25°Quantity: 4 Rear Camber ±.5°
Also available : Set of 2444-769-24
44-771FRONT CAMBER/CASTER KIT This product replaces the OE upper control arm alignment washers and will allow full adjustment of camber and caster
Ford Explorer 2WD/4WD 2002-2005Lincoln Aviator 2003-2005Mercury Mountaineer 2WD/4WD 2002-2005
Adjustment Range: Camber ±.75°Quantity: Set Caster ±1.25°Sides Adjusted: 2
44-773REAR CAMBER ADJUSTMENT CAM KIT
This kit replaces the OE washers on the lower control arm and allows full adjustment of camber.
Ford Explorer 2WD/4WD 2002-2005Lincoln Aviator 2003-2005Mercury Mountaineer 2WD/4WD 2002-2005
Adjustment Range: ±.5°Quantity: SetSides Adjusted: 2
99Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
LIGH
T TRUC
K
41-8250
Chevrolet and GMC 1/2,3/4, 1 ton 4WD and 2WD Pick-Ups 1988-2000Suburban 1992-2000
FRONT CAMBER/CASTER CAM BOLT KIT
Adjustment Range: ±2.25°Quantity: 4Sides Adjusted: 2
41-8255
REAR DIFFERENTIAL CAM BOLT
Jeep Wrangler TJ 1997-2006
• Accurately adjusts and maintains proper drive line angle • Required for vehicles where lift kits have been installed
Adjustment Range: ±2°Quantity: Pair Sides Adjusted: 2
41-8251FRONT REPLACEMENT CAM BOLT WITH QUICK CAMS
Adjustment Range: ±1.5°Quantity: 4Sides Adjusted: 2
41-8256FRONT CASTER/PINION CAM BOLT KIT
Jeep:Wrangler TJs 1997-2006Grand Cherokee 1993-1998Ram Trucks (36mm cams) 1994-1998
Makes vehicle fully adjustable for caster and pinion angle.
Adjustment Range: ±3°Quantity: PairSides Adjusted: 2
GM replacement bolt kit with Quick Cams is a direct replacement and will restore the factory adjustment. On many models this kit will greatlyimprove accessibility for easy adjustment.
Chevrolet Tahoe 2000-2014Chevrolet Express Van 2003-2014Chevrolet Silverado 1999-2014Chevrolet Suburban 1500 2000-2014GMC Envoy 2003-2009GMC Sierra 1999-2014Youkon XL 2WD 2000-2014Hummer H2 2003-2009
100
See Application Guide, pages 8-52, for specific models and years
LIG
HT
TRU
CK
44-78944-786
44-78444-775REAR CAMBER/TOE NUT REAR CAMBER CAM BOLT KIT
Ford Expedition 2WD/4WD 2003-2006Lincoln Navigator 2WD/4WD 2003-2006
Adjustment Range: ±2.75°Quantity: Pair Sides Adjusted: 2
Adjustment Range: ±1°Quantity: Pair Sides Adjusted: 2
Adjustment Range: Camber ±2°Quantity: Kit Caster ±1.5°Sides Adjusted: 2
Adjustment Range: Camber ±2°Quantity: Set Caster ±1.5°Sides Adjusted: 2
FRONT CAMBER/CASTER CAM BOLT KIT FRONT CAMBER/CASTER CAM BOLT KIT This kit provides both large and small guides with a cam bolt assembly to make accurate and easy adjustment of camber and caster.
This kit provides steel guides with cam bolt assemblies to make accurate and easy change of camber and caster. Allows for futureadjustments.
Ford Expedition 2WD/4WD 2003-2006Lincoln Navigator 2WD/4WD 2003-2006 Ford F150 2WD/4WD 2004-2008
Lincoln Mark LT 2WD/4WD 2006-2008
• Makes non-adjustable vehicles fully adjustable for rear toe• Unique design allows fast and easy “on-vehicle” replacement• This kit can be used to adjust either the camber or toe
Chevrolet Equinox 2005-2014Pontiac Torrent 2006-2009Saturn Vue 2007-2009Suzuki XL7 2007-2009GMC Terrain 2010-2013
101
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
LIGH
T TRUC
K
44-79444-792
44-79144-790
Adjustment Range: Camber ±.75°Quantity: Kit Caster ±1.25°Sides Adjusted: 2
Adjustment Range: Camber ±1°Quantity: Kit Caster ±1.5°Sides Adjusted: 2
Adjustment Range: Camber ±2°Quantity: Kit Caster ±1.5°Sides Adjusted: 2
FRONT CAMBER/CASTER CAM BOLT KIT FRONT CAMBER/CASTER ADJUSTMENT KIT
Make accurate and easy adjustment to camber and caster. allows for future adjustments.
This kit provides a steel guide with cam assemblies to make 1° camber and caster adjustment. Ford Expedition 2WD/4WD 2007-2011
Ford F150 2WD/4WD 2009-2014Lincoln Navigator 2WD/4WD 2006-2014
Ford Expedition 2WD/4WD 2007-2012Ford F150 2WD/4WD 200Lincoln Navigator 2WD/4WD 2006-2014Lincoln Mark LT 2006-2008
FRONT CAMBER/CASTER CAM BOTL AND PLATE KIT
• Fast bolt-on-installation - no drilling or modifying required• Precise, easily-controlled adjustments• Allows future adjustments
Dodge Ram 1500 2WD/4WD 2002-2005
FRONT CAMBER CAM AND GUIDE KIT
Dodge Durango 2011-2014Jeep Grand Cherokee 2011-2014
Adjustment Range: ±1.5°Quantity: Kit Sides Adjusted: 2
Designed to provide adjustment where no OE adjustmnet is available
102
See Application Guide, pages 8-52, for specific models and years
LIG
HT
TRU
CK
44-795FRONT CASTER KIT
Dodge Durango 2011-2014Jeep Grand Cherokee 2011-2014
Designed to provide adjustment where no OE adjustment is available
Adjustment Range: ±1°Quantity: Kit Sides Adjusted: 2
44-820FRONT CAMBER/CASTER CAM BOLT KIT
Makes vehicle fully adjustable for camber and caster. Works with OE cam guide.
Nissan Armada 2WD/4WD 2005-2014Nissan Frontier 2WD/4WD 2005-2014Nissan Pathfinder 4WD 2005-2014Nissan Titan 2WD/4WD 2004-2014Suzuki Equator 2009-2011
Adjustment Range: camber/caster ±2°Quantity: 4Sides Adjusted: 2
44-82644-824FRONT GREASABLE CAMBER/CASTER CAM BOLT KIT
Provides camber and caster adjustments on vehicles with frozen OE bolts
Adjustment Range: ±1.5°Quantity: Kit Sides Adjusted: 2
Toyota Tacoma 1995-2004Toyota 4-Runner 1996-2002
FRONT CASTER/PINION ANGLE CAM BOLT KIT
Provides caster and pinion angle adjustments for 2500/3500 Dodge trucks with no adjustment from factory or OEM frozen or corroded bolts
Dodge 2500/3500 4X4 pickups 1999-2012
Adjustment Range: Caster ±1°-1.5°Quantity: Kit Pinion angle ±1°-1.5°Sides Adjusted: 2
103
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
LIGH
T TRUC
K
44-910 44-2460
44-827 44-828FRONT GREASABLE CAMBER/CASTER CAM BOLT KIT
FRONT GREASABLE CAMBER/CASTER CAM BOLT KIT
Provides camber and caster adjustments on vehicles with frozen OE bolts
Adjustment Range: ±1.5°Quantity: Kit Sides Adjusted: 2
Toyota 4-Runner 2010-2014Toyota FJ Cruiser 2010-2014Lexus GX 2010-2014
CAMBER ADJUSTING ECCENTRIC
Easily adjusts 1 ton 4X4’s with Dana model 60 closed king pin axles
Chevrolet K Series 1961-1990Ford F350 1975-1991
Adjustment Range: ±3°Quantity: Each
FRONT CAMBER/CASTER ADJUSTMENT BUSHING
GM, DODGE, JEEP(through 1993)FORD(through 1979)
44-246144-246244-246344-246444-246544-2466
44-2469-6*
.25°
.5°
.75°1°1.25°1.5°(6 pieces) Low Profile Castle Nut
*Necessary in some higher degree applications for proper clearance
Adjustment Range: see aboveQuantity: EachSides Adjusted: 1
Provides camber and caster adjustments on vehicles with frozen OE bolts
Adjustment Range: ±1.5°Quantity: Kit Sides Adjusted: 2
Toyota Tacoma 2005-2014Toyota 4-Runner 2003-2009Toyota FJ Cruiser 2007-2009Lexus GX 2003-2009
104
See Application Guide, pages 8-52, for specific models and years
LIG
HT
TRU
CK
46-9812
46-9811COMPLETE REAR SUSPENSION LINK ASSEMBLY WITH 17MM SOCKET STUD
COMPLETE REAR SUSPENSION LINK ASSEMBLY WITH 15MM SOCKET STUD
Ford Expedition 2WD/4WD 2006-2006Lincoln Navigator 2WD/4WD 2003-2007
Ford Explorer 2WD/4WD 2002-2005Lincoln Aciator 2WD/4WD 2003-2005Mercury Mountaineer 2WD/4WD 2002-2005
COMPLETE REAR SUSPENSION LINK ASSEMBLY
46-9813
Built 3/4/02 or After
Built Before 3/4/02
Problem: Non-Greasable OE tie rod ends prematurely wear and failSolution: Northstar Manufacturing’s rear replacement links have a greasable tie rod end to help extend overall life.
Ford Explorer 2WD/4WD 2002Mercury Mountaineer 2WD/4WD 2002
HEAV
Y DU
TY TRUCK
105
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
THE MOST POPULAR ASSORTMENTS THAT GET YOU INTO THE HEAVY DUTY
ALIGNMENT BUSINESS!COMPLETE TANDEM SHIM ASSORTMENT
TAS-210
Our Most Complete and Most Popular Assortment!
Assortment Contains:
2 ea. Hendrickson Walking Beam Kits (43-447)
2 ea. Kenworth 8-Bagger Shims (43-540 Series)
4 ea. Freightliner Torque Arm Shims (43-621 Series)
4 ea. Peterbilt/Kenworth Shims (43-641 Series)
4 ea. IHC Torque Arm Shims (43-651 Series)
4 ea. Wilson Hutchins Shims (43-408 Series)
6 ea. Peterbilt Air Leaf Shims (43-411 Series)
12 ea. Freightliner Single-Slot Shims (43-415 Series)
6 ea. Freightliner Double-Slot Shims (43-421 Series)
4 ea. Freightliner Air Glide Shims (43-425 Series)
6 ea. Volvo/White Shims (43-431 Series)
8 ea. IHC Torque Arm Shims (43-441 Series)
6 ea. Peterbilt "Low Air" Shims (43-645 Series)
UNI-WEDGE TRUCK SHIM ASSORTMENT950-48A
An assortment of 48 Uni-wedge "Break-Off" shims (6 of each taper) to cover a wide variety of spring widths & degree changes.
Includes truck and trailer alignment specifications and two sturdy metal storage cases. 210 shims and kits in all! Part numbers are shown on inside lid to make reordering a breeze!
Call Stempf for all of your alignment needs!
106
H
EAV
Y D
UTY
TRU
CK
See Application Guide, pages 8-52, for specific models and years
WILSON TANDEM SHIM FOR HUTCHINS SUSPENSION Thickness Qty 43-408 1/32" 12 43-409 1/16" 12 43-410 1/8" 12
PETERBILT AIR LEAF ADJUSTMENT SHIM Thickness Qty 43-411 1/32" 12 43-412 1/16" 12 43-413 1/8" 12
FREIGHTLINER “SINGLE SLOT”ADJUSTMENT SHIM Thickness Qty 43-415 1/32" 12 43-416 1/16" 12 43-417 1/8" 12
FREIGHTLINER “DOUBLE SLOT” AIR RIDE SHIM Thickness Qty 43-421 1/32" 12 43-422 1/16" 12 43-423 1/8" 12
FREIGHTLINER AIR GLIDEADJUSTMENT SHIM Thickness Qty 43-425 1/32" 12 43-426 1/16" 12 43-427 1/8" 12
VOLVO/WHITE ADJUSTMENT SHIM Thickness Qty 43-431 1/32" 12 43-432 1/16" 12 43-433 1/8" 12
IHC, FORD, VOLVO TORQUE ARM ADJUSTMENT SHIM Thickness Qty 43-441 1/32" 12 43-442 1/16" 12 43-443 1/8" 12
2"
3/4"
13/16"
2"
5-1/2"
4-1/2"
4-1/2"
HENDRICKSON ADJUSTABLE WALKING BEAM SHIM KIT43-447 Includes 2 5-piece kitsEach 5 piece kit includes: • 2 of 1/8" • 1 of 1/16" • 2 of 1/32"
KENWORTH AIR GLIDE “8 BAGGER” SPACERS Thickness Qty 43-548 1/32" 643-549 1/16" 6 43-550 1/8" 6 43-551 1/4" 643-552 1/2" 6 43-553 3/4" 643-554 1" 6
FREIGHTLINER TORQUE ARM SHIMSFor Freightliner FAS Air Ride Thickness Qty 43-621 1/32" 12 43-622 1/16" 12 43-623 1/8" 12
PETERBILT/KENWORTH TANDEM AXLE SHIMS Thickness Qty 43-641 1/32" 12 43-642 1/16" 12 43-643 1/8" 12
PETERBILT/KENWORTH “LOW AIR” THRUST ANGLE SHIMS Thickness Qty 43-645 1/32" 12 43-646 1/16" 12 43-647 1/8" 12
INTERNATIONAL TORQUE ARM SHIMS Thickness Qty 43-651 1/32" 12 43-652 1/16" 12 43-653 1/8" 12
Shims install in these locations to correct for thrust line
misalignment
EUCLID NO. HENDRICKSON NO. E-9327 50130-000 E-9328 50131-000 E-9329 50132-000
KIT REPLACES ALL FOLLOWING ITEMS:
4.44"
4.375"
5.813"
4.40"
5.72"
7/8"
HEAV
Y DU
TY TRUCK
107
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
VANHOOL LOWER CONTROL ARM AND BOGEY AXLE SHIM Thickness Qty 43-701 1/32" 12 43-702 1/16" 12 43-703 1/8" 12
VANHOOL UPPER CONTROL ARM AND DRIVE AXLE SHIM Thickness Qty 43-707 1/32" 12 43-708 1/16" 12 43-709 1/8" 12
PREVOST CASTER SHIMS Thickness Qty 43-711 1/32" 12 43-712 1/16" 12 43-713 1/8" 12
PREVOST “H“ & “XL“ SERIES STEER AXLE CASTER SHIM Thickness Qty 43-715 1/32" 12 43-716 1/16" 12 43-717 1/8" 12
PREVOST “H“ & “XL“ SERIES DRIVE AXLE, THRUST LINE & BOGEY AXLE SCRUB ANGLE SHIM Thickness Qty 43-721 1/32" 12 43-722 1/16" 12 43-723 1/8" 12
PREVOST/VANHOOLSHIM ASSORTMENTPVH-90Contains 6 each of all series and thickness Prevost and VanHool shims. 90 shims in all! Situated in a sturdy metal storage case for easy organization and reordering.
BUILD YOUR OWN ASSORTMENT!TAS-2BOXA sturdy metal storage containerwith lots of dividers to create yourown assortment!
Slot length .95"Slot width .63"
Slot length 1.0"Slot width .75"
Slot length 4.125"Slot width 1.25"
Slot length 1.25"Slot width .823"
Slot length 4.5"Slot width 1.06"
HENDRICKSON (HTB) TORQUE ARM SHIM For 2007-Up International & SpartanHTB-400 Suspension
Thickness Qty 43-661 1/32" 12 43-662 1/16" 12 43-663 1/8" 12
5-1/2"
HENDRICKSON (HTB) TRACK BOX SHIM KIT 43-674 For 2007-Up International & Spartan HTB-400 Suspension
HENDRICKSON (HTB) TRACKBOX SHIM STARTER KIT 43-680A
Thickness Qty 43-661 1/32" 12 pieces 43-662 1/16" 12 pieces 43-663 1/8" 12 pieces43-674 n/a 6 kits
2 Packages of 5 shims, Including: Thickness Qty 1/32" 2 1/16" 1 1/8" 2
For 2007-Up International & Spartan HTB-400 Suspension
Kit services 6 or more axles, 3 or more trucks
Includes all of the following shims(shown above):
108
HEA
VY
DU
TY T
RUCK
See Application Guide, pages 8-52, for specific models and years
UNI-WEDGE TRUCK SHIM ASSORTMENT
950-48A
An assortment of 48 Uni-wedge "Break-Off" shims (6 of each taper) to cover a wide variety of spring widths & degree changes.
COMPLETE TANDEM SHIM ASSORTMENT
TAS-210
Our Most Complete and Most Popular Assortment!
Assortment Contains:2 ea. Hendrickson Walking Beam Kits (43-447)2 ea. Kenworth 8-Bagger Shims (43-540 Series)4 ea. Freightliner Torque Arm Shims (43-621 Series)4 ea. Peterbilt/Kenworth Shims (43-641 Series)4 ea. IHC Torque Arm Shims (43-651 Series)4 ea. Wilson Hutchins Shims (43-408 Series)6 ea. Peterbilt Air Leaf Shims (43-411 Series)12 ea. Freightliner Single-Slot Shims (43-415 Series)6 ea. Freightliner Double-Slot Shims (43-421 Series)4 ea. Freightliner Air Glide Shims (43-425 Series)6 ea. Volvo/White Shims (43-431 Series)8 ea. IHC Torque Arm Shims (43-441 Series)6 ea. Peterbilt "Low Air" Shims (43-645 Series)
Includes truckand trailer alignment specifications and two sturdy metal storage cases. 210 shims and kits in all! Part numbers are shown on inside lid to make reordering a breeze!
MOST POPULAR TANDEM SHIM ASSORTMENT
TAS-108
Assortment Contains:6 ea. Peterbilt Air Leaf Shims (43-411 Series)12 ea. Freightliner Single-Slot Shims (43-415 Series)6 ea. IHC Torque Arm Shims (43-441 Series)4 ea. Hendrickson Walking Beam Kits (43-447)2 ea. Kenworth 8-Bagger Shims (43-548 Series)6 ea. Peterbilt/Kenworth Shims (43-641 Series) 6 ea. IHC Torque Arm Shims (43-651 Series)
Includes truck and trailer alignment specifications and one sturdy metal storage case. 108 shims and kits in all! Part numbers are shown on inside lid for easy reordering!
HEAV
Y DU
TY TRUCK
109
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
“NO-SLIP“ SHIMSDurable zinc shims cut your stock in half. Shims can cover two spring widths by being cut to a smaller size.
Typically sold 6 per box, but also available individually
PART NO. WIDTH DEGREE801 1-3/4", 2 1/2°802 1-3/4", 2 1°803 1-3/4", 2 1-1/2°804 1-3/4", 2 2°805 1-3/4", 2 2-1/2°806 1-3/4", 2 3°807 1-3/4", 2 3-1/2°808 1-3/4", 2 4°809 1-3/4", 2 5°810 1-3/4", 2 6°
PART NO. WIDTH DEGREE841 2-1/4", 2-1/2" 1/2°842 2-1/4", 2-1/2" 1°843 2-1/4", 2-1/2" 1-1/2°844 2-1/4", 2-1/2" 2°845 2-1/4", 2-1/2" 2-1/2°846 2-1/4", 2-1/2" 3°847 2-1/4", 2-1/2" 3-1/2°848 2-1/4", 2-1/2" 4°
“UNI-WEDGE“ TRUCK CASTER SHIMS• One shim covers three spring widths by breaking off from 4" to either 3-1/2" or 3"• Made of a special heavy-duty zinc for durable service• A great way to reduce your inventory
PART NO. WIDTH DEGREE43-951 3", 3-1/2", 4" 1/2°43-952 3", 3-1/2", 4" 1°43-953 3", 3-1/2", 4" 1-1/2°43-954 3", 3-1/2", 4" 2°43-955 3", 3-1/2", 4" 2-1/2°43-956 3", 3-1/2", 4" 3°43-957 3", 3-1/2", 4" 3-1/2°43-958 3", 3-1/2", 4" 4°
Typically sold 6 per box, but also available individually
“STEEL AXLE“ WEDGESMost wedges flatten & disintegrate, the steel axle wedge holds up to the most demanding applications!
PART NO. DIMENSION DEGREEST1051 8-1/4” long by 3” wide Drive Axle Wedge 1°ST1052 8-1/4” long by 3” wide Drive Axle Wedge 1.5°ST1053 8-1/4” long by 3” wide Drive Axle Wedge 2°ST1054 8-1/4” long by 3” wide Drive Axle Wedge 2.5°ST1055 8-1/4” long by 3” wide Drive Axle Wedge 3°ST1061 8-1/4” long by 3-1/2” wide Drive Axle Wedge 1°ST1062 8-1/4” long by 3-1/2” wide Drive Axle Wedge 1.5°ST1063 8-1/4” long by 3-1/2” wide Drive Axle Wedge 2°ST1064 8-1/4” long by 3-1/2” wide Drive Axle Wedge 2.5°ST1065 8-1/4” long by 3-1/2” wide Drive Axle Wedge 3°ST1071 6-1/2” long by 4” wide Steel Caster Wedge 1° ST1072 6-1/2” long by 4” wide Steel Caster Wedge 1.5°ST1073 6-1/2” long by 4” wide Steel Caster Wedge 2°ST1074 6-1/2” long by 4” wide Steel Caster Wedge 2.5°ST1075 6-1/2” long by 4” wide Steel Caster Wedge 3°
Most wedges flatten& disintegrate
The Steel Axle Wedge holds up to THE MOST DEMANDING
APPLICATIONS!
110
HEA
VY
DU
TY T
RUCK
See Application Guide, pages 8-52, for specific models and years
MANGANESE BRONZE - Made from the toughest material used in heavy-duty truck shims. They will not crack, spread or mash out and are recommended for heavy-duty service.
ZINC - Die cast manufacturing produces an unmatched finish. Made from a strong material, these heavy-duty shims are priced similar to aluminum.
Priced individually; typically sold 6 per box * Available only in non die cast aluminum.
Die Cast Zinc
PART NO. WIDTH LENGTH CHANGE43-1040B 2-1/2" 5" 1/2°43-1041B 2-1/2" 5" 1°43-1042B 2-1/2" 5" 1-1/2°43-1043B 2-1/2" 5" 2°43-1044B 2-1/2" 5" 2-1/2°43-1045B 2-1/2" 5" 3°43-1046B 2-1/2" 5" 3-1/2°43-1047B 2-1/2" 5" 4°
______________________________________________43-1050B 3” 6” 1/2°43-1051B 3” 6” 1°43-1052B 3” 6” 1-1/2°43-1053B 3” 6” 2°43-1054B 3” 6” 2-1/2°43-1055B 3” 6” 3°43-1056B 3” 6” 3-1/2°43-1057B 3” 6” 4°
ACCU-WEDGE™
TRUCK CASTER SHIMS• Full 1/8" leading edge adds consistency, integrity & strength• CLEARLY stamped for easy identification• Smooth, clean finish is unmatched by any similar product• End-to-end, 1/16" thicker than most competitive products for Super Heavy-Duty service
PART NO. WIDTH LENGTH CHANGE43-1060B 3-1/2” 6-1/4” 1/2°43-1061B 3-1/2” 6-1/4” 1°43-1062B 3-1/2” 6-1/4” 1-1/2°43-1063B 3-1/2” 6-1/4” 2°43-1064B 3-1/2” 6-1/4” 2-1/2°43-1065B 3-1/2” 6-1/4” 3°43-1066B 3-1/2” 6-1/4” 3-1/2°43-1067B 3-1/2” 6-1/4” 4°
___________________________________________43-1070B 4” 6-1/2” 1/2°43-1071B 4” 6-1/2” 1°43-1072B 4” 6-1/2” 1-1/2°43-1073B 4” 6-1/2” 2°43-1074B 4” 6-1/2” 2-1/2°43-1075B 4” 6-1/2” 3°43-1076B 4” 6-1/2” 3-1/2°43-1077B 4” 6-1/2” 4°
PART NO. WIDTH LENGTH CHANGEAL1040* 2-1/2” 5” 1/2°AL1041* 2-1/2” 5” 1°AL1042* 2-1/2” 5” 1-1/2°AL1043* 2-1/2” 5” 2°AL1044* 2-1/2” 5” 2-1/2°AL1045* 2-1/2” 5” 3°AL1046* 2-1/2” 5” 3-1/2°AL1047* 2-1/2” 5” 4°
______________________________________________AL1050* 3” 6” 1/2°43-2051B 3” 6” 1°43-2052B 3” 6” 1-1/2°43-2053B 3” 6” 2°43-2054B 3” 6” 2-1/2°43-2055B 3” 6” 3°43-2056B 3” 6” 3-1/2°43-2057B 3” 6” 4°
PART NO. WIDTH LENGTH CHANGE43-2060B 3-1/2” 6-1/4” 1/2°43-2061B 3-1/2” 6-1/4” 1°43-2062B 3-1/2” 6-1/4” 1-1/2°43-2063B 3-1/2” 6-1/4” 2°43-2064B 3-1/2” 6-1/4” 2-1/2°43-2065B 3-1/2” 6-1/4” 3°43-2066B 3-1/2” 6-1/4” 3-1/2°43-2067B 3-1/2” 6-1/4” 4°
___________________________________________43-2070B 4” 6-1/2” 1/2°43-2071B 4” 6-1/2” 1°43-2072B 4” 6-1/2” 1-1/2°43-2073B 4” 6-1/2” 2°43-2074B 4” 6-1/2” 2-1/2°43-2075B 4” 6-1/2” 3°43-2076B 4” 6-1/2” 3-1/2°43-2077B 4” 6-1/2” 4°
Priced individually; typically sold 6 per box
HEAV
Y DU
TY TRUCK
111
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
CARBON STEEL TRUCK TURNPLATES
25-24-1-2■ For heavy-duty applications■ Resists corrosion■ Robotic manufacturing for optimum consistency■ Evolutionary "sandwich" design eliminates buildup
CARBON STEEL FRONT TURNPLATES
CA-14■ Powder-coating reduces maintenance■ Base will not swell like
conventional iron plates■ Steel is laser-cut,
guaranteeing flatness
SpecificationsWarranty: 3 yearsDimensions: 14" x 14" x 1-1/2"Weight Capacity: 8,000 front axel, 4,000 per plateWeight: 43 lbs. per plateCompatibility: most alignment racks: Hunter, JBC, Rotary, Forward, Challenger, ALM
• Passenger car and light truck• Stainless steel for corrosion-free
performance• Plasma cut and robotically welded for
consistency• Evolutionary "sandwich" design
eliminates buildup
STAINLESS STEEL FRONT TURNPLATES20-1411-1
REAR SLIP PLATE SETWA1851Allows the conversion of ramps, benches and racks with flush turntables into four-wheel alignment equipment. The slip plates, made of steel, have an overall size of 17-1/4"x11-1/2" and work area of 13-1/4"x10-1/2", and are 3/8" high. The slip plates allow unrestricted movement of the rear wheels (1 inch in each direction) to make easy, accurate adjustments — eliminating the friction between the tires and support system.
CASTER/CAMBER GAUGE WA684An accurate magnet caster/camber gauge that attaches to the machined hub surface by the industry’s most powerful Alnico magnet. Don’t worry about bearing run-out or wheel run-out. This unit is fast and eliminates any guessing or errors with positive individual calibrated levels.
HEAVY-DUTY TRUCK TURNPLATESHD-CA-1■ 14,000 lbs per plate ■ Convenient matching handles■ Dynamic Load Control ■ Red in color■ 18" x 18" x 2 1/2" tall
TURN PLATE REPAIR KITS AVAILABLE! — CALL US!
112
HEA
VY
DU
TY T
RUCK
See Application Guide, pages 8-52, for specific models and years
TOE BAR ASSEMBLY
301-PThis is a simple, inexpensive method of testing toe on front and rear wheels of all passenger cars to medium-duty trucks. Includes pointers. Scribe available separately.
TOE BAR FOR LARGE TRUCKS
WA515Adjustable to hub height for greater accuracy. Built of heavy-duty castings and bright zinc 18-gauge welded steel tubing, 8 ft. in length to assure long life w/o bar distortion. Graduated in 1/32" and mm.Includes 10" stands, 11" and 17" pointersand a WA516 Scribe.
WHEEL SPREADER
WA918Accurately spreads and holds the front wheels of the vehicle being tested with a toe gauge that does not require moving the vehicle. To be used with the WA510, WA512 and WA515. It is simple, easy and efficient to use. It saves time and a more accurate reading is obtained. Extension 42" minimum, 71" maximum. Pressure 23 Lbs.
The WA1887 Lo Profile Extension for car carriers and low profile trailers simplifies fast, accurate measurements from the kingpin center to the trailer tandems. It is designed especially for car carriers, furniture vans. low beds and all other trailers that have a very low profile. It is used in conjunction with the WA1977 Lo Profile Extension Bar and the WA1888 Tandem Tracker or the WA1890 Tandem Tracker for Aluminum Wheels, which brings the contact point of measuring point down to height of the tire side wall. Measuring and tracking these low profile trailers is now simple, easy and accurate.
TANDEM TRACKER SET
WA1888LThe WA1888 Tandem Tracker Set is used to aid in measuring the tracking of the tandem axles in relation to the Kingpin Extension and the front and rear axles on the tandem. They extablish the measuring point from the center of the wheel to the Kingpin Extension and between the centers of the front and rear axles on the tandem.
LO PROFILE KINGPIN EXTENSION
WA1887
HEAV
Y DU
TY TRUCK
113
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
NEEDLE-POINT SCRIBE
301-SA needle point scribe to get a sharp line. For 301 type toe gauge. Spring loaded, self-adjusting.
TRACTOR TRACKER “U“ BOLT EXTENSION
WA1896The WA1896 Tractor Tracker "U" Bolt Extension Set is used to measure the tandem axles on tractors in relationship to the front spring "U" Bolts. The extenders establish a measuring point to the "U" Bolts on front axles to measure to the rear tandems. Two of the extenders have 7/8" threads and two have 3/4" to accommodate the most popularly used "U" Bolts. The extenders should be used with the WA1877 Low Profile Extender Bar and either of the WA1888 Tandem Tracker series for steel wheels or the WA1890 Tandem Trackers for aluminum wheels.
LO PROFILE EXTENDER BAR
WA1877
The WA1877 Lo Profile Extender Bar is designed to lower the measuring point of the tandems from the hub, making it easy to measure the tracking of low profile trailers such as car carriers, moving vans and low beds.
TANDEM TRACKERSET FOR ALUMINUM WHEELS
WA1890
The WA1890 Tandem Tracker Set for Aluminum Wheels (up to 28") is used to help measure the tracking of the tandem axles in relation to the Kingpin Extension and the front and rear axles on the tandem. They establish the measuring point from the center of the wheel to the Kingpin Extension and between the centers of the front and rear axles on the tandem. The Trackers clamp on the outside of the wheel so they will not damage aluminum wheels.
The Extender Bar is slipped over the measuring rod on the WA 1888 Tandem Tracker or over the low profile sleeve on the WA1890 Tandem Trackers for Aluminum Wheels, placed against the sidewall of the tire and leveled with the leveling bubble. Measurements can then be made back from the WA1889 Kingpin Extension for standard trailers or the WA1887 Lo Profile Kingpin Extension.
MAGNETIC GAUGE RIM ADAPTOR
WA1099For all trucks with up to a 28" maximum wheel diameter. This magnetic rim adaptor can be used on trucks when the hub is inaccessible by any other means. By use of hand tightened set screws and a thumb screw, the adaptor can be easily attached to the rim for accurate measurements and adjustments.
114
HEA
VY
DU
TY T
RUCK
See Application Guide, pages 8-52, for specific models and years
SKIRT NUT®Not just the BEST solution for truck wheel vibration and tire wear – it’s the ONLY solution!
Reminder: To maintain correct clamping force, improve tire wear and eliminate the risk of wheel loss, 10 Skirt Nuts per wheel are required.
HEAV
Y DU
TY TRUCK
115
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
WHEEL CENTERING SLEEVE SET1504AThis set is for the 22.5"/24.5" steel and aluminum wheels and 19.5" aluminum wheels only. Stays on stud permanently. Set of six (3 each per wheel).
THE TRU-BALANCE TRUCK WHEEL ALIGNMENT PIN SETA1339Tru-Balance is the first tool to provide accurate centering of UNI-Mount (hub-piloted) truck wheels. This tool was designed to minimize the wheel vibration that creates Mini/Maxi tire wear. This occurs when the wheel is not accurately centered on the studs. These easy-to-use tools are manufactured from mild steel and then heat-treated for wear and to ensure perfect wheel alignment of 22.5" / 24.5" steel and aluminum wheels and 19.5" aluminum wheels only (not steel). One set comes complete with 3 tools and a handy storage case.
EXTENDED LENGTH WHEEL CENTERING PIN SET A1573This set is for the22.5"/24.5" steel and aluminum wheels(16,000 & 18,000 lb. axles). These are 1" longer than the standard set.
Tired of excess vibration caused by misaligned Uni-Mount wheels? Stempf has your solution!
Got bad wheel vibes?SKIRT NUT LUG NUTS SN100-10 (PACKAGE OF 10)
FEATURES/BENEFITS:• Stops wheel/hub vibrations & tire wear• Prevents emergencies & limits owner liability• No more loose wheels! Stops wheel clocking & hardware damage• Eliminates wasted fuel caused by rolling resistance "drag"• Replaces old style M22 flange nuts on hub-piloted wheels
WHEEL CENTERING PIN SET1557AThis set is for 19.5" steel wheels only.
Wheel Tite Sleeve Nut System
The trucking industry’s safest,
best fastenerfor hub-piloted
wheels!
Developed to reduce wheel vibrations and to help prevent the unpredictable wheel-off situations. This system is specifically designed for Class 8 Truck Steer& Drive Axles, and Trailers.
STANDARD APPLICATIONS:• The Sleeve offers more thread engagement & deeper penetration• The chamfered nose allows for ease of wheel centering & installation The "Sleeve" • Protects & covers the threads from wear & the elements • Reduces vibration & the wear & tear on wheel ends • Fills the gap between the stud & the stud hole & allows the rim to rest on the sleeve • Lengths designed for specific axle applications & wheel configurations
GL-29066 mm SleeveDesigned for Steel - Steers
GL-291919 mm SleeveDesigned for Aluminum - Steers Steel/Steel - DriveSteel Outer/Alum. Inner - Drives
GL-292828 mm SleeveDesigned for H.D. Aluminum Super Single - Wide Base Alum. Outer/Steel Inner - Drives
GL-293939 mm SleeveDesigned for Dual Aluminum - Drive Axle
116
HEA
VY
DU
TY T
RUCK
See Application Guide, pages 8-52, for specific models and years
LEAF SPRING PIN & BUSHING SERVICE KIT15000 CORE KIT ONLY. THIS KIT REQUIRES ONE OR MORE OF THE ADAPTER KITS LISTED BELOW.
The Pin & Bushing Service Kit removes and installs both rubber isolated and threaded pin bushings from the spring eye and chassis mounts without removing the spring packs from the axle. The hydraulic cylinder creates 20 Tons of pulling power for quiet smooth removal & installation. Components are made from heat treated alloy steels for strength & durability with a black oxide finish that resists corrosion. (Requires 10,000 PSI Hydraulic Power Source)
• Shop service time on these jobs can easily be reduced by up to 70%!• No handling of large suspension assemblies required• No removal of spring packs from the axle• 4140 chrome-moly steel components
SPRING PIN & BUSHING ADAPTER KITS
15004-15015 Made from heat treated alloy steels for strength & durability with a Black Oxide finish for extended life. Shipping Weight 3-5 lbs.
HEAVY DUTY KING PIN PRESS90150
Part # Description#15004 Paccar Threaded Pin and Bushing #5295 #15005 Paccar Rubber Isolated Pin and Bushing #B13-1002#15006 Paccar Rubber Isolated Pin and Bushing #B65-1001#15007 Paccar Rubber Isolated Pin and Bushing #B65-6005#15008 Paccar Rubber Isolated Pin and Bushing #B65-1012#15009 Paccar Rubber Isolated Pin and Bushing #B65-1006#15015 Mack Rubber Isolated Pin and Bushing #10QK254M2 or BJ-1469-1
LEAF SPRING & SHACKLE PIN SOCKETSRemove and install even the most stubborn threaded leaf spring and shackle pins on Volvo and Mack suspensions. Refer to dimensions to ensure compatibility.
• CNC machined from billet chrome-moly steel
• Black oxidize finish for extended durablity
• 1” Drive
15103 15101 15100
At over 75% less weight than our closest competitor, the Tiger King Pin Press provides a much more effective, and user friendly design for ease of use, requiring only one technician to operate!
Designed for use on straight and tapered kingpins, and will accommodate sizes from 7/8” to 2 5/32” kingpins.
HEAVY DUTY MECHANIC'S KIT20201The Heavy Duty Mechanic Combo Kit comes with a variety of popular tools used for servicing driveline, steering and brake components on class 7/8 trucks and buses. Shipping Weight: 32 lbs.
Includes:• 10102 Heavy Duty Universal Joint Puller
• 10201 Bearing Cup Installer - Traditional Bolt Retained
• 10301 7/8" Tie Rod End Remover
• 10406 Manual Slack Adjuster Puller
• 10407 Rockwell Automatic Slack Adjuster Puller
HEAV
Y DU
TY TRUCK
117
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
WHEEL WEIGHTS
FOR UP-TO-THE-MINUTE PRODUCTAPPLICATIONS CHECK OUT:
WWW.STEMPF.COM ANDSTEMPFONLINE.COM!
118
HEA
VY
DU
TY T
RUCK
See Application Guide, pages 8-52, for specific models and years
WHEEL WEIGHT HAMMER & REMOVER WITH HEEL PLATE1200HP• Eliminates scratched rims • Quality - heavy duty construction• Made in the USA (patents pending)• Safety - never pinch fingers or hands again• Economical - with replacement parts
25K PLIERS25KThis light-duty wheel weight installation and removal tool is the industry standard for uncoated lead clip-on style wheel weights. Plastic-coated handles provide a better grip.
PT7 PLIERSPT7Primarily used for the large truck steel clip-on wheel weights. Designed by mechanics for mechanics. The “Clip Claw” design is ideal for removing weights that have minimum tire/wheel flange clearance. Extra-heavy hammer weight simplifies the installation of large weights. Plastic-coated handles provide a better grip and a comfortable feel.
TRUCK WHEEL WEIGHT REMOVAL TOOLTR10This heavy-duty, hardened-steel removal tool even makes taking off the toughest weights easy.
HEAVY DUTY TURNPLATE REPLACEMENT 1/2” NYLON BALLS
41-50-1188 Balls - Covers both Heavy Duty Plates
SHOCKS FOR TRUCKS, TRAILERS & BUSES
Gabriel® is one of the oldest and largest suppliers of Heavy-Duty (HD) shocks and struts, offering exceptional products, coverage and breadth of line.
Fleetline™83000/85000/85300/
BRASS VALVES
FOR UP-TO-THE-MINUTE PRODUCTAPPLICATIONS CHECK OUT:
WWW.STEMPF.COM ANDSTEMPFONLINE.COM!
HEAV
Y DU
TY TRUCK
119
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
STEMCO Kaiser QWIK KIT™
THE “TRUE” NO-REAM KingPin Kit Only the STEMCO Kaiser Qwik Kit™ gives you the performance of steel on steel. In fact, our proprietary High-Chrome, High-Carbon tool steel is the only material that can withstand the constant turning and pounding placed on a steering knuckle and axle over the life of the vehicle.
STEMCO Kaiser QWIK KIT™
For Longer Life And Less Maintenance• 300% More Grease!• Grooved Pin Allows Grease To Lubricate Bearing!• Drive Past Your Next 3 King Pin Jobs!• Install in Half The Time with Half The Effort!• No Ream Installation!
QWIK KIT™
AXLE OE KIT OE PIN QWIK KITCODE NUMBER SPECS NUMBER
E1200I/W, E1320I/W 328344, 823078 1.794 X 9.05 K122E
FF961, FF941 R201315 1.794 X 10.40 K961L
FF981 R201472 1.794 X 8.87 K981R
02ADD, 02ADG, 02ADN, 02ADP 1668411C91, 120KK100 1.921 X 9.87 K120I
02ADA, 02ADB, 02AEM BEFORE 10/2002 166027C91, 101KK111 1.359 X 7.97 K102I
E1202I/W, E1322I/W, E1462I/W 328347, 328349 1.872 X 9.05 K147E
EFA12F4 806355 1.625 X 9.19 K120E
FH946 R201420, R201424 1.794 X 9.19 KH946R
02AEM AFTER 10/2002 329182 1.359 X 7.97 K103S
FG931 R201319, R201425 1.794 X 10.40 KG931R
FL931 R201312 1.999 X 11.22 KH931L
MFS08 R201474 1.500 X 7.50 K80R
F050 THRU 1985 722166 1.179 X 6.36 K55G
FF931, FF941 R201307 1.794 X 10.40 K931L
FA523, FA532 301SQ47 1.625 X 7.46 K566
F050 1986 & NEWER 12472161 1.179 X 6.36 K566
FC941 R201318 1.500 X 8.93 K941R
E1460I/W 328343, 328345 1.872 X 9.05 K146E
EFA18F4, EFA20F4 811525, 328432 1.872 X 9.97 K180E
02ADE 140KK100, 329022 2.046 X 10.12 K1405
AXLE OE KIT OE PIN PLUS KITCODE NUMBER SPECS NUMBER
E1200I/W, E1320I/W 328344, 823078 1.794 X 9.05 70.122.05
FF961, FF941 R201315 1.794 X 10.40 70.961.12
FF981 R201472 1.794 X 8.87 70.981.18
02ADA, 02ADB, 02AEM 166027C91, 1.359 X 7.97 70.102.09BEFORE 10/2002 101KK111
EFA12F4 806355 1.625 X 9.19 70.120.05
FF931, FF941 R201307 1.794 X 10.40 70.931.12
02ADD, 02ADG, 02ADN, 02ADP 1668411C91, 120KK100 1.921 X 9.87 70.120.09
FL931 R201312 1.999 X 11.22 78.931.12
02AEM AFTER 10/2002 329182 1.359 X 7.97 70.103.19
E1202I/W, E1322I/W, E1462I/W 328347, 328349 1.872 X 9.05 70.147.05
F050 1986 & NEWER 12472161 1.179 X 6.365 70.056.07
E9HZ-3111C 1.430 X 8.25 70.076.06
FA523, FA532 301SQ47 1.625 X 7.46 70.533.13
E9HZ-3111A, 1.794 X 10.07 70.942.06
F0HZ-3111A
EFA18F4, EFA20F4 811525, 328432 1.872 X 9.97 70.180.05
FA-139, FA-337, FA-339, FA-342, 588808C91, 1658934C91 1.609 X 9.66 70.140.09FA-343 ALL AFTER 1981
Top QWIK KIT King Pin Kits
STEMCO Kaiser PLUS KIT™
Better Fit, Less Down Time & Better QualitySTEMCO Kaiser has been offering a “no-ream” bi-metal king pin kit for over ten years, yet many customers were asking for a better fit than the product provided. That was until now! With improvements to our PLUS Kit, we now offer pre-sized bi-metal bronze bushings with the fit of a tightly reamed king pin installation.
STEMCO Kaiser PLUS KIT™
For No Ream Installation & Perfect Fit• Pre-sized Bronze Bushings• No Need to buy Reamers• Fit as Good as “Reamed”• Install Faster than Reaming• Least Expensive King Pin Installation
PLUS KIT™Top PLUS KIT King Pin Kits
120
HEA
VY
DU
TY T
RUCK
See Application Guide, pages 8-52, for specific models and years
MADE IN THE USA
Call Stempf to check pricing and order these products!
HEAV
Y DU
TY TRUCK
121
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
MADE IN THE USA
Call Stempf to check
pricing and order
these products!
122
For Quick Item Information visit: WWW.STEMPF.COM
TOO
LS
GM TRUCK/VAN CAM ADJUSTING TOOL45940This wrench makes it easy to adjust the upper control arm cams on Chevy Express and GMC Savana vans. The tool surround surrounds the entire perimeter of each cam to provide a solid no slip means to reach the hard-to-reach and often rusty OE cams.
FORD VACUUM FRONT HUB RELEASE TOOL SET7932Here’s the equipment you need to safely remove the plastic vacuum hubs on Ford pickups. Standard tools won’t work for the job, but this set has special clips that slip into slots on the hub to release it.
For use on 1998 to current 4WD Ranger, F-250, and F-350 models with vacuum front hubs.
FORD AXLE SHAFT SEAL INSTALLERS
Correctly installs the seal onto the axle shaft and into the wheel knuckle,
preventing front hub vacuum leaks that would cause the 4WD to not engage.
6697• Works on 2005-newer Ford F-250, F-350, 4X4s having the vacuum-operated front axle.
GM CAMBER/CASTER TOOL83785Save time and make adjusting front camber and caster a one-person job on popular GM platforms with this turnbuckle design tool. Simply attach the tool to the front lower control arms and dial in finite changes on GM mid-size SUV’s, the Chevy SS and the Cadillac CTS/CTS-V.
COLORADO/CANYON 4WD ALIGNMENT SOCKET45938Aligning these trucks can be difficult because it is impossible to access the head of the cam bolt to adjust alignment angles. This special grooved socket fits over the end of the bolt allowing the technician to turn the alignment cams to change alignment angles after loosening the lock nut. This socket makes aligning these 4WD trucks much quicker and easier.
6695
• Works on 1998-2004 Ford F-250, F-350, F-450, and F-550 4X4s having the vacuum-operated front axle.
123
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
TO
OLS
LARGE INNER TIE ROD TOOLLIS54500• Fits a lot of newer trucks and SUVs• Fits both domestic and import• Longer socket than the 45750 fits newer trucks and SUVs• Of this style inner tie rod tool, the only one on the market• Patent design has a retainer ring that makes sure the wrench won’t slip
BRAKE PAD GAUGE6596• The 6596 Brake Pad Gauge allows for a definitive measurement of brake pads to determine remaining life.• Unique design allows for measurement on the vehicle without the removal of any components in most cases (wheel assembly or brake caliper).• Quick reference of brake pad condition via color code scale.• Attain measurement without removing any parts from the vehicle.
AUTOMOTIVE UNIVERSALJOINT PULLER10105U-Joint Puller designed to fit cars, light- duty trucks, and farm machinery. Fits u-joints with bearing cups 1.0” to 1.25” O.D”
STEERING WHEEL LEVELWA0948The WA0948 Steering Wheel Level is used to assure a level steering wheel during front end toe check andany front end alignment procedure.
SUPER-DUTY PITMAN ARM PULLER
Removes & installs inner tie rods with inaccessible wrench flats on many trucks and SUVs. Fits Toyota, Nissan, Ford, Lincoln, Mercury, & Chevrolet truck & SUV applications. Four crows foot sizes 33.6mm, 1-7/16”, 38.4mm, & 42mm.
6497• Works on 2005 and newer Ford F-250/ F-350 4x4 Super Duty trucks.• Allows the Pitman arm to be removed from the steering gear the steering gear is still in the vehicle.• Two clamp bolts lock the jaws on the Pitman arm, ensuring a solid grip.• Maximum jaw spread is 3-1/4”.
• Eliminates dangerous vice and socket, or hammering methods.• Removes sealed u-joint cups in minutes.• Does not damage the driveshaft, yokes, joints, or bearing cups.• Heavy-duty construction.• One piece unit (no assembly required). No bolts, no cables, and no adapters.• Shipping Weight: 4 lbs
AUTOMOTIVE SERVICE KIT20476KIT INCLUDES:• 10104 Universal Joint Puller• 10105 Universal Joint Puller• 10202 Bearing Cup Installer• 10850 Yoke Puller• 14001 Torsion Bar Unloader• 70300 Snap Ring Pliers• Shipping Weight: 29 lbs
HEAVY DUTY MECHANIC’S KIT20401KIT INCLUDES: • 10102 Heavy Duty Universal Joint Puller• 10201 Bearing Cup Installer - Traditional Bolt Retained• 10301 7/8” Tie Rod End Remover• 10409 Gunite, Brunner, and Bendix self-adjusting slack puller• 10410 Haldex self-adjusting slack puller• Shipping Weight: 35 lbs
124
For Quick Item Information visit: WWW.STEMPF.COM
TOO
LS
Applications:Chevrolet Trailblazer 2002-10GMC Envoy 2003-10Buick Ranier 2004-07Oldsmobile Bravada 2003-04Chevrolet SSR 2000-07Saab 9-7x 2005-09Isuzu Ascender 2003-08
CHEVROLET TRAILBLAZER/GMCENVOY ALIGNMENT TOOL SET88-8929
Applications: Adjustment Range:Dodge Ram 1500 2002-05 Camber -1° to + 1° Caster -1.5° to + 1.5°
2 per package
DODGE RAM CAMBER & CASTER ADJUSTING TOOL88-8928• Fast easy hook up • Adjusting jaws allow for smooth controlled adjustments
SPOT WELD CUTTERS For use with air tool to cut spot welds that hold OE alignment plates on top of strut towers
88-4519 (1/2")88-4520 (3/8")
3/8" Replacement Cutter No. 88-45211/2" Replacement Cutter No. 88-4522
125
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
TOO
LS
ROTARY FILESThese high-quality rotary files are great time-savers when elongating lower strut mount holes to install alignment kits. May be used with 1/4" or 3/8" electric or air drill. Also for dozens of other uses.
BT15 - 1/4"BT16 - 3/8"BT18 - 5/8"BT3 - Set of 3 ( one each size)
GM “W” BODY REAR TOE ADJUSTING TOOL
88-8923
Allows easy adjustment of factory rear toe system on 1990-02 Buick Regal, Chevrolet Lumina, Oldsmobile Cutlass Supreme & Pontiac Grand Prix.
ACURA, HONDA, MITSUBISHI IMPORT BALL JOINT ADJUSTING WRENCH88-1304
This 1-5/8" open-end wrench make adjusting the import ball joints a snap
Works with 41-229 through 41-550 ball joints
HEAVY DUTY CAMARO & FIREBIRD CAMBER TOOL
88-8925
For adjusting camber on 1993-02 Camaro and Firebird. Heavy Duty design allows both camber and caster adjustment with full vehicle weight on suspension - for safe, accurate, one-time adjustment.
FORD EXPLORER & MERCURY MOUNTAINEER CASTER/CAMBER ADJUSTING TOOL
For 2002 & Newer Models With New Design Suspension
88-8926
This tool allows you to slide the upper control arm in a positive or negative direction when adjusting camber/caster while maintaining live alignment reading.• Heavy duty construction• Easy installation
126
For Quick Item Information visit: WWW.STEMPF.COM
TOO
LS
CHRYSLER “LH” TOE ADJUSTING SET
88-7100A
This 3 piece tool set allows the technician to easily utilize OE front toe adjusters on 1994-97 Chrysler Cab-Forward vehicles, including Chrysler Concorde, Dodge Intrepid, Eagle Vision & Chrysler LHS.
Also available separately:88-7101 Tie rod socket
88-7102 Tie rod stabilizer
88-7103 Angled adjusting wrench
SET CONSISTS OF:NO. 88-7201 Tie Rod Sleeve AdapterNO. 88-7102 Stabilizer (same as in 88-7100A above)NO. 88-7203 Adjusting Wrench
CHRYSLER “LH” TOE ADJUSTING SET
88-7200A
Applications:Chrysler Concorde, New Yorker, LHS 1998 & newerDodge Intrepid 1998 & newerEagle Vision 1998 & newer
VW SHIM WRENCH
87530
Designed to remove the rear hub when installing 71520 and 71530 Series Volkswagen shims. This wrench is a must in assisting the installer when using these camber and toe shims.
127
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
TOO
LS
PEDAL DEPRESSOR
WA928
This unit produces constant pressure on the pedal. The adjustable steel plate extends the length of the bar.
STEERING WHEEL HOLDER
WA938
While doing alignments, this unit securely centers the steering wheel while the covered hooks and base prevent damage to the steering wheel or seat cover.
GM UPPER CONTROL ARM KNOCK-OUT TOOL
7491C
A necessary tool for removing inserts from upper control arm brackets. Services 1989-01 Chevrolet and GMC 1/2, 3/4 and 1 ton trucks with 2- or 4-wheel drive. Also works on ‘90-‘01 Chevrolet Astro and GMC Safari vans with all-wheel-drive.
FORD CAMBER/CASTER BUSHINGREMOVAL TOOL
88-501
Uniquely designed to remove all Ford 2WD & 4WD OE alignment bushings, as well as most aftermarket bushings. Includes 4 replaceable jaws that lock into place to virtually eliminate breakage problems during removal.
128
For Quick Item Information visit: WWW.STEMPF.COM
TOO
LS
INNER TIE ROD SOCKET TOOL
45750
Works on inner tie rods with inaccessable wrench flats.Contains 11/4", 15/16", 13/16", 17/16" and 33.6 mm crow’s feet.
POSITIVE LOCK UNIVERSAL INNERTIE ROD SOCKET TOOL
88-7301• Unique design allows fast and easy replacement of inner tie rod without removing the rack & pinion
• Fits domestic and foreign vehicles with inner tie rods up to 42mm outer diameter
• Adjusts to fit all styles of inner tie rods (round, square, flat or hex) without slipping
FORD SUPER-DUTY TRUCK TIE ROD TOOL
88-1700 Extreme-Duty design muscles even the most stubborn and corroded tie rod sleeves on these popular Ford trucks. A “must have” tool for alignment and tire shops!
• Accurately machined to fit the large toe adjusting sleeve and the “steer ahead” sleeve• Wide jaw fits into split in sleeve for positive grip without slippage or tearing of sleeves• Long lever arm helps break loose stubborn, rusted sleeves• Full 360° rotation
Applications:Super-Duty F250, 350, 450 1999-Upand 550 2WD and 4WD
H.D. TRUCK TIE ROD SOCKET
TRS300
3/4" Square Drive Heavy Duty Tie Rod Socket is designed for use on 9,000 through 20,000 pound axles or classes 7 & 8. The U-shaped slot measures 1-7/8" x 1-1/2" with an inside diameter of 3" in the socket. Length is 3-1/2".
129
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
TOO
LS
TIE ROD ADJUSTING TOOL
ATC1000
Features 360° sleeve rotation without removing tool from tie rod. The ATC-1000 has an 8 position feature for proper tool location and works on all car models, including 1-ton pick-ups, midsized trucks and large vans.
CHRYSLER LH TIE ROD SLEEVE
LH2001This product is designed to replace the existing knurled toe adjusting sleeve located on the tie rod on either side of the front steering arms.
Includes:
4 tie rod adjusting tools for: • compact cars with 3/4" diameter adjusting sleeves• full-size cars with 7/8" diameter adjusting sleeves• light trucks with 1-1/8" diameter adjusting sleeves• Ford 3/4-ton and 1-ton trucks with 1-13/16" diameter adjusting sleeves
Pitman arm adjusting tool for:
• Ford 3/4-ton and 1-ton trucks with 1-7/16" diameter adjusting sleeves
Also includes a custom storage case
TIE/ROD PITMAN ARM ADJUSTING TOOL SET 6275
FOR UP-TO-THE-MINUTE PRODUCTAPPLICATIONS CHECK OUT:
WWW.STEMPF.COM & STEMPFONLINE.COM!
130
For Quick Item Information visit: WWW.STEMPF.COM
TOO
LS
PITMAN ARM PULLER6496
Applications: Lincoln Navigator 1998-03 Ford F-150 and Expedition 1997-04 Oldsmobile Bravada 1991-01 S10/S15 GM Trucks and Blazers 1991-05 Suburban 1992-06 GM and Chevy 1/2-, 3/4-and 1-ton pickups 1988-06 Chevy Tahoe and GMC Yukon 1992-06
• New patented design saves time, increases productivity• Labor intensive removal of steering sector is now unnecessary• Compact design of puller allows easy access to the Pitman arm• Live center on forcing screw and easy use of a standard wrench results in less effort required• Works on most domestic SUVs and pickups• Tool is forged steel for durability and long life• Pays for itself on its first job
Cuts removal time from
3-1/2 hours to 40 minutes!
BALL JOINT SERVICE SET
7249• All-in-one set includes tools for complete ball joint, U-joint, and heavy-duty truck brake anchor pin service jobs
• Easily removes and installs press-fit upper and lower ball joints
• Packaged in plastic storage case
BRANICK STRUT SPRING COMPRESSOR
This model has all the features you expect from Branick and more. It’s the answer for all your strut work.
97400
The 97400 can handle the heaviest coil-over-shocks, the Ford F-150 and even the Toyota RAV-4 without need for additional adaptors. Extra long springs? Bring ‘em on! Long, short, narrow or angled, the 97400 will easily do the job!
And we’re listening too...We opened up the front for easier access and added longer handles for extra torque. We also have an optional benchmount and mobile cart.
131
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
TOO
LS
MASTER BALL JOINT KITS
6559
6529
6539
7248
7249
8031
6530
INTERMEDIATE BALL JOINT KITS
STARTER BALL JOINT KITS
132
TOO
LS
For Quick Item Information visit: WWW.STEMPF.COM
1. Remove 3 lug nuts & replace with extensions.
2. Bolt the plate to the face of the wheel.
3. Attach the aligner header to the plate.
TRU• Aligns all wheels including custom, tuner and other difficult-to-align wheels, even bent wheels• Eliminates head-mounting problems caused by tire “rim guards”• Works with all current alignment machines, new or old• Aligns with greater accuracy• Eliminates damage to expensive wheels that can be caused by mounting alignment heads directly to the wheel• Is simple and intuitive to use• Is much less expensive than buying a new alignment machine; it allows your technicians to do a better job at a fraction of the cost
Wheel Alignment Solutions!
Don’t turn away those high-dollar custom wheel alignment jobs. And don’t risk damaging those very
expensive wheels.
ECONOMY ADJUSTABLE MAGNETICCAMBER GAUGE
88-9480
This portable, accurate magnetic gauge attaches firmly to spindles or rotors, and is the perfect tool to measure camber change when doing strut work or when truck alignment bushings or other camber kits are installed.
WHEEL ALIGNMENT ADAPTER SYSTEM
UNIVERSAL WHEEL CLAMPS
WC 8069-PASSENGER CARTWC 8070-LIGHT TRUCK
Specially designed for use with magnetic caster/camber gauges.
133
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
TOO
LS
BRAKE ROTOR CHATTER SILENCERSThis new type silencer fits on top of the cutting tools and IS APPLICABLE ON ALL ROTOR LATHES. Pressure is adjustable for complete elimination of rotor chatter. No tools are needed for quick & simple installation.
BD70 - For use with all brake lathes.BD71 - For on the vehicle lathes.
GASKET TYPE SILENCER - LARGE
199-6Large black rubber gasket-type silencer band for solid rotors. 1/4"x3/8"x9" diameter. Packaged 2 pieces.
SEGMENTED TYPE SILENCERSMade of the finest latex rubber tubing with four steel tubes to deaden vibration and eliminate chatter. Recommended for all disc resurfacing machines.
199-5 for 10"-13" vented Rotors199-5S for 6"-9" Vented Rotors
GASKET TYPE SILENCER - SMALL
199-4Small black rubber gasket-type silencer band for smaller solid rotors. 1/4"x3/8"x6-1/2" diameter. Packaged 2 pieces.
DISC SILENCER REPLACEMENT PADS
9183Made of a tough asbestos-free substance and easily snaps onto Ammco 7075 Disc Rotor Silencer. They are especially good for thin, non-vented type rotors such as Vega and import cars. Package of 2 pads.
Complete silencer kit 7075 includes silencer arms, mounting rod and pads.
??? ????13
4
For Quick Item Information visit: WWW.STEMPF.COM
VENTILATED ROTOR SILENCER
6920Made of natural rubber with lead weight inserts,it easily wraps around rotor after it is mounted on the lathe and effectively deadens vibrations and chatter. Fits any ventilated rotor.
DRUM SILENCER BAND
5280 Fits any passenger car drum. Made of natural rubber, it wraps around the drum and is secured with a buckle. It is 1-3/4" wide and 72" long.
TRUCK DRUM SILENCER BANDS
Wide solid silencer bands made from natural rubber.
BD81 - Length 6-1/2’ x 2-7/8" x 1/8"BD82 - Length 5’ x 2-7/8" x 1/8"
ADJUSTABLE VENTILATED
ROTOR SILENCER
BD98This adjustable silencer is made of latex tubing with lead weight implants. Durable, oil resistant latex with adjustable hook will give you a longer-life silencer.
STRETCHER SILENCER BAND
BD99This patented design made of glowing latex rubber effectively dampens turning noise and vibration. For use on solid or vented rotors. 3/16" x 3/8" x 3/4" diameter.
TOO
LS
135
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
COMPLETE ADAPTER PLUS SYSTEM
RM7315This kit will do almost all hubless work including: passenger car hubless rotors and drums, and light truck hubless drums and rotors. All composite rotors. Light and medium truck drums and rotors up to 5-3/4" center hole size.
RM436RM438
RM439 RM435
RM7300
DELUXE DRUM, ROTOR & COMPOSITE KIT
RM7373This system is totally interchangeable so you can add on as your needs increase. This kit will do all of your:
• Hubless rotors up to 4" center hole size• Hubless drums up to 4" center hole size• 1/2 Ton trucks up to 4" center hole size• All truck and car composite rotors
DODGE RAM ROTOR ADAPTOR8495Turn late model 3/4 and 1 ton rotor assemblies quickly and easilyFor ‘92 and up GM 4x4 or ‘94 and up Dodge Ram. This precision adaptor allows you to mount 3/4- and 1-ton rotor assemblies quickly and easily without disassembly. No more wasted shop time breaking down rotor assemblies or waiting for outside machine shops to perform this service. Our adaptor locates from the rear bearing flange - which is the only accurate way to machine these rotors. Assembly then mounts to any 1" arbor brake lathe. Includes one-piece adaptor and 4 bolts.
HUBLESS ADAPTER KIT
RM7300Makes servicing the hubless rotors quick and easy. Will fit any 1" arbor and allows quick changes of rotors and more accurate turning without vibration. STANDARD SIZE HUBLESS ADAPTOR SET FOR USE ON PASSENGER CARS- 2-5/32" to 3-15/16". Replacement tool part no. RM25110
QUICK-CHUK HUBLESS ADAPTER
49880
• Works on ANY 1" Arbor • Mounts Almost All Foreign • Works with Any Standard & Domestic Hubless Rotors, Arbor Spacers or Nuts Drums and Flywheels• Works on Hole Sizes 2-1/8" - 3-3/4" • Versatile, Simple & Easy to Use
TOO
LS
136
TOO
LS
For Quick Item Information visit: WWW.STEMPF.COM
BRAKE LATHE REPLACEMENT PARTS
AMMCO # OUR # DESCRIPTION11227 11227 Holder Nut23682 97582 Brass Ring3085 3085 Spindle Boot3086 97086 Feed Screw Boot3087 97087 Cross Feed Boot3101 97101 1" Arbor3102 97102 Arbor Nut
FMC # OUR # DESCRIPTION90043 98043 1" Arbor 20474 Arbor Nut
ACCUTURN # OUR # DESCRIPTION433735 98735 Way Cover433713 20474 Arbor Nut
FOR UP-TO-THE-MINUTE PRODUCTAPPLICATIONS CHECK OUT:
WWW.STEMPF.COMAND
STEMPFONLINE.COM!
137
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
CARBIDE BRAKE LATHE INSERTS & TOOL HOLDERS
OEM PART # OUR TIP BOX QTY.
OUR TOOL HOLDER APPLICATION
ACCUTURN
OEM # N/A433796190
060-10 10 190 For Accuturn combination disc/drum lathe models 8911, 8922, 8944 or 8989
AMMCO 6914-109872 41 10 41T
Most Popular Ammco Negative Rake Bit with Center Hole and 12 Cutting Edges. Models 1000,1001, 3000, 3850, 4000, 4100, 7000, 7700 and On-Vehicle Brake Lathe 710.
AMMCO6419-101070110702
41 10 10701 (RH)10702 (LH)
Right & left hand Toolholder assembly for model 7000 disc rotor lathe and 3000, 4000 & 10702 (L.H.) 4100 drum lathes. Complete w/carbide insert #41 & insert locking screws
FMC804884049490495
42 10 42R & 42L
FMC/John Bean/Barrett Positive Rake Car-bide Bits with .020" RadiusModels 67BSD, 67DLX, 67GSA, 69DLX, 701ECF and 601PF Models 400, 500, 600 or Barrett Brake Lathes
HUNTER V302-07-167 702-10 10 For Hunter Disc Lathe models 201 & 205. 3 Cutting Edges.
KWIK-WAY 109-1092-23 802-10 10
Kwik-Way/Snap-on Positive Rake Carbide Bit with 3 Cutting Edges For SDL, DL,850 Disc Lathe & ROTUNDA Lathes Snap-on/Kwik-Way On-The-Car Lathe Model 108-0005-04
PRO CUTVGB
OEM# 50-701 CB50-741 10 Pro-Cut/VBG Positive Rake Carbide Bit with
3 Cutting Edges for Toolholder 29005
STAR(Triangular) CD-60 41 10
For Star model 1776 Disc Brake lathe. Trian-gular carbide insert #46 has (6) cutting edges by indexing the insert.
VANNORMAN 129687 45 10
For Van Norman Disc lathe models 204D, 204C, 204S, 205DC & 415. 3/8" inscribed circle.
BRAZED CARBIDE TOOLS
PART # OEM # MFR. DESCRIPTION
K41 2042 AllRight hand for Van Norman DRB-204, 204H, 205, 300, 300H, 302, 302H, 303, 333 & 333H drum & Ammco drum lathes. 3/8" x 1/2"
K42 2043 All Left hand tool for use on all above mentioned lathes. 3/8" x 1/2" square.
573 N/A Van Nor-man
For heavy-duty Ammco & Van Norman truck lathes. 5/8" square
5725 5725 Ammco For 5000 & 6000 lathes. Van Norman 310, 404 & 405 lathes. 5/8" square
4725 4725 Ammco For Ammco 3000, 4000, 4100, 5000, 6000 & 7700 lathes. 1/2" square
4726 4726 Ammco For Ammco 5000 & 6000 drum lathes. 1/2" square.
5720 5720 Ammco For Ammco 5000 & 6000 & Van Norman 310, 404 & 405. 5/8" square.
TOO
LS
138
AC
CES
SOR
IES
For Quick Item Information visit: WWW.STEMPF.COM
REPLACEMENT ROUND
CARBIDE INSERTSCT-10Box of 10
UNIVERSAL CV BOOT ECONOMY
BULK-PAK
614-001-12
Contains 12 complete 614-001 Universal CV Boot Kits.
UNIVERSAL CV BOOT KIT
614-001
• Fits foreign and domestic vehicles with outer CV joints up to 3.5"
• Replaces outer boots and inner CV boots• Original Equipment Quality• State-of-the-art patented design• Excellent abrasion and chemical resistance
SILICONE INNER BOOT KIT
614-002
for High-Temp applications!The silicone UF2002 fits inner CV joints to 3.5" where the CV boot is exposed to high temperatures.
FOR UP-TO-THE- MINUTE PRODUCT
APPLICATIONS CHECK OUT: WWW.STEMPF.COM & STEMPFONLINE.COM!
139
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
UNI-FIT™ RACK & PINION BOOTS
992022
The Uni-Fit™ Rack & Pinion Boot is the only steering boot that can be installed over the tie rod end. By using the included cone, the boot can be correctly positioned without removing the tie rod. This speeds up installation and eliminates the need for realignment. With neoprene construction and Uni-Fit™ design, this boot will fit most domestic and foreign applications.
Note: If replacing a boot on a rack and pinion assembly that uses a vent tube, replace both boots and discard the tube.
UF2022 Kit includes:2 - Uni-Fit™ Rack & Rinion Boots2 - Clamp Sets1 - Installation Cone1 - Instruction
FOR UP-TO-THE-MINUTE PRODUCTAPPLICATIONS CHECK OUT:
WWW.STEMPF.COM ANDSTEMPFONLINE.COM!
AC
CESSO
RIES
140
AC
CES
SOR
IES
For Quick Item Information visit: WWW.STEMPF.COM
GM REAR SPINDLE BOLTSSB10040• 10 x 4 mm for GM rear hub & bearing bolt replacement• 5mm longer than OE screws for rear shim installation• 16 pieces per box
UNIVERSAL COIL SPRING SPACERSProduced from high-quality rubber for rugged use. They are flexible enough to be cut off and reshaped to a tighter radius when installed under smaller diameter coil springs. Fit a wide range of vehicles.
1921 - Rubber coil spring spacer - 3/4” thick1922 - Rubber coil spring spacer - 9/16” thick
1921 1922
VISUALINER REPLACEMENT BULBSCHK150 watt long life lamp for 3 lamp visualiners.
HUNTER “LITE-A-LINE” REPLACEMENT BULBSCEM120 watt 120 volt lamp.FDX100 watt 12 volt hi- intensity lamp.
141
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
ALUMINUM COIL SPRING SPACERS - CARS/VANSProper Alignment Requires Correct Spring HeightCoil spacers come in various thicknesses for front & rear coil springs on most cars and trucks. Coil spacers allow shock absorbers to operate through their normal range for longer life and proper response ratios. Spacers restore car trim height for correct front-end component relationships and for like-new ride and appearance. They improve stability. When installed in front, car height is raised approximately 2-1/2 to 3 times spacer thickness. Engine weight must be considered.
Rear installation on housing raises vehicle approximately 1-1/4 to 1-1/2 times spacer thickness.
1102 1103 1104 1105 1106 1302 1303Front Rear
Make/Model yeartop or bottom 3/8" 1/2" 5/8" 3/4" 1" 1/2" 1" 1-1/2"
BUICKApollo 73-74
1975B B
1102 1702
1103 1703
1104 1704
1105 1705
1106 1706
Centurion 71-73 71-73
B T or B
1702 1703 1704 1705 1706 1621
1622
1620
Century RWD 73-76 73-81 77-81
T or B B T or B
1702
1703
1704
1705
1706
1621 1621
1622 1627
1620 1628
Century FWD 82-96 82-96
B T
1102 1103 1104 1105 1106 1621
1627
1628
Electra/LeSabre 39-64 39-84 54-64 65-76 77-84 85-94
B B T T or B T or B B
1702 2006
1703 2007
1704
1705
1706
1601 1621 1621 2008
1602 1622 1627 2009 (.75")
1603 1620 1628
Station Wagon Only 79-89 T or B 1621 1627 1628
Regal RWD 73-76 73-87 77-87
T or B B T or B
1702
1703
1704
1705
1706
1621 1621
1622 1627
1620 1628
Riviera 79-85 T 2008 2009 (.75")
Roadmaster 91-96 91-96
B T or B
1702 1703 1704 1705 1706 1621
1627
1628
Skyhawk RWD 75-80 B 1102 1103 1104 1105 1106 1621 1627 1628
Skyhawk FWD 82-89 83-88
T B
1302
1303
1621 1627 1628
Skylark RWD 64-66 64-72 67-72 75-79
B B T or B B
1102 1702
1103 1703
1104 1704
1105 1705
1106 1706
1601 1621
1602 1622
1603 1620
AC
CESSO
RIES
142
AC
CES
SOR
IES
For Quick Item Information visit: WWW.STEMPF.COM
ALUMINUM COIL SPRING SPACERS - CARS/VANS
Front Rear
Make/Model yeartop or bottom 3/8" 1/2" 5/8" 3/4" 1" 1/2" 1" 1-1/2"
BUICK cont’dSkylark FWD 80-85
80-94 86-96 95-96
B T B T
1102 1302
1103 1303
1104 1105 1106 1621 2008
1627 2009 (.75")
1628
Special 64-66 64-69
B B
1102
1103
1104
1105
1106
1601 1602 1603
CADILLACAllante 87-88 B 1702 1703 1704 1705 1706
Brougham 79-92 79-92
B T or B
1702 1703 1704 1705 1706 1621
1627
1628
Calais 65-76 65-76
B T
1702 1703 1704 1705 17061621 1622 1620
Cimarron 82-86 83-86
B B 1302 1303
1621 1627 1628
Deville RWD 54-64 54-71 61-64 65-76 65-84 77-84
T T B T or B B T or B
2006 2063 1702
2007 2064 1703
2065 1704
1705
1706
2060 1621 1621
1622 1627
1620 1628
Deville FWD 85-93 B 2008 2009 (.75")
El Dorado 74-78 79-85
T or B B
1621 2008
1627 2009 (.75")
1628
Fleetwood RWD 54-64 54-71 61-64 64-76 65-96 77-96
T T B T or B B T or B
2006 2063
2007 2064
2065
2060 1621 1621
1622 1627
1620 1628
Fleetwood FWD 85-92 B 2008 2009 (.75")
Seville 76-79 B 1702 1703 1704 1705 1706 2008 2009 (.75")
CHEVROLETBeretta 82-94 B 1302 1303 1621 1627 1628
Camaro 67-69 70-92 82-97
B B B
1102 1702
1103 1703
1104 1704
1105 1705
1106 1706
1621
1627
1628
Cavalier 82-94 83-94
B B 1302 1303
1621 1627 1628
Celebrity 82-9082-90
B T
1102 1103 1104 1105 11061621 1627 1628
1615 1616 1617 1618 1619 1620
143
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
AC
CESSO
RIES
ALUMINUM COIL SPRING SPACERS - CARS/VANS
1621 1622 1627 1628 1702 1703Front Rear
Make/Model yeartop or bottom 3/8" 1/2" 5/8" 3/4" 1" 1/2" 1" 1-1/2"
CHEVROLET cont’dChevelle / Malibu 64-66
64-72 67-76 73-83 77-83
B B T or B B T or B
1102 1702
1103 1703
1104 1704
1105 1705
1106 1706
1601 1621 1621
1602 1622 1627
1603 1620 1628
Chevette 76-87 76-87
B T
1302 13032011
1103 2013
1106
Chevrolet / Belair / Caprice / Impala
55-57 58-64 65-70 65-70 71-76 71-96 77-96
B T or B B T T or B B T or B
1102 1502 1512 1702
1103 1503 1513 1703
1104 1504 1514 1704
1105 1505 1515 1705
1106 1506 1516 1706
1503 1623 1703 1621 1621
1506 1624 1706 1622 1627
1625 1620 1628
Chevy II / RWD Nova
62-67 68-74 75-79
T B B
1502 1102 1702
1503 1103 1703
1504 1104 1704
1505 1105 1705
1506 1106 1706
Nova FWD 85-88 B 1702 1703 1704 1705 1706
Citation 80-85 80-85
B T
1102 1103 1104 1105 1106 1621
1627
1628
Corsica 87-94 87-96 95-96
B B T
1302
1303
1621 2008
1627 2009 (.75")
1628
Corvette 63-82 B 1702 1703 1704 1705 1706
Laguna 74-76 74-76
B T or B
1702 1703 1704 1705 1706 1621
1622
1620
Monte Carlo 70-72 70-76 73-88 77-88
B T or B B T or B
1102 1702
1103 1703
1104 1704
1105 1705
1106 1706
1621 1621
1622 1627
1620 1628
Monza 75-81 75-81
T B
1102 1103 1104 1105 1106 1621
1627
1628
Spectrum 86-89 86-89
B T
1702 1703 1704 1705 1706 1621
1627
1628
Vega 71-74 71-77 75-77
B B T
1102 1102
1103 1103
1104 1104
1105 1105
1106 1106
1621
1627
1628
CHRYSLERLaser 85-87 B 2012 (.75") 2013
Le Baron / GTS 82-94 B 2012 (.75") 2013
New Yorker / E Class 83-93 B 2012 (.75") 2013
144
AC
CES
SOR
IES
For Quick Item Information visit: WWW.STEMPF.COM
ALUMINUM COIL SPRING SPACERS - CARS/VANS
1704 1705 1706 1711 1714 1716
Front Rear
Make/Model yeartop or bottom 3/8" 1/2" 5/8" 3/4" 1" 1/2" 1" 1-1/2"
DODGE
Aries 81-89 B 2012 (.75") 2013
Charger 83-89 T 2002
Colt 81-86 87-90
TB
1103 1303
1106
Daytona 84-93 B 2012 (.75") 2013
Dynasty 88-93 B 2012 (.75") 2013
Lancer 85-89 B 2012 (.75") 2013
Omni 81-90 T 2002
Shadow 87-94 B 2012 (.75") 2013
Spirit 89-95 B 2012 (.75") 2013
400 82-84 B 2012 (.75") 2013
600 83-88 B 2012 (.75") 2013
FORDEscort / EXP 81-86
87-90 91-96
B B T
1302 1102
1303 1103
1104
1105
1106
1303 1615
1616
Fairlane 66-70 T 2011 2012 2013
Fairmont 78-83 78-83
B T
1502 1503 1504 1505 1506 2007
Falcon 60-70 T 2011 2012 2013
Ford / LTD / Crown Victoria
49-78 49-97 65-78 79-03 98-03
T B B T or B B
2006 1702
2007 1703 1903
1704
1705 1905
1706 1906
1614 1621
1615 1627
1616 1628
Granada 75-80 81-83 81-83
T B T
1502
2011 1503
1504
2012 1505
2013 1506
2007
LTD II 82-86 82-86
B T
1502 1503 1504 1505 1506 2007
Maverick 69-77 T 2011 2012 2013
Mustang / Mustang II 65-73 74-96 80-96
T B T
1102
2011 1103
1104
2012 1105
2013 1106
2007
Pinto 71-80 B 1102 1103 1104 1105 1106
Taurus 86-95 B 1702 1703 1704 1705 1706
Tempo 84-94 B 1502 1503 1504 1505 1506
145
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
AC
CESSO
RIES
ALUMINUM COIL SPRING SPACERS - CARS/VANS
2007 2008 2009 2012 2013Front Rear
Make/Model yeartop or bottom 3/8" 1/2" 5/8" 3/4" 1" 1/2" 1" 1-1/2"
FORD cont’dThunderbird 61-71
67-79 80-88 80-97 89-97
T B T B T
1702 1502
2008 1703 1503
1704 1504
2009 1705 1505
1706 1506
2007 2008
2009 (.75")
Torino 68-71 72-79 72-81 80-81
T T or B B T or B
1702
2011 1703
1704
2012 1705
2013 1706
1614 1621
1615 1627
1616 1628
LINCOLNContinental 49-60
61-78 70-79 80-81 82-84 82-84
T T B T or B B T
2006 1502
2008 2007 1503
1504
2009 1505
1506
1614 1621 2007
1615 1627
1616 1628
Lincoln 82-84 82-84
B T or B
1702 1703 1704 1705 1706 1621
1627
1628
Town Car 80-93 80-93
B T or B
1702 1703 1704 1705 1706 1621
1627
1628
MERCURYBobcat 75-80 B 1102 1103 1104 1105 1106
Capri 79-86 79-86
B T
1102 1103 1104 1105 1106 2007
Comet 60-77 T 2011 2012 2013
Cougar 67-73 74-79 80-97 80-88 89-97
T B B T T
1702 1502
2011 1703 1503
1704 1504
2012 1705 1505
2013 1706 1506
1614 2007 2008
1615 2009 (.75")
1616
Grand Marquis 79-97 79-00 98-00
B T or B B
1702 1703 1903
1704 1705 1905
1706 1906
1621
1627
1628
Lynx / LN7 82-84 82-87
B T
1302 1303 1615
1616
Marquis 82-86 82-86
B T
1502 1503 1504 1505 1506 2007
Mercury 52-78 52-82 66-78 79-82
T B B T or B
2006 1702
2007 1703
1704
1705
1706
1614 1621
1615 1627
1616 1628
Monarch 75-80 T 2011 2012 2013
146
AC
CES
SOR
IES
For Quick Item Information visit: WWW.STEMPF.COM
Front Rear
Make/Model yeartop or bottom 3/8" 1/2" 5/8" 3/4" 1" 1/2" 1" 1-1/2"
MERCURY cont’dMontego 68-71
72-76T B
1702
2011 1703
1704
2012 1705
2013 1706
1614
1615
1616
Sable 86-95 B 1702 1703 1704 1705 1706
Topaz 84-90 B 1502 1503 1504 1505 1506 1703 1706
Zephyr 78-83 78-83
B T
1502 1503 1504 1505 1506 2007
OLDSMOBILE Achieva 92-94 B 1621
Calais 85-91 B 1302 1303 1621 1627 1628
Custom Cruiser 74-92 74-92
B T or B
1702 1703 1704 1705 1706 1621
1627
1628
Cutlass / F-85 RWD 64-66 64-72 67-88 73-88
B B T or B B
1102 1702
1103 1703
1104 1704
1105 1705
1106 1706
1601 1621
1602 1627
1603 1628
Cutlass Cierra 82-96 82-96
B T
1102 1103 1104 1105 1106 1621
1627
1628
Firenza 82-88 83-88
B B 1302 1303
1621 1627 1628
Omega 72-74 75-79 80-84 80-84
B B B T
1102 1702 1102
1103 1703 1103
1104 1704 1104
1105 1705 1105
1106 1706 1106
1621
1627
1628
Starfire 75-81 75-81
T B
1102 1103 1104 1105 1106 1621
1627
1628
Toronado 71-78 79-85
T or B T
1621 2008
1622 2009 (.75")
1620
88 55-85 61-63 64-76 65-85 77-85 86-96
B T T or B T T or B B
1702 1703 2008
1704 1705 2009
1706 1601 1621 1621 2008
1602 1622 1627 2009 (.75")
1603 1620 1628
98 55-84 64-76 65-84 77-84 85-97
B T or B T T or B B
1702 1703 2008
1704 1705 2009
1706 1621 1621 2008
1622 1627 2009 (.75")
1620 1628
PLYMOUTH Acclaim 89-95 B 2012-.75" 2013
Champ 79-82 T 1103 1106
Duster 84-87 T 2002
Horizon 81-92 T 2002
Reliant 81-90 B 2012-.75" 2013
Sundance 87-94 B 2012-.75" 2013
PONTIAC Astre 75-81 B 1102 1103 1104 1105 1106 1621 1627 1628
ALUMINUM COIL SPRING SPACERS - CARS/VANS
147
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
AC
CESSO
RIES
Front Rear
Make/Model yeartop or bottom 3/8" 1/2" 5/8" 3/4" 1" 1/2" 1" 1-1/2"
PONTIAC cont’dBonneville / RWD Catalina
58-64 58-81 58-86 65-66 67-76 77-86 87-97
T or B T B B T or B T or B B
2006 1702
2007 1703
1704
1705
1706
1601 1631 1621 1621 2008
1602 1632 1622 1627 2009 (.75")
1603 1620 1628
Fiero 84-88 B 1302 1303 1103 1106
Firebird 67-69 70-92 82-96
B B B
1102 1702
1103 1703
1104 1704
1105 1705
1106 1706
1621
1627
1628
Grand Am 85-97 B 1302 1303 1621 1627 1628
Grand Prix 62-87 67-87
B T or B
1702 1703 1704 1705 1706 1621
1627
1628
Grand Safari Station Wagon
77-89 77-89
BT or B
1702 1703 1704 1705 1706 1621
1627
1628
Lemans RWD 64-66 64-72 67-76 73-81 77-81
B B T or B B T or B
1102 1702
1103 1703
1104 1704
1105 1705
1106 1706
1601 1621 1621
1602 1622 1627
1603 1620 1628
Lemans FWD 88-93 B 1302 1303
Phoenix 80-84 80-84
B T
1702 1703 1704 1705 1706 1621
1627
1628
Sunbird RWD 75-81 B 1102 1103 1104 1105 1106 1621 1627 1628
Sunbird FWD 82-94 B 1302 1303 1621 1627 1628
Ventura 71-74 75-79
B B
1102 1702
1103 1703
1104 1704
1105 1705
1106 1706
VANS - CHEVROLETAstro Except AWD
85-89 90-03
B B
1702 1703 1903
1704 1705 1905
1706 1906
G10,20,30 68-03 B 1702 1703 1704 1705 1706
P30 68-99 B 1702 1703 1704 1705 1706
Ventura 97-03 97-03
T B
1502 1503 1504 1505 1506 1621
1627
1628
VANS - DODGEB100, 150, 200, 250, 300, 350
71-01 B 1903 1905 1906
VANS - FORD Aerostar 88-97 B 1702 1703 1704 1705 1706 1619
Aerostar AWD 91-96 B 1502 1503 1504 1505 1506 1619
E100 69-74 T 1714 1716 1718
E150, 200, 250, 300, 350 69-03 T 1724 1726 1728
E150, 200, 250, 300, 350 75-91 B 1617 1618 1619
VANS - GMC Safari Except AWD
85-89 90-03
B B
1702 1703 1903
1704 1705 1905
1706 1906
ALUMINUM COIL SPRING SPACERS - CARS/VANS
148
AC
CES
SOR
IES
For Quick Item Information visit: WWW.STEMPF.COM
Front Rear
Make/Model yeartop or bottom 3/8" 1/2" 5/8" 3/4" 1" 1/2" 1" 1-1/2"
VANS - GMC cont’dG15, 25, 35 68-02 B 1702 1703 1704 1705 1706
Savana 96-02 96-02
T B
1502 1503 1504 1505 1506 1621
1627
1628
CHEVROLET 4x2El Camino 64-66
64-72 67-77 73-87 78-87
B B T or B B T or B
1102 1702
1103 1703
1104 1704
1105 1705
1106 1706
1601 1621 1621
1602 1622 1627
1603 1620 1628
C10, 20, 30 60-71 63-87
T or B B
1702
1703
1704
1705
1706
1601 1602 1603
C1500, 2500 Except HD
88-06 88-06
B T
1903 2008
1905 2009
1906
C3500 Except HD
88-01 88-01
B T
1903 2008
1905 2009
1906
S10 82-03 B 1702 1703 1704 1705 1706
Suburban 65-91 92-04
B B
1702 1703 1903
1704 1705 1905
1706 1906
Tahoe 92-04 02-04
B B
1903 1905 1906 1621
1627
1628
Trailblazer 02-07 B 1621 1627 1628
DODGE 4x2D50 79-81 B 1102 1103 1104 1105 1106
Dakota 86-03 B 1702 1703 1704 1705 1706
D100, 150, 200, 250, 300, 350
71-93 B 1903 1905 1906
Ramcharger 75-81 B 1903 1905 1906
Ram 50 82-90 B 1102 1103 1104 1105 1106
R1500, 2500, 3500 94-07 B 1903 1905 1906
FORD 4x2Courier 73-83 B 1302 1303
Excursion 00-04 00-04
B T 1724
1618 1726
1619 1728
Expedition 97-02 03-04
B T
1702 1702
1703 1703
1704 1704
1705 1705
1706 1706
F100, 250 65-70 T 1702 1703 1704 1705 1706
F100, 150, 250, 350 65-88 89-96
B B
1617 1618 1618
1619 1619
F100, 150, 250 LDUnder 6900 GVW
71-79 80-96 97-03
TTB
1702 1702
1703 1724 1703
1704 1704
1705 1726 1705
1706 1728 1706
F250, 350, Over 6900 GVW
80-04 98-04
T B
1724 1726 1618
1728 1619
Ranchero 68-71 72-79
T B
1702
2011 1703 1704
2012 1705
2013 1706
1614
1615
1616
Ranger 82-89 90-97 98-04
B B B
1702
1817 1703
1704
1618 1818 1705
1619 1819 1706
ALUMINUM COIL SPRING SPACERS - LIGHT TRUCK
149
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
AC
CESSO
RIES
ALUMINUM COIL SPRING SPACERS - LIGHT TRUCK
Front Rear
Make/Model yeartop or bottom 3/8" 1/2" 5/8" 3/4" 1" 1/2" 1" 1-1/2"
GMC 4x2C15, 25, 35 60-71 T or B 1601 1602 1603
C1500, 2500, 3500, Except HD
63-87 88-06 88-06
B B T
1702 1703 1903 2008
1704 1705 1905 2009
1706 1906
Envoy 02-07 B 1621 1627 1628
S15 82-03 B 1702 1703 1704 1705 1706
Sprint / Caballero 71-72 71-77 73-87 78-87
B T or B B T or B
1102 1702
1103 1703
1104 1704
1105 1705
1106 1706
1621 1621
1622 1627
1620 1628
Suburban 83-91 92-99
B B
1702 1703 1903
1704 1705 1905
1706 1906
Yukon 92-04 02-04
B B
1903 1905 1906 1621
1627
1628
Yukon XL 00-04 B 1903 1905 1906
CHEVROLET 4x4Suburban 1500 02-04 B 1621 1627 1628
Tahoe 02-04 B 1621 1627 1628
Trailblazer 02-04 B 02-07 B 1621 1627 1628
FORD 4x4Bronco 66-79
66-79 80-88 80-96 89-96*
B
T B T B
1714 1724 1617
1711 (1")
1716 1726 1618
1712 (1-1/2") 1718 1619 1728 1619
Bronco II 83-89 1990
B B
1817
1618 1818
1619 1819
Explorer 90-04 B 1817 1818 1819
F100, 150 66-79
66-79 80-88 80-96 89-96* 04-09
B
T B T B T
1714 1724 1617 1703
1704
1711 (1")
1716 1726 1618 1705
1712 (1-1/2") 1718 1619 1728 1619 1706
GMC 4x4Envoy 02-07 B 1621 1627 1628
Yulon/Yukon XL 02-04 B 1621 1627 1628
JEEP 4x4Cherokee XL 84-01 B 1702 1703 1704 1705 1706
Grand Cherokee ZJ 93-98 B 1702 1703 1704 1705 1706 1703 1706
Wrangler TJ 97-04 B 1702 1703 1704 1705 1706
* FORD - Measure length of stud above nut holding in sping and add 1/8” to measurement. That is the maximum thickness of spacer recommended without changing bolt. Discard plastic spring silencer.
150
OTH
ER L
INES
WE
OFF
ER
For Quick Item Information visit: WWW.STEMPF.COM
Truck and Jeep Accessories
151
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
OTH
ER LIN
ES WE O
FFER
Shocks & Struts build by a world leading OEM supplier: Calibrated to restore designed ride control performance.
HEAVY-DUTY TRUCK SHOCKSNo matter what you drive or
where, we’ve got you covered.
FCS AUTO: COMPLETE STRUT ASSEMBLIES
152
OTH
ER L
INES
WE
OFF
ER
For Quick Item Information visit: WWW.STEMPF.COM
Hellwig Pro-TouringTubular Rear Sway bar
One Lap 67 Camaro features Hellwig Motorsports’55705 Tubular Front Sway Bar
Front and rear sway bars sold separately
Hellwig Motorsports Solid Sway Bars are made from chromolysteel. Featuring an average tensile strength of 170,000 psi, oursolid sway bars are unmatched in strength and durability. All ofour solid sway bars feature forged ends – never welded - withHellwig’s proprietary end treatment to maximize strength. Forover 40 years Hellwig Motorsports solid sway bars have been theleader in strength, durability, and performance.
Hellwig Motorsports Tubular Sway Bars feature our latest designs and utilize high strength tubular DOM steel to maximize performance at half the weight of a solid bar. Hellwig quality shows in the details such as end treatments where the sway bar is tapered from round to flat to eliminate stress risers. Also, the ends are radiused for better clearance and a clean appearance. All bends are done on computer-controlled benders to provide consistent bends in a sway bar that fits right every time.
Best aftermarket investment for your motorhomeMost effective handling upgrade you can makeImmediate improvement will be felt in corneringEvery Hellwig Sway bar is designed specific for your vehicleGreatly improves cornering traction for safer driving and corning abilitiesOutstanding performanceEnables driver to handle wind, passing trucks, winding roads andeveryday driving with more confidence, control and stability
One Lap 67 Camaro features Hellwig Motorsportscustom solid rear sway bar
153
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
OTH
ER LIN
ES WE O
FFER
Suncore Air Springs are manufactured with Good Year air bags. Conversion
kits eliminate the “Service Air Suspension” light forever, and come
with a “Lifetime Warranty”. All shocks are warrantied against any
manufacturing defect.Compressors come with a 1 Year Warranty. Solenoids & O-Rings
should be replaced when necessary. Dryers should be replaced when
servicing the air springs to maintain the longevity of the original
compressor.
154
OTH
ER L
INES
WE
OFF
ER
For Quick Item Information visit: WWW.STEMPF.COM
For Tow Vehicles, Motor Homes, Slide-In Campers, Vans & SUVs
155
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
OTH
ER LIN
ES WE O
FFER
Now coversover 85% of
ALL vehicles in North America!
156
OTH
ER L
INES
WE
OFF
ER
For Quick Item Information visit: WWW.STEMPF.COM
TOP TEN NUMBERS!
All of our suppliers are carefully selected which allows us to use onlyquality components to assemble each unit. Every hub assembly that we produce is tested before it leaves our facility to ensure the highest quality possible. Our entire line is either made at our facility or is the OEM unit. We do not import from overseas just to fill in our line like many other companies. If you really want to make your customer happy, sell them a premium hub unit from WBI.• Premium Hub Units. • Manufactured & Assembled by an ISO 9001/2008 Company.• Manufactured using only the highest Quality components.
515036USA 513179USA 513121USA
513188-4USA 513137USA 513214USA
515058USA 515096USA 515024USA 513087USA
#1 #2 #3
#4 #5 #6
#7 #8 #9
#10
TOP TEN NUMBERS!
513179 515036 513188
513121 513137 513124
515058 515096 515024 515050
#1 #2 #3
#4 #5 #6
#7 #8 #9
#10
CRS OE Quality Hub Bearings are manufactured in a joint partnership with an OEM Manufacturer to provide our customers with a quality and dependable Hub bearing assembly.
STOP THE NOISE...GET RID OF THE
LIGHT!
157
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
OTH
ER LIN
ES WE O
FFER
158
OTH
ER L
INES
WE
OFF
ER
For Quick Item Information visit: WWW.STEMPF.COM
159
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
OTH
ER LIN
ES WE O
FFER
160
OTH
ER L
INES
WE
OFF
ER
For Quick Item Information visit: WWW.STEMPF.COM
161
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
OTH
ER LIN
ES WE O
FFER
162
CONVERSION CHART
1/32”
1/16”
3/32”
1/8”
5/32”
3/16”
7/32”
1/4”
9/32”
5/16”
11/32”
3/8”
13/32”
7/16”
15/32”
1/2”
17/32”
9/16”
19/32”
5/8”
21/32”
11/16”
23/32”
3/4”
0.031
0.063
0.094
0.125
0.156
0.188
0.218
0.25
0.281
0.312
0.343
0.375
0.406
0.437
0.468
0.500
0.531
0.562
0.593
0.625
0.656
0.687
0.718
0.750
1/16°
1/8°
3/16°
1/4°
5/16°
3/8°
7/16°
1/2°
9/16°
5/8°
11/16°
3/4°
13/16°
7/8°
15/16°
1°
1-1/16°
1-1/8°
1-3/16°
1-1/4°
1-5/16°
1-3/8°
1-7/16°
1-1/2°
0.0625
0.1250
0.1875
0.2500
0.3125
0.3750
0.4375
0.5000
0.5625
0.6250
0.6875
0.7500
0.8125
0.8750
0.9375
1.0000
1.0625
1.1250
1.1875
1.2500
1.3125
1.3750
1.4375
1.5000
0.8
1.6
2.4
3.2
4.0
4.8
5.6
6.4
7.1
7.9
8.7
9.5
10.3
11.1
11.9
12.7
13.5
14.3
15.1
15.9
16.7
17.5
18.3
19.0
3.75’
7.50’
11.25’
15.00’
18.75’
22.50’
26.25’
30.00’
33.75’
37.50’
41.25’
45.00’
48.75’
52.50’
56.25’
60.00’
1° 3.75’
1° 7.50’
1° 11.25’
1° 15.00’
1° 18.75’
1° 22.50’
1° 26.25’
1° 30.00’
INCHES DEGREES METRIC MINUTES OF ADEGREE
Phone: 1-800-328-4460Fax: 1-800-328-0240
www.stempf.com
163
NOTES
MEMBER
SERVICESPECIALISTSASSOCIATION