Key Features• Compact efficient athermal laser
resonator• Solid state technology for increased
efficiency and long life performance• High energy with low beam divergence• No significant warm-up time• Reduced heat-load: conduction or
air cooled• Continuous operation• Shock & vibration hardened
Areté’s AIRTRAC-LD Laser Designator is a ruggedized, high-shock laser with >50 mJ pulse energy. Full NATO STANAG 3733 capability in a very compact, lightweight and low power configuration. The athermal design provides high laser pulse energy over the full MIL-SPEC temperature range with low beam divergence and a full system weighing less than 1 lb. AIRTRAC-LD has established a new standard in size for lasers of this class.
OEM CompatibleIntegration
AIRTRAC®
LD Laser Designator
Areté | 9301 Corbin Ave. Northridge, CA 91324 | arete.comPOC: James Murray | [email protected] | (303) 532-8497
Business POC | Jay Rouse | [email protected] © 2018 Areté | All Rights Reserved
This product is listed under category XII(b) of the United States Munitions List. International Traffic In Arms Regulations (ITAR) requires a valid export license prior to technical or hardware shipments or transmissions of information.
Parameter Value Comments
Weight 250 g 110140 AIRTRAC-LD resonator with electronics
Wavelength 1.06 um
Output Energy >50 mJ
Pulse Width 10-25 ns
Pulse Codes STANAG 3733 I&II
Beam Divergence <500 urad Contact Arete directly for telescope options
Beam Winder (Jitter) ≤50 urad < 1/10 beam divergence
Max Rep Rate 21 Hz
Min Rep Rate 7 Hz
Pulse Energy Stability <5% typ
Missing Pulses <2 in 120 s
Secondary Pulses None
Power (Voltage) 18-33 VDC
Average Standby/Arm power 4 W
Average Power Draw (total) <30W < 25 W for 50 mJ @ 20 Hz for most operation
Peak Current <3.0 A
Initialization Time <5 s Power on to standby
Arm Time <100 ms Standby to arm
Laser Start Up Exception <1 s
Timing Jitter <10 ns
Hot Operation +70 C SW shutdown occurs @ 71 C
Cold Storage -46 C
Cold Operation -40 C
Operating Altitude ≤15,000 ft
Non-Operating Altitude ≤25,000 ft
AIRTRAC®-LD Laser Designator
AIRTRAC-LD with Beam Expander 110160
Areté | 9301 Corbin Ave. Northridge, CA 91324 | arete.comPOC: James Murray | [email protected] | (303) 532-8497
Business POC | Jay Rouse | [email protected] © 2018 Areté | All Rights Reserved
6
6
8
1 2
88
66
66
88
1 2 1 2
arete.com
AIRTRAC®-LD Laser Designator
Areté AssociatesPOC: James Murray | [email protected] | (303) 532-8497www.arete.comCopyright @ 2018 Areté Associates | All Rights Reserved
Parameter Value CommentsWeight 250 g 110140 AIRTRAC-LD resonator with Electronics
Wavelength 1.06 umOutput Energy >50 mJPulse Width 10-25 nsPulse Codes STANAG 3733 I&IIBeam Divergence <500 urad Contact Arete directly for telescope options
Beam Winder (Jitter) ≤50 urad < 1/10 beam divergence
Max Rep Rate 21 HzMin Rep Rate 7 HzPulse Energy Stability <5% typMissing Pulses <2 in 120 sSecondary Pulses NonePower (Voltage) 18-33 VDCAverage Standby/Arm power 4 WAverage Power Draw (total) <30W < 25 W for 50 mJ at 20 Hz for most operation
Peak Current <3.0 AInitialization time <5 s Power on to Standby
Arm Time <100 ms Standby to Arm
Laser start up exception <1 sTiming jitter <10 nsHot Operation +70 C SW Shutdown Occurs @ 71 C
Cold Storage -46 CCold Operation -40 COperating Altitude ≤15,000 ftNon-Operating Altitude ≤25,000 ft
AIRTRAC Standard Resonator 110140
2.72” x 1.94” x 1.25”250 g w/electronics
This product is listed under category XII(b) of the United StatesMunitions List. International Traffic In Arms Regulations (ITAR)requires a valid export license prior to technical or hardwareshipments or transmissions of information.
2.72” x 1.94” x 1.25”250 g w/electronics