Download pdf - Adjust it ii-assembly instructions

1 Assembly Instructions AdjustIt II Quick Start

• assembletheAdjustItIIframe,• assembletheprojectorarm,• attachtheprojectorarmtotheframeassembly,• attachtheInterwriteDualBoardtotheframeassembly,• mounttheframeassemblyonthewallor,• mounttheframeassemblyonthemobilestand.

The AdjustIt II Frame Assembly, Wall Mount and Mobile Stand Mount

Inthecasewherethewallisnotsolidenoughtoaccommodatetheweightofthewallmountassembly,anoptionalstandthatwilltransfersomeoftheweightfromthewallmounttothefloorcanbeaddedaspartofthewallmountinstallation.

Regardlessofwhichinstallationyouchoose,itmustbeperformedbyatleasttwopeople.Itwilltaketwopeople,oneateachendoftheInterwriteDualBoardtoliftitupontothebracketatthetopoftheframeassembly,forexample.And,itwillrequireatleastthreepeopletoperformthewallmountinstallation;twopeopletoholdtheframeassemblyonthewallwhileathirdpersonmeasuresandmarksitsplacement.

Thehardwareforputtingtogetherthemobilestand,theframeassembly,theprojectorarmandprojectormount,andattachingtheframeassemblytothemobilestandisincluded.Thehardwareforattachingtheframeassemblytothewallisnotincluded.Westronglyrecommendthewallinstallationbeperformedbyprofessionalswhocandeterminethestrengthofthewallandthehardwareneededtosecurelyanchortheframeassembly,theInterwriteDualBoardandtheprojectortothewall,andwhethertheextrawallmountstandforweakorfragilewallsisrequiredtooffsettheweightofawallmountinstallationandtheforceofadjustmentswhentheboardismovedupanddown.

TheAdjustItIImakesitpossibleforyoutomountyourinteractiveInterwriteDualBoardandsupershort-throwprojectoronaportablefloorstand,oronawall.Theseinstruc-tionsdescribehowto:


AdjustIt II Frame Assembly

Assemble the Frame

Frame – Back View

Cross Piece

Projector Arm Connector Plate

Projector Arm Receiver

Install the Frame Handle

1 Withthehandleplatefacingdown,lineuptheholesonthehandleplatewiththeholesonunder-sideofthecrossbar.Dropawasheroverendoftheboltandthreaditupthroughthehole.Tightenthenutontheendofthebolt,usingtheprovidedallenwrench.Repeatforthesecondbolt.

Frame Handle and Hardware

Handle in Place on Frame

Assemble the Projector Arm

Attach withWhite Knob

ProjectorGimbal Mount

Projector ArmExtension

Projector ArmRight Angle1 Attachtheprojectorgimbalmounttothe

projectorarmextensionusingthefourscrewsandwashersprovided.Usetheprovidedallenwrenchtotightenthescrews.

2 Slidetheprojectorarmextensionintotherightangleprojectorarm.

3 Runtheprojectorcablesthroughtheassembledprojectorarmsotheywill bereadytoplugintotheprojectorand intoapowersourcewhentheprojector armandprojectorareinplace.

4 Installtheassembledprojectorarm,sliding theendovertheroundreceiverontheprojectorarm

connectorplateandsecuringitwiththelargewhiteknob.

If you are going to attach an 85” DualBoard to the frame assembly, remove the projector arm connector plate using the provided allen wrench and lift off the cross piece. Re-move the end caps and insert them into the holes in the frame where cross piece was seated. Reattach the projec-tor arm connector plate.

3

Wall Mount Instructions

Assembly Instructions AdjustIt II Quick Start

Mount the Assembled AdjustIt Frame on the Wall

Threepeopleareneededtomounttheassembledframeonthewall.

1 Haveonepersonholdeachsideoftheassembledframe,whilethethirdpersonlevelsandmarkstheframe’spositiononthewall.

2 Attachtheframetothewall,usinghardwareappropriateforthewall.

The DualBoard AdjustIt II System should be mounted on the wall only by professionals who can identify the hardware required to attach the AdjustIt II System to the wall and who will recog-nize the need for the Weak Wall Stand if the wall is not sufficiently strong enough to support the weight of the AdjustIt II System and the force exerted by moving the board up and down.

1 WithonepersonholdingeachsideoftheDualBoard,hangtheboardoverthesquarebracket,centeringitontheboard’sactivearea,takingintoaccounttheprojector’sangleofprojection.

2 Ifpossible,lineuptheholesonthebottomoftheDualBoard’sframewiththebracketsonthelowercrossbaroftheframeanduseaPhillipsscrewdrivertoscrewthesheetmetalscrewsintothepre-drilledholesintheboard’sframe.

Hang the DualBoard on the Mounted Frame

1 Attachtheuniversalmounttothetopoftheprojector,adjustingthearmsasnecessarytofit.

Universal Mount

Universal Mount in place on top of the projector

Hang Projector Holder from Projector Gimbal Mount on Projector Arm Extension

Prepare the Projector to Hang from the Projector Arm

2 Haveonepersonstepontheframehandletolowertheframe,whiletheotherpersonhangstheprojectorontheprojectorgimbalmountattheendoftheprojectorextensionarm.Or,useastepladdertohangtheprojectorontheprojectorgimbalmount.

3 Connectthecablestotheprojector.

4 Releasetheframehandle,allowingtheDualBoardandprojectorarmtoraiseuptotheirnormalposition.

5 Turntheprojectoronandadjusttheprojectorangles.Whentheprojectorandtheprojectorextensionarmareproperlypositioned,addtheside

screwstotheprojectorgimbalmounttolockitintoplaceandtightenallotherscrewstoholdtheprojectorandprojectorextensionarminplace.


Weak Wall Mount Instructions


1 Whiletwopeopleholdtheframeinplace,athirdpersonshouldattachtheframetotheanchoredstandusingthehardwareprovided.

Mount the Assembled AdjustIt II Frame on the Weak Wall Stand


2 Ifpossible,lineuptheholesonthebottomoftheDualBoard’sframewiththebracketsonthelowercrossbaroftheframeanduseaPhillipsscrewdrivertoscrewthesheetmetalscrewsintothepre-drilledholesintheboard’sframe.

Hang the Interwrite DualBoard on the Mounted Frame

Attach Weak Wall Stand to the Wall and Floor

2 PositiontheWeakWallStandagainstthewallandmarkwhereitwillbeattachedtothewallandtothefloor.

3 Usetheappropriatehardwaretoanchorthestandtothewallandtothefloor.

1 Usingtheprovidedscrewsandwashers,attachtheL-bracketstotheWeakWallStand:twotoeachsideofthestandandonetoeachfoot.Usetheprovidedallenwrenchtotightenthescrews.

Attach L-Brackets to Side of Weak Wall Stand

Attach L-Bracket to Weak Wall Stand Foot

L-Brackets

Weak Wall Stand

The Weak Wall Stand provides additional support for the AdjustIt II frame assembly with the at-tached Interwrite DualBoard and super short-throw projector when it has been determined by professionals that the wall is not strong enough to support the weight of the AdjustIt II System and the force exerted by moving the board up and down. The hardware to attach the Weak Wall Stand to the wall and to the floor is not provided and should be determined by those who know the requirements of the installation.

5

Weak Wall Mount Instructions



Universal Mount










Assemble the Mobile Stand

Mobile Stand Mount Instructions

1 Withonepersonholdingeachsideoftheassembledframe,lineuptheholesintheplatesontheframewiththoseintheMobileStanduprights.AthirdpersoncanusetheprovidedscrewsandwasherstoattachtheassembledframetotheMobileStand.Usetheprovidedallenwrenchtotightenthescrews.

Attach the Assembled Frame to the Mobile Stand

1 Usingthelarge,whiteknobs,attachthestabilizerstotheI-frame.

ThestabilizerspivotupanddownwhenthefrontknobsareloosenedsotheMobileStandcanbetilted,ifneces-sary,whenmoving.TightenbothsetsofknobsandsetthecasterbrakeswhentheMobileStandisstationery.White Knobs

Stabilizer

Caster Brake

2 AttachtheuprightframetotheassembledI-frameusingtheprovidedscrewsandwashers.Usetheprovidedallenwrenchtotightenthescrews.

When you move the Mobile Stand, unscrew the white knob holding the projector arm in place and swing the projector arm to the side. You can also loosen the for-ward knobs on the Mobile Stand Stabilizers and swing them up, so the Mobile Stand can be tilted, if neces-sary, to clear a doorway.


36-01546/37-01337-01RevB

Mobile Stand Mount Instructions


2 LineuptheholesonthebottomoftheDualBoard’sframewiththebracketsonthelowercrossbaroftheframeanduseaPhillipsscrewdrivertoscrewthesheetmetalscrewsintothepre-drilledholesintheboard’sframe.

Hang the Interwrite DualBoard on the Frame on the Mobile Stand


Universal Mount









www.einstruction.com/support

Copyright©2009eInstructionInterwriteisaregisteredtrademarkandWorkspaceisatrademarkofeInstructionCorp.

Allotherproductsandcompanynamesarethetrademarksorregisteredtrademarksoftheirrespectiveowners.Theinformationcontainedinthisdocumentissubjecttochangewithoutnotice.eInstructionassumesnoresponsibilityfortechnical,oreditorialerrors,oromissionsthatmayappearinthisdocument,orfortheuseofthismaterial.NordoeseInstructionmakeanycommitmenttoupdatetheinformationcontainedinthisdocument.Thisdocumentcontainsproprietaryinformationwhichisprotectedbycopyright.Allrightsreserved.Nopartofthisdocumentcanbephotocopiedorreproducedinanyformwithouttheprior,writtenconsentofeInstruction.

Corporate Headquarters308NCarrollBlvdDenton,Texas76201Tel: 888.707.6819Fax: 940.565.0959

Western Office14400N87thSt.,Ste.250Scottsdale,Arizona85260Tel: 480.948.6540Support: 480.443.2214Fax: 480.948.5508

European HeadquarterseInstructionEMEA CentreEducationEMEA26/36rueAlfredNobel93600AulnaySousBoisFranceTel: +331.58.31.10.60Support: +331.58.31.10.65Fax: +331.58.31.10.69