AccuPyc Bibliography of Peer-Reviewed Papers
2013
TITLE AUTHORS & PUBLICATION CITATION
A methodological approach for determining
the effect of moisture content on the
compaction properties of powders: Granular
hydroxyapatite
Wade, J.B. / Martin, G.P. / Long, D.F., Powder
Technology, 246, p.511-519, Sep 2013
..was determined using helium pycnometry (Helium AccuPyc 1330, Micromeritics,
Norcross, Georgia, USA). The instrument was...a nitrogen adsorption method
(TriStar 3000, Micromeritics, Norcross, Georgia, USA). Samples were outgassed...
A methodological approach for determining
the effect of moisture content on the
compaction properties of powders: Granular
hydroxyapatite
Wade, J.B. / Martin, G.P. / Long, D.F., Powder
Technology, 246, p.511-519, Sep 2013
..using helium pycnometry (Helium AccuPyc 1330, Micromeritics, Norcross, Georgia,
USA). The instrument was...measured using a nitrogen adsorption method (TriStar
3000, Micromeritics, Norcross, Georgia, USA). Samples were outgassed...
A simple route for organic covalent grafting
onto zirconium carbide particles
Lucas, Romain / Pizon, David / Laborde, Etienne /
Trolliard, Gilles / Foucaud, Sylvie / Maître,
Alexandre, Applied Surface Science, In Press,
Corrected Proof,Oct 2013
..carbide powder, laser granulometry analyses were performed (AccuPyc II 1340,
Micrometrics France S.A. Verneuil Halatte...measured thanks to the gas adsorption
method (ASAP 2010, Micromeritics France S.A., Verneuil Halatte, France). Samples
(450...
Adsorbent density impact on gas storage
capacities
Kunowsky, Mirko / Suárez-García, Fabián /
Linares-Solano, Ángel, Microporous and
Mesoporous Materials, 173, p.47-52, Jun 2013
..was evaluated, taking into account a reference measurement without sample.
True densities were measured in a Micromeritics Accupyc 1330 pycnometer. Before
every measurement the samples were degassed at 393 K into vacuum for at least 4
h, and...
Adsorption kinetics of herbicide paraquat in
aqueous solution onto a low-cost adsorbent,
swine-manure-derived biochar
WT Tsai, HR Chen - International Journal of
Environmental Science and … - Springer
... of total pore volume and true density. g Measured by the helium-displacement
method using an AccuPyc 1340 pycnometer (Micromeritics Co., USA ... purity of
minimum 87.0 %) were immediately made with a 1.0 cm light path quartz cell in a
spectrophotometer (Hitachi U-2900) at λ
An experimental and numerical study of
packing, compression, and caking behaviour
of detergent powders
Thakur, Subhash C. / Ahmadian, Hossein / Sun,
Jin / Ooi, Jin Y., Particuology, In Press, Corrected
Proof,Sep 2013
..and mercury porosimetry. A gas pycnometer, Accupyc II 1340 (Micromeritics,
USA), was used to measure skeletal density...conducted using mercury porosimetry
(AutoPore IV, Micromeritics, USA). The instrument provides a wide range...
An experimental and numerical study of
packing, compression, and caking behaviour
of detergent powders
Thakur, Subhash C. / Ahmadian, Hossein / Sun,
Jin / Ooi, Jin Y., Particuology, In Press, Corrected
Proof,Sep 2013
..porosimetry. A gas pycnometer, Accupyc II 1340 (Micromeritics, USA), was used to
measure skeletal density...samples was conducted using mercury porosimetry
(AutoPore IV, Micromeritics, USA). The instrument provides a wide range...
Anacardium occidentale L. leaves extraction
via SFE: Global yields, extraction kinetics,
mathematical modeling and economic
evaluation
Leitão, N.C.M.C.S. / Prado, G.H.C. / Veggi, P.C. /
Meireles, M.A.A. / Pereira, C.G., The Journal of
Supercritical Fluids, 78, p.114-123, Jun 2013
..32 (4.1%), and 48 (27%). The real density of the particles was measured using
helium picnometry (Micromeritics, AccuPyc II 1340, Norcross, USA) by Analytical
Facilities of the Institute of Chemistry (IQ/Unicamp). The apparent...
Anisotropy of green stoneware evaluated by
ultrasound measurements in combination
with texture analyses
Romagnoli, Marcello / Lassinantti Gualtieri,
Magdalena / Gualtieri, Alessandro F. / Šliteris,
Reimondas / Kažys, Rymantas / Tari, Giuliano,
Journal of the European Ceramic Society, 33 (13-
14), p.2785-2792, Nov 2013
..density ( ρ t ) of the dried starting powder was determined using a gas
displacement pycnometer instrument (AccuPyc 1330, Micromeritics Inc., USA).
Total porosity ( TP ) was calculated according to 23 : (1) T P = 1 − ρ ρ t × 100
Porosimetry...
TITLE AUTHORS & PUBLICATION CITATION
Anisotropy of green stoneware evaluated by
ultrasound measurements in combination
with texture analyses
Romagnoli, Marcello / Lassinantti Gualtieri,
Magdalena / Gualtieri, Alessandro F. / Šliteris,
Reimondas / Kažys, Rymantas / Tari, Giuliano,
Journal of the European Ceramic Society, 33 (13-
14), p.2785-2792, Nov 2013
..a gas displacement pycnometer instrument (AccuPyc 1330, Micromeritics Inc.,
USA). Total porosity ( TP ) was calculated according...ρ ρ t × 100 Porosimetry data
were collected using an Autopore IV 9500 scanning mercury porosimeter. The
contact angle...
Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3− δ (BSCF)
feedstock development and optimization for
thermoplastic forming of thin planar and
tubular oxygen separation membranes
Salehi, Mehdi / Pfaff, Ewald M. / Junior, Roberto
Morkis / Bergmann, Carlos P. / Diethelm, Stefan /
Neururer, Christoph / Graule, Thomas / (...) / Jörg
Clemens, Frank, Journal of Membrane Science,
443, p.237-245, Sep 2013
..the powders were measured by He-pycnometer (Micromeritics, AccuPyc 1330,
USA). 2.2 Feedstock preparation...of the same feedstock using He-pycnometer
(Micromeritics, AccuPyc 1330, USA). The rheology of the feedstocks...
Behaviour of a bauxite waste material as
oxygen carrier in a 500 W th CLC unit with
coal
Mendiara, T. / de Diego, L.F. / García-Labiano, F. /
Gayán, P. / Abad, A. / Adánez, J., International
Journal of Greenhouse Gas Control, 17, p.170-
182, Sep 2013
..measured by Hg intrusion in a Quantachrome PoreMaster 33. The skeletal density
of the particles was measured with a Micromeritics AccuPyc II 1340 helium
picnometer. Brunauer–Emmett–Teller (BET) surface area value was measured and a
low value...
Bimodal distribution of filler on viscosity and
thermal expansion of glass composites
Samal, Sneha / Cho, Sunghwan / Kim, Hyungsun,
Ceramics International, 39 (2), p.1659-1666, Mar
2013
..microscope (SEM; Hitachi S-4300). The densities of the green composites were
calculated by using a pycnometer (Micromeritics, Accupyc II 1340). The
crystallization phases of the green and fired composites were analyzed using XRD
techniques...
Bone marrow absorption and retention
properties of engineered scaffolds with
micro-channels and nano-pores for tissue
engineering: A proof of concept
Oh, Daniel S. / Hyuk Kim, Yoon / Ganbat, Danaa /
Han, Myung-Ho / Lim, Phillip / Back, Jung-Ho /
Lee, Francis Y. / Tawfeek, Hesham, Ceramics
International, 39 (7), p.8401-8410, Sep 2013
..micro-CT (SkyScan 1172), mechanical testing (5848 Instron MicroTester), and
helium pycnometry (porosity: AccuPyc II 1340 micromeritics). We had three scaffold
groups based on their average macro-pore sizes (450 um, 320 um, and 200 um...
Boron nitride nanotubes reinforced
aluminum composites prepared by spark
plasma sintering: Microstructure, mechanical
properties and deformation behavior
Lahiri, Debrupa / Hadjikhani, Ali / Zhang, Cheng /
Xing, Tan / Li, Lu Hua / Chen, Ying / Agarwal,
Arvind, Materials Science and Engineering: A,
574, p.149-156, Jul 2013
..reactivity of Al with BNNT. The density of the sintered pellets was measured using
helium gas pycnometry (Accupyc 1340, Micromeretics Instrument Corporation,
Norcross, GA, USA) and expressed in terms of relative density, while calculating the
true density...
Bubbling fluidization of biomass and sand
binary mixtures: Minimum fluidization
velocity and particle segregation
Oliveira, T.J.P. / Cardoso, C.R. / Ataíde, C.H.,
Chemical Engineering and Processing: Process
Intensification, 72, p.113-121, Oct 2013
..true density [14] . Therefore, the materials were oven-dried at 105 °C for 24 h
before the analyses. A Micromeritics AccuPyc 1331 gas pycnometer with a
measuring sensitivity of 10 −4 g/cm 3 was used to infer the true density of the...
Bulk, surface properties and water uptake
mechanisms of salt/acid amorphous
composite systems
Bianco, Stefano / Tewes, Frederic / Tajber, Lidia /
Caron, Vincent / Corrigan, Owen I. / Healy, Anne
Marie, International Journal of Pharmaceutics,
456 (1), p.143-152, Nov 2013
..Jaoczuk, 2010 ). 2.9 Density measurements The density of spray dried ST and STNa
was measured by an Accupyc 1330 Pycnometer (Micromeritics ® ) using helium
(99.995% purity) to determine the volume of the sample. Samples were dried prior...
Carbon meringues derived from flavonoid
tannins Szczurek, A. / Fierro, V. / Pizzi, A. / Stauber, M. /
Celzard, A., Carbon, 65, p.214-227, Dec 2013
..pycnometry using an Accupyc II 1340 (Micromeritics) automatic apparatus. For
that purpose...at −196 °C using an ASAP 2020 (Micromeritics) automatic apparatus.
All the samples...determined by mercury intrusion, using an AutoPore IV 9500
(Micrometrics) porosimeter...
TITLE AUTHORS & PUBLICATION CITATION
Carbon meringues derived from flavonoid
tannins Szczurek, A. / Fierro, V. / Pizzi, A. / Stauber, M. /
Celzard, A., Carbon, 65, p.214-227, Dec 2013
..was estimated by helium pycnometry using an Accupyc II 1340 (Micromeritics)
automatic apparatus. For that purpose, all samples...adsorption at −196 °C using an
ASAP 2020 (Micromeritics) automatic apparatus. All the samples were...
Carbonate-containing apatite (CAP) synthesis
under moderate conditions starting from
calcium carbonate and orthophosphoric acid
Pham Minh, Doan / Tran, Ngoc Dung / Nzihou,
Ange / Sharrock, Patrick, Materials Science and
Engineering: C, 33 (5), p.2971-2980, Jul 2013
..P°) of 0.03 to 0.99. True density of the solid powders was measured by helium
pycnometry using an Accupyc 1330 (Micromeritics). Scanning electron microscopy
(SEM) was measured on a Philips XL30 ESEM apparatus (FEI Company). Particle...
Carbonisation of resorcinol–formaldehyde
organic xerogels: Effect of temperature,
particle size and heating rate on the porosity
of carbon xerogels
Moreno, A.H. / Arenillas, A. / Calvo, E.G. /
Bermúdez, J.M. / Menéndez, J.A., Journal of
Analytical and Applied Pyrolysis, 100, p.111-116,
Mar 2013
..The adsorption analysis was carried out with a Micromeritics Tristar 3020, for the
study of microporosity and...densities of the RF carbon xerogels were measured in a
Micromeritics AccuPyc 1340 Pycnometer. Before measuring the helium density...
Ceramic/metal nanocomposites by
lyophilization: Spark plasma sintering and
hardness
Gutierrez-Gonzalez, C.F. / Agouram, S. /
Torrecillas, R. / Moya, J.S. / Lopez-Esteban, S.,
Ceramics International, In Press, Corrected
Proof,Sep 2013
..characterize the powders obtained. The density of the powders was determined by
using a Helium Pycnometer ( AccuPyc 1330 , Micromeritics France S.A. ). X-ray
diffraction analysis of the powders at different stages of the different processing...
Characterising highly active nuclear waste
simulants
Paul, Neepa / Biggs, Simon / Edmondson,
Michael / Hunter, Timothy N. / Hammond,
Robert B., Chemical Engineering Research and
Design, 91 (4), p.742-751, Apr 2013
..modification. 2.2 Particle characterisation Particle density was measured using the
Micrometrics AccuPyc 1330 helium pycnometer (Micromeritics Instrument
Corporation, US). The input weight of the solids were measured, the density is
determined...
Characterization and performance
assessment of solid dispersions prepared by
hot melt extrusion and spray drying process
Agrawal, Anjali M. / Dudhedia, Mayur S. / Patel,
Ashwinkumar D. / Raikes, Michelle S.,
International Journal of Pharmaceutics, 457 (1),
p.71-81, Nov 2013
..5.12 True density of dispersions The true density of milled solid dispersions
powder was determined using Micromeritics AccuPyc 1330 Gas pycnometer S/N-
4011 (Norcross, GA). Calibration was performed prior to each run. Sample was...
Characterization of a gluten reference
material: Wheat-contaminated oats
Alvarez, Pedro A. / Mongeon, Vanessa J. / Boye,
Joyce I., Journal of Cereal Science, 57 (3), p.418-
423, May 2013
..cases (data not shown). Bulk density was determined via an AccuPyc II 1340 gas
pycnometer using helium at 23 °C, 100 cm 3 sample chamber, and
∼
30 g sample
size (Micromeritics Instruments Corp., Norcross, GA). Moisture of flours was...
Characterization of carbon/carbon
composites prepared by different processing
routes including liquid pitch densification
process
Dekeyrel, Alixe / Dourges, Marie-Anne /
Weisbecker, Patrick / Pailler, René / Allemand,
Alexandre / Ténèze, Nicolas / Epherre, Jean-
François, Composites Part A: Applied Science and
Manufacturing, 49, p.81-88, Jun 2013
..determined by helium pycnometry using an AccuPyc 1340 pycnometer
manufactured by Micromeritics. Apparent densities were obtained
from...characterized by mercury intrusion porosimetry (Micromeritics Autopore IV)
for pre-densified preforms...
TITLE AUTHORS & PUBLICATION CITATION
Characterization of carbon/carbon
composites prepared by different processing
routes including liquid pitch densification
process
Dekeyrel, Alixe / Dourges, Marie-Anne /
Weisbecker, Patrick / Pailler, René / Allemand,
Alexandre / Ténèze, Nicolas / Epherre, Jean-
François, Composites Part A: Applied Science and
Manufacturing, 49, p.81-88, Jun 2013
..using an AccuPyc 1340 pycnometer manufactured by Micromeritics. Apparent
densities were obtained from weight...characterized by mercury intrusion
porosimetry (Micromeritics Autopore IV) for pre-densified preforms.
Microstructures...
Characterization of dynamics in complex
lyophilized formulations: II. Analysis of
density variations in terms of glass dynamics
and comparisons with global mobility, fast
dynamics, and Positron Annihilation Lifetime
Spectroscopy (PALS)
Chieng, Norman / Cicerone, Marcus T. / Zhong,
Qin / Liu, Ming / Pikal, Michael J., European
Journal of Pharmaceutics and Biopharmaceutics,
85 (2), p.197-206, Oct 2013
..2.1 Density The densities of the freeze-dried samples were obtained using a helium
pycnometer (AccuPyc 1330 Gas Pycnometer, Micromeritics Instruments
Corporation, Norcross, USA), which was described previously [19] . In order to
prevent...
Characterization of laminar extrudates
manufactured at room temperature in the
absence of solvents for the delivery of drugs
Oliveira, G. / Wahl, M.A. / Pinto, J.F.,
International Journal of Pharmaceutics, 454 (1),
p.90-98, Sep 2013
..extrudates (at 0, 1, 2, 3, 7, 10 and 20 days after production) were determined in a
helium pycnometer (AccuPyc 1330, Micromeritics, USA) at room temperature (23
°C) ( n = 3). The expected densities of the extrudates were calculated...
Characterization of polyurethane networks
structure and properties based on rapeseed
oil derived polyol
Fridrihsone, Anda / Stirna, Uldis / Lazdiņa, Brigita
/ Misāne, Marija / Vilsone, Dzintra, European
Polymer Journal, 49 (6), p.1204-1214, Jun 2013
..min −1 . The density of PU films was determined by using gas picnometry. The gas
pycnometer Micromeritics AccuPyc II 1340 from Micromeritics was used. 2.6
Calculations of structure parameters Functionality is the second most important...
Characterization of the porosity in TRISO
coated fuel particles and its effect on the
relative thermal diffusivity
Bari, Klaudio / Osarinmwian, Charles / López-
Honorato, Eddie / Abram, Timothy J., Nuclear
Engineering and Design, 265, p.668-674, Dec
2013
..linear diffusion 4-noded DC3D4 element was employed as a mesh element type in
Abaqus. Helium gas pycnometry (Micromeritics, AccuPyc II 1340) was used to
measure the absolute density of the TRISO particles and the total pore volume of
the OPyC...
Chitosan macroporous foams obtained in
highly concentrated emulsions as templates
Miras, Jonathan / Vílchez, Susana / Solans,
Conxita / Esquena, Jordi, Journal of Colloid and
Interface Science, 410, p.33-42, Nov 2013
..kV. 2.6.2 Helium pycnometry Matrix or skeletal density of macroporous foams was
determined using a Helium Micromeritics AccuPyc 1330 pycnometer. The average
density was calculated by means of the measurement of four replicas. The total...
Chromatographic separation of wood model
constituents - Mathematical modeling and
parameter estimation
Westerberg, Niklas / Rasmuson, Anders,
Chemical Engineering Research and Design, In
Press, Accepted Manuscript,Oct 2013
..volume calculated from these experiments. In addition to these experiments the
solid density was measured using a Micromeritics Accupyc 1330 pycnometer. From
the solid density the total porosity of the column could be derived if the mass of
the...
CiteEnergetic salts based on 1-methoxy-5-
nitroiminotetrazoleYH Joo, JH Chung, SG Cho, EM Goh - New Journal
of Chemistry, 2013 - pubs.rsc.org
... Densities of the 1-methoxy-5-nitroiminotetrazole salts were determined at 25 °C
by employing a Micromeritics AccuPyc 1340 gas pycnometer. ... Raman (532 nm, 50
mW) ν/cm −1 3319, 3248, 3017, 2950, 1509, 1309, 1292, 1092, 1025, 967.
Comparative study of the nano-composite
electrolytes based on samaria-doped ceria
for low temperature solid oxide fuel cells (LT-
SOFCs)
Khan, M. Ajmal / Raza, Rizwan / Lima, Raquel. B.
/ Chaudhry, M. Asharf / Ahmed, E. / Abbas,
Ghazanfar, International Journal of Hydrogen
Energy, In Press, Corrected Proof,Jun 2013
..respectively. The prepared electrolytes materials are 90% dense which was
measured with He-pycnometry (AccuPyc 1340 Micromeritics, USA). The TGA curves
of the SDC: M 2 CO 3 (M = Na, Li, K) nanocomposite electrolytes are presented...
TITLE AUTHORS & PUBLICATION CITATION
Comparison of a xenogeneic and an
alloplastic material used in dental implants in
terms of physico-chemical characteristics and
in vivo inflammatory response
Figueiredo, Andreia / Coimbra, Patrícia / Cabrita,
António / Guerra, Fernando / Figueiredo,
Margarida, Materials Science and Engineering: C,
33 (6), p.3506-3513, Aug 2013
..mercury intrusion porosimetry (Poresizer 9320, Micromeritics Instrument Corp.,
Norcross...pycnometry (Accupyc 1330, Micromeritics Instrument Corp.),
using...adsorption technique (ASAP 2000, Micromeritics Instrument...
Comparison of a xenogeneic and an
alloplastic material used in dental implants in
terms of physico-chemical characteristics and
in vivo inflammatory response
Figueiredo, Andreia / Coimbra, Patrícia / Cabrita,
António / Guerra, Fernando / Figueiredo,
Margarida, Materials Science and Engineering: C,
33 (6), p.3506-3513, Aug 2013
..porosimetry (Poresizer 9320, Micromeritics Instrument Corp...determined by gas
pycnometry (Accupyc 1330, Micromeritics Instrument Corp.), using...adsorption
technique (ASAP 2000, Micromeritics Instrument Corp.) using...
Compressibility and dissolution
characteristics of mixed fruit tablets made
from guava and pitaya fruit powders
Zea, Lai Pei / Yusof, Yus Aniza / Aziz, Mohammad
Gulzarul / Ling, Chin Nyuk / Amin, Nor Amaiza
Mohd, Powder Technology, 247, p.112-119, Oct
2013
..Carr index [12] . The Hausner ratio and Carr index were used to calculate
flowability. A gas pycnometer (AccuPyc II 1340, Micromeritics, Norcross, USA) was
used to determine the absolute density. The particle size of the guava and the
pitaya...
Compression Prediction Accuracy From Small
Scale Compaction Studies To Production
Presses
Pitt, Kendal G. / Hill, Rachael J. Webbera / Kirsty
A. / Dey, Dipankar / J.Gamlen, Michael, Powder
Technology, In Press, Accepted Manuscript,Oct
2013
..3 Density measurements The true density of the compression blends was
measured using helium pycnometry (Accupyc 1330, Micromeritics Instrument
Corporation, U.S.A.). 3 Results and Discussion 3.1 Direct compression formulation
The...
Concentration and particle size distribution
of particulate matter inside tunnel-ventilated
high-rise layer operation houses
Wang-Li, Lingjuan / Cao, Zihan / Li, Qianfeng /
Liu, Zifei / Beasley, David B., Atmospheric
Environment, 66, p.8-16, Feb 2013
..using Eq. (5) with an assumption of the particle shape factor in 1 and with a
particle density of 1.48 g/cm 3 measured by an AccuPyc 1330 Pycnometer. b
Average of three replicates from TSP samples taken by three co-located TSP
samplers. c Average of two replicates...
Consolidation trend design based on Young's
modulus of clarithromycin single crystals
Jankovid, B. / Škarabot, M. / Lavrič, Z. / Ilid, I. /
Muševič, I. / Srčič, S. / Planinšek, O., International
Journal of Pharmaceutics, 454 (1), p.324-332, Sep
2013
..In addition, the true density of powdered Clar forms was measured in triplicate
with a helium pycnometer (AccuPyc 1330, Micromeritics, Norcross, GA, USA).
Compressibility was evaluated using “in-die” Heckel analysis ( Heckel, 1961...
Control of three-dimensional substrate
stiffness to manipulate mesenchymal stem
cell fate toward neuronal or glial lineages
Her, Goh Jih / Wu, Hsi-Chin / Chen, Ming-Hong /
Chen, Ming-Yi / Chang, Shun-Chih / Wang, Tzu-
Wei, Acta Biomaterialia, 9 (2), p.5170-5180, Feb
2013
..replicates. For porosity analysis, three replicates from each group of scaffolds were
measured by using AccuPyc 1330 Pycnometer (Micromeritics, USA). The porosity of
scaffolds was calculated with the following equation: (1) Porosity of scaffolds...
Controlling electron injection and electron
transport of dye-sensitized solar cells aided
by incorporating CNTs into a Cr-doped TiO 2
photoanode
Massihi, N. / Mohammadi, M.R. / Bakhshayesh,
A.M. / Abdi-Jalebi, M., Electrochimica Acta, 111,
p.921-929, Nov 2013
..vis) spectroscopy using a 6705 JENWAY spectrometer. The density of the TiO 2
nanostructures was measured by a Micromeritics AccuPyc 1330 pycnometer
analyzer. Photovoltaic measurements were carried out using a solar simulator under
standard test...
Correlation between processing conditions,
microstructure and charge transport in half-
Heusler alloys
Makongo, Julien P.A. / Zhou, Xiaoyuan / Misra,
Dinesh K. / Uher, Ctirad / Poudeu, Pierre F.P.,
Journal of Solid State Chemistry, 201, p.280-287,
May 2013
..13] . Densities of loose powders and pressed pellets were respectively obtained by
He gas pycnometry using a Micromeritics Accupyc II 1340 and by geometrical
measurements using a digital micrometer. The relative packing densities for all
pellets...
TITLE AUTHORS & PUBLICATION CITATION
Correlation of microstructure and thermal
conductivity in nanoporous solids: The case
of polyurea aerogels synthesized from an
aliphatic tri-isocyanate and water
Weigold, Lena / Mohite, Dhairyashil P. / Mahadik-
Khanolkar, Shruti / Leventis, Nicholas /
Reichenauer, Gudrun, Journal of Non-Crystalline
Solids, 368, p.105-111, May 2013
..the skeletal density ( ρ solid ), via Eq. (1) . Skeletal density was obtained by helium
pycnometry using a Micromeritics AccuPyc II 1340 instrument. Before analysis,
samples were degassed for 48 h at 80 °C and then stored under vacuum in...
Coupled concentration-dependent
diffusivities of ethanol/water mixtures
through a polymeric membrane: Effect on
pervaporative flux and diffusivity profiles
Yang, Tzu-Huai / Lue, Shingjiang Jessie, Journal of
Membrane Science, 443, p.1-9, Sep 2013
..200±15 μm with a membrane density of 1.090±0.051 g/cm 3 measured using the
pycnometer (model Accupyc II 1340, Micromeritics Inc. Co., Norcross, Georgia,
USA). The characterization of the PDMS membrane has been shown in previous...
Decontamination of metals and polycyclic
aromatic hydrocarbons from slag-polluted soilS Bisone, G Mercier, JF Blais - Environmental
Technology, 2013 - Taylor & Francis
... Elmer, model Clarus 500, with column type Rxi®-17, 30 mx 0.25 mm x 0.25 µm).
10 The soil density was measured by a Micromeritics AccuPyc 1330 Pycnometer
using dry soil 11 samples of approximately 20–25 g. 12 Techno-economic evaluation
13
Deep subsoiling of a subsurface-compacted
typical hapludult under citrus orchardJC Medeiros, GC Figueiredo, ÁL Mafra… - Revista
Brasileira de …, 2013 - SciELO Brasil
... E-mail: [email protected] III Professor, Santa Catarina State University.
Av. Luiz de Camões, 2900. CEP 88520-000 Lages (SC), Brazil. ... The particle density
was evaluated using a helium pycnometer (ACCUPYC 130, Micromeritics Instrument
Corporation TM , USA).
Deformation properties of pharmaceutical
excipients determined using an in-die and
out-die method
Ilid, Ilija / Govedarica, Biljana / Šibanc, Rok / Dreu,
Rok / Srčič, Stane, International Journal of
Pharmaceutics, 446 (1-2), p.6-15, Mar 2013
..Greifensee, Switzerland). True density of tableting mixtures was determined with a
helium pycnometer (AccuPyc 1330, Micromeritics, Norcross, GA, USA).
Compressibility was determined using both in-die and out-die Heckel and Walker...
Degradation of p -nitrophenol and bacteria with TiO 2 xerogels
sensitized in situ with tetra( 4 -carboxyphenyl)porphyrins
Tasseroul, Ludivine / Lambert, Stéphanie D. /
Eskenazi, David / Amoura, Makhlouf / Páez,
Carlos A. / Hiligsmann, Serge / Thonart, Philippe /
Heinrichs, Benoît, Journal of Photochemistry and
Photobiology A: Chemistry, 272, p.90-99, Nov
2013
..in KBr (0.6 wt.% for all samples). Apparent densities, ρ app , were measured by
helium pycnometry on a Micromeritics AccuPyc 1330 device. The pore texture of
the xerogels was examined by nitrogen adsorption–desorption measurements...
Design of ceramic paste formulations for co-
extrusion
Powell, Jonathan / Assabumrungrat, Suttichai /
Blackburn, Stuart, Powder Technology, 245, p.21-
27, Sep 2013
..binder made according to the formulation given in Table 1 was measured using a
constant volume pycnometer (Accupyc 1330, Micromeritics, UK) and was found to
be 1835 kg.m − 3 . This indicates that the constituents, PVB, DBP and stearic...
Determination of texture and transport
characteristics of electrospun nanofibrous
mats
Soukup, K. / Hejtmánek, V. / Petráš, D. / Šolcová,
O., Colloids and Surfaces A: Physicochemical and
Engineering Aspects, 437, p.133-140, Nov 2013
..the ASAP2020M instrument (Micromeritics, USA) by two
independent...AUTOPORE III instrument (Micromeritics, USA) were used for
determination...He was determined on the AccuPyc 1920 instrument
(Micromeritics, USA) and porosity ɛ...
Determination of texture and transport
characteristics of electrospun nanofibrous
mats
Soukup, K. / Hejtmánek, V. / Petráš, D. / Šolcová,
O., Colloids and Surfaces A: Physicochemical and
Engineering Aspects, 437, p.133-140, Nov 2013
..the ASAP2020M instrument (Micromeritics, USA) by two
independent...porosimetry performed on AUTOPORE III instrument (Micromeritics,
USA) were used for determination...AccuPyc 1920 instrument (Micromeritics, USA)
and porosity ɛ...
TITLE AUTHORS & PUBLICATION CITATION
Determination of the reaction rate
coefficient of sulphide mine tailings
deposited under water
Awoh, Akué Sylvette / Mbonimpa, Mamert /
Bussière, Bruno, Journal of Environmental
Management, 128, p.1023-1032, Oct 2013
..distribution measurements are given by Merkus (2009) . The relative density of
tailings was determined using a Micromeritics Accupyc 1330 helium pycnometer
(the accuracy is to within 0.03% of reading plus 0.03% of nominal full-scale sample...
Economical production of PVDF-g-POEM for
use as a blend in preparation of PVDF based
hydrophilic hollow fibre membranes
Moghareh Abed, M.R. / Kumbharkar, S.C. /
Groth, A.M. / Li, K., Separation and Purification
Technology, 106, p.47-55, Mar 2013
..in DMSO-d 6 . The density of the PVDF powder and the synthesised copolymer was
measured using a pycnometer (Micromeritics Accupyc 1330, Bedfordshire, UK). The
molecular weights of the synthesised copolymer and pure PVDF were determined...
Effect of flaxseed processing on engineering
properties and fatty acids profiles of pasta
Villeneuve, Sébastien / Des Marchais, Louis-
Philippe / Gauvreau, Vanessa / Mercier, Samuel /
Do, Chi Bao / Arcand, Yves, Food and Bioproducts
Processing, 91 (3), p.183-191, Jul 2013
..cups for bulk density measurement. True density was determined in triplicate with
a Helium Gas Pycnometer (AccuPyc II 1340, Micromeritics, Norcross, GA, USA). The
1000-grain weight was determined in triplicate according to method ASBC Barley-
2D...
Effect of operational parameters and stress
energies on the particle size distribution of
TiO 2 pigment in stirred media milling
Ohenoja, Katja / Illikainen, Mirja / Niinimäki,
Jouko, Powder Technology, 234, p.91-96, Jan
2013
..The filling ratio of the grinding media was kept constant at 70 vol.%. 2.3 Analysis A
gas pycnometer (Micromeritics AccuPyc II 1340) was used to measure the densities
of the grinding beads, and a Beckman Coulter LS 13 320 particle size...
Effect of petroleum (pet) coke addition on
the density and thermal conductivity of
cement pastes and mortars
Olmeda, J. / Sánchez de Rojas, M.I. / Frías, M. /
Donatello, S. / Cheeseman, C.R., Fuel, 107, p.138-
146, May 2013
..Pet coke has a density of approximately 1350 kg/m 3 when measured at 26 ± 2 °C
by He picnometry (model Micromeritics Accupyc 1330) and this is much lower than
that of the hydrated cement paste matrix (1900 kg/m 3 ). At 30% addition...
Effect of polymers for aerolization properties
of mannitol-based microcomposites
containing meloxicam
Pomázi, Anita / Buttini, Francesca / Ambrus, Rita
/ Colombo, Paolo / Szabó-Révész, Piroska,
European Polymer Journal, 49 (9), p.2518-2527,
Sep 2013
..parameters: 300RF lens; small volume dispersion unit (1000 rpm); true density of
MX = 1.565 g cm −3 (AccuPyc 1330, Micromeritics, Norcross, USA); 1.596 was taken
as the refractive index for dispersed particles and 1.330 for the dispersion...
Effect of silica nanoparticles on the bulk flow
properties of fine cohesive powders Kojima, Takehiro / Elliott, James A., Chemical
Engineering Science, 101, p.315-328, Sep 2013
..84 µm and σ g =1.31. The particle density of the PS-DVB microspheres measured
by a gas pycnometer (Accupyc 1330, Micromeritics, USA) was 1070 kg m −3 . The
size distribution of PS-DVB microspheres is very similar to those of the...
Effect of temperature on thermochemical
property and true density of torrefied coffee
residue
Tsai, Wen-Tien / Liu, Sii-Chew, Journal of
Analytical and Applied Pyrolysis, 102, p.47-52, Jul
2013
..very small molecule size (about 0.2 nm). A helium displacement method with a
pycnometer (Micromeritics Co., U.S.A.; Model No.: AccuPyc 1340) was used to
measure the true density of the torrefied sample in this work. Although the...
Effect of the addition of waste sawdust on
thermoplastic properties of a coal Montiano, M.G. / Barriocanal, C. / Alvarez, R.,
Fuel, 106, p.537-543, Apr 2013
..was measured by means of helium pycnometry in a Micromeritics Accupyc 1330
Pycnometer. Their apparent density ( ρ Hg ) was determined with mercury at 0.1
MPa in a Micromeritics autopore IV 9500 mercury porosimeter. From the...
Effect of the addition of waste sawdust on
thermoplastic properties of a coal Montiano, M.G. / Barriocanal, C. / Alvarez, R.,
Fuel, 106, p.537-543, Apr 2013
..was measured by means of helium pycnometry in a Micromeritics Accupyc 1330
Pycnometer. Their apparent density...was determined with mercury at 0.1 MPa in a
Micromeritics autopore IV 9500 mercury porosimeter. From the true and...
TITLE AUTHORS & PUBLICATION CITATION
Effects of lubricant on green strength,
compressibility and ejection of parts in die
compaction process
Enneti, Ravi K. / Lusin, Adam / Kumar, Sumeet /
German, Randall M. / Atre, Sundar V., Powder
Technology, 233, p.22-29, Jan 2013
..procedure [25] using an Arnold meter. The actual density was measured by helium
pycnometry (Model: Accupyc 1330, Vendor: Micromeritics) and the flowability was
measured by a Hall flow meter [26] . The properties of the powders used in...
Effects of magnesium for calcium
substitution in P 2 O 5 –CaO–TiO 2 glasses
Morikawa, Hiroshi / Lee, Sungho / Kasuga,
Toshihiro / Brauer, Delia S., Journal of Non-
Crystalline Solids, 380, p.53-59, Nov 2013
..theor = 2 M 2 I O + M II O + 2 M IV O 2 P 2 O 5 − 1 Glass density was measured
using a helium pycnometer (AccuPyc 1330-1000, Micromeritics GmbH, Aachen,
Germany); the estimated error limits are ± 0.01 g cm − 3 . Oxygen density was
calculated...
Efficiently trapping asphaltene-type materials
from direct coal liquefaction residue using
alkylsulfate-based ionic liquids
L Bai, Y Nie, J Huang, Y Li, H Dong, X Zhang - Fuel,
2013 - Elsevier
... The true densities of extracts were tested on a full-automatic true density type
analyzer AccuPycII1340 (Micromeritics, America) at room temperature. ... The
bands near 2920 cm −1 and 2855 cm −1 are due to aliphatic C H stretching
vibrations, which indicated that these extracts
Electrical monitoring of crack propagation
during quasi-static loading and ballistic
impact of alumina plates
Oberg, E.K. / Dunleavy, C.S. / Bourke, P. / Clyne,
T.W., Journal of the European Ceramic Society,
33 (13-14), p.2663-2675, Nov 2013
..porosity level is significantly higher in the low purity material. The density was
measured by He-Pycnometry, using a Micro Meritics AccuPyc 1330, and by
hydrostatic weighing in liquid C 11 H 20 . The Young's modulus (assumed isotropic)
was estimated...
Elemental distribution, solute solubility and
defect free volume in nanocrystalline
restricted-equilibrium Cu–Ag alloys
T Riedl / A Kirchner / K Eymann / A Shariq / R
Schlesiger / G Schmitz / M Ruhnow / B Kieback ,
Journal of Physics: Condensed Matter, 25 (11),
p.115401, Mar 2013
..Pore areas were evaluated with standard image-analysis software. Density
measurements were accomplished with a Micromeritics Accupyc 1330 He gas
pycnometer. For phase and strain analysis, x-ray diffraction (XRD) using a Bruker D8
Discover...
Elevated Pressure CO 2 Adsorption
Characteristics of K-promoted Hydrotalcites
for Pre-combustion Carbon Capture
Li, Shuang / Shi, Yixiang / Yang, Yi / Cai,
Ningsheng, Energy Procedia, 37, p.2224-2231,
Jan 2013
..determined by true density and tap density in our calculation, where the true
density is measured by a pycnometer (Micromeritics, AccuPyc 1330). Thus, we take
the true density instead of particle density, and calculation porosity cal instead of...
ENERGETIC SALTS: DEGRADATION AND
TRANSFORMATIONS Vadlamannati - 2013 - digitalcommons.uri.edu
... 3]. 2.2 Densities, Solubility and Melting Points of UN and NU Ten density
determinations for UN and NU products were obtained using a Micromeritics
AccuPyc 1340 gas pycnometer. For each determination a sample cup (1.0
Equilibrium and kinetic studies on acid dye
Acid Red 88 adsorption by magnetic ZnFe 2 O
4 spinel ferrite nanoparticles
Konicki, Wojciech / Sibera, Daniel / Mijowska,
Ewa / Lendzion-Bieluo, Zofia / Narkiewicz,
Urszula, Journal of Colloid and Interface Science,
398, p.152-160, May 2013
..by the Brunauer–Emmett–Teller (BET) method using the equipment Gemini 2360
of Micromeritics. The helium pycnometer AccuPyc 1330 of Micromeritics was
applied to determine the density of powders. The functional groups on the MNZnFe
surface...
Equilibrium and kinetic studies on acid dye
Acid Red 88 adsorption by magnetic ZnFe 2 O
4 spinel ferrite nanoparticles
Konicki, Wojciech / Sibera, Daniel / Mijowska,
Ewa / Lendzion-Bieluo, Zofia / Narkiewicz,
Urszula, Journal of Colloid and Interface Science,
398, p.152-160, May 2013
..determined by the Brunauer–Emmett–Teller (BET) method using the equipment
Gemini 2360 of Micromeritics. The helium pycnometer AccuPyc 1330 of
Micromeritics was applied to determine the density of powders. The functional
groups on the MNZnFe...
Evaluation of mechanical and physical
properties of industrial particleboard bonded
with a corn flour–urea formaldehyde
adhesive
Moubarik, Amine / Mansouri, Hamid Reza / Pizzi,
Antonio / Allal, Ahmed / Charrier, Fatima / Badia,
Miguel Angel / Charrier, Bertrand, Composites
Part B: Engineering, 44 (1), p.48-51, Jan 2013
..by measuring the mass and volume, while material density of the board was
measured with a Helium Pycnometer Accupyc 1330 (Micromeritics, USA). Porosity
was given by Rahman equation *23,24+ : e = 1 - ρ ap ρ m where e , ρ ap and ρ m
are...
TITLE AUTHORS & PUBLICATION CITATION
Evaluation on Properties of CaO–BaO–B 2 O 3
–Al 2 O 3 –SiO 2 Glass–Ceramic Sealants for
Intermediate Temperature Solid Oxide Fuel
Cells
Heydari, Fatemeh / Maghsoudipour, Amir /
Hamnabard, Zohreh / Farhangdoust, Sajad,
Journal of Materials Science & Technology, 29
(1), p.49-54, Jan 2013
..method (ASTM.C474-88) and powder density of the samples was measured with a
helium gas pycnometer (model Accupyc 1330, Micromeritics, Norcross, GA). The
relative density of the sintered specimens was determined by dividing bulk density
by...
Expansion of nanosized pores in low-
crystallinity nanoparticle-assembled plates
via a thermally induced increase in solid-state
density
Okada, Masahiro / Fujiwara, Keiko / Uehira,
Mayo / Matsumoto, Naoyuki / Takeda, Shoji,
Journal of Colloid and Interface Science, 405,
p.58-63, Sep 2013
..mercury intrusion porosimetry (AutoPore IV 9520; Micromeritics Instrument Corp.,
Norcross, GA), after the...samples were determined using helium pycnometry
(AccuPyc 1330; Micromeritics Instrument Corp.), after the samples were ground...
Expansion of nanosized pores in low-
crystallinity nanoparticle-assembled plates
via a thermally induced increase in solid-state
density
Okada, Masahiro / Fujiwara, Keiko / Uehira,
Mayo / Matsumoto, Naoyuki / Takeda, Shoji,
Journal of Colloid and Interface Science, 405,
p.58-63, Sep 2013
..determined using mercury intrusion porosimetry (AutoPore IV 9520; Micromeritics
Instrument Corp., Norcross, GA), after the...determined using helium pycnometry
(AccuPyc 1330; Micromeritics Instrument Corp.), after the samples were...
Fabrication of modified lithium orthosilicate
pebbles by addition of titania
Knitter, R. / Kolb, M.H.H. / Kaufmann, U. /
Goraieb, A.A., Journal of Nuclear Materials, 442
(1-3 Supplement 1), p.S433-S436, Nov 2013
..of 40 pebbles with a diameter of 1 mm. The material density of the pebbles was
measured by He pycnometry (AccuPyc 1330, Micromeritics) and the closed porosity
was calculated by considering the theoretical density of each composition. 3
Results...
Fabrication of the carbon paper by wet-laying
of ozone-treated carbon fibers with
hydrophilic functional groups
Kim, Hyunuk / Lee, Young-Ju / Lee, Dong-Chul /
Park, Gu-Gon / Yoo, Yoonjong, Carbon, 60, p.429-
436, Aug 2013
..ozone-treated CFs determined using helium pycnometry with a Micromeritics
AccuPyc II 1340 instrument is 1.93...mercury intrusion porosimetry (AutoPore IV
9500, Micromeritics). The CP from ozone-treated CFs showed higher...
Fabrication of the carbon paper by wet-laying
of ozone-treated carbon fibers with
hydrophilic functional groups
Kim, Hyunuk / Lee, Young-Ju / Lee, Dong-Chul /
Park, Gu-Gon / Yoo, Yoonjong, Carbon, 60, p.429-
436, Aug 2013
..CFs determined using helium pycnometry with a Micromeritics AccuPyc II 1340
instrument is...was measured by mercury intrusion porosimetry (AutoPore IV 9500,
Micromeritics). The CP from ozone-treated CFs showed higher...
Facile fabrication of Pickering emulsion
polymerized polystyrene/laponite composite
nanoparticles and their electrorheology
Kim, Young Jae / Liu, Ying Dan / Choi, Hyoung Jin
/ Park, Soo-Jin, Journal of Colloid and Interface
Science, 394, p.108-114, Mar 2013
..lower than that of pure laponite clay. On the other hand, the density measured
using a gas pyconometer (AccuPyc 1330, Micromeritics Instrucments Co., USA) was
1.19 g cm −3 , which is similar to the calculated density from the TGA analysis...
Filler aggregation as a reinforcement
mechanism in polymer nanocomposites
Dorigato, Andrea / Dzenis, Yuris / Pegoretti,
Alessandro, Mechanics of Materials, 61, p.79-90,
Jul 2013
..and nanofillers are reported in Table 1 . Density measurements were performed at
ambient temperature by using a Micromeritics Accupyc® 1330 helium pycnometer,
while surface area and porosity measurements were conducted by using an ASAP®
2010...
Flow and mixing efficiency characterisation in
a CO2-assisted single-screw extrusion process
by residence time distribution using Raman
spectroscopy
Common, Audrey / Rodier, Elisabeth / Sauceau,
Martial / Fages, Jacques, Chemical Engineering
Research and Design, In Press, Accepted
Manuscript,Oct 2013
..defined by: (13) S p i c = ∫ 0 ∞ I ( t ) d t 3.5 Sample characterisation Water and
helium pycnometry (Micromeritics, AccuPYC 1330) were used to determine
respectively, overall and closed porosity. The characterization of the porosity...
TITLE AUTHORS & PUBLICATION CITATION
Fluidized bed agglomeration of skim milk
powder: Analysis of sampling for the follow-
up of agglomerate growth
Turchiuli, Christelle / Smail, Ramdane /
Dumoulin, Elisabeth, Powder Technology, 238,
p.161-168, Apr 2013
..2 mm (5 min) (density tester, Varian, Fr). Particle true density was measured with
an air pycnometer (Accupyc, Micromeretics, Fr). Flowability was estimated from the
Carr and Hausner indexes (Carr index = ρ tapped /ρ bulk ; Hausner index...
Formation of TbCu 7 -type CeFe 10 Zr 0.8 by
rapid solidification
Zhou, Chen / Pinkerton, Frederick E. / Herbst, Jan
F., Journal of Alloys and Compounds, 569, p.6-8,
Aug 2013
..and cooling in the same Perkin Elmer TGA7 system under magnetic force. Density
was measured on powders using a Micromeritics AccuPyc II gas pycnometer. X-ray
diffraction patterns for the as-spun and annealed samples were collected in a
Rigaku...
Formulation of bioadhesive
hexylaminolevulinate pellets intended for
photodynamic therapy in the treatment of
cervical cancer
Hiorth, Marianne / Liereng, Linda / Reinertsen,
Reidun / Tho, Ingunn, International Journal of
Pharmaceutics, 441 (1-2), p.544-554, Jan 2013
..density of the pellets The true density of the pellet formulations was determined
with a helium gas pycnometer (AccuPyc 1330, Micromeritics Instrument
Corporation, Norcross, GA, USA). Reported results were the mean of three
independent experiments...
Functional poly(urethane-imide)s containing
Lewis bases for SO 2 detection by Love
surface acoustic wave gas micro-sensors
Ben Youssef, Ismaïl / Alem, Halima / Sarry,
Frédéric / Elmazria, Omar / Jimenez Rioboo,
Rafael / Arnal-Hérault, Carole / Jonquières, Anne,
Sensors and Actuators B: Chemical, 185, p.309-
320, Aug 2013
..PTFE plate, small polymer disks were cut using a sharp die. Density measurements
were carried out with a helium Micromeritics AccuPyc 1330 gas pycnometer using
ca. 300 mg of pieces of polymeric films (film thickness: ca. 40 μm). Thermal...
Fused calcium zirconate for refractory
applications
Schafföner, Stefan / Aneziris, Christos G. / Berek,
Harry / Hubálková, Jana / Priese, Angelika,
Journal of the European Ceramic Society, 33 (15-
16), p.3411-3418, Dec 2013
..and the solid state synthesized CaZrO 3 were investigated regarding the true
density in a helium pycnometer (Accupyc 1330, Micromeritics GmbH, Aachen,
Germany) according to the standard DIN 66137-2. In a next step test cylinders (50
mm...
Glass formation, physicochemical
characterization and photoluminescence
properties of new Sb 2 O 3 –PbO–ZnO and Sb
2 O 3 –PbO–ZnS systems
Nouadji, M. / Ivanova, Z.G. / Poulain, M. /
Zavadil, J. / Attaf, A., Journal of Alloys and
Compounds, 549, p.158-162, Feb 2013
..C for 8 h and cooled down in the annealing furnace. The density was determined
using a helium picnometer (Micromeritics, AccuPyc 1330), with ±0.001 g/cm 3
accuracy. The microhardness values were taken by Matzuzawa MXT 70 digital
microhardness...
High temperature structural and magnetic
properties of cobalt nanorods
Ait Atmane, Kahina / Zighem, Fatih / Soumare,
Yaghoub / Ibrahim, Mona / Boubekri, Rym /
Maurer, Thomas / Margueritat, Jérémie / (...) /
Viau, Guillaume, Journal of Solid State Chemistry,
197, p.297-303, Jan 2013
..respectively 0.26 g and 2.13 g cm –3 . The true density of the powder, obtained at
298 K using a helium Accupyc 1330 pycnometer from Micromeritics, was found to
be 6.76±0.41 g cm –3 . The packing factor, defined as the ratio of the volume...
Highly biocompatible, nanocrystalline
hydroxyapatite synthesized in a solvothermal
process driven by high energy density
microwave radiation
Smolen, Dariusz / Chudoba, Tadeusz / Malka,
Iwona / Kedzierska, Aleksandra / Lojkowski,
Witold / Swieszkowski, Wojciech / Kurzydlowski,
Krzysztof Jan / (...) / Lewandowska-Szumiel,
Małgorzata, International Journal of
Nanomedicine, 8, p.653-668, Jan 2013
..performed using a helium pycnometer (AccuPyc, model 1330; Micromeritics,
Gosford, Australia) using an in-house...powders was measured by the BET method
(AccuPyc, model Gemini 2360; Micromeritics). The average diameter of the
particles...
TITLE AUTHORS & PUBLICATION CITATION
Highly biocompatible, nanocrystalline
hydroxyapatite synthesized in a solvothermal
process driven by high energy density
microwave radiation
Smolen, Dariusz / Chudoba, Tadeusz / Malka,
Iwona / Kedzierska, Aleksandra / Lojkowski,
Witold / Swieszkowski, Wojciech / Kurzydlowski,
Krzysztof Jan / (...) / Lewandowska-Szumiel,
Małgorzata, International Journal of
Nanomedicine, 8, p.653-668, Jan 2013
..using a helium pycnometer (AccuPyc, model 1330; Micromeritics, Gosford,
Australia) using an in-house procedure...was measured by the BET method
(AccuPyc, model Gemini 2360; Micromeritics). The average diameter of the particles
was...
HydrSothermal treatment kinetics of tannin
for producing carbonaceous microspheres
Braghiroli, F.L. / Fierro, V. / Izquierdo, M.T. /
Parmentier, J. / Pizzi, A. / Celzard, A., Bioresource
Technology, In Press, Accepted Manuscript,Oct
2013
..3 ), was measured by helium pycnometry (Accupyc II 1340, Micromeritics, USA) for
all samples after HTC. Samples were...determined by krypton adsorption at -196°C
using a Micromeritics ASAP 2020 automatic apparatus. Samples were...
Indium doped niobium phosphates as
intermediate temperature proton conductors
Huang, Yunjie / Li, Qingfeng / Anfimova, Tatiana
V. / Christensen, Erik / Yin, Min / Jensen, Jens
Oluf / Bjerrum, Niels J. / Xing, Wei, International
Journal of Hydrogen Energy, 38 (5), p.2464-2470,
Feb 2013
..SEM) measurements were performed on a Carl Zeiss EVO MA10 microscope. The
density of powder was measured by Micromeritics AccuPyc 1330. 2.2.2 Conductivity
measurement For conductivity measurements, the phosphate powders were first
pressed...
Influence of MCC II fraction and storage
conditions on pellet properties
Krueger, Cornelia / Thommes, Markus /
Kleinebudde, Peter, European Journal of
Pharmaceutics and Biopharmaceutics, In Press,
Corrected Proof,Jul 2013
..6 Porosity, shrinking The helium density ( ρ He ) of the pellets was determined by a
helium pycnometer (AccuPyc, Micromeritics, Moenchengladbach, Germany). For
each tested pellet batch, three samples were analyzed. The apparent density...
Influence of Ni nanoparticle addition and
spark plasma sintering on the TiNiSn–Ni
system: Structure, microstructure, and
thermoelectric properties
Birkel, Christina S. / Douglas, Jason E. / Lettiere,
Bethany R. / Seward, Gareth / Zhang, Yichi /
Pollock, Tresa M. / Seshadri, Ram / Stucky, Galen
D., Solid State Sciences, 26, p.16-22, Dec 2013
..molar heat capacity, C p = 3 R , were utilized. Densities were obtained on the same
pieces using a pycnometer (Micromeritics AccuPyc 1330 Pycnometer) and were
found to be ≥99% of the theoretical density. For microstructural investigations...
Influence of powder characteristics on the
behaviour of PIM feedstock
Bricout, Julien / Gelin, Jean-Claude / Ablitzer,
Carine / Matheron, Pierre / Brothier, Meryl,
Chemical Engineering Research and Design, In
Press, Corrected Proof,Mar 2013
..13,320 particle size analyser), pycnometer density (obtained by with Micromeritics
AccuPyc II 1340), the Specific surface area (obtained by Micromeritics ASAP2020),
and the apparent and tap density (NF EN ISO 3953). Scanning Electron...
Influence of process parameters and
equipment on dry foam formulation
properties using indomethacin as model drug
Sprunk, Angela / Page, Susanne / Kleinebudde,
Peter, International Journal of Pharmaceutics,
455 (1-2), p.189-196, Oct 2013
..density ( ρ ), determined by AccuPyc 1330 V3.03 (Micromeritics, USA), tablet
volume ( V...analysis using a SmartPrep (Micromeritics, USA). The adsorbed
amount...using a Gemini 2375 V4.02 (Micromeritics, USA). SSA was calculated...
Influence of process parameters and
equipment on dry foam formulation
properties using indomethacin as model drug
Sprunk, Angela / Page, Susanne / Kleinebudde,
Peter, International Journal of Pharmaceutics,
455 (1-2), p.189-196, Oct 2013
..by AccuPyc 1330 V3.03 (Micromeritics, USA), tablet volume ( V...analysis using a
SmartPrep (Micromeritics, USA). The adsorbed amount...p 0 in duplicates using a
Gemini 2375 V4.02 (Micromeritics, USA). SSA was calculated...
TITLE AUTHORS & PUBLICATION CITATION
Influence of the membrane treatment on
structure and properties of sulfonated
poly(etheretherketone) semi-
interpenetrating polymer network
Delhorbe, Virginie / Cailleteau, Céline / Chikh,
Linda / Guillermo, Armel / Gebel, Gérard / Morin,
Arnaud / Fichet, Odile, Journal of Membrane
Science, 427, p.283-292, Jan 2013
..thicknesses of the dry and wet membranes, respectively. Density measurements
were performed with a Accupyc II 1340 gas pycnometer from Micromeritics. All
samples were dried 12 h at 40 °C under vacuum prior to measurements. Pulse Field
Gradient...
Influence of thermoplastic properties on
coking pressure generation: Part 3 – Evidence
and role of pore coalescence in the
mechanism for pressure generation
Duffy, John J. / Scholes, Oliver / Mahoney,
Merrick R. / Steel, Karen M., Fuel, 103, p.711-
718, Jan 2013
..coke samples (approximately 0.2 g) using a Micromeritics Autopore IV
Porosimeter. Tests were performed...pycnometry Helium pycnometry was
performed using a Micromeritics Accupyc 1330 Pycnometer with 10 cm 3 sample
holder. Prior...
Influence of thermoplastic properties on
coking pressure generation: Part 3 – Evidence
and role of pore coalescence in the
mechanism for pressure generation
Duffy, John J. / Scholes, Oliver / Mahoney,
Merrick R. / Steel, Karen M., Fuel, 103, p.711-
718, Jan 2013
..coke samples (approximately 0.2 g) using a Micromeritics Autopore IV
Porosimeter. Tests were performed in two...pycnometry Helium pycnometry was
performed using a Micromeritics Accupyc 1330 Pycnometer with 10 cm 3 sample
holder...
Interactions of heat and mass transfer in
steam reheating of starchy foods
Huang, Shih-Rong / Yang, Jing-Iong / Lee, Yeun-
Chung, Journal of Food Engineering, 114 (2),
p.174-182, Jan 2013
..density method ( Rahman, 2009 ). The true volume of freeze dried steamed bun
was measured by using the AccuPyc 1340 Pyconmeter (Micromeritics, Georgia) and
helium was used as a displaced fluid to ensure the best accuracy. Water was
assumed...
Jet mill grinding of portland cement,
limestone, and fly ash: Impact on particle
size, hydration rate, and strength
Sun, Hongfang / Hohl, Brian / Cao, Yizheng /
Handwerker, Carol / Rushing, Todd S. / Cummins,
Toney K. / Weiss, Jason, Cement and Concrete
Composites, 44, p.41-49, Nov 2013
..32] . Methanol was used as a dispersant. The densities required for PSD calculation
were measured by a Micromeritics Accupyc 1330 pycnometer. All mortars were
prepared in a Hobart mixer following ASTM C 305. After casting, the specimens...
LAS glass–ceramic scaffolds by three-
dimensional printing
Zocca, Andrea / Gomes, Cynthia M. / Bernardo,
Enrico / Müller, Ralf / Günster, Jens / Colombo,
Paolo, Journal of the European Ceramic Society,
33 (9), p.1525-1533, Aug 2013
..saturated and suspended mass, while the density of the crystallized powder was
measured with a pycnometer (AccuPyc 1340, Micromeritics Italia, Milano, Italy). 3
Results and discussion 3.1 Characterization of the glass–ceramic powder...
Lignin–phenol–formaldehyde aerogels and
cryogels
Grishechko, L.I. / Amaral-Labat, G. / Szczurek, A. /
Fierro, V. / Kuznetsov, B.N. / Celzard, A.,
Microporous and Mesoporous Materials, 168,
p.19-29, Mar 2013
..Envelope Density Analyser (Micromeritics, USA). A quantity of DryFlo...was
measured with an Accupyc II 1340 helium pycnometer (Micromeritics, USA). For
avoiding errors related...adsorption apparatus (Micromeritics, USA). The samples
were...
Local microarchitecture affects mechanical
properties of deposited extracellular matrix
for osteonal regeneration
Pilia, M. / Guda, T. / Pollot, B. / Aguero, V. /
Appleford, M., Materials Science and
Engineering: C, In Press, Accepted
Manuscript,Oct 2013
..volume fraction of the scaffold. True solid volumes of the scaffolds were measured
using helium pycnometry (AccuPyc 1340, Micromeritics, Norcross, GA). The length
and diameter of each scaffold were measured by averaging across three
independent...
Local solidosity of microcrystalline cellulose
during dead-end filtration and sedimentation
Mattsson, Tuve / Martínez, Eduard Laguarda /
Sedin, Maria / Theliander, Hans, Chemical
Engineering Research and Design, 91 (6), p.1155-
1162, Jun 2013
..method), with nitrogen as the adsorption gas (Micromeritics Tristar 3000); the
particle size distribution...and the solid density was determined using a
Micromeritics Accupyc 1330. The shape of the particles was investigated...
TITLE AUTHORS & PUBLICATION CITATION
Local solidosity of microcrystalline cellulose
during dead-end filtration and sedimentation
Mattsson, Tuve / Martínez, Eduard Laguarda /
Sedin, Maria / Theliander, Hans, Chemical
Engineering Research and Design, 91 (6), p.1155-
1162, Jun 2013
..method), with nitrogen as the adsorption gas (Micromeritics Tristar 3000); the
particle size distribution was measured...and the solid density was determined using
a Micromeritics Accupyc 1330. The shape of the particles was investigated...
Low sintering temperature of ZnNb 2 O 6 for silver co-sintering
Quercioli, Regis / Bernard, Jerome / Haussonne,
Jean-Marie / Reboul, Jean-Michel / Houivet,
David, Ceramics International, In Press, Corrected
Proof,Jul 2013
..SEM, and BET specific surface measurements were made with a Micromeritics
TriStarII. Glass frits were added to ZnNb 2 O 6 with...analysed by XRD and their
density was measured with Micrometrics AccuPyc 1330 He pycnometer. Open
porosity was estimated by calculating...
Macadamia nut shell-derived carbon
composites for post combustion CO 2 capture Bae, Jun-Seok / Su, Shi, International Journal of
Greenhouse Gas Control, 19, p.174-182, Nov 2013
..out using volumetric gas adsorption analyzers (Micromeritics TriStar 3000 and
ASAP2020HD). The helium densities...carbons were measured using a helium
pycnometer (Micromeritics AccuPyc 1340). The MPSDs of samples were obtained
from...
Macadamia nut shell-derived carbon
composites for post combustion CO 2 capture Bae, Jun-Seok / Su, Shi, International Journal of
Greenhouse Gas Control, 19, p.174-182, Nov 2013
..out using volumetric gas adsorption analyzers (Micromeritics TriStar 3000 and
ASAP2020HD). The helium densities of...carbons were measured using a helium
pycnometer (Micromeritics AccuPyc 1340). The MPSDs of samples were obtained...
Magnetic susceptibility and hardness of Au –x
Pt –y Nb alloys for biomedical applications
Uyama, Emi / Inui, Shihoko / Hamada, Kenichi /
Honda, Eiichi / Asaoka, Kenzo, Acta Biomaterialia,
9 (9), p.8449-8453, Sep 2013
..v was not calculated. The specimen volume was measured five times for each
specimen using a gas pycnometer (Accupyc 1330, Micromeritics Instrument Corp.,
USA) at RT. χ v was calculated from these two data. 2.3 Vickers hardness and
phase...
Measurements and Design Calculations for a
Deep Coaxial Borehole Heat Exchanger in
Aachen, Germany
Dijkshoorn, Lydia / Speer, Simon / Pechnig,
Renate, International Journal of Geophysics,
2013, p.1-14, Jan 2013
..geophysical logs. Matrix density of the cuttings (Figure 3) is measured with a
helium gas pycnometer (Accupyc by Micromeritics [3]). The device calculates the
matrix density from the amount of helium saturating the pores of the dried...
Mechanistic characterization of bilayer tablet
formulations
Akseli, Ilgaz / Abebe, Admassu / Sprockel, Omar /
Cuitiño, Alberto M., Powder Technology, 236,
p.30-36, Feb 2013
..behavior seen with pharmaceutical materials. The true densities of powders were
measured by helium pycnometry (AccuPyc 1330, Micromeritics Instrument Corp.,
Norcross, GA) in triplicate using fresh samples each time. For MCC and
pregelatinized...
Mercury(II) removal from aqueous solution
by sorption onto alginate, pectate and
polygalacturonate calcium gel beads. A
kinetic and speciation based equilibrium study
Cataldo, Salvatore / Gianguzza, Antonio /
Pettignano, Alberto / Villaescusa, Isabel, Reactive
and Functional Polymers, 73 (1), p.207-217, Jan
2013
..values were measured by a pycnometer at T = 20 °C. Further measurements were
done with a helium pycnometer (Micromeritics AccuPyc 1330) in order to confirm
the density values previously obtained. The water content and the weight swelling
ratio...
Microstructural investigations of natural and
synthetic graphites and semi-graphites
Rodrigues, Sandra / Marques, Manuela / Suárez-
Ruiz, Isabel / Camean, Ignacio / Flores, Deolinda /
Kwiecinska, Barbara, International Journal of Coal
Geology, 111, p.67-79, May 2013
..Helium density and chemical analysis Density measurements of the samples were
made with a Helium Pycnometer Accupyc 1330 from Micromeritics. For this
purpose the samples were degassed at 100 °C and held overnight in vacuum. The
overall error...
TITLE AUTHORS & PUBLICATION CITATION
Microstructure and mechanical properties of
Ni/10 mol% Sc 2 O 3 –1 mol% CeO 2 –ZrO 2
cermet anode for solid oxide fuel cells
Chen, Yan / Orlovskaya, Nina / Graule, Thomas /
Kuebler, Jakob, Journal of the European Ceramic
Society, 33 (3), p.557-564, Mar 2013
..reduction were measured using mercury porosimetry (Pascal 140 and 440,
POROTEC, Italy) and He-pycnometry (AccuPyc 1330, Micromeritics, USA). The
specific surface areas were determined using N 2 adsorption isotherm by BET
measurements (Beckman-Coulter...
Mixed alkali effects in Bioglass® 45S5 Tylkowski, M. / Brauer, D.S., Journal of Non-
Crystalline Solids, 376, p.175-181, Sep 2013
..Density (ρ glass ) was measured on glass monoliths (approximately 10 g in weight)
in a helium pycnometer (AccuPyc 1330-1000, Micromeritics GmbH, Aachen,
Germany). The estimated error limits are ± 0.01 g cm − 3 . Oxygen density was
calculated...
Mixed matrix membranes containing MOFs
for ethylene/ethane separation Part A:
Membrane preparation and characterization
Ploegmakers, Jeroen / Japip, Susilo / Nijmeijer,
Kitty, Journal of Membrane Science, 428, p.445-
453, Feb 2013
..663 FeBTC 1300–1600 – 1.677 MIL-53 1100–1500 31.55 1.642 ⁎ Experimentally
determined with Micromeritics AccuPyc 1330 pycnometer. Table 2 Fit results of the
sorption isotherms of ethylene and ethane using the Sips model for...
Mixed matrix membranes containing MOFs
for ethylene/ethane separation—Part B:
Effect of Cu 3 BTC 2 on membrane transport
properties
Ploegmakers, Jeroen / Japip, Susilo / Nijmeijer,
Kitty, Journal of Membrane Science, 428, p.331-
340, Feb 2013
..was calculated from the volume of the sample (calculated from the density of the
sample as determined using a Micromeritics AccuPyc 1330 pycnometer at 26.0±0.8
°C), the mass uptake of gas of the sample, and the molar volume and molecular...
Mixing variables for prebaked anodes used in
aluminum production
Azari, Kamran / Alamdari, Houshang / Aryanpour,
Gholamreza / Picard, Donald / Fafard, Mario /
Adams, Angelique, Powder Technology, 235,
p.341-348, Feb 2013
..and a helium pycnometer (Micromeritics, AccuPyc II 1340) was used to
measure...100 A mercury porosimeter (Micromeritics, AutoPore IV) was used
to...measured using BET method (Micromeritics, TriStar II). 3 Results...
Mixing variables for prebaked anodes used in
aluminum production
Azari, Kamran / Alamdari, Houshang / Aryanpour,
Gholamreza / Picard, Donald / Fafard, Mario /
Adams, Angelique, Powder Technology, 235,
p.341-348, Feb 2013
..and a helium pycnometer (Micromeritics, AccuPyc II 1340) was used...100 A
mercury porosimeter (Micromeritics, AutoPore IV) was used to measure
the...measured using BET method (Micromeritics, TriStar II). 3 Results...
Mixing variables for prebaked anodes used in
aluminum production
Azari, Kamran / Alamdari, Houshang / Aryanpour,
Gholamreza / Picard, Donald / Fafard, Mario /
Adams, Angelique, Powder Technology, 235,
p.341-348, Feb 2013
..and a helium pycnometer (Micromeritics, AccuPyc II 1340) was used...100 A
mercury porosimeter (Micromeritics, AutoPore IV) was used to...measured using
BET method (Micromeritics, TriStar II). 3 Results 3.1 Green...
Modelling and optimizing the gas-lift effect
system for texturing silicon M Amouzgar / M Kahrizi , Journal of Physics D:
Applied Physics, 46 (13), p.135107, Apr 2013
..viscosity was measured using a Paar Phisica MCR 500 Rheometer. The density of
the liquid was measured using a Micromeritics Accupyc II 1340 Pycnometer. The
average velocity in the GLE system was calculated by measuring the time it took a
red...
Modifications on Microporosity and Physical
Properties of Cement Mortar Caused by
Carbonation: Comparison of Experimental ...
Pham, Son Tung, Advances in Materials Science
and Engineering, 2013, p.1-9, Jan 2013
..layers. The specific surface area analyser Micromeritics Gemini VII was used for
this test. From adsorption...volume of the sample using the ideal gas law.
Micromeritics helium pycnometer AccuPyc II 1340 was used for this measurement.
...
TITLE AUTHORS & PUBLICATION CITATION
Modifications on Microporosity and Physical
Properties of Cement Mortar Caused by
Carbonation: Comparison of Experimental ...
Pham, Son Tung, Advances in Materials Science
and Engineering, 2013, p.1-9, Jan 2013
..the layers. The specific surface area analyser Micromeritics Gemini VII was used for
this test. From adsorption desorption...actual volume of the sample using the ideal
gas law. Micromeritics helium pycnometer AccuPyc II 1340 was used for this...
MOF and UiO-67/MCM-41 adsorbents for
pre-combustion CO 2 capture by PSA:
Breakthrough experiments and process
design
Casas, Nathalie / Schell, Johanna / Blom, Richard
/ Mazzotti, Marco, Separation and Purification
Technology, 112, p.34-48, Jul 2013
..been produced. The material density and the particle density have been
characterized by Helium pycnometery (AccuPyc 1330, Micromeritics, Brussels,
Belgium) and by Hg-pycnometery (Pascal 140 and Pascal 440, Thermo Fisher
Scientific, Reinach...
Molten salt synthesis and characterization of
SiC coated carbon black particles for
refractory castable applications
Ye, Jianke / Zhang, Shaowei / Lee, William E.,
Journal of the European Ceramic Society, 33 (10),
p.2023-2029, Sep 2013
..CB and as-prepared SiC coated CB after ultrasonic dispersion were determined
using a Helium Pycnometer (AccuPyc II 1340, Micromeritics Instruments). Zeta
potential values were measured using a ZetaProbe Analyzer (Colloidal Dynamics Pty
Ltd...
Morphological and Cell Growth Assessment
in Near Dense Hydroxyapatite Scaffold
Wiria, Florencia Edith / Tay, Bee Yen /
Ghassemieh, Elaheh, Journal of Materials, 2013,
p.1-8, Jan 2013
..porosity of the scaffold was indirectly calculated from the sample’s true volume,
measured using a pycnometer (Micromeritics, AccuPyc 1330). Ten samples were
used for the measurement ( ). 2.3. Hardness Measurement Hardness
measurement...
New chemically reworkable epoxy coatings
obtained by the addition of polyesters with
star topologies to diglycidyl ether of
bisphenol A resins
Tomuta, Adrian M. / Ramis, Xavier / Fernández-
Francos, Xavier / Ferrando, Francesc / Serra,
Angels, Progress in Organic Coatings, 76 (11),
p.1616-1624, Nov 2013
..and 100.6 MHz 13 C NMR spectra were obtained with a Varian Gemini 400
spectrometer with Fourier transformed. 1 H NMR spectra...materials before and
after curing, which were determined using a Micromeritics AccuPyc 1330 Gas
Pycnometer thermostatized at 40 °C. The...
New chemically reworkable epoxy coatings
obtained by the addition of polyesters with
star topologies to diglycidyl ether of
bisphenol A resins
Tomuta, Adrian M. / Ramis, Xavier / Fernández-
Francos, Xavier / Ferrando, Francesc / Serra,
Angels, Progress in Organic Coatings, 76 (11),
p.1616-1624, Nov 2013
..shrinkage was calculated from the densities of the materials before and after
curing, which were determined using a Micromeritics AccuPyc 1330 Gas
Pycnometer thermostatized at 40 °C. The shrinkage during curing was determined
as: (3) % shrinkage...
New electrorheological fluid obtained from
mercaptosilsesquioxane-modified silicate
suspensions
Marins, Jéssica A. / Dahmouche, Karim / Soares,
Bluma G., Materials Science and Engineering: C,
33 (1), p.133-139, Jan 2013
..2.4 Sample characterization The density of SiO 2 /SSQ-SH was determined by using
a helium picnometric of Micromeritics AccuPyc 133Q V2.03N, at 25 °C. Fourier
transform infrared spectra by KBr pellet were recorded in a Bruker spectrometer...
New insight into artifactual phenomena
during in vitro toxicity assessment of
engineered nanoparticles: Study of TNF-α
adsorption on alumina oxide nanoparticle
Pailleux, Mélanie / Boudard, Delphine / Pourchez,
Jérémie / Forest, Valérie / Grosseau, Philippe /
Cottier, Michèle, Toxicology in Vitro, 27 (3),
p.1049-1056, Apr 2013
..adsorption at 77 K after out-gassing for 2 h at 200 °C (Micromeritics ASAP 2000),
using the Brunauer–Emmet–Teller (BET...densities were determined using a gas
pycnometer (Micrometrics AccuPyc 1330) working under a helium atmosphere.
Results are expressed...
New tannin–lignin aerogels
Grishechko, L.I. / Amaral-Labat, G. / Szczurek, A. /
Fierro, V. / Kuznetsov, B.N. / Pizzi, A. / Celzard,
A., Industrial Crops and Products, 41, p.347-355,
Jan 2013
..Envelope Density Analyser (Micromeritics, USA). The skeletal density...measured
by helium pycnometry (Accupyc II 1340, Micromeritics, USA) using finely crushed
samples for...automatic apparatus (ASAP 2020, Micromeritics, USA). The samples
were first...
TITLE AUTHORS & PUBLICATION CITATION
Nitramines with Varying Sensitivities:
Functionalized
Dipyrazolyl-N-nitromethanamines as
Energetic Materials
J Zhang, C He, DA Parrish… - Chemistry-A
European …, 2013 - Wiley Online Library
... Densities were measured at room temperature by using a Micromeritics AccuPyc
1330 gas pycnometer. Elemental analyses were carried out on an Exeter CE-440
elemental analyzer. The mass spectra were obtained by using a Shimadzu GCMS-
QP5050A mass spectrometer.
Novel flexible aerogels derived from
methyltrimeth...
Aravind, Parakkulam Ramaswamy / Niemeyer,
Philipp / Ratke, Lorenz, Microporous and
Mesoporous Materials, 181, p.111-115, Nov 2013
..was used to determine the skeletal density using Micromeritics AccuPyc II 1340
and the value was found to be 1.43 g/cm 3...adsorption at 77 K (using a Tristar II
3020, from Micromeritics, Norcross, USA). The specific surface area...
Novel flexible aerogels derived from
methyltrimeth...
Aravind, Parakkulam Ramaswamy / Niemeyer,
Philipp / Ratke, Lorenz, Microporous and
Mesoporous Materials, 181, p.111-115, Nov 2013
..used to determine the skeletal density using Micromeritics AccuPyc II 1340 and the
value was found to be 1...determined by N 2 adsorption at 77 K (using a Tristar II
3020, from Micromeritics, Norcross, USA). The specific surface area...
Novel polyvinyl alcohol nanocomposites
containing carbon nano-tubes with Fe 3 O 4
pendants for alkaline fuel cell applications
Lo, Chieh-Fang / Wu, Jung-Fen / Li, Hsieh-Yu /
Hung, Wei-Song / Shih, Chao-Ming / Hu, Chien-
Chieh / Liu, Ying-Ling / Lue, Shingjiang Jessie,
Journal of Membrane Science, 444, p.41-49, Oct
2013
..were determined using a gas pycnometer (AccuPyc II 1340, Micromeritics,
Norcross, GA, USA) using Archimedes's...which was measured using a gas
pycnometer, AccuPyc II 1340, Micromeritics, Norcross, GA, USA). V W is the van...
Novel processing of iron–manganese alloy-
based biomaterials by inkjet 3-D printing
Chou, Da-Tren / Wells, Derrick / Hong, Daeho /
Lee, Boeun / Kuhn, Howard / Kumta, Prashant N.,
Acta Biomaterialia, 9 (10), p.8593-8603, Nov 2013
..sintered 3-DP parts were measured using an AccuPyc II 1340 helium pycnometer
(Micromeritics, Norcross, GA). The envelope density...parts was measured using a
GeoPyc 1360 (Micromeritics). Using these density values, the percent...
On the influence of silica type on the
structural integrity of dense La 9.33 Si 2 Ge 4
O 26 electrolytes for SOFCs
Alves, C. / Marcelo, T. / Oliveira, F.A.C. / Alves,
L.C. / Mascarenhas, J. / Trindade, B., Journal of
the European Ceramic Society, 33 (12), p.2251-
2258, Oct 2013
..determined by laser scattering (Cilas 1064, France). True density measurements
were carried out using a AccuPyc 1330 Helium pycnometer (Micromeritics Int.
Corp., USA). Further data on the characterization of the raw materials as well as
experimental...
Paper-derived hydroxyapatite Stares, Steferson Luiz / Fredel, Márcio Celso /
Greil, Peter / Travitzky, Nahum, Ceramics
International, 39 (6), p.7179-7183, Aug 2013
..a digital dial indicator. Skeletal density ( ρ skeletal ) of the samples was measured
by He-Pycnometry (AccuPyc 1330, Micromeritics Instrument Corporation, Norcross,
GA, USA). Total porosity of the samples ( P p ) was derived from fractional...
Paper-derived β -TCP Stares, S.L. / Fredel, M.C. / Greil, P. / Travitzky,
N., Materials Letters, 98, p.161-163, May 2013
..a digital dial indicator. Skeletal density ( ρ skeletal ) of the samples was measured
by He-Pycnometry (AccuPyc 1330, Micromeritics Instrument Corporation, Norcross,
GA, USA). Total porosity of the samples ( P p ) was derived from fractional...
Performance of a bauxite waste as oxygen-
carrier for chemical-looping combustion
using coal as fuel
Mendiara, T. / Gayán, P. / Abad, A. / de Diego,
L.F. / García-Labiano, F. / Adánez, J., Fuel
Processing Technology, 109, p.57-69, May 2013
..measured by Hg intrusion in a Quantachrome PoreMaster 33. The real density of
the particles was measured with a Micromeritics AccuPyc II 1340 helium
picnometer. Brunauer–Emmett–Teller (BET) surface area value was measured and a
low value...
Performance of CLOU process in the
combustion of different types of coal with CO
2 capture
Adánez-Rubio, I. / Abad, A. / Gayán, P. / de
Diego, L.F. / García-Labiano, F. / Adánez, J.,
International Journal of Greenhouse Gas Control,
12, p.430-440, Jan 2013
..pores, was determined by He picnometry in a Micromeritics AccuPyc II 1340. The
surface area of the oxygen carrier...adsorption/desorption of nitrogen at 77 K in a
Micromeritics ASAP-2020 (Micromeritics Instruments Inc.), whereas the pore
volumes...
TITLE AUTHORS & PUBLICATION CITATION
Phosphorus flame retardant polybenzoxazine
foams based on renewable diphenolic acid
Zúñiga, Camilo / Larrechi, Maria Soledad /
Lligadas, Gerard / Ronda, Juan Carlos / Galià,
Marina / Cádiz, Virginia, Polymer Degradation
and Stability, In Press, Corrected Proof,Oct 2013
..P (161.9 MHz) NMR spectra were obtained using a Varian Gemini 400
spectrometer with Fourier transform and DMSO-d 6...The closed-cell volume
percentage was determined with a Micromeritics AccuPyc 1330 Gas Pycnometer
thermostatized at 40 °C, using...
Phosphorus flame retardant polybenzoxazine
foams based on renewable diphenolic acid
Zúñiga, Camilo / Larrechi, Maria Soledad /
Lligadas, Gerard / Ronda, Juan Carlos / Galià,
Marina / Cádiz, Virginia, Polymer Degradation
and Stability, In Press, Corrected Proof,Oct 2013
..least three measurements using different specimen. The closed-cell volume
percentage was determined with a Micromeritics AccuPyc 1330 Gas Pycnometer
thermostatized at 40 °C, using argon as gas according to a modification of ASTM
D6226-10...
Photovoltaic's silica-rich waste sludge as
supplementary cementitious material (SCM)
Quercia, G. / van der Putten, J.J.G. / Hüsken, G. /
Brouwers, H.J.H., Cement and Concrete
Research, 54, p.161-179, Dec 2013
..physical adsorption isotherm (BET method) A Micromeritics TriStar 3000
equipment using N 2 with a soaking...density by helium pycnometry A helium
pycnometer AccuPyc® II 1340 from Micromeritics was used to determine the
specific density of...
Photovoltaic's silica-rich waste sludge as
supplementary cementitious material (SCM)
Quercia, G. / van der Putten, J.J.G. / Hüsken, G. /
Brouwers, H.J.H., Cement and Concrete
Research, 54, p.161-179, Dec 2013
..Nitrogen physical adsorption isotherm (BET method) A Micromeritics TriStar 3000
equipment using N 2 with a soaking time of 12...pycnometry A helium pycnometer
AccuPyc® II 1340 from Micromeritics was used to determine the specific density of
the...
Physical characterization of sweet sorghum
bagasse, tobacco residue, soy hull and fiber
sorghum bagasse particles: Density, particle
size and shape distributions
Cardoso, C.R. / Oliveira, T.J.P. / Santana Junior,
J.A. / Ataíde, C.H., Powder Technology, 245,
p.105-114, Sep 2013
..five analyses for each biomass. 2.4 True density A Micromeritics AccuPyc 1331 gas
pycnometer with a measuring sensitivity of...ranges of the same material due to the
equipment (AccuPyc 1331) precision. The objective of these measurements...
Physical property behaviour of North Dakota
lignite in an oxygen/steam blown moving bed
gasifier
Mangena, S.J. / Bunt, J.R. / Waanders, F.B., Fuel
Processing Technology, 106, p.326-331, Feb 2013
..was of an approximately 10 g sample was determined for the gasifier turn-out
samples (crushed to below 1 mm), using a Micromeretics Accupyc instrument. The
crushed samples were dried overnight in an oven at 105 °C and then cooled in a
desiccator prior...
Poly-lactide- co -glycolide nanoparticles
containing voriconazole for pulmonary
delivery: in vitro and in vivo study
Sinha, Biswadip / Mukherjee, Biswajit / Pattnaik,
Gurudutta, Nanomedicine: Nanotechnology,
Biology and Medicine, 9 (1), p.94-104, Jan 2013
..mercury porosimeter (AutoPore IV 9500; Micromeritics Instruments, Norcross,
USA) at the lowest...density of the particles was measured using an AccuPyc 1340
helium pycnometer (Micromeritics Instruments) with a 1-mL sample chamber...
Poly-lactide- co -glycolide nanoparticles
containing voriconazole for pulmonary
delivery: in vitro and in vivo study
Sinha, Biswadip / Mukherjee, Biswajit / Pattnaik,
Gurudutta, Nanomedicine: Nanotechnology,
Biology and Medicine, 9 (1), p.94-104, Jan 2013
..was determined using a mercury porosimeter (AutoPore IV 9500; Micromeritics
Instruments, Norcross, USA) at the lowest...measured using an AccuPyc 1340
helium pycnometer (Micromeritics Instruments) with a 1-mL sample chamber
using...
Porcelain containing anatase and rutile
nanocrystals
Bouzidi, N. / Bouzidi, A. / Gaudon, P. / Merabet,
D. / Blanchart, P., Ceramics International, 39 (1),
p.489-495, Jan 2013
..were achieved by the Archimedes's method in water, and absolute densities were
measured by helium pycnometry (Micromeritics AccuPyc). Bulk and absolute
densities were used to calculate the total porosity of samples. The dielectric
properties...
Porous materials for alkali contaminated
environments
Brachhold, Nora / Aneziris, Christos G., Journal of
the European Ceramic Society, 33 (10), p.2013-
2021, Sep 2013
..volumeter. Total porosity was calculated from the true density of the material
measured by He-pycnometer AccuPyc 1330 (Micromeritics, Aachen, Germany).
Refractoriness under load was determined according to DIN EN ISO 1893 in a
NETZSCH hood...
TITLE AUTHORS & PUBLICATION CITATION
Predicting the density and tensile strength of
viscoelastic soy powder compacts Pai, Dhananjay A. / Okos, Martin R., Journal of
Food Engineering, 116 (1), p.184-194, May 2013
..based on volume after pouring and at the end of tapping respectively. 5. True
density: Nitrogen Pycnometer (Accupyc 1330, Micromeritics, GA) ( n = 20 for Soy
Flour, n = 10 for Soy Protein Concentrate) ( Fitzpatrick et al. 2004 ). 2.2...
Preparation and characterization of low-
crystallized hydroxyapatite nanoporous
plates and granules
Uehira, Mayo / Okada, Masahiro / Takeda, Shoji /
Matsumoto, Naoyuki, Applied Surface Science, In
Press, Corrected Proof,Sep 2013
..mercury intrusion porosimetry (AutoPore IV 9520; Micromeritics Instrument Corp.,
Norcross, GA), after the...samples were determined using helium pycnometry
(AccuPyc 1330; Micromeritics Instrument Corp., Norcross, GA), after the...
Preparation and characterization of low-
crystallized hydroxyapatite nanoporous
plates and granules
Uehira, Mayo / Okada, Masahiro / Takeda, Shoji /
Matsumoto, Naoyuki, Applied Surface Science, In
Press, Corrected Proof,Sep 2013
..determined using mercury intrusion porosimetry (AutoPore IV 9520; Micromeritics
Instrument Corp., Norcross, GA), after the...determined using helium pycnometry
(AccuPyc 1330; Micromeritics Instrument Corp., Norcross, GA), after the...
Preparation and characterization of olive pits
powder as a filler to PLA-matrix Bio-
composites
Koutsomitopoulou, A.F. / Bénézet, J.C. / Bergeret,
A. / Papanicolaou, G.C., Powder Technology, In
Press, Accepted Manuscript,Nov 2013
..absolute density is determined by measuring the helium pressure change in a
calibrated volume (He Pycnometer, AccuPyc 1330 Micromeritics). The bulk density
for porous materials is defined as the density measured by considering the overall
volume...
Preparation and characterization of TiO 2
doped and MgO stabilized Na–β″-Al 2 O 3
electrolyte via a citrate sol–gel method
Shan, Shi-Jie / Yang, Li-Ping / Liu, Xiao-Min / Wei,
Xiao-Ling / Yang, Hui / Shen, Xiao-Dong, Journal
of Alloys and Compounds, 563, p.176-179, Jun
2013
..respectively. The density of the sintered samples was measured using an absolute
type analysis technique with a micromeritics Accupyc II1340 Pycnometer under 20
psi of Nitrogen. The relative density was calculated as the following equation: (3...
Preparation of high refractive index La 2 O 3 -
TiO 2 glass by aerodynamic levitation
technique and effects of Bi 2 O 3 substitution
on its thermal and optical properties
Xiang, Heng / Guan, Lu / Peng, Zhijian / Li,
Jianqiang, Ceramics International, In Press,
Accepted Manuscript,Oct 2013
..x-ray fluorescence spectrometer (PANalytical, Axios mAX ). The sample density was
measured by a gas pycnometer (Micromeritics Accupyc II 1340). The glass transition
temperature T g and crystallization onset temperature T x of the prepared glasses...
Preparation of the carbon sphere coated with
iron oxide and its application for electronic
paper
Lee, Kang Uk / Park, Kyung Ju / Kim, Myeong Ho /
Kwon, Oh Joong / Kim, Jae Jeong, Dyes and
Pigments, In Press, Accepted Manuscript,Oct
2013
..clip. 2.7 Characterization of the pigment The density of particles was measured
using gas pycnometry (AccuPyc Ⅱ1340, MICROMERITICS). The surface charge of
pigments was investigated by adopting a zeta potential analyzer (ELS-Z2plus...
Preparation, characterisation and dissolution
of a CeO 2 analogue for UO 2 nuclear fuel
Stennett, Martin C. / Corkhill, Claire L. / Marshall,
Luke A. / Hyatt, Neil C., Journal of Nuclear
Materials, 432 (1-3), p.182-188, Jan 2013
..characterisation Powder densities were measured using a Micromeritics AccuPyc II
1340 pycnometer. The pycnometer was purged 50...Surface area analysis by BET
was conducted using a Micromeritics Gemini 2360 instrument. The powder was
flushed...
Preparation, characterisation and dissolution
of a CeO 2 analogue for UO 2 nuclear fuel
Stennett, Martin C. / Corkhill, Claire L. / Marshall,
Luke A. / Hyatt, Neil C., Journal of Nuclear
Materials, 432 (1-3), p.182-188, Jan 2013
..characterisation Powder densities were measured using a Micromeritics AccuPyc II
1340 pycnometer. The pycnometer was purged...Surface area analysis by BET was
conducted using a Micromeritics Gemini 2360 instrument. The powder was flushed
with nitrogen...
Production of nepheline/quartz ceramics
from geopolymer mortars
Kuenzel, C. / Grover, L.M. / Vandeperre, L. /
Boccaccini, A.R. / Cheeseman, C.R., Journal of the
European Ceramic Society, 33 (2), p.251-258, Feb
2013
..Archimedes’ principle, 31 with the theoretical density determined on milled
samples using pycnometry (AccuPyc II 1340 He pycnometer, Micromeritics, GA,
USA). 2.4 Physical property characterisation Vickers hardness was determined on
polished...
TITLE AUTHORS & PUBLICATION CITATION
Production of polyphenol extracts from grape
bagasse using supercritical fluids: Yield,
extract composition and economic evaluation
Farías-Campomanes, Angela M. / Rostagno,
Mauricio A. / Meireles, M. Angela A., The Journal
of Supercritical Fluids, 77, p.70-78, May 2013
..changes were observed. The true density ( ρ t ) of the particles was determined by
picnometry with helium gas (Micromeritics, model AccuPyc II 1340 V1.02, Norcross,
USA). The bed apparent density ( ρ a ) was calculated by dividing the feed...
Properties of graphite composites based on
natural and synthetic graphite powders and a
phenolic novolac binder
Magampa, P.P. / Manyala, N. / Focke, W.W.,
Journal of Nuclear Materials, 436 (1-3), p.76-83,
May 2013
..Geopyc 1360 pycnometer. The helium density was measured with Accupyc II 1340
V1.03 Helium pycnometer. The volume of the...calculating helium density. Both
pycnometers were purchased from Micromeritics Instruments Corporation, USA.
The open accessible porosity...
Pyrolysis of blends of coal and tyre wastes in
a fixed bed reactor and a rotary oven Acevedo, B. / Barriocanal, C. / Alvarez, R., Fuel,
113, p.817-825, Nov 2013
..means of helium pycnometry in a Micromeritics Accupyc 1330 Pycnometer. Their
apparent...with mercury at 0.1 MPa in a Micromeritics Autopore IV 9500 mercury
porosimeter...N 2 adsorption at 77 K on a Micromeritics ASAP 2420 apparatus. The
software...
Pyrolysis of blends of coal and tyre wastes in
a fixed bed reactor and a rotary oven Acevedo, B. / Barriocanal, C. / Alvarez, R., Fuel,
113, p.817-825, Nov 2013
..of helium pycnometry in a Micromeritics Accupyc 1330 Pycnometer.
Their...mercury at 0.1 MPa in a Micromeritics Autopore IV 9500 mercury
porosimeter...2 adsorption at 77 K on a Micromeritics ASAP 2420 apparatus. The
software package...
Pyrolysis of blends of coal and tyre wastes in
a fixed bed reactor and a rotary oven Acevedo, B. / Barriocanal, C. / Alvarez, R., Fuel,
113, p.817-825, Nov 2013
..of helium pycnometry in a Micromeritics Accupyc 1330 Pycnometer.
Their...mercury at 0.1 MPa in a Micromeritics Autopore IV 9500 mercury
porosimeter. From...2 adsorption at 77 K on a Micromeritics ASAP 2420 apparatus.
The...
Rapid synthesis of La 0.85 Na 0.15 MnO 3 by
spark plasma sintering: Magnetic behavior
and magnetocaloric properties
Regaieg, Y. / Sicard, L. / Monnier, J. / Delaizir, G. /
Koubaa, M. / Godart, C. / Ammar-Merah, S. /
Cheikhrouhou, A., Materials Chemistry and
Physics, 139 (2-3), p.629-633, May 2013
..Supra40 ZEISS FEG-SEM microscope operating at 10 kV. The density of the as-
produced pellets was measured with a Micromeritics AccuPyc 1330 helium
pycnometer. Quantitative analysis of chemical elements was performed by
inductively coupled plasma...
Rheo-SAXS investigation of organoclay water
in oil emulsions
Akkal, R. / Cohaut, N. / Khodja, M. / Ahmed-Zaid,
T. / Bergaya, F., Colloids and Surfaces A:
Physicochemical and Engineering Aspects, 436,
p.751-762, Sep 2013
..VG69 ® , and Geltone ® ) are used in this work. Their density ( ρ ) is measured up by
Helium pycnometry (Accupyc 1330, Micromeritics). Bentone 38 (Elementis) is an
organically modified hectorite ( ρ = 1.66 g/cm 3 ) obtained from a...
Sago starch as binder and pore-forming agent
for the fabrication of porcelain foam
Jamaludin, Abdul Rashid / Kasim, Shah Rizal /
Abdullah, Mohd Zukifly / Ahmad, Zainal Arifin,
Ceramics International, In Press, Corrected
Proof,Sep 2013
..the medium for relative comparison and ρ th is attained from the density test
measured with a gas pycnometer (Micromeritics AccuPyc 1330). m 1 is the dried
weight of the sample, whereas m 2 and m 3 are the weight of the sample measured
after...
Sintering and crystallization of plates
prepared from coarse glass ceramic frits
Piva, Jorge Henrique / Wanderlind, Augusto /
Just, Jeanini / Montedo, Oscar Rubem Klegues /
De Noni, Agenor, Junior, Ceramics International,
39 (8), p.9137-9144, Dec 2013
..densities of specimen powders, obtained by dry grinding in a tungsten carbide mill,
were measured by He picnometry (Micromeritics Accupyc 1340, Norcross, USA),
while crystalline phases were determined by X-ray diffractometry (Shimadzu XRD-
6000...
Soil property effects on wind erosion of
organic soils
Zobeck, Ted M. / Baddock, Matthew / Scott Van
Pelt, R. / Tatarko, John / Acosta-Martinez,
Veronica, Aeolian Research, 10, p.43-51, Sep 2013
..in each sample interval using the particle density measured for each site
determined with a Micromeritics AccuPyc 1330 helium pycnometer (Micromeritics
Instrument Corp., Norcross, GA, USA) from sieved bulk samples as described in the
next...
TITLE AUTHORS & PUBLICATION CITATION
Solid crystal suspensions containing
griseofulvin – Preparation and bioavailability
testing
Reitz, Elena / Vervaet, Chris / Neubert, Reinhard
H.H. / Thommes, Markus, European Journal of
Pharmaceutics and Biopharmaceutics, 83 (2),
p.193-202, Feb 2013
..true density ( ρ true ) of the extrudate was determined in a 3.5 ml sample holder
with a helium pycnometer (AccuPyc, Micromeritics, Moenchengladbach, Germany).
The apparent density ( ρ app ) was characterized by a mercury porosimeter...
Solid lipid particles in lipid films to control the
diffusive release of 2-heptanoneC Bilbao-Sáinz, BS Chiou, GM Glenn… - Pest
management …, 2013 - Wiley Online Library
... was monitored for the different particles using thermogravimetric analysis
(Model 2950; TA Instruments ... films and the composite SLP films was performed in
a TA Instruments DSC 2910. ... using a gas pycnometer (AccuPyc II 1340 Series
pycnometer; Micromeritics Instrument Co
Solution-based approaches for making high-
density sodalite waste forms to immobilize
spent electrochemical salts
Lepry, William C. / Riley, Brian J. / Crum, Jarrod V.
/ Rodriguez, Carmen P. / Pierce, David A., Journal
of Nuclear Materials, 442 (1-3), p.350-359, Nov
2013
..mp ), and the average pore size. Helium pycnometry was used to measure
specimen density ( ρ s ) with an AccuPyc II 1340 (Micromeritics Instrument
Corporation, Norcross, GA). 2.7 Product consistency test (PCT) Specimens of
SM1–5...
Spheronisation mechanism of MCC II-based
pellets
Krueger, Cornelia / Thommes, Markus /
Kleinebudde, Peter, Powder Technology, 238,
p.176-187, Apr 2013
..acceptable. 2.2.6 Porosity The helium density (ρ He ) of the pellets was determined
by a helium pycnometer (AccuPyc, Micromeritics, Moenchengladbach, Germany).
For each tested pellet batch three samples were analyzed. The apparent density...
Stabilization of fluorine-containing industrial
waste by production of sintered glass-
ceramics
Ponsot, Inès / Falcone, Roberto / Bernardo,
Enrico, Ceramics International, 39 (6), p.6907-
6915, Aug 2013
..materials was estimated by means of the Archimedes principle, whereas the true
density was assessed by He pycnometry (Micromeritics AccuPyc 1330, Norcross,
GA). The main crystalline phases of all heat-treated samples and untreated ground
mixtures...
Structural changes to resorbable calcium
phosphate bioceramic aged in vitro
Mehrban, Nazia / Bowen, James / Vorndran, Elke
/ Gbureck, Uwe / Grover, Liam M., Colloids and
Surfaces B: Biointerfaces, 111, p.469-478, Nov
2013
..densities were determined using a helium pycnometer (AccuPyc II 1340,
Micromeritics, UK) employing 100 measurements per sample with...analysed using
an AutoPore IV mercury porosimeter (Micromeritics, UK) at pressures in the range 3
kPa–207...
Structural changes to resorbable calcium
phosphate bioceramic aged in vitro
Mehrban, Nazia / Bowen, James / Vorndran, Elke
/ Gbureck, Uwe / Grover, Liam M., Colloids and
Surfaces B: Biointerfaces, 111, p.469-478, Nov
2013
..using a helium pycnometer (AccuPyc II 1340, Micromeritics, UK) employing 100
measurements per sample...was sealed and the sample analysed using an AutoPore
IV mercury porosimeter (Micromeritics, UK) at pressures in the range 3 kPa...
Structure and oxidation resistance of micro-
cellular Si–SiC foams derived from natural
resins
Amaral-Labat, G. / Zollfrank, C. / Ortona, A. /
Pusterla, S. / Pizzi, A. / Fierro, V. / Celzard, A.,
Ceramics International, 39 (2), p.1841-1851, Mar
2013
..ρ s was measured by helium pycnometry (Accupyc II 1340, Micromeritics, USA).
For that purpose, sample pieces were crushed in a mortar...size distribution was
estimated by mercury porosimetry (AutoPore IV 9500, Micrometrics, USA). The
experiments were performed...
Structure and oxidation resistance of micro-
cellular Si–SiC foams derived from natural
resins
Amaral-Labat, G. / Zollfrank, C. / Ortona, A. /
Pusterla, S. / Pizzi, A. / Fierro, V. / Celzard, A.,
Ceramics International, 39 (2), p.1841-1851, Mar
2013
..known dimensions (3×3×1.5 cm 3 ). The skeletal density ρ s was measured by
helium pycnometry (Accupyc II 1340, Micromeritics, USA). For that purpose, sample
pieces were crushed in a mortar and dried at 120 °C in vacuum overnight...
Studies on the lithium ion diffusion
coefficients of electrospun Nb 2 O 5
nanostructures using galvanostatic
intermittent titration and electrochemical
impedance spectroscopy
Reddy, M.V. / Jose, R. / Le Viet, A. / Ozoemena,
Kenneth I. / Chowdari, B.V.R. / Ramakrishna, S.,
Electrochimica Acta, In Press, Corrected
Proof,Oct 2013
..TOPAS software. Density measurement was performed using pycnometer
(AccuPyc 1330, Micromeritics) and BET surface area was evaluated by a surface area
analyzer (Micromeritics Tristar 3000). Electrodes for the Li-diffusion coefficient
studies...
TITLE AUTHORS & PUBLICATION CITATION
Studies on the lithium ion diffusion
coefficients of electrospun Nb 2 O 5
nanostructures using galvanostatic
intermittent titration and electrochemical
impedance spectroscopy
Reddy, M.V. / Jose, R. / Le Viet, A. / Ozoemena,
Kenneth I. / Chowdari, B.V.R. / Ramakrishna, S.,
Electrochimica Acta, In Press, Corrected
Proof,Oct 2013
..Density measurement was performed using pycnometer (AccuPyc 1330,
Micromeritics) and BET surface area was evaluated by a surface area analyzer
(Micromeritics Tristar 3000). Electrodes for the Li-diffusion coefficient studies were
prepared...
Supercritical carbonation of calcareous
composites: Influence of curing
Farahi, Elham / Purnell, Phil / Short, Neil R.,
Cement and Concrete Composites, 43, p.48-53,
Oct 2013
..measured by micrometer and weighed, providing the bulk density. They were then
tested in a helium pycnometer (AccuPyc 1330, Micromeritics) over 10 purge cycles
to provide the true densities, from which the porosity was calculated. Samples
were...
Supercritical carbonation of calcareous
composites: Influence of mix design
Farahi, Elham / Purnell, Phil / Short, Neil R.,
Cement and Concrete Composites, 43, p.12-19,
Oct 2013
..measured using a micrometer and the bulk density calculated. They were then
tested in a helium pycnometer (AccuPyc 1330, Micromeritics) over 10 purge cycles
to provide the true densities, from which the porosity was calculated. For each
case...
Superparamagnetic iron oxide nanoparticles
(SPIONs)-loaded Trojan microparticles for
targeted aerosol delivery to the lung
Tewes, Frederic / Ehrhardt, Carsten / Healy, Anne
Marie, European Journal of Pharmaceutics and
Biopharmaceutics, In Press, Corrected Proof,Sep
2013
..properties ( n = 2). 2.2.5 Particle true density The true density of the materials was
measured using an Accupyc 1330 Pycnometer (Micromeritics®) with helium
(99.995% purity) to determine the volume of accurately weighed samples. Samples...
Syndiotactic polystyrene aerogels containing
multi-walled carbon nanotubes Wang, Xiao / Jana, Sadhan C., Polymer, 54 (2),
p.750-759, Jan 2013
..specimens. The skeletal density ρ s was measured using an Accupyc 1340 Helium
Pycnometer (Micrometrics Instrument Corp...nitrogen adsorption–desorption
isotherms analyzed using Micromeritics Tristar II 3020 Analyzer. The aerogel
specimens were sectioned...
Synthesis and Characterization of Urea
Nitrate and NitroureaJC Oxley, JL Smith, S Vadlamannati… -
Propellants, …, 2013 - Wiley Online Library
... 2.2 Densities, Solubility and Melting Points of UN and NU. Ten density
determinations for UN and NU products were obtained using a Micromeritics
AccuPyc 1340 gas pycnometer. ... Ammonium nitrate exhibited additional small
peak at ca. 2900 cm −1 .
Synthetic Methods for Preparing Ionic Liquids
Containing Hypophosphite and
Carbon-Extended Dicyanamide Anions
JP Maciejewski, H Gao… - Chemistry-A European
…, 2013 - Wiley Online Library
... Chem. Eur. J., 19: 2947–2950. doi: 10.1002/chem.201203740. Author
Information. 1 ... Densities were measured by using a Micromeritics Accupyc 1330
gas pycnometer. Viscosities were measured with a Grabner MINIVIS II Portable
Micro viscometer.
Tannin-based xerogels with distinctive
porous structures
Amaral-Labat, G. / Grishechko, L.I. / Fierro, V. /
Kuznetsov, B.N. / Pizzi, A. / Celzard, A., Biomass
and Bioenergy, 56, p.437-445, Sep 2013
..pycnometry (Accupyc II 1340, Micromeritics, USA). For that purpose,
samples...automatic adsorption apparatus (Micromeritics, USA). For that
purpose...porosimetry experiments (AutoPore IV 9500, Micromeritics) were carried
out. This...
Tannin-based xerogels with distinctive
porous structures
Amaral-Labat, G. / Grishechko, L.I. / Fierro, V. /
Kuznetsov, B.N. / Pizzi, A. / Celzard, A., Biomass
and Bioenergy, 56, p.437-445, Sep 2013
..Envelope Density Analyser (Micromeritics, USA). The skeletal density...measured
by helium pycnometry (Accupyc II 1340, Micromeritics, USA). For that purpose,
samples...automatic adsorption apparatus (Micromeritics, USA). For that purpose...
TITLE AUTHORS & PUBLICATION CITATION
The degree of compression of spherical
granular solids controls the evolution of
microstructure and bond probability during
compaction
Nordström, Josefina / Persson, Ann-Sofie /
Lazorova, Lucia / Frenning, Göran / Alderborn,
Göran, International Journal of Pharmaceutics,
442 (1-2), p.3-12, Feb 2013
..determined by helium displacement using a pycnometer (AccuPyc 1330,
Micromeritics, USA). Two powder samples were taken and each...measurements in
a porosimeter (Autopore III 9420, Micromeritics, USA). An amount of pellets in the
range 900...
The degree of compression of spherical
granular solids controls the evolution of
microstructure and bond probability during
compaction
Nordström, Josefina / Persson, Ann-Sofie /
Lazorova, Lucia / Frenning, Göran / Alderborn,
Göran, International Journal of Pharmaceutics,
442 (1-2), p.3-12, Feb 2013
..displacement using a pycnometer (AccuPyc 1330, Micromeritics, USA). Two
powder samples were taken and each...mercury intrusion measurements in a
porosimeter (Autopore III 9420, Micromeritics, USA). An amount of pellets in the
range...
The effect of concentration on the structure
and crystallinity of a cementitious waste
form for caustic wastes
Chung, Chul-Woo / Turo, Laura A. / Ryan, Joseph
V. / Johnson, Bradley R. / McCloy, John S., Journal
of Nuclear Materials, 437 (1-3), p.332-340, Jun
2013
..used for helium pycnometry utilizing an AccuPyc II 1340 Gas Pycnometer from
Micrometrics...intrusion porosimetry (MIP) was performed by Micromeritics on the
Cast Stone specimens using a Micromeritics AutoPore 9520 instrument capable of
pressures...
The improvement of electron transport rate
of TiO 2 dye-sensitized solar cells using mixed
nanostructures with different phase
compositions
Bakhshayesh, A.M. / Mohammadi, M.R.,
Ceramics International, 39 (7), p.7343-7353, Sep
2013
..density of TiO 2 nanostructures was measured by a Micromeritics AccuPyc 1330
pycnometer analyzer. They were also characterized...equations, respectively at
77.35 K using a Micromeritics Tristar 3000 analyzer. External surface area of...
The improvement of electron transport rate
of TiO 2 dye-sensitized solar cells using mixed
nanostructures with different phase
compositions
Bakhshayesh, A.M. / Mohammadi, M.R.,
Ceramics International, 39 (7), p.7343-7353, Sep
2013
..density of TiO 2 nanostructures was measured by a Micromeritics AccuPyc 1330
pycnometer analyzer. They were also characterized...equations, respectively at
77.35 K using a Micromeritics Tristar 3000 analyzer. External surface area of the
samples...
The influence of rolling friction on the shear
behaviour of non-cohesive pharmaceutical
granules – An experimental and numerical
investigation
Persson, Ann-Sofie / Frenning, Göran, European
Journal of Pharmaceutical Sciences, 49 (2), p.241-
250, May 2013
..cm 3 ) was measured with helium pycnometry (AccuPyc 1330, Micromeritics, USA).
The granules were stored at...from mercury pycnometry (Autopore III 9420,
Micromeritics, USA) as described by Wikberg and Alderborn...
The influence of rolling friction on the shear
behaviour of non-cohesive pharmaceutical
granules – An experimental and numerical
investigation
Persson, Ann-Sofie / Frenning, Göran, European
Journal of Pharmaceutical Sciences, 49 (2), p.241-
250, May 2013
..measured with helium pycnometry (AccuPyc 1330, Micromeritics, USA). The
granules were stored at...2) was assessed from mercury pycnometry (Autopore III
9420, Micromeritics, USA) as described by Wikberg and Alderborn...
The influence of SrSO 4 on the tribological
properties of NiCr–Al 2 O 3 cermet at
elevated temperatures
Liu, Feng / Yi, Gewen / Wang, Wenzhen / Shan,
Yu / Jia, Junhong, Ceramics International, In
Press, Corrected Proof,Oct 2013
..following analyses and tests. The density of the sintered composites was
determined by using a helium pycnometry (AccuPyc 1330, Micromeritics Int. Corp.,
USA) after calculating the volume. The hardness measurements were conducted
using MH–5...
TITLE AUTHORS & PUBLICATION CITATION
The kinetics of devitrification of amorphous
alloys: The time–temperature–crystallinity
diagram describing the spark plasma
sintering of Fe-based metallic glasses
Graeve, O.A. / Saterlie, M.S. / Kanakala, R. / de la
Torre, S. Diaz / Farmer, J.C., Scripta Materialia, 69
(2), p.143-148, Jul 2013
..surfaces of the sintered specimens. The density of the powders and sintered
specimens was determined using a Micromeritics AccuPyc II 1340 ultrahigh-purity
He pycnometer. 3 Results and discussion The morphology of the sintered specimens
is...
The morphology of limestone-based pellets
prepared with kaolin-based binders
Ridha, Firas N. / Manovic, Vasilije / Anthony,
Edward J. / Macchi, Arturo, Materials Chemistry
and Physics, 138 (1), p.78-85, Feb 2013
..pore size distribution were determined on a Micromeritics analyzer (Micromeritics
Tristar II-3020) by N 2 adsorption at...was determined using helium pycnometry
(Micromeritics AccuPyc II-1340 Pycnometer). Scanning electron...
The use of egg shells to produce Cathode Ray
Tube (CRT) glass foams
Fernandes, Hugo R. / Andreola, Fernanda /
Barbieri, Luisa / Lancellotti, Isabella / Pascual,
Maria J. / Ferreira, José M.F., Ceramics
International, 39 (8), p.9071-9078, Dec 2013
..following characterization techniques were employed: (1) the absolute density was
measured using a He pycnometer (Micromeritics Accupyc 1330, USA); (2) the
apparent density of materials was determined by measuring the weight and the
dimensions...
Thermal stability and water effect on ion-
exchange resins in ethyl octyl ether
production at high temperature
Guilera, Jordi / Ramírez, Eliana / Fité, Carles /
Iborra, Montserrat / Tejero, Javier, Applied
Catalysis A: General, 467, p.301-309, Oct 2013
..to approach the industrial reactor. Skeletal density ( ρ s ) was measured by helium
displacement in an Accupyc 1330 apparatus (Micromeritics). BET surface area, S BET
, was estimated from N 2 adsorption-desorption isotherm at 77 K (krypton...
Thermoelectric Ca 0.9 Yb 0.1 MnO 3− δ grain
growth controlled by spark plasma sintering
Quetel-Weben, Simon / Retoux, Richard /
Noudem, Jacques G., Journal of the European
Ceramic Society, 33 (10), p.1755-1762, Sep 2013
..Archimedes method with a Kern ABT 220–4 M analytical balance and checked by
the helium pycnometry process with a Micromeritics AccuPyc 1330 pycnometer. X-
ray powder diffraction patterns were recorded on an X’PERT (Almelo, Netherlands...
Three-dimensional printing of SiSiC lattice
truss structures
Fu, Z. / Schlier, L. / Travitzky, N. / Greil, P.,
Materials Science and Engineering: A, 560, p.851-
856, Jan 2013
..composed of approximately 42 wt% of carbon. The density of the preforms was
determined via helium pycnometry (Accupyc 1330, Micromeretics, Norcross, USA)
and open porosity of the preforms was calculated from the measured geometrical
and pycnometrical densities...
Transmission electron microscopy study of
the reaction mechanisms involved in the
carbothermal reduction of anatase
David, J. / Trolliard, G. / Maître, A., Acta
Materialia, 61 (14), p.5414-5428, Aug 2013
..measurements were performed with a helium picnometer (AccuPyc II 1340,
Micromeritics, Verneuil, France). The specific areas of the...Emmett–Teller (BET)
method (ASAP 2000, Micromeritics, Verneuil, France), and the size of particles...
Twin screw wet granulation: Influence of
formulation parameters on granule
properties and growth behavior
El Hagrasy, A.S. / Hennenkamp, J.R. / Burke, M.D.
/ Cartwright, J.J. / Litster, J.D., Powder
Technology, 238, p.108-115, Apr 2013
..granules was measured by a helium pycnometer (AccuPyc II 1340, Micromeritics,
Norcross, GA), using granules in the size...same size fraction was measured using
Geopyc (Micromeritics, Norcross, GA). In this method, a small...
Ultrahigh-pressure consolidation and
deformation of tantalum carbide at ambient
and high temperatures
Lahiri, Debrupa / Singh, Virendra / Rodrigues,
Giovani Ritta / Costa, Tania Maria Haas / Gallas,
Marcia R. / Bakshi, Srinivasa Rao / Seal, Sudipta /
Agarwal, Arvind, Acta Materialia, 61 (11), p.4001-
4009, Jun 2013
..TaC-RT and TaC-HT, respectively. The density of the pellets was measured using
helium gas pycnometry (Accupyc 1340, Micromeretics Instrument Corporation,
Norcross, GA, USA) and expressed in terms of relative density considering the true
density of...
TITLE AUTHORS & PUBLICATION CITATION
Understanding the key parameters for the
rational design of layered oxide materials by
composite sol–gel procedures
Ould-Chikh, S. / Brodusch, N. / Crozet, N. /
Hemati, M. / Rouleau, L., Powder Technology,
237, p.255-265, Mar 2013
..mercury porosimetry (Autopore 4-Micromeretics). Incertitude on porous volume
is...physisorption isotherms (ASAP 2420-Micromeretics). Skeletal densities of
powders are...measured by helium pycnometry (Accupyc-Micromeretics). Powder
bulk density and grain density...
Uniaxial tension and compression
characterization of hybrid CNS–glass
fiber–epoxy composites
Markkula, Sam / Malecki, H.C. / Zupan, Marc,
Composite Structures, 95, p.337-345, Jan 2013
..density and weight percent of fiber in the composite. The density of each
composite panel was measured with a Micromeritics AccuPyc gas pycnometer for
the purpose of comparing specific properties. The weight percent of fiber in each
glass...
Use of chemically and physically mixed iron
and nickel oxides as oxygen carriers for gas
combustion in a CLC process
Pans, Miguel A. / Gayán, Pilar / Abad, Alberto /
García-Labiano, Francisco / de Diego, Luis F. /
Adánez, Juan, Fuel Processing Technology, 115,
p.152-163, Nov 2013
..density of the particles was measured with a Micromeritics AccuPyc II 1340 helium
pycnometer. The surface area...adsorption/desorption of nitrogen at 77 K in a
Micromeritics ASAP-2020 (Micromeritics Instruments Inc.), whereas the pore
volume...
Use of different supports for oil
encapsulation in powder by spray drying
Turchiuli, C. / Jimenez Munguia, M.T. /
Hernandez Sanchez, M. / Cortes Ferre, H. /
Dumoulin, E., Powder Technology, In Press,
Corrected Proof,Aug 2013
..0.2 mm) (Density tester, Varian, Fr). The solid true density was measured using an
air pycnometer (AccuPyc, Micromeritics, Fr). The determination of the total oil
content of the powder required first the reconstitution of the liquid...
Use of silica nanopowder to accelerate CO 2
sorption by Ca(OH) 2 Quintanilla, M.A.S. / Valverde, J.M., Particuology,
11 (4), p.448-453, Aug 2013
..Particle density, determined by an AccuPyc 1330 Pycnometer (Quantachrome
Instruments...the BET surface area, determined by a Micromeritics Tristar II 3020
physisorption analyzer...manual gas pycnometer (Quantachrome AccuPyc 1330
Pycnometer) consisting of two vessels...
Use of silica nanopowder to accelerate CO 2
sorption by Ca(OH) 2 Quintanilla, M.A.S. / Valverde, J.M., Particuology,
11 (4), p.448-453, Aug 2013
..AccuPyc 1330 Pycnometer (Quantachrome Instruments), is 2.36 g/cm 3 and the
BET surface area, determined by a Micromeritics Tristar II 3020 physisorption
analyzer, is 16.32 m 2 /g. Scanning electron microscope (SEM) pictures of this
powder...
Wound dressings loaded with an anti-
inflammatory jucá ( Libidibia ferrea ) extract
using supercritical carbon dioxide technology
Dias, A.M.A. / Rey-Rico, A. / Oliveira, R.A. /
Marceneiro, S. / Alvarez-Lorenzo, C. / Concheiro,
A. / Júnior, R.N.C. / (...) / de Sousa, H.C., The
Journal of Supercritical Fluids, 74, p.34-45, Feb
2013
..dressing material), and ρ solid (g/cm 3 ) is the true density measured by helium
pycnometry (Accupyc 1330 Micromeritics, Micromeritics Instrument Corporation,
USA). 2.6 Fluid handling properties 2.6.1 Oxygen permeability Oxygen...