This article was downloaded by: [RMIT University]On: 21 March 2013, At: 04:56Publisher: Taylor & FrancisInforma Ltd Registered in England and Wales Registered Number: 1072954 Registeredoffice: Mortimer House, 37-41 Mortimer Street, London W1T 3JH, UK
International Journal of ElectronicsPublication details, including instructions for authors andsubscription information:http://www.tandfonline.com/loi/tetn20
A novel mixed-mode OTA-C universalfilterMuhammad Taher Abuelma'atti & Abdulwahab Bentrciaa King Fahd University of Petroleum and Minerals, Box 203,Dhahran 31261, Saudi Arabiab King Fahd University of Petroleum and Minerals, Box 203,Dhahran 31261, Saudi Arabia E-mail:Version of record first published: 19 Aug 2006.
To cite this article: Muhammad Taher Abuelma'atti & Abdulwahab Bentrcia (2005): A novel mixed-mode OTA-C universal filter, International Journal of Electronics, 92:7, 375-383
To link to this article: http://dx.doi.org/10.1080/08827510412331295009
PLEASE SCROLL DOWN FOR ARTICLE
Full terms and conditions of use: http://www.tandfonline.com/page/terms-and-conditions
This article may be used for research, teaching, and private study purposes. Anysubstantial or systematic reproduction, redistribution, reselling, loan, sub-licensing,systematic supply, or distribution in any form to anyone is expressly forbidden.
The publisher does not give any warranty express or implied or make any representationthat the contents will be complete or accurate or up to date. The accuracy of anyinstructions, formulae, and drug doses should be independently verified with primarysources. The publisher shall not be liable for any loss, actions, claims, proceedings,demand, or costs or damages whatsoever or howsoever caused arising directly orindirectly in connection with or arising out of the use of this material.
International Journal of Electronics,
Vol. 92, No. 7, July 2005, 375–383
A novel mixed-mode OTA-C universal filter
MUHAMMAD TAHER ABUELMA’ATTI* and ABDULWAHAB BENTRCIA
King Fahd University of Petroleum and Minerals, Box 203, Dhahran 31261, Saudi Arabia
(Received 3 March 2004; in final form 1 June 2004)
A novel mixed-mode biquad circuit is presented. The circuit uses six single-output- and one dual-output-operational transconductance amplifiers, twogrounded capacitors; and can realize lowpass, highpass, bandpass, notch,lowpass-notch, highpass-notch and allpass responses from the same topology.The circuit can be driven by voltage or current and its output can be voltage orcurrent. The parameters !o and !o/Qo enjoy independent electronic tunability.Simulation results are included.
Keywords: Active filters - operational transconductance amplifier
1. Introduction
Due to their structural simplicity, electronic tunability, high frequency capability,and monolithic integrability, active filters using operational transconductanceamplifiers (OTAs) and grounded capacitors, widely known as OTA-C filters, areattracting the attention of many researchers; see for example (Ananda Mohan1990, Sun and Fidler 1993a, b, Ramirez-Angulo and Sanchez-Sinencio 1994, Sunand Fidler 1995, Al-Hashimi 1996, Sun and Fidler 1996a, b, c, d, Tsukutani et al.1996, Moniri and Al-Hashimi 1997, Sun and Fidler 1997a, b, Zhang et al. 1997,Al-Hashimi et al. 1998, Sun et al. 1998, Deliyannis et al. 1999, Lee et al. 1999, Chiangand Schaumann 2000, Glinianowicz et al. 2000, Hsu and Feng 2000a, b, 2001a, b)and the references cited therein. The use of multiple-output OTAs, paves the way torealize current-mode filter functions (see, for example, Ramirez-Angulo andSanchez-Sinencio 1994, Al-Hashimi 1996, Sun and Fidler 1996a, b, c, Tsukutaniet al. 1996, Moniri and Al-Hashimi 1997, Sun and Fidler 1997, Al-Hashimi et al.1998, Lee et al. 1999, Hsu and Feng 2000, 2001), whereas the use of single-outputOTAs yields voltage-mode filter functions (see, for example, Ananda Mohan 1990,Sun and Fidler 1993a, b, 1995, 1996, 1997, Zhang et al. 1997, Sun et al. 1998,Deliyannis et al. 1999, Glinianowicz et al. 2000, Chiang and Schaumann 2000,Hsu and Feng 2000, 2001).
In analog signal processing applications it may be desirable to have activefilters with input currents and/or voltages and output currents and/or voltages,that is mixed-mode filters (Ramirez-Angulo et al. 1992, Soliman 1996, Toker et al.2001). Careful inspection of the available literature shows that the mixed-mode
*Corresponding author. Email: [email protected]
International Journal of Electronics
ISSN 0020–7217 print/ISSN 1362–3060 online # 2005 Taylor & Francis Group Ltd
http://www.tandf.co.uk/journals
DOI: 10.1080/08827510412331295009
Dow
nloa
ded
by [
RM
IT U
nive
rsity
] at
04:
56 2
1 M
arch
201
3
realizations with input current and output voltage (Ramirez-Angulo et al. 1992,Soliman 1996), and with input voltage and output current (Toker et al. 2001) areavailable, no circuit realization is available for realizing a generalized mixed-modeactive filter with input current or voltage and output current or voltage. It is themajor intention of this paper to present such a generalized mixed-mode circuit usingthe OTAs.
2. Proposed circuit
The proposed circuit is shown in figure 1. Routine analysis yields the transferfunctions given by
Vout ¼gm2
gm4gm7
N sð Þ
D sð Þð1Þ
and
Iout ¼gm2
gm4
N sð Þ
D sð Þð2Þ
where
N sð Þ ¼ s2 gm3Vin3 þ Iin3ð Þ � sgm3
gm5Vin2 � gm6Vin4 þ Iin2ð Þ
C1
þgm3gm5
C1C2
gm1Vin1 þ Iin1ð Þ ð3Þ
•
•
•
•
•
•
•
•
••
•
•
•
•+
+
+
+
+
+
+
−
−
−
−
−
−
−
−1mg 2mg
3mg
4mg
5mg 6mg
7mg
1C
2C
1inV
2inV
3inV
4inV
1inI
2inI
3inI
outIoutV
•
Figure 1. Proposed mixed-mode OTA-based filter.
376 M. T. Abuelma’atti and A. Bentrcia
Dow
nloa
ded
by [
RM
IT U
nive
rsity
] at
04:
56 2
1 M
arch
201
3
and
D sð Þ ¼ s2 þ sgm3gm6
gm4C1
þgm1gm3gm5
gm4C1C2
: ð4Þ
Inspection of equations (3) and (4) shows that various mixed-mode filter functions,with input voltage or current and output voltage or current, can be realized.For example:
(1) With Iin1 ¼ Iin2 ¼ Iin3 ¼ 0, the following voltage-mode responses, with inputvoltages and output voltage, and mixed-mode responses, with input voltagesand output current are obtained:(a) a non-inverted highpass-filter (HPF) with Vin1 ¼ Vin2 ¼ Vin4 ¼ 0.(b) a non-inverted lowpass-filter (LPF) with Vin2 ¼ Vin3 ¼ Vin4 ¼ 0.(c) an inverted bandpass-filter (BPF) with Vin1 ¼ Vin3 ¼ Vin4 ¼ 0.(d) a non-inverted BPF with Vin1 ¼ Vin2 ¼ Vin3 ¼ 0.(e) a non-inverted notch filter (NF) with Vin1 ¼ Vin3 and Vin2 ¼ Vin4 ¼ 0.(f) in case (e), a lowpass-notch and highpass-notch can be obtained by
adjusting the transconductances gm3 and gm4.(g) a non-inverted allpass-filter (APF) with gm3 ¼ gm4, gm5 ¼ gm6,
Vin1 ¼ Vin2 ¼ Vin3 and Vin4 ¼ 0.(2) With Vin1 ¼ Vin2 ¼ Vin3 ¼ Vin4 ¼ 0, the following current-mode responses,
with input currents and output current, and mixed-mode responses, withinput currents and output voltage, are obtained:(a) a non-inverted HPF with Iin1 ¼ Iin2 ¼ 0.(b) a non-inverting LPF with Iin2 ¼ Iin3 ¼ 0.(c) an inverting BPF with Iin1 ¼ Iin3 ¼ 0.(d) a NF with Iin2 ¼ 0 and Iin1 ¼ Iin3.(e) In case (d), a lowpass-notch and highpass-notch can be obtained
by adjusting the transconductances gm3 and gm4.(f) an APF with Iin1 ¼ Iin2 ¼ Iin3, and gm1 ¼ gm4 ¼ gm6.
Inspection of equation (4) shows that in all cases the parameters !2o and !o/Qo are
given by
!2o ¼
gm1gm3gm5
gm4C1C2
ð5Þ
!o
Qo
¼gm3gm6
gm4C1
ð6Þ
and
Qo ¼1
gm6
ffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiffiC1
C2
gm4
gm3
gm1gm5
sð7Þ
Thus, the parameter !2o can be controlled by adjusting the transconductances
gm1 and/or gm5 without disturbing the parameter !o/Qo, and the parameter !o/Qo
can be controlled by adjusting transconductance gm6 without disturbing the param-eter !2
o. Moreover, the parameter Qo can be controlled by adjusting the trans-conductance gm6 without disturbing the parameter !2
o. However, the parameter!2o cannot be controlled without disturbing the parameter Qo. In addition,
OTA-C Filter 377
Dow
nloa
ded
by [
RM
IT U
nive
rsity
] at
04:
56 2
1 M
arch
201
3
inspections of equations (1) and (2) shows that the gain associated with any transferfunction can be controlled, without disturbing the parameters !2
o and !o/Qo byadjusting gm2 and/or gm7 for output voltage, or by adjusting the transconductancegm2 for output current. Thus, the proposed circuit enjoys the attractive feature ofindependent electronic tunability of the transfer gain and the parameters !2
o and!o/Qo, and orthogonal tuning of the parameters !2
o and Qo.Using equations (5) and (6), it is easy to show that all the passive sensitivities
of the parameters !o and !o/Qo are lesser than or equal to unity. Thus the circuitparameters enjoy low passive sensitivities.
3. Simulation results
The proposed circuit was simulated using PSPICE circuit simulation program. TheOTAs were modeled using the model reported in (Wu 1994). The results obtainedfrom voltage-mode realization, with C1 ¼ C2 ¼ 1:0 nF, gm1 ¼ gm2 ¼ gm3 ¼ gm4 ¼
gm5 ¼ gm6 ¼ gm7 ¼ 1:0mA=V, are shown in figures 2–5. The results obtained fromcurrent-mode realizations, with C1 ¼ C2 ¼ 1:0 nF, gm2 ¼ gm3 ¼ gm4 ¼ gm5 ¼ gm6 ¼
gm7 ¼ 1:0mA=V, gm1 ¼ 0:1mA=V, are shown in figures 6–9. Figures 2–9 alsoshow calculations made using equation (1). It appears from figures 2–9 that thesimulated and calculated results are fairly in good agreement.
4. Conclusion
In this paper, a new mixed-mode biquad circuit has been presented. The circuit usessix single-output and one dual-output OTAs and can realize all the standard biquad
100
102
104
106
108
−60
−50
−40
−30
−20
−10
0
10
20
30
40
Frequency (rad/sec)
Mag
nitu
de (
db)
Figure 2. Calculated (––––) and simulated (**) voltage-mode bandpass filter.
378 M. T. Abuelma’atti and A. Bentrcia
Dow
nloa
ded
by [
RM
IT U
nive
rsity
] at
04:
56 2
1 M
arch
201
3
filter responses. The parameters of the filter responses enjoy independent electronictunability and low passive sensitivities. The circuit can also realize mixed-modefilter responses. Thus, a voltage input may result in either a current or a voltageoutput. In addition, a current input may result in either a current or a voltageoutput.
100
102
104
106
108
−200
−150
−100
−50
0
50
Frequency (rad/sec)
Mag
nitu
de (
db)
Figure 3. Calculated (––––) and simulated (**) voltage-mode highpass filter.
100
102
104
106
108
−40
−30
−20
−10
0
10
20
30
40
50
Frequency (rad/sec)
Mag
nitu
de (
db)
Figure 4. Calculated (––––) and simulated (**) voltage-mode lowpass filter.
OTA-C Filter 379
Dow
nloa
ded
by [
RM
IT U
nive
rsity
] at
04:
56 2
1 M
arch
201
3
In order to confirm the operability of the proposed circuit, the simulation resultsreported in this paper were obtained using capacitor values 1.0 nF. However, forintegrated circuit implementations, these capacitor values are rather large andcapacitors of the order of 10 pF are more appropriate. This may require the
100
102
104
106
108
−20
−10
0
10
20
30
40
Frequency (rad/sec)
Mag
nitu
de (
db)
Figure 5. Calculated (––––) and simulated (**) voltage-mode notch filter.
100
102
104
106
108
−90
−80
−70
−60
−50
−40
−30
−20
−10
0
Frequency (rad/sec)
Mag
nitu
de (
db)
Figure 6. Calculated (––––) and simulated (**) current-mode bandpass filter.
380 M. T. Abuelma’atti and A. Bentrcia
Dow
nloa
ded
by [
RM
IT U
nive
rsity
] at
04:
56 2
1 M
arch
201
3
reduction of the transconductance values for the proposed circuit to work withinthe bandwidth of the OTAs.
While the simulation results confirm the theory presented in this paper,the discrepancies between the calculated and simulated results are attributed
100
102
104
106
108
−200
−180
−160
−140
−120
−100
−80
−60
−40
−20
0
Frequency (rad/sec)
Mag
nitu
de (
db)
Figure 7. Calculated (––––) and simulated (**) current-mode highpass filter.
100
102
104
106
108
−100
−80
−60
−40
−20
0
20
Frequency (rad/sec)
Mag
nitu
de (
db)
Figure 8. Calculated (––––) and simulated (**) current-mode lowpass filter.
OTA-C Filter 381
Dow
nloa
ded
by [
RM
IT U
nive
rsity
] at
04:
56 2
1 M
arch
201
3
to the simplified model used in the analysis. More sophisticated models for the OTAsmust be used if operation at high frequencies is targeted.
References
B.M. Al-Hashimi, ‘‘Current mode filter structure based on dual output transconductanceamplifiers’’, Elec. Lett., 32, pp. 25–26, 1996.
B.M. Al-Hashimi, F. Dudek, M. Moniri and J. Living, ‘‘Integrated universal biquad based ontriple-output OTAs and using digitally programmable zeros’’, IEE Proc.-circ. Dev.Sys., 145, pp. 192–196, 1998.
P.V. Ananda Mohan, ‘‘Generation of OTA-C filter structures from active RC filterstructures’’, IEEE Trans. Circ. Sys., 37, pp. 656–660, 1990.
D.H. Chiang and R. Schaumann, ‘‘Performance comparison of high-order IFLF and cascadeanalogue integrated lowpass filters’’, IEE Proc.-circ. Dev. Sys., 147, pp. 19–27, 2000.
T. Deliyannis, Y. Sun and J.K. Fidler, Continuous-time Active Filter Design, CRC Press: BocaRaton, 1999.
J. Glinianowicz, J. Jakusz, S. Szczepanski and Y. Sun, ‘‘High frequency two-inputCMOS OTA for continuous-time filter applications’’, IEE Proc.-circ. Dev. Sys., 147,pp. 13–18, 2000.
C.C. Hsu and W.S. Feng, ‘‘Testable design of multiple-stage OTA-C filters’’, IEEE Trans.Instru. Meas., 49, pp. 929–934, 2000a.
C.C. Hsu and W.S. Feng, ‘‘Structural generation of current-mode filters using tunablemultiple-output OTAs and grounded capacitors’’, IEICE Trans. Fund., E83-A,pp. 1778–1785, 2000b.
C.C. Hsu and W.S. Feng, ‘‘Novel Gm-C realizations of nth-order filters’’, IEICE Trans. Fund.,E84-A, pp. 339–346, 2001a.
C.C. Hsu and W.S. Feng, ‘‘Structural design of current-mode biquad filters’’, Int. J. Elec.,88, pp. 41–51, 2001b.
100
102
104
106
108
−60
−50
−40
−30
−20
−10
0
10
20
Frequency (rad/sec)
Mag
nitu
de (
db)
Figure 9. Calculated (––––) and simulated (**) current-mode lowpass-notch filter.
382 M. T. Abuelma’atti and A. Bentrcia
Dow
nloa
ded
by [
RM
IT U
nive
rsity
] at
04:
56 2
1 M
arch
201
3
K.J. Lee, W.C. Wang and K.S. Huang, ‘‘A current-mode testable design of operationaltransconductance amplifier-capacitor filter’’, IEEE Trans. Circ. Sys.-II: Anal. Digi.Sig. Proc., 46, pp. 401–413, 1999.
M. Moniri and B.M. Al-Hashimi, ‘‘Systematic generation of current mode dual output OTAfilters using a bulding block approach’’, Int. J. Elec., 83, pp. 37–48, 1997.
J. Ramirez-Angulo, M. Robinson and E. Sanchez-Sinencio, ‘‘Current-mode continuous-timefilters: two design approaches’’, IEEE Trans. Circ. Sys.-II: Anal. Digi. Sig. Proc., 39,pp. 337–341, 1992.
J. Ramirez-Angulo and E. Sanchez-Sinencio, ‘‘High frequency compensated current-modeladder filters using multiple output OTAs’’, IEEE Trans. Circ. Sys.-II: Anal. Digi.Sig. Proc., 41, pp. 581–586, 1994.
A.M. Soliman, ‘‘Mixed-mode biquad circuits’’, Microelec. J., 27, pp. 591–594, 1996.Y. Sun and J.K. Fidler, ‘‘OTA-C realization of general high-order transfer functions’’,
Elec. Lett., 29, pp. 1057–1058, 1993a.Y. Sun and J.K. Fidler, ‘‘Novel OTA-C realizations of biquadratic transfer functions’’,
Int. J. Elec., 75, pp. 333–348, 1993b.Y. Sun and J.K. Fidler, ‘‘Resonator-based universal OTA-grounded capacitor filters’’,
Int. J. Circ. Th. Appl., 23, pp. 261–265, 1995.Y. Sun and J.K. Fidler, ‘‘Synthesis and performance analysis of a universal minimum
component integrator-based IFLF OTA-grounded capacitor filter’’, IEE Proc.-circDev. Sys., 143, pp. 107–114, 1996a.
Y. Sun and J.K. Fidler, ‘‘Current-mode OTA-C realisation of arbitrary filter characteristics’’,Elec. Lett., 32, pp. 1181–1182, 1996b.
Y. Sun and J.K. Fidler, ‘‘Design of current-mode multiple output OTA and capacitor filters’’,Int. J. Elec., 81, pp. 95–99, 1996c.
Y. Sun and J.K. Fidler, ‘‘Structure generation of current-mode two integrator loop dualoutput-OTA grounded capacitor filters’’, IEEE Trans. Circ. Sys.-II: Anal. Digi. Sig.Proc., 43, pp. 659–663, 1996d.
Y. Sun and J.K. Fidler, ‘‘Structure generation and design of multiple loop feedbackOTA-grounded capacitor filters’’, IEEE Trans. Circ. Sys.-I: Fund. Th. Appl., 44,pp. 1–11, 1997a.
Y. Sun and J.K. Fidler, ‘‘Current-mode multiple loop feedback filters using dual output OTAsand grounded capacitors’’, Int. J. Circ. Th. Appl., 25, pp. 69–80, 1997b.
Y. Sun, B. Jefferies and J. Teng, ‘‘Universal third-order OTA-C filters’’, Int. J. Elec, 85,pp. 597–609, 1998.
A. Toker, O. Cicekoglu, S. Ozcan and H. Kuntman, ‘‘High-output-impedance transadmit-tance type continuous-time multifunction filter with minimum active elements’’,Int. J. Elec., 88, pp. 1085–1091, 2001.
T. Tsukutani, M. Ishida, S. Tsuiki and Y. Fukui, ‘‘Versatile current-mode biquad filter usingmultiple current output OTAs’’, Int. J. Elec., 80, pp. 533–541, 1996.
J. Wu, ‘‘Current-mode high-order OTA-C filters’’, Int. J. Elec., 76, pp. 1115–1120, 1994.X. Zhang, X. Ni, M. Iwahashi and N. Kambayashi, ‘‘Implementation of active complex filter
with variable parameter using OTAs’’, IEICE Trans. Fund., E80-A, pp. 1721–1724,1997.
OTA-C Filter 383
Dow
nloa
ded
by [
RM
IT U
nive
rsity
] at
04:
56 2
1 M
arch
201
3