1#803 Introduction to saferigging practices
Rob Siemens
Wednesday, March 30, 201111:15 a.m. to 12:15 p.m.
Rigging SafetyEnhancing knowledge saves lives
Presented by: 888.829.9099
Many industries use Rigging
Regardless of what industry your in, youwill encounter some form of rigging. Lifting Pulling Cargo Securement
What saves lives is knowing yourequipment and understanding the properuse.
Presented by: 888.829.9099
Rigging in Construction
Today we hear of many accidents Most due human error
Unacceptable behavior
Example of howInjuries occur
Presented by: 888.829.9099
Construction Safetyimportance
Many dont realize the importance ofrigging safety until its to late Accidents resulting in death cause everyone
to reconsider their position on safety. The purpose of this conference is to ensure
those who go to work, return home safely andalive.
Presented by: 888.829.9099
Rigging Procedures in Construction
Christmas Treeing
Presented by: 888.829.9099
2Steel Connector
Presented by: 888.829.9099
(4)The multiple lift rigging assembly shall be rigged
with the members: rigged at least 7feet apart
rigged from the top down
attached at their center of gravity andmaintained level
Understand your Equipment
Regardless of your industry, you must:
Know the types of equipment needed inthe field.
Know the proper names for the equipment. Understand how to properly use them. Understand how to read the capacity
Commonly mistakenequipment
Shackles versus Clevises can be a deadlymistake.
Presented by: 888.829.9099
Presented by:
888.829.9099
Presented by:
888.829.9099
3Visit our booth
Should you have questions that we have notbeen able to answer, look for Royal Arcsbooth and we can discuss your individual
rigging applications.
Thank you!
Presented by: 888.829.9099
Royal Arc PresentsRoyal Arc Presents
SignalmenSignalmenRoyal Arc PresentsRoyal Arc Presents
SignalmenSignalmen
Hand Signals & Verbal Commands
Rob SiemensOSHA Authorized Instructor #:EKU00275
Royal Arc Industrial Services
Hand Signals & Verbal Commands
Rob SiemensOSHA Authorized Instructor #:EKU00275
Royal Arc Industrial Services
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Rigging Procedures in ConstructionRigging Procedures in Construction
Christmas Treeing Christmas Treeing
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Steel ConnectorSteel Connector
History
1914-1918 mobile cranes begin to appear 1916 first crane standard ASME 1920-1925 meetings and discussions on crane
safety ASME The Safety Code for Cranes Derricks & Hoists
ASA B30.2-1943 Jointly ASME and the U.S. Navy reorganized as
an American National Standards Committeein 1962 with 39 members and 27organizations
History
1914-1918 mobile cranes begin to appear 1916 first crane standard ASME 1920-1925 meetings and discussions on crane
safety ASME The Safety Code for Cranes Derricks & Hoists
ASA B30.2-1943 Jointly ASME and the U.S. Navy reorganized as
an American National Standards Committeein 1962 with 39 members and 27organizations
Quick History Tower Cranes are newer
than mobile cranes, butstill 100 years old
Less than 5% of craneaccidents involve towercranes. Most accidents occur onmobile equipment.
Most are designed inEurope(Germany,France, Italy, Spain), andnow China
Quick History Tower Cranes are newer
than mobile cranes, butstill 100 years old
Less than 5% of craneaccidents involve towercranes. Most accidents occur onmobile equipment.
Most are designed inEurope(Germany,France, Italy, Spain), andnow China
France, 1867France, 1867
Cologne, 1819Cologne, 1819
4England, ~1910 (Morris & Bastert)England, ~1910 (Morris & Bastert)
Germany, 1910 (Wolff)Germany, 1910 (Wolff)
Germany, 1913 (Wolff)Germany, 1913 (Wolff)Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Germany, 1949 (Liebherr)Germany, 1949 (Liebherr)
Germany, 1956 (Liebherr)Germany, 1956 (Liebherr)
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Denmark, 1975 (Kroll)Denmark, 1975 (Kroll)
Chicago, 2008 (Potain)Chicago, 2008 (Potain)
Chicago, 2006 (Linden)Chicago, 2006 (Linden)
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
5Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
ANSI A10.42-2000
5.2.1 CommunicationRiggers shall be capable of understandingspoken and written English and shouldunderstand the language in use at thelocation.
ANSI A10.42-2000
5.2.1 CommunicationRiggers shall be capable of understandingspoken and written English and shouldunderstand the language in use at thelocation.
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Title 8 CCR 5001.Title 8 CCR 5001.(a) A signal person shall be provided when the point of operation is not in full anddirect view of the operator unless a signaling or control device is provided for safedirection of the operator.(b) Only qualified persons shall be permitted to give signals.(c) A uniform signal system shall be used on all operations and if hand signals areused, they shall be clearly understood by the operator. (Note: For recommendedhand signals, see Plate I.)(d) Signal systems other than manual shall be protected against unauthorized use,breakage, weather or obstruction which will interfere with safe operation. In theevent of any known malfunction, an alternate signal system shall be used or allmotion shall be stopped.(e) There shall be conspicuously posted in the vicinity of the hoisting operations, alegible chart depicting and explaining the system of signals used.NOTE: Authority cited: Section 142.3, Labor Code. Reference: Section 142.3,Labor Code.
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
ASME B30.5 2004ASME B30.5 2004
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
ASME B30.5 2004ASME B30.5 2004
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
6Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
ASME B30.5 2004ASME B30.5 2004
Note: Examples of SignalsSwing right 50 feet, 25 feet, 15 feet, 10feet, 5 feet, 2 feet, swing stopLoad down 100 feet, 50 feet, 40 feet, 30feet, 2 feet, load stopLoad up slow, slow, slow, load stop
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
ANSI A10.42-2000ANSI A10.42-2000
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
ANSI A10.42-2000ANSI A10.42-2000
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
ANSIA10.42-2000
ANSIA10.42-2000
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
7Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.
Thank You!Thank You!
Points of view, ideas, products, demonstrations or devicespresented or displayed at the Ohio Safety Congress & Expo do notconstitute endorsements by BWC. BWC is not liable for any errorsor omissions in event materials.