8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
1/40
21A1KV15
21A1KV30
21A1KV15 12 ~ 2 1,5 1,48
0
30 18
21A1KV20 37 ~ 5 2 2
22 16
1235 30
14
21A1KV25
53 ~ 7
2,5 3,2
8 14 9
1230 25
14
21A1KV30 3 4
8 10 6
1225
18
14 20
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
AutomationHeating
subplate mounting
8W - 13 (1)BDA - BSA 155C (class F)BDV 180C (class H)12W - 13UDA 155C (class F)14W - 13
GDH - GDV 180C (class H)(1) Explosion-proof housing for coils with electricalconnections EN 175301-803 on request.
COIL HOUSING AND COIL FORMER MATERIAL AREMADE BY 100% VIRGIN MATERIAL.
Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
USE:USE:
COILSCOILS
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
28-02-2014 ODE 21A1KV15 21A1KV30
PIPES:PIPES:
Solenoid valve 2/2 way N.C.Direct acting
Gaskets Temperature Medium
V=FKM (fluoroelastomer) - 10C +140CMineral oils (2E),gasoline
gas oil, fuel oils (7E)
B=NBR (nitrile rubber) - 10C + 90C Air, inert gas, water
E=EPDM(ethylene-propylene)
- 10C +140C Water, steam
SUBPLATE
MOUNTING
For seals other than FKM replace the letter V with the ones
corresponding to the other seals. E.I. 21A1KB15.
Pipe CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
:PRESENTATION::PRESENTATION:
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
2/40
B 8 14,5 25 30 42 54
U 12 23 35 36 48 60
G 14 27 43 52 55 67
MATERIALS:MATERIALS:
DIMENSIONS:DIMENSIONS:
SPARE PARTS:SPARE PARTS:
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request:B=NBR E=EPDMOrifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
1. Coil:
See coils list
2. Complete plunger:
Code R450886/V
3. Complete armature tube:
Code R450606
4. Gasket O-Ring:
Code R990002/V
KT130KV30-A=2+3
KIT:KIT:
21A1KV15 21A1KV30 ODE 28-02-2014
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W Hold
VA ~
Inrush
VA ~
D
mm
E
mm
F
mm
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
3/40
21A1KR10
21A1KR30
21A1KR1012 ~ 2
1 0,45
8 0
40 23
21A1KR15 1,5 1,4 30 15
21A1KR20 37 ~ 5 2 2 25 9
21A1KR2553 ~ 7
2,5 3,2 14 5
21A1KR30 3 4 10 4
Direct acting S.V. for interception of fluids compatible with theconstruction material.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Hot water, Heating
Steam (180C)
subplate mounting
8W - 13
BDA - BSA 155C (class F)
BDV 180C (class H)COIL HOUSING AND COIL FORMER MATERIAL ARE
MADE BY 100% VIRGIN MATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
USE:USE:
COILS:COILS:
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
28-02-2014 ODE 21A1KR10 21A1KR30
PIPES:PIPES:
Solenoid valve 2/2 way N.C.Direct acting
NoteThe use of rigid sealings usually implies a slight leakage, limited within 2scc/min at the pressure of 1 bar..
Gaskets Temperature Medium
R=RUBY - 40C + 180CSteam, water, mineral oils (2E),
gas oil, fuel oils (7E)
SUBPLATE
MOUNTING
Pipe CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
:PRESENTATION::PRESENTATION:
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
4/40
B 8 14,5 25 30 42 54
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
Body Brass - UNI EN 12165 CW617N
Armature tube Stainless steel series 300Fixed core Stainless steel series 400
Plunger Stainless steel series 300
Phase displacement ring Copper - Cu 99,9%Spring Stainless steel series 300
Seal R=RUBY
Orifice: Inserted slot Stainless steel series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
1. Coil:
See coils list
2. Complete plunger:
Code R450820/R
3. Complete armature tube:
Code R450606
4. Gasket O-Ring:
Code R990002/S
KT130KR30-A=2+3
KIT:KIT:
21A1KR10 21A1KR30 ODE 28-02-2014
DIMENSIONS:DIMENSIONS:
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~ InrushVA ~ Dmm Emm Fmm
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
5/40
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COIL:COIL:
12-05-2014 (Internal technical data sheet) ODE 21A1ZR15D-GB
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
21A1ZR15D-GBSolenoid valve 2/2 way N.O.Direct acting - dampness-proof IP 67
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
AutomationHeating
subplate mounting
8W - 13BDV 180C (class H)
COIL HOUSING AND COIL FORMER MATERIAL AREMADE BY 100% VIRGIN MATERIAL.
Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
Pipe CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
SUBPLATE
MOUNTING21A1ZR15D-GB 12 ~ 2 1,5 1,4 8 0 35 35
Gaskets Temperature Medium
R=RUBY - 40C + 180CWater, mineral oils (2E),
gas oil, fuel oils (7E)
NoteAlso available with brass body without lead.
Available on request and with minimum quantities.
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
6/40
21A1ZR15D-GB (Internal technical data sheet) ODE 12-05-2014
DIMENSIONS:DIMENSIONS:
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:
1. Coil:
See coils list
2. Complete diaphragmsupport:
Code R450789/V
3. Gasket O-Ring:
Code R990015/S
4. Complete armature tube
without gasket:
Code R450573
5. Gasket O-Ring:
Code R990000/V
6. Gasket O-Ring:
Code R990002/S
7. Gasket O-Ring:Code R990001/S
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal R=RUBYOrifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 67 EN 60529 (DIN 40050)
with coil fitted by connector dedicated
KIT:KIT:
KT130ZR30-FG=2+3+4+5+7+8+9
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~ InrushVA ~ Dmm Emm Fmm
B 8 14,5 25 30 42 54
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
7/40
21AN2ZR20D-TF
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Hot water, Heating
Steam (180C)
1/4 NPT
8W - 13
BDA - BSA 155C (class F)
BDV 180C (class H)
Solenoid valve 2/2 way N.O.Direct acting
12-05-2014 (Internal technical data sheet) ODE 21AN2ZR20D-TF
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COIL:COIL:
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
COIL HOUSING AND COIL FORMER MATERIAL ARE
MADE BY 100% VIRGIN MATERIAL.
Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
NoteAvailable on request and with minimum quantities.The use of rigid sealings usually implies a slight leakage, limited within 2 scc/min at the pressure of 1 bar.
PipeANSI/ASME
BI.20.1
CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
1/4 NPT 21AN2ZR20D-TF 37 ~ 5 2 2 8 0 30 30
Gaskets Temperature Medium
R=RUBY - 40C + 180CSteam, water, mineral oils (2E),
gas oil, fuel oils (7E)
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
8/40
1. Coil:
BDV08224BU
2. Complete diaphragmsupport:
Code R450789
3. Complete armature tube
without gasket:
Code R450573
4. Gasket O-Ring:
Code R990000/F
KIT:KIT:
KT130ZR30-FF=2+3+4
21AN2ZR20D-TF (Internal technical data sheet) ODE 12-05-2014
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal R=RUBY
Orifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
DIMENSIONS:DIMENSIONS:
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
MATERIALS:MATERIALS:
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~
InrushVA ~
Dmm
Emm
Fmm
B 8 14,5 25 30 42 54
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
9/40
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COIL:COIL:
12-05-2014 (Internal technical data sheet) ODE 21A1ZV25D-X007
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
21A1ZV25D-X007
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
AutomationHeating
subplate mounting
8W - 13BDV 180C (class H)
Solenoid valve 2/2 way N.O.Direct acting - dampness-proof IP 67
COIL HOUSING AND COIL FORMER MATERIAL ARE
MADE BY 100% VIRGIN MATERIAL.
Max. allowable pressure ( (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
Gaskets Temperature Medium
V=FKM (fluoroelastomer) - 10C + 140CMineral oils (2E),gasoline
gas oil, fuel oils (7E)
NoteAlso available with brass body without lead.
Available on request and with minimum quantities.
Pipe CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
SUBPLATE
MOUNTING21A1ZV25D-X007 53 ~ 7 2,5 3,2 8 0 14 14
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
10/40
21A1ZV25D-X007 (Internal technical data sheet) ODE 12-05-2014
DIMENSIONS:DIMENSIONS:
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal V=FKM
Orifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector dedicated.
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~ InrushVA ~ Dmm Emm Fmm
B 8 14,5 25 30 42 54
1. Coil:
See coils list
2. Complete diaphragmsupport:
Code R450788/V
3. Complete armature tube
without gasket:
Code R450573
4 . Gasket O-Ring:
CodeR990000/V
6. Gasket O-Ring:
Code R990002/VV
KIT:KIT:
KT130ZV30-FG=2+3+4+6+7+8+9
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
11/40
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COIL:COIL:
12-05-2014 (Internal technical data sheet) ODE 21A1ZR20D-TF
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
21A1ZR20D-TF
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
AutomationHeating
subplate mounting
8W - 13BDA - BSA 155C (class F)BDV 180C (class H)
Solenoid valve 2/2 way N.O.Direct acting
COIL HOUSING AND COIL FORMER MATERIAL ARE
MADE BY 100% VIRGIN MATERIAL.
Pipe CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
SUBPLATE
MOUNTING21A1ZR20D-TF 37 ~ 5 2 2 8 0 30 30
Gaskets Temperature Medium
R=RUBY - 40C + 180CWater, mineral oils (2E), gas
oil, fuel oils (7E)
Note
Available on request and with minimum quantities.
Max. allowable pressure ( (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
12/40
21A1ZR20D-TF (Internal technical data sheet) ODE 12-05-2014
DIMENSIONS:DIMENSIONS:
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:
1. Coil:
See coils list
2. Complete diaphragmsupport:
Code R450789
3. Complete armature tube
without gasket:
Code R450573
4. Gasket O-Ring:
Code R990000/F
5. Gasket O-Ring:
Code R990002/F
KIT:KIT:
KT130ZR30-FF=2+3+4
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal R=RUBY
Orifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~ InrushVA ~ Dmm Emm Fmm
B 8 14,5 25 30 42 54
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
13/40
21A3KV15
21A2KV55
G 1/8
21A3KV15 12 ~ 2 1,5 1,48
0
30 18
21A3KV20 37 ~ 5 2 222 16
1235 30
14
21A3KV25
53 ~ 7
2,5 3,28 14 912
30 2514
21A3KV30 3 48 10 612
2518
14 20
21A3KV45 4,5 6,5 8 5 21212
714 8
G 1/4
21A2KV15 12 ~ 2 1,5 1,48
30 18
21A2KV20 37 ~ 5 2 222 16
1235 30
14
21A2KV25
53 ~ 7
2,5 3,28 14 912
30 2514
21A2KV30 3 48 10 612
2518
14 20
21A2KV45 4,5 6,58 5 212
127
14 8
21A2KV55 5,5 98 3 112 7 2,514 10 5
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
COILS:COILS:
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
28-02-2014 ODE 21A3KV15 21A2KV55
Solenoid valve 2/2 way N.C.Direct acting
PIPES:PIPES:
AutomationHeating
G 1/8 - G 1/4
8W - 13 (1)BDA - BSA 155C (class F)BDV 180C (class H)12W - 13UDA 155C (class F)14W - 13
GDH - GDV 180C (class H)(1) Explosion-proof housing for coils with electricalconnections EN 175301-803 on request.
COIL HOUSING AND COIL FORMER MATERIAL AREMADE BY 100% VIRGIN MATERIAL.
Gaskets Temperature Medium
V=FKM (fluoroelastomer) - 10C +140CMineral oils (2E),gasoline
gas oil, fuel oils (7E)
B=NBR (nitrile rubber) - 10C + 90C Air, inert gas, water
E=EPDM(ethylene-propylene)
- 10C +140C Water, steam
Note Also available with brass body without lead.
Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
For seals other than FKM replace the letter V with the ones
corresponding to the other seals. E.I. 21A2KE20.
PipeISO 228/1
CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
:PRESENTATION::PRESENTATION:
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
14/40
21A3KV G 1/8
21A2KV G 1/4
B 8 14,5 25 30 42 54
U 12 23 35 36 48 60
G 14 27 43 52 55 67
MATERIALS:MATERIALS:
DIMENSIONS:DIMENSIONS:
SPARE PARTS:SPARE PARTS:
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request: B=NBR E=EPDMOrifice:
< 3 mm Insert slot Stainless steel AISI series 300> 3 mm Brass - UNI EN 12165 CW617NOn request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
1. Coil:
See coils list
2. Complete plunger:For orifice < 3 mm
Code R450886/V
For orifice > 3 mmCode R450898/V
3. Complete armature tube:
Code R450606
< 3 mm
KT130KV30-A=2+3> 3 mm
KT130KV55-A=2+3
KIT:KIT:
21A3KV15 21A2KV55 ODE 28-02-2014
TypePipe
ISO 228/1
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~
InrushVA ~
Dmm
Emm
Fmm
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
15/40
PRESENTAZIONE:PRESENTAZIONE:
IMPIEGO:IMPIEGO:
RACCORDI:RACCORDI:
BOBINE:BOBINE:
12-05-2014 (Scheda tecnica interna) ODE 21A2K[0]V25-W 21A2K[0]V55-W
21A2K[0]V25-W
21A2K[0]V55-W
Elettrovalvola 2/2 vie N.C.Comando diretto
E.V. ad azione diretta adatta allintercettazione dei fluidicompatibili con i materiali costruttivi.
Non richiesta una pressione minima di funzionamento.I materiali utilizzati e le prove eseguite garantisconoaffidabilit e durata.
La ODE si riserva il diritto di apportare modifiche tecniche ed estetiche senza obbligo di preavviso.
AutomazioneRiscaldamento
G 1/4
8W - 13BDA - BSA 155C (classe F)BDV 180C (classe H)12W - 13
UDA 155C (classe F)14W - 13GDH - GDV 180C (classe H)
Per tenute diverse dal FKM sostituire la lettera V con le letterecorrispondenti alle altre tenute. Es. 21A2K[0]B30-W.
INCAPSULAMENTO E ROCCHETTO SONO REALIZZATICON MATERIALE VERGINE AL 100%.Pressione massima ammissibile (PS) 40 barTemperatura ambiente:Consultare le pagine di catalogo bobine per le relative compatibilit.
Guarnizioni Temperatura Fluidi
V=FKM
(elastomero fluorurato)
- 10C +140COlii leggeri (2E),benzina
gasolio, olii combustibili (7E)
B=NBR (nitrile) - 10C + 90C Acqua, aria, gas inerti
E=EPDM (etilene-propilene) - 10C +140C Acqua, vapore
NoteSu richiesta e per quantit.Disponibili anche con corpo in ottone senza piombo.
RaccordoISO 228/1
Codice
Viscosita maxammissibile
mm
Kv PotenzaPressione
min M.O.P.D.
cSt E l/min watt bar AC bar DC bar
G 1/4
21A2K[0]V25-W
53 ~ 7
2,5 3,28
0
35 20
21A2K[0]V30-W 3 4 18 13
21A2K[0]V45-W 4,5 6,5
10 5
12 17 8
14 18 16
21A2K[0]V55-W 5,5 9
8 7 2
12 10 3,5
14 13 7
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
16/40
21A2K[0]V25-W 21A2K[0]V55-W (Scheda tecnica interna) ODE 12-05-2014
DIMENSIONI:DIMENSIONI:
MATERIALI:MATERIALI:
CARATTERISTICHE:CARATTERISTICHE:
SPARE PARTS:SPARE PARTS:PARTI DI RICAMBIO:PARTI DI RICAMBIO:
1. Bobina:
Vedi elenco bobine
2 . Assieme nucleo mobile:Cod. R450898/V-2561
3. Assieme cannotto:
Cod. R450606
KIT:KIT:
KT130KV55-AM=2+3
Corpo Ottone - UNI EN 12165 CW617NCannotto Acciaio inox AISI serie 300Nucleo fisso Acciaio inox AISI serie 400Nucleo mobile Acciaio inox AISI serie 400Anello di sfasamento Rame - Cu 99,9%Molla Acciaio inox AISI serie 300Otturatore Standard: V=FKM
A richiesta: B=NBR E=EPDMOrificio:
< 3 mm Sede Riportata Acciaio inox AISI serie 300> 3 mm Ottone - UNI EN 12165 CW617NA richiesta:Connettore Pg 9 o Pg 11Conformit connettore ISO 4400
Conformit elettriche IEC 335Grado di protezione IP 65 EN 60529 (DIN 40050)
con elettromagnete corredato di connettore.
BOBINA
TIPO
POTENZA DIMENSIONI
W Esercizio
VA ~
Allo spunto
VA ~
D
mm
E
mm
F
mm
B 8 14,5 25 30 42 54
U 12 23 35 36 48 60
G 14 27 43 52 55 67
TipoRaccordo
ISO 228/1
21A2K[0]V25-W
G 1/421A2K[0]V30-W
21A2K[0]V45-W
21A2K[0]V55-W
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
17/40
212A3KV15
212A2KV55
::
G 1/8
212A3KV15 12 ~ 2 1,5 1,48
0
30 18
212A3KV20 37 ~ 5 2 222 16
1235 30
14
212A3KV25
53 ~ 7
2,5 3,28 14 912
30 2514
212A3KV30 3 48 10 612
2518
14 20
212A3KV45 4,5 6,58 5 212
127
14 8
G 1/4
212A2KV15 12 ~ 2 1,5 1,48
30 18
212A2KV20 37 ~ 5 2 222 16
1235 30
14
212A2KV25
53 ~ 7
2,5 3,28 14 912
30 2514
212A2KV30 3 48 10 612
2518
14 20
212A2KV45 4,5 6,58 5 212
127
14 8
212A2KV55 5,5 98 3 112 7 2,514 10 5
Solenoid valve 2/2 way N.C.Direct acting
USE:USE:
COILS:COILS:
PIPES:PIPES:
28-02-2014 ODE 212A3KV15 212A2KV55
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
AutomationHeating
G 1/8 - G 1/4
8W - 13BDA - BSA 155C (class F)BDV 180C (class H)12W - 13
UDA 155C (class F)14W - 13GDH - GDV 180C (class H)
COIL HOUSING AND COIL FORMER MATERIAL AREMADE BY 100% VIRGIN MATERIAL.
Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
Gaskets Temperature Medium
V=FKM (fluoroelastomer) - 10C +140CMineral oils (2E), gasoline
gas oil, fuel oils (7E)
B=NBR (nitrile rubber) - 10C + 90C Air, inert gas, water
For seals other than FKM replace the letter V with the onescorresponding to the other seals. E.I. 212A2KB15.
Pipe
ISO 228/1Code
Max viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
PRESENTATION:PRESENTATION:
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
18/40
212A3KV G 1/8
212A2KV G 1/4
B 8 14,5 25 30 42 54
U 12 23 35 36 48 60
G 14 27 43 52 55 67
212A3KV15 212A2KV55 ODE 28-02-2014
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
DIMENSIONS:DIMENSIONS:
Body Brass - UNI EN 12165 CW617NWelded armature tube Stainless steel AISI series 300 +
Brass - UNI EN 12165 CW617NFixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request: B=NBROrifice:
< 3 mm Insert slot Stainless steel AISI series 300> 3 mm Brass - UNI EN 12165 CW617NOn request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
KS130KV55-F= 2+3+4
KIT:KIT:
TypePipe
ISO 228/1
1. Coil:
See coils list
2. Complete plunger:
Code R450898/V
3. Complete armature tube:
Code R450691
4. Gasket O-Ring:
Code R990000/V
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~
InrushVA ~
Dmm
Emm
Fmm
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
19/40
21A3KR15
21A2KR30
G 1/8
21A3KR15 12 ~ 2 1,5 1,4
8 0
35 15
21A3KR20 37 ~ 5 2 2 25 9
21A3KR2553 ~ 7
2,5 3,2 14 5
21A3KR30 3 4 10 4
G 1/4
21A2KR15 12 ~ 2 1,5 1,4 35 15
21A2KR20 37 ~ 5 2 2 25 9
21A2KR2553 ~ 7
2,5 3,2 14 5
21A2KR30 3 4 10 4
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Hot water, HeatingSteam (180C)
G 1/8 - G 1/4
8W - 13
BDA - BSA 155C (class F)
BDV 180C (class H)
COIL HOUSING AND COIL FORMER MATERIAL ARE
MADE BY 100% VIRGIN MATERIAL.
USE:USE:
COILS:COILS:
28-02-2014 ODE 21A3KR15 21A2KR30
Solenoid valve 2/2 way N.C.Direct acting
PIPES:PIPES:
NoteAlso available with brass body without lead.The use of rigid sealings usually implies a slight leakage, limited within 2scc/min at the pressure of 1 bar.
Gaskets Temperature Medium
R=RUBY - 40C +180CSteam, water, mineral oils (2E),
gas oil, fuel oils (7E)
T=PTFE(polytetrafluorethylen)
- 40C +180C Steam, water
Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
For seals other than RUBY replace the letter R with the onescorresponding to the other seals. E.I. 21A3KT15.
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
PipeISO 228/1
CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
:PRESENTATION::PRESENTATION:
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
20/40
21A3KR G 1/8
21A2KR G 1/4 B 8 14,5 25 30 42 54
MATERIALS:MATERIALS:
DIMENSIONS:DIMENSIONS:
SPARE PARTS:SPARE PARTS:
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: R=RUBY
On request:T=PTFE
Orifice: Insert slot Stainless steel AISI series 300On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
1. Coil:
See coils list
2. Complete plunger:
Code R450820/R
3. Complete armature tube:
Code R450606
KT130KR30-A=2+3
KIT:KIT:
21A3KR15 21A2KR30 ODE 28-02-2014
TypePipe
ISO 228/1 COIL
TYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~ InrushVA ~ Dmm Emm Fmm
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
21/40
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COILS:COILS:
12-05-2014 (Internal technical data sheet) ODE 21A2KT55-W
21A2KT55-WSolenoid valve 2/2 way N.C.Direct acting
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
COIL HOUSING AND COIL FORMER MATERIAL ARE
MADE BY 100% VIRGIN MATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
PipeISO 228/1
CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
G 1/4 21A2KT55-W - - 5,5 9 8 0 6 2
AutomationHeating
G 1/4
8W - 13
BDA - BSA 155C (class F)
BDV 180C (class H)
Gaskets Temperature Medium
T=PTFE(polytetrafluorethylen)
- 40C + 180C Steam, water
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
Note.Available on request and with minimum quantities.With double-frequency coils the MOPD is 15% lower
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
22/40
21A2KT55-W (Internal technical data sheet) ODE 12-05-2014
DIMENSIONS:DIMENSIONS:
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:
1. Coil:
See coils list
2. Complete plunger:Code R451234/T
3. Complete armature tube:
Code R450606
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300
Fixed core Stainless steel AISI series 400
Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%
Spring Stainless steel AISI series 300
Seal T=PTFEOrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
BOBINE
TYPE
PUISSANCE NOMINALE Ecombrements
W MaintienVA ~ AppelVA ~ Dmm Emm Fmm
B 8 14,5 25 30 42 54
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
23/40
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COIL:COIL:
12-05-2014 (Internal technical data sheet) ODE 21A2K0E45-OR 21A2K0E55-OR
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
21A2K0E45-OR
21A2K0E55-OR
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Solenoid valve 2/2 way N.C.Direct acting
Gaskets Temperature Medium
E=EPDM(ethylene-propylene)
- 10C +140C Water, steam
PipeISO 228/1
CodeMax viscosity
mm
Kv PotenzaPressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
G 1/421A2K0E45-OR
53 ~ 74,5 6,5
8 05 2
21A2K0E55-OR 5,5 9 3 1
NoteAvailable on request and with minimum quantities.Also available with brass body without lead.
AutomationHeating
G 1/4
8W - 13
BDA - BSA 155C (class F)
BDV 180C (class H)
COIL HOUSING AND COIL FORMER MATERIAL ARE
MADE BY 100% VIRGIN MATERIAL.
Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
24/40
21A2K0E45-OR 21A2K0E55-OR (Internal technical data sheet) ODE 12-05-2014
DIMENSIONS:DIMENSIONS:
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:
1. Coil:
BDF08024DS
2 . Complete plunger:Code R450898/E
3. Complete armature tube:
Code R450603
4. Gasket O-Ring:
Code R990000/E
KIT:KIT:
KT130KE55-F=2+3+4
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300
Fixed core Stainless steel AISI series 400
Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%
Spring Stainless steel AISI series 300
Seal E=EPDMOrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~ InrushVA ~ Dmm Emm Fmm
B 8 14,5 25 30 42 54
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
25/40
21A2KL45-RPW
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
AutomationHeating
G 1/4
8W - 13BDA - BSA 155C (class F)BDV 180C (clase H)
Solenoid valve 2/2 way N.C.Direct acting
12-05-2014 (Internal technical data sheet) ODE 21A2KL45-RPW
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COILS:COILS:
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
NoteAvailable on request and with minimum quantities.Also available with brass body without lead.
COIL HOUSING AND COIL FORMER MATERIAL ARE
MADE BY 100% VIRGIN MATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
PipeISO 228/1
CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
G 1/4 21A2KL45-RPW 53 ~ 7 4,5 6,5 8 0 10 3,5
Gaskets Temperature Medium
L=Rulon(fluoropolimer)
- 40C +180C
Water, air , inert gas,
mineral oils (2E), steam,
gasoline, gas oil
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
26/40
1. Coil:
See coils list
2 . Complete plunger:Code R452718/L
3. Complete armature tube:
Code R450603
4. Gasket O-Ring:
Code R990000/VV
21A2KL45-RPW (Internal technical data sheet) ODE 12-05-2014
DIMENSIONS:DIMENSIONS:
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
MATERIALS:MATERIALS:
KIT:KIT:
KT130KL55-GM=2+3+4
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300
Fixed core Stainless steel AISI series 400
Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%
Spring Stainless steel AISI series 300
Seal R=RulonOrifice: Insert slot Stainless steel AISI series 300
On request:
Connector Pg 9 or Pg 11
Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
COILTYPE
POWER ABSORPTION DIMENSIONS
W Hold
VA ~
Inrush
VA ~
D
mm
E
mm
F
mm
B 8 14,5 25 30 42 54
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
27/40
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
28/40
21A3ZR G 1/8
21A2ZR G 1/4
B 8 14,5 25 30 42 54
U 12 23 35 36 48 60
G 14 27 43 52 55 67
Body Brass - UNI EN 12165 CW617N
Armature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400
Plunger Stainless steel AISI series 400
Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300
Seal R=RUBY
Orifice: Insert slot Stainless steel AISI series 300
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:
DIMENSIONS:DIMENSIONS:
1. Coil:See coils list
2. Complete diaphragm
support:8W Code R450789
12W - 14WCode R450789/14
3. Complete armature tubewithout gasket:
Code R450573
4. Gasket O-Ring:
Code R990000/V
21A3ZR15D 21A2ZR30G ODE 28-02-2014
8W
KT130ZR30-F=2+3+412W - 14W
KT130ZR30-G=2+3+4
KIT:KIT:
TypePipe
ISO 228/1
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W Hold
VA ~
Inrush
VA ~
D
mm
E
mm
F
mm
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
29/40
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
30/40
21A3ZV G 1/8
21A2ZV G 1/4
B 8 14,5 25 30 42 54
U 12 23 35 36 48 60
G 14 27 43 52 55 67
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request: B=NBROrifice:
< 3 mm Insert slot Stainless steel AISI series 300> 3 mm Brass - UNI EN 12165 CW617NOn request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:
DIMENSIONS:DIMENSIONS:
1. Coil:See coils list
2. Complete diaphragm
support:For orifice < 3 mm8W Code R450788/V12W - 14W
Code R450788/V14For orifice > 3 mm8W Code R450786/V
12W - 14WCode R450786/V14
3. Complete armature tubewithout gasket:Code R450573
4. Gasket O-Ring:Code R990000/V
21A3ZV15D 21A2ZV55G ODE 28-02-2014
Orifice 3 mm
8W
KT130ZV55-F=2+3+4
12W - 14W
KT130ZV55-G=2+3+4
KIT:KIT:
TypePipe
ISO 228/1
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W Hold
VA ~
Inrush
VA ~
D
mm
E
mm
F
mm
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
31/40
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COILS:COILS:
12-05-2014 (Internal technical data sheet) ODE 21A5KT55-W
21A5KT55-WSolenoid valve 2/2 way N.C.Direct acting
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
PipeISO 228/1
CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/min watt bar AC bar DC bar
G 3/8 21A5KT55-W - - 5,5 9 8 0 6 2
Gaskets Temperature Medium
T=PTFE(polytetrafluorethylen)
- 40C + 180C Steam, water
Note.Available on request and with minimum quantities.With double-frequency coils the MOPD is 15% lower
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
AutomationHeating
G 3/8
8W - 13BDA - BSA 155C (class F)BDV 180C (class H)12W - 13UDA 155C (class F)
14W - 13GDH - GDV 180C (class H)
COIL HOUSING AND COIL FORMER MATERIAL AREMADE BY 100% VIRGIN MATERIAL.
Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
32/40
21A5KT55-W (Internal technical data sheet) ODE 12-05-2014
DIMENSIONS:DIMENSIONS:
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:
1. Coil:
See coils list
2. Complete plunger:Code R451234/T
3. Complete armature tube:
Code R450606
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300
Fixed core Stainless steel AISI series 400
Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%
Spring Stainless steel AISI series 300
Seal T=PTFEOrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
KIT:KIT:
KT130KT55-AM =2+3
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~ InrushVA ~ Cmm Dmm Emm Fmm
B 8 14,5 25 46 30 42 54
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
33/40
21A5KT45
21A8KT55
G 3/8
21A5KT45
- -
4,5 6,5
8
0
5 1,5
12 10 3,5
14 12 6
21A5KT55 5,5 9
8 3,5 1
12 6 2
14 7 5
G 1/2
21A8KT45 4,5 6,5
8 5 1,5
12 10 3,5
14 12 6
21A8KT55 5,5 9
8 3,5 1
12 6 2
14 7 5
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
COILS:COILS:
PIPES:PIPES:
Solenoid valve 2/2 way N.C.Direct acting
28-02-2014 ODE 21A5KT45 21A8KT55
Guarnizioni Temperature Medium
T=PTFE(polytetrafluorethylen)
- 40C + 180C Water, steam
AutomationHeating
G 3/8 - G 1/2
8W - 13BDA - BSA 155C (class F)BDV 180C (class H)12W - 13UDA 155C (class F)
14W - 13GDH - GDV 180C (class H)
COIL HOUSING AND COIL FORMER MATERIAL AREMADE BY 100% VIRGIN MATERIAL.
Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
PipeISO 228/1
CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
:PRESENTATION::PRESENTATION:
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
34/40
B 8 14,5 25 30 42 54
U 12 23 35 36 48 60
G 14 27 43 52 55 67
21A5KT G 3/8 46
21A8KT G 1/2 58
21A5KT45 21A8KT55 ODE 28-02-2014
Body Brass - UNI EN 12165 CW617N
Armature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400
Plunger Stainless steel AISI series 400
Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300
Seal T=PTFE
Orifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
DIMENSIONS:DIMENSIONS:
1. Coil:
See coils list
2. Complete plunger:
Code R451234/T
3. Complete armature tube:
Code R450606
KIT:KIT:
KT130KT55-A=2+3
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W Hold
VA ~
Inrush
VA ~
D
mm
E
mm
F
mmTypePipe
ISO 228/1
C
mm
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
35/40
21A5KV45
21A8KV55
G 3/8
21A5KV45
53 ~ 7
4,5 6,5
8
0
5 2
1212
7
14 8
21A5KV55 5,5 9
8 3 1
12 7 2,5
14 10 5
G 1/2
21A8KV45 4,5 6,5
8 5 2
1212
7
14 8
21A8KV55 5,5 9
8 3 1
12 7 2,5
14 10 5
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
COILS:COILS:
PIPES:PIPES:
Solenoid valve 2/2 way N.C.Direct acting
28-02-2014 ODE 21A5KV45 21A8KV55
Gaskets Temperature Medium
V=FKM (fluoroelastomer) - 10C +140CMineral oils (2E),gasoline
gas oil, fuel oils (7E)
B=NBR (nitrile rubber) - 10C + 90C Air, inert gas, water
AutomationHeating
G 3/8 - G 1/2
8W - 13BDA - BSA 155C (class F)BDV 180C (class H)12W - 13UDA 155C (class F)
14W - 13GDH - GDV 180C (class H)(1) Explosion-proof housing for coils with electrical
connections EN 175301-803 on request.
COIL HOUSING AND COIL FORMER MATERIAL AREMADE BY 100% VIRGIN MATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
For seals other than FKM replace the letter V with the onescorresponding to the other seals. E.I. 21A5KB55.
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
Pipe
ISO 228/1Code
Max viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
:PRESENTATION::PRESENTATION:
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
36/40
B 8 14,5 25 30 42 54
U 12 23 35 36 48 60
G 14 27 43 52 55 67
21A5KV G 3/8 46
21A8KV G 1/2 58
21A5KV45 21A8KV55 ODE 28-02-2014
1. Coil:
See coils list
2. Complete plunger:
Code R450898/V
3. Complete armature tube:
Code R450606
KT130KV55-A=2+3
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request:B=NBROrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
DIMENSIONS:DIMENSIONS:
KIT:KIT:
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W Hold
VA ~
Inrush
VA ~
D
mm
E
mm
F
mmTypePipe
ISO 228/1
C
mm
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
37/40
212A5KV45
212A8KV55
G 3/8
212A5KV45
53 ~ 7
4,5 6,5
8
0
5 2
1212
7
14 8
212A5KV55 5,5 9
8 3 1
12 7 2,5
14 10 5
G 1/2
212A8KV45 4,5 6,5
8 5 2
1212
7
14 8
212A8KV55 5,5 9
8 3 1
12 7 2,5
14 10 5
Solenoid valve 2/2 way N.C.Direct acting
USE:USE:
COILS:COILS:
PIPES:PIPES:
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Gaskets Temperature Medium
V=FKM (fluoroelastomer) - 10C + 140CMineral oils (2E), gasoline
gas oil, fuel oils (7E)
AutomationHeating
G 3/8 - G 1/2
8W - 13BDA - BSA 155C (class F)BDV 180C (class H)12W - 13UDA 155C (class F)
14W - 13GDH - GDV 180C (class H)
COIL HOUSING AND COIL FORMER MATERIAL AREMADE BY 100% VIRGIN MATERIAL
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
PipeISO 228/1
CodeMax viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
28-02-2014 ODE 212A5KV45 212A8KV55
PRESENTATION:PRESENTATION:
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
38/40
B 8 14,5 25 30 42 54
U 12 23 35 36 48 60
G 14 27 43 52 55 67
212A5KV G 3/8 46
212A8KV G 1/2 58
1. Coil:
See coils list
2. Complete plunger:
Code R450898/V
3. Complete armature tube:
Code R450691
4. Gasket O-Ring:
Code R990000/V
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
DIMENSIONS:DIMENSIONS:
FEATURES:FEATURES:
KS130KV55-F= 2+3+4
KIT:KIT:
212A5KV45 212A8KV55 ODE 28-02-2014
Body Brass - UNI EN 12165 CW617N
Welded armature tube Stainless steel AISI series 300 +Brass - UNI EN 12165 CW617N
Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal V=FKMOrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
COILTYPE
POWER ABSORPTION DIMENSIONS
W Hold
VA ~
Inrush
VA ~
D
mm
E
mm
F
mmTypePipe
ISO 228/1
C
mm
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
39/40
21A5ZV45D
21A8ZV55G
G 3/8
21A5ZV45D
53 ~ 7
4,5 6,5
8
0
4 4
21A5ZV45G12
6-
14 6
21A5ZV55D
5,5 9
8 2,5 2,5
21A5ZV55G
12
3,5
-
14 3,5
G 1/2
21A8ZV45D
4,5 6,5
8 4 4
21A8ZV45G12
6-
14 6
21A8ZV55D
5,5 9
8 2,5 2,5
21A8ZV55G12
3,5-
14 3,5
Direct acting S.V. for interception of fluids compatible with theconstruction materials.
Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
COILS:COILS:
PIPES:PIPES:
Solenoid valve 2/2 way N.O.Direct acting
The ODE reserves the right to carry out technical and aesthetic modifications without prior notification.
28-02-2014 ODE 21A5ZV45D 21A8ZV55G
Gaskets Temperature Medium
V=FKM (fluoroelastomer) - 10C +140CMineral oils (2E),gasoline
gas oil, fuel oils (7E)
B=NBR (nitrile rubber) - 10C + 90C Air, inert gas, water
AutomationHeating
G 3/8 - G 1/2
8W - 13BDA - BSA 155C (class F)BDV 180C (class H)12W - 13UDA 155C (class F)
14W - 13GDH - GDV 180C (class H)
COIL HOUSING AND COIL FORMER MATERIAL AREMADE BY 100% VIRGIN MATERIAL.
Max. allowable pressure (PS) 40 barAmbient temperature:See coils catalogue page for its compatibility.
For seals other than FKM replace the letter V with the ones
corresponding to the other seals. E.I. 21A5ZB45D.
Pipe
ISO 228/1Code
Max viscosity
mm
Kv Power Pressure
min M.O.P.D.
cSt E l/mn watt bar AC bar DC bar
PRESENTATION:PRESENTATION:
8/10/2019 48318 21A Solenoid Valves Series Datasheet (1)
40/40
::
1. Coil:See coils list
2. Complete diaphragm
support:8W Code R450786/V
12W - 14WCode R450786/V14
3. Complete armature tubewithout gasket:
Code R450573
4. Gasket O-Ring:
Code R990000/V
8W
KT130ZV55-F=2+3+412W -14W
KT130ZV55-G=2+3+4
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 400Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request: B=NBROrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
MATERIALS::MATERIALS::
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
DIMENSIONS:DIMENSIONS:
KIT:KIT:
COIL
TYPE
POWER ABSORPTION DIMENSIONS
W Hold
VA ~
Inrush
VA ~
D
mm
E
mm
F
mmTypePipe
ISO 228/1
C
mm