1
N/en 1.5.135.0110/09 Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this document.
PRA/182000, PRA/182000/M
Profile cylinders conforms to ISO 15552
Non-magnetic and magnetic piston Double acting
Ø 32 to 125 mm
High performance, stability and reliability
M/50 switches can be mounted flush with the profile
Cylinders and mountings conform to ISO 15552 (ISO 6431, VDMA 24562 and NFE 49-003-1)
Polyurethane seals ensure efficient low friction operation and long life
Technical dataMedium:Compressed air, filtered, lubricated or non-lubricatedStandard:ISO 15552Operation:PRA/182000: double acting, adjustable cushioningPRA/182000/M: double acting, magnetic piston, adjustable cushioningOperating pressure:1 to 16 barOperating temperature:-20 to +80°C max. (consult our Technical Service for use below +2°C)High temperature version: 150°C max.Cylinder diameters:32, 40, 50, 63, 80, 100, 125 mmStrokes:Standard: see page 3Non-standard strokes available (10 to 3000 mm)
Materials:Profile barrel: anodised aluminiumEnd covers: pressure diecast aluminium Piston rod: stainless steel (Martensitic) Piston rod seals: polyurethane Piston seals: polyurethaneO-rings: nitrile rubber
Ordering examplesSee page 3
Mountings and switchesSee page 4 and 5
Alternative variantsSingle acting cylinders see page N/en 1.4.121Cylinder with locking unitSee data sheet N/en 1.5.125.09 and 10Guide blocks see page N/en 1.10.021
Magnetic pistonNon-magnetic piston
®®
TECH DATA SHEET 1052924/03/15
210/09
®®
N/en 1.5.135.02
PRA/182000, PRA/182000/M
Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this document.
H T
For the cylinder models style H*1), T, C and S see options selector*1) Cylinder style H: Ø 32 ... 100 mm
Cylinder variants
H T
Symbol Model Symbol Model Description DimensionsNon-magnetic magnetic
H T C S piston H T C S piston Page• • • • PRA/182000 • • • • PRA/182000/M Standard cylinder 6
• • PRA/182000/W1 • • PRA/182000/W2 Cylinder with special wiper/seal (suitable for appl. with 6cement, plaster (stucco), arizona sand,hoar-frost or ice)
• • PRA/182000/X1 • • PRA/182000/X2 Low friction cylinders, operating pressure: 1 to 10 bar 6Medium: Compressed air, filtered and non-lubricated recommended
PRA/182000/IIL PRA/182000/MIL Cylinder barrel turned at 90° for use with guide blocksQA/8000/51 and QA/8000/61
• • • • PRA/182000/IU • • • • PRA/182000/MU Cylinder with extended piston rod 6• • PRA/182000/W5 • • PRA/182000/W6 Cylinder with extended piston rod and special wiper/seal
(suitable for applications with cement, plaster (stucco), 6arizona sand, hoar-frost or ice)
• • • PRA/182000/G • • • PRA/182000/MG Cylinder with piston rod bellows 8
• • • PRA/182000/W • • • PRA/182000/MW Cylinder without cushioning 6• • PRA/182000/X3 • • PRA/182000/X4 Low friction cylinders without cushioning, 6
operating pressure: 1 to 10 bar Medium: Compressed air,filtered and non-lubricated recommended
• • • • PRA/182000/J • • • • PRA/182000/JM Cylinder with double ended piston rod 7• • PRA/182000/W3 • • PRA/182000/W4 Cylinder with double ended piston rod and special
wiper/seal (suitable for applications with cement, 7plaster (stucco), arizona sand, hoar-frost or ice)
• PRA/182000/IT • PRA/182000/MT Four position cylinders 7
PRA/182000/N1 PRA/182000/N2 Cylinder with non-rotating piston rod, Ø 32 to 100 mm 7
• • PRA/182000/L2 • • PRA/182000/L4 Cylinder with locking unit (passive) 8spring force on removal of the signal to the unit. Operating pressure for locking unit: 4 to 10 bar
WarningThese products are intended for use in industrial compressed air sys-tems only. Do not use these products where pressures and tempera-tures can exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applica-tions not within published specifications, consult NORGREN.
Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes.
The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide ade-quate safeguards to prevent personal injury or damage to equipmentin the event of such failure.System designers must provide a warning to end users in the system instructional manual if protection against a failuremode cannot be adequately provided.System designers and end users are cautioned to review specificwarnings found in instruction sheets packed and shipped with these products.
3N/en 1.5.135.03
®®
10/09 Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this document.
PRA/182000, PRA/182000/M
Options selector ˙P˙A/182˙˙˙/˙˙˙/˙˙˙˙
Strokes (mm)3000 max.
Variants (non-magnetic piston) SubstituteStandard OhneSpecial wiper/seal W1Low friction X1Piston rod bellow GWithout cushion WWithout cushion, low fiction X3Double ended piston rod JDouble ended piston rodspecial wiper/seal W3Four-positon cylinder ITNon-rotating piston rod (internal) N1Locking unit (passive) L2Barrel turned at 90° (for use withguideblocks QA/8000/51 and .../61) IILExtended piston rod IUExtended piston rod, special wiper/seal W5P*A/182***/IU/****/***
/W5/ Extension (mm)
Non-standard variants SubstituteHigh temperature version: 150°C max. THydraulic (Ø 32 to 100 mm) H
Piston rod material SubstituteStainless steel martensitic RHard chromium plated CStainless steel austenitic S
Cylinder Ø Substitute032, 040, 050, 063, 080, 100, 125
Variants (magnetic piston) SubstituteStandard MSpecial wiper/seal W2Low fiction X2Piston rod bellow MGWithout cushion MWWithout cushion, low fiction X4Double ended piston rod JMDouble ended piston rodspecial wiper/seal W4Four-positon cylinder MTNon-rotating piston rod (internal) N2Locking unit (passive) L4Barrel turned at 90° (for use withguideblocks QA/8000/51 and .../61) MILExtended piston rod MUExtended piston rod,special wiper/seal W6P*A/182***/MU/****/***
/W6/Extension (mm)
Note: If option is not required, disregard option position withinpart number eg. RA/192100/M/100. For combinations ofcylinder variants consult our technical service. Please notethat heat resistant seals are not available for all variants.This options selector explains only the cylinder variants. Additional variants/options are not possible.
Standard strokesCylinder Standard strokes (mm)Ø 25 50 80 100 125 160 200 250 320 400 500
32 • • • • • • • • • • •40 • • • • • • • • • • •50 • • • • • • • • • • •63 • • • • • • • • • • •80 • • • • • • • • • • •100 • • • • • • • • • • •125 • • • • • • • • • • •
Ordering example
CylinderPneumatic cylinder Ø 80 mm, magnetic piston, stroke 50 mm Quote: PRA/182080/M/50
SwitchesMagnetically operated switch, reed, LED, cable length 2 mQuote: M/50/LSU/2V
MountingsFront flange style G, for cylinder Ø 80 mm Quote: QA/8080/22
4
1
11
11
12
14
13
15
16
17
18
19
10
23
4
5
7
6
9
8
10/09
®®
N/en 1.5.135.04
PRA/182000, PRA/182000/M
Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this document.
Style A AK B, G C D D2 F FH R
Ø Page 9 Page 9 Page 9 Page 9 Page 9 Page 9 Page 10 Page 10 Page 1032 QM/8032/35 QM/8025/38 QA/8032/22 QA/8032/21 QA/8032/23 QA/8032/42 QM/8025/25 QA/8032/34 QA/8032/2740 QM/8032/35 QM/8040/38 QA/8040/22 QA/8040/21 QA/8040/23 QA/8040/42 QM/8040/25 QA/8040/34 QA/8040/2750 QM/8050/35 QM/8050/38 QA/8050/22 QA/8050/21 QA/8050/23 QA/8050/42 QM/8050/25 QA/8050/34 QA/8050/2763 QM/8050/35 QM/8050/38 QA/8063/22 QA/8063/21 QA/8063/23 QA/8063/42 QM/8050/25 QA/8063/34 QA/8063/2780 QM/8080/35 QM/8080/38 QA/8080/22 QA/8080/21 QA/8080/23 QA/8080/42 QM/8080/25 QA/8080/34 QA/8080/27100 QM/8080/35 QM/8080/38 QA/8100/22 QA/8100/21 QA/8100/23 QA/8100/42 QM/8080/25 QA/8100/34 QA/8100/27125 QM/8125/35 QM/8125/38 QM/8125/22 QM/8125/21 QM/8125/23 QA/8125/42 QM/8125/25 QA/8125/34 QM/8125/27Style S SS SW UF UH UR US Groove key Groove cover
Ø Page 11 Page 11 Page 11 Page 10 Page 10 Page 10 Page 11 Page 14 Page 1232 QA/8032/41 M/P19931 M/P19493 QM/8025/32 PQA/182032/40 QA/8032/33 M/P40310 M/P72816 M/K72725/100040 QA/8040/41 M/P19932 M/P19494 QM/8040/32 PQA/182040/40 QA/8040/33 M/P40311 M/P72816 M/K72725/100050 QA/8040/41 M/P19933 M/P19495 QM/8050/32 PQA/182050/40 QA/8050/33 M/P40312 M/P72816 M/K72725/100063 QA/8063/41 M/P19934 M/P19496 QM/8050/32 PQA/182063/40 QA/8063/33 M/P40313 M/P72816 M/K72725/100080 QA/8063/41 M/P19935 M/P19497 QM/8080/32 PQA/182080/40 QA/8080/33 M/P40314 M/P72816 M/K72725/1000100 QA/8100/41 M/P19936 M/P19498 QM/8080/32 PQA/182100/40 QA/8100/33 M/P40315 M/P72816 M/K72725/1000125 QA/8100/41 M/P19937 M/P19499 QM/8125/32 PQA/182125/40 QM/8125/33 M/P71355 M/P72816 M/K72725/1000
Valve mounting kit Guide block
Ø Page 11 Data sheet 1.10.02132 –40 –50 QA/180050/22/5463 QA/180050/22/5480 QA/180080/22/54100 QA/180080/22/54125 QA/180080/22/54
1913
1484111761612
391575211810
Mountings
5N/en 1.5.135.05
®®
10/09 Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this document.
PRA/182000, PRA/182000/M
Theoretical forces, cushion, air consumptionType Cylinder Theoretical forces (N) at 6 bar Cushion length Initial cushion Air consumption (l/cm stroke) at 6 bar
Ø outstroke instroke (mm) volume (cm3) outstroke instrokePRA/182032/. 32 482 414 19 12,3 0,056 0,048PRA/182040/. 40 754 633 22 20,7 0,088 0,074PRA/182050/. 50 1178 990 24 36 0,137 0,114PRA/182063/. 63 1870 1680 24 64 0,218 0,195PRA/182080/. 80 3016 2722 27 116 0,35 0,32PRA/182100/. 100 4710 4416 34 242 0,55 0,51PRA/182125/. 125 7363 6882 41 451 0,86 0,79
With cable With connector (M8x1)
Cable/Type Voltage Current Temperature LED Features Connector Cable Cable withReed Solid state V a.c. V d.c. max. °C length type Connector DatasheetM/50/LSU/*V – 10 to 240 10 to 170 180 mA -20 to +80 • – 2, 5, 10 m PVC 2 x 0,25 – N/en 4.3.005M/50/LSU/5U – 10 to 240 10 to 170 180 mA -20 to +80 • – 5 m PUR 2 x 0,25 – N/en 4.3.005TM/50/RAU/2S – 10 to 240 10 to 170 180 mA -20 to +150 – – 2 m Silicone 2 x 0,25 – N/en 4.3.005M/50/RAC/5V – 10 to 240 10 to 170 180 mA -20 to +80 – Changeover 5 m PVC 3 x 0,25 – N/en 4.3.005M/50/LSU/CP – 10 to 60 10 to 75 180 mA -20 to +80 • Plug M8x1 5 m PVC 3 x 0,25 M/P73001/5 N/en 4.3.005– M/50/EAP/*V – 10 to 30 150 mA -20 to +80 • PNP 2, 5, 10 m PVC 3 x 0,25 – N/en 4.3.007– M/50/EAP/CP – 10 to 30 150 mA -20 to +80 • PNP, Plug M8x1 5 m PVC 3 x 0,25 M/P73001/5 N/en 4.3.007– M/50/EAP/CC – 10 to 30 150 mA -20 to +80 • PNP, Plug M12x1 5 m PVC 3 x 0,25 M/P34614/5 N/en 4.3.007– M/50/EAN/*V – 10 to 30 150 mA -20 to +80 • NPN 2, 5, 10 m PVC 3 x 0,25 – N/en 4.3.007– M/50/EAN/CP – 10 to 30 150 mA -20 to +80 • NPN, Plug M8x1 5 m PVC 3 x 0,25 M/P73001/5 N/en 4.3.007
Switches
* Please insert cable length Further information (technical data, cable material, dimensions) see datasheet.
6
ER
BH
L8 + #GGL 2
VD PLEEL 12
KWAM
KK
ø B
e 11
L 9BG
RT
ø B
A e
11
BH
A
B
VA
MM
h 9
ø 80 ... 125 mm
WH
AP
A - B
EEPL
KV SW
1
BGR
T
2
10/09
®®
N/en 1.5.135.06
PRA/182000, PRA/182000/M
Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this document.
Basic dimensions
PRA/182000, PRA/182000/M – Standard cylinder
Type Ø AM AP Ø Be 11 Ø BAe 11 BG BH � E EE G KK KV KW L2 PRA/182032/. 32 22 3,5 30 30 16 6 47 G 1/8 27,5 M10x1,25 17 5 20PRA/182040/. 40 24 4,5 35 35 16 6 53 G 1/4 32 M12x1,25 19 6 22PRA/182050/. 50 32 6 40 40 16 8 65 G 1/4 31 M16x1,5 24 8 27PRA/182063/. 63 32 10 45 45 16 8 75 G 3/8 33 M16x1,5 24 8 29PRA/182080/. 80 40 8,5 45 45 17 19 95 G 3/8 33 M20x1,5 30 10 33PRA/182100/. 100 40 9 55 55 17 19 115 G 1/2 37 M20x1,5 30 10 36PRA/182125/. 125 54 10 60 60 20 24 140 G 1/2 46 M27x2 41 13,5 45Type Ø L8 L9 L12 Ø MMh 9 PL � R RT SW VA VD WH at 0 mm per 25 mmPRA/182032/. 32 94 4 6 12 13 32,5 M 6 10 3 6 26 0,51 kg 0,06 kgPRA/182040/. 40 105 4 6,5 16 15 38 M 6 13 3,5 6 30 0,80 kg 0,08 kgPRA/182050/. 50 106 5 8 20 18,5 46,5 M 8 17 3,5 6 37 1,33 kg 0,12 kgPRA/182063/. 63 121 5 8 20 19 56,5 M 8 17 4 6 37 1,80 kg 0,13 kgPRA/182080/. 80 128 – 10 25 19 72 M 10 22 4 6 46 3,25 kg 0,20 kgPRA/182100/. 100 138 – 10 25 18 89 M 10 22 4 6 51 4,81 kg 0,23 kgPRA/182125/. 125 160 – 13 32 20 110 M 12 27 6 15,5 65 8,00 kg 0,33 kg
1
# stroke
cushion screw
2 M/50 switches can be mounted flush with the profile
7N/en 1.5.135.07
®®
10/09 Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this document.
PRA/182000, PRA/182000/M
Alternative variantsPRA/182000/J, PRA/182000/JM – Cylinder with double ended piston rod
PRA/182000/IT, PRA/182000/MT – Four-position cylinder
PRA/182000/N1, PRA/182000/N2 – Cylinder with non-rotating piston rod
Type Ø ZM L8PRA/182032/J. 32 146 94PRA/182040/J. 40 165 105PRA/182050/J. 50 180 106PRA/182063/J. 63 195 121PRA/182080/J. 80 220 128PRA/182100/J. 100 240 138PRA/182125/J. 125 290 160
Type Ø L 8 L 10 L 11PRA/182032/.T 32 94 247 7PRA/182040/.T 40 105 278 8PRA/182050/.T 50 106 294 8PRA/182063/.T 63 121 325 9PRA/182080/.T 80 128 357 9PRA/182100/.T 100 138 387 9PRA/182125/.T 125 160 462 12
# stroke
Type Ø Max. torque(Nm)
PRA/182032/N. 32 10 0,5PRA/182040/N. 40 13 1,0PRA/182050/N. 50 16 1,5PRA/182063/N. 63 16 1,5PRA/182080/N. 80 16 2,5PRA/182100/N. 100 21 2,5
L 10 + #1 + #2L11L 8 + #1 L 8 + #2
A - BA
B
ZM + 2 x #L 8 + #
810/09
®®
N/en 1.5.135.08
PRA/182000, PRA/182000/M
Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this document.
PRA/182000/L2, PRA/182000/L4 – Cylinder with locking unit (passive)
Type Ø AB AD AE AF AG AH Ø AJ AK AL AM ANPRA/182032/L./. 32 32 12 8 40 4,2 48 25 M 5 16 59 8PRA/182040/L./. 40 35,5 12 10 46 4,5 55 24 M 5 21 61,5 10PRA/182050/L./. 50 49 16 15 54 11,5 70 30 M 6 24 75 12PRA/182063/L./. 63 49 15 15 55 7,5 70 38 M 8 32 86 12PRA/182080/L./. 80 62 16 16 70 10 90 53 M 8 44 119 16PRA/182100/L./. 100 65 18 16 70 10 92 48 M 8 60 119 16PRA/182125/L./. 125 85 27 25 95 11 122 65 M 10 75 140 20Type Ø Ø B e11 E E 1 EE L 8 � R RT VD WH Locking forcePRA/182032/L./. 32 30 48 50 M 5 94 32,5 M 6 10 16 600 NPRA/182040/L./. 40 35 56 58 G 1/8 105 38 M 6 10 18 1000 NPRA/182050/L./. 50 40 68 70 G 1/8 106 46,5 M 8 12 22 1500 NPRA/182063/L./. 63 45 82 85 G 1/8 121 56,5 M 8 12 20 2200 NPRA/182080/L./. 80 45 100 105 G 1/8 128 72 M 10 20 33 5000 NPRA/182100/L./. 100 55 120 130 G 1/8 138 89 M 10 23 38 5000 NPRA/182125/L./. 125 60 140 150 G 1/8 160 110 M 12 32 65 7000 N
PRA/182000/G, PRA/182000/MG – Piston rod bellow
Type Ø Ø A Max. Piston rodstroke extension Bper for forbellow first further
bellow bellowPRA/182032/.G 32 40 60 30 25PRA/182040/.G 40 63 145 50 32PRA/182050/.G 50 63 145 40 32PRA/182063/.G 63 63 145 40 32PRA/182080/.G 80 80 250 50 45PRA/182100/.G 100 80 250 50 45PRA/182125/.G 125 80 250 50 45
# stroke
EE
AM
L 8 + #AB
AN
VD
WH AH
AD
AF
AE
AGR
T
RE
AK
AL
Ø AJ
E1
ø B
e 11
øA
B
9
BB
DD TG
TG
B 1
L 2
L
F
KK
4°4°
KK
3 2 4 1
UF
TF
FB
RE
MF
AOAUA
T AH
ø AB
TR
E
LH
CB H 14
UB
L
FL
MR
EK
f 8
FL
R1
R2
B3
EK
h 9
B2
B1 H 14
N/en 1.5.135.09
®®
10/09 Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this document.
PRA/182000, PRA/182000/M
Mountings
Style (A) Ø BB DD TG kgQM/8032/35 32/40 17 M6 32,5/38 0,02QM/8050/35 50/63 23 M8 46,5/56,5 0,05QM/8080/35 80/100 28 M10 72/89 0,08QM/8125/35 125 34 M12 110 0,14
Front or rear stud mounting AConforms to ISO 15552, type MX1
Style (AK) Ø KK B1 F L L2 1 2 3 4 kgQM/8025/38 32 M10x1,25 5 26 73 20 19 12 17 30 0,20QM/8040/38 40 M12x1,25 6 26 77 24 19 12 19 30 0,20QM/8050/38 50/63 M16x1,5 8 34 106 32 30 19 24 42 0,65QM/8080/38 80/100 M20x1,5 10 42 122 40 30 19 30 42 0,72QM/8125/38 125 M27x2 13,5 40 147 54 40 24 41 55 1,70
Piston rod swivel AK
Rear flange BFront flange GConforms to ISO 15552, type MF1 and MF2
Style (B - G) Ø E Ø FB MF R TF UF kgQA/8032/22 32 50 7 10 32 64 80 0,25QA/8040/22 40 55 9 10 36 72 90 0,35QA/8050/22 50 65 9 12 45 90 110 0,70QA/8063/22 63 75 9 12 50 100 125 0,80QA/8080/22 80 100 12 16 63 126 154 1,35QA/8100/22 100 120 14 16 75 150 186 2,20QM/8125/22 125 140 16 20 90 180 224 2,70
Foot mounting CConforms to ISO 15552, type MS1
Style (C) Ø Ø AB AH AO AT AU E TR kgQA/8032/21 32 7 32 8 4 24 48 32 0,15QA/8040/21 40 9 386 9 4 28 53 36 0,18QA/8050/21 50 9 45 10 5 32 64 45 0,30QA/8063/21 63 9 50 12 5 32 74 50 0,39QA/8080/21 80 12 63 19 5 41 98 63 0,80QA/8100/21 100 14 71 19 5 41 115 75 0,95QM/8125/21 125 16 90 20 9 45 140 90 2,40
Style (D) Ø CB H14 Ø EK f8 FL L LH MR UB kgQA/8032/23 32 26 10 22 13 52 9 45 0,11QA/8040/23 40 28 12 25 16 60 12 52 0,16QA/8050/23 50 32 12 27 17 68 12 60 0,22QA/8063/23 63 40 16 32 22 79 15 70 0,34QA/8080/23 80 50 16 36 22 99 15 90 0,54QA/8100/23 100 60 20 41 27 119 20 110 0,90QM/8125/23 125 70 25 50 31 139 25 130 2,70
Rear clevis DConforms to ISO 15552, type MP2
Style (D2) Ø B1 H14 B2 B3 Ø EK h9 FL R1 R2 kgQA/8032/42 32 14 34 3,3 10 22 11 17 0,20QA/8040/42 40 16 40 4,3 12 25 12 20 0,23QA/8050/42 50 21 45 4,3 16 27 14,5 22 0,36QA/8063/42 63 21 51 4,3 16 32 18 25 0,55QA/8080/42 80 25 65 4,3 20 36 22 30 0,90QA/8100/42 100 25 75 4,3 20 41 22 32 1,45QA/8125/42 125 37 97 6,3 30 50 30 42 2,70
Rear clevis D2Conforms ISO 15552, type AB6
10
L TM h 14TL
ø T
D e
9
UW
R
8
CELE
CL
ER
KK
ø C
K h1
1
RKCLCM
TM h14TL
UW
1
R
TD
e 9
L 1
D H11
EW
FL
L
CD
H 9
MR
EN -0,1
ZZ
CE
CN H 7
LE AXER
KK
EN
ZZ
FL
ER
R
CN
H 7
10/09
®®
N/en 1.5.135.10
PRA/182000, PRA/182000/M
Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this document.
Adjustable trunnion mounting UHConforms to ISO 15552, type MT4
Style (UH) Ø L R Ø TD e9 TL TM h14 UW Torque kgmax. (Nm)
PQA/182032/40 32 25 1 12 12 50 58 2,0 0,16PQA/182040/40 40 28 1,6 16 16 63 65 3,5 0,35PQA/182050/40 50 28 1,6 16 16 75 80 3,5 0,65PQA/182063/40 63 36 1,6 20 20 90 96 5,0 0,85PQA/182080/40 80 36 1,6 20 20 110 116 6,0 1,20PQA/182100/40 100 48 2 25 25 132 140 6,0 2,30PQA/182125/40 125 48 2 25 25 160 163 6,0 3,30
8 locking screw
Note: style ‘UH’: It is most important that the locking screws which secure the mounting to the cylinder barrel are tightened to the torque figures shown in the table below. For maximum energy input, consult our Technical Service.
Piston rod clevis FConforms to DIN ISO 8140
Style (F) Ø KK CE Ø CKh11 CL CM ER LE RK kgQM/8025/25 32 M10x1,25 40 10 20 10 16 20 28 0,09QM/8040/25 40 M12x1,25 48 12 24 12 19 24 32 0,13QM/8050/25 50/63 M16x1,5 64 16 32 16 25 32 41,5 0,33QM/8080/25 80/100 M20x1,5 80 20 40 20 32 40 50 0,67QM/8125/25 125 M27x2 110 30 55 30 45 54 62 1,35
Style (FH) Ø Ø Dh11 L1 R Ø TDe9 TL TMh14 UW1 kgQA/8032/34 32 30 16 1 12 12 50 50 0,20QA/8040/34 40 35 20 1,6 16 16 63 55 0,38QA/8050/34 50 40 24 1,6 16 16 75 65 0,60QA/8063/34 63 45 24 1,6 20 20 90 75 1,10QA/8080/34 80 45 28 1,6 20 20 110 100 1,90QA/8100/34 100 55 38 2 25 25 132 120 3,50QA/8125/34 125 60 50 2 25 25 160 145 6,50
Front or rear detachable trunnion FHConforms to VDMA 24562 part 2, type MT 5/6
Rear eye RConforms to ISO 15552, type MP4
Style (R) Ø Ø CDH9 EW FL L MR kgQA/8032/27 32 10 25,8 22 13 9 0,09QA/8040/27 40 12 27,8 25 16 12 0,11QA/8050/27 50 12 31,7 27 17 12 0,17QA/8063/27 63 16 39,7 32 22 15 0,24QA/8080/27 80 16 49,7 36 22 15 0,37QA/8100/27 100 20 59,7 41 27 20 0,59QA/8125/27 125 25 69,7 50 33 25 3,20
Style (UF) Ø Thread AX CE Ø EN-0,1 ER LE Z kgKK CNH7
QM/8025/32 32 M10x1,25 20 43 10 14 14 15 13° 0,09QM/8040/32 40 M12x1,25 22 50 12 16 16 17 13° 0,13QM/8050/32 50/63 M16x1,5 28 64 16 21 21 22 15° 0,33QM/8080/32 80/100 M20x1,5 33 77 20 25 25 26 15° 0,67QM/8125/32 125 M27x2 51 110 30 37 35 36 15° 1,35
Style (UR) Ø Ø CNH7 EN ER FL R Z kgQA/8032/33 32 10 14 16 22 14,5 13° 0,15QA/8040/33 40 12 16 19 25 18 13° 0,25QA/8050/33 50 16 21 21 27 19 13° 0,40QA/8063/33 63 16 21 24 32 24 15° 0,55QA/8080/33 80 20 25 28 36 24 15° 0,90QA/8100/33 100 20 25 30 41 29 15° 1,50QM/8125/33 125 30 37 40 50 36 15° 2,70
Universal piston rod eye UFConforms to DIN ISO 8139
Universal rear mounting URConforms ISO 15552, type MP6
11
B
C
C
D
D
A E
J
ø D 3
T 1
H 2
ø D 2A
B 1B 2
H 1 ø
D 1
C
F x 45°
H7
K 1
K 2
ø S
ø D
L 1
G 2
G 3
ER
CH
H 2
G 1EU
ZZ
ø C
N H
7
EN -0,1
EM
K 1
K 2
ø S
ø D
L 1
ø C
N G
7
G 2
G 3
G 1
R
CA
H 2
EM
K 1
K 2
ø S
ø D
L 1
ø C
K H
9
G 2
G 3
G 1
R
CA
H 2
N/en 1.5.135.11
®®
10/09 Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this document.
PRA/182000, PRA/182000/M
Valve mounting kit
Type Ø A B C D E F G H J kgQA/180050/22/54 50/63 60 37 7 4,5 46 8,5 5,5 2 12 3 0,02QA/180080/22/54 80/100/125 90 37 7 4,5 76 8,5 6,5 2 12 3 0,02
Type (S) Ø A B1 B2 C Ø Ø Ø Fx 45° H1 H2 T1 kgD1H7 D2 D3
QA/8032/41 32 32 46 18 10,5 12 6,6 11 1 30 15 6,8 0,10QA/8040/41 40/50 36 55 21 12 16 9 15 1,6 36 18 9 0,14QA/8063/41 63/80 42 65 23 13 20 11 18 1,6 40 20 11 0,18QA/8100/41 100/125 50 75 28,5 16 25 14 20 2 50 25 13 0,34
Swivel bearing SConforms ISO 15552, type AT4
Typ (US) Ø CH Ø Ø EN-0,1 ER EU G1 G2 G3 H2 K1 K2 L1 Ø Z kgCNH7 D S
M/P40310 32 32 10 11 14 16 10,5 21 18 31 8 38 51 1,6 6,6 13° 0,19M/P40311 40 36 12 11 16 19 12 24 22 35 10 41 54 1,6 6,6 13° 0,24M/P40312 50 45 16 15 21 21 15 33 30 45 12 50 65 1,6 9 13° 0,46M/P40313 63 50 16 15 21 24 15 37 35 50 12 52 67 1,6 9 15° 0,59M/P40314 80 63 20 18 25 28 18 47 40 60 14 66 86 2,5 11 15° 1,03M/P40315 100 71 20 18 25 30 18 55 50 70 15 76 96 2,5 11 15° 1,40M/P71355 125 90 30 20 37 40 25 70 60 90 20 94 1243,2 14 15° 3,10
Swivel hinge USConforms to VDMA 24562 part 2
Typ (SS) Ø CA Ø Ø H2 EM G1 G2 G3 K1 K2 L1 R Ø kgCNG7 D S
M/P19931 32 32 10 11 8 10 21 18 31 38 51 1,6 10 6,6 0,15M/P19932 40 36 12 11 10 12 24 22 35 41 54 1,6 11 6,6 0,20M/P19933 50 45 10 15 12 16 33 30 45 50 65 1,6 13 9 0,48M/P19934 63 50 16 15 12 16 37 35 50 52 67 1,6 15 9 0,50M/P19935 80 63 20 18 14 20 47 40 60 66 86 2,5 15 11 0,75M/P19936 100 71 20 18 15 20 55 50 70 76 96 2,5 19 11 1,20M/P19937 125 90 25 20 20 30 70 60 90 94 124 3,2 22 14 2,50
Narrow hinge SS
Typ (SW) Ø CA Ø Ø H2 EM G1 G2 G3 K1 K2 L1 R Ø kgCKH9 D S
M/P19493 32 32 10 11 8 26,5 21 18 31 38 51 1,6 10 6,6 0,05M/P19494 40 36 12 11 10 28,5 24 22 35 41 54 1,6 11 6,6 0,07M/P19495 50 45 12 15 12 32,5 33 30 45 50 65 1,6 13 9 0,14M/P19496 63 50 16 15 12 40,5 37 35 50 52 67 1,6 15 9 0,18M/P19497 80 63 16 18 14 50,5 47 40 60 66 86 2,5 15 11 0,28M/P19498 100 71 20 18 15 60,5 55 50 70 76 96 2,5 19 11 0,42M/P19499 125 90 25 20 20 70,5 70 60 90 94 124 3,2 22 14 2,70
Wide hinge SWConforms to ISO 15552, type AB7
12
X15M 4 4
X
2 6 11 10 526
X
6,8
5,2
0,8
X
10/09
®®
N/en 1.5.135.12
PRA/182000, PRA/182000/M
Our policy is one of continued research and development. We therefore reserve the right to amend,without notice, the specifications given in this document.
Groove key M/P72816Weight: 0,010 kg
Spares
* Insert stroke lengthNote: please quote the cylinder type number when ordering spares kits and piston rods!
Cylinder Type Spares kit ComprisingØ Item Description Quantity32 PRA/182032 QA/8032/0032 PRA/182032/M QA/8032/0040 PRA/182040, PRA/182040/M QA/8040/0050 PRA/182050, PRA/182050/M QA/8050/0063 PRA/182063, PRA/182063/M QA/8063/0080 PRA/182080, PRA/182080/M QA/8080/00100 PRA/182100, PRA/182100/M QA/8100/00125 PRA/182125, PRA/182125/M QA/8125/00
Groove cover M/K72725/1000
2 Piston rod seal 15 Cushion seal 26 O-ring 210 Piston seal 211 Wear ring 126 O-ring 1
(Ø 32 to 100 mm)