+12v Constant = Orange +12v Acc. Switch = Yellow -12v Chassis Ground= Black/White +12v Illumination = Gray +12v Dimmer = BrownAntenna/Amp Remote = GM-Lan = Drk. Green & Lt. Green
LF+ = TanLF- = Gray
RF+ = Lt. Green RF- = Drk. Green LR+ = Brown LR- = Yellow RR+ = Drk. Blue RR- = Lt. Blue
Dash Type: Double DinAftermarket: Single/Double DinKit: GM1587B/GM1599BAntenna Adapter: CRAB/CRARB
About the Vehicle
Make: SaturnModel: IonYear: 2006-07
In Dash Application
Wire Color Codes
Speaker Notes
Front Speaker Sizes
Rear
Saturn Ion
NOTES
Lower Door : 6.5'' MidrangeSpeaker Adapter: SAC656/SAU56Speaker Harness: TBA
Dimensions:
Dimensions: W= 5 1/2'' L= 5 1/2''D=
NOTES
Standard/OptionalCD PlayerOnStarMP3 Compatible
W= 5 1/2'' L= 5 1/2''D= 2 1/8''
Type: Standard System Location: At Speakers
Speaker Sizes
When installing aftermarket 5 ¼" or 6 ½" a speaker adapter is needed.
Rear Deck : 6.5'' MidrangeSpeaker Harness: TBA
When installing aftermarket 5 ¼" or 6 ½" a speaker adapter is needed.
2006-07
Saturn Ion
Images
Front Speakers
Radio removal
Front Speakers
Rear Speakers
1. Using a panel removal tool remove the trimaround the shifter.2. Using a PRT remove the top panel of the centerconsol that surrounds the shifter and cup holders.3. Using a PRT remove the front dash panel thatsurrounds the radio and top A/C vents. Disconnectand remove. (WARNING: DON'T TURN ON THEIGNITIONWITH THE PASSENGER AIR BAG LIGHT PLUGDISCONNECTED.THISWILL FLAG AN AIR BAG LIGHT CODE).4. Extract (4) 9/32" bolts securing the radio to the dash. Disconnect and remove.
Radio
Recommended: Disconnect negative battery cable
Door Speakers
Rear Deck Speakers1. Open the trunk to access the rear seat foldinglocks. Pull the locks to fold down the rear seats.2. Using PRT remove (4) panel fasteners that runalong the front of the rear deck.3. Using PRT remove (2) panel fasteners on top of the rear deck.4. Using a small hook tool remove the screw coveron each "C" pillar. Extract (1) 9/32" bolt under each cover. Remove each "C" pillar.5. Lift entire rear deck up and out to remove reardeck.6. Extract (2) 9/32" bolts securing speaker to reardeck. Disconnect and remove.
Rear Speakers
1. Using a PRT remove the side mirror trim panel.2. Using a crank removal tool remove the windowcrank.3. Extract (1) PHS from the arm rest pocket.4. Remove (2) panel fasteners from the rear of the door panel.5. Extract (1) PHS from the front lower portion of the door just below the front of the speaker grill.6. Using a PRT remove the door panel.7. Extract (4) 9/32" bolts securing the speaker tothe door steel. Disconnect and remove.
2006-07