www.intertec.info
INTERTEC-Hess GmbH · Raffineriestr. 8 · 93333 Neustadt/Donau · Germany · +49 9445 9532-0 · [email protected]
19” Swing Frame for protective cabinet
Sd732-2e-19” Swing Frame for protective cabinet Page 1/ 4
1 Application
Fitting 19” rack mounted instruments into INTERTEC cabinets and houses
2 Description
The integrated swing frame allows 19” racks to be used with all the advantages of INTERTEC protective cabinets, e.g.: Efficient insulation which prevents condensation and
temperature variation A high degree of dust and water protection for sensitive
instruments is possible up to IP 65 Double glazed windows in acrylic or safety glass
installed at frame height Complete system of accessories
3 Advantages
Exceptionally variable construction system Nearly all special requests can be incorporated No separate framework is needed, as it is integrated
into the existing mounting rail system. Corrosion-resistant 19” swing frame fabricated of bright
Stainless steel Intermediate sizes, special heights and widths are
available
4 Features
19” construction system acc. IEC 60297 (DIN 41 494) Low distortion, welded construction Infinitely variable in height Locked by double spade bit style key and lock
5 Options
The tables on pages 2 to 4 show the most common versions. Where possible the standard arrangement is centred and an offset arrangement is shown in the plan view next to it. The dimensions D, X and Y can be selected within certain limits, and the maximum available depth E is dependent upon them.
Special designs available on request Number of units to your specification:
up to 1000 mm a maximum of 16 units are possible, up to 1250 mm a maximum of 21 units are possible, up to 1500 mm a maximum of 26 units are possible, up to 1750 mm a maximum of 31 units are possible, up to 2000 mm a maximum of 39 units are possible.
Side covers (shown in the diagram in maximum width, dimensions X and Y)
Hinged left or right. Painted grey RAL 7032 Also available as metrical construction system to
IEC 60917
BASIC CLASSIC
Detail W
www.intertec.info
INTERTEC-Hess GmbH · Raffineriestr. 8 · 93333 Neustadt/Donau · Germany · +49 9445 9532-0 · [email protected]
19” Swing Frame for protective cabinet
Sd732-2e-19” Swing Frame for protective cabinet Page 2/ 4
6 Overview of Arrangements
I. Twin beam mounting
II. Single beam mounting
III. Twin beam mounting
IV. Single beam mounting
fixed behind door depth adjustable
Installation weight 100kg,
higher loads on request Locking point top and/or
bottom possible
Installation weight in CLASSIC 50 kg, in BASIC 30 kg, higher loads on request.
No restrictions from lower cross-beam
Installation weight 100kg, higher loads on request
Locking point top and/or bottom possible
Installation weight in CLASSIC 50 kg, in BASIC 30 kg, higher loads on request.
No restrictions from lower cross-beam
mounting in BASIC ... in CLASSIC
mounting in BASIC ... in CLASSIC
I. Twin beam mounting, fixed behind door
600
800
X+Y160
1000
X+Y360
1250
Supporting beam
Door
Wall panel
Optionally (reduced installation depth)
www.intertec.info
INTERTEC-Hess GmbH · Raffineriestr. 8 · 93333 Neustadt/Donau · Germany · +49 9445 9532-0 · [email protected]
19“-Swing Frame for protective cabinet
Sd732-2e-19” Swing Frame for protective cabinet Page 3/ 4
II. Single beam mounting, fixed behind door
600
800
1000
1250
III. Twin beam mounting, depth adjustable
600
800
X+Y360
1000
X+Y360
1250
Optionally (reduced installation depth)
Optionally (reduced installation depth)
www.intertec.info
INTERTEC-Hess GmbH · Raffineriestr. 8 · 93333 Neustadt/Donau · Germany · +49 9445 9532-0 · [email protected]
19“-Swing Frame for protective cabinet
Sd732-2e-19” Swing Frame for protective cabinet Page 4/ 4
IV. Single beam mounting, depth adjustable
600
800
1000
1250
7 Swivelling through 180°
e.g. CLASSIC ...080... BASIC and other dimensions on request.
Optionally (reduced installation depth)