1923 Virtual Robot Part 3

By Nihar Sidhu

Power Distribution Board The power distribution board distributes power to all

the other components in a robot.

Closer Look at the Power Distribution Board

It has 12 output pairs for 30 amps (in red) and 12 output pairs for 40 amps (in blue). This means that components on these output pairs can either get max 30 or 40 amps.

Output for Robot Radio (D Link)

Output for cRIO

Output for Axis Camera

Snap Action Circuit Breakers

Snap into the power distribution board. These circuit breakers limit the current that goes to the different components in the robot.

Purpose of Snap Action Circuit Breakers Should more than, for

example, 40 amps, go through the circuit, the circuit breaker will “snap” out and prevent wires from getting overheated and melting.

The circuit breakers will not prevent components from receiving excess current and overheating!