9/26/2010
1
Chapter 14Acids and Bases
Properties of Acids and Bases
Svante Arrhenius(1859-1927)
First to develop a theory for acids and bases in aqueous
solution
Arrhenius AcidsCompounds which dissolve (dissociate) in water to produce H+ ions
Examples:
HCl(aq) → H+(aq) + Cl-(aq)
HNO3(aq) → H+(aq) + NO3-(aq)
Arrhenius BasesIonic compounds which dissolve (dissociate) in water to produce OH-
ions
Examples:
NaOH(aq) → Na+(aq) + OH-(aq)
Ca(OH)2(aq) → Ca2+(aq) + 2OH-(aq)
Arrhenius acids react with Arrhenius bases to form neutral salt solutions
Ammonia can also react with an Arrhenius acid to form a neutral salt solution!
It’s behaving like a base but contains no OH-!
9/26/2010
2
A more sophisticated definition of acids and bases is needed…
The Brønsted-Lowry Model
Brønsted-Lowry AcidsCompounds which donate protons (H+) in aqueous solution
Protons cannot exist on their own in aqueous solution. Instead, they combine with water molecules forming the hydronium ion, H3O+:
HA(aq) + H2O(l) → H3O+(aq) + A-(aq)
Brønsted-Lowry BasesCompounds which accept protons (H+) in aqueous solution. These
protons are typically taken from water molecules forming the hydroxide ion, OH-:
B(aq) + H2O(l) → BH+(aq) + OH-(aq)
9/26/2010
3
Acid-Base EquilibriaWhen an acid (HA) donates H+ to a base (B), the products are A- and BH+:
HA(aq) + B(aq) → A-(aq) + BH+(aq)
Since the products are also an acid and a base, the reverse reaction can occur in which the acid BH+ donates H+ to the base A-:
A-(aq) + BH+(aq) → HA(aq) + B(aq)
We therefore have an equilibrium reaction:
HA(aq) + B(aq) A-(aq) + BH+(aq)
Conjugate Acid-Base PairsTwo substances related by the loss or gain of a single proton, H+
Write the formula and name of the conjugate base for each of the following acids:
a. HCN(aq)
b. NH4+(aq)
c. H2CO3(aq)
d. HSO4-(aq)
e. HClO2(aq)
Write the formula and name of the conjugate acid for each of the following bases:
a. CO32-(aq)
b. SH-(aq)
c. H2PO3-(aq)
d. Br-(aq)
e. NO2-(aq)
Acid Dissociation Constant, Ka
For:
HA(aq) + H2O(l) H3O+(aq) + A-(aq)
Ka = [H3O+][A-]/[HA] = [H+][A-]/[HA]
H+ is normally used to represent the hydrated proton in acid-base reactions rather than H3O+
The size of Ka depends on the strength of the conjugate base, A-, compared to H2O
If A- is a much weaker base than H2O, the equilibrium position will be far to the right (Ka large) with most of the dissolved acid in ionized
form
If A- is a much stronger base than H2O the equilibrium position will be far to the left (Ka small) with most of the dissolved acid in
molecular form
9/26/2010
4
Acid Strength
Determined by the size of the acid dissociation constant, Ka, for the dissociation (ionization) equilibrium:
HA(aq) + H2O(l) H3O+(aq) + A-(aq)
Strong AcidsThe equilibrium position of its dissociation reaction lies far to the
right:
HCl(g) + H2O(l) H3O+(aq) + Cl-(aq)
Ka large
[H3O+] ~ [HA]0
Conjugate base much weaker base than H2O
Strong acids are excellent conductors of electricity since they almost completely dissociate into ions
Weak AcidsThe equilibrium position of its dissociation reaction lies far to the
left:
CH3CO2H(aq) + H2O(l) H3O+(aq) + CH3CO2-(aq)
Ka small
[H3O+] « [HA]0
Conjugate base much stronger base than H2O
Weak acids are poor conductors of electricity since they hardly dissociate and remain mostly in molecular form
9/26/2010
5
The Six Common Strong AcidsHCl(aq): hydrochloric acidHBr(aq): hydrobromic acid
HI(aq): hydroiodic acidHNO3(aq): nitric acid
H2SO4(aq): sulfuric acidHClO4(aq): perchloric acid
You can assume that all the others are weak!
Summary
Types of Acids Strong acids have weak conjugate bases!The conjugate base of a strong acid has a low attraction for protons
It is a much weaker base than water so the water molecule wins the competition for H+ ions:
HCl(g) + H2O(l) H3O+(aq) + Cl-(aq)
HCl is a strong acidCl- is a weak conjugate base
Weak acids have strong conjugate bases!The conjugate base of a weak acid has a high attraction for protons
It is a much stronger base than water so it wins the competition for H+ ions over water:
CH3CO2H(aq) + H2O(l) H3O+(aq) + CH3CO2-(aq)
CH3CO2H is a weak acidCH3CO2
- is a strong conjugate base
Strengths of Acids and Conjugate Bases
9/26/2010
6
Amphoteric SubstancesA substance is referred to as amphoteric if it can as act as both an
acid and a base
Water is most common example!
Water accepts H+ in the presence of a stronger acid:
HF(g) + H2O(l) H3O+(aq) + F-(aq)
Water donates H+ in the presence of a stronger base:
NH3(g) + H2O(l) NH4+(aq) + OH-(aq)
Autoionization of WaterSince water is amphoteric it is possible for it to react with itself
forming a conjugate acid-base pair:
H2O(l) + H2O (l) H3O+(aq) + OH-(aq)
The equilibrium position is far over to the left so only a very tiny amount of H3O+ and OH- exist in pure water at room temperature
Ion-product Constant for Water, Kw
H2O(l) + H2O (l) H3O+(aq) + OH-(aq)
The autoionization of water leads to the equilibrium expression:
Kw = [H3O+][OH-] = [H+][OH-]
where Kw is called the ion-product constant for water
In pure water at 25 ºC, experiments show that:
[H+] = [OH-] = 1.0 x 10-7 M
so
Kw = [H+][OH-] = (1.0 x 10-7)(1.0 x 10-7) = 1.0 x 10-14
Kw is a measure of the strength of water as an acid
9/26/2010
7
Applications of Kw
Since Kw is an equilibrium constant, in any aqueous solution at 25 C, regardless of what it contains, the product of [H+] and [OH-] must
always be equal to 1.0 x 10-14
Therefore:
If [H+] ↑ then [OH-] ↓
and
If [H+] ↓ then [OH-] ↑
so that [H+][OH-] remains equal to 1.0 x 10-14
Neutral, Acidic and Basic Solutions1. [H+] = [OH-] solution is neutral
2. [H+] > [OH-] solution is acidic
3. [OH-] > [H+] solution is basic
Compositions of Acidic, Basic and Neutral Solutions For all solutions at 25 C, regardless of whether they are acid, basic or neutral:
Kw = [H+][OH-] = 1.0 x 10-14 = constant
9/26/2010
8
Calculating Ion Concentrations in WaterIf [H+] or [OH-] is given, Kw can be used to calculate the
corresponding [OH-] or [H+] concentration at 25 C:
Kw = [H+][OH-] = 1.0 x 10-14
Since Kw is an equilibrium constant, it varies with temperature and so a different value of Kw has to be used if the temperature is not 25 C
The pH ScalepH is a number representing the [H+] concentration in a solution:
Acidic SolutionpH < 7 [H+] > 1.0 x 10-7 MNeutral SolutionpH = 7 [H+] = 1.0 x 10-7 MBasic SolutionpH > 7 [H+] < 1.0 x 10-7 M
Examples of pH values
Measuring pH
pH meter Litmus paper Indicators
9/26/2010
9
Calculating pHThe pH of a solution can be calculated if the [H+] concentration is
known from the following formula:
pH = -log[H+]
It is a logarithmic scale in which a pH change of 1 corresponds to a factor of 10 change in [H+] concentration
When calculating pH values we need to remember that the number of decimal places in the pH is equal to the number of
significant figures in the concentration
Example:
[H+] = 1.00 x 10-8 M (3 sf)
pH = -log[H+] = -log(1.00 x 10-8) = 8.000 (3 dp)
Other logarithmic scales:
pOH= -log[OH-]
pK = -log K
Relationship between pH and pOH Scales
Calculating [H+] from pHpH = -log[H+]
[H+] = antilog(-pH) = 10-pH
When calculating [H+] from pH values we need to remember that the number of decimal places in the pH value becomes the number of significant figures in the [H+] concentration. Its just the opposite of
calculating pH from [H+]
Example:
pH = 3.45 (2 dp)
[H+] = 10-pH = 10-3.45 = 3.5 x 10-4 M (2 sf)
9/26/2010
10
Solving Acid-Base Problems
Although acid-base problems vary greatly in complexity, the first things to do for any problem are always to:
1. Write the major species in solution2. Write balanced equations for reactions forming H+
3. Find the species that forms the most H+
Major Species in Solution
Solution components which are present in the largest amounts
Used to determine which components are important and which can be ignored
The first and most important step in solving acid-base (or any aqueous solution) problems!
Composition Major SpeciesPure Water H2OStrong Acid H+, A-, H2OWeak Acid HA, H2O
What are the major species present in 1.0 M solutions of the following:
a. hydrosulfuric acidb. perchloric acid
c. permanganic acidd. hydroiodic acide. sodium chloride
Calculating the pH of Strong Acid Solutions
The major species in solution are: H+, A- and H2O (HA and OH- are present in negligible amounts)
The acid-base equilibria present in a strong acid solution are:
HA(aq) H+(aq) + A-(aq) Ka very large
H2O(l) H+(aq) + OH-(aq) Kw very small
The large amount of H+ from the strong acid will shift the second equilibrium even further to the left so the tiny amount of H+ coming
from the autoionization of water can be safely ignored
The only important source of H+ therefore comes from the strong acid, and assuming [H+] ~ [HA]0, we can calculate the pH of the
solution
9/26/2010
11
Calculating the pH of Weak Acid Solutions
The major species in solution are: HA and H2O
The acid-base equilibria present in a weak acid solution are:
HA(aq) H+(aq) + A-(aq) Ka small
H2O(l) H+(aq) + OH-(aq) Kw very small
The most important source of H+ normally comes from the weak acid, allowing us to calculate [H+] and hence the pH of the solution using
the same method as used in Chapter 13 for systems with small equilibrium constants
Procedure Calculating the pH of Weak Acid Solutions
9/26/2010
12
Calculating the pH of a Mixture of Weak Acids
If one of the weak acids is much stronger than the other (Ka1 » Ka2) then we can assume that the dominant source of H+ will be from the
strongest of the two and follow the usual method
Percent Dissociation (Ionization)
Used the specify the amount of weak acid dissociated (ionized) at equilibrium:
Calculating % dissociation involves the same calculation as used in checking the 5% rule!
For solutions of any weak acid HA, H+ decreases as [HA]0 decreases, but the percent dissociation increases as [HA]0 decreases:
Percent dissociation can be used to calculate Ka!
9/26/2010
13
Base Dissociation Constant, Kb
For:
B(aq) + H2O(l) BH+(aq) + OH-(aq)
Kb = [BH+][OH-]/[B]
The position of the equilibrium depends on the competition between the two bases B and OH- for the proton
If B is a much stronger base than OH- the equilibrium position will be far to the right with most of the dissolved base in ionized form
If OH- is a much stronger base than B the equilibrium position will be far to the left with most of the dissolved base in molecular form
9/26/2010
14
Strong Bases
Hydroxides of Group 1A metals (Li, Na, K, Rb and Cs) are strong bases which completely dissociate in aqueous solution:
LiOH(aq) Li+(aq) + OH-(aq)
Hydroxides of Group 2A metals (Ca, Sr and Ba) are also strong bases forming 2 moles of OH- per mole base:
Ca(OH)2(aq) Ca2+(aq) + 2OH-(aq)
However, Group 2A hydroxides have low solubilities
Calculating the pH of Strong Base Solutions
The major species in solution are: M+, OH- and H2O (MOH and H+ are present in very small amounts)
The equilibria present in a strong base solution are:
MOH(aq) M+(aq) + OH-(aq) Kb very large
H2O(l) H+(aq) + OH-(aq) Kw very small
The large amount of OH- from the strong base will shift the second equilibrium even further to the left so the tiny amount of OH- coming
from the autoionization of water can be safely ignored
The only important source of OH- therefore comes from the strong base, and assuming [OH-] ~ [MOH]0, we can then calculate [H+]
followed by the pH of the solution
9/26/2010
15
Weak Bases
Most weak bases contain nitrogen atoms with lone pairs onto which protons can attach:
Calculating the pH of Weak Base Solutions
The major species in solution are: B and H2O
The acid-base equilibria present in a weak acid solution are:
B(aq) +H2O(aq) BH+(aq) + OH-(aq) Kb small
H2O(l) H+(aq) + OH-(aq) Kw very small
The most important source of OH- normally comes from the reaction of the weak base with water which allows us to calculate [OH-], [H+] and hence the pH of the solution using a similar method to that used
for weak acids
Polyprotic Acids
Acids that can produce more than one proton
Polyprotic acids always dissociate in a stepwise manner with the conjugate base of one step becoming the acid in the next step
Example for a generic triprotic acid:
H3A(aq) H+(aq) + H2A-(aq) Ka1 = [H+][H2A-]/[H3A]
H2A-(aq) H+(aq) + HA2-(aq) Ka2 = [H+][HA2-]/[H2A-]
HA2-(aq) H+(aq) + A3-(aq) Ka3 = [H+][A3-]/[HA2-]
Typically Ka1 > Ka2 > Ka3
with each acid becoming successively weaker since the increasing negative charge on the acid makes it more difficult to remove the
proton
9/26/2010
16
Since Ka1 is usually much larger than the others, only the first dissociation step makes a significant contribution to [H+] and hence
the pH
This simplifies the calculations required for most polyprotic acids
Sulfuric Acid (H2SO4)
Sulfuric acid is unique among the polyprotic acids in that it is a strong acid in its first dissociation step and a weak acid in its second step:
All other polyprotic acids are weak acids in each step
9/26/2010
17
Summary
Acid-Base Properties of Salts
When an ionic compound dissolves in water, it dissociates into ions. These solutions can be acid, basic or neutral depending on the acidic
and basic properties of the cations and anions present
Will a solution of NaNO3 be neutral, acidic or basic?Na+ is a cation of a strong base and has no affinity for H+, nor can it
produce H+ so it have no effect on [H+] and therefore the pH
NO3- is weak conjugate base of a strong acid so it WILL NOT remove H+ from water since it prefers to remain dissociated as NO3
-(aq)
The solution forms neither H+ or OH- and will therefore be neutral with a pH of 7
Salts that produce Neutral SolutionsA solution of a salt containing the cation from a strong base and the
anion from a strong acid will be neutral
Examples:
Alkali metal chlorides, bromides, iodides, nitrates, sulfates and perchlorates
Will a solution of NaC2H3O2 be neutral, acidic or basic?
Na+ is a cation of a strong base and has no affinity for H+, nor can it produce H+ so it have no effect on [H+] and therefore the pH
C2H3O2- is a strong conjugate base of a weak acid and so it will
remove H+ from water forming OH- since it prefers to remain in its molecular form:
C2H3O2-(aq) + H2O(l) HC2H3O2(aq) + OH-(aq)
The solution forms OH- and will therefore be basic with a pH of >7
9/26/2010
18
Salts that produce Basic SolutionsA solution of a salt containing the cation from a strong base and the
anion from a weak acid will be basic
Examples:
Alkali metal fluorides, cyanides, carbonates, nitrites, acetates, sulfides, phosphates
Will a solution of NH4Cl be neutral, acidic or basic?
Since Cl- is a weak conjugate base of a strong acid it will not remove H+ from water since it prefers to remain dissociated as Cl-(aq)
Since NH4+ is a strong conjugate acid of a weak base it will donate H+
to water since it prefers to remain in the form of NH3 molecules:
NH4+(aq) + H2O(aq) NH3(aq) + H3O+(aq)
The solution forms H+ and will therefore be acidic with a pH of <7
Salts that produce Acidic SolutionsA solution of a salt containing the cation from a weak base and the
anion from a strong acid will be acidic
Examples:
Ammonium compounds
Relationship between Ka and Kb for Weak Acids
For a weak acid:
HA(aq) H+(aq) + A-(aq)
Ka = [H+][A-]/[HA]
For the conjugate base of this weak acid:
A-(aq) + H2O(l) HA(aq) + OH-(aq)
Kb = [HA][OH-]/[A-]
Multiplying Ka and Kb:
Ka x Kb = ([H+][A-]/[HA]) x ([HA][OH-]/[A-])= [H+] [OH-] = Kw = 1.0 x 10-14
For any weak base and its conjugate acid:
Ka x Kb = Kw
9/26/2010
19
Hydrated Cations
Salts that contain small, highly charged metal ions (Al3+, Fe3+, Cr3+) in combination with anions from strong acids will also be acidic since
the hydrated cations formed in water are weak acids:
Al(H2O)63+(aq) Al(OH)(H2O)5
2+ + H+(aq)
Will a solution of NH4F be neutral, acidic or basic?
Since F- is a strong conjugate base of a weak acid it will try to remove H+ from water since it prefers to remain undissociated as
HF(aq)
Since NH4+ is a strong conjugate acid of a weak base it wants to
donate H+ to water since it prefers to remain in the form of NH3(aq) molecules
It is impossible to tell from this information alone since it will depend on the relative strengths of the acid (NH4
+) and the base (F-)
Solutions of salts containing the cations of weak bases and the anions of weak acids can be acidic, basic or depending on the relative size of
Ka for the acidic ion compared to Kb for the basic ion
Their pH’s can be predicted qualitatively as follows:
Quantitative calculations on these salts are complicated!
Predict whether an aqueous solutions of the following salts will be acidic, basic or neutral:
NH4C2H3O2Ka for NH4
+ = 5.6 x 10-10, Kb for C2H3O2- = 5.6 x 10-10
NH4CNKa for NH4
+ = 5.6 x 10-10, Ka for HCN = 6.3 x 10-10
Al2(SO4)3Ka for Al(H2O)6
3+ = 1.4 x 10-5, Ka2 for H2SO4 = 1.2 x 10-2
9/26/2010
20
This method can in fact be used to determine the qualitative pH of any salt solution!
Classification of Cations and Anions in Solution Summary
9/26/2010
21
Effect of Structure on Acid-Base Properties
Any molecule containing a hydrogen atom can potentially act as an acid
There are two factors which determine whether a molecule containing an X-H will behave as an acid:
1. Bond strength2. Bond polarity
The stronger the bond and the lower the polarity the lower the probability that the proton will be released
C-H bonds are both strong and non-polar so molecules containing these bonds do not show acidic properties
Hydrogen halides on the other hand have polar bonds:
H-F > H-Cl > H-Br > H-Imost polar least polar
Since the H-F bond is the most polar we might expect that HF would be the strongest acid, but it is in fact a weak acid due the fact
that the H-F bond is very strong
Oxyacids are very common and contain the H-O-X functional group
For these acids, their Ka values increase as the number of electronegative oxygen atoms attached to the central X atoms
increase since they are able to draw electrons away from the O-H bond and thereby weaken it:
This is also true for electronegative atoms other than oxygen:
9/26/2010
22
Acid-Base Properties of Oxides
When covalent oxides dissolve in water they produce acidic solutions since the strong covalent bonds within the molecule remain intact
while the O-H bonds in water break to produce protons:
These compounds are called acidic oxides
When ionic oxides dissolve in water they produce basic solutions:
This occurs because the oxide ion reacts with water to form the hydroxide ion:
These compounds are called basic oxides
The Lewis Acid-Base Model
G. N. Lewis
The Lewis model is even more general than the Brønsted-LowryModel:
A Lewis Acid is an electron-pair acceptor since it has an empty atomic orbital that it can use to accept (share) from another molecule
which has a lone pair
A Lewis Base is an electron-pair donor since it has a lone pair of electrons which can be donated (shared) with another molecule which
has an empty atomic orbital
The Lewis Model has the advantage that it covers many reactions which do not involve Brønsted-Lowry acids:
9/26/2010
23
Acid-Base Theories Compared