12GSH GLOBAL STANDARD HIGH HEAD
Global Pump® Standard High Head pumps are specifically designed to effectively handle a wide-range of liquids in applications such as liquid transfer, wash down, fire protection, fracking and jetting where high heads and pressure are required.
Global Pump Standard High Head pumps provide a dependable, highly efficient solution. The model 12GSH is capable of achieving maximum flows of 6,750 gpm (1,533 m3/h) and maximum total head of 340’ (104 m), with solids handling up to 1.5” (38.1 mm) in diameter.
The standard 12GSH is powered by a water-cooled, 6-cylinder diesel engine. Alternative drives are available, including other diesel engines or electric motor options.
FEATURES OPTIONSGlobal Pump’s rugged, heavy duty pumps are engineered specifically for portable application
Available with a variety of priming systems, including Global’s Auto Prime® automatic priming system (compressor-fed venturi priming) or a diaphragm priming system
Non-return valve uses only a single moving part to allow full flow with minimal restriction
Mechanical seal with glycol (biodegradable optional) quench allows the pump to start and run dry
Standard engine control panel provides preset emergency shutdown protection and allows the addition of automatic level control
Global Pump’s Environmental Box separates and silences air exhaust and returns liquid to the pump suction.
Fully guarded coupling Fuel cubes for extended run times and/or remote location as required
Pump casings are hydrostatically tested to 50 psig (345 kPa) above the peak casing design pressure
Sound attenuated enclosure options
Skid-mounted formats with tie downs, lifting bail, and fork pockets
Hose racks, accessory containers and other custom features available as requiredWide range of suction and discharge fittings including Global Pump’s own “QD” Quick Disconnect fittings and accessories
l/s
m³/hr
US gpm
Po
wer
- hp
Hea
d -
ft
Hea
d -
mkW
70006500600055005000450040003500300025002000150010000 500
250
500 7000
40
0
250
50
60
70
80
90
100
650060005500500045004000350030002500100 2000
150
1500
200
250
1000
300
500
350
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600
0 50 100 150 200 250 300 350 400
2000 rpm
1900 rpm
1800 rpm
1700 rpm
1600 rpm
61.2
61.2
73.9
73.9
83.1
83.1
87
87
85.4
85.4
78.7
78.7
69.3
69.3
PUMP MATERIALCasing Cast Steel (CD4MCu is an option)Impeller CD4MCuBearing Housing Cast IronBearing Lubrication GreaseShaft Stainless SteelSeal Silicon Carbide on Silicon CarbideChassis/Fuel Cell SteelNon-Return Valve Nitrile Fitted Cast Iron
SPECIFICATIONSConnections 12” x 8” (300 mm x 200 mm) ANSI
FlangesMax Pump Speed 2,000 rpmMax Flow 6,750 gpm (1,533 m3/h)Max Head 340’ (104 m)Max Static Priming Lift 28’ (8.5 m)Temperature Limit 160° F (70° C)Solids Handling Capability 1.5” (38.1 mm)Max Casing Pressure 200 psig (1379 kPa)Fuel Cell 253 gallons (958 liters)Dry Weight 13,500 lbs
10162 East Coldwater Road, Davison, MI 48423Tel: 810.653.4828 Fax: 810.658.0632
1.866.360.PUMP www.globalpump.com
GLOBAL PUMP
© 2019 Global Pump
Specifications reflect model pictured, and are subject to revision without notice. Global Pump is not liable for any consequential, incidental or indirect damages relating to these specifications.
12GSH GLOBAL STANDARD HIGH HEAD
12GSH
450