© Aastra – 2012© Aastra – 2012
SIP-DECT 4.0Aastra mobility Offer
September 2012
© Aastra – 2012
SIP-DECT 4.0 solution Architecture
15.03.2012
A6xxd / A650c CAT-iq
SIP Terminals - G.722
AM 7450R2.4 SP1
Audio HQRFP 35/36/37 CAT-iq
Handover
WLAN 802.11abgn
Aastra 5000R5.4 SP1
WLAN 802.11abgn
RFP 43 WLAN / DECT
Audio HQ
A6xxd / A650c CAT-i
SIP
© Aastra – 2012
SIP-DECT 4.0 Solution Evolutions
New infrastructure with new generation RFPs• DECT RFP 35, 36, 37 CAT-iq (wide band audio)
• New RFP 43 WLAN (both capabilities DECT/WLAN) compatible 802.11abgn
New terminals • New range A612d, 622d, 632d
• New A650c terminal CAT-iq compatible (wide band audio)
Evolution of the interface between Aastra 5000 and SIP-DECT in SIP standard• Ad-hoc 3 party conference : managed by the OMM
Evolution of the interface for DECT user management• OM AXI between AM7450 / AMP and Open Mobility Manager (OMM)
• Increased integrationAastra 622d
© Aastra – 2012
New generation of DECT RFPs• Compliant with wide band audio (CAT-iq 1.0)
> G.722 support
• More powerfull processor
• 1Gbit compact flash allowing local boot of the RFP (no need TFTP server)
• Ports : > Ethernet 10/100/1000 Mbits
> USB 2.0 (indoor RFPs only)
• RFP 32/34 compatible (size/ screw)
New DECT RFPs 35, 36, 37
15.03.2012
Indoor RFP 35 Outdoor RFPs 36 and 37
RFP 36 RFP 37
© Aastra – 2012
12 DECT channels, 8 voice channels and 4 signalling channels• DECT CAT-iq 1.0 compliant (A650c only)
• DECT XQ compliant (reflective buildings)
PoE 802.3af class 3• Or external power supply 230V AC
LAN 1 Gbit/s
New USB 2.0 port
The RFP downloads its software :• Via the Aastra 5000 TFTP server, or an external TFTP serveur
• Via its USB 2.0 port
RFP 35New indoor RFP
15.03.2012
AlimentationExterne
Port LAN 1 Gbit/s
Port USB2.0
© Aastra – 2012
12 DECT channels, 8 voice channels and 4 signalling channels• DECT CAT-iq 1.0 compliant (A650c only)
• DECT XQ compliant (reflective buildings)
Integrated antennas (dipole)
PoE 802.3af class 3
LAN 1 Gbit/s
Protection IP 65• Dust & water
Can be fixed on the wall or mast-mounted
RFP 36New outdoor RFP with integrated antennas
15.03.2012
© Aastra – 2012
12 DECT channels, 8 voice channels and 4 signalling channels• DECT CAT-iq 1.0 compliant (A650c only)
• DECT XQ compliant (reflective buildings)
External antennas (dipoles or
directionnels)
PoE 802.3af class 3
LAN 1 Gbit/s
Protection IP 65• dust & water
Can be fixed on the wall or mast-mounted
RFP 37New outdoor RFP with external antennas
15.03.2012
© Aastra – 2012
12 DECT channels, 8 voice channels and 4 signalling channels• DECT CAT-iq 1.0 compliant (A650c only)
• DECT XQ compliant (reflective buildings)
WLAN Access Point IEEE 802.11a, b, g and n (MIMO 2x2)
• Integrated WLAN antennas (2,4 GHz / 5 GHz frequency ranges)
• 1 to 4 BSSIDs (Basic Service Set Identifiers) per WLAN access point
PoE 802.3af class 3• Or external power supply 230V AC
LAN 1 Gbit/s• Unique for DECT/WLAN
New USB 2.0 port (similar usage than
RFP 35)
RFP 43 WLANNew indoor RFP DECT / WLAN
15.03.2012
AlimentationExterne
Port LAN 1 Gbit/s
DECT & WLAN
Port USB2.0
© Aastra – 2012
Current range Aastra 610d, 620d, and 630d is slowly remplaced & enriched
Entry level terminal A610d A612d
Mid level terminal A620d A622d
High level and « PTI » terminal A630d A632d
A new Aastra 650c terminal (wide band audio)
SIP-DECT 4.0 SolutionNew range of DECT terminals
DECT Terminal Aastra 622d
© Aastra – 2012
SIP-DECT 4.0 SolutionRange of terminals Aastra 6x2d
Aastra 612dAastra 612d
Emergency
key
Aastra 632dAastra 632dAastra 622dAastra 622d
Volume & Prog
(3 sidekeys)
Entry levelIP 50 compatible
BusinessIP 50 Compatible
IndustrialIP 65 compatible
» Hands free full duplex» 44 rings» Headset jack» Personal directory 200 contacts» Call logs» 3 programmables keys» 10 access for speed dial» Ambiant noise filter
» Hands free full duplex» 44 rings» Headset jack» Personal directory 200
contacts» Call logs» Vibrator» Prog. audio profiles» Bluetooth interface » 7 prog. keys» 10 access for speed dial
» A632d– Alarm sensor for
Man down, immobility,
evacuation– 9 level for ring volume (1
very loud)
3 soft keys
Loudspeaker
Navigation
pad
Backlit colourdisplay
1 Hotkey (prog.)
(622d/632d only)
NEW
© Aastra – 2012
Aastra 612d• Colour display
• More powerfull processor & RAM
• New software 5.0 / new ergonomics
Aastra 622d• More powerfull processor & RAM
• New software 5.0 / new ergonomics
Aastra 632d• Front and rear shells made of plastic dual injection
• More powerfull processor & RAM
• New software 5.0 / new ergonomics
SIP-DECT 4.0 SolutionNovelties of Aastra 6x2d range
© Aastra – 2012
SIP-DECT 4.0 SolutionNew Aastra 650c terminal
Aastra 650c is a new DECT IP/SIP terminal based on CAT-iq 1.0 standard
Well suited for intensive users
Wide band audio (similar to G.722) thanks to its new components (loud speaker, microphone, processor)
Functionnaly equivalent to A622d terminal
New accessories (belt clip, leather pouch)
DECT Terminal Aastra 650c
DECT Terminal Aastra 622d
1cm
© Aastra – 2012
SIP-DECT 4.0 SolutionA60xd/c – SD Card (optional)
micro SD card support (Aastra) for• A62x/63xd and 650c
Ease the repair process• Local parameters are copied on the card
• So are IPEI and DECT subsciption
Security
• Data on the card are ciphered
• Only an Aastra SD card can be used
• No other data must be copied on the card !
15.03.2012
© Aastra – 2012
SIP-DECT 4.0 SolutionRelease : new features
Full SIP interface between Aastra 5000 and OMM
New OM AXI Web Services interface between AM7450/AMP and OMM for user provisioning
CAT-iq 1.0 wide band audio support
VoIP codecs support : G.722, G.729
Integrated ad-hoc 3 party conference in OMM
Free Seating between DECT terminals
© Aastra – 2012
SIP-DECT 4.0 SolutionEvolution of the interface with Aastra 5000
IP-DECT / OMM 2.1 ≤R5.4 SPx• Aastra 5000 specific software
• SIP interface + extension in Aastra « DECT Stimuli » protocol
> Offers management by iPbx for complex functions and display on DECT terminal
> Call logs / missed calls via XML-interf.
• Aastra mobiles licenses
• Interface kept in A5000 R5.4 SP (installed base)
SIP-DECT / OMM 4.0 ≥R5.4 SP1• Common software for SIP-DECT & A5000 IP
DECT
• Full SIP interface + XML terminal interface
> 3 party conference in SIP by the OMM> Other complex functions (call waiting, forward, etc.),
and call log access via XML interface
• Aastra mobiles licenses
AM 7450R2.4 SP1
RFPOMM 4.0
Aastra 5000R5.4 SP1
RFP
© Aastra – 2012
SIP-DECT 4.0 SolutionEvolution of the user’s provisioning interface
IP-DECT / OMM 2.1 ≤R5.4 SPx• Interface based on file exchange between OMM
and AMP of Call Manager A5000 / AX Series
• Offers automatic update of OMM 2.1 database for the DECT users declared in A5000
• Interface kept in A5000 R5.4 SP (installed base)
SIP-DECT / OMM 4.0 ≥R5.4 SP1• Use of the public interface « OM AXI » (application
XML Interface) between OMM and Aastra 5000 / AX Series Call Manager
• Offers automatic update of OMM 4.0 database for the DECT users and the conference rooms declared in A5000
• DECT users can be dynamic (for free seating) or static
• OM AXI interface is not locked for this purpose
AM 7450R2.4 SP1
RFPOMM 4.0
Aastra 5000R5.4 SP1
RFP
Abt. DECTAbt. Conférences
ConfigurationXML
© Aastra – 2012
SIP-DECT 4.0 SolutionWide band audio : CAT-iq (Cordless Advanced Technology - Internet and Quality)
Calls are done in wide band audio when infrastructure + DECT terminals support CAT-iq 1.0
The G.722 audio codec is used
This wide band audio function needs to be activated for a SITE. The SITE must contain new generation RFPs only to allow CAT-iq activation.
Limitations :
• RFPs manage only 4 wide band audio channels (instead of 8 channels in narrow band)
• You must not mix CAT-iq sites and non CAT-iq sites inside a cluster
• Wide band audio is available only if all parties involved are compatible, eg. Call Serveur, caller and called are G.722 compatible
• The DECT-XQ activation and the CAT-iq activation are not compatible simultaneously
© Aastra – 2012
SIP-DECT 4.0 SolutionCodecs
Support of Codecs VoIP :
• G.722 (10, 20, 30 ms)
• G.711 (10, 20, 30 ms)
• G.729 (10, 20, 30 ms)
G.729 is licensed on OMM
G.722 only with new generation RFPs (RFP 35,36,37,43) et le terminal 650c
G.723 no more supported as from R4.0
© Aastra – 2012
SIP-DECT 4.0 Solution3 party conference by the OMM
New function for 3 party conference in SIP
Inside OMM
Conf. ressources in the RFPs
New generation RFPs only
Put on Hold
1
Second call
2
ConferenceMenu
3
Both calls areTransfered to
Conf. room
Conference bridge in new generation RFPs
4
5
RaccrochéRemaining users stay in the conference untill they hang up
© Aastra – 2012
SIP-DECT 4.0 SolutionDECT Free-Seating
Login / Logout in the DECT network
Access by FAC 1 + extension + PIN code 1
DECT user must be configured with the right « dislodgeable» on A5000 side
A user can’t log off on a IP/SIP Aastra terminal and log in on a DECT terminal
Nota : 1 configured into the OMM
Abo 300
1
4
2
3
© Aastra – 2012
SIP-DECT 4.0 & IP DECT 2.1 Solutions Releases compatibility
A5000 R5.3 A5000 R5.4 A5000 R5.4 SP1
IP-DECT R 2.1
SIP-DECT R 4.0 × ×
RFP 32/34 (1)
RFP 35/36/37 × ×
RFP 43 WLAN × ×
A610/620/630d (2) (2)
A612/622/632d (2) (3) (2) (3)
A650c (2) (3) (2) (3)
Notes
(1)RFP 32/34 compatible with SIP-DECT 4.0, with 1 RFP 35,36,37 or 43 to host the OMM 4.0 software
(2)A61x/62x/63xd/650c compatible with IP DECT 2.1 and Aastra 5000 TDM DECT
(3)A622/632d/650c are not DOA in OMM 2.1
© Aastra – 2012
SIP-DECT 4.0 SolutionCapacities
OMM on RFP OMM on Server
DECT RFPs 256 2048
DECT/WLAN RFPs 256 2048
A6xxd/c Terminals 500 4500
A142d Terminal 500 4500
Other terminals (GAP) 500 (no roaming over 256 RFPs)
Conf. rooms 3 / RFP5 / dedicated RFP
3 / RFP5 / dedicated RFP
© Aastra – 2012
Thank you !
April 21, 2023 Title of the presentation 23