zz - Riko UK · PDF filezz . 2 Contents Forest-Master Mulching Flails ... Forest blade Grab R54836500, with hydraulic top beak, Euro quick hitch standard, other hitch options available

1

zz

2

Contents

Forest-Master Mulching Flails ......................................................................................................................................................... 4

SKIDDING GRAPPLES ........................................................................................................................................................................ 5

Timber grabs and Site Clearance Grabs for Loaders etc .................................................................................................................. 6

STROKE HARVESTERS, FELLING HEADS / ACCUMULATOR FELLING HEADS ..................................................................................... 7

Kinetic 8x8 Forwarder ...................................................................................................................................................................... 8

ATV / UTV FORESTRY EQUIPMENT (Pictures) .................................................................................................................................. 9

ATV / UTV FORESTRY EQUIPMENT ................................................................................................................................................ 10

SMALL FORESTRY TRAILERS WITH CRANES ................................................................................................................................... 11

FORESTRY TRAILERS & CRANES SETS ............................................................................................................................................. 12

LARGE FORESTRY TRAILERS (Select crane from list) ...................................................................................................................... 13

FORESTRY CRANES (Select trailer from trailer list, cranes can be ordered separately) ................................................................ 14

LINKAGE MOUNTED WINCHES WITH MANUAL CONTROL ............................................................................................................ 15

LINKAGE MOUNTED WINCHES WITH ELECTRO-HYDRAULIC CONTROL ......................................................................................... 16

Single & Double Drum.................................................................................................................................................................... 17

HYDRAULIC GEAR DRIVEN WINCHES ............................................................................................................................................. 18

Uniforest Savoy ........................................................................................................................................................................... 19

Domestic Log Splitters ................................................................................................................................................................... 21

9 Ton Vertical Log Splitter .............................................................................................................................................................. 22

10-11 Ton Vertical Log splitter ...................................................................................................................................................... 23

12 ton Vertical splitters .................................................................................................................................................................. 24

UF Titanium Log Splitters, 13, 16, 20, 25 Ton vertical ................................................................................................................... 25

ARB Splitter .................................................................................................................................................................................... 26

Horizontal Log splitters: 14, 18, 23, 30, 40 & 50 Ton ..................................................................................................................... 27

Horizontal Log Splitters. 30 – 40 - 50 ton ...................................................................................................................................... 29

HORIZONTAL LOG SPLITTERS A 15 - 22 – 30 – 40 - 50 ton ............................................................................................................. 31

Horizontal log splitters Contractor SK15 / 20 / 24 / 30 & Pro 33 / 43 ........................................................................................... 32

Split-Fire Splitters ........................................................................................................................................................................... 33

13 Ton Vertical trailed splitter ....................................................................................................................................................... 34

Hydraulic Cone Splitters ................................................................................................................................................................. 35

Logging Saw Benches ..................................................................................................................................................................... 36

Band Saws ...................................................................................................................................................................................... 37

Log Conveyors ................................................................................................................................................................................ 39

WP30 & WP36 Firewood Processor (Pictures) .............................................................................................................................. 40

WP30/36 Firewood Processor ....................................................................................................................................................... 41

DUUN PROCESSORS 320 & 370X Processors .................................................................................... Error! Bookmark not defined.

DUUN 420 PROCESSORS ................................................................................................................... Error! Bookmark not defined.

UNIFOREST TITAN 40-20 PROCESSOR ............................................................................................................................................ 42

Billet Processors ............................................................................................................................................................................. 43

Python Billet Bundler ..................................................................................................................................................................... 44

3

The force needed to split wood varies a lot, so when choosing a log splitter consider the following. It’s not all about price

but more about making the job as easy and quick as your budget will allow.

Vertical Log Splitters are usually used when you can lift the wood by hand and put it on a waist height table for splitting

into logs. To make big wood easier to handle and lift onto a table, it is often cut into rings. Some of the vertical models

have an adjustable table height that can also be removed so you can split long wood up to 110cm high. If it is a big

diameter, the 12-14-16-18-25 ton models can have a lifting arm to stand the log up.

Horizontal Log Splitters are mainly designed for what we call Billeting, IE you take a 100cm log and split it into long

Billets that you then season (dry).When the Billets are seasoned, you can cut them to the log length you want, hopefully

with one of our saw benches, or saws and conveyors. However, you can place a number of rings in a row on a horizontal

splitter and push the row through the knife. To do this, the rings must be cut parallel so they don’t fly off whilst splitting!

Horizontal log splitters can be specially ordered to take the log length the customer wants. For example, the A22OR

could be with a 2 or 2.5 meter log length. Again, the Billet can then be cut to log length on a saw. Using this method you

can also take large diameter timber and make it into Billets for a firewood processor. For example, if the firewood

processor takes a maximum diameter of 30cm timber, you can use something like a 30 Ton horizontal log splitter with 2

meter log length to make four 2 meter long Billets that can then be put through the 30cm firewood processor.

To help you decide what size log splitter you need, the following guide may help. It is based on splitting green, average /

good timber, the maximum length the splitter will take and with a single knife into two pieces. They will of course split

bigger diameter timber but this is a general guide that will make sure you are happy with your log splitter even if you

have bad timber:

Used correctly, it’s surprising what a small splitter will do but…….

Vertical splitters Horizontal splitters

5 ton = 12cm diameter & 35cm long. 8 ton = 20cm diameter & 55cm long. 9 ton = 25cm diameter & 56cm long.

11 ton = 30cm diameter & 70cm long. 12-14 ton = 30-40cm diameter & 110cm long 16-18 ton = 40-50cm diameter & 110cm long.

25 ton = 50-80cm diameter & 110cm long.

12 ton = 30-40cm diameter & 70-110cm long 14-16 ton = 40-60cm diameter & 70-160cm long

22 ton = 60-80cm diameter & 70-250cm long 30 ton = 60-100cm diameter & 100-250cm long 40 ton = 60-120cm diameter & 100-300cm long 60 ton = 60-140cm diameter & 100-300cm long

100 ton = 60-200cm diameter & 100-300cm long

If the timber is very bad with lots of knots and twists, or is seasoned, then you will need more power for the diameter. Especially if it is seasoned hard wood such as Oak, as this becomes very hard to split. When a vertical splitter is available with a 4 way knife, you should consider the following:

1) The 4 way is for splitting one log / piece of timber into four equal logs. 2) The timber should be nice and straight with no big knots 3) The timber should be straight grained and not all twisted. So if the 4 way knife is for a 12 ton machine, then the maximum diameter is 30cm. Information we need to offer advice on which log splitter is best for you: • Is it for commercial or private use? • What timber, i.e. hardwood or softwood? • What diameter? • What length do you usually cut your logs to? • Are you interested in electric, petrol engine, tractor powered by PTO or tractor powered by the tractor hydraulics? • If it is a tractor one, what model & horse power is it? • If it is electric do you have single phase or 3 phase electric at the place it is being used?

4

Forest-Master Mulching Flails

HEAVY FORESTRY MOWER

WITH “CAGE” ROTOR

Mechanically driven by the PTO of

the tractor (540 RPM or 1000

RPM – to be specified upon order)

PTO shaft with free wheel

included. Cuts material up to

10cm / 4 inches in diameter.

Mounted on the front or rear 3-point hitch Cut width Hammers Weight Kg £

350 VD 110 V (on demand) (30hp+) 1.10 m 12 430 7.000,00

351 VD 150 MV (mechanical side shift) (40hp+) 1.50 m 17 560 7.500,00

352 VD 180 M (heavy gearbox) (70hp+) 1.80 m 20 620 9.000,00

Optional: Price £

35-02 Height adjustable roll for VD 150 and VD 110 470,00

351-01 352-02 352-01

Hydraulic side shift for VD 150 MV Height adjustable roll for VD 180 Hydraulic side shift for VD 180 M

580.00 615,00 580,00

351-03 Hydraulic heavy rear adjustable hood with 2 cylinders (tractor hydraulics) + stronger housing (all models)

1.995

351-04 35-05 35-06 35-07 35-03-07

Mechanically adjustable bull bar with reinforced mowing head (all models) Driven with 1000 RPM instead of 540 RPM Front mounted, instead of rear mounted Additional rubber protection together with the chain protection Hydraulic rear hood, adjustable bull bar, reinforced mowing head

1.510 170,00 170,00 405,00 3,140

5

SKIDDING GRAPPLES

RRZ110 Skidding grapple. Heavy Duty, max tip to tip opening 1100 mm, minimum timber

diameter 100mm, gripping force 2500 kg free swinging, weighs 140 Kg,

£ 1,370

COWINCH-M Hydraulic winch mounted on above, 25m X 6mm cable, 445Kg pull, requires 1

D/A valve.

£ 1,100

RRZ165 Skidding grapple. Heavy Duty, max tip to tip opening 1650 mm, minimum timber

diameter 100mm, gripping force 5000 kg free swinging, weighs 290 Kg,

£ 1,870

UF1300F Loader grapple. Heavy Duty, opening 70 - 130cm, 360 Hydraulic rotator with anti

swing brake, 12 volt diverter valve requires 1 DA service only, weighs 216 Kg, £ 2,530

UF1800F linkage grapple. Heavy Duty, opening 80 - 180cm, manual spring return rotator,

requires 1 DA service, weighs 300 Kg £ 2,420

UF1800F Loader / linkage grapple. Heavy Duty, opening 80 - 180cm, 360 Hydraulic rotator,

requires 2 DA service, weighs 343 Kg £ 2,860

UF1800F Loader / linkage grapple. Heavy Duty, opening 80 - 180cm, 360 Hydraulic rotator,

12 volt diverter, requires 1 DA service, weighs 343 Kg £ 3,020

UFSFS1800 Hydraulic winch with radio remote control. Cable size TBA £ 2,140

UFPRO 1 Skidding grapple. Heavy Duty, tip to tip opening 180cm, 9.5 ton gripping force,

60cm manual extension, 45 degree Hydraulic left / right slew, weighs 365 Kg, £ 2,970

UFPRO 2 Skidding grapple. As above but with hydraulic extension as well as Hydraulic left

/ right slew, weighs 380 Kg, £ 3,240

UFPRO 3 Skidding grapple. As above but complete with control valves and levers, and

hydraulic rotator, weighs 405 Kg, £ 4,290

UFSFS1800 Hydraulic winch & radio remote control. 30m X 8mm cable,1800Kg pull £ 2,140

6

Timber grabs and Site Clearance Grabs for Loaders etc

Grabs and Rotators for Cranes and Excavators

Standard grab Combi Grab Clamshell

A Loader grab DUTK105/Euro, timber gran with hydraulic top beak, Euro quick hitch standard, other hitch options available. 235Kg.

£ 1,350

B Pallet fork Grab R54480000, sliding tines, removable hydraulic top beak (beak also available separately), Euro quick hitch standard, other hitch options available.

£ 1,250

B Pallet fork Beak R54480200, hydraulic beak with mounting & hoses, from above. £ ,650

C Forest blade Grab R54836500, with hydraulic top beak, Euro quick hitch standard, other hitch options available. 235Kg

£ 1,250

D Timber Grab. Twin hydraulic beaks. Suitable for Large Loaders, Tele-handlers, Loading Shovels.

1.2 Mtr wide. 1.5 Mtr wide. 1.8 Mtr wide.

£ 2,120 £ 2,225 £ 2,585

E Land Clearance Grab For Handling Timber, Rocks and Roots etc. Suitable for Large Loaders, Tele-handlers, Loading Shovels.

1.8 Mtr wide. 2.1 Mtr wide. 2.4 Mtr wide.

£ 6,345 £ 6,595 £ 6,920

Model Weight A B C D E F G Price

JLGRAB & Rotator 25 + 10 700 tba tba tba tba tba 250 £ 850

TECTHL30 Grab 66 1065 660 395 305 460 65 310 £ 640

TETCTHLS30 Grab 68 1065 730 405 450 460 65 310 £ 712

UFGR1100 PRO 76 1100 430 50 320 £ 875

TETCHLS30 Combi 78 1065 730 430 450 460 65 600 £ 935

TECTP120 Grab 90 1200 770 450 480 510 65 355 £ 965

TECTP120 Combi 105 1200 770 450 480 510 65 700 £ 1,288

UFGR1300 PRO 94 1300 420 70 325 £ 1,050

UFGR1500 PRO 110 1500 480 70 350 £ 1,150

TECTP155 Grab 190 1550 960 620 630 600 65 430 £ 1,507

UFGR1800 186 1800 560 70 370 £ 1,250

AHTG28ST 304 1510 704 846 512 £ 3,450

AHTG42ST 440 1750 1057 1008 533 £ 4,665

COBUCKET50L 54 1191 363 NA NA 605 NA 396 £ ,950

COBUCKET60L 61 1191 363 NA NA 605 NA 496 £ 1,050

CO-ROTATOR tba 1 ton rotator plus £ 350

UFGR30PF tba 3 ton rotator plus 4 bolt flange adaptor £ 500

UFGR465 tba 4.5 ton rotator with 4 bolt fixing £ 595

UFGR603DSB tba 6 ton rotator with 6 bolt fixing £ 995

7

STROKE HARVESTERS, FELLING HEADS / ACCUMULATOR FELLING HEADS

Stroke harvester heads PRICE

Accumulating felling heads PRICE Naarva S23 logging 9,550 Naarva S23C logging 10,550 Naarva E20 9,400 S23C Bluetooth system 3,900 Naarva E20Q 10,600 Naarva S25 12,900 Naarva E25 12,600 Naarva S25R 16,000 Naarva E25H 15,100 Felling heads Naarva E32 25,500 Naarva K20 8,850 Naarva E50 chainsaw 28,000 Naarva K25 9,100 Naarva K32 19,000

Naarva K50C chainsaw 24,000 Accumulating grippers and quick coupling for Naarva heads E20 accumulating grippers

1,900 E25 accumulating grippers 3,300 Quick coupling for Naarva 950 Cover for 5-pole connector 50 Naarva cutting guillotines Ø23 cm cutting unit 4,000 Ø25 cm cutting unit 4,000 Ø32 cm cutting unit (Ø100 mm cylinder) 4,800 Ø32 cm cutting unit (Ø90 mm cylinder) 4,800 Naarva controllers 5 buttons controlling 550 Radio controlling with mini transmitter 1,500 Radio controlling with external buttons 1,950 Radio controlling with external mini-buttons 2,400 Naarva programmable logic controllers PLC controlling with push buttons

1,200 PLC controlling with joys sticks 1,500 Naarva uprooters Naarva uprooter P16 4,500 Naarva uprooter P25 20,000 Naarva pole planting bucket 4,500 Extension booms Boom for 5-8 tn excavators 1,200 Boom for 10-20 tn excavators 3,900 Hydraulic extension boom 5,000 Rotators and links FR7-A25W25 590 FR10-W25A30 660 FR15-W30A30 870 FR15-W30B173 860 FR21-W35A35 1,050 FR21-W35B173 1,080 Black Bruin BBR15HD short link and 2 brakes 3,350 Black Bruin BBR15HD long link and 2 brakes 3,400 O-type link for FR7, FR10 and FR15 115 I-type link for FR7, FR10 and FR15 125 Link for FR21 rotator 105

8

Kinetic 8x8 Forwarder

Kinetic T8 Forwarder

Maximum load 3000 Kg

Engine

(Yanmar diesel) 26Hp

Axel

configuration 8x8

Transmission 4 : 1

Weight

Without crane 1790Kg

Crane CO 470

Crane reach 4.7M

Crane eight (kg) 344

PRODUCT PRICE *

Kinetic 8x8 diesel with Country crane 470 £38,000

ON / OFF control valve £ 395

Radio winch for crane 470 £ 1,046

Working LED lights on crane £ 398

Tipping dump body with tailgate £ 2,982

Clamshell bucket 60L £ 621

Reverse drive and braking (for driving machine when seated in crane working position)

£ 1,059

Steel band tracks (1pair) £ 1,428

Loading area extension 80cm £ 347

Additional hydraulic outlet £ 308

Extension bolster pins (1pair) £ 45

Calix engine heater (http://www.calix.se/en/products/engine-heaters

£ 298

Saw holder £ 89

Front windscreen with wiper £ 400

Clearplastic, zip in, roll down side panels £ 400

Full cab kit. £ POA

* Excludes VAT but includes UK mainland delivery however a surcharge may apply for some area’s. Prices are subject to currency fluctuations and will only be binding on issue of a written quotation.

9

ATV / UTV FORESTRY EQUIPMENT (Pictures)

10

ATV / UTV FORESTRY EQUIPMENT

UT22181 Skidding arch with unique lift and tension system. £ ,710

UT22184 Skidding arch complete with rear axle carrier to keep tree off the ground £ 1,150

UTPRO400 Timber trailer, 2 ply tyres, timber bolsters. UW 137Kg, GW 1000Kg Options: Manual crane with mechanical winch or electric winch, radio remote control, Scissor timber grab.

£ 1,370

UTPRO600 Timber trailer, 4 ply tyres, timber bolsters. UW 150Kg, GW 1400Kg Options: Manual crane with mechanical winch or electric winch, radio remote control, Scissor timber grab.

£ 1,590

UT44319 Manual crane and winch. £ ,550

UT44286 Scissor timber grab. £ , 80

UT44347 Electric winch. 15M X 4.5mm cable, 1300Kg pull. £ ,740

UT74500 Radio remote control for winch. £ ,210

FRPHM150

UTV / ATV, Quad tractor trailer with timber bolsters, removable tipping body, Manual crane with mechanical winch. Optional electric winch and optional timber grab. 340omm X 130mm X 1700MM, 1500Kg capacity.

£ 1,920

COT15-330

Trailer, 1500Kg capacity, front gate, 2 pairs (4) bolsters . 22/11R8 tyres on rocking beam axle, 3.3 mtr crane with 0.08 grab & rotator, Valve with Joystick levers for crane + single levers for legs etc. Additional 1m trailer length with pair of bolsters and sockets: £450

£ 6,050

COWINCH Radio remote control winch for crane. 25m X 6mm cable, 445Kg pull, 30 m/min speed. Includes manual valve operation.

£ 1,400

COPOWER 5.5hp petrol engine power pack for mounting on ATV front rack £ 1,430

COT152WD Hydraulic 2 wheel drive kit, 5 km/h engaged, maximum 40 km/h disengaged,

12vlt Electric on / off control £ 1,980

COTTRACK Band tracks for use with or without hydraulic 2 wheel drive £ 1,040

COT154WD Hydraulic 4 wheel drive kit , 5 km/h engaged, 12vlt Electric on / off control £ 2,280

COAUGER Post hole auger for crane £ POA

COCLAM 50L 50L Clam shell bucket for crane £ ,930

11

SMALL FORESTRY TRAILERS WITH CRANES

JMS900UK NSKCF1

1000 - 1500Kg, ladder chassis, adjustable axle, Head board, 4 pairs bolsters.

23 X10.50-12 tyres 332 tyres. ‘A’ type hydraulic legs & Headboard . 3.2Mt crane, 360 rotation, 280Kg at full reach, joystick valve block, grab, rotator.

£ 7,700

JMS900RAUK NSKCF1

2000Kg, ladder chassis, adjustable axle, Head board, 4 pairs bolsters.

23 X10.50-12 332 tyres. ‘A’ type hydraulic legs & Headboard . 3.2Mt crane, 360 rotation, 280Kg at full reach, joystick valve block, grab, rotator.

£ 8,030

JMS1005UK NSKCF1

3000Kg ladder chassis, adjustable axle, head board, 4 pairs bolsters.

26-1200-12 332 tyres. ‘A’ type hydraulic legs & Headboard . 3.2Mt crane, 360 rotation, 280Kg at full reach, joystick valve block, grab, rotator.

£ 8,800

JMS1005UK NSKCF2

3000Kg ladder chassis, adjustable axle, head board, 4 pairs bolsters.

26-1200-12 332 tyres. ‘A’ type hydraulic legs & Headboard . 3.8Mt crane, 360 rotation, 280Kg at full reach, joystick valve block, grab, rotator.

£ 9,570

Optional Folding chassis £ ,330 Optional Brakes on two wheels £ ,440 Optional CF1 & 2 hydraulic extension with extra valve lever etc, 600mm £ ,820

COT30-470

3000Kg , capacity single beam trailer, head board, 3 pairs (6) bolsters. 10 / 80-12

AW tyres. ‘A’ type hydraulic legs & Headboard . 344Kg crane 3.7 + 1Mt extension, 360 rotation, 370Kg at full reach, joystick valve block, grab, rotator. Optional: 300/65-12 wheels £350. Brakes on 2 wheels £575.

£ 8,250

COT50-480

5000Kg , capacity single beam trailer, head board, 3 pairs (6) bolsters. 11.5 / 80-15.3

AW tyres. ‘A’ type hydraulic legs & Headboard . 373Kg crane 3.7 + 1Mt extension, 360 rotation, 370Kg at full reach, joystick valve block, grab, rotator. Optional: 400/60-15.5 wheels £440. Brakes on 2 wheels £675.

£ 8,800

Optional Extra pair bolsters and sockets £ ,330 Optional 1 meter extension with extra bolsters and sockets £ ,440 Optional Rear light frame, number plate lights and folding outer lights £ ,300 Optional Operators platform on drawbar £ ,330

COT302WD Hydraulic 2 wheel drive kit, 5 km/h engaged, maximum 40 km/h disengaged, 12vlt Electric on / off control

£2,470

12

FORESTRY TRAILERS & CRANES SETS

ON7T – ON52

7000Kg* , capacity single beam trailer, head board, 3 pairs (6) bolsters. 300 / 80-15.3 10 ply AW tyres. 530Kg crane, 5.2 Mt, 480Kg** at full reach. 2 Joystick (one twist) + 2 levers. 30Kn rotator. G16 timber grab. Gullwing or ‘A’ legs.

£ 8,800

Options

Trailer: 400/60-15.5 £400. Brakes inside two wheels £390 or 4 wheels £650. Extra pair

bolsters £280. Steering drawbar £500. Platform £275. Folding lights £250 Crane: PTO driven Hydraulic pumps: 60L £700, 80L £780. Hydraulic tanks 60L £360.

Valves: seven individual levers. 2 Joystick and 3 individual levers.

ON10T -ON67S

10000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 400/60-15.5 328 tyres. 880Kg crane, 6.7 Mt (1 ext), 436Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers. 30Kn rotator. G16 timber grab. A type legs.

£ 14,300

ON10T –ON72

10,000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 400/60-15.5 328 tyres. 1,140Kg crane, 7.2 Mt (1 ext), 700Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers . 40Kn rotator. G21 timber grab. A type legs.

£ 15,840

ON12T-ON67S

12000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 400/60-15.5 328 tyres. 500/50-17 tyres 880Kg crane, 6.7 Mt (1 ext), 436Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers. 30Kn rotator. G16 timber grab. A type legs.

£ 15,180

ON12T-ON72

12000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 400/60-15.5 328 tyres. 500/50-17 tyres 1140Kg crane, 7.2 Mt (1 ext), 700Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers. 40Kn rotator. G21 timber grab. A type legs.

£ 16,720

ON14T-ON67S

14000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 500/50-17 tyres 880Kg crane, 6.7 Mt (1 ext), 436Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers . 30Kn rotator. G16 timber grab. A type legs.

£ 15,950

ON14T-ON72

14000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 500/50-17 tyres 1140Kg crane, 7.2 Mt (1 ext), 700Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers. 40Kn rotator. G21 timber grab. A type legs.

£ 17,930

ON14T- ON83T2

14000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 500/50-17 tyres 1230Kg crane, 8.3 Mt (2 ext), 540Kg** at full reach. Hydraulic controls: 2 Joystick (two twist) + 2 levers. 40Kn rotator. G21 timber grab.

£ 18,700

Options

Trailer: 520/50-17 tyres. 550/45-22.5 tyres £1350. Hyd Brakes on four wheels £390. Air brakes on

4 wheels £1950. Frame extension £275. Extra pair bolsters £300. Platform £275. Folding lights £250 Cranes: PTO driven Hydraulic pumps: 60L £700, 80L £780. Hydraulic tanks: 60L (7-10T) £360. 80L (10-12T) £400. 100L (12-14T) £475

Valves: Electric on/off joysticks, Pilot operated joysticks with on/off. Proportional with mini electric

joysticks for armrests. Radio remote control with belt mounted controls. * Capacity of trailer excludes crane weight which is stated in details above. ** excludes weight of grab and rotator which varies between 90-140Kg.

13

LARGE FORESTRY TRAILERS (Select crane from list)

ON7T 7000Kg* capacity single beam trailer, head board, 3 pairs (6) bolsters. 11.5 / 80-15.3 10 ply AW tyres.

£ 3,850

Options Trailer: 400/60-15.5 £400. Brakes inside two wheels £390 or 4 wheels £650. Extra pair

bolsters £280. Steering drawbar £500. Platform £275. Folding lights £250

ON10T 10000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 400/60-15.5 328 tyres.

£ 6,820

ON12T 12000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 400/60-15.5 328 tyres. 500/50-17 tyres

£ 7,700

ON12T2WD 12000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 500/50-17 tyres

£ POA

ON14T 14000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 500/50-17 tyres

£ 9,350

ON14T2WD 12000Kg* capacity ladder chassis trailer, steering drawbar, headboard, 4 pairs (8) bolsters, brakes inside 2 wheels. 500/50-17 tyres

£ POA

Options

Trailer: 520/50-17 tyres. 550/45-22.5 tyres £1350. Brakes inside four wheels £390. Frame

extension £275. Extra pair bolsters £300. Platform £275. Folding lights £250

* Capacity of trailer excludes crane weight

14

FORESTRY CRANES (Select trailer from trailer list, cranes can be ordered separately)

** excludes weight of grab and rotator which varies between 90-140Kg Crane options: Electric on/off joysticks, Pilot operated joysticks with on/off. Proportional with mini electric joysticks for armrests. Radio remote control with belt mounted controls. PTO driven Hydraulic pumps: 60L £700, 80L £780. Hydraulic tanks: 60L (7-10T) £360. 80L (10-12T) £400. 100L (12-14T) £475

All cranes come with joystick controls, grab & rotator. Lift capacities exclude grab & rotator

NSKCF1 3.2m 3.2Mt, 360 rotation, 280Kg** at full reach £ 4,670

NSKCF2 3.8m 3.8Mt, 360 rotation, 360Kg** at full reach, £ 5,440

NSKCF1-2 EXT CF1 & 2 hydraulic extension with extra valve lever etc, 600mm £ ,80

NSKCF3 3.2m 3.2Mt, 360 rotation, 550Kg** at full reach £ 6,320


NSKCF3 EXT CF3 hydraulic extension with extra valve lever etc, 800mm £ ,820


NSKCF4 EXT CF4 hydraulic extension with extra valve lever etc, 800mm £ ,820

NSKCF1/2FL-H&L ‘A’ type hydraulic legs & Headboard for trailer mounting for KCF1

& 2 cranes (replaces existing trailer Headboard) £ 640

NSKCF1/2-3 POINT ‘A’ or ‘Gull wing’ type hydraulic legs with 3 point linkage tractor mounting for

KCF1 & 2 cranes. £ 860

NSKCF3/4FL-H&L ‘A’ type hydraulic legs & Headboard for trailer mounting for KCF 3

& 4 cranes (replaces existing trailer Headboard) £ 860

NSKCF3/4-3 POINT ‘A’ or ‘Gull wing’ type hydraulic legs with 3 point linkage tractor mounting for KCF

3 & 4 cranes. £ 1,080

ON52

5.2 Mt, 480Kg** at full reach. Hydraulic controls: 2 Joystick (one twist) + 2 levers.

30Kn rotator. G16 timber grab.

Options: G21 grab: £100. Trailer Gull wing legs: £900.

Tractor ‘A’ legs: £1150

£ 5,220

ON67ST1

6.7 Mt (1 ext), 436Kg** at full reach. Hydraulic controls: 2 Joystick + 4 levers.

30Kn rotator. G16 timber grab. Options: 2 joystick (2 twist) + 2 levers: £225.

40Kn rotator: £95. G21 grab: £100. Trailer Gull wing legs: £1650. Tractor + trailer

‘A’ legs: £1350.

£ 6,980

ON72T1


40Kn rotator. G21 timber grab. Options: 2 joystick (2 twist) + 2 levers: £225 G23

grab: £150. G23 energy grab: £350.

Trailer Gull wing legs: £1650. Tractor + trailer ‘A’ legs: £1350

£ 9,020

ON83T2


40Kn rotator. G21 timber grab. Options: 2 joystick (2 twist) + 2 levers: £225 G23

grab: £150. G23 energy grab: £350.

Trailer Gull wing legs: £1650. Tractor + trailer ‘A’ legs: £1350

£10,120

NSKCF1 3.2M

ON83T2 8.3M ON67ST1 6.7M

15

LINKAGE MOUNTED WINCHES WITH MANUAL CONTROL

ALL WINCHES ARE SUPPLIED AS STANDARD WITH SMOOTH DOUBLE ROLLED CABLE FOR SMOOTHER

WINDING ONTO THE DRUM, LESS FRICTION AND EASIER ON THE HANDS

UF30M 3 Ton, top pulley, 50 M of 9mm cable, PTO shaft. £ 1,590

UF35M 3.5 Ton, top & bottom pulley,70 M of 9mm cable, PTO shaft. £ 1,700

UF40 Eco 4 ton, top pulley, 60M of 10 cable, PTO shaft. £ 1,760

UF40E 4 Ton, top & bottom pulley, tow hitch, 70 M of 11mm cable, PTO shaft. £ 1,980

UF45M 4.5 Ton, top & bottom pulley, tow hitch,70 M of 11mm smooth cable, PTO shaft. £ 2,420

UF50Eco 5 Ton, top pulley, 60 M of 10mm cable, PTO shaft. £ 1,980

UF50E 5 Ton, top & bottom pulley, tow hitch, 70 M of 11mm cable, PTO shaft. £ 2,420

UF55M 5.5 Ton, top & bottom pulley, tow hitch, 70 M of 11mm smooth cable, PTO shaft. £ 2,860

UF65M 6.5 Ton, top & bottom pulley, tow hitch, 80 M of 12mm smooth cable, PTO shaft £ 3,740

UF85M 8.5 Ton, top & bottom pulley, tow hitch, 90 M of 13mm smooth cable, PTO shaft £ 4,290

Cable end & wedge (includes basic choker eye). T3 small cable / T1 large cable £ 25 - 28

Simple Choker slider 80 Grade £ 17.00

Swivel Choker slider 80 Grade £ 26.00

Swivel Choker slider 100 grade £ 33.00

Choker slider with pulley wheel for running on cable. £ 55.00

2.0 M Choker chain, 80 Grade, 7mm round £ 33.00


2.5 M Chocker chain, 80 Grade, 7mm square £ 42.00




4 > 8 Ton Snatch block, side entry £ 165.00



9mm normal cable. 6X19 DIN.3058 1960N/mm2. Per meter £ 2.04



12mm normal cable. 6X19 DIN.3058 1960N/mm2. Per meter £ 3.12 8mm double flat, smooth cable. 6X25 DIN.3060 2160N/mm2. Per meter £ 3.30 9mm double flat, smooth cable. 6X25 DIN.3060 2160N/mm2. Per meter £ 3.44 10mm double flat, smooth cable. 6X25 DIN.3060 2160N/mm2. Per meter £ 4.50 11mm double flat, smooth cable. 6X25 DIN.3060 2160N/mm2. Per meter £ 5.14 12mm double flat, smooth cable. 6X25 DIN.3060 2160N/mm2. Per meter £ 5.78 13mm double flat, smooth cable. 6X25 DIN.3060 2160N/mm2. Per meter £ 5.98

16

LINKAGE MOUNTED WINCHES WITH ELECTRO-HYDRAULIC CONTROL

ALL WINCHES ARE SUPPLIED AS STANDARD WITH SMOOTH DOUBLE ROLLED CABLE FOR SMOOTHER

WINDING ONTO THE DRUM, LESS FRICTION AND EASIER ON THE HANDS

UF40HPro 4 Ton, top & bottom,70 M of 10mm smooth cable, PTO shaft. £ 3,470

UF40HPro1 As above but with hydraulic cable unwinding. £ 3,630

UF45H 4.5 Ton, top & bottom pulley, tow hitch, 70 M of 10mm smooth cable, PTO shaft. £ 3,430

UF50HPro 5 Ton, top & bottom pulley, tow hitch, 70 M of 11mm smooth cable, PTO shaft. £ 4,130

UF50HPro1 As above but with hydraulic cable unwinding. £ 4,400


UF55HW As above but 180cm wide £ 4,130

UF55HPro As above but with hydraulic cable unwinding. £ 4,950

UF60EH 6 Ton, top & bottom pulley, tow hitch, 80 M of 12mm smooth cable, PTO shaft. £ 4,950

UF60EHW As above but 180cm wide £ 5,120



UF65HW As above but 180cm wide butt plate. £ 5,340


UF80EH 8 Ton, top & bottom pulley, tow hitch, 90 M of 13mm smooth cable, PTO shaft. £ 5,450

UF80EHW As above but 200cm wide £ 5,500


UF85H 8.5 Ton, as above but hydraulic control with wander lead £ 5,720

UF85HW As above but with 200cm butt plate. £ 5,890


UF85HPro1 As above but with hydraulic hinged lower butt plate £ 7,200

Top swivel Hydraulic cable unwinding for 55-65-85H, standard on PRO models £ 880.00

Cable end & wedge (includes basic choker eye). T3 small cable / T1 large cable £ 25 - 28

Simple Choker slider 80 Grade £ 17.00



Choker slider with pulley wheel for running on cable. £ 55.00










T60 Radio remote, 120mt range, 6 channel (in-out + stop + throttle control*) £ 880.00

T70 Radio remote, 200mt range, 8 channel (in-out + stop + throttle control* + Eng stop / start*) £1,100.00

TFA5 Radio remote, 500mt range, 8 channel (in-out + stop + throttle control* + Eng stop / start*) £1,090.00

*Additional radio remote control of engine rpm for manual engine throttles £ 320.00

*Additional radio remote control of engine stop / start £ 610.00

*Additional radio remote control of engine rpm for electronic engine throttles £ 610.00

17

Single & Double Drum Tractor Linkage winches for professionals

Standard fitting (excludes cable):

Hydraulic cable unwinding (variable speed)

Wire guide and pressure cylinder for more even winding on drum

Foldable safety guard

Properties: Bevel and helical gear drive

Highly efficient gear drive – minimal oil heating

Separate hydraulic systems for the drum and the device for unwinding wire rope

Separate drum control on double drum winches

Multi-blade clutch constituted of four plates

Compact and strong construction, chain saw and fuel tank holder

Room for forestry chains and other small forestry equipment on the front side of winch

* 120G Power includes radio remote control. **Cable Choice per meter: ‘Smooth’ 11mm: £4.95. 12mm: £ 5.50. 13mm: £ 5.75 all + vat Radio remote control T70 (in-out + stop + throttle control* + Eng stop / start*) £ 900 + vat Additional radio remote control of engine rpm for manual engine throttles £ 295 + vat Additional radio remote control of engine rpm for electronic engine throttles £ 550 + vat Hydraulic folding butt plate single drum 1.92m £ 720 + vat (£910 2.10m) Double drum 2.1m £ 940 + vat

ALL WINCHES ARE SUPPLIED AS STANDARD WITH SMOOTH DOUBLE ROLLED CABLE FOR SMOOTHER WINDING ONTO THE DRUM, LESS FRICTION AND EASIER ON THE HANDS

Model 65G1.72 65G1.92 85G1.92 85G2.10 120G

Power 2X65G 2X85G

Pulling force

6.5 ton 6.5 ton 8.5 ton 8.5 ton 12 ton 6.5 ton

(per drum) 8.5 ton

(per drum)

**Cable Mt X MM

130 - 12 160 - 11 115 -13 125 -12 165/13 140/14

130 -12 115 -13

Weight (kg)

620 620 680 680 930 900 1000

Width) (mm)

1720 1720 1920 1920 2000 1920 1920

Power required (HP)

80+ 80+ 100+ 100+ 120+ 100+ 100+

Price £ 7,810 £ 8,030 £ 9,680 £ 10,010 £ 15,130 £ 13,200* £ 15,400

18

HYDRAULIC GEAR DRIVEN WINCHES

Pulling force – empty cable drum. kN 85 / 100

Pulling force – full cable drum. kN 50

Mean cable velocity m/s 0.48 – 0.9

Length of the cable (standard) 13 mm / 80m

Optional cable sizes 13 mm / 90m 12 mm / 105m

Recommended tractor power kW (HP) 60 (80)

Width mm 800 +

Depth mm 510

Height mm 600

Weight (without wire rope) kg 380 +

Operating RPM min-1 540-1000

Oil pressure bar 100-130

Quantity of hydraulic oil l

Model 1 X 85H 2 X 85H 2 X 100EH

Price With standard cable length

£ 9,020 £10,450 £11,280

The retail price is for the winch unit only. Fabrication of Butt plate or fitting to the

tractor is designed to suit the tractor and is therefore charged additionally.

19

Uniforest Savoy Mini Cableway system

20

BASIC PACKAGE : £15.270,00 Winch 85HS-1,8m without rope, upper, lower station, manual hydraulic pump and remote controls. Rope Ø 14mm: £3,00 /m Rope Ø 8 mm : £1,65 /m Additional equipment to upgrade the basic package: Mid station (shoe): £300,00 / pcs Tensioning device for rope: £430,00 Klem-plate - Screw plate for wire rope: £200.00 Pulley IF 6000: £210.00 Tightening belt 10t/20m: £200.00 /pcs Load belt 6t/3m: £45.00 /pcs NB. The new Savoy is being launched January 2017 NNB: Price includes delivery but not assembly or training.

Uniforest Savoy Mini Cableway system

21

Domestic Log Splitters

6 & 7 ton

Domestic log splitter Complete with wheels.

Ajustable table.

HDTHLS-PLUS

240 volt 13 amp

HDTHPLS6TE HDTHPLS7TE HDTHPLS7P

240 volt 13 amp 240 volt 13 amp Briggs & Stratton Engine.

TON Max Log mm HP

Price

+ vat

HDTHLS-PLUS 240vlt electric 6 520 £320

HDTHPLS6TE 240vlt Electric 6 1072 £470

HDTHPLS7TE 240vlt Electric 7 1040 4 £600

HDTHPLS7P Petrol engine 7 1040 6.5 £780

22

9 Ton Vertical Log Splitter Vertical log splitter for tractor hydraulics.

This is not a cheap and cheerful splitter. It has been built to the same

high standards of all our splitters and has the following features:

Full size cutting wedge.

Replaceable ’Oil-Lite’ slide bushings on cutting wedge.

Two speed controls.

Auto return,

Full safety guarding etc in compliance with all EC regulstions. * The perforamce depends on the hydraulic pressure and flow avaiable from the tractor. 2500psi will give arond 9

ton of force whilst a flow rate of 25 litre per minute will give a good operating speed..

TON Max Log HP Price

+ vat

COLSOV9PI

tractor hydraulics 9+* 550mm na 790

23

10-11 Ton Vertical Log splitter Complete with wheels.

OPTIONALS Four way Blade ( 11 ton model only) 95 Quick split wide blade ( 11 ton model only) 80

Fixed large table TON Max Log

Length cm HP Price

COLLASO100PI

tractor hydraulics. 10 53 NA 1,050

COLLASO100C

tractor PTO 10 53 NA 1,270

COLLASO100EM

240vlt Electric

Double pump

10 53 3 1,370

COLLASO100

Petrol engine.

Double pump

10 53 6.5 1,650

Adjustable height small table TON Max Log

Length cm HP Price

COLLASO100EM-TR Adjustable table 240vlt Electric. Double pump

10 55-78-110 3 1,540

COLLASO100-TR adjustable table Petrol engine. Double pump

10 55-78-110 6.5 1,980

24

12 ton Vertical splitters

2 speed & auto return.

Wheels for easy moving.

70cm Table height.

Optional Tubular table extension.

Options

Extension for table (now plate not tube) 200

Four way knife 130

TON Max Log mm HP Price

COLPROFY12PI tractor hydraulics 12 500 / 1,320

COLPROFY12PC tractor PTO 12 500 25 1,540

COLPROFY12EM 240volt electric

with double pump. 12 500 3 1,640

COLPROFY12SB petrol engine 12 500 9 2,190

with double pump.

25

UF Titanium Log Splitters, 13, 16, 20, 25 Ton vertical

Specification: 1090mm max log height. Two speed ram (Auto speed on 25T).

Auto return knife ram with override stop if you want to stop the knife from returning. Removable table, 56cm standard height, other heights by request.

LH side arm, RH timber lifter / side arm.

Adjustable knife return stop.

Model PTO 3 Phase

PTO and

3 phase

UF14 (13 ton) £2,420 £2,640 £3,020

UF18 (16 ton) £2,750 £3,240 £3,630

UF20 (20 ton) £3,130 £3,410 £3,790

UF25 (25 ton) £3,570 £3,850 £4,340

Extra’s UF14 UF18 UF20 UF25

Log table* £130 Na NA NA

Two height table

with side extension - £125 £125 £125

4-way knife £150 £160 £170 £180

Hydraulic winch &

remote - £1,150 £1,150 £1,150

Scissor grab - £100 £100 £100

PTO shaft SP4636 £100 SP4636 £100 SP13154 £150 SP13154 £160

26

ARB Splitter • Adjustable stroke and automatic return. • 14 / 18 ton splitting force with automatic 2 speed on 18 ton. • Log length capacity of 65cm or 110cm. • IVA compliant for high speed road transportation. • Petrol engine from 9 / 13hp with high speed dual hydraulic pump and large oil tank/s for maximum cooling and

long work period. • Folding Log deck. Allows debris to fall through for cleaner logs. Prevents logs falling on the ground so it is easy

to feed Billets / logs through again. • Optional drop on 4 way knife. • Prices start from £4,350 + Vat for the 14 ton 65cm stroke.

NB. Model shown is yard tow with drawbar removed. Road tow model has sprung axle, mudguards, lights etc.

27

Horizontal Log splitters: 14, 18, 23, 30, 40 & 50 Ton Adjustable stroke, Automatic return, automatic two speed (18 upwards) 2 way Blade. Tractor hydraulic or PTO. Petrol engines (14 to 23). 240volt (14T) & 380 volt (14 to 50T)

Standard log sizes of 700mm or 1100mm with option to

increase in 500mm increments.

NEW OPTIONS

Side mounted PTO for crane loading.

Remote hydraulic operation from cab.

28

SM Petrol engine model has a double hydraulic pump. All other models have single hydraulic pump as standard. Double pump is extra £250 + vat.

Ton Log mm HP Price A14 OR/650 PI Tractor 14 700+ / 1,650 A14 OR/650 C Tractor PTO 14 700+ 30 1,980

A14 OR/650 EM 240vlt Electric 14 700+ 3 2,700 A14 OR/650 ET 415vlt Electric 14 700+ 5,5 2,700

A14 OR/650 MS Petrol Engine double pump 14 700+ 9 2,810

A14 OR/650 SD Diesel Engine 14 700+ 12 4,010

A14 OR/1.060 PI Tractor Hydraulics 14 1.100+ / 1,760

A14 OR/1.060 C Tractor PTO 14 1.100+ 30 2,250 A14 OR/1.060 EM 240vlt Electric 14 1.100+ 3 2,860

A14 OR/1.060 ET 415vlt Electric 14 1.100+ 5,5 2,860 A14 OR/1.060 MS Petrol Engine double pump 14 1.100+ 9 2,920

A14 OR/1.060 SD Diesel Engine 14 1.100+ 12 4,120

A18 OR/650 PI Tractor Hydraulics 18 700+ / 1,980 A18 OR/650 C Tractor PTO 18 700+ 40 2,310

A18 OR/650 ET 415vlt Electric 18 700+ 5,5 2,910 A18 OR/650 MS Petrol Engine double pump 18 700+ 6 3,020

A18 OR/650 SD Diesel Engine 18 700+ 12 4,230

A18 OR/1.060 PI Tractor Hydraulics 18 1.100+ / 2,090 A18 OR/1.060 C Tractor PTO 18 1.100+ 40 2,470

A18 OR/1.060 ET 415vlt Electric 18 1.100+ 7,5 3,020 A18 OR/1.060 MS Petrol Engine double pump 18 1.100+ 13 3,350


A18 OR/1.060 CA Tractor PTO and 700Kg winch 18 1.100+ 40 4,450

29

Horizontal Log Splitters. 30 – 40 - 50 ton

Hydraulic 2-4 Way Blade, solid axle

Standard distance from pusher to blade is 110cm with option to increase in 500mm

increments. Double hydraulic pump fitted on all models as standard.

Model Ton Log mm HP Price A23 OR/1.060 PI Tractor Hydraulics 23 1.100+ / 2,750

A23 OR/1.060 C Tractor PTO 23 1.100+ 85 3,410

A23 OR/1.060 ET 415vlt Electric 23 1.100+ 7,5 4,180

A23 OR/1.060 SB Petrol Engine 23 1.100+ 13 4,400

A23 OR/1.060 CA Tractor PTO and 700Kg winch

23 1.100+ 85 5,390


Model Ton Log mm HP Price A30 OR/1.500 C Tractor PTO 30 1.500 85+ 6,820

A30 OR/1.500 ET 415vlt Electric 30 1.500 15 7,540

A30 OR/1.500 ET / C 415vlt Electric + PTO 30 1.500 15+85+ 8,030

A40 OR/1.500 C Tractor PTO 40 1.500 85+ 7,920



A50 OR/1.500C Tractor PTO 50 1.500 85+ 9,020



30

Drop on Cross-shaped knife for A14, A18 & A23 270

Oil cooler, 12 volt, flow up to 70 litres (A14 to A23) 500

Oil cooler, 12 volt, flow up to 110 litres (A30 to A50) 660

PTO shaft, SP4636, 360-520MM, 35HP 100

PTO shaft, SP13154, 660-1220MM, 47HP 150 PTO shaft, SP13157, 920-1440MM, 64HP 210 PTO shaft, SP13586, 960-1620MM, 95HP 230 Detached hydraulic pump 100

3-point linkage attachment (EM-ET-SB-SD) 330

Solid Axle upgrades

Solid axle for 14 - 18 – 23 models 270 Sprung axle for 14 - 18 – 23 models 380 Road Tow IVA compliant (A14-18 ONLY) additional cost to above 440 Sprung axle for 30 – 40- 50 ton models NA Machine mounted on legs

14 - 18 – 23 models 270

30 – 40 - 50 ton models FOC

Hydraulic side loading

For machine on ground A14/18/23 1,210

For machine on legs or axle A14/18/23 1,870

Hydraulic knifes & tables

14 / 18 and 23 ton, 2-4 way: 1,210 30 / 40 / 50 ton machines (deduction for no hydraulic knife): 770 30 / 40 / 50 6 way: 1,100 Folding end table after knife: 640

Hydraulic winch

All models 1,100

Remote control

All models (Tractor spool to two lever controls on splitter) 270

All models (Radio remote one channel IE. splitter) 2,150

All models (Radio remote two channel IE. splitter & knife) 3,240

Wireless control for winch on. 880

Extended splitting length (ram and bed)

A14-18 price per extra 500mm ram and bed length. 550

A23 price per extra 500mm ram and bed length. 880

A30 – 40-50 , price per extra 500mm ram and bed length 1,210

Log grippers for CA 190

31

SPECIAL ORDER

HORIZONTAL LOG SPLITTERS A 15 - 22 – 30 – 40 - 50 ton

32

Horizontal log splitters Contractor Pro 33 / 43

• 33 & to 43 ton splitting force, automatic return and 2/4 way knife • Log length capacity 125CM 35 & 45 ton.

PRO33-43 standard specification + Hyd 4 way

PRO33-43 Options 3 Phase electric motor kit to combine with PTO drive 1,800 2 speed valve for two speed splitting Pro 33 (standard on PRO43 330 Smaller pump for lower hp tractors (will reduce cycle times) 550 6 way knife 660 Table on 2-4 way knife cross blade 330 PTO shafts for all models PTO shaft, SP13154, 660-1220MM, 47HP 150 PTO shaft, SP13157, 920-1440MM, 64HP 210 PTO shaft, SP13586, 960-1620MM, 95HP 230

Model Ton Log Length

mm HP Price

PRO 33OR1.250C (Hyd adjustable 2/4 blade, log table, hyd loading) 33 1250 60 8,520

PRO 33OR1.250ET (Hyd adjustable 2/4 blade, log table, hyd loading) 33 1250 12.5 8,520

PRO 43OR1.250C (2 speed Hyd adjust 2/4 blade, log table, hyd loading) 43 1250 75 9,800

PRO 43OR1.250ET (2 speed Hyd adjust 2/4 blade, log table, hyd loading) 43 1250 12.5 9,800

33

Split-Fire Splitters

3 PT Hitch (Choice of short or tall top link bracket) Code Product Price (£) 2203 3PT PI 16 Ton 2 way knife 992 3203 3PT PI 20 Ton 2 way knife 1,150 3403 3PT PI 20 ton 2 + 4 way knife 1,350 4203 3PT PI 32 ton 2 way knife 1,500 4403 3PT PI 32 ton 2 + 4 way knife 1,800 Self-Contained (Excludes axels & Drawbar – see options) Code Product Price (£) 2265 16 Ton, 2 way knife, GX200 (5-5.8hp) & pump kit 2,100 3265 22 Ton, 2 way knife, GX200 (5-5.8hp) & pump kit 2,250 3465 22 Ton, 2+4 way knife, GX200 (5-5.8hp) & pump kit 2,460 4290 32 Ton, 2 way knife, GX270 (6.8-8.4hp & pump kit 2,950 4490 32 Ton, 2 + 4 way knife, GX270 (6.8-8.4hp) & pump kit 3,250 Options Price (£) PTO Kit (new cross bar with tank etc, PTO pump) 1,010 Log Lifter (includes additional DA valve) 495 5.0-10 wheel assembly on solid axle, draw bar 500 5.0-10 wheels, Suspension axles, mudguards, light board, IVA etc 950 Honda GX200 (5-5.8hp) & pump kit if ordered later 1,110 Honda GX270 (6.8-8.4hp) & pump kit if ordered later 1,467 Cat 1 3PT Hitch Upright (16" high) if ordered later 41 Cat 2 3PT Hitch Upright (24" high) 51

34

13 Ton Vertical trailed splitter

Specification: 1090mm max log height. Two speed splitting on the control levers. Double

hydraulic pump. LH side arm. Adjustable knife return stop.

Removable table, 56cm standard height, other heights by request

Auto return knife ram with over-ride stop if you want to stop the knife from returning.

Hydraulic tilt between transport and work.

Model Road Tow Honda GX270 engine

UFBMF14 (13 ton) £4,240 + vat

4-way knife £150

Timber lift £150

35

Hydraulic Cone Splitters

To fit onto 360 excavators, Back-hoes, Skid Steers, Loading Shovels, Tractor loaders, Cranes, Forwarding trailers and many other applications. Retail price includes mounting bracket, pins and hoses with blank ends as per picture ‘A’ above.

M1 – 4 Roli From: £ 2,600 + Vat. M1 – 10 Roli From: £ 3,980 + Vat. M1 – 4 K From: £ 5,930 + Vat. M2 – 4 K/M From: £ 8,700 + Vat M2 – 4 KS From: £ 9,845 + Vat. M2 – 4 S From: £ 10,460 + Vat. M3 – 4 S From: £11,720 + Vat. M5 – 4 S From: £18,980 + Vat.

Hardened Cone for M2 and M3S models From; £1,000 60,70,80,100,120,152,229,305,457mm augers From: £965-1,495.

Auger 120cm exten £640. Adaptor for auger mounting (not req for Roli) £1,495

Model Weight Kg

Machine Dimensions

cm H X W X D

Log length

Max Log

diameter

Recommended machine

weight Oil Flow Oil Pressure

M1 – 4.0/4.7Roli

90 85 x 32 x 36 1-2 meters 70 cm 1000 -3500 kg

15/50L 200 -230 bar

M1 – 10Roli 130 88 x 25 x 25 1-2 meters 90 cm 2500 -8000 kg 30/80L 170 -200 bar

M1 – 4.0/4.7K

135 110 x 36 x 45 1-2 meters 90 cm 2500 -7000 kg

30/80L 170 -230 bar

M2 – 4.0/4.7 M

170 110 x 36 x 45 1-4 meters 90 cm 3000 – 7000 kg

50/80L 170-230 bar

M2 – 4.0/4.7 KS

220 136 x 47 x 56 1-4 meters 100 cm 4000-10000 Kg

50/80L 170-230 bar

M2 – 4.0/4.7S

290 136 x 47 x 56 1-4 meters 110 cm 5000-15000 Kg

65/130L 170-230 bar

M3 – 4.0/4.7S

400 136 x 47 x 56 1-5 meters 150 cm 7000-20000 Kg

90/170L 170-230 bar

M5 – 4.0/4.7S

600 240 X 92 X

92 1-7 meters

200 cm 10000-25000Kg

120/250L 230-270 bar

A

36

Logging Saw Benches

Rocking trough logging saws with tungsten tipped saw blades.

* Requires a suitable 16 amp power supply and lead. It is not 13 amp.

OPTIONAL Extras

PTO shaft, SP4636s, 360-520MM, 35HP 100

Wheel Kit & Tow Bar (Only for COLSCM70SB-NT250I4) 440

Log grip handle for fitting to log trough (incl on COL models) 95

Replacement 600mm blade 180

All saws have Tungsten tipped 70cm blade. PTO shafts extra.

Pro models have trough extension, log grip, fixed log length guide, wheels.

Pro-Plus models have trough extension, safety cut lever + log grip, Blade guard, adjustable log length guide, trough front roller, bearings on the trough pivot, two handles, wheels, sawdust deflector.

Max Log OD HP Price £

COLSCM60LIGHT 240vlt* Electric direct drive, wheels and handle 23cm-9” 3 795

COLSCM70EMPD 240vlt* Electric direct drive, wheels and handle 28cm-11” 3 1175

COLSCM70EM 240vlt* Electric belt drive, wheels and handle 28cm-11” 3 1275

COLSCM70CPROET 415vlt Electric belt drive, trough ext, wheels, log cut length guide . 28cm-11” 5,5 1325

COLSCM70CPRO tractor pto drive 28cm-11” / 1150

COLSCM70CPRO-PLUS tractor pto drive 28cm-11” / 1350

COLSCM70CMSPRO-PLUS 9hp Petrol engine 28cm-11” 9 2150

COLSCM70MSPRO-PLUS-IVA Petrol Engine, IVA road tow . 28cm-11” 9 2400

COLSCM70CPRO-NT25014 Tractor PTO drive . 4mtr Telescopic conveyor tractor Hyd 28cm-11” / 2800

COLSCM70SBPRO-NT250I4 Petrol Engine, 4mtr Telescopic conveyor tractor Hyd 28cm-11” 13 3750

UFSCD/700 C/NT 4/250 PI Trough ext, log cut length guide, PTO drive,

4MTR Telescopic Elevator from tractor Hyd 30cm -12” / 3200

UFSCD/700 C/NT 4/250 ET 360vlt Trough ext, log cut length guide,

4MTR Telescopic Elevator 30cm -12” 5.5 +1. 3700

COLSCM70CMSPRO-PLUS

COLSCM70CPRO-PLUS

UFSCD/700 C/NT

COLSCM70MS IVA road tow

COLSCM70SB-NT250I4

COLSCM70EMPD

COLSCM60LIGHT

37

Band Saws

MODEL POWER &

SOURCE

Max cutting

Dimensions in cm

Table

Height Height cm

Weight Kg Price (£)

Height Length CM

SN440 EM 3HP 240vlt 29 43 91 182 x 150 1,690

SN440ET 3HP 415vlt 29 43 91 182 x 150 1,690

SN520EM 3HP 240vlt 38 50 91 202 x 200 1,940

SN520ET 3HP 415vlt 38 50 91 202 x 200 1,940

SN620EM 3HP 240vlt 42 61 92 217 x 260 2,180

SN620ET 3HP 415vlt 42 61 92 217 x 260 2,300

SN620C Tractor pto 42 61 92 217 x 270 2,300

SN620C-ET PTO +

3HP 415vlt

42 61 92 217 x 285 2,780

SN720ET 3HP 415vlt 48 70 93 237 x 320 2,750

SN720C Tractor pto 48 70 93 237 x 320 2,900

SN720C-ET PTO +

3HP 415vlt

48 70 93 237 x 335 3,430

OPTIONS

PTO shaft, SP4636s, 360-520MM, 35HP 100

Log holding / grip with sliding trough 340

Precision blade guide with rollers 70-80 130

Sold axle and tow hitch 650

Replacement 700mm blade 200

38

Logging Saw Benches with 15 ton Horizontal splitter

Rocking trough logging saws with tungsten tipped saw blades & 28cm diameter cut.

4 meter telescopic / folding conveyor. Long timber extension with rollers. Log grip handle and safety lever on

trough for two handed cutting.

15 ton horizontal splitter with adjustable 4 way knife.

Standard model:

PTO gearbox drives the saw via 3 belt drive & log splitter via pump + self contained hydraulic tank.

Conveyor belt runs from tractor hydraulics

Optional: PTO gearbox drives the saw via 3 belt drive & log splitter and conveyor via pump &self contained hydraulic

tank.

Price

COLCOMBY 2010 T.S.C.4. standard saw + conveyor + 15 ton splitter 4,780

COLCOMBY.500.002. Upgrade of internal pump etc for hydraulic conveyor. 460

PTO shaft 100

COLCOMBY.500.016 Wheel and drawbar kit for towing off road. 440

COLCOMBY.500.017 Hydraulic adjustable 4 way knife. 760

COLCOMBY.500.0120 Conveyor belt in 3 parts so you can reduce conveyor height 390

39

Log Conveyors

Telescopic conveyors

All models with tow bar and wheels.

They are supplied in a wooden crate for

partial home assembly.

Length Width HP Price

NT 4/250 PI Tractor Hydraulics 4 Mtr 250mm / 2250

NT 4/250 EM 240vlt Electric 4 Mtr 250mm 1 2350

NT 4/250 ET 415vlt Electric 4 Mtr 250mm 1 2350

NT 4/250 SB Petrol Engine 4 Mtr 250mm 9 3450













40

WP36 Firewood Processor

WP36TR

WP30TR

Optional

6 way knife

Standard

Slewing conveyor

Optional Timber loader

WP36IVA

41

WP36 Firewood Processor

Hydraulic in-feed and hydraulic conveyor out-feed. Technical data WP 36-8 WP 36-10

Gross cutting by chain saw, inch 36cm 36cm

Drive of chainsaw Hydraulic Hydraulic

Normal splitting action / minute, 30 cm length 1.5s 1.5s

Rapid splitting action / minute, 30 cm length 1.0s 1.0s

Splitting force in ton and knife type 8 ton, 2 & 4 way knife 10 ton, 2 & 4 way knife

Max. Stem diameter, cm 36cm 36cm

Max. Length of split wood 60cm 60cm

Conveyor belt width & length, cm 24cm X 4 mt 24cm X 4 mt

Slewing conveyor Yes Yes

Drive of conveyor hydraulic Hydraulic

Weight, kg 520kg 540kg

Power requirement, kW 7,5Kw 7.5Kw

Tractor linkage mounted models £

WP36TR 8 36CM max cut diameter, 60cm max log length, 8 ton splitting, 2-4 way splitting

knife, Power in-feed, 4mtr Folding & slewing conveyor, Linkage mounted, PTO driven

hydraulics. £ 8,250

WP36TR 10 36CM max cut diameter, 60cm max log length, 10 ton splitting, 2-4 way

splitting knife, Power in-feed, 4mtr Folding & slewing conveyor, Linkage mounted, PTO

driven hydraulics. £ 8,700

Road Tow models with full IVA approval.

WP36TR-IVA 8. 36CM max cut diameter, 60cm max log length, 8 ton splitting, 2-4 way

splitting knife, Power in-feed, 4 meter Folding & slewing conveyor, tractor linkage mounting,

PTO + 13hp Honda engine. Note ring hitch fitted for IVA compliance.

£11,440

WP36TR-IVA 10. 36CM max cut diameter, 60cm max log length, 10 ton splitting, 2-4 way

splitting knife, Power in-feed, 4 meter Folding & slewing conveyor, tractor linkage mounting,

PTO + 13hp Honda engine. Note ring hitch fitted for IVA compliance.

£11,900

WP30-36 Optional Extras. These can be retro fitted to standard PTO machines

PTO shaft,, 360-520MM: SP4636 £100

13HP Honda engine kit for WP30TR PTO model (standard on WP30IVA) £1,540

13HP Honda engine kit for WP36TR PTO model (standard on WP36IVA) £1,650

Electric start for petrol engine (not available for WP30 IVA due to weight) £880

3 Phase 7.5Kw electric motor (not available for WP30 IVA due to weight) £1,650

6 way knife in addition to standard 4 way: FAWP55306415 £470

8 way knife in addition to standard 4 way: FAWP200000118 £580

Hydraulic adjustment of splitting knife: FAWP 55306870 £1,210

Timber lifter, lifts full lengths onto in feed: FAWP55306400 £600

Two handle splitting levers for using splitter without saw: FAWP55306690 £280

Yard Tow kit (not for highway use) axle, hitch, stand (no mudguards or brakes) £750

Spare wheel for IVA axle kit or yard tow kit. £95

Linkage extensions may be required on some tractors when combining PTO and electric or petrol engine power source.

£220

Oil cooler kit for hydraulic system: FAWP55306680 £780

42

UNIFOREST TITAN 40-20 PROCESSOR

Titan 40-20 PTO with 2/4 way knife: £16,770 Telescopic 5mtr conveyor: £ ,390

200/60-R14.5 Wheels and tow bar: £ 1,100

Timber lift with adjustable length: £ 1,760

Hydraulic oil cooler: £ ,440

Knife options:

2/6 way: £ ,440

2/12 way: £ ,530

(200kN) – 20T

43

Billet Processors

PYTHON BILLET BUNDLER

Technical data Rotomat 5 (incl 6km/h Axle) Rotomat 4

Price with conveyor

3 Phase © : £14,250 PTO © : £14,500

CE : £15,500

3 Phase © : £10,750 PTO © : £10,800

CE : £10,200

Road Tow kit with own engine Diesel: £ TBA Petrol 13hp & PTO: £4,200

Price deduction for no Conveyor (net) 4.5M £2,100 5.5M £2,300

4.5M £1,900

PTO shaft SP4636S £ 90 £ 90

Variable speed control for conveyor £ ,260 £ ,260

Extra drums for different log lengths 20cm £ 350 50cm £ 450

20 & 50cm £ ,450 (Pre May 2015 models)

Dimensions L / W / H (cm) 350/240/180 320/170/160

Weight (kg) 1,500 990

Number of Billet Chambers 5 4

Max diameter wood Round wood (cm) 17 16

Maximum diameter of Billet wood (cm) 25 24

Possible cutting lengths (cm) 20/25/33/50 * 20/25/33/50 * (20 to 40cm**)

Max log length (cm) 120 100

Maximum number of cuts / minute

72 68

Power (kW) / voltage (V) 11/400 11/400

Tractor PTO HP**8 24 / 45 24 / 45

* standard: 25 & 33 cm. Optional: 20 & 50cm. ** May 2015 model.

**with tractors under 45HP a drawbar & wheel kit may be required

The Riko Rotomat Billet processor is a supper fast and efficient machine for cutting Billets into logs. The design ensures

simplicity of use whilst maintaining operator safety. The method of use is as simple as it is ingenious: there are 4 tubular

compartments built into a rotating drum, the billet lengths are simply dropped into each chamber as it rotates. As the drum

rotates each billet drops down a preset amount and is then held by a serrated grip arm. A Tungsten tipped circular saw

blade then cuts the Billet and the cut log is discharged into the area above the conveyor belt (Hydraulic slew from May

2015). As the drum continues to rotate the next Billet is cut and each Billet drops down further ready to be cut on the next

rotation. This process continues as the drum rotates and it is simply a case of placing another Billet in the tubular

compartments as the drum continues to rotate. The Riko Rotomat Billet Processor ensures:-

Fast & Simple Processing of Billets.

44

Python Billet Bundler

Also available with hydraulic tip and front loader mount +£330+vat

RIKO UK LTD & ALPINE TRACTORS LTD

Details Price Log Length 100 cm

£ 1,490

Volume 1 meter

Width 140 cm Height 120 cm Length 120 cm

Weight 200 Kg Polyester band 500m X 19mm £60 Band bobbin.

Portable with brake £60

Band clips 500 £50

Band tensioner incl Chain ratchet tensioner £110

45

TERMS AND CONDITIONS FOR THE SALE OF GOODS

1. Definitions: Buyer the person who buys or agrees to buy the goods from the Seller.

Seller means Riko UK Ltd or Alpine Tractors Ltd. Conditions the terms & conditions of sale as set out in this document & any special terms & conditions agreed in writing by the Seller.

Goods the articles which the Buyer agrees to buy from the Seller and listed on the sellers sales order, pro-forma invoice or invoice. Price the price for the Goods, excluding VAT and any carriage, packaging and insurance costs. 2. Conditions 2.1 These Conditions shall form the basis of the contract between the Seller and the Buyer in relation to the sale of Goods, to the exclusion of all other

terms and conditions including the Buyer’s standard conditions of purchase or any other conditions which the Buyer may purport to apply under any purchase order or confirmation of order or any other document.

2.2 All orders for Goods shall be deemed to be an offer by the Buyer to purchase Goods from the Seller pursuant to these Conditions. 2.3 Acceptance of delivery of the Goods shall be deemed to be conclusive evidence of the Buyer’s acceptance of these Conditions. 2.4 These Conditions may not be varied except by the written agreement of the Seller. 2.5 These Conditions represent the whole of the agreement between the Seller and the Buyer. They supersede any other conditions previously issued. 3. Price The Price shall be the price shown on the sales order or invoice at the time of payment in full or any order confirmation payment. Unless otherwise

stated on the invoice or sales order the price will be inclusive of VAT and delivery. 4. Payment and Interest 4.1 Unless otherwise agreed in writing by the supplier the buyer is to make a 20% order confirmation payment to order the goods with the balance due

cleared funds prior to delivery / collection. The goods referred to on the sales order or invoice will only be considered as ordered on receipt of the required order confirmation payment. The order confirmation payment is non-refundable but with written agreement from the seller may be transferable to an alternative order or sale.

4.2 The Seller reserves the right to charge interest on overdue invoices which shall accrue from the date when payment becomes due calculated on a daily basis until the date of payment at the rate of 10% per annum above the Bank of England base rate from time to time in force. Such interest shall accrue after as well as before any judgment.

4.3 The Buyer shall pay all accounts in full and not exercise any rights of set-off or counter-claim against invoices submitted by the Seller. 5. Goods 5.1 The quantity and description of the Goods shall be as set out in the Seller’s quotation. 5.2 Any alterations or additions to the buyer’s original order and the Seller’s original quotation may be subject to further invoicing whether or not the

Buyer has requested a written re-quotation. 6. Warranties .The warranty provided by the seller is as per the warranty offered by the manufacture and covers the repair or replacement of the product at the

seller’s discretion. Unless agreed with the seller in writing beforehand the product must be returned to the sellers premises, or there appointed agent, for all warranty repair work. The cost of returning the product to the supplier is not covered by warranty.

7. Delivery of the Goods 7.1 Delivery of the Goods shall be made to the Buyer’s designated delivery address. The Buyer shall make all arrangements necessary to take delivery

of the Goods on the day notified by the Seller for delivery. Should the buyer not be able to take delivery on the agreed date a further delivery will be subject to a further charge.

7.2 The Seller undertakes to use its reasonable endeavours to despatch the Goods on an agreed delivery date, but does not guarantee to do so. Time of delivery shall not be of the essence of the contract.

7.3 The Seller shall not be liable to the Buyer for any loss or damage whether arising directly or indirectly from the late delivery or short delivery of the Goods. If short delivery does take place, the Buyer undertakes not to reject the Goods but to accept the Goods delivered as part performance of the contract.

7.4 If the Buyer fails to take delivery of the Goods on the agreed delivery date or, if no specific delivery date has been agreed, when the Goods are ready for despatch, the Seller shall be entitled to store and insure the Goods and to charge the Buyer the reasonable costs of so doing.

8. Acceptance & return of the Goods 8.1 The Buyer shall be deemed to have accepted the Goods 24 hours after delivery to the Buyer. 8.2 The Buyer shall carry out a thorough inspection of the Goods within 24 hours of delivery and shall give written notification to the Seller within 7

working days of delivery of the Goods of any defects which a reasonable examination would have revealed. 8.3 Where the Buyer has accepted, or has been deemed to have accepted, the Goods the Buyer shall not be entitled to reject Goods which are not in

accordance with the contract. 8.4 Any costs associated with returning the goods to the seller, within the stipulated period above, shall be the sole responsibility of the buyer. 8.5 Any damage that occurs to the goods during return transport being returned shall be at the buyers liability and therefore chargeable to the buyer. 9. Title and risk 9.1 Risk shall pass on delivery of the Goods to the Buyer’s designated delivery address. 9.2 Notwithstanding the earlier passing of risk, title and full rights to access to the Goods shall remain with the Seller and shall not pass to the Buyer until

the amount due under the invoice for them (including interest and costs) has been paid in full. 9.3 Until title passes the Buyer shall hold the Goods for the Seller, shall store or mark them so that they can at all times be identified as the property of

the Seller and allow full rights to access for removal / collection of the goods. 9.4 The Seller may at any time before title passes and without any liability to the Buyer: 9.4.1 repossess and dismantle and use or sell all or any of the Goods and by doing so terminate the Buyer’s right to use, sell or otherwise deal in them;

and 9.4.2 for that purpose (or determining what if any Goods are held by the Buyer and inspecting them) enter any premises of or occupied or being used by

the Buyer. 9.5 The Seller may maintain an action for the price of any Goods notwithstanding that title in them has not passed to the Buyer. 10. Carriage of Goods

Unless agreed in writing by the seller Carriage will be chargeable on all sales dependent on weight of goods delivered and distance travelled.

46

Depots Contact Details

RIKO UK LTD www.riko-uk.com

Southern Office:

Inverallen Yard, Forge Road, Kingsley, Hampshire, GU35 9LW

Telephone: 0044 (0)1420 487300 Email: [email protected]

Yorkshire Office:

Unit 10, Spruce & Hawe, Blind Lane, Tockwith, YO26 7QJ.

Telephone: 0044 (0)1423 359419 Email: [email protected]

South Wales Office: Cold Blow, Narbeth,

Pembrokeshire, SA67 8RR Telephone: 0044 (0)7538 379411

Email: [email protected]

North Wales Office: Cyffylliog, Ruthin,

Denbighshire, LL15 2DP Telephone: 0044 (0) 1824 538 638

[email protected]

All prices, specifications and details are subject to change without notice.

Prices are only binding on receipt of a written quotation.

http://www.riko-uk.com/

mailto:[email protected]




Documents

zz - Riko UK · PDF filezz . 2 Contents Forest-Master Mulching Flails ... Forest blade Grab R54836500, with hydraulic top beak, Euro quick hitch standard, other hitch options available