ZW-6 series

WHEEL LOADER

Model Code: ZW370-6Engine Power: 386 HPOperating Weight: 73,790 lb. Bucket ISO Heaped: 6.5 – 8.1 yd³

Preliminary

Photographs are representations only. Actual options will vary by model and application

MODEL ZW370-6

2

SPECIFICATIONS

BUCKET DATABucket Capacity Heaped (yd3) 7.3

Maximum Dumping Clearance ft-in 10' 8 1/4"

Dumping Reach ft-in 4' 10 1/4"

Bucket Hinge Pin Height ft-in 15' 3 1/2"

Breakout Force lbs. 51,930

Bucket Tilt Back Angle (carry) degrees 50

Length ft-in 31' 11 3/4"

Height ft-in 12' 2 3/4"

Width (outside tire) ft-in 10' 6 3/4"

Width (outside bucket) ft-in 11' 3 3/4"

Wheelbase ft-in 11' 9 3/4"

Clearance Circle ft-in 51' 6"

Minimum Ground Clearance ft-in 1' 5 1/4"

Full Articulation Angle degrees 37

Operating Weight lbs. 73,790

Straight Tipping Load lbs. 55,450

Full Turn Tipping Load lbs. 48,300

1. What is the equivalent model in the KCM loader? 95Z7 T4F

2. What are the differences in the KCM versus the HITACHI version of this model?

• Most notably, the branding. The machines have gone from KCM Gold to HITACHI Taxi Yellow (Orange). You will also see HITACHI logos, decals and plates replacing KCM.

• Now Standard

– Deluxe heated seat– Engine block heater– Prepped for Loadrite scale– Ride control

Specifications based on ROPS Cab, Counterweight, GP BOCE Bucket, Mate-rial Density of 2800 cu.yds., Operator, Full Fuel and Lubricants, Standard Tire: 29.5R25 (L-3). Assembled in the U.S.

ENGINE AND TRANSMISSIONEngine Make / Model Isuzu 6WG1

Horsepower gross / net 389/386

Liter Engine L 15.7

Number of Cylinders # 6

Alternator Amps amp. 110

Emission Level design Tier 4 Final

Tier 4 Technology SCR

Transmission Type Planetary

Speeds Forward / Reverse F / R 4F/3R

SYSTEM FILL CAPACITYEngine Coolant Capacity (gal) gal. 18.2

Fuel Tank Capacity (gal) gal. 115.7

Axle Oil Capacity Front / Rear gal. 25.1/25.1

Hydraulic Oil Capacity gal. 47

HYDRAULICS/STEERING/AXLE SYSTEMSHydraulic Cycle Time sec. 11.6

Main Hydraulic Pump Type type Piston

Differential Gear type Torque Prop.

Linkage type Dual Z Bar

Brake Location Mid-Mount

TIRESTires Std. 29.5R25 (L-3)

Tires Optional 29.5-25-28PR (L-3)

FREQUENTLY ASKED QUESTIONS

• Specs are now standardized on the QDM machines. Please reference the HCMA Price List for details.

STANDARD EQUIPMENT

3

EQUIPMENT

Standard and optional equipment may vary by country, so please consult your Hitachi dealer for details.

OPTIONAL EQUIPMENTAutolubeBelly guard, transmissionBolt-on cutting edge & segmentsBucket teethCounterweight, refuseHID work lightsHigh lift boom armHydraulic system, 3 spool valveJoystick steeringLED work lightsQuick coupler & attachmentsSingle lever hydraulic control w/multifunction grip

ENGINEAir cleaner, double element

Auto idle shut down

Cold start (glow plug)

Cooling fan, automatic reversible

EGR System

Fuel filter (Main)

Fuel pre-filter, w/water separator

Isuzu 6WG1 diesel engine

Pre-cleaner (turbine type)

SCR catalyst and DOC

VGT (variable geometry turbocharger)

Work mode selector

POWERTRAINAutobrake

Brakes, service

Enclosed wet disc

Dual system

Mid mounted

Brake, parking

Spring applied

Oil pressure released

Wet disc type

Differential, torque proportioning type (F/R)

Down-shift switch

Drive shafts, low maintenance

F-R direction selector (2-column mounted/ console mounted)

Lock-up torque converter

Quick Power switch

Transmission, automatic w/load sensing system.

Transmission declutch (3-position L/H/Off)

Transmission mode selection (3-position AUTO1/MAN/AUTO2)

Universal joints, sealed

CABROPS cab: enclosed cab with sound suppression, front & rear wipers and washers, two rear view and side mirrors, tinted glass, front hinge doors, sliding side windows.

Accessory outlet, 12v

Adjustable armrest/console, (fore/aft sliding)

Air conditioner/heater/pressurizer

AM/FM/WB radio with AUX input

Ashtray

Cab dome lamps (2)

Cigarette lighter, 24V

Coat hook

Cup holder (2)

Floormat, sweep-out

Prepped for Loadrite Scale

Retractable seat belt (3-inch)

ROPS/FOPS certified

Seat, deluxe heated w/TLV suspension (DLX8500)

Steering column, telescoping and tilting w/quick-release pedal

Steering wheel

Storage box (heated/cooled)

Storage tray

Sun visor

HYDRAULIC SYSTEMBoom kick-out, dual (operator adjustable in cab)

Bucket positioner (horizontal)

Control lever, dual, pilot-assisted

Control lever lock (electric)

Control valve, 2-spool, parallel and tandem control

Pump, variable displacement, load-sensing

Ride control w/load sensing valve and automatic shut-off

Steering, pilot

System; open-center, high-pressure, load-sensing

ELECTRICAL24-volt electrical system

Back-up alarm

Batteries (2), 12V, 1,300 CCA

Battery disconnect switch

Camera, rear-view

Converter, 12V/15 Amp

Horn, dual electric

Instrument panel, LCD, color

Lights:

2 Headlights (halogen)

2 Forward working lights (halogen)

4 Rear working lights (halogen)

2 Stop/tail/backup (LED)

Turn signal w/4-way flashers/marker

ALARMS, GAUGES, INDICATORSAlarms (visual & audible)

Aftertreatment deviceAftertreatment device regeneration systemAir cleaner element Auto brakeAxle oil temperatureBattery discharge warningBoost temperature riseBrake oil low pressureCAN network systemDEF/AdBlue tank level/quality/systemEngine oil low pressureEngine troubleEngine warningExhaust gas temperatureFuel filter restrictionFuel filter (water in fuel)Fuel temperatureHydraulic oil levelHydraulic oil temperatureIntake air temperatureMain pump oil pressureOverheat (engine coolant)Transmission filter restrictionTransmission oil pressureTransmission oil tempTransmission warning

Gauges DEF/AdBlue tank levelEngine coolant temperatureFuel gaugeSpeedometerTachometer

Indicators Auto idling stopAftertreatment device regenerationAir conditioner displayBoom kick-out, dualCold startControl lever lockDeclutchECO-Operating StatusFan reverse rotationF-N-R SelectionF-N-R Switch enableHigh beamParking brakeShift holdTime/Operating hour/ODOTraction ControlTransmission mode and statusTurn signal w/4-way flashers/MarkerWork lightWork mode (Normal, Power)

OTHERSArticulation locking bar

Counterweight

Drawbar

Fenders, front, w/mudflap

Global e-service, telematic monitoring system (GSM-version w/4 yrs. service)

Ladders, inclined

Lifting eyes

Linkage pins, HN bushing

Neutral safety start

Rear grill, hinged

Steps, rear

Vandalism protection

Z-bar loader linkage

Hitachi Construction Machinery (HCM) was established in 1970, when Hitachi, Ltd. spun off its construction machinery division. Currently, there are 44 companies that comprise the HCM Group providing total solutions for customers in the heavy construction equipment industry. HCM continues to grow as a strong, global, competitive enterprise.

Fast forward to 2010. A joint venture with Hitachi Construction Machinery Group and Kawasaki Heavy Industries was entered into to further develop the global scope of the wheel loader product line. This relationship combined the huge technological and manufacturing resources of Kawasaki Heavy Industries and Hitachi Construction Machinery Group. This effort has resulted in a very productive, reliable, and cost-effective product.

In 2016 Hitachi Construction Machinery bought 100% of KCM Corporation’s stock transitioning to KCMA Corporation. In 2018 HCM took the reins transitioning KCMA Corporation to Hitachi Construction Machinery Loaders America Inc., furthering their commitment to the North American market by introducing the HITACHI brand wheel loader line, offering outstanding parts availability, an unmatched factory component exchange program, customer and dealer training programs, and a wide range of services and programs.

With manufacturing facilities in Banshu, Japan; Ryugasaki, Japan, and Newnan, Georgia Hitachi Construction Machinery Loaders America has the experience and technology to design, engineer, manufacture, and service your next wheel loader. The Hitachi Construction Machinery Loaders America Inc. team is focused on wheel loaders. As a subsidiary of one of the largest construction machinery companies in the world, Hitachi Construction Machinery Loaders America Inc. is securely poised as your go-to source in the North American wheel loader market.

Part #ZW370-6 INTRO (01/2018)

Hitachi Construction Machinery Loaders America Inc. | HitachiCM.us

• 13 Models• 30 HP – 531 HP

A FULL LINE OF WHEEL LOADERS

REPUTATIONS ARE BUILT ON IT