Upload
vanlien
View
213
Download
0
Embed Size (px)
Citation preview
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
1Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
Zilog and EE-SGI Present…
ePIRTM
The Next Generation ofPIR Motion Detector
Technology
(Over View)
May 2008
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
2Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
The ePIRTM Statement
ePIRTM is a revolutionary technology used for passive infrared (PIR) based motion detection.
ePIRTM is a technology that has significantly better reliability & performance than (high end current) Digital PIR detectors.
• Provides a dramatic improvement in both sensitivity and stability (false alarm & pet immunity).
• Meets or exceeds all applicable standards (present and proposed).
• Enables additional features without additional cost.White Light ImmunityAuto LEDReal time Diagnostics (self test) and more…
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
3Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
Traditional PIR Detectors
Traditional PIR’s are a commodity sold largely on price
• Differentiation from competitors is difficult
Designs are mature in nature
• Little room for improvements
Inherent limitations remain• High component count (low MTBF)
• Bulky electrolytic capacitors required
• Time consuming to assemble and test
• Band-Aids applied to overcome design pitfalls
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
4Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
What makes ePIRTM possible?
New MCU product families with advanced capabilities have allowed a revised look at the overall PIR detector design
Unique software techniques have been developed that overcome previous limitations
This “fresh” look has produced a revolutionary step in PIR detector technology called the ePIRTM with Sigma-Delta Technology
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
5Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
Advanced new Zilog Z8 XP MCU allows the hardware to be greatly simplified
Supports powerful new software techniques developed by EE-SGI
The ePIRTM Technology
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
6Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
Traditional – Block Diagram
PyroSensor
Power SupplyFilter for Pyro
AC CoupledGain Stage
BandpassFilter
DecisionEngine
Output
Pulse Count orNormal / Harsh
White LightImmunity
EMI / RF Shield / Extra Components
EMI / RF Immunity
PowerSupply
TemperatureCompensation
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
7Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
ePIRTM – Block Diagram
PyroSensor
DecisionEngine
Output
White LightImmunity
(No added cost)
EMI / RF Immunity(No added cost)
PowerSupply
EnvironmentalCompensation(No added cost)
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
8Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
PCB Comparison
Top SideBottom Side
Traditional ePIRTM Traditional ePIRTM
Fewer components means simpler layout and no electrolytic capacitors
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
9Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
ePIRTM – Sensitivity
Based on statistical information, not signal amplitudeTypically exceeds comparative benchmarksCreep detection well bellow 0.1 MPSSpeed detection exceeds 5 MPSExcellent delta temperature performance• Performs better near 35C ambient temperature (R.B.T.)
Sensitivity controllable in ePIRTM software• Supports user selectable sensitivity for the application• Not required to counter false alarm problems
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
10Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
ePIRTM – Stability
Extremely stableExceeds comparative benchmarksTested under worst case conditions• Maximum sensitivity• Minimal pulse count setting• Minimal pet immunity setting• Cycling temperatures• Variable sunlight and other factors
Field data confirms internal test resultsDramatic improvement in false alarm immunity
Increased stability AND lower system cost!
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
11Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
Walk Test Comparison(in house facility)
Traditional Design ePIRTM Design
5 ft 10 ft 15 ft 20 ft 25 ft 30 ft 3
+10
+20
+30
-10
-20
-30
-40
-50
-60
Buiding Wall
Buiding
Distance from detector
Angle offset from detector base
Detector Model : 937Detector Manufacturer : EE/LonghornDate of Test : Feb 10th 2006
Detector Hight : 7 ftRoom Temperature : 23 degrees C
40 ft
50 ft
60 ft
70 ft
80 ft
30 ft
20 ft
10 ft
Subject Size: 145lbs @ 5"7"”
Subject movement detected
No detection
Subject movement not always detected
5 ft 10 ft 15 ft 20 ft 25 ft 30 ft 3
Buiding Wall
Buiding
Distance from detectorDetector Model : EE937A Dual ElementDetector Manufacturer : LonghornDate of Test : February 13th 2006
Detector Hight : 7 feetRoom Temperature : 23 degrees C
+10
+20
+30
-10
-20
-30
-40
-50
-60
40 ft
50 ft
60 ft
70 ft
80 ft
30 ft
20 ft
10 ft
Subject movement detected
No detection
Subject movement not always detectedSubject Size: 155lbs @ 5"7"”
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
12Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
ePIRTM Pet Immunity
Pet immunity tested to over 48 Kg• Production product can be rated to 40Kg
Consistently exceeds comparative benchmarksMinimum pet immunity (15 to 20 Kg) inherent without any degradation of catch performanceAlternate lens or masking not requiredePIRTM utilizes sharp frequency discrimination and waveform shape analysis
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
13Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
ePIRTM White Light Immunity
Exceeds 10,000 Lux White Light Immunity• Pulsed• Swept• Continuous
Target motion still detected under strong white light• Can not be blinded• KEY requirement for outdoor motion detection!
No filtering or additional components required• Advanced software analysis with inputs from…
Ambient light level obtained from LED in “reverse mode”Pyroelectric sensor DC offset and signal
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
14Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
ePIRTM – AUTOLED Feature
The unique method of enabling Walk Test• LED jumper now ON and AUTO (instead of OFF)• LED = ON works the same way (LED always active)• LED = AUTO controls the LED automatically
LED is normally off until action takenLED (for walk test) is enabled by shining light on detectorEliminates removal of the detector cover for walk testing
Guarantees LED will be disabled for normal operationAUTOLED function can be customized as required
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
15Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
ePIRTM – Approvals
EMC • EN50130-4 • EN61000-6-3• 47 CFR, FCC part 15:06 Sub B• CISPR 22• ICES-003
Product Safety• EN 60950-1 (CE mark)
ePIR expected to meet or exceed 6 GHz requirement for EMC radiated immunity without additional hardware or cost• Current requirement = 2 GHz (effective Sep 2007)• Future requirement = 6 GHz (required in 2 to 4 years)
SYSTEMSGROUPInc.
SYSTEMSGROUPInc.
16Worldwide Patents Pending. Zilog & EE-SGI All Rights Reserved.
The ePIRTM Advantage
Significantly improved performance & reliability Can drop into existing plastics & opticsSuperior sensitivity and range Extreme false alarm immunityEliminates electrolytic capacitorsExceptional pet immunity – Tested to 48KgIntegral white light immunity (without cost)• Exceeds 10,000 Lux White Light Immunity
Pulsed / Swept / ContinuousDetector remains non-blinded
AUTO LED feature (without cost)Full environmental compensationMeets the current 2GHz EMC standard• Projected to meet future 6GHz standards as well
Outperforms digital solutions at an analog price!