ZEPHYR Model: Z Ceiling Fan - usair-eng. · PDF file ©PENNBARRY 2009 PENNBARRY 3 TM Ceiling Exhaust Fans Z e p h y r Introduction Zephyr › Low Sound For sound critical applications,

TM

M O V I N G Y O U R W A Y

Z09

ZEPHYR Model: ZCeiling Fan

WWW.PENNBARRY.COM

©PE

NN

BAR

RY 2

009

PENNBARRY 1

TM Ceiling Exhaust Fans

Zephyr

Table of Contents

PennBarry reserves the right to make changes at any time, without notice, to mod-els, construction, specifications, options, availability, etc. This bulletin illustrates the appearance of PennBarry products at the time of publication. To view the latest updates, visit PennBarry at www.pennbarry.com.

› UL and CSA CertificationZephyr fans carry the UL labels, UL705, (ZACT), File # E28413 & UL507, (GPWV), File # E255450. The Z1, ZL1, & ZL2 are not UL705 certified. The Z15 is not UL507 certified.

Zephyrs are also certified by the Canadian Standard Association (File #LR13309).

Introduction ..........................................................................2

Features & Benefits .............................................................3

Accessories .........................................................................5

Zephyr .................................................................................8

Zephyr with TDA Option ......................................................9

Large Capacity Zephyr ........................................................10

Zephyrette & Zephyr Jr. .......................................................11

Zephyr Transfan ..................................................................12

Zephyr Ceiling Fans with Light ............................................13

Fan Curves ..........................................................................14

Engineering Specifications ..................................................15

Limited Warranty .................................................................IBC

› Zephyr

Model: Z3 - Z12Static pressure up to 0.75 in. wg.•

Flow capacity up to 1566 CFM•

Model: Z3 - Z12 (TDA)Static pressure up to 1.5 in. wg.•


Model: Z14 & Z15Static pressure up to 1 in. wg.•


Model: Zephyrette & Zephyr Jr. (ZT & ZJ1)Static pressure up to 0.75 in. wg.•


Model: Transfan (TF-8)Static pressure up to 0.20 in. wg.•


Model: Z1Static pressure up to 0.5 in. wg.•


Model: ZL1 & ZL2Static pressure up to 0.5 in. wg.•


WWW.PENNBARRY.COM

©PEN

NBAR

RY 2009

2 PENNBARRY

TM

Ceili

ng E

xhau

st F

ans

Zephyr

› Zephyr Z & Z-TDA ModelsThe Zephyrs, model Z are quiet operating ceiling exhaust fans. Some selections are available with sound ratings below 1 sone. There are 15 models that cover a wide range of performance. The units are easily field convertible to change the discharge orientation from right angle to top discharge. They are also easily field convertible from ceiling (model Z) to inline (model Z-TDA) installations. There are multiple sizes that utilize 2 speed motors that allow these units to cover an even greater range. All motors are equipped with thermal overload protection as standard. The units utilize quick access wiring to make them easy to install. Many of the units are offered with variable speed motor control which will allow for easy balancing. All models are AMCA Air and Sound rated and UL705 and UL507 listed.

› Large Capacity Zephyr FansPennBarry Zephyr fan models Z14 and Z15, are designed to produce high volumes of air at low noise levels. Fans can be used for general ventilation and exhaust applications. These larger capacity fans will accommodate single or multi-room ventilation and can be installed above the ceiling. The units are AMCA Air certified and UL705 listed. The Z14 is also UL507 listed.

› Zephyrette & Zephyr Jr. The Zephyrette ZT and Zephyr Junior ZJ1 are quiet operating low profile Zephyrs. They can be installed into very shallow ceilings where other units will not fit. A speed controller is available for both models for precise system balancing and energy conservation. The units come standard with thermally protected motors, AMCA Air rated and UL705, UL507, and CSA listed.

› Zephyr Transfan The Transfan is a room-to-room transfer fan. It has an adjustable wall sleeve for varying wall thicknesses and fits easily between wall studs or ceiling joists. It is supplied with a built in variable speed motor control. It is AMCA Air rated and UL705, UL507, and CSA listed.

› Zephyr Ceiling Fan The Zephyr Z1 is for very low flow requirements. The unit comes with a white polymeric grille and utilizes a quiet centrifugal blower wheel. The housing is made from rugged steel and has built in mounting brackets. The exhaust connection is a 4” polymeric round duct connector that has a durable damper that eliminates backdrafts and produces no metallic clatter. The Z1 is UL507 listed for use over bathtubs and showers when connected to a GFCI protected branch circuit. The Z1 is AMCA licensed for Sound and Air performance.

› Zephyr Ceiling Fans with LightThe Zephyr Light models ZL1 and ZL2 come with a maximum of 100 watt incandescent lighting (bulb not included). The units are supplied with a totally enclosed motor that utilizes sealed bearings. The units come with a white polymeric grille that has an unbreakable light lens. They utilize quiet centrifugal blower wheels with plug in receptacles for the fan and light. The housing is made from rugged steel and has built in mounting brackets. The exhaust connection is a 4” polymeric round duct connector that has a durable damper that eliminates backdrafts and produces no metallic clatter. The models are UL507 listed for use over bathtubs and showers when connected to a GFCI protected branch circuit. The units are AMCA licensed for Sound and Air performance.

ZephyrIntroduction

General Information

Zephyr

Zephyr TDA

Zephyr Z14 & Z15

Zephyrette& Zephyr Jr.

ZephyrTransfan

Zephyr Z1

ZephyrZL1 & ZL2

WWW.PENNBARRY.COM

©PE

NN

BAR

RY 2

009

PENNBARRY 3

TM

Ceiling Exhaust Fans

Zephyr

IntroductionZephyr

› Low SoundFor sound critical applications, the Zephyr S series delivers the lowest sound ratings. All Zephyrs feature acoustically insulated housings, custom designed blower and motor pairings, motors mounted on vibration isolators, and for all but the smallest Zephyr–Z3H, dual inlet blowers.

› High Static PressuresWhen higher static pressures are encountered, the Zephyr H series fans excel. Faster RPM allow these fans to better sustain airflow as static pressure increases. This makes them well suited for inline applications.

› HousingsHousings are fabricated of galvanized steel. Acoustical insulation is used to minimize sound.

› EasyTap Speed SelectionSelected Zephyrs (Z6S/H, Z8S/H, and Z10S/H) are provided with dual speed motors designed to run at nominal speeds of 1050 and 1550 RPM. By simply changing one wire tap, a fan’s speed can be switched. This ability to alter speed and air flow allows on the spot adjustments to deal with unforeseen circumstances. Systems deficiencies can be accommodated in the field quickly and without the added cost of replacing a fan.

› MotorsAll units have permanently lubricated motors manufactured to PennBarry’s exacting specifications. Motors feature built in overload protection and plug in disconnects.

› GrillesConstructed of attractive molded white plastic, aerodynamically designed grilles feature an 85% free area. To make for easy removal and cleaning, the grilles are held in place with spring clips. An optional metal face grille with a white finish is available.

› WheelsWheels are dynamically balanced and performance matched with the motor. On models Z5H and larger, dual inlet blowers are employed to minimize sound levels.

› Quick Access WiringAccess to the motor leads is through a panel in the side of the unit; there is no need to remove the power pack. However, if the need to remove the power pack ever arises, a quick connect plug makes the process simple and easy.

› Field ConversionThe Zephyr cabinet is designed for quick transition from right angle discharge to top discharge or into an inline configuration. Simply remove two (or four depending upon model) sheet metal screws, switch positions of the access panel and top panel, re-attach screws, and a right angle discharge becomes a top discharge fan.

There is no need to remove the power pack. The blower remains oriented in one position while the panels change places. The transformation to an inline fan is accomplished by the replacement of the grille with an access panel. Again, only two (or four) screws are involved in the process.

› Changing from Right Angle to Top Discharge

1. Remove screws. 2. Remove access panel. 3. Rotate access panel 90°. 4. Re-install screws.

› Changing from Ceiling Mount to In line Configuration

1. Discard grille and remove access panel screws.

2. Remove access panel. 3. Install optional TDA panel and four screws.

4. Re-install access panel and screws.

Features & Benefits

WWW.PENNBARRY.COM

©PEN

NBAR

RY 2009

4 PENNBARRY

TM

Ceili

ng E

xhau

st F

ans

Zephyr

Zephyr

Introduction

Installation

ModelGrille TDA Panel

K L X Y ZZ3,5,6 11” 13 3/4” 10” 6” 1 5/8”Z8,81 13 1/4” 14 7/8” 10” 8” 1 9/16”Z10 15 1/2” 19 3/8” 14” 10” 2”

Z12, 101, 102, 121 15 1/2” 25” 20” 10” 2”

K

L

Z

X

Y

› Optional Steel GrilleWhen the design calls for a more architecturally appealing grille, an optional steel grille is available. It features an attractive perforated steel design with overall white finish. (Not available for Z1, ZL1 & ZL2).

› Inline Conversion (TDA) KitAdapter panel with integral duct flange allows conversion from ceiling fan (RA/TD) to inline fan (TDA). Adapter can be installed to provide for straight through (Inline) or 90º (Right Angle Inline) application. Use of the fan in Right Angle configuration allows the fan to replace an elbow in the duct system. This eliminates the pressure loss of the elbow and simplifies the installation for the contractor.

K

L

Z

X

Y

› RA (Right Angle) Installation › TD (Top Discharge) Installation

› TDA-RA (In-Line) Installation › TDA (In-Line) Installation

WWW.PENNBARRY.COM

©PE

NN

BAR

RY 2

009

PENNBARRY 5

TM


Zephyr

Zephyr

Introduction

MODEL SL20

MODEL WC10

For Use With Model A(Throat) Dia B C E SQ F H L-Dia Damper SQ

Z1, ZL1, ZL2, ZT, ZJ1, Z3H, Z5H, Z6S/H WCF06 7” N/A 3 1/2” 16 7/8” 8” 11 1/2” 12” NA

Z8S/H, Z81S, Z10S/H WCF08 9” N/A 5 1/2” 21 1/4” 8” 13 1/2” 18 1/2” NA

Z101S, Z102S WCF10 11” N/A 5 1/2” 21 1/4” 10” 15 1/2” 21” NA

Z12S, Z121S WCF12 13” N/A 7” 24” 10” 17” 25” NA

Z102H, Z12H WCF14 15” N/A 7” 28” 10” 17” 28” NA

Z14, Z15 WCF20 21” N/A 10 1/2” 32” 12” 22 1/2” 37” NA

Z1, ZL1, ZL2, ZT, ZJ1, Z3H, Z5H, Z6S/H WCC06 7” 1 3 1/2” 15” 4” 8 1/2” 12” 8 3/4”

Z8S/H, Z81S, Z10S/H WCC08 9” 1-1/2 5 1/2” 18 1/2” 4” 11” 18 1/2” 11 1/4”

Z101S, Z102S WCC10 11” 1 1/2 5 1/2” 18 1/2” 4” 11” 21” 11 1/4”

Z12S, Z121S WCC12 13” 2 7” 20 1/2” 4” 13” 25” 15 3/4”

Z102H, Z12H WCC14 15” 2 7” 24 3/4” 4” 13” 28” 15 3/4”

Z14, Z15 WCC20 21” 2 10 1/2” 28 1/2” 5 1/2” 18” 37” 19 3/4”

› Roof Cap Dimensional Data

Roof Accessories

ESQ

ADIA

H

F

LDIA

C

LDIA

H

C

F

B

ADIA

ESQ.

› WCC Roof Cap (Curb Mounted) › WCF Roof Cap (Self Flashing)

› Roof CapsThese spun aluminum, rustproof, seamless vents provide a discharge cap for flat roof mounting. Unobtrusive and furnished with integral bird screen, they are designed for simple, safe flashing directly to the roof. Mounting flanges are also available turned down as cap flashing when installation on roof curbs is desired. See the PennBarry Weathercap Bulletin for more information.

› Sloped Roof CapsCaps are available for sloped roof applications. Minimum height model SL20 is durable and has a backdraft damper. Models WCF/WCC10, 12, 14, 20 are suitable for mounting on sloped roof 4” in 12” pitch or less.

› Wall CapsInconspicuous but efficient wall outlets for the Zephyr fans are provided through the use of the Wall Cap. Architectural values are not diminished by this tastefully designed accessory. When properly installed, it is both watertight and effective.

WWW.PENNBARRY.COM

©PEN

NBAR

RY 2009

6 PENNBARRY

TM

Ceili

ng E

xhau

st F

ans

Zephyr

Brick Vent Model Recommended Zephyr Model H H1 S

B120 Z101, Z12, Z121, Z102, Z14 24” 24” 2”

B150 Z15 30” 30” 2”

B68 Z3, Z5, Z6, Z8, Z81 16 1/2” 4 3/4” 4”

B100 Z100 16 1/2” 7 3/4” 4”

› Brick Vent Model Recommendations

› Brick VentsSized to replace multiples of standard size brick or concrete block. Made of extruded aluminum with insect screens, storm proof features and a protective finish, they are superior vents and ideal for installation in masonry walls.

MODEL B68 MODEL B100 MODEL B120 / B150

› 277 Volt TransformerTo meet local requirements 277V transformers are available for all Zephyrs. The transformers are step-down and will step the voltage down to 120V. Shipped loose for field installation.

› Motion SensorFor applications where automated operation of the fan is required, a motion detector can be used to turn the fan on or off. The sensor features full scanning capabilities and can be placed anywhere within the room. The sensor also offers adjustable shutoff feature with delays of up to 15 minutes.

› Two Speed SwitchA PennBarry Exclusive. The decorator, three position center off, two speed switch is designed to work with PennBarry’s EasyTap Dual Speed Motors (models Z6S/H, Z8S/H & Z10S/H). Adjust from low (S) to high (H) with the flick of a switch. Manually adjust for changes in room and static pressure conditions.

Zephyr

Introduction

› Lek-Trol™ Speed ControllersLek-Trol™ Speed Controllers permit unlimited air control. They use solid state “quadrac” circuitry and insure not only complete speed range control and extra long life reliability but also a savings in the cost of electricity. Lek-Trols™ can be installed and connected within the fan casing, permitting precise system balancing.

› Pilot LightThis amber colored light easily snaps into any opening in the Zephyr grille. The light will indicate when the fan is in operationand is ideal when fan is not interlocked with lights.

Accessories

WWW.PENNBARRY.COM

©PE

NN

BAR

RY 2

009

PENNBARRY 7

TM


Zephyr

Zephyr

Introduction

› Accessories Matrix

ModelRoof Caps

Wall Cap Brick VentSwitches

Radiation ‡ Damper

Metal Face GrilleFlat Curb Mount Slope Speed

ControllerTimeDelay

Z3H WCF06 WCC06 SL20+ WC10 B68 LT30 AM12 DDA3 MFG6

Z5H WCF06 WCC06 SL20+ WC10 B68 LT30 AM12 DDA3 MFG6

Z6S/H WCF06 WCC06 SL20+ WC10 B68 LT30** AM12 DDA3 MFG6

Z8S/H WCF08 WCC08 SL20+ WC10 B68 LT30 AM12 DDA8 MFG8

Z81S WCF08 WCC08 SL20+ WC10 B68 LT30 AM12 DDA8 MFG8

Z10S/H WCF08 WCC08 SL20+ SL20+ B100 LT50 AM12 DDA10 MFG10

Z101S WCF10 WCC10 WCF10† *** B120 LT30 AM12 DDA12 MFG12




Z102H WCF14 WCC14 WCF14† *** B120 LT40 AM12 DDA12 MFG12

Z12H WCF14 WCC14 WCF14† *** B120 LT40 AM12 DDA12 MFG12

Z14 WCF20 WCC20 CF *** B120 LT40 AM12 -- MFG14*

Z15 WCF20 WCC20 CF *** B150 LT35 -- -- MFG15*

+ Manufactured of galvanized steel. All other accessories manufactured of aluminum.* Specify MFG (perforated metal) or MCG (aluminum core).

‡ Kit is field installed, shipped separate from fan.** Z6H unit only. ***Use brick vent. †4 in 12 max. pitch.

Duct Transition Part No. Units Round Dia.

ZT, ZJ1, Z3, Z5, Z6 56337-0 3 1/4” x 10” 6”

Z8, Z81, Z10 56340-0 6” x 8” 8”

Z12, Z101, Z102, Z121* 56385-0 6” x 8” 8”

› Square to Round TransitionDesigned to make the installation of flex duct quick and easy. Available to accommodate the most common flex duct sizes.

2”2 1/4”

3”

7/8”

13/32”HOLE DIAMETER

› Ceiling Radiation DamperFor areas where local codes require fire dampers for compliance with National Fire Protection Standard 90A, PennBarry offers a UL approved damper. The dampers are rated for 3 hours and are activated at 165°F. Compact in design, the dampers add only 7” in height when mounted between the fan and the grille. Static pressure created by the damper is negligible.

› Vibration HangerHanger vibration eliminators feature rubber-in-shear type and are available for use with all units.

› Static Pressure Drop Chart for Accessories

4000300025001500

1000900800700600500400

300250200150100

1250

350

B100

SL120

Air

CFM

Thr

u th

e A

cces

sory

Pressure Drop in Inches Water Gauge

B150

WCF/WCC 14B120WCF/WCC12

WCF/WCC10WCF/WCC08B68

WCF/WCC06WC10

.01 .15 .02 .03 .04 .05 .06 .07 .08 .09 .10 .15 .20 .25 .30 .40 .50

AVAILABLE WITH MODELSZ14 & Z15

AVAILABLE WITH MODELSZ3 - Z12

Accessories

* Includes two pieces.

WWW.PENNBARRY.COM

©PEN

NBAR

RY 2009

8 PENNBARRY

TM

Ceili

ng E

xhau

st F

ans

Zephyr

Zephyr

Dimensional Information & Performance Data

Z3 - Z12› Zephyr Features & Dimensional Data

Some Selections Below One Sone• AMCA Air & Sound Certified • UL Listed for UL705 and UL507• All Motors with Thermal Overload Protection• Quick Access Wiring• Easy to Balance via Variable Speed Control (Lektrol)• Field Convertible Discharge Orientation• Field Convertible from Ceiling to Inline Installation• Popular Models with Multi-Speed Motor • (Wide Performance Range)

› Zephyr Performance DataModel MAX. WATT Amps RPM SP 0.000” 0.125” 0.250” 0.375” 0.500” 0.625” 0.750”

Z3H 39 0.5 1550CFM 109 83 - - - - -

SONES2 1.7 2.3 - - - - -

Z5H 79 1 1550CFM 192 163 128 93 - - -

SONES2 3.4 3.3 3.3 3.4 - - -

Z6S5 47 0.6 1050CFM 123 101 82 - - - -

SONES2 0.9 1.4 1.8 - - - -

Z6H5 108 1.4 1550CFM 230 196 166 122 - - -

SONES2 3.3 3 3 3.1 - - -

Z8S6 77 1 1050CFM 272 247 231 217 199 - -

SONES2 2.1 2.4 2.9 3.3 3.6 - -

Z81S 77 0.9 1050CFM 310 273 239 213 182 136 73

SONES2 2.5 2.7 2.9 3.3 3.7 4.2 4.3

Z8H6 130 1.6 1550CFM 426 401 377 357 341 328 304

SONES2 4.5 4.7 4.7 5.1 5.6 5.8 5.8

Z10S7 243 2.5 1050CFM 469 441 423 403 387 367 347

SONES2 4.5 4.8 5.1 5.4 5.6 5.8 6

Z101S 153 1.6 1050CFM 612 537 467 405 222 116 -

SONES2 3.9 3.6 3.9 4.6 5.5 6 -

Z10H7 390 3.6 1550CFM 728 694 664 638 613 591 565

SONES2 8.6 8.6 8.6 8.7 8.6 8.8 8.8

Z102S 269 4.5 1050CFM 816 747 691 602 335 - -

SONES2 5.8 5.8 5.4 5 4.9 - -

Z12S 260 2.9 1050CFM 901 855 812 755 683 552 -

SONES2 5.8 5.9 6.3 6.5 6.5 6 -

Z121S 370 3.6 1050CFM 1083 1062 1024 949 838 686 270

SONES2 7 6.9 6.6 6.1 5.7 5.3 4.6

Z102H 812(BHP 0.53) 7.5 1550

CFM 1435 1385 1338 1294 1247 1203 1163SONES2 11.8 11.7 11.9 11.9 11.7 11.3 11

Z12H 851(BHP 0.65) 7.9 1550

CFM 1566 1511 1464 1417 1364 1307 1251SONES2 13.5 13.3 12.9 12.7 12.3 12 11.7

1. Speed (RPM) shown is nominal. Performance is based on actual speed of test. 2. Performance shown is for installation type B - Free Inlet, Ducted Outlet. Performance ratings include the effects of an inlet grille and backdraft damper in the airstream. 3. The sound ratings shown are loudness values in fan sones at 5ft. (1.5m) in a hemispherical free field calculated per AMCA Standard 301. 4. Specify discharge configuration. Standard types are RA, TD, TDA and TDA-RA. 5. Z6S and Z6H is the same unit shipped with EASYTAP dual speed motor. Wired on S (low) speed. 6. Z8S and Z8H is the same unit shipped with EASYTAP dual speed motor. Wired on S (low) speed. 7. Z10S and Z10H is the same unit shipped with EASYTAP dual speed motor. Wired on S (low) speed.

› Zephyr Dimensional References

ModelHousing Outlet Duct Grille

A B C D E E1 F G H J K LZ3,5,6 12 1/2” 9 1/8” 16” 9 1/8” 1 1/4” 1 1/4” 5 3/8” 10” 3 1/4” 3/4” 11” 13 3/4”Z8,81 13 7/8” 11 3/8” 17 3/8” 11 3/8” 1 7/8” 4” 5 1/4” 8” 6” 3/4” 13 1/4” 14 7/8”Z10 18” 14 1/8” 21 1/2” 14 1/8” 3 5/8” 6 3/8” 8” 8” 6” 3/4” 15 1/2” 19 3/8”

Z12, 101, 102, 121 24” 14 1/8” 27 1/2” 14 1/8” 1” 1” 8” 22” 6” 3/4” 15 1/2” 25”

L

D

AGE

K

B

C

J

H

F

WWW.PENNBARRY.COM

©PE

NN

BAR

RY 2

009

PENNBARRY 9

TM


Zephyr

Zephyr | TDA Option


Z3 - Z12 (TDA)› Zephyr (with TDA Option) Features & Dimensional Data

Some Selections Below One Sone• AMCA Air & Sound Certified• UL Listed for UL507 & UL705• All Motors with Thermal Overload Protection• Quick Access Wiring• Easy to Balance via Variable Speed Control (Lektrol)• Field Convertible Discharge Orientation• Field Convertible from Ceiling to Inline Installation• Popular Models with Multi-Speed Motor • (Wide Performance Range)

› Zephyr (with TDA Option) Performance DataZephyr Model MAX. WATT Amps RPM SP 0.000” 0.125” 0.250” 0.375” 0.500” 0.625” 0.750” 1.000” 1.250” 1.500”

Z3H (TDA) 42 0.5 1550CFM 107 81 - - - - - - - -

SONES2 1.7 1.9 - - - - - - - -

Z5H (TDA) 83 1 1550 CFM 199 171 143 104 - - - - - -

SONES2 1.9 2 2.1 2.1 - - - - - -

Z6S (TDA)5 46 0.6 1050 CFM 127 93 66 - - - - - - -

SONES2 0.9 1.2 1.6 - - - - - - -

Z6H (TDA)5 108 1.4 1550 CFM 227 192 157 113 - - - - - -

SONES2 2.7 2.7 2.8 2.9 - - - - - -

Z8S (TDA)6 75 1 1050 CFM 255 228 208 190 165 139 110 - - -

SONES2 1.8 1.9 2.4 2.8 3.3 3.6 3.7 - - -

Z81S (TDA) 84 0.9 1050 CFM 307 274 252 228 198 152 95 - - -

SONES2 2.2 2.2 2.5 2.9 3.1 3.3 3.5 - - -

Z8H (TDA)6 132 1.6 1550 CFM 402 376 350 335 318 301 277 - - -

SONES2 4.1 3.9 3.9 4.2 4.4 4.6 4.9 - - -

Z10S (TDA)7 234 2.5 1050 CFM 456 423 391 367 350 337 320 268 128 -

SONES2 4.1 4.5 4.7 4.9 5.2 5.4 5.7 6.2 6.4 -

Z101S (TDA) 152 1.6 1050 CFM 609 521 438 373 272 130 - - - -

SONES2 3.2 3.4 4.3 4.6 5.2 5.6 - - - -

Z10H (TDA)7 372 3.6 1550 CFM 700 661 626 593 558 528 504 455 368 -

SONES2 8 8 7.9 7.9 8 8.2 8.1 8 7.8 -

Z102S (TDA) 273 4.5 1050 CFM 780 720 660 592 336 - - - - -

SONES2 4.6 5.7 5.6 4.8 4.7 - - - - -

Z12S (TDA) 263 2.9 1050 CFM 886 829 786 735 660 526 180 - - -

SONES2 5.5 5.7 5.6 5.8 5.7 5.3 4.7 - - -

Z121S (TDA) 344 3.6 1050 CFM 1089 1043 981 899 802 672 404 - - -

SONES2 6.5 6.5 6.3 6 5.7 5.3 4.4 - - -

Z102H (TDA) 810 (BHP 0.53) 7.5 1550

CFM 1397 1348 1301 1253 1206 1162 1121 1034 916 611 SONES2 10.7 10.5 10.7 10.6 10.4 10.1 9.9 9.6 9.4 9

Z12H (TDA) 810(BHP 0.53) 7.9 1550

CFM 1519 1475 1430 1386 1343 1300 1254 1146 1017 697 SONES2 12.7 12.4 12.2 11.7 11.5 11.2 10.9 10.5 10.2 9.6

1. Speed (RPM) shown is nominal. Performance is based on actual speed of test. 2. Performance shown is for installation type D - Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances in the airstream. 3. The sound ratings shown are loudness values in fan sones at 5ft. (1.5m) from the test inlet duct in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installations Type D: ducted inlet ducted outlet. Ratings do not include the effect of duct end correction. 4. Specify discharge configuration. Standard types are RA, TD, TDA and TDA-RA. 5. Z6S and Z6H is the same unit shipped with EASYTAP dual speed motor. Wired on S (low) speed. 6. Z8S and Z8H is the same unit shipped with EASYTAP dual speed motor. Wired on S (low) speed. 7. Z10S and Z10H is the same unit shipped with EASYTAP dual speed motor. Wired on S (low) speed.

› Zephyr (with TDA Option) Dimensional References

ModelHousing Outlet Duct TDA Panel

A B C D E E1 F G H J X Y ZZ3,5,6 12 1/2” 9 1/8” 16” 9 1/8” 1 1/4” 1 1/4” 5 3/8” 10” 3 1/4” 3/4” 10” 6” 1 5/8” Z8,81 13 7/8” 11 3/8” 17 3/8” 11 3/8” 1 7/8” 4” 5 1/4” 8” 6” 3/4” 10” 8” 1 9/16”Z10 18” 14 1/8” 21 1/2” 14 1/8” 3 5/8” 6 3/8” 8” 8” 6” 3/4” 14” 10” 2”

Z12, 101, 102, 121 24” 14 1/8” 27 1/2” 14 1/8” 1” 1” 8” 22” 6” 3/4” 20” 10” 2”

J

H

F

YZ

D

A

GE

B

X

Note: The TDA-RA configuration is shown. X and Y dimensions will remain the same for TDA-Inline configuration.

WWW.PENNBARRY.COM

©PEN

NBAR

RY 2009

10 PENNBARRY

TM

Ceili

ng E

xhau

st F

ans

Zephyr

Dimensional Information & Performance DataZephyr | Large Capacity Fans

Z14 & Z15

› Zephyr (Z14 & Z15 Large Capacity) Performance DataModel RPM Inlet Area Outlet Area Wheel Dia Wheel Circ. SP 0.100” 0.125” 0.250” 0.375” 0.500” 0.625” 0.750” 0.875” 1.00”

Z14115/1/601/2 HP

1150 0.5 1550 8” 2.09’CFM 2200 2195 2050 1870 1685 1425 880 285 -

SONES 7.9 7.9 7.6 7.1 6.8 6.7 6.6 6.4 -BHP 0.56 0.56 0.54 0.49 0.45 0.39 0.26 0.15 -

1060 1 1550 8” 2.09’CFM 2025 2015 1835 1645 1400 880 - - -

SONES 7.2 7.2 6.9 6.4 6.3 6 - - -BHP 0.44 0.43 0.4 0.36 0.33 0.22 - - -

980 0.6 1050 8” 2.09’CFM 1865 1845 1630 1410 1015 280 - - -

SONES 6.6 6.6 6.2 5.8 5.7 5.3 - - -BHP 0.34 0.34 0.31 0.28 0.2 0.1 - - -

880 1.4 1550 8” 2.09’CFM 1660 1605 1375 1055 255 - - - -

SONES 5.8 5.8 5.4 4.8 4.6 - - - -BHP 0.25 0.24 0.21 0.17 0.07 - - - -

Z15230/1/60

1 HP

1030 0.9 1050 9” 2.36’CFM 3290 3260 3100 2920 2720 2510 2260 1930 1140

SONES 9.5 9.5 9.4 9 8.7 8.6 8.3 8.2 8.1 BHP 1.1 1.1 1.05 1 0.96 0.91 0.85 0.75 0.52

1000 1.6 1550 9” 2.36’CFM 3185 3155 2990 2800 2590 2365 2085 1625 -

SONES 9.4 9.4 9.2 8.7 8.4 8.3 8 7.7 -BHP 1 1 0.95 0.91 0.86 0.81 0.73 0.61 -

950 2.5 1050 9” 2.36’CFM 3015 2980 2805 2600 2375 2115 1755 - -

SONES 8.8 8.8 8.6 8.2 7.8 7.6 7.4 - -BHP 0.86 0.85 0.81 0.77 0.72 0.66 0.56 - -

880 1.6 1050 9” 2.36’CFM 2775 2735 2535 2305 2045 1715 - - -

SONES 8 7.9 7.8 7.4 7.1 6.9 - - -BHP 0.68 4.6 0.63 0.59 0.54 0.46 - - -

Speed (RPM) shown is nominal. Performance is based on actual speed of test. Other speeds listed are obtainable by using Lek-Trol™ model LT40 for fan model Z14 and Lek-Trol™ LT35 for fan model Z15. Sone ratings are in accordance with AMCA Bulletin 301-90. Performances shown is for installation type B - Free inlet, Ducted outlet. The AMCA Certified Ratings Seal applies to air capacities only. Performance ratings do not include the effects of appurtenances in the airstream.

› Zephyr (Z14 & Z15 Large Capacity) Dimensional References

Model A B C D L OOutlet Inlet

G H M NZ14 38” 14 1/2” 14 1/2” 15 1/2” 26 1/2” 7 5/8” 33 3/4” 7 3/4” 12 1/2” 36”Z15 45 1/2” 16 1/2” 16 1/2” 17 1/2” 31 3/4” 10” 41 1/4” 9 3/4” 14 1/2” 43 1/2”

› Zephyr (Z14 & Z15 Large Capacity) Features & Dimensional Data

Quiet Design with Insulated Housing• Produces High Volumes of Air at Low Noise Levels• Versatile Discharge Orientations• Easy Installation in Confined Spaces• AMCA Air Certified• UL Listed for UL705; Z14 UL507 Listed•

C

M

H

O

1” 1”NA

D B

G

L

WWW.PENNBARRY.COM

©PE

NN

BAR

RY 2

009

PENNBARRY 11

TM


Zephyr

Zephyr | Low Profile FansDimensional Information & Performance Data

Zephyrette & Zephyr Jr. (ZT & ZJ1)› Zephyr (ZT & ZJ1) Features & Dimensional Data

Quiet Operation: Low Sone Level, Non-Overloading Low Power Consumption Design• Thermal Overload Protection Integral with Motor• Rust Resistant, Durable Housing of Galvanized Steel• UL Listed for UL705 and UL507• AMCA Air Certified• Lek-Trol™: Variable Speed Controller Can be Built into Fan Housing for Precise System • Balancing and Energy Conservation

ModelNumber

Max Watts

Motor60HzAC

MotorRPM

ShippingWeight(lbs.)

SP 0.0" .10" .125" .250" .375" .500" .625" .750

ZT 48 115/1 1200 19 CFM 91 88 88 85 75 49 – –

SONES 1.8 2.2 2.3 2.8 3.0 3.2 – – RPM 840 930 970 1110 1280 1460 – –

ZJ1 125 115/1 1200 19 CFM 149 156 157 158 160 153 138 117

SONES 2.0 2.3 2.4 3.0 3.4 3.4 3.6 3.5 RPM 760 1000 1020 1150 1240 1360 1450 1520

Performance shown is for installation type A - Free inlet, Free outlet. Performance ratings include the effects of inlet grille and backdraft damper in the airstream. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5’ (1.5m) in a hemispherical free field calculated per AMCA std. 301. Values shown are for installation Type A: free inlet fan sone levels. The AMCA Certified Ratings Seal applies to air performance ratings only.

› Zephyr (ZT & ZJ1) Dimensional References and Performance Data

10.02”

1.56”13.74”1.56”

3.29”

1.36”

11.92”

6.55”

WWW.PENNBARRY.COM

©PEN

NBAR

RY 2009

12 PENNBARRY

TM

Ceili

ng E

xhau

st F

ans

Zephyr

Zephyr | Room-to-Room Fan


Transfan› Zephyr (Transfan) Features & Dimensional Data

Fits Easily between Wall Studs or Ceiling Joists• Variable Speed Controller is Built-in for Individual Comfort Adjustment• Attractive Face Grilles Diffuse Air Evenly• Moves Up to 255 Cubic Feet of Air Every Minute• Installs in Walls 3 3/4” to 5” Thick with an Adjustable Sleeve• Runs Quietly, Even at Top Speed• 490 RPM Fan Speed; 115 Volts Single Phase; 60/50 Hz• 255 CFM Air Capacity at 0” S.P.; 2.3 Sones Quiet Operation• UL Listed for UL705 and UL507• 9.5 lbs. Shipping Weight•

› Effect of Speed Control on CFM CapacityModel Number Max Watts Motor 50/60 Hz AC Motor RPM Shipping Weight (lbs.) Fan Capacity - CFM

TF8 60 115/1 1250 9.5SP 0.000 0.050 0.100 0.200

CFM 255 231 178 132SONES 2.3 2.2 1.9 1.8

8 1/2” DIA.

13 3/4”

11” 10 1/4”

3 7/8”

Adjustable

3 7/8”

8 1/2” DIA.

13 3/4”

11” 10 1/4”

3 7/8”

Adjustable

3 7/8”

WWW.PENNBARRY.COM

©PE

NN

BAR

RY 2

009

PENNBARRY 13

TM


Zephyr

Zephyr | Compact Economical Fan


Z1, ZL1 & ZL2

Model No. SONES at0.0” Ps

CFM at Static Pressure (Ps - Inches of H2O)Volts Watts Nominal

RPM DuctDia.0.000 .100 .125 .250 .375 .500

Z1 3.4 56 51 50 46 41 32 120 55 1700 3" ZL1 1.9 62 51 49 32 9 - 120 30 1070 4" ZL2 4 97 87 84 69 50 19 120 50 1380 4"

› Zephyr (Z1, ZL1 & ZL2) Performance Data

Performance shown is for installation type B - Free inlet, ducted outlet. Performance ratings include the effects of inlet grille and backdraft damper in the airstream. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5’ (1.5m) in a hemispherical free field calculated per AMCA std. 301. Values shown are for installation Type B: free inlet fan sone levels.

7 1/2” 7 1/2”

3 5/8”

9 1/4” 9”

3/8”

7 1/2” 7 1/2”

3 5/8”

9 1/4” 9”

3/8”

› Zephyr (Z1) Features & Dimensional Data

56 CFM, 3.4 Sones @ 0.0” Ps.• Quiet-Designed Durable Blower Wheels• Torsion Spring Grille Mounting; No Tools Needed• Compact Housings Fit Easily between Wall Studs• Double Strength Steel Mounting Flanges with Keyhole • Lots for Fast, Sturdy InstallationUL507 Listed for Use Over Bathtubs and Showers When • Connected to a GFCI Protected Branch CircuitAMCA Air and Sound Certified•

8”8 1/4”

5 3/4”

10 5/8” 11 1/8”

2”

8”8 1/4”

5 3/4”

10 5/8” 11 1/8”

2”

› Zephyr (ZL1 & ZL2) Features & Dimensional Data

62 CFM, 1.9 Sones @ 0.0” Ps – Model ZL1• 97 CFM, 4.0 Sones @ 0.0” Ps – Model ZL2• 100 watt Lighting (Bulb Not Included)• Totally Enclosed Low RPM Motor with Sealed Bearings• Centrifugal Blower Wheel• White Molded Polymeric Grille with Unbreakable Light Lens• Plug-In Receptacles for Fan and Light• Rugged Steel Housing with Built-In Mounting Brackets• 4” Polymeric Duct Connector• Durable Damper Eliminates Backdrafts; No Metallic Clatter• UL507 Listed for Use Over Bathtubs and Showers when • Connected to a GFCI Protected Branch CircuitAMCA Air and Sound Certified•

WWW.PENNBARRY.COM

©PEN

NBAR

RY 2009

14 PENNBARRY

TM

Ceili

ng E

xhau

st F

ans

Zephyr

Zephyr

Fan Curves

Zephyr Fan Curves› Zephyr Fan CurvesAll Zephyr fan curves are based on laboratory tests conducted in accordance with AMCA standards. The curves shown below summarize the sizes and speeds of units available.› RA Models › TDA Models

0 40 80 120 160 200 240STAT

IC P

RES

SUR

E IN

INC

HES

W.G

.

CFM

0.0000.0500.1000.1500.2000.2500.3000.3500.4000.4500.5000.5500.600

Z6S

Z5H

Z6H

Z3H

MODEL Z3H – 39 MODEL Z6S – 47 MODEL Z5H – 79 MODEL Z6H – 108

MAXIMUM WATTS FOR:

0 40 80 120 160 200 240STAT

IC P

RES

SUR

E IN

INC

HES

W.G

.

CFM

0.0000.0500.1000.1500.2000.2500.3000.3500.4000.4500.5000.5500.600

Z3H

Z6S Z5H

Z6H

MODEL Z3H – 42 MODEL Z6S – 46 MODEL Z5H – 83 MODEL Z6H – 108

MAXIMUM WATTS FOR:

0 200100 300 400 500 600 700 800STAT

IC P

RES

SUR

E IN

INC

HES

W.G

.

CFM

Z10HZ10SZ8H

Z81S

1.6251.5001.3751.2501.1251.0000.8750.7500.6250.5000.3750.2500.1250.000

Z8S

MODEL Z8S – 75 MODEL Z8H – 132 MODEL Z81S – 84 MODEL Z10S – 234

MODEL Z10H – 372

MAXIMUM WATTS FOR:

0 200100 300 400 500 600 700 800STAT

IC P

RES

SUR

E IN

INC

HES

W.G

.

CFM

Z10HZ10S

Z8HZ8SZ81S

1.6251.5001.3751.2501.1251.0000.8750.7500.6250.5000.3750.2500.1250.000

MODEL Z8S – 77 MODEL Z8H – 130 MODEL Z81S – 77 MODEL Z10S – 108

MODEL Z10H – 390

MAXIMUM WATTS FOR:

0 1600140012001000800600400200STAT

IC P

RES

SUR

E IN

INC

HES

W.G

.

CFM

Z12HZ12S

Z102H

Z102SZ101S

Z121S

2.000

1.750

1.500

1.250

1.000

0.750

0.500

0.250

0.000

MODEL Z101S – 153 MODEL Z121S – 370 MODEL Z102S – 269 MODEL Z102H – 812 MODEL Z12S – 260 MODEL Z12H – 851

MAXIMUM WATTS FOR:

0 1600140012001000800600400200

2.000

1.750

1.500

1.250

1.000

0.750

0.500

0.250

0.000STAT

IC P

RES

SUR

E IN

INC

HES

W.G

.

CFM

Z12H

Z12S

Z102H

Z102S

Z101S

Z121S

MODEL Z101S – 152 MODEL Z121S – 344 MODEL Z102S – 273 MODEL Z102H – 810 MODEL Z12S – 263 MODEL Z12H – 855

MAXIMUM WATTS FOR:

WWW.PENNBARRY.COM

©PE

NN

BAR

RY 2

009

PENNBARRY 15

TM


Zephyr

Zephyr

Engineering Specifications

› ModelZ › Unit Size3 8 101 121 5 81 102 14 6 10 12 15

› Motor TapS = Slow Speed H = High Speed

› EnclosureO = Open Drip Proof E = Explosion Proof

› VoltageA = 110V G = 230V N = 440VB = 115V H = 240V P = 460VC = 120V J = 277V Q = 480VD = 200V K = 380V R = 575VE = 208V L = 400V S = 600VF = 220V M = 415V

› Cycle5 = 50 Hz 6 = 60 Hz

› Discharge OrientationR = Right AngleT = Top Discharge / Inline

› Damper0 = NoneD = Ceiling Radiation Damper

› Curb CapC = Curb MountedF = Flat RoofS = Sloped RoofW = Wall Mount0 = None

› Brick Vent0 = NoneB = Brick Vent

› Steel Grille0 = NoneG = Steel Grille

› Square to Round Transition0 = NoneT = Square to Round Transition

› Top Discharge0 = NoneT = TDA Kit Factory InstalledF = TDA Field Mount

› Vibration Isolation0 = NoneRH = Rubber Hanger

› Transformer*0 = NoneT = Transformer

› Speed Controller0 = NoneL = LooseM = Mounted

› Thermostat0 = None

› Air Minder Switch0 = NoneD = Air Minder Time Delay Switch

› Motion Sensor0 = NoneM = Motion Sensor

› Pilot Light0 = NoneP = Pilot Light

› 2 Speed Switch0 = None

Engineering Specifications & Configurations

* Does not apply to models Z1, ZL1, ZL2

› Zephyr (Z3 - Z15)Direct drive ceiling and cabinet fan shall be Zephyr Z, manufactured by PennBarry, Richardson, Texas 75081.

Fan housings shall be acoustically insulated, galvanized steel, and include integral backdraft damper (except Z1, ZL1, ZL2) which shall be chatter proof. Grille face shall be of aerodynamic white egg crate design and provide 85% free area. Fans shall be provided with cord, plug, and receptacle inside the housing. Entire fan, motor and wheel assembly shall be removable. Fans shall be available with TDA panel (except Z1, ZL1, ZL2) for inline orientation. Units shall be field convertible from right angle to top discharge. Fans shall have forward curved centrifugal wheel(s). Fan motors shall be multi-speed (for applicable models), positively cooled, have thermal overload protection, be suitably grounded, and mounted on vibration isolators.

Each fan shall bear the AMCA Licensed Rating Seal for Air and Sound Performance (Z) or Air Performance (Z14/15), and shall be UL Listed for UL705 and UL507, and shall be CSA Listed. The Z15 is not UL507 certified.

WWW.PENNBARRY.COM

©PEN

NBAR

RY 2009

16 PENNBARRY

TM

Ceili

ng E

xhau

st F

ans

Zephyr

Engineering Specifications

› ModelZ1 ZL1 ZL2 ZJ1 ZT

› Unit Size0 = None

› Drive TypeD = Direct Drive B = Belt Drive

› Motor Tap0 = None

› EnclosureO = Open Drip Proof

› VoltageA = 115V

› Cycle6 = 60 Hz

› Discharge OrientationR = Right Angle

› Damper*0 = NoneBDD = Backdraft Damper

› Curb CapC = Curb Mounted F = Flat RoofS = Sloped Roof W = Wall Mount

› Brick Vent0 = None B = Brick Vent

› Steel Grille*0 = None G = Steel Grille

› Square to Round Transition*0 = NoneT = Square to Round Transition

› Top Discharge*0 = NoneT = TDA Kit Factory InstalledF = TDA Field Mount

› Vibration Isolation0 = None RH = Rubber Hanger

› Transformer*0 = None T = Transformer

› Speed Controller0 = None L = Loose M = Mounted

› Thermostat0 = None

› Air Minder Switch0 = NoneD = Air Minder Time Delay Switch

› Motion Sensor0 = None M = Motion Sensor

› Pilot Light0 = None P = Pilot Light

Engineering Specifications & Configurations

Zephyr

* Does not apply to models Z1, ZL1, ZL2

› Zephyrette & Zephyr Jr. All ceiling and/or wall mounted fans indicated on the plans and schedule shall be Zephyr Jr., or Zephyrette models by PennBarry, 1401 North Plano Road, Richardson, TX 75081.

Air deliveries and maximum sone levels shall be as indicated on the plans. Fans shall be listed with Underwriters Laboratories. Fans shall feature true steel centrifugal wheels and the galvanized steel fan casing shall incorporate an integral backdraft damper. Motor speed shall not exceed listed RPM. Grille shall be of white egg-crate shape design, comply with OSHA requirements and provide 85% free open area. Terminal box shall be provided with cord, plug and receptacle. Entire fan, motor and wheel assembly shall be removable without disturbing the housing.

Each fan shall be UL705 and UL507 Listed and CSA Listed.

› Zephyr Transfan Direct drive axial room-to-room fan shall be Transfan TF, manufactured by PennBarry, Richardson, Texas 75081.

Fan housing shall be galvanized steel and shall include an adjustable sleeve to accommodate various wall thicknesses. Two-faced grilles shall be of aerodynamic white egg crate design and provide 85% free area. Entire fan, motor and propeller assembly shall be removable. Propellers shall be die formed aluminum. Fan motor shall be permanently lubricated, positively cooled, & have thermal overload protection. Fans shall be provided with cord, plug, speed controller and receptacle factory installed inside the housing.

Each fan shall bear the AMCA Licensed Ratings Seal for Air Performance, & shall be UL705 and UL507 and CSA Listed.

› Zephyr Z1, ZL1, & ZL2Direct drive ceiling and cabinet fan shall be Zephyr, Z1 or Zephyr Light, ZL and supplied by PennBarry, Richardson, Texas 75081.

Fan housings shall be painted steel and include integral backdraft damper which shall be chatter proof. Face grille shall be of aerodynamic design and include an unbreakable lens for use with a 100 watt (max) bulb (except Z1). Fans shall be provided with cord, plug and receptacle inside the housing. Entire fan, motor and wheel assembly shall be removable. Fans shall have a forward curved centrifugal wheel. Fan motors shall be positively cooled, have thermal overload protection, be suitably grounded and mounted on vibration isolators.

Each fan shall bear the AMCA Licensed Rating Seal for Air and Sound Performance and shall be UL507 and CSA Listed.

WWW.PENNBARRY.COM

©PE

NN

BAR

RY 2

009

PENNBARRY

TM

Sales Agreement

› Products CoveredPennBarry Fans and Ventilators (each, a “PennBarry Product”)

› One Year Limited Warranty For PennBarry ProductsPennBarry warrants to the original commercial purchaser that the PennBarry Products will be free from defects in material and workmanship for a period of one (1) year from the date of shipment.

› Exclusive RemedyPennBarry will, at its option, repair or replace (without removal or installation) the affected components of any defective PennBarry Product; repair or replace (without removal or installation) the entire defective PennBarry Product; or refund the invoice price of the PennBarry Product. In all cases, a reasonable time period must be allowed for warranty repairs to be completed.

› What You Must DoIn order to make a claim under these warranties:

You must be the original commercial purchaser of the PennBarry Product.• You must promptly notify us, within the warranty period, of any defect and provide us with any substantiation that we may • reasonably request.The PennBarry Product must have been installed and maintained in accordance with good industry practice and any specific • PennBarry recommendations.

› ExclusionsThese warranties do not cover defects caused by:

Improper design or operation of the system into which the PennBarry Product is incorporated.• Improper installation.• Accident, abuse or misuse.• Unreasonable use (including any use for non-commercial purposes, failure to provide reasonable and necessary maintenance • as specified by PennBarry, misapplication and operation in excess of stated performance characteristics).Components not manufactured by PennBarry.•

› LimitationsIn all cases, PennBarry reserves the right to fully satisfy its obligations under the Limited Warranties by refunding the invoice • price of the defective PennBarry Product (or, if the PennBarry Product has been discontinued, of the most nearly comparable current product).PennBarry reserves the right to furnish a substitute or replacement component or product in the event a PennBarry Product or • any component of the product is discontinued or otherwise unavailable.PennBarry’s only obligation with respect to components not manufactured by PennBarry shall be to pass through the warranty • made by the manufacturer of the defective component.

› GeneralThe foregoing warranties are exclusive and in lieu of all other warranties except that of title, whether written, oral or implied, in fact or in law (including any warranty of merchantability or fitness for a particular purpose).

PennBarry hereby disclaims any liability for special, punitive, indirect, incidental or consequential damages, including without limitation lost profits or revenues, loss of use of equipment, cost of capital, cost of substitute products, facilities or services, downtime, shutdown or slowdown costs.

The remedies of the original commercial purchaser set forth herein are exclusive and the liability of PennBarry with respect to the PennBarry Products, whether in contract, tort, warranty, strict liability or other legal theory shall not exceed the invoice price charged by PennBarry to its customer for the affected PennBarry Product at the time the claim is made.

Inquiries regarding these warranties should be sent to: PennBarry, 1401 North Plano Road, Richardson, TX 75081

1-Year Limited Manufacturer Warranty

Zephyr

TM

For more information, contact your local PennBarry Sales Manufacturer Representative or visit us at www.PennBarry.com.

Other PennBarry Products

©2009 PennBarry™ All Rights Reserved. May 2009

Centrifugal Products

› Domex › Fumex Fatrap › Zephyr › Dynamo Centrifugal Kitchen Hood Centrifugal Ceiling and Inline Fans Centrifugal Blowers Roof Exhausters Roof Exhausters

AXIAL / GRAVITY PRODUCTS

CENTRIFUGAL PRODUCTS

For more information contact your local PennBarry SalesManufacturer Representative or visit us at

©2005 PennBarry™ All Rights Reserved. February 2005

DomexCentrifugalRoof Exhausters

Fumex FatrapKitchen Hood CentrifugalRoof Exhausters

ZephyrCeiling and Inline Fans

DynamoCentrifugal Blowers

BreezewayPropeller Wall Fans

HI-EXPower Roof Ventilator

AiretteGravity Intake/Relief Hood

VaneaxialInline Fans

Powered AiretteAxial Roof Ventilators

AxcentrixBifurcator Fan

Domex AxialAxial Roof Ventilators

TubeaxialInline Fans

Centrex InlinerCentrifugal Inline Fans

LC DynafanLow Contour CentrifugalRoof Exhausters

ESIEfficient SilentInline Fan

Fume ExhaustCurb MountedCentrifugal Fans

AEG05_Cover.qxp 12/13/2004 8:50 AM Page 2






















› Centrex Inliner › LC Dynafan › ESI › Fume Exhaust CentrifugalInlineFan LowContourCentrifugal EfficientSilent CurbMounted Roof Exhausters Inline Fan Centrifugal Fans

Axial / Gravity ProductsAXIAL / GRAVITY PRODUCTS





















› Breezeway › Hi-Ex › Tubeaxial › Vaneaxial Propeller Wall Fan Power Roof Ventilator Inline Fans Inline Fans






















› Powered Airette › Airette › Domex Axial › Axcentrix Axial Roof Ventilators Gravity Intake/Relief Hood Axial Roof Ventilators Bifurcator Fan

Documents

ZEPHYR Model: Z Ceiling Fan - usair-eng. · PDF file ©PENNBARRY 2009 PENNBARRY 3 TM Ceiling Exhaust Fans Z e p h y r Introduction Zephyr › Low Sound For sound critical applications,