Page 1Find us at www.keysight.com

S O L U T I O N P A R T N E R

Keysight and Solutions Partner

To learn how this solution can address your specific needs, please contact Keysight’s solution partner, Solution Sources Programming (SSP).

SSP is a global test and mea-surement services provider specializing in designing and implementing turnkey test solutions throughout the PCB product life cycle, and sub-assembly and assembled products.

ssprog.com

Strategic Solutions Partner

ZA0047A Wireless IoT Device Regulatory Test SolutionKeysight Technologies and Solution Sources Programming

Regulatory Testing for 2.4/5 GHz Unlicensed Band As the world becomes increasingly connected, wireless technologies have

evolved to keep pace. Major regulatory bodies such as FCC and ETSI have begun

imposing stringent compliance test requirements for the unlicensed 2.4 and 5

GHz bands, and wireless IoT devices must go through comprehensive regulatory

testing to ensure they can operate harmoniously in busy wireless environments.

With the Keysight ZA0047A wireless IoT device regulatory test solution, you can:

• Cover the latest test cases for ETSI EN300-328/301-893, FCC Part

15.247/407 and DFS with dedicated test software

• Support various IoT device types, such as Frequency Hopping, Adaptivity,

MIMO up to 8 channels and common radio formats (WLAN, Bluetooth® and

Zigbee, etc)

• Simplify test automation and improve speed using the signaling test method

(with X8711A IoT device functional test solution or companion device)

• Reduce test complexity with readily available software, and prove adherence

to regulatory standards with the report generation function

Page 2Find us at www.keysight.com

Figure 1: Solution Sources Programming’s lifecycle management of ZA0047A

Complete turnkey ZA0047A solution with Solution Sources Programming (SSP)

For more than 29 years, SSP has helped innovative design teams across multiple

industries assure product performance and quality. SSP will integrate the Keysight

ZA0047A so you can get additional benefits such as:

• Test station hardware assembly in a mobile test rack, with PC and software

installation, work shelves and ergonomic swing arm for monitor, keyboard and mouse

• Pre-ship verification tests to ensure tester performs to expectations

• One-stop shop – obtain RF shield box, antennas and cables for over-the-air testing

• Customizable test data reports, per customer requirements

Gather instrumentconfigurationrequirements

Create proposal Quote Order material

Ongoingtechnicalsupport

Validationtest

Installation Buy off

ManufacturingCompliance

testequipment

Page 3This information is subject to change without notice. © Keysight Technologies, 2019-2020, Published in USA, January 31, 2020, 5992-4295EN

Find us at www.keysight.com

Learn more at: www.keysight.com

For more information on Keysight Technologies’ products, applications or services,

please contact your local Keysight office. The complete list is available at:

www.keysight.com/find/contactus

System Components

Hardware model Description

N9020B with options 544, B1X, CR3, AMG

MXA Signal Analyzer, 10Hz to 44GHz, 160MHz analysis bandwidth, wideband IF output connector, calibration + uncertainties + Guard-banding (accredited)

N5172B with options 506, 653, 655, 657, AMG, N7607EMBC

EXG RF Vector Signal Generator, 9kHz to 6GHz, with 160MHz RF bandwidth, calibration + uncertainties + Guard-banding (accredited), Signal Studio for DFS Radar Profiles

N5173B with options 540, AMG

EXG RF Analog Signal Generator, 9kHz to 40GHz, calibration + uncertainties + Guard-banding (accredited)

ZA0047A-105 X8749A Signal Conditioning Test Set

ZA0047A-106 X8750A 4-Channel MIMO Power Test Set

Software model Description

XA5001A ETSI 300-328/301-893 test software

XA5002A FC Part 15.247/407 test software

XA5003A DFS test software

Bluetooth® is a registered trademark owned by Bluetooth SIG, Inc., and any use of such marks by Keysight Technologies is under license.