12

Z-Power EXP

  • Upload
    douslas

  • View
    31

  • Download
    0

Embed Size (px)

DESCRIPTION

Rhoss

Citation preview

  • OVER 10 YEARS EXPERIENCEHundreds of systems built in the last 10 years with polyvalent units in residential and commercial buildings, o ce buildings, industrial complexes, hospitals, clinics and accommodation in general.

    EFFICIENT TECHNOLOGY

    EXP Systems allows a complete air conditioning system to be set up with domestic hot water production, thereby obtaining a double result with a single unit and one expense, and guaranteed high performance from the energy supplied by the compressor in terms of energy e ciency.

    VERSATILE SYSTEMEXP Systems is a fourth-generation heat pump that produces hot and chilled water, combined or independently, for 4-pipe and 2-pipe systems with domestic hot water production.

    RELIABLE UNITThanks to its innovative control logic, EXP Systems meets the cooling and heating requirements by minimizing the stops and restarts of the compressor resulting in the bene cial e ect on the duration of all the components of the cooling circuit.

    FLEXIBLE INSTALLATIONEXP Systems is adaptable for various system installation requirements thanks to its several con gurations and accessories that make it plug and play.

    ECOLOGICAL SOLUTIONEXP Systems can be de ned as a polyvalent environmentally friendly unit because it represents the e cient evolution of the electric heat pump, in line with the most stringent European directives. The high performance in the heat recovery mode further increases the di erence compared to conventional installations, thereby reducing the direct and indirect emissions that contribute to the greenhouse e ect.

    Independent and simultaneous production of chilled water for air condi-tioning and hot water for heating to allow comfort in buildings with di er-ent internal heat loads also due to the di erent orientation of the building (e.g. o ce building).

    OFFICE OFFICE

    NORTH SOUTH

    Analysis carried out on a o ce building located in Milan, comparing the annual consumption of a polyvalent EXP Systems TXAVBZ 2550 unit at 550 kW with those of a conventional system consisting of a water chiller for summer/winter air conditioning and a boiler for heating.

    0

    20.000

    30.000

    40.000

    50.000

    60.000

    70.000

    EXP CHILLER+BOILER

    Cost of electricity:0.15 /kWhCost of methane: 0.6 /m3

    /year

    O ce building in Milan, ITALY

    -25%

  • ... THE INTELLIGENT SOLUTION

    EXP Systems is the intelligent solution to air conditioning requests in systems where the heating demand is simultaneously or independently combined with a cooling request. The units adapt well to various types of systems, thereby guaranteeing unique e ciency and versatility.

    kW5 100 500 750

  • EFFICIENT TECHNOLOGY

    EXP Systems is todays technology that guarantees the most e cient solution in combined operation of hot and chilled water production reaching a TER of 8 or more. With EXP Systems, seasonal cooling and heating becomes e cient air conditioning throughout the year for guaranteed comfort.

    TER (*) up to 8.33

    (*) TER = total e ciency ratio in total condensation heat recovery mode

    The wide range of polyvalent air-cooled heat pumps has been designed to meet the diverse requirements of hot and chilled water production with energy e ciency values that are also A class. The cooling components have been optimized for the latest hermetic scroll and semi-hermetic screw compressors to be used with the respective use of R410A and R134a gas.

  • 0T128C

    T235C

    25 50 75 100

    AdaptiveFunctionPlus: variation of the outlet water temperature depending on the system load

    Outlet water temperature (C)

    Curve type for radiating panelsSystem load (%)

    TER (*) up to 8.3729 4th generation polyvalent water-cooled heat pumps with power up to 700 kW allow the precise and accurate choice of the model without wasting power.The e ciency in the operation mode combined with condensation heat recovery can reach TER values of up to 8.37 with guaranteed high energy savings throughout the year.

    The units of the Y-PACK EXP and Y-FLOW EXP ranges, equipped with the revolutionary AF+ (Adaptive Function Plus), which is a Rhoss patent, allow the set point to be adapted according to the load of the system for additional energy savings.

  • UNITS FOR 2 AND 4-PIPE SYSTEMS

    The EXP Systems units have been designed to operate in 2-pipe systems with domestic hot water production and in 4-pipe systems. This exibility allows it to be used in several types of construction, thereby allowing any subsequent change in the intended use.

    HOT AND CHILLED WATER FROM ONE UNIT

    The EXP Systems units are designed for a single machine to meet simultaneous and independent demands for hot and chilled water, thereby optimising energy consumption and simplifying system management.They are easy to install thanks to the possibility of hydraulic components assembled in the units require very little maintenance and guarantee high reliability of operation.

    OPERATION

    EXP Systems units can operate in 2-pipe systems with domestic hot water production, and in 4-pipe systems. This exibility allows it to be used in many types of construction.The heart of the system is represented in the new electronic control and control logic designed by Rhoss to meet all the system requirements in 2 operating modes: AUTOMATIC and SELECT.

    Often in residential cases, in homes with individual systems or apartment blocks with centralized systems, in hotels, nursing homes, gyms and accommodation structures in general, the air conditioning and air treatment requirements are accompanied by the need for domestic hot water production.When the EXP Systems is con gured for 2-pipe systems, it performs this task with maximum exibility throughout the year.

    In o ce buildings and the service sectors, the modern air conditioning systems increasingly require simultaneous production of hot and chilled water.Improved thermal insulation in structures, the increase in the heat loads due to the lighting and the presence of large windows, lead to the system having to cool certain areas while having to heat others during spring and autumn. In this case, when the EXP Systems is con gured for 4-pipe systems, it represents a very convenient complete solution.

  • SOUTHSOUTH NORTHNORTH

    HOTWATER

    COLDWATER

    HOTWATER

    COLDWATER

    COLDWATER

    HOTWATER

    DOMESTICHOT WATER

    COLDWATER

    DOMESTICHOT WATER

    HOTWATER

    Summer AUTOMATICcooling and domestic hot water

    Summercooling

    Winterheating

    Mid-seasoncooling and heating

    Winter SELECTheating and domestic hot water

    2-pipe systemsAUTOMATIC or SELECT mode

    4-pipe systemsAUTOMATIC mode throughout the year

  • CUSTOMISED SOLUTIONS

    In continuously evolving systems with customised installation requests, Rhoss provides support and advice for the best suited units for the project. Competent technicians in the relative matter and technical and sales personnel follow the market and its trends, proposing solutions.Rhoss o ers the possibility to perform the test of the EXP Systems unit by setting up the R&D Lab. This allows the buyer to perform the simulation and veri cation of the EXP Systems unit in the actual operating conditions for which it was chosen and purchased.

    RHOSS R&D Lab - TEST

    Independent and simultaneous hot and chilled water production for the systemTest in the R&D Lab for the quali cation of a TXAVQZ 2380 installed in Varese (Italy)

  • EXP Systems - From the idea to the installation:

    1. ADVICE AND TECHNICAL SUPPORT FOR THE DESIGNER WHEN CHOOSING THE MOST SUITABLE UNITS FOR THE PROJECT

    2. SELECTION OF THE EXP SYSTEMS UNITS IN ACTUAL OPERATING CONDITIONS

    3. EVALUATION OF THE CONSTRUCTION OPTIONS AND ACCESSORIES THAT BEST MEET THE SYSTEM INSTALLATION REQUIREMENTS

    4. WITNESS TEST PERFORMED IN THE RHOSS R&D Lab OR IN THE CLIMATIC CHAMBER FOR ACTUAL PERFORMANCE SIMULATION OF THE UNIT IN THE FINAL DESTINATION OF USE

    5. STARTING UP EXP SYSTEMS UNITS BY QUALIFIED PERSONNEL AROUND THE WORLD

    Independent and simultaneous hot and chilled water production for the systemTest in the R&D Lab for the quali cation of a TXHVIZ 2590 installed at the GREEN CAMPUS - University Residences - University of Pavia - ITALY

    Electricit De France, Marseille - FRANCE / Frere Hospital, East London - SOUTH AFRICA / Science Park, Stevenage - UK

    Torre EVA Management Centre, Mestre - ITALY / Polytechnic University of Madrid. Faculty of Computer Sciences Vyncolit /SPAIN O ces and Process application, Ghent - BELGIUM

  • THE RANGES AND THE APPLICATIONS

    Rhoss views EXP Systems as a design philosophy established for over 10 years.The ranges are organised in solutions with scroll and screw compressor with R134a and R410A gas, air-cooled and water-cooled in order to satisfy the several types of applications.The EXP Systems units are designed to reach energy e ciency at high levels and guarantee elds of work that allow operation throughout the year.

    1171241301332452502602652802100

    21304160

    42004260

    43202420

    2480

    0 200 400 600 800

    25502610

    2700

    0 200 400 600 800

    105107109112

    245250260270

    290211521302145

    2165218541804205

    42354260

    42904330

    43604410

    44502410

    24502500

    25902660

    2740

    AIR COOLED PRODUCT RANGE WATER COOLED PRODUCT RANGE

    Nominal cooling power - kW (water 7/12C, external temperature 35C)

    Compact-Y EXPTXAEY 117133

    CombY-Flow EXPTXHEY 105112

    Y-Pack EXPTXAEY 2804320

    Z-Flow EXPTXHVZ 24102740

    Compact-Y EXPTXAEY 245265

    Y-Flow EXPTXHEY 2454450

    Z-Power EXPTXAVZ 24202700

    Nominal cooling power - kW (water 7C/12C, condenser water 30/35C)

    TX

  • - 10C

    HOTELSRESTAURANTSGUESTHOUSES

    RESIDENTIAL BUILDINGSRESIDENTIAL CONDOMINIUMS

    SPASGYMS

    HOSPITALSCLINICSNURSING HOMES

    SERVICE SECTORS

    SHOPPING CENTRES

    WHERE TO USE THE EXP SYSTEMS

    Solution for heating, cooling and domesitc hot water production in new buildings in existing buildings with partial or com-

    plete replacement of the heating system

    Suitable for terminals at medium or low temperature

    Ideal for:

    Rhoss Service o ers advice, support and assistance programs to better serve the customer.The assistance service o ers its experience in the start-up of the Polyvalent units around the world and establishes a direct link with the customer, which is also possible thanks to the customized assistance programs.Rhoss Service adds VALUE to modern HVAC systems.

    55C55CHot water production up to 55CThe polyvalent EXP Systems units can produce hot water up to 55C with various operating limits to meet the most modern system requirements.

    In winter, air-cooled units with semi-hermetic screw compressors and R134a refrigerant gas reach outdoor air temperature limits of -10C with hot water production up to 50C.

    The latest generation air-cooled units with scroll compressors and R410A refrigerant gas have been designed to produce hot water at 45C during normal operation in winter with an outdoor air temperature of -10C.

  • RHOSS S.P.A.Via Oltre Ferrovia, 32 - 33033 Codroipo (UD) - Italytel. +39 0432 911611 - fax +39 0432 [email protected] - www.rhoss.it - www.rhoss.com

    IR GROUP S.A.S.U.19, chemin de la Plaine - 69390 Vourles - Francetl. +33 (0)4 72 31 86 31 - fax +33 (0)4 72 31 86 [email protected]

    RHOSS Deutschland GmbHHlzlestrae 23, D-72336 Balingen, OT Engstlatt - Germanytel. +49 (0)7433 260270 - fax +49 (0)7433 [email protected] - www.rhoss.de

    RHOSS GULF JLT Jumeirah Lakes Towers, Dubai UAE e-mail: [email protected]

    RHO

    SS S

    .P.A

    . dec

    lines

    all

    resp

    onsi

    bili

    ty fo

    r p

    ossi

    ble

    mis

    take

    s in

    th

    is p

    amp

    hle

    t an

    d r

    eser

    ves

    the

    rig

    ht

    to a

    lter

    th

    e fe

    atur

    es o

    f th

    eir

    pro

    duc

    ts w

    ith

    out

    not

    ice.

    K10

    530E

    N e

    d.1

    02.

    13 -

    0000

    - Pr

    inte

    d: G

    rafi

    che

    Via

    nel

    lo

    RHOSS EXP Systems,the intelligent solution!

    Over 10 years experience in manufacturing polyvalent heat pumps

    Reliable and e cient EXP ranges with TER up to 8.37

    Units for 2 and 4-pipe systems

    4th generation heat pumps up to 30% energy saving more than that of a traditional system

    Customized solutions for demanding installations

    ... and all this in one unit!

    facebook.com/RhossOffi cial

    twitter.com/RhossOffi cial

    youtube.com/RhossOffi cialChannel

    /ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages false /GrayImageMinResolution 150 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 100 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages false /MonoImageMinResolution 300 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 100 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects true /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

    /CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MarksOffset 6 /MarksWeight 0.250000 /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PageMarksFile /RomanDefault /PreserveEditing false /UntaggedCMYKHandling /UseDocumentProfile /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed true >> > ]>> setdistillerparams> setpagedevice