Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
COMPACT WHEEL LOADER
Z-Kinematic for V65/V80/V100
Absolute Reliability
STRAIGHT AND RIGID ARTICULATIONFor better reliability, for better stability. The wheels forward and backward follow the same way. No damage to the lawns, or pavements. Short turning radius and optimal positioning of pallet forks. Less wear on tires.
REAR OSCILLATING AXLEImproved operator comfort, increased machine stability, longer life. The stability of the machine is optimized when using the bucket and forks.
Z-KINEMATICThanks to its Z-kinematic system, the low position of lifting frame and tilt level gives the best possible view to the attachments and working area.
EASY TO USEThe V65, V80 and V100 are fitted with various equipment which enable precise, comfortable and productive control of the machine: Smart control, Fingertip control and multi-function joysticks offer optimal handling to the operator for a productive day work.
2
COMFORTABLE CABINDesigned to ensure maximum comfort and productivity for the operator. The performance enhancing environment provides a very pleasant working atmosphere. The control system for the machine uses innovative technology. The machine remains easy to handle, even when used in challenging conditions. This help driver and machine deliver high productivity.
HYDRAULIC QUICK-HITCH SYSTEMThe quick-hitch system allows the accessories to be easily changed from the cabin with two hand controls.
MOTOREngine with low displacement and fuel consumption, bigger torque and more power.
3
DIMENSIONSVery compact dimension in all aspects: height (between 2,6 and 2,8m), width, length and turning radius. These compact dimensions contribute to the high maneuverability of Yanmar wheel loaders.
LOADER CONCEPT
ARTICULATED STEERING WITH OSCILLATING REAR AXLEWhen used at a densely built-up location or construction sites with limited space, the articulated steering delivers great maneuverability with its 40° steering angle.
The articulated steering also allows the bucket to approach the load in a straight line, even at the maximum steering angle. This affords the operator greater flexibility in terms of picking up pallets or setting downloads.
The oscillating rear axle has a wide slewing angle of 10°, keeping all 4 wheels in contact with the ground at all times, even when working on uneven ground. Only the rear axle oscillates – unlike other manufacturers, where the whole of the rear end oscillates.
This means the weight of the machine is always moving in the same direction as the bucket, which in turn increases the pressure on the ground when backing up.
4
LIFTING FRAME
Z-KINEMATICThe Z-kinematics is characterised by a short, curved lifting arm with a central tilt level. The low position of lifting frame and tilt level gives the best possible view to the attachments and working area.
The maximum breakout force is achieved when the oil flow acts on the full surface of the piston. During dumping, the smaller surface on the piston rod side is supplied with oil, which generates greater speed and dumping can take place quickly. For using pallet fork operation, the parallel movement can be adjusted by minimal correction of the tipping cylinder. For using bucket, the bucket returns automatically to the digging position.
HYDRAULIC QUICK HITCHThe articulated steering makes it possible to align the quick coupler with the attachment tool and intertwine the work piece
5
POWERLINE
ENGINEPowerful engine which delivers results in terms of operation and environmental protection. Fewer emissions, more power. Engine: EU Stage V, EPA TIER IV and Stage III A, EPA Tier IV Interim (V65).
Adopting European and American emission levels ensure a significant reduction in particulate emissions compared with previous levels – from 0.4 to 0.025 g/kWh.
TAKE ADVANTAGE OF THE NEW ENGINE TECHNOLOGY+ Lower fuel consumption really pays off.
+ Fresh air: pollutants in the emissions are reduced by up to 90%. Significantly fewer particulate are emitted thanks to the advanced exhaust after-treatment. This is achieved by means of improved combustion and injection systems and a diesel oxidation catalyst (DOC).
+ Drive characteristics have been optimised for the new engine to deliver performance and meet regulations.
hYDROSTATIC TRANSMISSIONHydrostatic high-pressure transmission, maximum productivity thanks to hydrostatic drive technology – smooth power development without interruption of traction.
WORKING HYDRAULICThe working hydraulic (3rd Section) work completely independently of the hydraulics for transmission. 3rd Section for operation of hydraulic quick coupler and common work tools.
Additional control circuit (4th Section*) for operation of special attachments, which requires hydraulic oil flow (optional). The 4th Section is also available with High Flow function (optional).
AUTOMATIC DIFFERENTIAL LOCKThe V65, V80 and V100 fits with permanent all-wheel drive and automatic self-locking differentials on the front and rear axles (35% locking effect). Both provide enhanced traction when traveling in a straight line and turning corners – perfect for bucket loading.
TRAVEL RIDE CONTROL*The travel ride control function induces a suspension effect in the boom cylinder thanks to an accumulator. This system improves the drivability of the loader when transporting loads on uneven ground or driving at high travel speed. This feature improves drastically the operator comfort.
TRACTIVE FORCEThe hydrostatic transmission is characterized by its high power and smooth adjustment. This results for the operator in high rim pull for effective pushing or digging and good travel performance even on steep inclines.
*Option for V65, V80 and V100.
V100 V80 V65
6
SMART CONTROL*
It has never been easier to match a construction machine precisely to the driver and application. Numerous controls have also been redesigned and rearranged for quicker operation and improved machine monitoring. The 3.5” display shows machinery and engine data. The modern menu guide is similar to current smartphones. The windscreen, which domes inwards, minimizes the mirror effect.
What this means for you:
+ Intuitive operation that is easy to set for each individual driver+ 3rd & 4th electric proportional hydraulic control circuit for operating work attachments+ New display design to enable easy machine monitoring+ Keypad with extra-large keys for easy operation
INSTRUMENTATION*
An aditional Keypad alows quick adjustment of a main installation.
ADJUSTABLE STEERING COLUMN/WHEELThe adjustable steering column is part of the standard equipment of the machine. It improves the operator comfort and makes it easier to enter and exit the cabin from both sides.
Electrical proportional adjustment of the hydraulic performance of the 3rd and 4th circuits.
Activation of the motion control function at specific speed.
Choice of units of measurement by country of residence.
* Not available for the V65. 7
OPERATOR STATION*
Designed with driver comfort and productivity in mind. The case feature ROPS and optional FOPS and noise and vibration damping - approved.
ALL-AROUND VISIBILITYVisibility is optimized through big windows. The optimal visibility leads to greater safety on jobsites. Front visibility is optimum on the attachment for faster and safer operation
second door+ Optimal cabine ventilation+ Communication possible on both sides+ Cabine easy to clean+ Improved visibility, even at ground level
COMFORTABLE & ADJUSTABLE SEATOur standard seat with hydraulic cushioning, adjustable in position and weight, makes it more comfortable for the driver.
PRECISE FINGERTIP CONTROl**
The fingertip control allows the operator to regulate the oil flow with real precision, all the way from
« zero » to « full ». The electrical proportional activation of hydraulic functions is simple thanks
to a thumbwheel on the joystick. A lot of attention has been paid to an outstanding
ergonomy to improve operator comfort.
* Picture shows interior of the V100.** Not available for the V65.
8
PERFORMANCE
TRAVEL SPEED Operating in a closed circuit, the hydrostatic travel drive delivers lots of power while keeping fuel consumption low. The wheel loaders can achieve up to 20km/h on the road.
As an option, V80 and V100 can also offer 0 to 30*/36km/h.
BRAKE INCHING PEDALBy using the brake inching pedal, fine-tuning of the hydraulic performance is possible. The driver can modify the power between the drive and the working hydraulics. It allows to slow down the loader while keeping the engine rpm up. This feature improves the cycle time of digging and loading operations. This inch brake pedal prevents wheel spin and avoids excessive wear of the tires.
* Only for the V65.
9
MAINTENANCEThe large opening offered by the engine hood allows an easy access to all main service items, for an easy and fast maintenance. This contributes to reduce the TCO of the machine. Daily tasks can be performed from ground level to save time.
Battery main switch *Can be accessed when standing
next to the cab.
Separate battery poles *Option : separate battery poles for easy restart thanks to free access under the engine hood.
Cabine cabling*
Simple disconnection of electrical lines when dismantling the cabine.
*Only for the V80 and V100.10
TAILORED FOR YOUR JOBIn order to provide a wheel loader adapted for the job, Yanmar offers numerous equipment packages and additional equipment. Using equipment tailored to the job helps increase productivity, reduce wear and damage.
PROTECTION PACKAGE FOR HARSH ENVIRONMENTS+ Special coating with 2K paint+ Piston rods for lift, tilt, and steering cylinders
with chrome/nickel coating (instead of the standard chrome coating)
LIFTING ARM+ Derating dump speed valves for lift and tilt cylinders
HYDRAULICS+ Fourth hydraulic control circuit+ Biodegradable hydraulic oil+ Pressure relief valve
ROAD PERMISSIONThe V65, V80 and V100 may be driven on the road and can be used with an optional towing hitch as a tractor unit.
CABINE+ FOPS II* modification kit protection against falling objects+ Heated external mirror+ Supplementary diesel heating (independent of engine)
with circulation system+ Sliding window on right-hand side+ Air conditioning+ LED working lights rear+ USB charger
MAINTENANCE+ Central lubrification+ Electric refueling pump
OPERATION+ Reverse signal+ Electronic immobiliser+ Creeper gear
* Available in option. 11
48901950 1175
2610
275032
00
180
41050
° 35°
60045°
109°
V65 DIMENSIONS
FORk lift attachment multi-purpose bucketCapacity (ISO 7546) : 0,60 m3
Max. density of material: 1,6 t/m3
General-purpose bucketCapacity (ISO 7546) : 0,65 m3
Max. density of material : 1,8 t/m3
Operating load over total lift range: :1650 ( 1750*) kg
Operating load in transport position :2050* kg
*With rear axle weights
Overall length 4 900 mmWheelbase 1 950 mmOverall height 2 610 mmGround clearance 410 mmOverall width (outside of tires) 1 650 mmOverall width (bucket) 1 700 mmDumping height (w/o teeth) 2 527 mmDumping reach (w/o teeth) 600 mmMax. hinge pin height 3 200 mmMax. lifting height 3 000 mmDigging depth 85 mmTilt back angle (at traveling position) Deg. 50°Dumping angle Deg. 45°Articulation angle Deg. 40°Turning radius (track circle) 1 830 mmTurning radius (bucket circle) 3 940 mm
Contents Density Width Dump height
General-purpose bucket, quick-attach system (QAS), teeth 0,65 m3 1,8 t/m3 1700 mm 2515 mmGeneral-purpose bucket, QAS, bolt-on cutting edge 0,65 m3 1,8 t/m3 1700 mm 2480 mmEarth bucket, QAS, teeth 0,72 m3 1,6 t/m3 1700 mm 2455 mmEarth bucket, QAS, bolt-on cutting edge 0,72 m3 1,6 t/m3 1700 mm 2420 mmLight-material bucket, bolt-on cutting edge 0,80 m3 1,2 t/m3 1700 mm 2420 mmLight-material bucket, bolt-on cutting edge 1,00 m3 0,8 t/m3 1850 mm 2380 mmMulti-purpose bucket, QAS 0,60 m3 1,6 t/m3 1700 mm 2485 mmSide-dump bucket, QAS, without teeth 0,50 m3 1,8 t/m3 1750 mm 2480 mmHigh-tip bucket, QAS, without teeth 0,65 m3 1,2 t/m3 1850 mm 3390 mmQuarry bucket, QAS 0,55 m3 1,8 t/m3 1850 mm 2500 mm
4900
1950 117526
10
2527
3200
70
410
50°
35°
60045°
109°
51901950 1175
2610
1320
3000
85 410
670
500
1265
285
165080°
40°
183017001330
3870
BUCKET TYPE
12
V65 SPECIFICATIONS
Lighting system in compliance with German and European standards.Halogen H7 headlamps.2 working floodlights front.
LIGHTING
[ STANDARD EQUIPMENT ]
Manufacturer, model Deutz, D 2011 L04
Combustion 4-stroke cycle, direct fuel Injection
Number of cylinders 4 in line
Displacement 3,100 cm3
Net power 36,4 kW / 50 HP 2 300 rpm
Cooling system External oil cooling
ENGINE
Nominal voltage 12 V
Battery 12 V / 100 Ah / 900 A (DIN-EN50342)
Generator 14 V / 95 A
Starter 12 V / 2,3 kW (3,1 HP)
Cold-starting aid Glow plugs 12 V
ELECTRICAL SYSTEM
Pump capacity 41 l/min
Working pressure 250 bar
Proportional hydraulic valve with 3 control circuits. Simultaneous, independent control of all movements. Single, four-way control lever (multi-function lever) for tilt and lift cylinder with integrated travel direction selector switch and switch for additional control circuit. Float position in control circuit "Lowering", electro-hydraulically operated. Hydraulic cylinders : 2 lifting cylinders, 2 tilt cylinder, all dual-action.The thermostatically controlled oil circuit ensures that the oil temperature is promptly reached and avoids overheating. Return filter installed in hydraulic tankallows for eco-friendly replacement of filter elements.
Hydraulically switchable float position by overdriving the pressure point « lower » on the joystick, electrically switchable continuous operation function.
Single, four-way control lever (joystick) with integrated direction-of-travel switch and switch for additional control circuit.
HYDRAULIC SYSTEM
CABINE
Rubber-mounted full-vision steel cabine, ROPS.
Cabine featuring two doors.
Electric windscreen.
Intermittent wipers and washer (front & rear).
Panoramic safety glass.
Sliding window on left-hand side.
Cab heating by engine coolant heat exchanger with 3-speed heater fan.
Windscreen defroster front & rear.
Radio pre-installation.
13
V65 SPECIFICATIONS
Front : rigid planetary final drive axle, centre-mounted disc brake. Limites slip-type differential 35%.
Rear : oscillating planetary final drive axle, with integrated reduction gear, oscillation locking with slewed uppercarriage. Limited slip-type differential 35%.
Angle of oscillation ± 12°.
Service brake hydraucally actuated centre-mounted disc brake, acting in all 4 wheels via 4-wheel drive.
Auxiliary brake hydrostatic through closed-circuit travel drive.
Parking brake mechanically actuated centre-mounted disc brake on front axle.
Tires 365 / 70 R18 SPT9 Dunlop.
FRAME AND TIRES
Effective values of acceleration below for entire body 0.5 m/s²And for upper limbs 2.5 m/s²
VIBRATION VALUES IN COMPLIANCE WITH DIRECTIVE 2006 / 42 / EC & EN474
Fuel tank 75 l
Hydraulic tank 60 l
CAPACITIES
PERFORMANCETravel speed 0 – 20 km/h
Static tipping Load Straight 2750 kg
Static Tipping Load Full Turn 2475 kg
Breakout force (bucket) 42 kN
Traction force 31,6 kN
General purpose bucket (ISO 7546) 0.65 m³
Gradability 30°
Noise level LwA 101 dB / LpA 75 dB
SAFETY
Steering system : articulated steering, fully hydraulic, 1 steering cylinder with final positioning damping on both sides, oil supply via load-sensing priority valve, quick and easy steering even at engine idle-running speed.
Total steering angle 80°
Driver’s seat with hydraulic cushioning, weight adjustable, longitudinal and height adjustment and lap belt in compliance with ISO 7096 & ISO 6683.
Rear-view mirrors foldable.
Self-lock differential 35% in front and rear axle.
Inch brake pedal.
Change engine sump oil 1 000h
Change engine oil filter 1 000h
Change engine fuel filter 1 000h
Change hydraulic oil 1 000h
Change cooling fluid according to demand (at least all 2 years)
MAINTENANCE FREQUENCY
Multifunktions display / Smart Control : the driver can adjust the machine exactly to the environment, operation, and individual specific requirements.
MISCELLANEOUS14
V65 SPECIFICATIONS
[ OPTIONAL EQUIPMENT ]
ENGINE
High-speed version 30 km/h | Guard for fan wheel.
HYDRAULIC SYSTEM
4th control circuit and installation on lift frame, incl. couplings and continuous operation e. g. for attachments with 2 hydr. functions | 4th control
circuit, single-acting, with pressureless returne and installation at rearend | Hydraulic outlet for front hand-held hammer, with flow divider | Open
return, on lift frame | Bypass filter Kleenoil.
CABINE
FOPS II skylight guard | Yellow beacon | Independent diesel heating with timer | Right-hand door with sliding window | Radio installation kit | Working
floodlight | Air conditioning.
CHASSIS AND TIRES
340 / 80 R 18 MPT 70 E Conti | 365 / 70 R 18 EM 01 Mitas | 365 / 70 R 18 MPT 70 E Conti | Non-standard tires available on request
SAFETY | Bucket & loader arm cylinder safety block valve | Loader arm cylinder safety block valves | Descent regulation valve.
COUPLERS
Ball head coupler | Rockinger trailor coupling.
MISCELLANEOUS
Special paint | Bio oil | Anti-theft device (immobiliser) | Electrical tank refilling pump | Rear axle weights, approx. 200kg | Back-up alarm for
reverse travel | Travel Ride control system | Further optional equipment available on request.
15
FORK LIFT ATTACHMENT MULTI-PURPOSE BUCKET
GENERAL-PURPOSE BUCKET
Contents Density Width Dump height
General-purpose bucket, quick-attach system (QAS), teeth 0,80 m3 1,8 t/m3 1850 mm 2550 mmGeneral-purpose bucket, QAS, bolt-on cutting edge 0,80 m3 1,8 t/m3 1850 mm 2510 mmEarth bucket, QAS, teeth 0,90 m3 1,6 t/m3 1850 mm 2485 mmEarth bucket, QAS, bolt-on cutting edge 0,90 m3 1,6 t/m3 1850 mm 2445 mmLight-material bucket, bolt-on cutting edge 1,00 m3 1,2 t/m3 1850 mm 2435 mmLight-material bucket, bolt-on cutting edge 1,20 m3 0,8 t/m3 1950 mm 2395 mmMulti-purpose bucket, QAS 0,75 m3 1,6 t/m3 1850 mm 2525 mmMulti-purpose bucket, QAS, bolt-on cutting edge 0,75 m3 1,6 t/m3 1850 mm 2485 mmSide-dump bucket, QAS, without teeth 0,70 m3 1,8 t/m3 1850 mm 2450 mmHigh-tip bucket, QAS, without teeth 0,70 m3 1,2 t/m3 1850 mm 3540 mmQuarry bucket, QAS 0,70 m3 1,8 t/m3 1850 mm 2530 mm
Capacity (ISO 7546): 0.80 m3
Max. density of material: 1,8 t/m3
Capacity (ISO 7546): 0.75 m3
Max. density of material: 1.6 t/m3Operating load over total lift range:
2,050 (2,250*) kgOperating load in transport position:
2,500* kg*With rear axle weights
Overall length 5080 mmWheelbase 2100 mmOverall height 2640 mmGround clearance 435 mmOverall width (outside of tires) 1780 mmOverall width (bucket) 1850 mmDumping height (w/o teeth) 2550 mmDumping reach (w/o teeth) 710 mmMax. hinge pin height 3220 mmMax. lifting height 3030 mmDigging depth 135 mmTilt back angle (at traveling position) Deg. 50°Dumping angle Deg. 45°Articulation angle Deg. 40°Turning radius (track circle) 1960 mmTurning radius (bucket circle) 4160 mm
V80 DIMENSIONS
BUCKET TYPE
5060
2100 122726
40
255032
00
100
43550
°
112°
35°
70045°
40°
80°
1780
R4110
18501390
R1960
5070
2100100
1010
252528
203200
715
435
1227
2640
35°
45°
50°
112°
400
1280500
720
2100 1227
2640
435 30°
5660
1385
3100
50
16
Lighting system in compliance with StVZO and European standards.Halogen H7 headlamps.2 working floodlights front.
LIGHTING
[ STANDARD EQUIPMENT ]
Manufacturer, model Yanmar 4TNV98C
Type Turbo diesel engine with intercooler, exhaust-gas optimised EU Stage V, EPA Tier IV
Guard for fan wheel
Combustion 4-stroke cycle, Common Rail injection
Number of cylinders 4 in line
Displacement 3 318 cm3
Net power rating at 2,200 rpm (ISO 14396) 46,2 kW (63 HP)
Max. torque 241 Nm at 1,430 rpm
Cooling system Water
ENGINE
Nominal voltage 12 V
Battery 12 V / 77 Ah / 760 A (DIN-EN50342)
Generator 14 V / 95 A
Starter 12 V / 3,0 kW (4,1 HP)
Cold-starting aid Glow plugs 12 V
Battery main switch
ELECTRICAL SYSTEM
Pump capacity 65 l/min
Working pressure 250 bar
Proportional hydraulic valve four-way control lever (joystick) for the operation of the lift and tilt cylinders with integrated direction-of-travel and speed range button. 3rd additional control circuit <Fingertip control> with continuous operation function provided as standard. Simultaneous, independent control of all movements.
Hydraulic cylinders : 2 lifting cylinders, 1 tilt cylinder, all dual-action.
Hydraulically switchable float position by overdriving the pressure point « lower » on the joystick, electrically switchable continuous operation function.
Single, four-way control lever (joystick) with integrated swing function.
Controller, direction-of-travel switch and switch for addtional control circuit.
HYDRAULIC SYSTEM
CABINE
Rubber-mounted full-vision steel cabine, ROPS and optional FOPS.
Cabine featuring two doors.
Intermittent wipers and washer (front & rear).
Panoramic safety glass.
Sliding window on left-hand side.
Cab heating by engine coolant heat exchanger with 3-speed heater fan.
Windscreen defroster front & rear.
Radio pre-installation.
V80 SPECIFICATIONS
17
Front : rigid planetary final drive axle, centre-mounted disc brake. Limites slip-type differential 35%.
Rear : oscillating planetary final drive axle, with integrated reduction gear, oscillation locking with slewed uppercarriage. Limited slip-type differential 35%.
Angle of oscillation ± 10°.
Service brake hydraucally actuated centre-mouted disc brake, acting in all 4 wheels via 4-wheel drive.
Auxiliary brake hydrostatic through closed-circuit travel drive.
Parking brake mechanically actuated centre-mounted disc brake on front axle.
Tires 405/70 R 18 SPT9 Dunlop.
UNDERCARRIAGE AND TIRES
Effective values of acceleration below for entire body 0.5 m/s²And for upper limbs 2.5 m/s²
VIBRATION VALUES IN COMPLIANCE WITH DIRECTIVE 2006 / 42 / EC & EN474
Fuel tank 75 lEngine oil 8 l
Hydraulic tank 55 l
CAPACITIES
Change engine sump oil 500h
Change engine oil filter 500h
Change engine fuel filter 1 000h
Change hydraulic oil 1 000h
Change cooling fluid according to demand (at least all 2 years)
MAINTENANCE FREQUENCY
Multifunktions display / Smart Control : the driver can adjust the machine exactly to the environment, operation, and individual specific requirements.
MISCELLANEOUS
PERFORMANCETravel speed 0 – 20 km/h
Static tipping Load Straight 3770 kg
Static Tipping Load Full Turn 3330 kg
Breakout force (bucket) 43 kN
Traction force 42 kN
General purpose bucket (ISO 7546) 0.80 m³
Gradability 30°
Noise level LwA 101 dB / LpA 75 dB
SAFETYSteering system : articulated steering, fully hydraulic, 1 steering cylinder with final positioning damping on both sides, oil supply via load-sensing priority valve, quick and easy steering even at engine idle-running speed.
Total steering angle 80°
Driver’s seat MSG85 with hydraulic suspension, weight adjustable, longitudinal and height adjustment and lap belt in compliance with ISO 7096 & ISO 6683.
Rear-view mirrors foldable.
Self-lock differential 35% in front and rear axle.
Inch brake pedal.
V80 SPECIFICATIONS
18
[ OPTIONAL EQUIPMENT ]
HYDRAULIC SYSTEM
4th control circuit and installation on lift frame, incl. couplings and continuous operation e. g. for attachments with 2 hydr. functions | Hydraulic outlet for front hand-held hammer, with flow divider | Open return, on lift frame | Pressure relief valve.
CABINE
FOPS skylight guard | Yellow beacon | Right-hand door with sliding window | Radio installation kit | Working floodlight | Air-conditioning | LED working lights rear | USB charger.
CHASSIS AND TIRES
405/70 R 18 EM 01 Mitas | 340/80 R18 TRI2 Nokian | 340/80 R 20 XMCL Michelin | 335/80 R 20 MPT E-70 Conti | 400/70 R 20 IT520 Goodyear | 405/70 R 20 SPT9 Dunlop | 405/70 R 20 EM01 Mitas | 500/45-20 J331 Alliance | Non-standard tires available on request.
SAFETY
Bucket & loader arm cylinder safety block valve | Descent regulation valve.
COUPLERS
Ball head coupler | Rockinger trailor coupling.
MISCELLANEOUS
Central lubrification unit | Special paint | Bio oil | Anti-theft device (immobiliser) | Electrical tank refilling pump | Rear axle weights, approx. 260 kg | Pilot-controlled hose-rupture valves for lift and tilt cylinders | Quick couplers (flat face) for 3rnd control circuit on lift frame | Back-up alarm for reverse travel | Travel Ride control system | Acceptance as agricultural or forestry tractor | Further optional equipment available on request | High-speed version 36 km/h.
V80 SPECIFICATIONS
19
Overall length 5 360 mmWheelbase 2 220 mmOverall height 2 765 mmGround clearance 460 mmOverall width (outside of tires) 1 850 mmOverall width (bucket) 1 950 mmDumping height (w/o teeth) 2 625 mmDumping reach (w/o teeth) 825 mmMax. hinge pin height 3 370 mmMax. lifting height (Forks) 3 150 mmDigging depth 140 mmTilt back angle (at traveling position) Deg. 50°Dumping angle Deg. 45°Articulation angle Deg. 40°Turning radius (track circle) 2 155 mmTurning radius (bucket circle) 4 465 mm
Contents Density Width Dump height
General-purpose bucket, quck attach system (QAS), teeth 1,00 m³ 1,8 t/m3 1 950 mm 2 635 mmGeneral-purpose bucket, QAS, bolt-on cutting edge 1,00 m³ 1,8 t/m3 1 950 mm 2 595 mm
Earth bucket, QAS, teeth 1,10 m³ 1,6 t/m3 1 950 mm 2 585 mm
Earth bucket, QAS, bolt-on cutting edge 1,10 m³ 1,6 t/m3 1 950 mm 2 545 mm
Light-material bucket, bolt-on cutting edge 1,35 m³ 1,2 t/m3 2 050 mm 2 510 mm
Light-material bucket, bolt-on cutting edge 1,55 m³ 0,8 t/m3 2 200 mm 2 485 mm
Multi-purpose bucket, QAS 0,90 m3 1,6 t/m3 1 950 mm 2 610 mm
Side-dump bucket, QAS, without teeth 0,85 m3 1,8 t/m3 2 050 mm 2 515 mm
High-tip bucket, QAS, without teeth 1,00 m3 1,2 t/m3 2 050 mm 2 835 mm
Quarry bucket, QAS 0,90 m3 1,8 t/m3 2 050 mm 3 610 mm
Compost bucket 1,05 m3 1,8 t/m3 2 050 mm 2 625 mm
FORK LIFT ATTACHMENT MULTI-PURPOSE BUCKET
GENERAL-PURPOSE BUCKETCapacity (ISO 7546): 1.00 m3
Max. density of material: 1,8 t/m3
Capacity (ISO 7546): 0.90 m3
Max. density of material: 1.6 t/m3
Operating load over total lift range: 2,400 (2,550*) kgOperating load in transport position: 3,100* kg
*With rear axle weights
BUCKET TYPE
R2,090
R4,445
1,85
0
80° 40
°
1,5101,950
5,350
730
3,37
02,
820
100
2,61
0
1,04
0
45°
116° 2,220 1,285
2,76
5
460
39°
5,320
2,220 1,2852,
765
2,63
53,37
0
100
460
50°
39°
710
45°
116°
5,830
1,350
410
3,25
51,
505
670
45
500
2,220 1,227
2,76
5
460 39°
V100 DIMENSIONS
20
Lighting system in compliance with StVZO and European standards.Halogen H7 headlamps.2 working floodlights front.
LIGHTING
[ STANDARD EQUIPMENT ]
Manufacturer, model Yanmar 4TNV98CT
Type Turbo diesel engine with intercooler, exhaust-gas optimised EU Stage V, EPA Tier IV
Combustion 4-stroke cycle, Common Rail Injection
Number of cylinders 4 in line
Displacement 3 318 cm3
Net power rating at 2,200 rpm (ISO 14396) 53,7 kW (73 HP)
Max. torque 308 Nm at 1,365 rpm
Cooling system Water
Guard for fan wheel.
ENGINE
Nominal voltage 12 V
Battery 12 V / 77 Ah / 760 A (DIN-EN50342)
Generator 14 V / 95 A
Starter 12 V / 3,0 kW (4,1 HP)
Cold starting aid Glow plugs 12 V
Battery main switch.
ELECTRICAL SYSTEM
Pump capacity 76l /min
Working presure 250 bar
Proportional hydraulic valve with 3-way control lever (joystick) for the operation of the lift and tilt cylinders with integrated direction-of-travel and speed range button. 3rd additional control circuit <Fingertip control> with continuous operation function provided as standard. Simultaneous, independent control of all movements.
Hydraulic cylinders : 2 lifting cylinders, 1 tilt cylinder, all dual-action.
Hydraulically switchable float position by overdriving the pressure point « lower » on the joystick, electrically switchable continuous operation function.
Single, four-way control lever (joystick).
Controller, direction-of-travel switch and switch for additional control circuit.
HYDRAULIC SYSTEM
CABINE
Rubber-mounted full-vision steel cabine, ROPS and optional FOPS.
Cabine featuring two doors.
Intermittent wipers and washer (front & rear).
Panoramic safety glass.
Sliding window on left-hand side.
Cab heating by engine coolant heat exchanger with 3-speed heater fan.
Windscreen defroster front & rear.
Radio pre-installation.
V100 SPECIFICATIONS
21
Front : rigid planetary final drive axle, centre-mounted disc brake. Limites slip-type differential 35%
Rear : oscillating planetary final drive axle, with integrated reduction gear, oscillation locking with slewed uppercarriage. Limited slip-type differential 35%
Angle of oscillation ± 10°
Service brake hydraulically actuated centre-mouted disc brake, acting in all 4 wheels via 4-wheel drive
Auxiliary brake hydrostatic through closed-circuit travek drive
Parking brake mechanically actuated centre-mounted disc brake on front axle
Tires 405 /70 R 20 SPT9 Dunlop
AXLE, BRAKES AND TIRES
Effective values of acceleration below for entire body 0.5 m/s²And for upper limbs 2.5 m/s²
VIBRATION VALUES IN COMPLIANCE WITH DIRECTIVE 2006 / 42 / EC & EN474
Fuel tank 100 lEngine oil 8 l
Hydraulic tank 88 l
CAPACITIES
Change engine sump oil 500h
Change engine oil filter 500h
Change engine fuel filter 1 000h
Change hydraulic oil 1 000h
Change cooling fluid according to demand (at least all 2 years)
MAINTENANCE FREQUENCY
PERFORMANCETravel speed 0 – 20 km/h
Static tipping Load Straight 4,370 kg
Static Tipping Load Full Turn 3 860 kg
Breakout force (bucket) 62,5 kN
Traction force 47,8 kN
General purpose bucket (ISO 7546) 1.00 m³
Gradability 30°
Noise level LwA 101 dB / LpA 76 dB
SAFETY
Steering system : articulated steering, fully hydraulic, 2 steering cylinders with final positioning damping on bothsides, oil supply via load-sensing priority valve, quick and easy steering even at engine idle-running speed
Total steering angle 80°
Driver’s seat MSG85 with hydraulic cushioning, weight adjustable, longitudinal and height adjustment and lap beltin compliance with ISO 7096 & ISO 6683
V100 SPECIFICATIONS
22
[ OPTIONAL EQUIPMENT ]
HYDRAULIC SYSTEM
4th control circuit and installation on lift frame, incl. couplings and continuous operation e. g. for attachments with 2 hydr. functions Hydraulic outlet for front hand-held hammer, with flow divider | Open return, on lift frame | Bypass filter Kleenoil | Pressure relief valve.
CABINE
FOPS skylight guard | Yellow beacon | Right-hand door with sliding window | Radio installation kit | Working floodlight | Air-conditioning | LED working lights rear | USB charger..
TIRES
405 /70 R20 EM01 Mitas | 360/80 R20 TRI2 Nokian | 380/75 R 20 XMCL Michelin | 400/70 R 20 XMCL Michelin | 405/70 R 20 MPT E-70 Conti 405/70 R 20 XZSL Michelin | 500/45-20 J331 Alliance (wide tires) | Non-standard tires available on request.
SAFETY
Bucket & loader arm cylinder safety block valve | Descent regulation valve.
COUPLERS
Ball head coupler | Rockinger trailor coupling.
MISCELLANEOUS
Central lubrification unit | Special paint | Bio oil | Anti-theft device (immobiliser) | Electrical tank refilling pump | Rear axle weights, approx. 260 kg | Pilot-controlled hose-rupture valves for lift and tilt cylinders | Ride control system | High-speed version 36 kph | Further optional equipment available on request.
V100 SPECIFICATIONS
23
Yanmar Construction Equipment Europe25, rue de la Tambourine, 52100 SAINT-DIZIERFrance
www.yanmarconstruction.fr
GB_Z_0119
Prin
ted
in F
ranc
e –
Mat
eria
ls a
nd s
peci
ficat
ions
are
sub
ject
to
chan
ge f
rom
the
man
ufac
ture
r w
ithou
t no
tice
– Pl
ease
con
tact
you
r lo
cal Y
anm
ar C
onst
ruct
ion
Equi
pmen
t Eu
rope
dea
ler
for
furt
her
info
rmat
ion.