34
Your partner for drying solutions In association with

Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

  • Upload
    dohanh

  • View
    214

  • Download
    2

Embed Size (px)

Citation preview

Page 1: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Your partner for drying solutions

In association with

Page 2: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 2

Content 1 About Calmatech 3

2 Advantages of Calmatech Flash cures 4

3 QC Controller (10 Buttons) 5

4 Overview MW versions 6

5 Overview HTL versions 7

6 MHM SA-EVO 8

6.1 QC 4646 MW 8

6.2 QC 4646 HTL 9

7 MHM X-Type Plus 10

8 QC 4355 MW 10

8.1 QC 4355 HTL 11

9 MHM X-Type Plus LS 12

9.1 QC 4361 MW 12

9.2 QC 4361 HTL 13

10 MHM S-Type Xtreme 14

10.1 QC 4661 MW 14

10.2 QC 4661 HTL 15

11 MHM S-Type Xtreme LS 16

11.1 QC 4669 MW 16

11.2 QC 4669 HTL 17

12 MHM Synchroprint 4000 / MHM IQ-Oval 50x70cm 18

12.1 QC 4170 MW 18

12.2 QC 4170 HTL 19

13 MHM Synchroprint 4000 / MHM IQ-Oval 50x70cm 20

13.1 QC 5069 MW 20

13.2 QC 5069 HTL 21

14 MHM Synchroprint 4000 / MHM IQ-Oval 70x100cm 22

14.1 QC 70100 MW 22

14.2 QC 70100 HTL 23

15 MHM Synchroprint 4000/MHM IQ-Oval 70x100 and 80x110cm 24

15.1 QC 8044 MW 24

16 Transfer foil curing machines 26

16.1 QC 6080 MW 26

17 MHM E-Type 28

17.1 E-Cure MW 28

17.2 E-cure HTL 29

18 Flash Cure Stands 30

18.1 Small stand 30

18.2 Large stand 31

19 Accessories 32

19.1 Temperature sensor 32

19.2 Photocell 32

19.3 Foot switch 33

19.4 Wobble switch 33

Page 3: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 3

Calmatech is a world famous player in the market of drying and heating technologies. Our company designs and produces flash cures and tunnel dryers. These machines are used to dry the inks used in digital printing, screen printing, glass, porcelain, metal, and printing of transfers on textile. Calmatech continuously develops and renews its products based on customer requests, requirements and feedback. The fundamental idea at Calmatech is energy efficiency. Calmatech makes use of the latest technologies in infrared and UV drying. State of the art electronics make Calmatech machines efficient and reliable.

Calmatech flash cures excel in their versatility. The dryers can be used on various different carousels as well as on free, movable workstations. An easily reprogrammable controller allows the operator to adjust drying time and temperature in a virtually limitless range. It also has an automatic mode in which the dryer is externally controlled by the carousel. A temperature sensor can be integrated in every machine to ensure that the ink on delicate substrates can’t overheat. Due to clever lamp configuration a very even heat distribution on the surface is achieved. The specific features of the carbon medium wave IR lamps removes the need for a cool down station.

1 About Calmatech

Page 4: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 4

2 Advantages of Calmatech Flash cures Carbon Lamps Calmatech Flash cures are available in both an HTL and a MW version. The HTL version is equipped with HTL intermediate tungsten lamps. The MW version is equipped with MW medium wave Carbon lamps, this comes with some major advantages.

- MW Carbon lamps are designed to pulse, this means that machines equipped with MW Carbon lamps are far more energy efficient than machines equipped with regular tungsten lamps resulting in lower power consumption.

- The power consumption of MW lamps does not spike on initial start-up, this ensures a large number of machines can be started at the same time without risk of overloading fuses.

Controller All Calmatech flash cures are equipped with a high quality 10 button, neutral free controller. More information about the controller used in Calmatech flash cures can be found on page 5. Drying speed A very short drying time ensures that the Calmatech flash cure is never the bottleneck in the drying process. Logical names For naming purposes, Calmatech uses the dimensions of a machine’s drying surface. This way, the drying surface of a machine can be determined at a glance without the need to look at any of the technical specifications. Calmatech uses the MW lamp equipped version of the machine body to determine the name. Keep in mind that HTL equipped machines do not have the same drying surface as MW equipped machines.

Page 5: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 5

3 QC Controller (10 Buttons) Every machine is equipped with a QC controller. The controller has an easy to understand set of functions that allow the user to easily operate the machine. The QC controller provides a unique feature that will put the dryer into a low standby level when an input signal is not received for a pre-set adjustable amount of time. The power and time settings can be adjusted while the unit is in operation. Automatic mode allows the machine to be controlled trough an input socket. The pre-programmed settings can be changed by holding down the function button. The controller has two different operating modes. The first mode is the internal time base mode. In this mode the run signal is active for an adjustable time period without the need for an external complete signal. The second mode is the external complete signal mode. In this mode the run signal will remain active until an external complete signal is received. The operator can change the following settings.

Start delay

High Power level

Normal standby level

Low standby level

The time before the low standby level is activated

Drying time

Zone Indicator

Input / Output Indicator

Time display

Auto / Man Indicator

Power display

Zone Selection

Test Button

Time Setting

Function Button

Display Button

Power Setting

Page 6: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 6

4 Overview MW versions

MW series Technical specifications

Name Length Width Height Drying surface Fans Lamps Wattage 3x400V

Wattage 3x220V

Current 3x 400V

Current 3x 220V

MHM Part number 400V

MHM part number 220V

QC 4646 MW 850mm 564mm 315mm 410*460 mm 1 6x MW 3001 11,3 kW 10,4 kW 25A 41A ZUB000030 ZUB000030-2

QC 4355 MW 685mm 455mm 278mm 434*540 mm 2 6x MW 5001 12,7 kW 11,6 kW 19A 30A ZUB000013 ZUB000013-2

QC 4361 MW 755mm 455mm 276mm 425*610 mm 2 6x MW 7001 14,3 kW 13,0 kW 21A 34A ZUB000010 ZUB000010-2

QC 4661 MW 755mm 500mm 277mm 465*610 mm 2 6x MW 7001 14,3 kW 13,0 kW 21A 34A ZUB000015 ZUB000015-2

QC 4669 MW 855mm 500mm 278mm 465*690 mm 3 6x MW 4001 14,3 kW 13,0 kW 21A 34A ZUB000021 ZUB000021-2

QC 4170 MW 740mm 560mm 250mm 410*700 mm 2 9x MW 3001 17,0 kW 15,6 kW 25A 41A ZUB000017 ZUB000017-2

QC 5069 MW 852mm 560mm 250mm 499*690 mm 3 6x MW 4001 14,3 kW 13,0 kW 21A 34A ZUB000019 ZUB000019-2

QC 70100 MW 1170mm 730mm 270mm 700*1000 mm 6 9x MW 9001 38,1 kW 35,0 kW 55A 91A ZUB000023 ZUB000023-2

QC 8044 MW 957mm 463mm 240mm 800*434 mm 2 6x MW 6001 13,7 kW 12,6 kW 20A 33A ZUB000029 ZUB000029-2

QC 6080 MW 971mm 633mm 270mm 605*800 mm 3 9x MW 6003 13,9 kW XXX 21A XXX ZUB000028 XXX

E-Cure MW 850mm 489mm 269mm 460*410 mm 2 6x MW 3001 11,3 kW 10,4 KW 25A 41A ZUB000011 ZUB000011-2

Page 7: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 7

5 Overview HTL versions

HTL series Technical specifications

Name Length Width Height Drying surface Fans Lamps Wattage 3x400V

Wattage 3x220V

Current 3x 400V

Current 3x 220V

MHM Part number 400V

MHM part number 220V

QC 4646 HTL 850mm 564mm 315mm 460*460 mm 1 6x HTL 1701 11,1 kW 10,2kW 16A 27A ZUB000025 ZUB000025-2

QC 4355 HTL 685mm 455mm 278mm 370*636 mm 2 9x HTL1503 13,5 kW 12,4 kW 20A 32A ZUB000012 ZUB000012-2

QC 4361 HTL 755mm 455mm 276mm 370*706 mm 2 9x HTL 1503 13,5 kW 12,4 kW 20A 32A ZUB000033 ZUB000033-2

QC 4661 HTL 755mm 500mm 277mm 408*710 mm 2 9x HTL 1500 13,5 kW 12,4 kW 20A 32A ZUB000014 ZUB000014-2

QC 4669 HTL 855mm 500mm 278mm 408*809 mm 3 12x HTL 1500 18,0 kW 16,5 kW 26A 43A ZUB000020 ZUB000020-2

QC 4170 HTL 740mm 560mm 250mm 460*690 mm 2 9x HTL 1701 16,7 kW 15,3 kW 24A 40A ZUB000016 ZUB000016-2

QC 5069 HTL 852mm 560mm 250mm 460*810 mm 3 9x HTL 1701 16,7 kW 15,3 kW 24A 40A ZUB000018 ZUB000018-2

QC 70100 HTL 1170mm 730mm 270mm 650*1155 mm 6 18x HTL 2001 36,0 kW 33,0 kW 52A 86A ZUB000022 ZUB000022-2

E-Cure HTL 850mm 589mm 269mm 408*530mm 2 9x HTL 1500 13,5 kW 12,4 kW 20A 32A ZUB000035 ZUB000035-2

Page 8: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 8

6 MHM SA-EVO

6.1 QC 4646 MW The QC 4646 MW is designed for use in the MHM SA-EVO carousel. The drying width is 420+40=460mm. The drying length is 410mm. The total drying surface is 460*410mm. The QC 4646 is produced mainly as an HTL version. This is why for this machine the name is derived from the HTL version. For convenience the name was changed from QC 4546 to QC 4646. The QC 4646 MW is equipped with:

Medium wave IR carbon lamps.

10 button control panel.

Adjustable power setting.

Technical specifications

Length 850mm

Width 564mm

Height 315mm

Drying surface 460*410mm

Fans 1

Lamps 6x MW 3001

Wattage 11,3 kW

Current 3x 400V 25A

Current 3x 220V 41A

MHM Part Number

3x 400V ZUB000030

3x 220V ZUB000030-2

Page 9: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 9

6.2 QC 4646 HTL The QC 4646 HTL is designed for use in the MHM SA-EVO carousel. The drying width is 410+40=450mm. The drying length is 460mm. The total drying surface is 450*460mm. The QC 4646 is produced mainly as an HTL version. This is why for this machine the name is derived from the HTL version. For convenience the name was changed from QC 4546 to QC 4646. The QC 4646 HTL is equipped with:

Intermediate wave IR tungsten lamps.

10 button control panel.

Adjustable power setting.

Technical specifications

Length 850mm

Width 564mm

Height 315mm

Drying surface 450*460mm

Fans 1

Lamps 6x HTL 1701

Wattage 11,1 kW

Current 3x 400V 16A

Current 3x 220V 27A

MHM Part Number

3x 400V ZUB000025

3x 220V ZUB000025-2

Page 10: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 10

7 MHM X-Type Plus

8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. The drying width is 394+40=434mm. The drying length is 540mm. The total drying surface is 434*540mm. The name QC 4355 MW is derived from the dryer’s drying surface. The QC 4355 MW is equipped with:

Medium wave IR carbon lamps.

10 button control panel.

Adjustable power setting.

Technical specifications

Length 685mm

Width 455mm

Height 278mm

Drying surface 434*540mm

Fans 2

Lamps 6x MW 5001

Wattage 12,7 kW

Current 3x 400V 19A

Current 3x 220V 30A

MHM Part Number

3x 400V ZUB000013

3x 220V ZUB000013-2

Page 11: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 11

8.1 QC 4355 HTL The QC 4355 HTL is designed for use in the MHM X-Type Plus carousel. The drying length is 596+40=636mm. The drying width is 370mm. The total drying surface is 370*636mm. The MW’s drying surface is used for the name to prevent confusion between types. The QC 4355 HTL is equipped with:

Intermediate wave IR tungsten lamps.

10 button control panel.

Adjustable power setting.

Technical specifications

Length 685mm

Width 455mm

Height 278mm

Drying surface 370*636mm

Fans 2

Lamps 9x HTL 1503

Wattage 13,5 kW

Current 3x 400V 20A

Current 3x 220V 34A

MHM Part Number

3x 400V ZUB000012

3x 220V ZUB000012-2

Page 12: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 12

9 MHM X-Type Plus LS

9.1 QC 4361 MW The QC 4361 MW is designed for use in the MHM X-Type Plus LS carousel. The X-Type Plus LS is an LS, or long stroke, carousel. This means it has a larger drying length than the regular version. The drying width is 385+40=425mm. The drying length is 610mm. The total drying surface is 425*610mm. The name QC 4361 MW is derived from the dryer’s drying surface. The QC 4361 MW is equipped with:

Medium wave IR carbon lamps.

10 button control panel.

Adjustable power setting.

Technical specifications

Length 755mm

Width 455mm

Height 276mm

Drying surface 425*610mm

Fans 2

Lamps 6x MW 7001

Wattage 14,3 kW

Current 3x 400V 21A

Current 3x 220V 34A

MHM Part Number

3x 400V ZUB000010

3x 220V ZUB000010-2

Page 13: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 13

9.2 QC 4361 HTL The QC 4361 HTL is designed for use in the MHM X-Type Plus LS carousel. The X-Type Plus LS is an LS, or long stroke, carousel. This means it has a larger drying length than the regular version. The drying length is 666+40=706mm. The drying width is 370mm. The total drying surface is 370*706mm. The MW’s drying surface is used for the name to prevent confusion between types. The QC 4361 HTL is equipped with:

Intermediate wave IR tungsten lamps.

10 button control panel.

Adjustable power setting.

Technical specifications

Length 755mm

Width 455mm

Height 276mm

Drying surface 370*706mm

Fans 2

Lamps 9x HTL 1503

Wattage 13,5 kW

Current 3x 400V 20A

Current 3x 220V 32A

MHM Part Number

3x 400V ZUB000033

3x 220V ZUB000033-2

Page 14: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 14

10 MHM S-Type Xtreme

10.1 QC 4661 MW The QC 4661 MW is designed for use in the MHM S-Type Xtreme carousel. The drying width is 425+40=465mm. The drying length is 610mm. The total drying surface is 465*610mm. The name QC 4661 MW is derived from the dryer’s drying surface. The QC 4661 MW is equipped with:

Medium wave IR carbon lamps.

10 button control panel.

Adjustable power setting. Old names:

QC 4560 MW

QC 20 S.

Technical specifications

Length 755mm

Width 500mm

Height 277mm

Drying surface 465*610mm

Fans 2

Lamps 6x MW 7001

Wattage 14,3 kW

Current 3x 400V 21A

Current 3x 220V 34A

MHM Part Number

3x 400V ZUB000015

3x 220V ZUB000015-2

Page 15: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 15

10.2 QC 4661 HTL The QC 4661 HTL is designed for use in the MHM S-Type Xtreme carousel. The drying length is 670+40=710mm. The drying width is 408mm. The total drying surface is 408*710mm. The MW’s drying surface is used for the name to prevent confusion between types. The QC 4646 HTL is equipped with:

Intermediate wave IR tungsten lamps.

10 button control panel.

Adjustable power setting. Old names:

QC 4560 HTL.

Technical specifications

Length 755mm

Width 500mm

Height 277mm

Drying surface 408*710mm

Fans 2

Lamps 9x HTL 1500

Wattage 13,5 kW

Current 3x 400V 20A

Current 3x 220V 32A

MHM Part Number

3x 400V ZUB000014

3x 220V ZUB000014-2

Page 16: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 16

11 MHM S-Type Xtreme LS

11.1 QC 4669 MW The QC 4669 MW is designed for use in the MHM S-Type Xtreme LS carousel. The S-Type Xtreme LS is an LS, or long stroke, carousel. This means it has a larger drying length than the regular version. The drying width is 425+40=465mm. The drying length is 690mm. The total drying surface is 465*690mm. The name QC 4669 MW is derived from the dryer’s drying surface. The QC 4669 MW is equipped with:

Medium wave IR carbon lamps.

10 button control panel.

Adjustable power setting. Old names:

QC 4580 MW.

Technical specifications

Length 855mm

Width 500mm

Height 278mm

Drying surface 465*690mm

Fans 3

Lamps 6x MW 4001

Wattage 14,3 kW

Current 3x 400V 21A

Current 3x 220V 34A

MHM Part Number

3x 400V ZUB000021

3x 220V ZUB000021-2

Page 17: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 17

11.2 QC 4669 HTL The QC 4669 HTL is designed for use in the MHM S-type Xtreme LS carousel. The S-Type Xtreme LS is an LS, or long stroke, carousel. This means it has a larger drying length than the regular version. The drying length is 769+40=809mm. The drying width is 408mm. The total drying surface is 408*809mm. The MW’s drying surface is used for the name to prevent confusion between types. The QC 4646 HTL is equipped with:

Intermediate wave IR tungsten lamps.

10 button control panel.

Adjustable power setting. Old names:

QC 4580 HTL.

Technical specifications

Length 855

Width 500

Height 278

Drying surface 408*809 mm

Fans 3

Lamps 12x HTL 1500

Wattage 18,0 kW

Current 3x 400V 26

Current 3x 220V 43

MHM Part Number

3x 400V ZUB000020

3x 220V ZUB000020-2

Page 18: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 18

12 MHM Synchroprint 4000 / MHM IQ-Oval 50x70cm

12.1 QC 4170 MW The QC 4170 MW is designed for use in the MHM Synchroprint 4000 and IQ-Oval 50x70cm carousels. This machine can be used when the lamps have to be mounted across the drying surface width. The drying length is 659+40=699mm. The drying width is 410mm. The total drying surface is 410*699mm. The name QC 4170 MW is derived from the dryer’s drying surface. The QC 4170 MW is equipped with:

Medium wave IR carbon lamps.

10 button control panel.

Adjustable power setting. Old names:

QC 4670 MW.

QC 20.

Technical specifications

Length 740mm

Width 560mm

Height 250mm

Drying surface 410*699mm

Fans 2

Lamps 9x MW 3001

Wattage 17 kW

Current 3x 400V 25A

Current 3x 220V 41A

MHM Part Number

3x 400V ZUB000017

3x 220V ZUB000017-2

Page 19: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 19

12.2 QC 4170 HTL The QC 4170 HTL is designed for use in the MHM Synchroprint 4000 and IQ-Oval 50x70cm carousels. This machine can be used when the lamps have to be mounted across the drying surface width. The drying length is 650+40=690mm. The drying width is 460mm. The total drying surface is 460*690mm. The MW’s drying surface is used for the name to prevent confusion between types. The QC 4170 HTL is equipped with:

Intermediate wave IR tungsten lamps.

10 button control panel.

Adjustable power setting. Old names:

QC 4670 HTL.

QC 20 HTL.

Technical specifications

Length 740mm

Width 560mm

Height 250mm

Drying surface 460*690mm

Fans 2

Lamps 9x HTL 1701

Wattage 16,7 kW

Current 3x 400V 24A

Current 3x 220V 40A

MHM Part Number

3x 400V ZUB000016

3x 220V ZUB000016-2

Page 20: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 20

13 MHM Synchroprint 4000 / MHM IQ-Oval 50x70cm

13.1 QC 5069 MW The QC 5069 MW is designed for use in the MHM Synchroprint 4000 and IQ-Oval 50x70cm carousels. This machine is used when the maximum curing area is required. The drying width is 459+40=499mm. The drying length is 690mm. The total drying surface is 499*690mm. The name QC 5096 MW is derived from the dryer’s drying surface. The QC 5069 MW is equipped with:

Medium wave IR carbon lamps.

10 button control panel.

Adjustable power setting. Old names:

QC 5070 MW.

QC 20 L.

Technical specifications

Length 852mm

Width 560mm

Height 250mm

Drying surface 499*690mm

Fans 3

Lamps 6x MW 4001

Wattage 14,3 kW

Current 3x 400V 21A

Current 3x 220V 34A

MHM Part Number

3x 400V ZUB000019

3x 220V ZUB000019-2

Page 21: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 21

13.2 QC 5069 HTL The QC 5069 HTL is designed for use in the MHM Synchroprint 4000 and IQ-Oval 50x70cm carousels. This machine is used when the maximum curing area is required. The drying length is 770+40=810mm. The drying width is 460mm. The total drying surface is 460*810mm. The MW’s drying surface is used for the name to prevent confusion between types. The QC 5069 HTL is equipped with:

Intermediate wave IR tungsten lamps.

10 button control panel.

Adjustable power setting.

MHM Part Number

3x 400V ZUB000018

3x 220V ZUB000018-2

Technical specifications

Length 852mm

Width 560mm

Height 250mm

Drying surface 460*810mm

Fans 3

Lamps 9x HTL 1701

Wattage 16,7 kW

Current 3x 400V 24A

Current 3x 220V 40A

Page 22: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 22

14 MHM Synchroprint 4000 / MHM IQ-Oval 70x100cm

14.1 QC 70100 MW The QC 70100 MW is designed for use in the MHM Synchroprint and IQ-Oval 70x100cm carousels. The drying width is 669+40=709mm. The drying length is 1000mm. The total drying surface is 709*1000mm. The name QC 70100 MW is derived from the dryer’s drying surface. The QC 70100 MW is equipped with:

Medium wave IR carbon lamps.

10 button control panel.

Adjustable power setting. Old names:

QC 30 MW.

Technical specifications

Length 1170mm

Width 730mm

Height 270mm

Drying surface 709*1000mm

Fans 6

Lamps 9x MW 9001

Wattage 38,1 kW

Current 3x 400V 55A

Current 3x 220V 91A

MHM Part Number

3x 400V ZUB000023

3x 220V ZUB000023-2

Page 23: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 23

14.2 QC 70100 HTL The QC 70100 HTL is designed for use in the MHM Synchroprint and IQ-Oval 70x100cm carousels. The drying length is 1115+40=1155mm. The drying length is 650mm. The total drying surface is 650*1155mm. The MW’s drying surface is used for the name to prevent confusion between types. The QC 70100 HTL is equipped with:

Intermediate wave IR tungsten lamps.

10 button control panel.

Adjustable power setting. Old names:

QC 30 HTL.

Technical specifications

Length 1170mm

Width 730mm

Height 270mm

Drying surface 650*1155mm

Fans 6

Lamps 18x HTL 2001

Wattage 36,0 kW

Current 3x 400V 52A

Current 3x 220V 86A

MHM Part Number

3x 400V ZUB000022

3x 220V ZUB000022-2

Page 24: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 24

15 MHM Synchroprint 4000/MHM IQ-Oval 70x100 and 80x110cm

15.1 QC 8044 MW The QC 8044 MW is designed for use in the MHM Synchroprint and IQ-Oval 70x100 and 80x110cm carousels. The drying width 394+40=434mm. The drying length is 800mm. The total drying surface is 800*434mm. The name QC 8044 MW is derived from the dryer’s drying surface. The QC 8044 MW is equipped with:

Medium wave IR carbon lamps.

10 button control panel.

Adjustable power setting.

MHM Part Number

3x 400V ZUB000029

3x 220V ZUB000029-2

Technical specifications

Length 957mm

Width 463mm

Height 240mm

Drying surface 800*434mm

Fans 2

Lamps 6x MW 6001

Wattage 13,7 kW

Current 3x 400V 20A

Current 3x 220V 33A

Page 25: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 25

Page 26: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 26

16 Transfer foil curing machines

16.1 QC 6080 MW The QC 6080 MW is a special flash cure designed for use in the MHM Synchroprint 4000 Carousel. It can only be mounted in a stand. It is strongly advised that a temperature sensor is ordered along with this machine. The drying width is 565+40=605mm. The drying length is 800mm. The total drying surface is 605*800mm The name QC 6080 MW is derived from the dryer’s drying surface. The QC 6080 MW is equipped with:

Medium wave IR carbon lamps.

10 button control panel.

Adjustable power setting. The QC 6080 MW is not available in the 3x220Volts configuration.

MHM Part Number

3x 400V ZUB000028

3x 220V XXXXXXXX

Technical specifications

Length 971mm

Width 633mm

Height 270mm

Drying surface 605*800mm

Fans 3

Lamps 9x MW 6003

Wattage 13,9 kW

Current 3x 400V 21A

Current 3x 220V Not available

Page 27: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 27

Page 28: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 28

17 MHM E-Type

17.1 E-Cure MW The E-Cure MW is designed for use in the MHM E-Type carousel. The drying length is 420+40=460mm. The drying length is 410mm. The total drying surface is 460*410mm. The E-Cure MW is equipped with:

Medium wave IR carbon lamps.

10 button control panel.

Adjustable power setting.

MHM Part Number

3x 400V ZUB000011

3x 220V ZUB000011-2

Technical specifications

Length 850mm

Width 489mm

Height 269mm

Drying surface 460*410mm

Fans 2

Lamps 6x MW 3001

Wattage 11,3 kW

Current 3x 400V 25A

Current 3x 220V 41A

Page 29: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 29

17.2 E-cure HTL The E-Cure HTL is designed for use in the MHM E-Type carousel. The drying length is 490+40=530. The drying length is 408mm. The total drying surface is 408*530mm. The QC 4641 HTL is equipped with:

Intermediate wave IR tungsten lamps.

10 button control panel.

Adjustable power setting.

MHM Part Number

3x 400V ZUB000035

3x 220V ZUB000035-2

Technical specifications

Length 850mm

Width 489mm

Height 269mm

Drying surface 408*530mm

Fans 2

Lamps 9x HTL 1500

Wattage 13,5 kW

Current 3x 400V 20A

Current 3x 220V 32A

Page 30: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 30

18 Flash Cure Stands

18.1 Small stand The small stand is a mobile dryer stand. Dryers compatible with the small stand:

QC 4355 MW / HTL.

QC 4361 MW / HTL.

QC 4661 MW / HTL.

QC 4170 MW / HTL.

QC 5069 MW / HTL. The stand can be used to easily operate and move Calmatech flash cures. The stand allows for easy adjustment of the dryer’s height. This way, the user can easily use the optimal lamp height above the ink.

QC 5069 stand. QC 4355 stand.

Page 31: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 31

18.2 Large stand The large stand is a mobile dryer stand. The large dryer stand is available for:

QC 6080 MW / HTL.

QC 70100 MW / HTL. The stand can be used to easily operate and move Calmatech flash cures. The stand allows for easy adjustment of the dryer’s height. This way, the user can easily use the optimal lamp height above the ink.

QC 70100 stand. QC 6080 stand.

Page 32: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 32

19 Accessories

19.1 Temperature sensor Every machine can be equipped with a temperature sensor. The temperature sensor can be used to measure the temperature of the ink. The temperature sensor is available in a regular (left) and micro (right) variant.

19.2 Photocell Every machine can be equipped with a photocell. The photocell can be used to give a start signal to the dryer. This is particularly useful if the carousel that the dryer is used on does not have the right input signal for the dryer’s controller. The photocell can output either a pulse signal or a continuous signal.

Page 33: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

Eerste Industrieweg 15b – 5451 GV Mill – The Netherlands – Tel. +31 243 975 444 – Fax +31 243 975 414 – www.calmatech.nl

Page 33

19.3 Foot switch Every machine can be equipped with a foot switch. The foot switch can be used to give a start signal to the dryer. This is particularly useful if the carousel that the dryer is used on does not have the right input signal for the dryer’s controller.

19.4 Wobble switch Every machine can be equipped with a wobble switch. The wobble switch can be used to give a start signal to the dryer. This is particularly useful if the carousel that the dryer is used on does not have the

right input signal for the dryer’s controller.

Page 34: Your partner for drying solutions - Fassi · PDF file7 MHM X-Type Plus 8 QC 4355 MW The QC 4355 MW is designed for use in the MHM X-Type Plus carousel. Eerste Industrieweg 15b –

The policy of the company is focused on continuous development and improvement. Calmatech BV reserves the right to modify its products at any time without further obligations.

Calmatech Address Eerste Industrieweg 15b

5451 GV Mill The Netherlands

Phone +31 243 975 444 Fax +31 243 975 414 E-Mail [email protected] Website www.calmatech.nl

Print date 12/05/2015 Version 1