Your Mining Partner English 2013_9957-0

Your Mining Partner

Your Mining Partner2

ReliabilityTo maximize equipment reliability, Liebherr combines manufacturing expertise with superior monitoring and diagnostic capabilities.

EfficiencyLiebherr combines the proven capa-bilities of previous models with new features that improve operational ef-ficiency.

ProductivityLiebherr Mining Equipment enables superior productivity by loading and hauling maximum tonnage in the shortest amount of time.

Your Mining Partner 3

Customer SupportLiebherr builds more than just mining equipment; Liebherr also builds cus-tomer partnerships.

SafetyMining demands an ever-vigilant fo-cus on safety, and Liebherr strict-ly adheres to industry standards. Liebherr equipment is designed to diminish risk even under the most extreme mining conditions.

EnvironmentLiebherr optimizes mining equip-ment for fuel economy, emission compliance, and extended service intervals.


ProductivityEach mine faces unique challenges, so Liebherr builds machines from the ground up to meet the

specific demands of mines worldwide. In order to ensure perfor-mance by design, Liebherr embraces the practice of vertical inte-gration, designing and building an array of components specifically for the rigorous conditions of the mining industry. While third party suppliers often resist component-level customi-zation for mining companies, Liebherr designs and builds compo-nents that meet the specific operational requirements of the custo-mer. Liebherrs component customization allows for optimal avail-ability, longer service life and superior productivity.


EfficiencyLiebherr has full control over the design and quality of its prod-ucts. From the individual component to the overall equipment,

Liebherr is able to minimize energy loss and increase efficiency. This trans-lates into higher output and reduced cost. Advanced features allow the operator to properly match engine and drive sys-tem performance to the job at hand and ultimately improve fuel economy. Litronic Plus sensors located in all equipment systems enable precise control to ensure proper power distribution within desired parameters and to maxi-mize efficiency.


ReliabilityEmploying the manufacturing expertise accumulated over the course of 60 years, Liebherr not only provides high quality machinery and services but also gives cus-

tomers insight into an array of key performance indicators for their equipment. Liebherr technology monitors all drive and equipment systems, providing on-board alerts to operators and service per-sonnel to enable rapid analysis, diagnosis and troubleshooting of potential issues. Moreover, Liebherr works closely with customers in analyzing equipment and component history to better interpret system or component conditions over time. This ability to identify meaningful and realistic part thresholds as well as provide clear, documented guidance for corrective action ensures reliability and slashes unscheduled maintenance time.

Preventative maintenance programs diminish the practice of time-based change-outs in favor of condition-based part replacement. As a result, Liebherr customers maximize equipment Mean Time to Fail (MTTF) while reducing Mean Time to Re-pair (MTTR). Liebherr customers can then leverage a collaborative, reliability-cen-tered strategy which supports continuous improvement and minimizes unexpected downtime.


Customer SupportWhen additional expertise is required, Liebherr offers tailored onsite service for the life of the purchased equipment. It also offers custom-

ized support solutions according to the specific needs of each mine.

Liebherr training offers a wide array of web-based, onsite and offsite learning op-tions that guarantee equipment operators and field service technicians receive com-prehensive knowledge from qualified Liebherr instructors. Liebherr training teams work closely with customer personnel to provide all levels of instruction.

When it is time for major component replacement, Liebherr offers remanufacturing capabilities with its component exchange program. All reconditioned components in the exchange program come with a same-as-new warranty and are available on-demand to customers for prompt installation, helping to minimize the duration of both scheduled and unplanned downtime.


SafetySafety is a foremost priority in all Liebherr design, manufac-ture, operation, service, and training. With a dedicated focus

on Design Failure Mode and Effects Analysis (DFMEA) during all phases of equipment design, Liebherr strictly adheres to industry standards. Liebherr minimizes operator fatigue with pressurized ergonomically-enhanced cabs that feature armored, laminated windows and ensure a low noise and vibration level. Easy machine and component access and egress, as well as anti-slip surfaces, enhance maintenance safety while advanced suppression systems aid in fire prevention. Liebherr employs ongoing training to educate mine person-nel on a wide range of safety topics including operator fa-tigue detection, maintenance precautions, and other crisis preventative procedures. Liebherr safety training minimizes the risk of operational interruptions that negatively impact daily productivity and ever-important profit margins.


EnvironmentLiebherr empowers environmental health and safety compa-ny-wide in every facility, for every product line and through-

out every service area. And by minimizing operational fuel consumption and emissions while extending component service life, Liebherr mining equipment significantly lowers the environmental impact for customers around the world.

Liebherr equipment generates only the power required for specific mining function, rather than delivering peak performance at all times. Liebherr opti-mizes mining equipment for fuel economy, emission compliance and extend-ed service intervals. In addition, Liebherr sound attenuation systems minimize noise impact on nearby communities.

By protecting the environment, Liebherr helps customers maintain consis-tently high performance levels.


R 9100 Operating Weightwith Backhoe Attachment: 108.500 kg / 239,200 lbwith Shovel Attachment: 113.500 kg / 250,200 lbEngine Output: 565 kW / 757 HPBucket Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 6,80 m / 8.9 ydShovel Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 7,00 m / 9.2 yd


R 984 COperating Weightwith Backhoe Attachment: 120.100 kg / 264,800 lbwith Shovel Attachment: 125.100 kg / 275,800 lbEngine Output: 504 kW / 675 HPBucket Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 7,00 m / 9.2 ydShovel Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 7,00 m / 9.2 yd


R 9250 Operating Weightwith Backhoe Attachment: 250.000 kg / 551,200 lbwith Shovel Attachment: 253.500 kg / 558,900 lbEngine Output: 960 kW / 1,287 HPBucket Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 15,00 m3 / 19.6 yd3

Shovel Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 15,00 m3 / 19.6 yd3


R 9350Operating Weightwith Backhoe Attachment: 302.000 kg / 665,800 lbwith Shovel Attachment: 310.000 kg / 683,400 lbEngine Output: 1.120 kW / 1,500 HPBucket Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 18,00 m3 / 23.5 yd3



R 9400 Operating Weightwith Backhoe Attachment: 345.500 kg / 760,600 lbwith Shovel Attachment: 353.000 kg / 778,200 lbEngine Output: 1.250 kW / 1,675 HPBucket Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 22,00 m / 28.8 ydShovel Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 22,00 m / 28.8 yd


R 995Operating Weightwith Backhoe Attachment: 441.000 kg / 972,200 lbwith Shovel Attachment: 450.000 kg / 992,100 lbEngine Output: 1.600 kW / 2,145 HPBucket Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 26,50 m3 / 34.7 yd3



R 996 B Operating Weightwith Backhoe Attachment: 672.000 kg / 1,481,500 lbwith Shovel Attachment: 676.000 kg / 1,490,300 lbEngine Output: 2.240 kW / 3,000 HPBucket Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 36,00 m / 47.1 ydShovel Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 34,00 m / 44.5 yd


R 9800Operating Weightwith Backhoe Attachment: 800.000 kg / 1,763,700 lbwith Shovel Attachment: 810.000 kg / 1,785,700 lbEngine Output: 2.984 kW / 4,000 HPBucket Capacity @ 1,8 t/m3 / 3,000 lb/yd3: 42,00 m3 / 54.9 yd3



T 264 Engine Output: 1.8642.013 kW / 2,5002,700 HPEmpty Vehicle Weight: 167 t / 184 tonPayload: 218 t / 240 tonGross Vehicle Weight: 385 t / 424 ton


T 284Engine Output: 2.6103.000 kW / 3,5004,023 HPEmpty Vehicle Weight: 237 t / 261 tonPayload: 363 t / 400 tonGross Vehicle Weight: 600 t / 661 ton


PR 764 Engine Output (SAE J1349): 310 kW / 416 HPOperating Weight: 52.680 kg / 116,150 lbBlade Capacity: 1417 m3 / 1822 yd3


L 586Tipping load, articulated: 20.430 kg / 45,040 lbBucket Capacity: 5,5 m3 / 7.2 yd3Operating Weight: 31.380 kg / 69,180 lbEngine Output (SAE J1349): 250 kW / 335 HP

Liebherr Sales and Service CompaniesLiebherr Production Facilities

Sales and Service Partners

So PauloSantiago de Chile

Guaratinguet

Belo Horizonte

San Juan

Rio de JaneiroCalama

Antofagasta

Bogota

Newport News

BurlingtonMontreal

Edmonton

Gillette

Fort McMurray

Elko

Accra

Jeddah

Khartoum

Cairo

Biggleswade

TarkwaCotonou

Luanda

Windhoek

Libreville

Abidjan

Casablanca Tunis

ColmarNussbaumen

Bischofshofen

BenaventeBaghdad

SofiaLallio

Telfs

Dammam

Kathu

Cape TownDurban

Springs

MiddleburgBrits Maputo

Dar es Salaam

Madrid Beijing

Shanghai

Moscow

Ulaanbaatar

St. Petersburg

NovosibirskKemerovo

Khabarovsk

BalikpapanSingapore

Islamabad

Bangkok

Almaty

Dubai CalcuttaMumbai

Baku

Tehran

Tashkent

Riyadh

Adelaide

PerthKalgoorlie

MackayBrisbane

Mt. Thorley

Auckland

Townsville

Subject to modification.

Liebherr Mining Partners Head Office Contact Details:

AmericaLiebherr Mining Equipment Newport News Co.4100 Chestnut AvenueNewport News, VA 23607, USAPhone: + 1 757 245 52 51E-Mail: [email protected]

Liebherr-Canada Ltd.1015 Sutton DriveBurlington, Ontario L7L 5Z8, CANADAPhone: +1 905 319 92 22E-Mail: [email protected]

Liebherr-Colombia SAS Via 40 No. 69-58, Bodegas A09 & A10Pq Ind. Y Comercial Via 40Barranquilla, COLOMBIAPhone: +57 (5) 349 39 49E-Mail: [email protected]

Liebherr Brasil Guindastes e MquinasOperatrizes Ltda.Rua Dr. Hans Liebherr, nr. 1 - Vila BelaCEP 12522-640 - Guaratinguet, SPBRAZILPhone: +55 12 31 28 42 42E-Mail: [email protected]

Liebherr-Argentina S.A.Gral. Mosconi 4587 Sur,Lateral Ruta 40 - RawsonSan Juan - Argentina, C.P. 5425, ARGENTINAPhone: +54 264 428 4449E-Mail: [email protected]

Liebherr Chile S.A.Av. Nueva Tajamar No 481,Of. 2103 y 2104Edificio World Trade Center, Torre SurLas Condes, Santiago - CHILEPhone: +56 2 580-1499E-Mail: [email protected]

AustraliaLiebherr-Australia Pty. Ltd.1 Dr. Willi Liebherr Drive,Para Hills WestSA, 5096, AUSTRALIAPhone: + 61 8 83 49 68 88E-Mail: [email protected]

AsiaLiebherr-Singapore Pte. LtdNo. 8 Pandan AvenueSINGAPORE 609384Phone: + 65 265 23 05 (ext 229)E-Mail: [email protected]

PT Liebherr-Indonesia PerkasaJl. Mulawarman RT 19 No. 17Kel. Manggar, Balikpapan 76116East Kalimantan, INDONESIAPhone: + 62 542 76 42 15E-Mail: [email protected]

Liebherr MachineryService (Shanghai) Co. Ltd.500 Fu Te Dong Er RoadWaiGaoQiao FTZ200131 Shanghai, P.R. CHINAPhone: + 86 21 50 46 19 88E-Mail: [email protected]

Liebherr India Private Limited R@ys IT Park, 6th Floor, Block En 9, Sector VSaltlake City700 106 Kolkata, INDIA Phone: + 86 21 50 46 19 88E-Mail: [email protected]

Monnis InternationalMonnis Tower, Chinggis Avenue-15, SBD-1Ulaanbaatar-14240, MONGOLIAPhone: + 976-11-311687E-Mail: [email protected] AfricaLiebherr-Africa (Pty.) Ltd. Fulcrum Industrial20 Vlakfontein RoadP.O. Box 841, SOUTH AFRICAPhone: +27 11 365 2000 E-Mail: [email protected]

Liebherr-Mining Ghana Ltd. Milne CloseAirport Residential Area, P.M.B K.I.AAccra, GHANAPhone: +233 30 2761063E-Mail: [email protected]

Liebherr-Mozambique LimitadaPestana Rovuma HotelRua da S, nmero 1144o Andar, Porta 31Maputo - MOZAMBIQUEPhone: + 258 82 3220250

EuropeLiebherr-Mining Equipment Colmar SAS49 rue Frdric Hartmann,FR-68025 Colmar Cedex, FRANCEPhone: +33 369 49 20 00E-Mail: [email protected]

Liebherr-Export AGGeneral-Guisanstrasse 14CH-5415, Nussbaumen, SWITZERLANDPhone: + 41 56 296 11 11E-Mail: [email protected]

Liebherr-Great Britain Ltd.Normandy LaneStratton Business ParkBiggleswade SG18 8QBGREAT BRITAINPhone: + 44 17 67 60 21 00E-Mail: [email protected]

Liebherr Ibrica, S.A.Carretera Nacional II, km 41Poligono Industrial MIRALCAMPOC/. Aluminio, 6 y 819200 Azuqueca de Henares(Guadalajara), SPAINPhone: +34 949 34 87 30E-Mail: [email protected]

Liebherr-Russland OOOul. 1-ja Borodinskaja, Haus 5121059 Moscow, RUSSIAPhone: + 7 095 9 33 07 75E-Mail: [email protected]

Printed in Germany BK-RP LFR/SP 10492038-2-03.13us

Liebherr-Mining Equipment Colmar SAS49 rue Frdric Hartmann, FR-68025 Colmar Cedex +33 369 49 20 00, Fax +33 369 49 23 18www.liebherr.com, E-Mail: [email protected]

Liebherr Mining Equipment Newport News Co.4100 Chestnut Avenue, Newport News, VA 23607, USA +1 (757) 245 5251, Fax +1 (757) 928 8755www.liebherr.us, E-Mail: [email protected]

Documents

Your Mining Partner English 2013_9957-0