th th25 - 26 July 2013

The Lalit, Mumbai, India.

23 July 2013 (11.37 am)

++

Your Knowledge Partner in Petrochem

08.50-09.00Kamal P. Nanavaty - President – Strategy Development, Reliance Industries Ltd.

09.00-09.20

Mahendra Patel - Vice Chairman, Ferromatik Milacron India Pvt. Ltd09.20-09.40

Ajay Shah - Sector Head – Polymer & Cracker, Reliance Industries Ltd.09.40-10.00

Tarmo Raudsepp - Vice President, Marketing Centre Moulding, Borouge Pte Ltd.10.00 -10.30

Session Chairman & Moderator Gautam Gandhi - Proprietor, Jolly Containers 10.30-10.50

Pradeep Rathod - Managing Director, Cello Group10.50-11.10

Anshu Bagai - Chief Marketing Officer, Tupperware11.10-11.30

S K Srivastava- Chief Manager - Technical, Kansai Nerolac Paints Ltd.11.30-11.50

Shankar Raman- Sr. GM. Western Region, Mold-Tek Packaging Limited.11.50-11.55 Q & A Session

Session Chairman & Moderator Francis Pinto - Ex-Chairman, Indian Plastic Institute11.55-12.30

Prof. h.c.mult. Helmar Franz - Executive Director & Chief Strategy Officer, Haitian International12.30-12.50

A. Dayanand Reddy- Managing Director, Vasantha Tool Crafts Pvt. Ltd. 12.50-13.05

Raju Desai – Chairman, Plastivision13.05-14.0514.05-14.25

V. Kannan - Managing Director, Mold-Masters Technologies Pvt. Ltd.14.25-14.45

Nandakumar T- President, Wittmann Battenfeld India Pvt. Ltd.14.45-14.50 Q & A Session

Session Chairman & Moderator Jayesh Khimji Rambhia - Managing Director, Premsons Plastics Pvt. Ltd.14.50-15.10

Pradeep Damle - General Manager, Bericap India Pvt. Ltd.15.10-15.30

Rajesh Sharma - Business Unit Director – Closures & Containers, SACMI Impianti India.15.30-15.35 Q & A Session15.35-16.05

Session Chairman & Moderator Pushp Raj Singhvi - Managing Director, Borouge India Pvt. Ltd.16.05-16.25 Raghavendra Mirji - Sr. General Manager & National Head, Godrej & Boyce Manufacturing Co Ltd.16.25-16.45

Subba Rao Sunkara - Head - Injection Molding, Amara Raja Batteries Ltd.16.45-17.00 Ankit Jain - Global Project Sr. - Material Tech, Whirlpool Corporation17.00-17.05 Q & A Session

Session Chairman & Moderator Bhaskar Ghosh- Sr. Vice President, Reliance Industries Ltd.17.05-17.25

M. P. Saju – Joint General Manager and Head - R&D, Toshiba Machines17.25-17.45

Umesh Malik - Chief Engineer - Sub Continent, ExxonMobil Lubricants Pvt Ltd.17.45.18.05

Raj Batlaw - Managing Director, Milliken Chemical Asia Pacific18.05-18.10 Q & A Session18.10-18.40

Moderator Kamal P. Nanavaty - President- Strategy Development, Reliance Industries Limited.18.40-19.05 SJ Taparia - The Supreme Industries Ltd./ Mahendra Patel - Ferromatik Milacron India Ltd./ Prof. h.c.mult. Helmar Franz -

Haitian International/ Sanjay Gandhi - Godrej Appliances/ Nilesh Shetye - Reliance Retail Ltd./ Puneet Madan - Reliance Industries Limited./ N. K Balgi - Ferromatik Milacron India Ltd./ Bhupesh Bafna – Polyset Plastics Pvt. Ltd.

19.05-19.15 Q & A Sessions19.15-19.35 Lifetime Achievement Awards19.35-19.5019.50 Dinner

Opening Remarks

Keynote Address I

Keynote Address II

Keynote Address III

Tea Break

Session-I Household Sector, Furniture and Packaging Sector

Session –II Machinery - Innovations in Injection Moulding Machines

Lunch & Networking

Session III Caps and Closures

Tea Break

Session IV Injection Moulding for Engineering Application

Session V Energy Conservation in Injection Moulding

Cocktail

Session VI Panel Discussion - Trends Dev. and Innovations

Lucky Dip

Advances in Injection Moulding Technology

Injection Moulding Business Perspective

Creating Value Through Innovation for Global Plastics Sustainability

Current Market Scenario, Innovative Products and Future Prospects - Furniture

Innovative Products, Current Status and Future Prospects

Pail & Paint and Inmould Decoration

Inmould Labelling and Thin wall Container

Trends and Challenges for the Injection Molding Technology

Moulds

Presentation on PlastiVision India 2013

Hot Runner System for Today's Injection Molding Industry

Robotic Automation for Plastics Application

Multicavity Injections Moulded Caps

Closures by Compression Molding & IPS

Injection Molding of Battery Cases – Requirements & Challenges

Energy Conservation In Moulding

ExxonMobil, Committed to Energy Efficiency and Sustainability

Conserving Energy in Polypropylene Molding via Specialty Additives

Day-1 – Injection Moulding Th25 July 2013

08.50-09.00

Kamal P. Nanavaty - President- Strategy Development, Reliance Industries Limited.

09.00-09.25

B Arun – Senior Executive - Vice President, Reliance Industries Ltd.

09.25-09.50

Dr. Sudhakar Mhaskar – Head of Technology, Marico Industries Limited.

Session Chairman & Moderator Kamal Agarwal - Managing Director, Alpha Group

09.50-10.10

Vimal Kedia - Managing Director, Manjushree Technopack Limited

10.10-10.30

Sunil Gulati - Director – Technical Services, Coca-Cola India Private Limited

10.30-10.50

Dr. Naoshi Kawamoto- General Manager Polymer Additives R&D, ADEKA Corporation

10.50-11.00 Q & A Session

11.00-11.30

11.30-11.50

Venkatesh Srinivasan– Market Manager – SAARC, Husky Injection Molding Systems Pvt. Ltd.

11.50-12.10

Amitabh Agrawal - General Manager - Sales and Marketing, ASB International Pvt. Ltd.

12.10-12.30

Pradeep Hada - Business Development Manager (Synergy), Sidel India Pvt. Ltd.

12.30-12.50

Rajesh Sharma - Business Unit Director – Closures & Containers, SACMI Impianti India.

12.50-13.10

Dhruv Shah - Executive Director, Prasad Group

13.10-13.20 Q & A Session

13.20-14.20

Session Chairman & Moderator Amish Shah - Business Head (Polyethylene), Reliance Industries Limited

14.20-14.40

G S Low - HDPE Technical Service Manager, Chevron Phillips Chemicals Asia Pvt Ltd.

14.40-15.00

Vagish Dixit - Managing Director, ALPLA India Private Limited

15.00-15.20

Puneet Deora - Managing Director, Graham Blowpack Pvt. Ltd.

15.20-15.40

Ramesh Ramachandran - Global Lead - Family Nutrition Packaging Development, GlaxoSmithKline

Consumer Healthcare Ltd.

15.40-16.00

Maneesh Sharma- Head - Pkg. Devp. R&D, Marico Industries Limited

16.00-16.10 Q & A Session

16.10-16.40

Session Chairman & Moderator K G Kapse - Vice President – Polymers, Reliance Industries Ltd.

16.40-17.00

Eric Hallstrom - Sales Manager – New Business Development, Uniloy North America

17.00-17.20

Dr. Surendra Agarwal - BOD, SPE Blow Molding Division - Chairperson, Technical Program Committee,

Creative Group of Industries

17.20-17.40

Dharmesh Parekh - General Sourcing Manager, Johnson & Johnson

17.40-18.00

Dr. P. Dasgupta - Ex - Head (Foods) Packaging - South East Asia, Unilever India

18.00-18.10 Q & A Session

18.10-18.25

18.25 Closing Remark

Opening Remarks

Keynote Address I

Keynote Address II

Session- I PET

Tea Break

Session II Machinery – Innovations in PET M/C

Lunch & Networking

Session-III Advances in Blow Moulding Part – 1

Tea Break

Session-IV Innovations in Blow Moulding Part - 2

Lucky Dip

Emerging Opportunities in PET

Packaging – The Face of FMCG

Recent Advances in PET Packaging for Foods & Beverages

Latest Trends in Global Beverage Market & Packaging

Novel Nucleating Agent for PET allows Down Gauging and Improved Productivity

Latest Innovation in High Cavitation Preform Manufacturing

Emerging Market for PET Container

The Driving Force in Liquid Packaging Solutions

Compression Blow Forming

World Class Manufacturing Through Automation

Performance Requirements of HDPE Blow Molded Parts

Recent Advances in Blow Molding of Containers for Personal, Homecare & Other Areas in FMCG Domain

Recent Advance in Multilayer Containers for Food

Blow Moulded Containers for Food

Personal Care- Molded Bottles and Containers

Advances in Blow Molding Technologies for Bottles & Containers

Recent Advances in Injection Blow Molded Containers in Pharma & Beyond

LCO (Low Cash Outlays)

Consumer Expectations from Injection & Blow Moulding Industry - Way Ahead.

Day-2 – Blow Moulding Th26 July 2013

Title ____________________________________ First Name ________________________________

Surname ______________________________________________ Position_____________________________

Company ____________________________________________________________________________________

Address ____________________________________________________________________________________

Country ____________________________________________________________________________________

Nature of Business ____________________________________________________________________________________

Telephone _______________________ Fax ___________________________________________

Mobile ____________________ E-mail ________________________________________

CONFERENCE INFORMATION

Venue: Mumbai, India

HOW TO REGISTER

Online Registration or

Call us +91-22-26000555/ 26000556 or Email your form to register@eliteplus.co.in or

Fax your completed form on +91-22-26000556 or

Post the completed form and payment to“Elite Plus”, 61/62, Radheya Building, 6th Floor,14th Road, Khar (W). Mumbai- 400 052

Please do send us the payment along with the filled registration form

DATE:th th

25 - 26 July 2013

RECEIPT OF YOUR REGISTRATION

Confirmation letter and invoice will be sent with receipt of your registration. Payment must be received prior to the conference date. If payment is not received, the

delegates may be asked to guarantee the payment with a credit card. Cancellation must be received by 31st June 2013 and will be subjected to deduction of 50% in

the total amount paid (in USD or INR). No cancellations will be made after this date. Substitutions can be made after this date. Substitutions can

be made at any time. It maybe necessary for reasons beyond the control of the organisers to alter the contents, speakers, timings or venue of this conference. ElitePlus++

does not accept any liability for any transport disruption or individual transport delays. In such circumstances, the normal

cancellation restriction apply.

th th6 Floor, Radheya, 14 Road, Khar (West), Mumbai 400 052, India. Tel.: 022-26000555 / 26000556. E-mail : register@eliteplus.co.in l www.eliteplus.co.in

PAYMENT :Outside India (USD) Bank Transfer (Payment by TT) to ICICI Bank Ltd., Khar Linking Road Branch, Mumbai 400052, Branch Account No.124005000039

Beneficiary: Elite Plus Business Services Pvt.Ltd. vide Swift Code: ICICINBBCTS. (Beneficiary Bank's Correspondent Bank, for USD transfer, is J P Morgan

Chase Bank, New York, Account No. 001 1 427374,

Within India (INR) RTGS / IFSC : Final Credit to ICICI Bank Ltd., Khar Linking Road Branch, Mumbai -400052, Account No. 124005000039 Beneficiary

Elite Plus Business Services Pvt.Ltd. RTGS / IFSC code: ICIC0001240. Cheque /DD Payment ; Cheque in the name of “Elite Plus Business Services Pvt. Ltd.”, th

payable at Mumbai, Posted to : Elite Plus Business Services Pvt.Ltd., 61-62, Radheya Building, 14 Road, Khar (W), Mumbai – 400052.

Online Payment (Credit Card): Visa, Mastercard and Diners accepted.

F All charges & Service Tax to be borne by the remitter.

Registration Form

CONFERENCE FEES

Registration fees include lunch, refreshments and documentation.

*Above rates are per person and inclusive of 12.36% service tax

GROUP REGISTRATION: Discount of 10% for 3 or more delegates.

Organised by

ELITEPLUS BUSINESS SERVICES

Injection Moulding & Blow Moulding Conference - 2013Th Th25 - 26 July 2013 - Mumbai, India.

Indian Delegates (INR)

Day - 1 Day - 2 Both the Days

Foreign Delegates (US$)

8200

BaseRate

ServiceTax

(12.36%)

Total BaseRate

ServiceTax

(12.36%)

Total BaseRate

ServiceTax

(12.36%)

Total

197

1014

24

9214

221

6500

156

803

19

7303

175

12500

300

1545

37

14045

337

CANCELLATION

Cancellation must be received by 31st June 2013 and will be subjected to deduction

of 50% in the total amount paid (in USD or INR).