Embed Size (px)
Citation preview
MODEL 55C ECONOMY LIQUID FILTER
FLOW RATES UP TO 760 LPM
pecofacet.comViton is a registered trademark of E.I. du Pont de Nemours and Company.
PECOFacet, Chemelean and PEACH are trademarks of PECOFacet.® indicates a PECOFacet trademark registered in the USA and various other countries.
ADDER OPTIONS
HOUSING NOMENCLATURE
55C
Model
1
# Cartridges
620
Cartridge Size
8
Housing Diameter
inches
275
Design PressurePSIG
CS
Material of Construction
STD
Design
620 = 6” (152.4mm) OD x 20” (508mm) L, DOE
640 = 6” (152.4mm) OD x 40” (1016mm) L, DOE
DOE - double open end style end caps
Chemelean® Housing 275=Carbon Steel
150=316L StainlessCS = Carbon SteelSS = 316L Stainless
STD = StandardCST = Custom
SUPPORTSLegs for Vertical Housing SupportItem# 23433 CHEMELEAN VERTICAL HOUSING STAND 8 INCH
FLANGES 50.8mm 150# Carbon Steel Threaded Inlet and Outlet Flange Connections (for carbon steel housings) Item# 25109 FLG 105 150 TDRF 2 SET
HOUSING MODELS
CARBON STEEL STANDARD HOUSINGS
Item# 23832 FLT 55C- 1-620-8- 275-CS-STD
Item# 23753 FLT 55C- 1-640-8- 275-CS-STDComes standard with the following buna-N closure gasket: Item# 23477 GSKT BUNA-N .275 RD x 9.375 OD 90 DURO
STAINLESS STEEL STANDARD HOUSINGS
Item# 24838 FLT 55C- 1-620-8- 150-SS-STD
Item# 24836 FLT 55C- 1-640-8- 150-SS-STDComes standard with the following buna-N closure gasket: Item# 24907 GSKT BUNA-N leave as .275 RD x 9.375 OD 70 DURO
Economy Liquid FiltersThe PECOFacet Chemelean® series liquid housings and cartridges offer versatility to adapt to a wide variety of process liquid applications up to 760 lpm. The housings come in two sizes to hold either a 508mm length cartridge or 1016mm length cartridge. Chemelean® cartridges come in a wide range of media choices for suitable fluid compatibility.
• Stock units are available in 203.2mm diameter at 150# ANSI rating
• 50.8mm FNPT standard connections with option for changing to 50.8mm flange connections
• Carbon steel unit dual rated: 275 psig at 121o C without corrosion allowance and 150 psig at 121°C with 3.175mm corrosion allowance
• Stainless steel unit rated: 150psig at 121o C without corrosion allowance
ADDER OPTIONS AND CARTRIDGES ARE TO BE PURCHASED & SHIPPED SEPARATELY
Cartridge Model CMAvailable in pleated polypropylene, polyester, glass or cellulose and PEACH® polyester or polypropylene.
Contaminant Loading ComparisonLong Life ALternAtive to BAg Housings!
Typical #2 Bag
508mm Pleated Chemelean®
1016mm Pleated Chemelean®
8X Loading
16X LoadingData based on laboratory testing
A NEW ERA IN FILTRATION PERFORMANCE AND INNOVATIONTM
1X Loading
Tired of changing out bag filters so often? Before you buy your next bag filter housing, consider purchasing a Chemelean® filter housing instead!
Chemelean® filters provide excellent contaminant loading so cartridge change-out typically becomes less frequent than a bag...and that keeps your process up and running!
ISO 9001
Buna-N GasketItem# 24907 GSKT BUNA-N
.275 RD x 9.375 OD OD 70 DURO Item# 23477 GSKT BUNA-N
.275 RD x 9.375 OD OD 90 DURO
Model 55C
Saddle for Horizontal Housing SupportItem# 25826 CHEMELEAN HORIZONTAL HOUSING STAND 8 INCH SET
50.8mm 150# Stainless Steel Threaded Inlet and Outlet Flange Connections (for stainless steel housings)Item# 25110 FLG 316L 150 TDRF 2 SET
CLOSURE GASKETS EPDM GasketItem# 25762 GSKT EPDM .275 RD x 9.375 OD 70 DURO
Viton® GasketItem# 25763 GSKT VTON .275 RD x 9.375 OD OD 90 DURO
OG-CHML-SL-01 (PFMW-201609 A4)
©2016 PECOFacet
PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice.
World HeadquartersPECOFacet (US), Inc.P.O. Box 640Mineral Wells, Texas 76068Phone: 940-325-2575Toll Free: 800-877-7326Fax: 940-325-4622
PECOFacet has offices worldwide. Visit www.pecofacet.com/About-Us/Locations to find an office near you.
For inquiries email:[email protected]
Visit our website to find:• Installation & Operating Instructions• Housing Registration Form• Associated cartridge information• Most current literature editions
pecofacet.com
YOUR CONTAMINANT MANAGEMENT PARTNER SM
203.2mm Diameter
ASME Code Section VIII, Div. 1
Carbon Steel Construction
Swing Bolt Closure
Inlet/Outlet 50.8mm FNPT
Drain 25.4mm FNPT
DP Ports 12.7mm FNPT
SSPC-SP6 Sandblast
1 Coat Polyurethane
Carbon Steel Housing Dual Rating • 19 bar at 121o C without
Corrosion Allowance
• 10.3 bar at 121o C with 3.2mm Corrosion Allowance
316L Stainless Steel Housing Rating • 10.3 bar at 121o C without
Corrosion Allowance
CHEMELEAN®
Liquid Housings & CartridgesLooking for an easy to use, versatile filter to blend right into your
existing piping? Chemelean® housings and cartridges offer versatility
to adapt to a wide variety of process liquid applications up to 757 lpm.
Chemelean® cartridges come in a wide range of media choices for
suitable fluid compatibility.
25.4 mm
12.7mm
25.4 mm VENT
25.4 mmDRAIN
CARTRIDGE NOMENCLATURE
CM L 2 050 E
Model Standard Configuration Codes
Cartridge Size Micron Rating Seal Material
Chemelean® Cartridges 2 = 6” (152.4mm) OD x 20” (508mm) L
4 = 6” (152.4mm) OD x 20” (1016mm) L
010 = 1 micron 050 = 5 micron100 = 10 micron200 = 20 micron300 = 30 micron400 = 40 micron700 = 70 micron1000 = 100 micron
See configuration codes for available ratings for each material.
B = Buna-NE = EPDMV = Viton®
See configuration codes for suggested seal material for selected media.
Changes to suggested seal material code could change temperature limit for cartridge.
E – Pleated Polyester Tin Plated Steel Louvered Canbody, Core, End Caps Buna Seal Temp Limit: 116o C Micron Ratings: 5, 10, 20, 40, 70, 100 Efficiency Rating: 99.98%
L – Pleated Polypropylene Tin Plated Steel Louvered Canbody, Core, End Caps EPDM Seal Temp Limit: 82o C Micron Ratings: 5, 10, 20, 40, 70, 100 Efficiency Rating: 99.98%
G1 – Pleated Fiberglass/Acrylic Backing Tin Plated Louvered Canbody, Core, End Caps Viton® Seal Temp Limit: 121o C Micron Ratings: 1, 5, 10, 20, 30 Efficiency Rating: 99.98%
G2 – Pleated Fiberglass/Acrylic Backing Corrosion Resistant Canbody, Core, End Caps Viton® Seal Temp Limit: 121o C Micron Ratings: 1, 5, 10, 20, 30 Efficiency Rating: 99.98%
GHT1* – Pleated Fiberglass/Epoxy Backing Tin Plated Louvered Canbody, Core, End Caps Viton® Seal Temp Limit: 177o C Micron Ratings: 1, 5, 10, 20, 30 Efficiency Rating: 99.98%
GHT2* – Pleated Fiberglass/Epoxy Backing Corrosion Resistant Canbody, Core, End Caps Viton® Seal Temp Limit: 177o C Micron Ratings: 1, 5, 10, 20, 30 Efficiency Rating: 99.98%
PCHL – PEACH® Polypropylene Depth Tin Plated Steel Core, End Caps EPDM Seal Temp Limit: 82o C Micron Ratings: 5, 10, 20, 40, 70 Efficiency Rating: 90%
PCHE – PEACH® Polyester Depth Tin Plated Steel Core, End Caps Buna Seal Temp Limit: 116o C Micron Ratings: 5, 10, 20, 40, 70 Efficiency Rating: 90%
C1 – Pleated Cellulose Tin Plated Louvered Canbody, Core, End Caps Buna Seal Temp Limit: 121o C Micron Ratings: 5, 10, 20, 40 Efficiency Rating: 90%
C2 – Pleated Cellulose Corrosion Resistant Canbody, Core, End Caps Buna Seal Temp Limit: 121o C Micron Ratings: 5, 10, 20, 40 Efficiency Rating: 90%
AVERAGE CONTAMINANT LOADING CAPACITY
Contaminant Loading (kgs) Max. Recommended Differential Pressure (Bar)
508mm Cartridge 3.6 2.4
1016mm Cartridge 7.3 2.4
508mm CARTRIDGE (1 cP)
LPM 1μm 5μm 10μm 20μm 30μm 40μm 70μm 100μm
95 0.028 0.021 0.017 0.01 0.008 0.006 0.003 0.002
190 0.066 0.048 0.034 0.027 0.022 0.018 0.012 0.007
285 0.107 0.083 0.062 0.048 0.042 0.037 0.027 0.017
380 0.155 0.124 0.097 0.078 0.071 0.064 0.047 0.033
1016mm CARTRIDGE (1 cP)
LPM 1μm 5μm 10μm 20μm 30μm 40μm 70μm 100μm
190 0.028 0.021 0.017 0.01 0.008 0.006 0.003 0.002
380 0.066 0.048 0.034 0.027 0.022 0.018 0.012 0.007
570 0.107 0.083 0.062 0.048 0.042 0.037 0.027 0.017
760 0.155 0.124 0.097 0.078 0.071 0.064 0.047 0.033
CARTRIDGE SELECTION GUIDE FOR COMMON APPLICATIONS
Water or Amine Condensate Hot Hydrocarbons Lube Oil Glycol
Pleated Cartridge CM-L-xxxxE CM-G!-xxxxV CM-GHT1-xxxxV CM-C1-xxxxB CM-E-xxxxV
PEACH® Cartridge CM-PCHL-xxxxE CM-PCHE-xxxxV N/A CM-PCHE-xxxxB CM-PCHE-xxxxV
Max. Temp 82o C 121o C (116o C PEACH®) 177o C 121o C (116o C PEACH®) 116o C
pH Range 0-14 3-9 3-11 3-11 3-9
FLOW RATE VS. DIFFERENTIAL PRESSURE (Bar)USING PLEATED CARTRIDGE
Cartridges tested using ISO Test Dust in water. Contaminant loading based on lab testing with pleated cartridges. Results may vary under field conditions.
RECOMMENDED MAXIMUM FLOW For PEACH® depth cartridge multiply flow rate by 0.75
1016mm CARTRIDGE
1 cP 760 lpm
3 cP 680 lpm
7 cP 565 lpm
15 cP 455 lpm
PSID Calculations for Fluids Greater Than 1 cP3 cP = Chart Value times 1.12 • 7 cP = Chart Value times 1.33 • 15 cP = Chart Value times 1.66
ModelCartridge
Length In/Out Number of Cartridges A B C D E F G H I
55C-1-620-8-275-CS-STD
508mm 50.8mm Cplg 1 219.070 676.275 873.125 168.275 231.775 415.925 647.700 1352.550 1050.925
55C-1-640-8-275-CS-STD
1016mm 50.8mm Cplg 1 219.070 1184.275 1381.125 168.275 231.775 415.925 647.700 1860.550 1558.925
OPTIONS
Inlet/Outlet Flange Connections
Clamp Support Legs or Saddle
Closure Gasket Materials
CARTRIDGE SIZE & STYLE
Double Open Ended Cartridges (DOE)
152.4mm Diameter
508mm or 1016mm Length
STANDARD FEATURES
* When using cartridges for temperatures rated above 121o C, housing rating should be re-evaluated by engineering.Note: Dimensions are a general reference only.
xxxx = Cartridge Length & Micron Rating
508mm CARTRIDGE
1 cP 380 lpm
3 cP 340 lpm
7 cP 285 lpm
15 cP 230 lpm
MODEL 55C ECONOMY LIQUID FILTER
FLOW RATES UP TO 760 LPM
pecofacet.comViton is a registered trademark of E.I. du Pont de Nemours and Company.
PECOFacet, Chemelean and PEACH are trademarks of PECOFacet.® indicates a PECOFacet trademark registered in the USA and various other countries.
ADDER OPTIONS
HOUSING NOMENCLATURE
55C
Model
1
# Cartridges
620
Cartridge Size
8
Housing Diameter
inches
275
Design PressurePSIG
CS
Material of Construction
STD
Design
620 = 6” (152.4mm) OD x 20” (508mm) L, DOE
640 = 6” (152.4mm) OD x 40” (1016mm) L, DOE
DOE - double open end style end caps
Chemelean® Housing 275=Carbon Steel
150=316L StainlessCS = Carbon SteelSS = 316L Stainless
STD = StandardCST = Custom
SUPPORTSLegs for Vertical Housing SupportItem# 23433 CHEMELEAN VERTICAL HOUSING STAND 8 INCH
FLANGES 50.8mm 150# Carbon Steel Threaded Inlet and Outlet Flange Connections (for carbon steel housings) Item# 25109 FLG 105 150 TDRF 2 SET
HOUSING MODELS
CARBON STEEL STANDARD HOUSINGS
Item# 23832 FLT 55C- 1-620-8- 275-CS-STD
Item# 23753 FLT 55C- 1-640-8- 275-CS-STDComes standard with the following buna-N closure gasket: Item# 23477 GSKT BUNA-N .275 RD x 9.375 OD 90 DURO
STAINLESS STEEL STANDARD HOUSINGS
Item# 24838 FLT 55C- 1-620-8- 150-SS-STD
Item# 24836 FLT 55C- 1-640-8- 150-SS-STDComes standard with the following buna-N closure gasket: Item# 24907 GSKT BUNA-N leave as .275 RD x 9.375 OD 70 DURO
Economy Liquid FiltersThe PECOFacet Chemelean® series liquid housings and cartridges offer versatility to adapt to a wide variety of process liquid applications up to 760 lpm. The housings come in two sizes to hold either a 508mm length cartridge or 1016mm length cartridge. Chemelean® cartridges come in a wide range of media choices for suitable fluid compatibility.
• Stock units are available in 203.2mm diameter at 150# ANSI rating
• 50.8mm FNPT standard connections with option for changing to 50.8mm flange connections
• Carbon steel unit dual rated: 275 psig at 121o C without corrosion allowance and 150 psig at 121°C with 3.175mm corrosion allowance
• Stainless steel unit rated: 150psig at 121o C without corrosion allowance
ADDER OPTIONS AND CARTRIDGES ARE TO BE PURCHASED & SHIPPED SEPARATELY
Cartridge Model CMAvailable in pleated polypropylene, polyester, glass or cellulose and PEACH® polyester or polypropylene.
Contaminant Loading ComparisonLong Life ALternAtive to BAg Housings!
Typical #2 Bag
508mm Pleated Chemelean®
1016mm Pleated Chemelean®
8X Loading
16X LoadingData based on laboratory testing
A NEW ERA IN FILTRATION PERFORMANCE AND INNOVATIONTM
1X Loading
Tired of changing out bag filters so often? Before you buy your next bag filter housing, consider purchasing a Chemelean® filter housing instead!
Chemelean® filters provide excellent contaminant loading so cartridge change-out typically becomes less frequent than a bag...and that keeps your process up and running!
ISO 9001
Buna-N GasketItem# 24907 GSKT BUNA-N
.275 RD x 9.375 OD OD 70 DURO Item# 23477 GSKT BUNA-N
.275 RD x 9.375 OD OD 90 DURO
Model 55C
Saddle for Horizontal Housing SupportItem# 25826 CHEMELEAN HORIZONTAL HOUSING STAND 8 INCH SET
50.8mm 150# Stainless Steel Threaded Inlet and Outlet Flange Connections (for stainless steel housings)Item# 25110 FLG 316L 150 TDRF 2 SET
CLOSURE GASKETS EPDM GasketItem# 25762 GSKT EPDM .275 RD x 9.375 OD 70 DURO
Viton® GasketItem# 25763 GSKT VTON .275 RD x 9.375 OD OD 90 DURO
OG-CHML-SL-01 (PFMW-201609 A4)
©2016 PECOFacet
PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice.
World HeadquartersPECOFacet (US), Inc.P.O. Box 640Mineral Wells, Texas 76068Phone: 940-325-2575Toll Free: 800-877-7326Fax: 940-325-4622
PECOFacet has offices worldwide. Visit www.pecofacet.com/About-Us/Locations to find an office near you.
For inquiries email:[email protected]
Visit our website to find:• Installation & Operating Instructions• Housing Registration Form• Associated cartridge information• Most current literature editions
pecofacet.com
YOUR CONTAMINANT MANAGEMENT PARTNER SM
203.2mm Diameter
ASME Code Section VIII, Div. 1
Carbon Steel Construction
Swing Bolt Closure
Inlet/Outlet 50.8mm FNPT
Drain 25.4mm FNPT
DP Ports 12.7mm FNPT
SSPC-SP6 Sandblast
1 Coat Polyurethane
Carbon Steel Housing Dual Rating • 19 bar at 121o C without
Corrosion Allowance
• 10.3 bar at 121o C with 3.2mm Corrosion Allowance
316L Stainless Steel Housing Rating • 10.3 bar at 121o C without
Corrosion Allowance
CHEMELEAN®
Liquid Housings & CartridgesLooking for an easy to use, versatile filter to blend right into your
existing piping? Chemelean® housings and cartridges offer versatility
to adapt to a wide variety of process liquid applications up to 757 lpm.
Chemelean® cartridges come in a wide range of media choices for
suitable fluid compatibility.
25.4 mm
12.7mm
25.4 mm VENT
25.4 mmDRAIN
CARTRIDGE NOMENCLATURE
CM L 2 050 E
Model Standard Configuration Codes
Cartridge Size Micron Rating Seal Material
Chemelean® Cartridges 2 = 6” (152.4mm) OD x 20” (508mm) L
4 = 6” (152.4mm) OD x 20” (1016mm) L
010 = 1 micron 050 = 5 micron100 = 10 micron200 = 20 micron300 = 30 micron400 = 40 micron700 = 70 micron1000 = 100 micron
See configuration codes for available ratings for each material.
B = Buna-NE = EPDMV = Viton®
See configuration codes for suggested seal material for selected media.
Changes to suggested seal material code could change temperature limit for cartridge.
E – Pleated Polyester Tin Plated Steel Louvered Canbody, Core, End Caps Buna Seal Temp Limit: 116o C Micron Ratings: 5, 10, 20, 40, 70, 100 Efficiency Rating: 99.98%
L – Pleated Polypropylene Tin Plated Steel Louvered Canbody, Core, End Caps EPDM Seal Temp Limit: 82o C Micron Ratings: 5, 10, 20, 40, 70, 100 Efficiency Rating: 99.98%
G1 – Pleated Fiberglass/Acrylic Backing Tin Plated Louvered Canbody, Core, End Caps Viton® Seal Temp Limit: 121o C Micron Ratings: 1, 5, 10, 20, 30 Efficiency Rating: 99.98%
G2 – Pleated Fiberglass/Acrylic Backing Corrosion Resistant Canbody, Core, End Caps Viton® Seal Temp Limit: 121o C Micron Ratings: 1, 5, 10, 20, 30 Efficiency Rating: 99.98%
GHT1* – Pleated Fiberglass/Epoxy Backing Tin Plated Louvered Canbody, Core, End Caps Viton® Seal Temp Limit: 177o C Micron Ratings: 1, 5, 10, 20, 30 Efficiency Rating: 99.98%
GHT2* – Pleated Fiberglass/Epoxy Backing Corrosion Resistant Canbody, Core, End Caps Viton® Seal Temp Limit: 177o C Micron Ratings: 1, 5, 10, 20, 30 Efficiency Rating: 99.98%
PCHL – PEACH® Polypropylene Depth Tin Plated Steel Core, End Caps EPDM Seal Temp Limit: 82o C Micron Ratings: 5, 10, 20, 40, 70 Efficiency Rating: 90%
PCHE – PEACH® Polyester Depth Tin Plated Steel Core, End Caps Buna Seal Temp Limit: 116o C Micron Ratings: 5, 10, 20, 40, 70 Efficiency Rating: 90%
C1 – Pleated Cellulose Tin Plated Louvered Canbody, Core, End Caps Buna Seal Temp Limit: 121o C Micron Ratings: 5, 10, 20, 40 Efficiency Rating: 90%
C2 – Pleated Cellulose Corrosion Resistant Canbody, Core, End Caps Buna Seal Temp Limit: 121o C Micron Ratings: 5, 10, 20, 40 Efficiency Rating: 90%
AVERAGE CONTAMINANT LOADING CAPACITY
Contaminant Loading (kgs) Max. Recommended Differential Pressure (Bar)
508mm Cartridge 3.6 2.4
1016mm Cartridge 7.3 2.4
508mm CARTRIDGE (1 cP)
LPM 1μm 5μm 10μm 20μm 30μm 40μm 70μm 100μm
95 0.028 0.021 0.017 0.01 0.008 0.006 0.003 0.002
190 0.066 0.048 0.034 0.027 0.022 0.018 0.012 0.007
285 0.107 0.083 0.062 0.048 0.042 0.037 0.027 0.017
380 0.155 0.124 0.097 0.078 0.071 0.064 0.047 0.033
1016mm CARTRIDGE (1 cP)
LPM 1μm 5μm 10μm 20μm 30μm 40μm 70μm 100μm
190 0.028 0.021 0.017 0.01 0.008 0.006 0.003 0.002
380 0.066 0.048 0.034 0.027 0.022 0.018 0.012 0.007
570 0.107 0.083 0.062 0.048 0.042 0.037 0.027 0.017
760 0.155 0.124 0.097 0.078 0.071 0.064 0.047 0.033
CARTRIDGE SELECTION GUIDE FOR COMMON APPLICATIONS
Water or Amine Condensate Hot Hydrocarbons Lube Oil Glycol
Pleated Cartridge CM-L-xxxxE CM-G!-xxxxV CM-GHT1-xxxxV CM-C1-xxxxB CM-E-xxxxV
PEACH® Cartridge CM-PCHL-xxxxE CM-PCHE-xxxxV N/A CM-PCHE-xxxxB CM-PCHE-xxxxV
Max. Temp 82o C 121o C (116o C PEACH®) 177o C 121o C (116o C PEACH®) 116o C
pH Range 0-14 3-9 3-11 3-11 3-9
FLOW RATE VS. DIFFERENTIAL PRESSURE (Bar)USING PLEATED CARTRIDGE
Cartridges tested using ISO Test Dust in water. Contaminant loading based on lab testing with pleated cartridges. Results may vary under field conditions.
RECOMMENDED MAXIMUM FLOW For PEACH® depth cartridge multiply flow rate by 0.75
1016mm CARTRIDGE
1 cP 760 lpm
3 cP 680 lpm
7 cP 565 lpm
15 cP 455 lpm
PSID Calculations for Fluids Greater Than 1 cP3 cP = Chart Value times 1.12 • 7 cP = Chart Value times 1.33 • 15 cP = Chart Value times 1.66
ModelCartridge
Length In/Out Number of Cartridges A B C D E F G H I
55C-1-620-8-275-CS-STD
508mm 50.8mm Cplg 1 219.070 676.275 873.125 168.275 231.775 415.925 647.700 1352.550 1050.925
55C-1-640-8-275-CS-STD
1016mm 50.8mm Cplg 1 219.070 1184.275 1381.125 168.275 231.775 415.925 647.700 1860.550 1558.925
OPTIONS
Inlet/Outlet Flange Connections
Clamp Support Legs or Saddle
Closure Gasket Materials
CARTRIDGE SIZE & STYLE
Double Open Ended Cartridges (DOE)
152.4mm Diameter
508mm or 1016mm Length
STANDARD FEATURES
* When using cartridges for temperatures rated above 121o C, housing rating should be re-evaluated by engineering.Note: Dimensions are a general reference only.
xxxx = Cartridge Length & Micron Rating
508mm CARTRIDGE
1 cP 380 lpm
3 cP 340 lpm
7 cP 285 lpm
15 cP 230 lpm
203.2mm Diameter
ASME Code Section VIII, Div. 1
Carbon Steel Construction
Swing Bolt Closure
Inlet/Outlet 50.8mm FNPT
Drain 25.4mm FNPT
DP Ports 12.7mm FNPT
SSPC-SP6 Sandblast
1 Coat Polyurethane
Carbon Steel Housing Dual Rating • 19 bar at 121o C without
Corrosion Allowance
• 10.3 bar at 121o C with 3.2mm Corrosion Allowance
316L Stainless Steel Housing Rating • 10.3 bar at 121o C without
Corrosion Allowance
CHEMELEAN®
Liquid Housings & CartridgesLooking for an easy to use, versatile filter to blend right into your
existing piping? Chemelean® housings and cartridges offer versatility
to adapt to a wide variety of process liquid applications up to 757 lpm.
Chemelean® cartridges come in a wide range of media choices for
suitable fluid compatibility.
25.4 mm
12.7mm
25.4 mm VENT
25.4 mmDRAIN
CARTRIDGE NOMENCLATURE
CM L 2 050 E
Model Standard Configuration Codes
Cartridge Size Micron Rating Seal Material
Chemelean® Cartridges 2 = 6” (152.4mm) OD x 20” (508mm) L
4 = 6” (152.4mm) OD x 20” (1016mm) L
010 = 1 micron 050 = 5 micron100 = 10 micron200 = 20 micron300 = 30 micron400 = 40 micron700 = 70 micron1000 = 100 micron
See configuration codes for available ratings for each material.
B = Buna-NE = EPDMV = Viton®
See configuration codes for suggested seal material for selected media.
Changes to suggested seal material code could change temperature limit for cartridge.
E – Pleated Polyester Tin Plated Steel Louvered Canbody, Core, End Caps Buna Seal Temp Limit: 116o C Micron Ratings: 5, 10, 20, 40, 70, 100 Efficiency Rating: 99.98%
L – Pleated Polypropylene Tin Plated Steel Louvered Canbody, Core, End Caps EPDM Seal Temp Limit: 82o C Micron Ratings: 5, 10, 20, 40, 70, 100 Efficiency Rating: 99.98%
G1 – Pleated Fiberglass/Acrylic Backing Tin Plated Louvered Canbody, Core, End Caps Viton® Seal Temp Limit: 121o C Micron Ratings: 1, 5, 10, 20, 30 Efficiency Rating: 99.98%
G2 – Pleated Fiberglass/Acrylic Backing Corrosion Resistant Canbody, Core, End Caps Viton® Seal Temp Limit: 121o C Micron Ratings: 1, 5, 10, 20, 30 Efficiency Rating: 99.98%
GHT1* – Pleated Fiberglass/Epoxy Backing Tin Plated Louvered Canbody, Core, End Caps Viton® Seal Temp Limit: 177o C Micron Ratings: 1, 5, 10, 20, 30 Efficiency Rating: 99.98%
GHT2* – Pleated Fiberglass/Epoxy Backing Corrosion Resistant Canbody, Core, End Caps Viton® Seal Temp Limit: 177o C Micron Ratings: 1, 5, 10, 20, 30 Efficiency Rating: 99.98%
PCHL – PEACH® Polypropylene Depth Tin Plated Steel Core, End Caps EPDM Seal Temp Limit: 82o C Micron Ratings: 5, 10, 20, 40, 70 Efficiency Rating: 90%
PCHE – PEACH® Polyester Depth Tin Plated Steel Core, End Caps Buna Seal Temp Limit: 116o C Micron Ratings: 5, 10, 20, 40, 70 Efficiency Rating: 90%
C1 – Pleated Cellulose Tin Plated Louvered Canbody, Core, End Caps Buna Seal Temp Limit: 121o C Micron Ratings: 5, 10, 20, 40 Efficiency Rating: 90%
C2 – Pleated Cellulose Corrosion Resistant Canbody, Core, End Caps Buna Seal Temp Limit: 121o C Micron Ratings: 5, 10, 20, 40 Efficiency Rating: 90%
AVERAGE CONTAMINANT LOADING CAPACITY
Contaminant Loading (kgs) Max. Recommended Differential Pressure (Bar)
508mm Cartridge 3.6 2.4
1016mm Cartridge 7.3 2.4
508mm CARTRIDGE (1 cP)
LPM 1μm 5μm 10μm 20μm 30μm 40μm 70μm 100μm
95 0.028 0.021 0.017 0.01 0.008 0.006 0.003 0.002
190 0.066 0.048 0.034 0.027 0.022 0.018 0.012 0.007
285 0.107 0.083 0.062 0.048 0.042 0.037 0.027 0.017
380 0.155 0.124 0.097 0.078 0.071 0.064 0.047 0.033
1016mm CARTRIDGE (1 cP)
LPM 1μm 5μm 10μm 20μm 30μm 40μm 70μm 100μm
190 0.028 0.021 0.017 0.01 0.008 0.006 0.003 0.002
380 0.066 0.048 0.034 0.027 0.022 0.018 0.012 0.007
570 0.107 0.083 0.062 0.048 0.042 0.037 0.027 0.017
760 0.155 0.124 0.097 0.078 0.071 0.064 0.047 0.033
CARTRIDGE SELECTION GUIDE FOR COMMON APPLICATIONS
Water or Amine Condensate Hot Hydrocarbons Lube Oil Glycol
Pleated Cartridge CM-L-xxxxE CM-G!-xxxxV CM-GHT1-xxxxV CM-C1-xxxxB CM-E-xxxxV
PEACH® Cartridge CM-PCHL-xxxxE CM-PCHE-xxxxV N/A CM-PCHE-xxxxB CM-PCHE-xxxxV
Max. Temp 82o C 121o C (116o C PEACH®) 177o C 121o C (116o C PEACH®) 116o C
pH Range 0-14 3-9 3-11 3-11 3-9
FLOW RATE VS. DIFFERENTIAL PRESSURE (Bar)USING PLEATED CARTRIDGE
Cartridges tested using ISO Test Dust in water. Contaminant loading based on lab testing with pleated cartridges. Results may vary under field conditions.
RECOMMENDED MAXIMUM FLOW For PEACH® depth cartridge multiply flow rate by 0.75
1016mm CARTRIDGE
1 cP 760 lpm
3 cP 680 lpm
7 cP 565 lpm
15 cP 455 lpm
PSID Calculations for Fluids Greater Than 1 cP3 cP = Chart Value times 1.12 • 7 cP = Chart Value times 1.33 • 15 cP = Chart Value times 1.66
ModelCartridge
Length In/Out Number of Cartridges A B C D E F G H I
55C-1-620-8-275-CS-STD
508mm 50.8mm Cplg 1 219.070 676.275 873.125 168.275 231.775 415.925 647.700 1352.550 1050.925
55C-1-640-8-275-CS-STD
1016mm 50.8mm Cplg 1 219.070 1184.275 1381.125 168.275 231.775 415.925 647.700 1860.550 1558.925
OPTIONS
Inlet/Outlet Flange Connections
Clamp Support Legs or Saddle
Closure Gasket Materials
CARTRIDGE SIZE & STYLE
Double Open Ended Cartridges (DOE)
152.4mm Diameter
508mm or 1016mm Length
STANDARD FEATURES
* When using cartridges for temperatures rated above 121o C, housing rating should be re-evaluated by engineering.Note: Dimensions are a general reference only.
xxxx = Cartridge Length & Micron Rating
508mm CARTRIDGE
1 cP 380 lpm
3 cP 340 lpm
7 cP 285 lpm
15 cP 230 lpm
MODEL 55C ECONOMY LIQUID FILTER
FLOW RATES UP TO 760 LPM
pecofacet.comViton is a registered trademark of E.I. du Pont de Nemours and Company.
PECOFacet, Chemelean and PEACH are trademarks of PECOFacet.® indicates a PECOFacet trademark registered in the USA and various other countries.
ADDER OPTIONS
HOUSING NOMENCLATURE
55C
Model
1
# Cartridges
620
Cartridge Size
8
Housing Diameter
inches
275
Design PressurePSIG
CS
Material of Construction
STD
Design
620 = 6” (152.4mm) OD x 20” (508mm) L, DOE
640 = 6” (152.4mm) OD x 40” (1016mm) L, DOE
DOE - double open end style end caps
Chemelean® Housing 275=Carbon Steel
150=316L StainlessCS = Carbon SteelSS = 316L Stainless
STD = StandardCST = Custom
SUPPORTSLegs for Vertical Housing SupportItem# 23433 CHEMELEAN VERTICAL HOUSING STAND 8 INCH
FLANGES 50.8mm 150# Carbon Steel Threaded Inlet and Outlet Flange Connections (for carbon steel housings) Item# 25109 FLG 105 150 TDRF 2 SET
HOUSING MODELS
CARBON STEEL STANDARD HOUSINGS
Item# 23832 FLT 55C- 1-620-8- 275-CS-STD
Item# 23753 FLT 55C- 1-640-8- 275-CS-STDComes standard with the following buna-N closure gasket: Item# 23477 GSKT BUNA-N .275 RD x 9.375 OD 90 DURO
STAINLESS STEEL STANDARD HOUSINGS
Item# 24838 FLT 55C- 1-620-8- 150-SS-STD
Item# 24836 FLT 55C- 1-640-8- 150-SS-STDComes standard with the following buna-N closure gasket: Item# 24907 GSKT BUNA-N leave as .275 RD x 9.375 OD 70 DURO
Economy Liquid FiltersThe PECOFacet Chemelean® series liquid housings and cartridges offer versatility to adapt to a wide variety of process liquid applications up to 760 lpm. The housings come in two sizes to hold either a 508mm length cartridge or 1016mm length cartridge. Chemelean® cartridges come in a wide range of media choices for suitable fluid compatibility.
• Stock units are available in 203.2mm diameter at 150# ANSI rating
• 50.8mm FNPT standard connections with option for changing to 50.8mm flange connections
• Carbon steel unit dual rated: 275 psig at 121o C without corrosion allowance and 150 psig at 121°C with 3.175mm corrosion allowance
• Stainless steel unit rated: 150psig at 121o C without corrosion allowance
ADDER OPTIONS AND CARTRIDGES ARE TO BE PURCHASED & SHIPPED SEPARATELY
Cartridge Model CMAvailable in pleated polypropylene, polyester, glass or cellulose and PEACH® polyester or polypropylene.
Contaminant Loading ComparisonLong Life ALternAtive to BAg Housings!
Typical #2 Bag
508mm Pleated Chemelean®
1016mm Pleated Chemelean®
8X Loading
16X LoadingData based on laboratory testing
A NEW ERA IN FILTRATION PERFORMANCE AND INNOVATIONTM
1X Loading
Tired of changing out bag filters so often? Before you buy your next bag filter housing, consider purchasing a Chemelean® filter housing instead!
Chemelean® filters provide excellent contaminant loading so cartridge change-out typically becomes less frequent than a bag...and that keeps your process up and running!
ISO 9001
Buna-N GasketItem# 24907 GSKT BUNA-N
.275 RD x 9.375 OD OD 70 DURO Item# 23477 GSKT BUNA-N
.275 RD x 9.375 OD OD 90 DURO
Model 55C
Saddle for Horizontal Housing SupportItem# 25826 CHEMELEAN HORIZONTAL HOUSING STAND 8 INCH SET
50.8mm 150# Stainless Steel Threaded Inlet and Outlet Flange Connections (for stainless steel housings)Item# 25110 FLG 316L 150 TDRF 2 SET
CLOSURE GASKETS EPDM GasketItem# 25762 GSKT EPDM .275 RD x 9.375 OD 70 DURO
Viton® GasketItem# 25763 GSKT VTON .275 RD x 9.375 OD OD 90 DURO
OG-CHML-SL-01 (PFMW-201609 A4)
©2016 PECOFacet
PECOFacet has a policy of continuous product research and development and reserves the right to change design and specifications without notice.
World HeadquartersPECOFacet (US), Inc.P.O. Box 640Mineral Wells, Texas 76068Phone: 940-325-2575Toll Free: 800-877-7326Fax: 940-325-4622
PECOFacet has offices worldwide. Visit www.pecofacet.com/About-Us/Locations to find an office near you.
For inquiries email:[email protected]
Visit our website to find:• Installation & Operating Instructions• Housing Registration Form• Associated cartridge information• Most current literature editions
pecofacet.com
YOUR CONTAMINANT MANAGEMENT PARTNER SM
