Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Products & Services 2020
Your 5 StarPlumbers13000-5-STAR
1
About Us Contents
» Points of Difference
» Schedule of Rates
» Hot Water Systems
» Tapware
» Bathrooms
» Kitchens
» Drainage
» General Maintenance
» Leak Detection
» Gas
» Renovations
» New Homes
» Commercial Kitchen Fitouts
» Grease Traps
» Our Awards
All pricing quoted EXCLUDES GST
Plumbing Bros. began when three best mates - Joe, Jos and James - came together at a previous place of business and realised by combining their passion for teamwork, customer service and business operations they could become the best domestic plumbing maintenance company in Perth, and perhaps even the biggest.
Plumbing Bros. was born, and in just over two years, we have grown from three eager young men to more than 20 hardworking, passionate and reliable team members. Proof is in the pudding for us and based on the amount of 5-star Google reviews, Facebook and other review-based portals, we are living up to our mantra.
We think of ourselves as disruptors in the trades and services industry. In an category filled with specific trade-based workmanship ability, we identified a lack of business nous. Seeing this gap, we created a system-based, process driven business. Now with the success of our business model in WA, founder James Riddle has set about expanding Plumbing Bros. Australia wide.
OUR MISSION IS TO CHANGE THE PERCEPTION OF PLUMBING
WE AIM TO DO ITBY ALWAYS PROVIDINGNOTHING LESS THAN5 STAR SERVICE
All products subject to state and territory pricing at time of purchase
32
FAST, FRIENDLY & COST EFFECTIVE PLUMBING SOLUTIONS IN AUSTRALIA.We are highly experienced in the field of plumbing and our friendly staff go above & beyond on every single job to make sure we get the utmost satisfaction from our clients.
• Commercial, Domestic & Renovations
• Plumbing & Gas Fault Finding & Repair
• Systemised Operation
• National Capabilities
We offer services in maintenance and installation of new or existing domestic and commercial premises.
We have the processes in place to ensure our clients have a stress free and positive experience. Once the job request is passed on to us you can be confident it is being taken care of in the highest possible regard. We are also fully insured against any possible interferences.
No matter how big or small the task we are assigned, it is handled as professionally as humanly possible.
We have an extreme respect for health & safety, our software and management systems are the latest technology, and our nationwide service capabilities are second to none.
Company Profile
Fully equipped with all new home needs, including excavator
30+ years of new home experience including all building/council laws
We are partnered with over 5 + building companies
Our new home pricing is un-beatable
We will beat any quote by 10%
Next day service, should we need to commence work on a major site
Large and very cohesive team able to work on large projects
Communication skills which are second to none in our industry
We will always keep up to date with time scheduling and completion dates
Due to our relationship with suppliers we are able to give THE best price on supplies to our clients
Free quotes
6 months interest free payment plan options
Plumbing Bros covers all of Perth from Two Rocks in the north to Falcon in the south
Points of Difference
“Great same day service, professional, great price and customer service. Would
definitely recommend to all.” Scott L.
“Plumbing Bros best plumbing company I have ever used! They were absolutely fantastic! I thoroughly recommend them first class in every way!” Sandy McEwan.
“We have been using the service of Plumbing Bros for over 12 months now
across our portfolio of over 2,000 properties. Since the first job they
have done for us, Plumbing Bros have consistently maintained the highest level of service and efficiency of any plumbing & gas contractor we have used to date.”
D Campbell, Xceed Real Estate.
“Fantastic customer service. Efficient, friendly and easy to deal with. Their
response times are second to none. Our clients have all been extremely satisfied
with the standard of work, response times and competitive price.” Harcourts
All works are covered by a 3-month cooling off workmanship warranty. After 3-months, re-attends will be deemed non-workmanship faults unless proven otherwise, in which case you will receive our LIFETIME installation warranty. All product warranties are provided as per the manufacturers specification which we can supply on request.
WE ARE ALL ABOUT 5 STAR SERVICEWe always strive to deliver the best and most consistent service to all our customers. From the way we answer the phone and how we present ourselves to the follow-up and systems behind our service.
Here’s our 5 points of difference:
OUR UNIQUE POINTS OF DIFFERENCE THAT MAKES ALL THE DIFFERENCE
LIFETIME WARRANTYWe stand behind every
job. If there is a problem with our workmanship, we
will make good. For the lifetime of the job. Plus all standard manufacturers
warranties apply.
7 DAY RATESWe like to keep things simple. Our standard
hourly rate applies every day – between 8am and 5pm. Outside of those
hours the rate is 1.5x. For any emergency service,
the rate is 2x.
ON-TIME PROMISEReliability is paramount.
We will arrive at your door within a two hour appointment window,
ready to go. If we are late, you receive a $25 voucher
for every 25 minutes.
TRIPLE CHECKTo ensure the quality of all our work, we make
sure every job is checked THREE TIMES! By more
than one person, if possible and in front
of the client, if possible.
24/7 EMERGENCY SERVICE
Plumbing Bros. are always on call for emergency
service or advice. In fact, in a plumbing emergency we aim to be there within
two hours of your call.
“At Plumbing Bros, we aim to change the perception of plumbing. We consider ourselves disruptors of our industry”
5
Supply and Install Natural Gas Hot Water Systems
Product Sell Price: $1,200+
THERMANN 135L
4
DescriptionThermann 4* Hot Water Unit 135 ltr Natural Gas
Product InformationGas Type: Natural Gas Website: www.thermann.com.au
Technical InformationGas Consumption: 29.5 MJ/h Hot Water Delivery (First Hour): 265 ltr Relief Valve Setting: 1400 kPa Star Rating: 4 star
Size and DimensionsHeight: 1600 mm | Width: 422 mm Depth: 502 mm | Capacity: 135 ltr Tank Weight (Dry): 72 kg
WarrantyCylinder Warranty: 7 Years Spare Parts and Labour: 1 Year
Inclusions• Provide Plumbing Certification
• Supply of new hot and cold relief valves
• Removal of old unit and box from site
• Includes original fault finding visit up to 30 mins only (same visit)
• LIFETIME WARRANTY on workmanship
• To commission and submit compliance paperwork to local authority
• Supply and install hot water lagging
Additional Extras• Supply and install of 1 x new gravel pit – add an extra $50+ per pit
• If a tempering valve is required (changing from existing tempering valve only) add an extra $100+
• If there is no gas valve present an extra $30+ will be added to supply and cut in a 15mm Dura Eagle gas cock
• If the unit is not 10mm above finished floor height and a slab is required, add an extra $30+
• Additional visits will incur an additional fee
• If the client wishes to change from storage to instantaneous a quotation will be provided
• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues) OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
Hot Water Systems
HOT WATER SYSTEMS
*will price match any written quote*
7
HOT WATER SYSTEMS
Product Sell Price: $1,200+
Inclusions• Provide Plumbing Certification
• Manometer test houses gas line NOTE: If a gas leak is present, entire job will be charged at time & materials
• Supply of new hot and cold relief valves
• Removal of old unit and box from site
• Includes original fault finding visit up to 30 mins only (same visit)
• LIFETIME WARRANTY on workmanship
• To commission and submit compliance paperwork to local authority
• Supply and install hot water lagging
Additional Extras• Supply and install of 1 x new gravel pit – add an extra $50+ per pit• If a tempering valve is required (changing from existing temp valve only) add an extra $100+gst
• If pipe works alteration are require a MINIMUM of $50+ should be added to cover costs
• If there is no gas valve present an extra $30+ will be added to supply and cut in a 15mm Dura Eagle gas cock
• If the unit is not 10mm above finished floor height and a slab is required, add an extra $30+
• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues) OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
• If the client wishes to change from storage to instantaneous a quotation will be provided
Size and DimensionsHeight: 1558 mm | Width: 422 mm | Depth: 502 mm | Capacity: 135 ltr | Tank Weight (Dry): 59 kg
WarrantyCylinder Warranty: 7 Years Spare Parts and Labour: 1 Years
DescriptionVulcan Hot Water Unit 135ltr Natural Gas
Product InformationGas Type: Natural Gas Website: www.vulcan.com.au
Technical InformationGas Consumption: 27 MJ/h Hot Water Delivery (First Hour): 248 ltr Relief Valve Setting: 1400 kPa Star Rating: 4 star
VULCAN 135L
Supply and Install Natural Gas Hot Water Systems
6
HOT WATER SYSTEMS
Product Sell Price: $1,450+
DescriptionThermann 4* Hot Water Unit 170 ltr Natural Gas
Product InformationGas Type: Natural Gas Website: www.thermann.com.au
Technical InformationGas Consumption: 33.5 MJ/h Hot Water Delivery (First Hour): 316 ltr Relief Valve Setting: 1400 kPa Star Rating: 4 star
Size and DimensionsHeight: 1900 mm | Width: 422 mm Depth: 502 mm | Capacity: 170 ltr Tank Weight (Dry): 86 kg
WarrantyCylinder Warranty: 7 Years Spare Parts and Labour: 12 Months
Inclusions• Provide Plumbing Certification
• Supply of new hot and cold relief valves
• Removal of old unit and box from site
• Includes original fault finding visit up to 30 mins only (same visit)
• LIFETIME WARRANTY on workmanship
• Leave the user manual with the client/tenant
• To commission and submit compliance paperwork to local authority
• Supply and install hot water lagging
Additional Extras• Supply and install of 1 x new gravel pit – add an extra $50+ per pit
• If a tempering valve is required (changing from existing temp valve only) add an extra $100+
• If there is no gas valve present an extra $30+ will be added to supply and cut in a 15mm Dura Eagle gas cock
• If the unit is not 10mm above finished floor height and a slab is required, add an extra $30+
• Additional visits will incur an additional fee
• If the client wishes to change from storage to instantaneous a quotation will be provided
• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues) OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
THERMANN 170L
Supply and Install Natural Gas Hot Water Systems
*will price match any written quote**will price match any written quote*
9
HOT WATER SYSTEMS
8
HOT WATER SYSTEMS
Product Sell Price: $1,500+
Inclusions• Provide Plumbing Certification• Supply of new hot and cold relief valves • Removal of old unit and box from site• Includes original fault finding visit up to 30 mins only (same visit)• LIFETIME WARRANTY on workmanship• Leave the user manual with the client/tenant • To commission and submit compliance paperwork to local authority • Supply and install hot water lagging
Additional Extras• Supply and install of 1 x new gravel pit – add an extra $50+ per pit• If a tempering valve is required (changing from existing temp valve only) add an extra $100+gst• If pipe works alteration are require a MINIMUM of $50+ should be added to cover costs • If there is no gas valve present an extra $30+ will be added to supply and cut in a 15mm Dura Eagle gas cock • If the unit is not 10mm above finished floor height and a slab is required, add an extra $30+• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues)
OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
• If the client wishes to change from storage to instantaneous a quotation will be provided• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues)
OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
• If the client wishes to change from storage to instantaneous a quotation will be provided
Size and DimensionsHeight: 1858 mm | Width: 422 mm | Depth: 502 mm | Capacity: 170 ltr | Tank Weight (Dry): 69 kg
WarrantyCylinder Warranty: 7 Years Spare Parts and Labour: 12 Months
DescriptionVulcan 4* Hot Water Unit 170ltr Natural Gas
Product InformationGas Type: Natural Gas Website: www.vulcan.com.au
Technical InformationGas Consumption: 27 MJ/h Hot Water Delivery (First Hour): 248 ltr Relief Valve Setting: 1400 kPa Star Rating: 4 star
VULCAN 170L
Supply and Install Natural Gas Hot Water Systems
PLEASE SEE BELOW THE STANDARD SERVICING REQUIREMENTS FOR OPTIMAL PERFORMANCEPlumber Required Sacrificial anode – Replace every 4-5 years
PTR (hot relief) valve — Replace every 5 years
Cold relief valve – Replace every 5 years
Tempering valve – Replace every 5 years
Home Owner / ResidentPTR (hot relief) valve – Manually release every 3-6 months
Cold relief valve – Manually release every 3-6 months
Visually inspect – It is highly recommended that a visual inspection takes place monthly.
This is to inspect/smell for any potential costly water/gas leaks.
*** Please note that in Western Australia it is highly recommended that a plumber inspect all components every second year due to extremely poor water quality
Gas Storage Hot Water System Service — $450+• Ensure the unit is between 4 and 7 years old
or due for 5-yearly service
• Remove burner and pilot assembly and clean debris and injectors
• Supply and install 1 x replacement anode
• Supply and install 15mm cold relief valve
• Supply and install 15mm hot relief valve
NOTE: To only supply and install cold relief = $140+, hot relief = $160+, BOTH hot and cold relief valves = $240+
Additional Extras• If either valve is 20mm OR a PTR extension,
then an extra $25+ per valve will be added
• If a standard tempering valve is present and requires changing an extra $100+ will be added
• If there is no gas valve present an extra $30+ will be added to supply and cut in a 15mm Dura Eagle gas cock
• If there are issues with the burner, pilot assembly or thermostat (gas control valve) then this price will include a basic inspection and remedy up to 10 minutes only
Gas Storage Hot Water System Service Information
“The average lifespan of a storage tank is 10 years.
Performing a service every 4-7 years will ensure your tank can last
for 30+ years”
*will price match any written quote*
10
HOT WATER SYSTEMS
11
HOT WATER SYSTEMS
Product Sell Price: $1,750+
Inclusions• Provide Plumbing Certification
• Supply of new hot and cold relief valves
• Removal of old unit and box from site
• Includes original fault finding visit up to 30 mins only (same visit)
• LIFETIME WARRANTY on workmanship
• Leave the user manual with the client/tenant
• To commission and submit compliance paperwork to local authority
• Supply and install hot water lagging
Additional Extras• Supply and install of 1 x new gravel pit – add an extra $50+ per pit
• If a tempering valve is required (changing from existing temp valve only) add an extra $100+
• If there is no gas valve present an extra $30+ will be added to supply and cut in a 15mm Dura Eagle gas cock
• If the unit is not 10mm above finished floor height and a slab is required, add an extra $30+
• Additional visits will incur an additional fee
• If the client wishes to change from storage to instantaneous a quotation will be provided
• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues) OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
DescriptionRheem Stellar Natural Gas 360 ltr External Hot Water Unit
Product InformationGas Type: Natural Gas Installation: External Suitable for: 3-7 people Variations: Also available in other sizes and gas types
Technical InformationHot Water Delivery (First Hour): 360 ltr
Relief Valve Setting: 1400 kPa Information: Recovery rating: 200 litre per hour at 45deg rise
Size and DimensionsHeight: 1900 mm | Width: 485 mm Depth: 558 mm | Cylinder Size: 160 ltrs Inlet Size: 20 mm | Outlet Size: 20 mm Other Information: Gas connection: 15mm (1/2”) compression
WarrantyProduct Warranty: 10 Years
Supply and Install Natural Gas Hot Water Systems
RHEEM STELLAR 160L
Product Sell Price: $1,650+
Inclusions• Provide Plumbing Certification
• Supply of new hot and cold relief valves
• Removal of old unit and box from site
• Includes original fault finding visit up to 30 mins only (same visit)
• LIFETIME WARRANTY on workmanship
• Leave the user manual with the client/tenant
• To commission and submit compliance paperwork to local authority
• Supply and install hot water lagging
Additional Extras• Supply and install of 1 x new gravel pit – add an extra $50+ per pit
• If a tempering valve is required (changing from existing temp valve only) add an extra $100+
• If there is no gas valve present an extra $30+ will be added to supply and cut in a 15mm Dura Eagle gas cock
• If the unit is not 10mm above finished floor height and a slab is required, add an extra $30+
• Additional visits will incur an additional fee
• If the client wishes to change from storage to instantaneous a quotation will be provided
• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues) OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
DescriptionRheem Stellar Natural Gas 130 ltr External Hot Water Unit
Product InformationGas Type: Natural Gas Installation: External Suitable for: 2-6 people Variations: Also available in other sizes and gas types
Technical InformationHot Water Delivery (First Hour): 330 ltr
Relief Valve Setting: 1400 kPa Star Rating: 5.2 star Information: Recovery rating: 200 litre per hour at 45deg rise
Size and DimensionsHeight: 1600 mm | Width: 485 mm Depth: 558 mm | Cylinder Size: 130 ltrs Inlet Size: 20 mm | Outlet Size: 20 mm Other Information: Gas connection: 15mm (1/2”) compression
WarrantyProduct Warranty: 10 Years
RHEEM STELLAR 130L
Supply and Install Natural Gas Hot Water Systems
*will price match any written quote**will price match any written quote*
13
HOT WATER SYSTEMS
12
HOT WATER SYSTEMS
STANDARD SERVICING REQUIREMENTS FOR OPTIMAL PERFORMANCEPlumber Required STAINLESS STEEL TANK: PTR (hot relief) valve — Replace every 5 years Cold relief valve – Replace every 5 years Tempering valve – Replace every 5 years
Home Owner / ResidentPTR (hot relief) valve – Manually release every 3-6 months Cold relief valve – Manually release every 3-6 months Visually inspect – It is highly recommended that a visual inspection takes place monthly. This is to inspect/smell for any potential costly water or gas leaks.
*** Please note that in Western Australia it is highly recommended that a plumber inspect all components every second year due to extremely poor water quality
Rheem Stellar Stainless-Steel Model — $280+
Rheem Stellar Standard (non-stainless steel) — $520+• Ensure the unit is between 4 and 7 years old or due
for 5-yearly service
• Remove burner and pilot assembly and clean debris and injectors
• Supply and install replacement anodes (if applicable)
• Supply and install 15mm cold relief valve
• Supply and install 15mm hot relief valve
NOTE: To only supply and install cold relief = $140+, hot relief = $160+, BOTH hot and cold relief valves = $240+
Additional Extras• If either valve is 20mm OR a PTR extension,
then an extra $25+ per valve will be added
• If a standard tempering valve is present and requires changing an extra $100+ will be added
• If there is no gas valve present an extra $30+ will be added to supply and cut in a 15mm Dura Eagle gas cock
• If there are issues with the burner, pilot assembly or thermostat (gas control valve) then this price will include a basic inspection and remedy up to 10 minutes only
Rheem Stellar Service Information
“The average lifespan of a storage tank is 10 years.
Performing a service every 4-7 years will ensure your tank can last
for 30+ years”
Supply and Install Electric Hot Water Systems
Product Sell Price: $800+
Inclusions• Provide Plumbing Certification• Supply of new hot and cold relief valves • Removal of old unit and box from site• Includes original fault finding visit up to 30 mins only (same visit)• All plumbing & electrical • LIFETIME WARRANTY on workmanship• Leave the user manual with the client/tenant • To commission and submit compliance paperwork to local authority• Supply and install hot water lagging Additional Extras• Supply and install of 1 x new gravel pit (external installations) – add an extra $50+ per pit• For internal installations without a drain tray this will be required to be quoted on site to determine the
possibility of drainage • If an electrician is required for disconnect/reconnect add an extra $180+• If a tempering valve is required (changing from existing temp valve only) add an extra $100+gst• If pipe works alterations are required a MINIMUM of $50+ should be added to cover costs • If the unit is not 10mm above finished floor height and a slab is required, add an extra $30+• If the client wishes to change from storage to instantaneous a quotation will be provided• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues)
OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
• If there is an electrical fault on completion that requires new fuse wire OR a 20amp plug in breaker add an extra $50+
315L, 250L, 160L,125L and 80L * All units available in 3.6kw * Dual Handed
Size and DimensionsHeight: 670 mm | Diameter: 405 mm | Capacity: 50 ltr | Electrical Entry Height: 70 mm | Inlet Height: 145 mm Outlet Height: 490 mm | Approximate Weight (empty): 23 kg
WarrantyCylinder Warranty: 7 Years Spare Parts and Labour: 12 Month
DescriptionThermann Electric Hot Water Unit Year Single Element 50ltr 3.6Kw
Product InformationNumber of Elements: Single element Website: www.thermann.com.au
Technical InformationElement Size: 3.6 kW Hot Water Delivery: 50 ltr Relief Valve Setting: 1000 kPa System Connections: Dual Handed Information: * Also available in 400L,
THERMANN 50L
*will price match any written quote*
14 15
HOT WATER SYSTEMSHOT WATER SYSTEMS
Product Sell Price: $850+
Inclusions• Provide Plumbing Certification• Supply of new hot and cold relief valves • Removal of old unit and box from site• Includes original fault finding visit up to 30 mins only (same visit)• All plumbing & electrical • LIFETIME WARRANTY on workmanship• Leave the user manual with the client/tenant • To commission and submit compliance paperwork to local authority • Supply and install hot water laggingAdditional Extras• Supply and install of 1 x new gravel pit (external installations) – add an extra $50+ per pit• For internal installations without a drain tray this will be required to be quoted on site to determine the
possibility of drainage • If an electrician is required for disconnect/reconnect add an extra $180+• If a tempering valve is required (changing from existing temp valve only) add an extra $100+gst• If pipe works alterations are required a MINIMUM of $50+ should be added to cover costs • If the unit is not 10mm above finished floor height and a slab is required, add an extra $30+• If the client wishes to change from storage to instantaneous a quotation will be provided• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues)
OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
• If there is an electrical fault on completion that requires new fuse wire OR a 20amp plug in breaker add an extra $50+
Technical InformationElement Size: 3.6 kW Hot Water Delivery: 50 ltr Relief Valve Setting: 1400 kPa System Connections: Dual Handed
Warranty Cylinder Warranty: 5 Years Spare Parts and Labour: 12 Months
DescriptionRheem Electric Hot Water Unit Single Element 50ltr 3.6Kw
Product InformationNumber of Elements: Single element Website: www.rheem.com.au
RHEEM 50L
Supply and Install Electric Hot Water Systems
Product Sell Price: $960+
Supply and Install Electric Hot Water Systems
Inclusions• Provide Plumbing Certification• Supply of new hot and cold relief valves • Removal of old unit and box from site• Includes original fault finding visit up to 30 mins only (same visit)• LIFETIME WARRANTY on workmanship• Leave the user manual with the client/tenant • To commission and submit compliance paperwork to local authority • Supply and install hot water lagging
Additional Extras• Supply and install of 1 x new gravel pit (external installations) – add an extra $50+ per pit• For internal installations without a drain tray this will be required to be quoted on site to determine
the possibility of drainage • If a tempering valve is required (changing from existing temp valve only) add an extra $100+• If an electrician is required for disconnect/reconnect add an extra $180+• If the unit is not 10mm above finished floor height and a slab is required, add an extra $30+• Additional visits will incur an additional fee
• If the client wishes to change from storage to instantaneous a quotation will be provided• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues)
OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
DescriptionThermann Electric Hot Water Unit 10 Year Single Element 80ltr 3.6Kw
Product InformationNumber of Elements: Single element Website: www.thermann.com.au
Technical InformationElement Size: 3.6 kW Hot Water Delivery: 80 ltr Relief Valve Setting: 1000 kPa Relief Valve Temperature: 99 deg C Relief Valve Power Rating (kW): 10 kW System Connections: Dual Handed
THERMANN 80L
Information: * Available in 400L, 315L, 250L, 160L,125L and 80L * All units available in 3.6kw * Dual Handed
Size and DimensionsHeight: 925 mm | Diameter: 490 mm Capacity: 88 ltr | Electrical Entry Height: 85 mm Inlet Height: 160 mm Outlet Height: 735 mm Approximate Weight (empty): 41 kg
WarrantyCylinder Warranty: 10 Years Spare Parts and Labour: 12 Months
*will price match any written quote**will price match any written quote*
16 17
HOT WATER SYSTEMSHOT WATER SYSTEMS
Supply and Install Electric Hot Water Systems
Information: * Available in 400L, 315L, 250L, 160L,125L and 80L * All units available in 3.6kw * Dual Handed
Size and DimensionsHeight: 1090 mm| Diameter: 530 mm Capacity: 130 ltr Electrical Entry Height: 100 mm Inlet Height: 190 mm Outlet Height: 865 mm Approximate Weight (empty): 51 kg
WarrantyCylinder Warranty: 10 Years Spare Parts and Labour: 12 Months
DescriptionThermann Electric Hot Water Unit 10Year Single Element 125ltr 3.6Kw
Product InformationNumber of Elements: Single element Website: www.thermann.com.au
Technical InformationElement Size: 3.6 kW Hot Water Delivery: 125 ltr Relief Valve Setting: 1000 kPa Relief Valve Temperature: 99 deg C Relief Valve Power Rating (kW): 10 kW System Connections: Dual Handed
Product Sell Price: $1,100+
Inclusions• Provide Plumbing Certification• Supply of new hot and cold relief valves • Removal of old unit and box from site• Includes original fault finding visit up to 30 mins only (same visit)• LIFETIME WARRANTY on workmanship• Leave the user manual with the client/tenant • To commission and submit compliance paperwork to local authority
• Supply and install hot water laggingAdditional Extras• To upgrade to 160L - additional $100+• Supply and install of 1 x new gravel pit (external installations) – add an extra $50+ per pit• For internal installations without a drain tray this will be required to be quoted on site to determine
the possibility of drainage • If a tempering valve is required (changing from existing temp valve only) add an extra $100+• If an electrician is required for disconnect/reconnect add an extra $180+• If the unit is not 10mm above finished floor height and a slab is required, add an extra $30+• Additional visits will incur an additional fee• If the client wishes to change from storage to instantaneous a quotation will be provided• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues)
OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
THERMANN 125L
Product Sell Price: $1050+
Inclusions• Provide Plumbing Certification• Supply of new hot and cold relief valves • Removal of old unit and box from site• Includes original fault finding visit up to 30 mins only (same visit)• All plumbing & electrical • LIFETIME WARRANTY on workmanship• Leave the user manual with the client/tenant • To commission and submit compliance paperwork to local authority • Supply and install hot water lagging
Additional Extras• Supply and install of 1 x new gravel pit (external installations) – add an extra $50+ per pit• For internal installations without a drain tray this will be required to be quoted on site to determine
the possibility of drainage • If an electrician is required for disconnect/reconnect add an extra $180+• If a tempering valve is required (changing from existing temp valve only) add an extra $100+gst• If pipe works alterations are required a MINIMUM of $50+ should be added to cover costs • If the unit is not 10mm above finished floor height and a slab is required, add an extra $30+• If the client wishes to change from storage to instantaneous a quotation will be provided• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues)
OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
• If there is an electrical fault on completion that requires new fuse wire OR a 20amp plug in breaker add an extra $50+
WarrantyCylinder Warranty: 12 Years Spare Parts and Labour: 12 Months
DescriptionRheem Electric Hot Water Unit 80L Single Element 80ltr 3.6Kw
Product InformationNumber of Elements: Single element Website: www.rheem.com.au
Technical InformationElement Size: 3.6 kW Hot Water Delivery: 80 ltr Relief Valve Setting: 1400 kPa System Connections: Dual Handed
RHEEM 80L
Supply and Install Electric Hot Water Systems
*will price match any written quote**will price match any written quote*
19
HOT WATER SYSTEMS
18
HOT WATER SYSTEMS
Product Sell Price: $1100+
WarrantyHeat Exchanger Warranty: 10 Years Spare Parts and Labour: 3 Years
DescriptionRheem 12L Continuous Flow Hot Water Unit 50 Degree Natural Gas
Product InformationGas Type: Natural Gas Website: www.rheem.com.au
Technical InformationStar Rating: 6 star
Inclusions • Includes original fault finding visit up to 30 mins only (same visit)
• Manometer test houses gas line
NOTE: If a gas leak is present, entire job will be charged at time & materials
• To commission and submit compliance paperwork to local authority
• Supply and install hot water lagging
Additional Extras• If a valve kit is required on any of the above units add an extra $100+
• NOTE: 50-degree models to be used only unless otherwise requested. If 60-degree model requested a tempering valve must be installed and $100 will be added. If it is a 100% like-for-like change-over no tempering valve is required
• If pipe works alterations are required a MINIMUM of $50+ should be added to cover costs
• If a controller is required add an extra $100+ per controller (install only) within 10m of HWS
• To upgrade gas to 20mm within a 5m straight run of existing gas point or meter box add an extra $250+
• If a weatherproof power point (GPO) is required add an extra $220+ (single story house only)
• If the unit requires a ladder to install, then a second person will be required and $100+gst will be added
RHEEM 12L
Supply and Install Natural Gas Hot Water Systems
Electric Storage Hot Water Service Information
PLEASE SEE BELOW THE STANDARD SERVICING REQUIREMENTS FOR OPTIMAL PERFORMANCEPlumber Required Sacrificial anode – Replace every 4-5 years PTR (hot relief) valve — Replace every 5 years Cold relief valve – Replace every 5 years Tempering valve – Replace every 5 years
Home Owner / ResidentPTR (hot relief) valve – Manually release every 3-6 months Cold relief valve – Manually release every 3-6 months Visually inspect – It is highly recommended that a visual inspection takes place monthly. This is to inspect for any potential costly water leaks. Circuit Breaker – Manually test/inspect the circuit breaker at the electrical board once every 6-12 months.
*** Please note that in Western Australia it is highly recommended that a plumber inspect all components every second year due to extremely poor water quality
Storage Hot Water System Service — $450+
• Ensure the unit is between 4 and 7 years old or due for 5-yearly service
• Remove burner and pilot assembly and clean debris and injectors
• Supply and install 1 x replacement anode
• Supply and install 15mm cold relief valve
• Supply and install 15mm hot relief valve
NOTE: To only supply and install cold relief = $140+, hot relief = $160+, BOTH hot and cold relief valves = $240+
Additional Extras• If either valve is 20mm OR a PTR extension,
then an extra $25+ per valve will be added
• If a standard tempering valve is present and requires changing an extra $100+ will be added
• If there is no gas valve present an extra $30+ will be added to supply and cut in a 15mm Dura Eagle gas cock
• If there are issues with the element or thermostat then this price will include a basic inspection and remedy up to 10 minutes only
“The average lifespan of a storage tank is 10 years.
Performing a service every 4-7 years will ensure your tank can last
for 30+ years”
*will price match any written quote*
20 21
Minimum Supply Pressure: 120 kPa Rating: 6 Star Energy Rating Temperature Setting: 50 deg C
Size and DimensionsHeight: 520 mm | Width: 355 mm | Depth: 187 mm | Approximate Weight (empty): 16 kg
WarrantyCylinder Warranty: 10 Years Warranty Information: 3 years parts and labour for domestic (non-commercial) installations only
DescriptionRheem Metro Max 26L Natural Gas 50 Degree Continuous Flow Hot Water System
Product InformationGas Type: Natural Gas Product Type: Continuous Flow Number of People to property: 2-5
Technical InformationFlow Rate: 26 ltr/min Maximum Supply Pressure: 1,000 kPa |
Product Sell Price: $1,300+
Inclusions • Includes original fault finding visit up to 30 mins only (same visit)
• Manometer test houses gas line
NOTE: If a gas leak is present, entire job will be charged at time and materials
• To commission and submit compliance paperwork to local authority
• Supply and install hot water lagging
Additional Extras• NOTE: 50-degree models to be used only unless otherwise requested. If 60-degree model
requested a tempering valve must be installed and $100 will be added.
If it is a 100% like-for-like change-over no tempering valve is required
• If a controller is required add an extra $100+ per controller (install only) within 10m of HWS
• To upgrade gas to 20mm within a 5m straight run of existing gas point or meter box add an extra $250+
• If a weatherproof power point (GPO) is required add an extra $250+ (single story house only)
• Additional visits will incur an additional fee
• If the unit requires a ladder to install, then a second person will be required and $100+ will be added
HOT WATER SYSTEMS
RHEEM 26L
Rating: 5 Star Energy Rating Temperature Setting: 50 deg C
Size and DimensionsHeight: 520 mm | Width: 355 mm | Depth: 160 mm | Approximate Weight (empty): 18 kg
WarrantyCylinder Warranty: 10 Years Warranty Information: 3 years parts and labour for domestic (non-commercial) installations only
DescriptionRheem Integrity 20L Natural Gas Continuous Flow Hot Water System
Product InformationGas Type: Natural Gas Product Type: Gas Continuous Flow Only external model available
Technical InformationFlow Rate: 20 ltr/min Maximum Supply Pressure: 1,000 kPa | Minimum Supply Pressure: 120 kPa
Product Sell Price: $1,200+
Inclusions • Includes original fault finding visit up to 30 mins only (same visit)
• To commission and submit compliance paperwork to local authority
• Supply and install hot water lagging
Additional Extras• NOTE: 50-degree models to be used only unless otherwise requested. If 60-degree model requested
a tempering valve must be installed and $100 will be added If it is a 100% like-for-like change-over no tempering valve is required
• If a controller is required add an extra $100+ per controller (install only) within 10m of HWS
• To upgrade gas to 20mm within a 5m straight run of existing gas point or meter box add an extra $250+
• If a weatherproof power point (GPO) is required add an extra $250+ (single story house only)
• Additional visits will incur an additional fee
• If the unit requires a ladder to install, then a second person will be required and $100+ will be added
HOT WATER SYSTEMS
RHEEM 20L
Supply and Install Natural Gas Hot Water Systems
Supply and Install Natural Gas Hot Water Systems
22 23
HOT WATER SYSTEMSHOT WATER SYSTEMS
Product Sell Price: $1,200+
Product Sell Price: $1,300+
Supply and Install Natural Gas Hot Water Systems
Supply and Install Natural Gas Hot Water Systems
THERMANN 26L
DescriptionThermann 6* 26ltr Continuous Flow Hot Water Unit 50 Degree Natural Gas
Product InformationCountry of Origin: Japan Gas Type: Natural Gas Website: www.thermann.com.au
Technical InformationCapacity (at 25 deg C rise): 26 ltr/min Gas Connection: R3/4” (20mm) Gas Consumption: 200 MJ/h Relief Valve Setting: 1400 kPa Star Rating: 6.1 star
Temperature Setting: 50 deg C Water Connections: R3/4” (20mm) Information: Available in 16L, 20L and 26L models Available in Natural Gas and LPG models 2 unit Manifolding Ability (26L models only) Universal controller available as optional accessory
Size and DimensionsHeight: 520 mm | | Width: 350 mm Depth: 200 mm | Weight (Dry): 16 kg
WarrantyHeat Exchanger Warranty: 12 Years Spare Parts and Labour: 3 Year
Inclusions • Includes original fault finding visit up to 30 mins only (same visit)
• Manometer test houses gas line
NOTE: If a gas leak is present, entire job will be charged at time and materials
• To commission and submit compliance paperwork to local authority
• Supply and install hot water lagging
Additional Extras• NOTE: 50-degree models to be used only unless otherwise requested. If 60-degree model
requested a tempering valve must be installed and $100 will be added.
If it is a 100% like-for-like change-over no tempering valve is required
• If a controller is required add an extra $100+ per controller (install only) within 10m of HWS
• To upgrade gas to 20mm within a 5m straight run of existing gas point or meter box add an extra $250+
• If a weatherproof power point (GPO) is required add an extra $250+ (single story house only)
• Additional visits will incur an additional fee
• If the unit requires a ladder to install, then a second person will be required and $100+ will be added
Inclusions • Includes original fault finding visit up to 30 mins only (same visit)
• To commission and submit compliance paperwork to local authority
• Supply and install hot water lagging
Additional Extras• NOTE: 50-degree models to be used only unless otherwise requested. If 60-degree model requested
a tempering valve must be installed and $100 will be added If it is a 100% like-for-like change-over no tempering valve is required
• If a controller is required add an extra $100+ per controller (install only) within 10m of HWS
• To upgrade gas to 20mm within a 5m straight run of existing gas point or meter box add an extra $250+
• If a weatherproof power point (GPO) is required add an extra $250+ (single story house only)
• Additional visits will incur an additional fee
• If the unit requires a ladder to install, then a second person will be required and $100+ will be added
DescriptionThermann 6* 20ltr Continuous Flow Hot Water Unit 50 Degree Natural Gas
Product InformationCountry of Origin: Japan Gas Type: Natural Gas Website: www.thermann.com.au
Technical InformationCapacity (at 25 deg C rise): 20 ltr/min Gas Connection: R3/4” (20mm) Gas Consumption: 158 MJ/h Relief Valve Setting: 1400 kPa Star Rating: 6.5 star
Temperature Setting: 50 deg C Water Connections: R3/4” (20mm) Information: Available in 16L, 20L and 26L models Available in Natural Gas and LPG models Universal controller available as optional accessory
Size and DimensionsHeight: 520 mm | Width: 350 mm Depth: 200 mm | Weight (Dry): 15 kg
WarrantyHeat Exchanger Warranty: 12 Years Spare Parts and Labour: 3 Years
THERMANN 20L
*will price match any written quote**will price match any written quote*
24 25
HOT WATER SYSTEMSHOT WATER SYSTEMS
Product Sell Price: $1,250+
Product Sell Price: $1,500+
Supply and Install Natural Gas Hot Water Systems
Supply and Install Natural Gas Hot Water Systems
Inclusions • Includes original fault finding visit up to 30 mins only (same visit)
• To commission and submit compliance paperwork to local authority
• Supply and install hot water lagging
Additional Extras• NOTE: 50-degree models to be used only unless otherwise requested. If 60-degree model requested
a tempering valve must be installed and $100 will be added If it is a 100% like-for-like change-over no tempering valve is required
• If a controller is required add an extra $100+ per controller (install only) within 10m of HWS
• To upgrade gas to 20mm within a 5m straight run of existing gas point or meter box add an extra $250+
• If a weatherproof power point (GPO) is required add an extra $220+ (single story house only)
• Additional visits will incur an additional fee
• If the unit requires a ladder to install, then a second person will be required and $100+ will be added
Temperature Setting: 50 deg C Water Connections: 3/4” (20mm) Information: Available in 16L, 20L and 26L models. Available in Natural Gas and LPG models
Size and DimensionsHeight: 530 mm | Width: 350 mm Depth: 194 mm | Number of People: 2-3 Weight (Dry): 15 kg
WarrantyHeat Exchanger Warranty: 10 Years Spare Parts and Labour: 3 Years
DescriptionRinnai Builders B20 Continuous Flow Hot Water Unit 50 Degree Natural Gas
Product InformationGas Type: Natural Gas Installation: External
Technical InformationCapacity (at 25 deg C rise): 20 ltr/min Gas Connection: 3/4” (20mm) Gas Consumption: 160 MJ/h Minimum Water Pressure: 160 kPa Maximum Water Pressure: 1000 kPa Star Rating: 6.1 Star
RINNAI B20
Inclusions • Includes original fault finding visit up to 30 mins only (same visit)
• To commission and submit compliance paperwork to local authority
• Supply and install hot water lagging
Additional Extras• NOTE: 50-degree models to be used only unless otherwise requested. If 60-degree model requested
a tempering valve must be installed and $100 will be added If it is a 100% like-for-like change-over no tempering valve is required
• If a controller is required add an extra $100+ per controller (install only) within 10m of HWS
• To upgrade gas to 20mm within a 5m straight run of existing gas point or meter box add an extra $250+
• If a weatherproof power point (GPO) is required add an extra $220+ (single story house only)
• Additional visits will incur an additional fee
• If the unit requires a ladder to install, then a second person will be required and $100+ will be added
RINNAI INFINITY 26L
DescriptionInfinity 26Ltr Continuous Flow External Hot Water Unit 50 Degree Natural Gas
Product InformationGas Type: Natural Gas Installation: External Variations: Also available in other sizes and gas types
Technical InformationCapacity (at 25 deg C rise): 26 ltr/min Gas Connection: 3/4” (20mm) Gas Consumption: 199 MJ/h Minimum Water Pressure: 200 kPa
Maximum Water Pressure: 1000 kPa Star Rating: 6.1 Star Temperature Setting: 50 deg C Water Connections: 3/4” (20mm) Information: Available in Natural Gas and LPG models
Size and DimensionsHeight: 530 mm | Width: 350 mm Depth: 194 mm | Number of People: 4-6 Weight (Dry): 16 kg
WarrantyHeat Exchanger Warranty: 12 Years Spare Parts and Labour: 3 Years
*will price match any written quote**will price match any written quote*
26
HOT WATER SYSTEMS
27
HOT WATER SYSTEMS
Product Sell Price: $990+
Inclusions• Includes original fault finding visit up to 30 mins only (same visit)
• To commission and submit compliance paperwork to local authority
• Provide Plumbing Certification
• Removal of old unit and box from site
• LIFETIME WARRANTY on workmanship
• Supply and install hot water lagging
Additional Extras• To upgrade to 16P - additional $180+
• NOTE: 50-degree models to be used only unless otherwise requested. If 60-degree model requested a tempering valve must be install and $100 will be added If it is a 100% like-for-like change-over no tempering valve is required
• If a controller is required add an extra $100+ per controller (install only) within 10m of HWS
• To upgrade gas to 20mm within a 5m straight run of existing gas point or meter box add an extra $250+
• If a weatherproof power point (GPO) is required add an extra $250+ (single story house only)
• Additional visits will incur an additional fee
• If the unit requires a ladder to install, then a second person will be required and $100+ will be added
DescriptionRheem Pronto 12L Natural Gas Continuous Hot Water System
Product InformationGas Type: Natural Gas Product Type: Continuous Flow
Technical InformationFlow Rate: 12 ltr/min Maximum Supply Pressure: 800 kPa | Minimum Supply Pressure: 120 kPa Rating: 6 Star Energy Rating
Size and DimensionsHeight: 840 mm | Width: 388 mm | Depth: 285 mm | Approximate Weight (empty): 21 kg
WarrantyCylinder Warranty: 10 Years Warranty Information: 3 years parts and labour for domestic (non-commercial) installations only
RHEEM 12 PRONTO
Supply and Install Instant Hot Water Systems
Product Sell Price: $900+
Inclusions• Includes original fault finding visit up to 30 mins only (same visit)
• To commission and submit compliance paperwork to local authority
• Provide Plumbing Certification
• Removal of old unit and box from site
• LIFETIME WARRANTY on workmanship
• Supply and install hot water lagging
Additional Extras• To upgrade to 16P - additional $180+
• NOTE: 50-degree models to be used only unless otherwise requested. If 60-degree model requested a tempering valve must be install and $100 will be added If it is a 100% like-for-like change-over no tempering valve is required
• If a controller is required add an extra $100+ per controller (install only) within 10m of HWS
• To upgrade gas to 20mm within a 5m straight run of existing gas point or meter box add an extra $250+
• If a weatherproof power point (GPO) is required add an extra $250+ (single story house only)
• Additional visits will incur an additional fee
• If the unit requires a ladder to install, then a second person will be required and $100+ will be added
Maximum Supply Pressure: 1200 kPa Minimum Supply Pressure: 30 kPa Rating: 4.6 Star Energy Rating Information: Only external model available
Size and DimensionsHeight: 845 mm | Width: 405 mm Depth: 265 mm Approximate Weight (empty): 21 kg
WarrantyHeat Exchanger Warranty: 10 Years 2 years parts and labour for domestic (non-commercial) installations only
DescriptionBosch Standing Pilot TF250 10 ltr per minute external natural gas hot water unit
Product InformationGas Type: Natural Gas or LPG Variations: Also available in other sizes and gas types
Technical InformationCapacity (at 25 deg C rise): 10 ltr/min Continuous Flow Unit — Gas Connection: 20mm (NG), 15mm (LPG) Continuous Flow Unit — Water Connections: 15mm Flow Rate: 5 ltr/min
BOSCH 10P
Supply and Install Natural Gas Hot Water Systems
*will price match any written quote**will price match any written quote*
28 29
HOT WATER SYSTEMS
Supply and Install Instant Hot Water Systems
Electrical Supply: 20 Amps per phase Flow Rate: 4.5 ltr/min Power Input: 13.2 kW
Size and DimensionsHeight: 210 mm | Width: 360 mm Depth: 125 mm | Capacity: 0.5 ltr
WarrantyWarranty Information: 2 years full parts and labour
Product InformationProduct Type: Instantaneous Electric Hot Water System Installation: Internal Installation Requirement: Installation requirements as per AS/NZS3000 and AS/NZS3500.4.2 as well as local requirements Website: www.stiebel.com.au
FinishColour: White
Technical InformationAmps: 20 Amps
Product Sell Price: $880+
Inclusions• Provide Plumbing Certification
• Dispose of old unit and box into client/tenant’s bin
• Includes original fault finding visit up to 30 mins only (same visit)
• All plumbing and electrical
• LIFETIME WARRANTY on workmanship
• Leave the user manual with the client/tenant
• Supply and install hot water lagging
Additional Extras• For electrical disconnect/reconnect - additional $180+
• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues) OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
• Additional visits will incur an additional fee
• NOTE: These units are not 100% sufficient to control an entire house/unit/apartment style set up. We recommend upgrading to gas (if available) as first preference, electric storage as second preference OR Steibel DHB-e13 as third preference. Only install Simple X unit if no other option.
HOT WATER SYSTEMS
STIEBEL ELTRON SIMPLE X
Supply and Install Instant Hot Water Systems
Inclusions• Provide Plumbing Certification
• Dispose of old unit and box into client/tenant’s bin
• Includes original fault finding visit up to 30 mins only (same visit)
• All plumbing & electrical
• LIFETIME WARRANTY on workmanship
• Leave the user manual with the client/tenant
• Supply and install hot water lagging
Additional Extras• For electrical disconnect/reconnect - additional $180+
• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues) OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
• NOTE: These units are not 100% sufficient to control an entire house/unit/apartment style set up. We recommend upgrading to gas (if available) as first preference, electric storage as second preference OR Steibel DHB-e13 as third preference. Only install Super X unit if no other option is available.
• If there is an electrical fault on completion that requires new fuse wire OR a 20amp plug in breaker add an extra $50+
Product Sell Price: $880+
Technical InformationAmps: 18 Amps Electrical Supply: 18 Amps per phase
Product InformationProduct Type: Instantaneous Electric Hot Water System Installation: Internal Installation Requirement: Installation requirements as per AS/NZS3000 and AS/NZS3500.4.2 as well as local requirements
FinishColour: White
WILSON SUPER X
*will price match any written quote**will price match any written quote*
30 31
Supply and Install Instant Hot Water Systems
Amps: 20 Amps Electrical Supply: 3 phase Flow Rate: 3.0 ltr/min Maximum Water Pressure: 1000 kPa Power Input: 14.4 kW
Size and DimensionsSize: H 478mm x W 225mm x D 105mm Height: 478 mm | Width: 225 mm Depth: 105 mm | Capacity: 0.4 ltr
WarrantyWarranty Information: 5 year full parts and labour domestic warranty* *Conditions apply — refer to warranty policy for full details.
Product InformationProduct Type: Instantaneous Electric Hot Water System Installation: Internal Installation Requirement: as per AS/NZS3000 and AS/NZS3500.4.2 as well as local requirements Website: www.stiebel.com.au
FinishColour: White
Technical Information
Product Sell Price: $1,750+
Inclusions• Provide Plumbing Certification
• Dispose of old unit and box into client/tenant’s bin
• Includes original fault finding visit up to 30 mins only (same visit)
• Electrician to run 4mm cable from up-to-date electrical board within 15 meters of board (single-story house only)
• All plumbing and electrical
• LIFETIME WARRANTY on workmanship
• Leave the user manual with the client/tenant
Additional Extras• For electrical disconnect/reconnect - additional $180+
• If the cold-water isolation valve is a garden tap, the original DUO Valve (too many water hammer issues) OR leaking in any way then this MUST be changed. An extra $50+ will be added to supply and install 15mm Tomson NRI ball valve
• Multi story houses or apartments OR older style electrical boards containing porcelain fuses will require a pre inspection
• Additional visits will incur an additional fee
HOT WATER SYSTEMS
STIEBEL ELTRON Dbh-E13
Solar Hot Water Systems
HOT WATER SYSTEMS
Every year thousands of Australians are seeing the light and
choosing energy from the sun. But investing in solar energy is
a big decision. Don’t be swayed by a quick deal and lose sight
of what matters most: quality, efficiency and long-term reliability.
WHY YOU SHOULD INSIST ON SOLARAn unrivalled commitment to quality and testing.All solar systems are designed and manufactured for the harshest Australian conditions. Quality is ingrained in everything we do and every component is rigorously tested to ensure minimal energy losses and maximum energy yields.
Australia’s free energy experts for over 60 yearsStarting with a free on-site solar assessment, we’ll recommend the right system, the right size, and the right configuration for your budget and your energy consumption. Using our solar savings calculator, we’ll then estimate the savings you’ll make by switching to solar. Our solar systems are only available through authorised solar dealers and our professional installers are fully trained to exacting standards.
Create a more sustainable lifestyleBy switching to an energy source that’s clean and green, like solar, you’ll create a more sustainable lifestyle and help reduce your carbon footprint.
Roof Mounted SystemsOur range of thermosiphon systems feature roof-mounted solar collectors closely coupled to a storage tank and are perfect for people with limited space at ground level. The system is both reliable and low maintenance, as it does not require a pump to circulate fluid around the system.
Split SystemsThese systems combine slim roof-mounted collectors with a tank that can be installed discreetly on the ground for minimal visual impact. Split systems use an electric pump to circulate fluid from the tank through the collectors to harness the suns energy.
SOLAR HOT WATER – WITHOUT ANY COMPROMISESKey Features:
• Wide range of collectors designed for Australian conditions.
• Reliable, low maintenance operation
• Stylish slimline design on split systems for minimum visual impact
• Roof-mounted tanks feature solar super-shield enamel protection
*will price match any written quote*
32 33
Product Sell Price: $280+
POSH SOLUS MKII GOOSENECK SINK MIXER
Inclusions• To supply and install 2 x standard isolation valves add an extra $50+• To test thoroughly and provide before and after photo’s • If you wish to convert from standard tapset to mixer onsite quotation will be requiredWant to bring your own? • To install like-for-like client supplied kitchen sink mixer = $100+
DescriptionPOSH Solus MKII Gooseneck Sink Mixer Chrome (4*)
Product InformationTrend: Family Outlet Movement: Swivel Outlet Shape: Curved Gooseneck
FinishColour: Chrome
MaterialMaterial: Brass
Size and DimensionsClearance: 245 mm Reach: 180 mm
WarrantyWarranty — Domestic Use: 7 Years Cartridge — Domestic Use: 7 Years Spare Parts and Labour: 12 Months
WELSRating: 4 Star Rating Measure: 7.5 Litres Per Minute
Supply and Install Tapware — KitchenTapware
TAPWARE
34 35
Additional Extras • To supply and install 2 x standard isolation valves add an extra $50+
• If you wish to convert from standard tapset to mixer onsite quotation will be required
Want to bring your own? • To install like-for-like client supplied basin sink mixer = $100+
Product Sell Price: $180+
DescriptionBase MK2 Sink Mixer Chrome (4*)
Product InformationTrend: Family Outlet Movement: Swivel
FinishColour: Chrome
MaterialMaterial: Brass
Technical InformationCartridge Type: Brass Information: Also available in 6 Star.
Size and DimensionsCartridge Size: 40 mm
WarrantyWarranty — Domestic Use: 12 Months Replacement Warranty: 12 Months Spare Parts and Labour: 12 Months
WELSRating: 4 Star Rating Measure: 7.5 Litres Per Minute
BASE KITCHEN/LAUNDRY SINK MIXER Base Mk2 Sink Mixer Chrome
TAPWARE
Supply and Install Tapware — Kitchen
TAPWARE
Supply and Install Tapware — Bathroom
THERM-OZ THERMOSTATIC SHOWER
WHAT IS A THERMOSTATIC MIXING VALVE? A thermostatic mixing valve has a wax filled thermostat cartridge, that blends hot water with cold water to ensure constant safe water outlet temperatures, even if other taps or appliances are used at the same time. The valve also shuts off rapidly in the event of a hot or cold supply failure, to help prevent scalding or thermal shock. This provides increased safety whilst showering.
The use of a thermostatic valve, rather than a manual system, gives user comfort, ensuring a constant water temperature. This is a great idea if young children or elderly use the shower. Easy to operate and water saving.
If you have a two-tap shower, this system can be installed by our plumber, replacing your conventional two-tap setup with NO pipework or tiling alteration - even if your handles are fitted vertically. This can NOT be used to convert a single lever mixer though.
DescriptionTherm-Oz is the perfect alternative to performing a full breech replacement. Not only will it avoid having to perform invasive works and removing of tiles, it comes with a thermostatic mixing valve to assist in setting your shower to the perfect temperature.
FinishColour: Chrome
RatingWels rated 3 star shower
FeaturesConstant temperature Safety temperature set button Safe for children & elderly Easy to operate Water saving Watermark approved valve
WarrantyDomestic Use: 5 Years
Websitewww.therm-oz.net.au
Product Sell Price: $650+
36 37
Supply and Install Tapware — Bathroom
MaterialMaterial: Brass
WarrantyWarranty — Domestic Use: 7 Years Spare Parts and Labour: 12 Months
DescriptionPosh Bristol Wall Top Assembly Taps
Chrome Product Information Trend: Traditional
FinishColour: Chrome
Product Sell Price: $160+
Additional Extras • To supply and install shower head/rose as well add an extra $30+
• To supply and upgrade to shower rail add an extra $200+ NOTE: If existing shower breech requires re-seating add an extra $20+
Want to bring your own? • To install like-for-like client supplied wall taps = $100+
NOTE: No warranty can be given on client supplied tapware for various reasons
TAPWARE
POSH BRISTOL WALL TAPS
Product Sell Price: $190+
DescriptionPosh Bristol Shower Set Chrome (3*)
Product InformationTrend: Traditional Mounting: Wall Mounted Outlet Movement: Adjustable Product Shape: Round Shower Arm: Included
FinishColour: Chrome Colour Variations (Prices May Vary): Chrome, White/Chrome, White/Gold, Ivory/Chrome, Ivory/Gold, Chrome/Gold
MaterialMaterial: Brass
Technical InformationMin Continuous Working Pressure: 150 kPa Max Continuous Working Pressure: 500 kPa Retrofit Suitability: Suitable Spindle: Jumper Valve
Size and DimensionsReach: 228 mm Shower Arm Length: 140 mm
WarrantyWarranty — Domestic Use: 7 Years Spare Parts and Labour: 12 Months
POSH BRISTOL SHOWER SET
Additional Extras • To supply and install shower head/rose as well add an extra $30+
• To supply and upgrade to shower rail add an extra $180+ NOTE: If existing shower breech requires re-seating add an extra $20+
Want to bring your own? • To install like-for-like client supplied wall taps and shower head/rose = $100+
NOTE: No warranty can be given on client supplied tapware for various reasons
TAPWARE
Supply and Install Tapware — Bathroom
WELSRating: 3 Star Rating Measure: 9 Litres Per Minute
38 39
Additional Extras • NOTE: Whilst we take the utmost care, should pipework in wall not be clearly identified there
is an extremely rare occasion where it may be possible to drill through water piping and extras may be incurred to make good.
• If existing shower breech requires re-seating add an extra $20+• If shower has porcelain tiles add an extra $25+• To convert from shower tapset to shower mixer add an extra $500+ (SEE BREECH/MIXER REPLACEMENT SCOPE and add to cart – 25% discount given per
additional item added to cart)• Alternatively, we can supply and install the BASE model for $230+Want to bring your own? • To install like-for-like client supplied shower rail = $150+
NOTE: No warranty can be given on client supplied tapware for various reasons
Product Sell Price: $350+
FinishColour: Chrome
Technical Information Functions: 7 Functions: Spray, Bubble, Jet, Spray and Bubble, Spray and Jet, Eco and Pause. Recommended Pressure Range: 150 — 500 kPa Min Continuous Working Pressure: 150 kPa Max Continuous Working Pressure: 750 kPa Min Continuous Working Temp: 20 deg C Max Continuous Working Temp: 80 deg C
Size and DimensionsRail Length: 580 mm Shower Hose Length: 1.5 mtr
WarrantyWarranty — Domestic Use: 7 Years Spare Parts and Labour: 12 Months
WELSRating: 3 Star Rating Measure: 9 Litres Per Minute
POSH BRISTOL SHOWER RAIL
TAPWARE
Supply and Install Tapware — Bathroom
Description Posh Solus MK3 Rail Shower 1 Function Chrome (4 *)
Product InformationMounting: Wall Mounted Recommended Use: Domestic, hotel and commercial
FinishColour: Chrome Hand Shower Face Colour: Graphite
Technical Information Functions: 1 Function Recommended Pressure Range: 150 - 500 kPa
Min Continuous Working Pressure: 150 kPa Max Continuous Working Pressure: 500 kPa Max Continuous Working Temperature: 60 deg C
Size and DimensionsHandshower Diameter: 100mm Rail Length: 680 mm Shower Hose Length: 1500mm
WarrantyWarranty - Domestic Use: 10 Years Parts replacement only: 12 Months
POSH SOLUS MK3 HANDHELD SHOWER
Additional Extras • NOTE: Whilst we take the utmost care, should pipework in wall not be clearly identified there
is an extremely rare occasion where it may be possible to drill through water piping and extras may be incurred to make good.
• If existing shower breech requires re-seating add an extra $20+• If shower has porcelain tiles add an extra $25+• To convert from shower tapset to shower mixer add an extra $500+ (SEE BREECH/MIXER REPLACEMENT SCOPE and add to cart – 25% discount given per
additional item added to cart)• Alternatively, we can supply and install the BASE model for $230+Want to bring your own? • To install like-for-like client supplied shower rail = $150+
NOTE: No warranty can be given on client supplied tapware for various reasons
TAPWARE
Supply and Install Tapware — Bathroom
Product Sell Price: $220+
Description Posh Bristol Rail Shower Chrome (3*)
Product InformationTrend: Traditional Recommended Use: Domestic, hotel and commercial
WELSRating: 4 Star Rating Measure: 7.5 Litres Per Minute
40 41
Supply and Install Tapware — Bathroom
TAPWARE TAPWARE
Supply and Install Tapware — Bathroom
Product Sell Price: $500+
Product Sell Price: $280+
Inclusions• To lay groundsheet throughout entire shower, if any rubble or debris finds it way down the drain
and causes a blockage the plumber will be held responsible • To remove tiles by cutting INSIDE of the grout lines to minimize re-tiling on completion • To jackhammer wall and remove existing breech/mixer set-up• NOTE: Whilst we take the utmost care in jackhammering walls, unfortunately we cannot be responsible
for any possible patch works that may be encountered due to brittle walls and this may be charged as extra in the unlikely event damage occurs.
• To supply and install new shower/bath mixer• To re-cement wall in preparation for tiling • On completion cover the area with plastic should the tenant/client wish to continue to use their shower
until tiling has been completed • To test thoroughly and provide before and after photo’s Additional Extras • To supply & install base shower diverter = $600+
• To renew piping from shower taps to shower head in-wall an extra $150+ will be added (plumbing only)• NOTE: We offer re-tiling services and a quote can be provided upon completion of plumbing works• Tiler to install mixer handle on completion, should we have to return for this then an extra $80+
will be added • To supply and install new Posh Bristol shower taps add an extra $160+gst (separate visit)
Additional Extras • NOTE: Whilst we take the utmost care, should pipework in wall not be clearly identified there
is an extremely rare occasion where it may be possible to drill through water piping and extras may be incurred to make good.
• If existing shower breech requires re-seating add an extra $20+• If shower has porcelain tiles add an extra $25+• To convert from shower tapset to shower mixer add an extra $500+ (SEE BREECH/MIXER REPLACEMENT SCOPE and add to cart – 25% discount given per
additional item added to cart)• Alternatively, we can supply and install the BASE model for $230+Want to bring your own? • To install like-for-like client supplied shower rail = $150+
NOTE: No warranty can be given on client supplied tapware for various reasons
WarrantyWarranty — Domestic Use: 12 Months Replacement Warranty: 12 Months Spare Parts and Labour: 12 Months
DescriptionBase MK2 Shower Mixer Chrome
Product InformationTrend: Family
FinishColour: Chrome
MaterialMaterial: Brass
Size and DimensionsCartridge Size: 40 mm
Shower Mixer Change-Over / Breech Replacement
WarrantyWarranty - Domestic Use: 12 Months
Spare Parts and Labour: 12 Months
WELSRating: 3 Star Rating
Measure: 9 Litres Per Minute
Description Base Rail Shower Chrome (3*)
FinishColour: Chrome
Technical Information Functions: 1 Function.
Recommended Pressure Range: 150 - 500 kPa
Size and DimensionsRail Length: 580 mm
BASE SHOWER RAIL
42 43
Supply and Install Tapware — Bathroom
Size and DimensionsClearance: 49 mm | Reach: 101 mm
WarrantyWarranty — Domestic Use: 12 Months Replacement Warranty: 12 Months Spare Parts and Labour: 12 Months
WELSRating: 4 Star Rating Measure: 7.5 Litres Per Minute
DescriptionBase MK2 Basin Mixer Chrome (4*)
Product InformationTrend: Family
Outlet Movement: FixedProduct Shape: Round
FinishColour: Chrome
MaterialMaterial: Brass
Product Sell Price: $180+
Additional Extras • To supply and install 2 x standard isolation valves add an extra $50+
• If you wish to convert from standard tapset to mixer onsite quotation will be required
Want to bring your own? • To install like-for-like client supplied basin sink mixer = $100+
TAPWARE
BASE BASIN MIXER Base Mk2 Basin Mixer Chrome
Inclusions • To supply and install like-for-like replacement including new breech piece, tapware and spout.
Additional Extras • Whilst we take the utmost care in removing the existing basin set, there are rare occasions where the old
tapware is so corroded that damage may occur to the basin/vanity and extras may apply
Want to Bring Your Own?• To install only like-for-like client supplied basin set change-over = $150+gst
Product Sell Price: $250+
DescriptionRecommended use: Domestic, hotel and commercial Tapware Handle Type: Cross Handle Outlet Movement: Swivel Product Shape: Round
FinishColour: Chrome Colour Variations: Chrome, Chrome/Gold, White/Chrome, White/Gold, Ivory/Chrome, Ivory/Gold
Material
Material: Brass
Size and DimensionsHeight: 154mm | Clearance: 90mm | Reach 110mm
WarrantyWarranty - Domestic Use: 7 Years Spare Parts and Labour: 12 Months
POSH BRISTOL BASIN SET CHROME
TAPWARE
Supply and Install Tapware — Bathroom
4544
Quoss Tapware
TAPWARETAPWARE
Quoss Tapware
PRICING AND OPTIONS
Quoss Liberty II
• Modern kitchen/bath/laundry mixer
• 180 deg swivel function
Price to Supply and Install = $550+
* NOTE: Additional parts may be required.
Aroma Freedom
• Replaces wall mounted kitchen/bath/laundry taps
Price to supply and Install = $650+
* NOTE: Additional parts may be required.
Aroma Freestyle Shower
• External shower breech with rail
• No extra work involved such as cutting wall
• Drill free bar
• Shower rail and shower hose/head
Price to supply and install = $750+
* NOTE: Additional parts may be required.
WHAT IS QUOSS?Quoss is a new patented technology which allows you to retrofit ANY in wall tap set to a mixer style set up. It is the solution to any ancient tapware or any in wall breech which is beyond repair and requires replacing. In the past if the in-wall breech was beyond repair the only option would be to cut/jackhammer walls and tiles, renew the breech and then re-tile once complete. This is not only an invasive exercise but can also be a costly one too. Therefore, this new tapware allows our clients the option to save them the hassle of the previously mentioned exercise and instead install Quoss tapware.
How does it work?
46
Bathrooms
47
Product Sell Price: $400+
Size and DimensionsHeight: 850 mm | Width: 418 mm
PANWELS4 Star Rating Measure: 4.5/3 3.5 Average Ltrs Per Flush
MaterialMaterial: Vitreous China
SummaryLink Cistern
Product InformationProduct Type: Cistern
FinishColour: White
MaterialMaterial: Plastic
Base Link Toilet Suite with Seat
Inclusions• To remove old to client/tenant’s bin only
• To test thoroughly and provide before and after photo’s
• NOTE: Painting of wall may be necessary on completion as existing cistern may be larger than the new one. This will incur additional costs if necessary.
• NOTE: Whilst we take the utmost care in removing the existing toilet there are rare occasions that are out of our control where the tiles/lino may be lifted in which will be charged as extra to make good
Additional Extras • NOTE: if a non-standard scenario is encountered (eg. Moving to a rear entry water supply etc. then
this will be quoted upon arrival)
• If cement base required, an extra $50+ will be chargeable for cement/mortar (no quick-set product such as jetcrete is to be used as it has potential to crack the pan)
• If a replacement flexible hose is required, an extra $15+ will be added
• If a replacement cold water isolation is required, an extra $25+ will be added
• If an offset pan adaptor is required, an extra $30+ will be added
Want to supply your own?• To change over like-for-like client supplied toilet suite with silicone base = $220+gst
Supply and Install Toilet Suites
TOILET SUITES
4948
Product Sell Price: $550+
Inclusions• To remove old to client/tenant’s bin only
• To test thoroughly and provide before and after photo’s
• NOTE: Painting of wall may be necessary on completion as existing cistern may be larger than the new one. This will incur additional costs if necessary.
• NOTE: Whilst we take the utmost care in removing the existing toilet there are rare occasions that are out of our control where the tiles/lino may be lifted in which will be charged as extra to make good
Additional Extras • NOTE: if a non-standard scenario is encountered (eg. Moving to a rear entry water supply etc. then this
will be quoted upon arrival)
• If cement base required, an extra $50+ will be chargeable for cement/mortar (no quick-set product such as jetcrete is to be used as it has potential to crack the pan)
• If a replacement flexible hose is required, an extra $15+ will be added
• If a replacement cold water isolation is required, an extra $25+ will be added
• If an offset pan adaptor is required, an extra $30+ will be added
Want to supply your own? • To change over like-for-like client supplied toilet suite with silicone base = $220+
PANDescriptionCaroma Concorde Toilet Pan Concealed S OR P Trap White (4*)
WELSRating: 3 Star Rating Measure: 4.5/3,3.3 Average Ltrs Per Flush Measure: 4.5 Litres Per Full Flush Measure: 3 Litres Per Half Flush
MaterialPan Material: Vitreous China
CISTERNDescriptionUniset 2 Cistern Dual Flush 6/3 Universal Seat White (3*)SummaryCaroma Uniset II Connector CisternProduct InformationProduct Type: CisternFinishColour: WhiteMaterialMaterial: PlasticSize and DimensionsHeight: 877 mm | Width: 355 mm Length: 150 mm
Caroma Concorde Uniset II Toilet Suite
Supply and Install Toilet Suites
TOILET SUITES
Product Sell Price: $575+
the pan with top fixing bolts (supplied) Pan outlet Type: P Trap/S Trap using conversion bend (supplied) Pan Fixing: Screwed to floor using fixing brackets (supplied) and bedded with sealant Toilet Button Type: Dual Flush Water Inlet Position: Back Inlet
Size and Dimensions: Height: 850mm Pan Height: 400mm Projection: 660mm P Trap Setout: 180mm S Trap Max Setout: 185mm S Trap Min Setout: 95mm Weight of Cistern: 12.5kg Weight of Pan: 27kg
Description: Posh Solus Square Close Coupled Back to Wall Back Inlet Toilet Suite S&P Trap with Soft Close Quick Release Seat White/ Chrome (4 *)
Product Information Cistern Type: Close Coupled Back to Wall Recommended Use: Domestic, Hotel and Commercial Rim Configuration: Box Rim Toilet Seat: Soft Close Quick Release
Material Cistern Material: Vitreous China Pan Material: Vitreous China Finish: Toilet suite colour – White Cistern Fixing: Cistern bolts directly to
Posh Solus Back-to-Wall Toilet Suite
Inclusions• To remove old to client/tenant’s bin only
• To test thoroughly and provide before and after photo’s
• NOTE: Painting of wall may be necessary on completion as existing cistern may be larger than the new one. This will incur additional costs if necessary.
• NOTE: Whilst we take the utmost care in removing the existing toilet there are rare occasions that are out of our control where the tiles/lino may be lifted in which will be charged as extra to make good
Additional Extras • NOTE: if a non-standard scenario is encountered (eg. Moving to a rear entry water supply etc. then this
will be quoted upon arrival)
• If cement base required, an extra $50+ will be chargeable for cement/mortar (no quick-set product such as jetcrete is to be used as it has potential to crack the pan)
• If a replacement flexible hose is required, an extra $15+ will be added
• If a replacement cold water isolation is required, an extra $25+ will be added
• If an offset pan adaptor is required, an extra $30+ will be added
Want to supply your own? • To change over like-for-like client supplied toilet suite with silicone base = $220+
Supply and Install Toilet Suites
TOILET SUITES
Warranty:Domestic Use: 10 years Commercial Use: 12 years Spare Parts and Labour: 12 Months
50 51
Product Sell Price:$750+
Product Sell Price: $280+
WELSRating: 4 Star Rating Measure: 4.5/3 3.3 Average Ltrs Per Flush
SummaryBase Low Level Cistern
Product InformationProduct Type: Cistern
FinishColour: White
Base Cistern
Inclusions• NOTE: Painting of wall may be necessary on completion as existing cistern may be larger than the new
one. This will incur additional costs if necessary.
• To test thoroughly and provide before and after photo’s
Additional Extras • If a replacement flexible hose is required, an extra $15+ will be added
• If a replacement cold water isolation is required, an extra $25+ will be added
• To supply and install 2 x Base Toilet cisterns = $500+
Want to supply your own? • To change over client supplied like-for-like toilet cistern = $150+gst
Inclusions• To remove old to client/tenant’s bin only
• To test thoroughly and provide before and after photo’s
• NOTE: Painting of wall may be necessary on completion as existing cistern may be larger than the new one. This will incur additional costs if necessary.
• NOTE: Whilst we take the utmost care in removing the existing toilet there are rare occasions that are out of our control where the tiles/lino may be lifted in which will be charged as extra to make good
Additional Extras • NOTE: if a non-standard scenario is encountered (eg. Moving to a rear entry water supply etc. then this
will be quoted upon arrival)
• If cement base required, an extra $50+ will be chargeable for cement/mortar (no quick-set product such as jetcrete is to be used as it has potential to crack the pan)
• If a replacement flexible hose is required, an extra $15+ will be added
• If a replacement cold water isolation is required, an extra $25+ will be added
• If an offset pan adaptor is required, an extra $30+ will be added
Want to supply your own? • To change over like-for-like client supplied toilet suite with silicone base = $220+
Pan Fixing: Screwed to the floor using brackets (supplied) and bedded with sealant Water Inlet Position: Bottom Inlet (Reversible right or left)Size and DimensionsHeight: 835 mm | Projection: 680 mm S Trap Min Setout: 140 mm S Trap Max Setout: 270 mm P Trap Setout: 190 mm | an Height: 400 mm Weight of Cistern: 13 kg | Weight of Pan: 34 kgWarrantyWarranty — Domestic Use: 7 Years Spare Parts and Labour: 12 MonthsWELSRating: 4 Star Rating Measure: 4.5/3 3.5 Average Ltrs Per Flush Measure: 4.5 Litres Per Full Flush Measure: 3 Litres Per Half Flush
Product InformationTrend: Day Spa Recommended Use: Domestic, hotel and commercial Inlet Availability: Also available in Back Rim Configuration: Box Rim Toilet Seat: Soft Close Quick ReleaseFinishToilet Suite Colour: WhiteMaterialCistern Material: Vitreous China Pan Material: Vitreous China Toilet Seat Material: Polypropylene (PP) Technical Information Cistern Fixing: Bolted directly to pan Inlet Valve Recommended Max Pressure: 500 kPa Outlet Type: P Trap/S Trap using conversion bend (supplied)
Cygnet Close Coupled Back-To-Wall Toilet Suite
Supply and Install Toilet Cisterns
Supply and Install Toilet Cisterns
TOILET SUITESTOILET SUITES
DescriptionAmerican Standard Cygnet Close Coupled Back to Wall Bottom Inlet Toilet Suite with a Soft Close Quick Release White Seat (4*)
52
Product Sell Price: $330+
MaterialMaterial: Plastic
Size and DimensionsHeight: 877 mm | Width: 355 mm Length: 150 mm
WELSRating: 3 Star Rating Measure: 6/3,3.6 Average Ltrs Per Flush Measure: 6 Litres Per Full Flush Measure: 3 Litres Per Half Flush
DescriptionUniset 2 Cistern Dual Flush 6/3 Universal Seat White (3*)
SummaryCaroma Uniset II Connector Cistern
Product InformationProduct Type: Cistern
FinishColour: White
Inclusions• NOTE: Painting of wall may be necessary on completion as existing cistern may be larger
than the new one. This will incur additional costs if necessary.
• To test thoroughly and provide before and after photo’s
Additional Extras • To supply and install Caroma Uniset ivory cistern = $380+
• If a replacement flexible hose is required, an extra $15+ will be added
• If a replacement cold water isolation is required, an extra $25+ will be added
• To supply and install 2 x Caroma Uniset Toilet cisterns = $600+
Want to supply your own?• To change over client supplied like-for-like toilet cistern = $150+
Caroma Uniset Cistern
Supply and Install Toilet Cisterns
TOILET SUITES
53
Product Sell Price: from $700+
DescriptionMelamine Vanity Unit (610) 2 Door 610 x 470mm White
Product InformationBowl Type: Single Bowl Bowl Configuration: Centre Bowl Door and Drawer Configuration: Door Only Mounting: Floor Standing Number of Doors: 2 Doors Product Shape: Oval Handle Type: Flat D 96mm Bright Chrome
FinishColour: White Benchtop Colour: White Colour Variations (Prices May Vary): White, Almond Ivory
MaterialDrawer Runner Material: Metal Hinge Material: Metal Interior Cabinet Material: Moisture Resistant Melamine Board
Size and DimensionsHeight: 790 mm | Width: 470 mm| Length: 610 mm | Vanity Kick: 140 mm
Inclusions • Measure the width of the vanity and identify whether it is freestanding or hob-mounted
• To install only like-for-like single vanity basin and existing tapware NOTE: This does not include supply of tapware, isolation valves or P+W. However, does include new waste piping
• To remove all rubbish to client/tenant’s bin only
• To test thoroughly and provide before and after photo’s
Additional Extras • NOTE: Whilst we take the utmost care in removing the existing vanity such things as tiles, flooring, plaster,
brickwork and paint etc. may be brittle and extras maybe incurred for any patching that potentially may be required on completion.
• To supply and install basin set/basin mixer add an extra $150+
• To supply and install P+W add an extra $50+
• To supply and install 2 x standard mini-stops add an extra $50+
• NOTE: NO DRAWERS — $50+ to add 3x drawers
• Want to bring your own? To change over like-for-like client supplied vanity unit = $350+ NOTE: This does not include supply of tapware, isolation valves or P+W. However does include supply and install of new waste piping.
VANITIES
Supply and Install Base Vanities
VANITY UNITS 610, 760 & 910
WarrantyWarranty — Domestic Use: 12 Months Spare Parts and Labour: 12 Months
Product may not appear 100% the same as image displayed – enquire directly for the most suitable vanity for your application
54 55
BATHS
Supply and Install Baths
FinishColour: White
MaterialMaterial: Fibreglass Reinforced Acrylic
Technical InformationWaste Position: End
Size and DimensionsHeight: 399 mm | Width: 755 mm Length: 1675 mm Capacity: 210 ltr | Height of Lip: 42 mm Internal Depth: 395 mm Waste Size: 40 mm Weight: 18 kg
DescriptionPosh Solus MKII Bath 1675 x 755mm White
Product InformationProduct Shape: Rectangular Plug and Waste: Sold Separately
SummaryPosh is all about comfortable, practical bathroom products that everyone in the home can enjoy. Designed to stand the rigours of modern living, the Posh Solus MKII 1675 Rectangle Bath will help your family get more out of every day.
Product Sell Price: $850+
Inclusions• Measure the width of the bath and identify whether it is freestanding or in-built
• To supply and install in-built bath and client supplied tapware on sand/cement base including timber batons NOTE: This does not include supply of tapware or P+W
• NOTE: This allowance is for a bath to be installed without any major modifications to waste pipe, adjustments to unsquared walls or incorrect sizing of bath. These works can include; jackhammering and removing of concrete to align bath waste, reinforcing weak walls, recessing bath into wall and pre-existing blockages. Should we encounter any of the above it will be quoted onsite by one of our team
• NOTE: Whilst we take the utmost care in removing the existing bath such things as tiles, flooring, plaster, sheeting, brickwork and paint etc. may be brittle and extras maybe incurred for any patching that potentially may be required on completion.
• To remove all rubbish to client/tenant’s bin only (see bath removal costs below)
• To test thoroughly and provide before and after photo’s
• Please ensure tenant/client has left work area tidy prior to us attending
Additional Extras • To remove bath from site; cast iron $120+, pressed steel $80+, fiber glass $60+
• To supply and install Posh Bristol bath set add an extra $150+
• To supply and install mixer tap – see page on mixers
• To supply and install Base P+W add an extra $50+
• No allowance for asbestos removal or any other hazardous material that may be revealed upon removal of existing bath
Posh Solus MKII Bath 1675 X 755mm White
Product Sell Price: $350+
Vanity Basin
Inclusions• To supply and install Vanity Basin and existing OR client supplied like-for-like tapware
with white/clear silicone finish
NOTE: This does not include supply of tapware, isolation valves or plug and waste
• To remove all rubbish to client/tenant’s bin only
• To test thoroughly and provide before and after photo’s
Additional Extras • To supply and install Posh Bristol basin set/Base basin mixer add an extra $150+
• To supply and install Base P+W add an extra $50+
• To supply and install 2 x standard mini-stops add an extra $50+
*** Can give $50 discount to perform 2 x basin installations in one visit.
DescriptionRecessed Vanity Basin
Product InformationTrend: Neo Classic Recommended Use: Domestic, hotel and commercial Overflow Configuration: No Integrated Overflow Taphole Configuration: 1 Taphole Taphole Availability: 1 or 3 Tapholes Tapware: Sold Separately
FinishColour: White
MaterialMaterial: Vitreous China
Technical InformationFixing: Counter top self-rimming. (Fixing clips supplied)
Size and DimensionsWidth: 425 mm | Length: 555 mm Capacity: 7 ltr | Waste Size: 40 mm Weight: 7 kg
WarrantyWarranty — Domestic Use: 7 Years Spare Parts and Labour: 12 Months
Supply and Install Basins
BASINS
Weight of Bath Filled: 218.00 kg Other Size Options: 1520mm
WarrantyWarranty — Domestic Use: 10 Years Replacement Warranty: 10 Years Spare Parts and Labour: 12 Months
*Product may not appear 100% the same as image displayed.
56 57
Product Sell Price: $1,200+
Inclusions • Manometer test houses gas line
NOTE: If a gas leak is present, entire job will be charged at time and materials
• Disconnect existing gas appliance
• Install and connect new gas appliance
• Test gas appliance and instruct client how to operate
• Clean up any job-related rubbish/debris to client/tenant’s bin only
• To commission and submit compliance paperwork to local authority
• Remove all rubbish and appliances that have been altered by tradesman from site and dispose of accordingly.
Additional Extras• Identify unsatisfactory compliance items due to recent updates in the Australian Standards
(Regulator must be accessible; flex hose cannot penetrate cupboards — these extras will all quoted on-site should they be required)
• Trim cabinetry to fit new appliance add an extra $25+ NOTE: Adding cabinetry not included and will be referred to our handyman/cabinet maker)
• If there is no existing gas oven present, then an on-site quotation will be required
• If unit is hardwired, electrical = $180+
Want to bring your own?• To change over client supplied like-for-like gas oven = $220+
FunctionsNumber of Programs: 4 Programs Conventional Traditional bake Fan grill Fan bake
Other FeaturesOven Type: Single Oven Timer Functions: Yes Grill location: Integrated electric grill Control type: Dial Cooling fan Fan assisted Closed door electric grill Electronic ignition Triple glass door with full glass inner door
Key SpecificationsFinish Colour: Stainless Steel Height (mm): 590 mm Oven Fuel Type: Natural Gas Width (mm): 597 mm Oven Volume: 69 Litres Depth (mm): 567 mm Volume — One Compartment (Net): 69 Litres
Warranty2 Years. Warranty Note: Parts and labour
Accessories included: LPG conversion kits included — Must be converted by a licensed plumber, 2 wire racks, Grill tray with rack, LPG Conversion kit, Removable oven side racks
Emilia 60cm NG Built in Oven
Supply and Install Gas Ovens
KITCHEN
Kitchen
Removable inner glass for cleaning Manual timer Grill tray with rack LPG Conversion kit Removable oven side racks
*subject to confirmation at time of purchase*
58 59
KITCHENKITCHEN
Supply and Install Gas Cooktops
Supply and Install Gas Ovens
Product Sell Price: $1,350+
Inclusions • Manometer test houses gas line
NOTE: If a gas leak is present, entire job will be charged at time and materials
• Disconnect existing gas appliance
• Install and connect new gas appliance
• Test gas appliance and instruct client how to operate
• Clean up any job-related rubbish/debris to client/tenant’s bin only
• To commission and submit compliance paperwork to local authority
• Remove all rubbish and appliances that have been altered by tradesman from site and dispose of accordingly.
Additional Extras• Identify unsatisfactory compliance items due to recent updates in the Australian Standards
(Regulator must be accessible; flex hose cannot penetrate cupboards — these extras will all quoted on-site should they be required)
• Trim cabinetry to fit new appliance add an extra $25+ NOTE: Adding cabinetry not included and will be referred to our handyman/cabinet maker)
• If unit is hardwired, electrical = $180+
• If there is no existing gas oven present, then an on-site quotation will be required
Want to bring your own?• To change over client supplied like-for-like gas oven = $220+
Defrost Keep warm Traditional bake Fan grill Fan bake
Other FeaturesOven Type: Single Oven Grill location: Integrated electric grill Control type: Control knob Cooling fan
FeaturesDouble glazed oven door Timer Integrated grill Connection load: 2.3 KW Auto off function
Key SpecificationsFinish Colour: Stainless Steel Height (mm): 595 mm Oven Fuel Type: Natural Gas Width (mm): 596 mm Oven Volume: 80 Litres Depth (mm): 568 mm Volume — One Compartment (Net): 72 Litres
Warranty2 Years (Parts and labour)
Accessories includedGrill/oven pan, Grill insert, Baking tray, Side racks, 2x Chromed wired shelf
FunctionsNumber of Programs: 5 Programs
Westinghouse 60cm NG Built in Oven — WVG613S
*subject to confirmation at time of purchase*
Product Sell Price: $700+
Inclusions • Manometer test houses gas line
NOTE: If a gas leak is present, entire job will be charged at time and materials
• Disconnect existing gas appliance
• Install and connect new gas appliance
• Test gas appliance and instruct client how to operate
• Clean up any job-related rubbish/debris and old cooktop to client/tenant’s bin only
• To commission and submit compliance paperwork to local authority
Additional Extras• Identify unsatisfactory compliance items due to recent updates in the Australian Standards
(Regulator must be accessible; flex hose cannot penetrate cupboards — these extras will all quoted on-site should they be required)
• Trim benchtop to fit new appliance add an extra $25+ NOTE: Adding cabinetry not included and will be referred to our handyman/cabinet maker)
• Supply and install single 10-amp power point for gas appliance ignition (if no safety switch installed at electrical switch board, it is against regulations to have a new power point installed) Subject to site inspection – add an extra $250+
• Stainless Steel option = additional $50+
Want to bring your own?• To change over client supplied like-for-like gas cooktop = $220+
Burner SpecificationsIgnition: Push Button
Other FeaturesControl type: Control knob LP conversion kit included Flame failure Enamel cooktop trivets Stylish stainless steel finish Side control Flat trivet pot support design Battery cooktop ignition
Energy RatingSmall burner 5.1 Mj/h Medium burner 2 x 9.0 Mj/h Wok burner 14.4 Mj/h
Key Specifications Cooktop Fuel Type: Gas Finish Colour: White Height (mm): 55 mm Width (mm): 600 mm Depth (mm): 535 mm Warranty: 2 YearsCut OutCut Out Width: 570 mm Cut Out Depth: 490 mm
BurnersTrivets: Enamel Cooktop Burners: 4 Burners Wok Burner
Chef 60cm NG Cooktop
*subject to confirmation at time of purchase*
60 61
Product Sell Price: $1,150+
Product Sell Price: $700+
Inclusions • Manometer test consumer gas line
NOTE: If a gas leak is present, entire job will be charged at time & materials• Disconnect existing gas appliance• Install and connect new gas appliance including installation of regulator provided with gas appliance• Adjust legs to ensure upright stove is level and finished height is 10mm above bench-top height for compliance• Test gas appliance and instruct client how to operate• Clean up any job-related rubbish/debris to client/tenant’s bin only• Submit compliance paperwork to local gas authority• Remove all rubbish to tenant/clients bin only • Electrical ignition
NOTE: this requires a power point to be installed by an electrician if one is not already present
Additional Extras• Removal of uprights from site $60+• If the existing gas line penetrates the wall higher than the new appliance inlet connection, a shepherd’s hook
is required and an extra $50+ will be added• If the existing connection is coming from coming from the floor and additional work is required to recess the
gas line OR to slightly re-run the gas line, extras will be quoted onsite prior to commencing• Supply and install single 10-amp power point for gas appliance ignition (if no safety switch installed at electrical
switch board, it is against regulations to have a new power point installed). Subject to electrical inspection
Want to bring your own?• To change over like-for-like client supplied all gas upright stove = $250+gst
Other Features: Control type: Control knobsGrill location: Separate electric grillOven Type: Upright Oven/StoveNumber of shelf positions: 5
Warranty: Manufacturer Warranty: 2 YearsWarranty Note: Domestic warranty on all parts and labour with in-home serviceUse: Not intended or designed for commercial use.
Key SpecificationsBrand: HaierModel Number: HOR54B5MGW1Finish Colour: WhiteHeight (mm): 900 mmWidth (mm): 540 mmDepth (mm): 600 mmOven Fuel Type: Natural GasOven Volume: 60 LitresCooktop Type: Gas burnersCooktop Fuel Type: GasAccessories included: 2 x Wire racks, 1 x Grill tray, 1 x Grill insert, 1 x 60mm Mini splashback and 1 x LPG conversion kit
Haier 54cm NG Upright Cooker
Inclusions • Manometer test houses gas line
NOTE: If a gas leak is present, entire job will be charged at time and materials
• Disconnect existing gas appliance
• Install and connect new gas appliance
• Test gas appliance and instruct client how to operate
• Clean up any job-related rubbish/debris and old cooktop to client/tenant’s bin only
• To commission and submit compliance paperwork to local authority
Additional Extras• Identify unsatisfactory compliance items due to recent updates in the Australian Standards
(Regulator must be accessible; flex hose cannot penetrate cupboards — these extras will all quoted on-site should they be required)
• Trim benchtop to fit new appliance add an extra $25+ NOTE: Adding cabinetry not included and will be referred to our handyman/cabinet maker)
• If there is no existing gas cooktop present, then an on-site quotation will be required
• Supply and install single 10-amp power point for gas appliance ignition (if no safety switch installed at electrical switch board, it is against regulations to have a new power point installed) Subject to site inspection – add an extra $250+
Want to bring your own?• To change over client supplied like-for-like gas cooktops = $220+
BurnersTrivets: Cast Iron Cooktop Burners: 4 Burners Wok Burner
Burner SpecificationsIgnition: Electronic Other Features Control type: Control knob Finish Colour Description: Stainless steel with painted silver control knobs
Features: FamilySafe trivets High-powered 14.4 MJ/h, triple-ring wok burner LPG conversion kit included — Must be converted by a licensed plumber
Key Specifications Cooktop Fuel Type: Gas Finish Colour: Stainless Steel Height (mm): 45 mm Width (mm): 600 mm Depth (mm): 520 mm Warranty: 2 Years Warranty Note: A 2-year domestic warranty with in-home service. Accessories included: 1 x LPG conversion kit, 2 x cast iron trivets and 1 x wok trivet
Cut OutCut Out Width: 570 mm Cut Out Depth: 490 mm
Westinghouse 60cm NG Cooktop
KITCHENKITCHEN
Supply and Install Gas Upright Stoves
Supply and Install Gas Cooktops
*subject to confirmation at time of purchase**subject to confirmation at time of purchase*
62 63
Product Sell Price: $1,700+
Product Sell Price: $1,060+
Inclusions • Manometer test consumer gas line
NOTE: If a gas leak is present, entire job will be charged at time & materials
• Disconnect existing gas appliance
• Install and connect new gas appliance including installation of regulator provided with gas appliance
• Adjust legs to ensure upright stove is level and finished height is 10mm above bench-top height for compliance
• Test gas appliance and instruct client how to operate
• Clean up any job-related rubbish/debris to client/tenant’s bin only
• Submit compliance paperwork to local gas authority
• Remove all rubbish to tenant/clients bin only Additional Extras• Removal of uprights from site $60+
• If the existing gas line penetrates the wall higher than the new appliance inlet connection, a shepherd’s hook is required and an extra $50+ will be added
• If the existing connection is coming from coming from the floor and additional work is required to recess the gas line OR to slightly re-run the gas line, extras will be quoted onsite prior to commencing
• Supply and install single 10-amp power point for gas appliance ignition (if no safety switch installed at electrical switch board, it is against regulations to have a new power point installed). Subject to electrical inspection
Want to bring your own?• To change over like-for-like client supplied all gas upright stove = $250+gst
Ignition: Electronic
FunctionsNumber of Programs: 1 Programs Conventional Fan bake
Other FeaturesOven Type: Upright Oven/Stove Timer Functions: 2-hour mechanical timer Grill location: Separate gas grill Control type: Control knob Number of shelf positions: 5 Finish Colour Description: Mark-resistant stainless steel exterior and a pyrolux, high temperature enamel interior
Features1 x 25 Watt oven light
Key SpecificationsFinish Colour: Stainless Steel Oven Fuel Type: Natural Gas Cooktop Type: Gas burners Height (mm): 916 mm Width (mm): 596 mm Oven Volume: 80 Litres Depth (mm): 632 mm Warranty: 2 Year domestic warranty on all parts and labour with in home service Accessories included: 2 x Oven wire racks and 1 x grill and insert
BurnersTrivets: Cast Iron Cooktop Burners: 4 Burners
Burner SpecificationsBurner Material: Cast Iron
Westinghouse 60cm NG Stove/Oven
Inclusions • Manometer test consumer gas line
NOTE: If a gas leak is present, entire job will be charged at time & materials
• Disconnect existing gas appliance
• Install and connect new gas appliance including installation of regulator provided with gas appliance
• Adjust legs to ensure upright stove is level and finished height is 10mm above bench-top height for compliance
• Test gas appliance and instruct client how to operate
• Clean up any job-related rubbish/debris to client/tenant’s bin only
• Submit compliance paperwork to local gas authority
• Remove all rubbish to tenant/clients bin only Additional Extras• Removal of uprights from site $60+
• If the existing gas line penetrates the wall higher than the new appliance inlet connection, a shepherd’s hook is required and an extra $50+ will be added
• If the existing connection is coming from coming from the floor and additional work is required to recess the gas line OR to slightly re-run the gas line, extras will be quoted onsite prior to commencing
• Supply and install single 10-amp power point for gas appliance ignition (if no safety switch installed at electrical switch board, it is against regulations to have a new power point installed). Subject to electrical inspection
Want to bring your own?• To change over like-for-like client supplied all gas upright stove = $250+gst
Optional Accessory: VPK543 Vermin Proof Kit Other Features:Oven Type: Upright Oven/Stove Control type: Control knob
Key Specifications Brand: ChefModel Number: CFG503WBNG Finish Colour: WhiteHeight (mm): 910 mmOven Fuel Type: Natural GasCooktop Type: Gas Width (mm): 540 mmDepth (mm): 635 mmWarranty: 2 YearsWarranty Note: A 2-year domestic warranty on all parts and labour with in home service
Chef 54cm NG Upright Cooker
KITCHENKITCHEN
Supply and Install Gas Upright Stoves
Supply and Install Gas Upright Stoves
*subject to confirmation at time of purchase* *subject to confirmation at time of purchase*
2 x shelves Easy-clean oven Easy clean formed shelf supports 120-minute mechanical timer Anti-tilt plate Telescopic grill runner
64 65
Product Sell Price: $680+
Inclusions • Disconnect existing dishwasher (if applicable)
• Position new dishwasher in suitable space provided
• Connect cold water line (using only hose supplied with dishwasher) to existing cold water dishwasher connection
• Connect drain outlet (using only hose supplied with dishwasher) to existing kitchen sink trap spigot
• Plug in power lead to existing 10 amp power point (using only lead supplied with dishwasher)
• Set-up dishwasher feet to maximum height and level accordingly
• Install kickboard supplied with dishwasher (if applicable)
• Test dishwasher and show client how to operate
• Clean up any job related debris – new dishwasher box removed to client/tenants bin only
Additional Extras• Supply and install 2-way water diversion valve (combi valve) = $50+
• Supply and install drain extension hose = $50+
• Supply and install suitable kitchen sink trap with dishwasher drain spigot = $30+
• Remove existing appliance from site = $60+
Want to bring your own?• To change over like-for-like client supplied dishwasher = $150+
DescriptionWhite / Stainless steel 13 Place Setting
Key Features Electronic, Sensor Touch LED control panel, Delay start function (1-24 hours)
DimensionsH 850 x W 598 x D 598
Warranty2 year warranty WARRANTY CARD SAVED AS PDF
HAIER HDW13G1W
Supply and Install Dishwasher
KITCHEN
*subject to confirmation at time of purchase*
6766
INSTALL ONLYInstallation through cupboards = $220+
• Position, install and plug fridge in to existing 10 amp power point in suitable location
• Supply and install 2 way water diversion/isolation valve (combi-valve) for fridges water supply
• Install a new water line using white tubing and filter supplied with new fridge through cupboards up to 8 meters from newly installed water isolation valve
• Remove all air from newly installed water line and test for leaks
• Test fridge and all its functions and show customer how to operate
• Clean up any job related debris
• If a pressure limiting valve is required an additional $80+ will be charged for supply and install of new valve
Installation through roof space = $280+
• Position, install and plug fridge in to existing 10-amp power point in suitable location
• Supply and install inline quick connect plastic isolation valve behind fridge.
• Install new water line and filter (supplied by fridge manufacturer)
• Tee into existing cold-water line in roof space within 5m of fridge cavity and run new water line back to fridge using white tubing and filter supplied with new fridge.
• It is assumed you have cupboards/recess above your fridge to run the new water line. Extras will apply if the piping is required to be chased into the wall OR run in the cavity
• Remove all air from newly installed water line and test for leaks
• Test fridge and all its functions and show customer how to operate
• Clean up any job-related debris
• If a pressure limiting valve is required an additional $80+ will be charged for supply and install of new valve
NOTE: Double story houses and irregular set ups will require a quote on site
KITCHEN
Fridge Ice and Water Installation
Product Sell Price: $1,350+
Inclusions • Disconnect existing dishwasher (if applicable)
• Position new dishwasher in suitable space provided
• Connect cold water line (using only hose supplied with dishwasher) to existing cold water dishwasher connection
• Connect drain outlet (using only hose supplied with dishwasher) to existing kitchen sink trap spigot
• Plug in power lead to existing 10 amp power point (using only lead supplied with dishwasher)
• Set-up dishwasher feet to maximum height and level accordingly
• Install kickboard supplied with dishwasher (if applicable)
• Test dishwasher and show client how to operate
• Clean up any job related debris – new dishwasher box removed to client/tenants bin only
Additional Extras• Supply and install 2-way water diversion valve (combi valve) = $50+
• Supply and install drain extension hose = $50+
• Supply and install suitable kitchen sink trap with dishwasher drain spigot = $30+
• Remove existing appliance from site = $60+
Want to bring your own?• To change over like-for-like client supplied dishwasher = $150+
* Colour subject to availability
Key FeaturesVarioSpeed: Up to 50% faster wash programs without sacrificing wash and drying results
HydroSafe: 24 hour anti-flood protection, guaranteed
Warranty5 year warranty
SIEMENS iQ500 White Finish Freestanding 60 cm Dishwasher
KITCHEN
Supply and Install Dishwasher
*subject to confirmation at time of purchase*
1/2
iQ500SN26M231AUwhite finishfreestanding 60 cm dishwasher
✓ varioSpeed: Up to 50% faster wash programs without sacrificingwash and drying results
✓ hydroSafe: 24 hour anti-flood protection, guaranteed.
Features
Technical Data
Water consumption (l) : 11.0Built-in / Free-standing : Free-standingHeight of removable worktop (mm) : 815Depth with open door 90 degree (mm) : 1155Adjustable feet : Yes - front onlyMaximum adjustability feet (mm) : 20Net weight (kg) : 48.0Gross weight (kg) : 50.0Connection Rating (W) : 2400Current (A) : 10Voltage (V) : 220-240Frequency (Hz) : 50; 60Length electrical supply cord (cm) : 175Plug type : AU plugLength inlet hose (cm) : 165Length outlet hose (cm) : 190EAN code : 4242003692912Number of place settings : 14Energy consumption (kWh) : 0.60Reference programme : EcoTotal cycle time of reference programme (min) : 180Noise level (dB) : 46Installation typology : Built-under
'!2E20AD-gjcjbc!
Optional accessories
SZ73300 Wineglass-TraySZ73001 Silver polishing cassetteSZ72010 inlet and outlet hose extention 2 m
Manufactured by <BSH Legal Name> under Trademark License of Siemens AG
6968
KITCHEN
Filtration Systems
PURE-TECH TWIN UNDER SINK FILTER SYSTEM• Sediment, dirt, rust and other particles filtered down
to 0.5 micron
• Taste, odour, chlorine and other chemicals are absorbed by the carbon block technology.
• Has a stand-alone filter tap
To supply and install = $550+GST
EXTRAS • Should your system require a pressure reduction
valve add an extra = $80+GST
• Should a flexible hose connector be required add an extra =$15+GST (each)
• Drilling through stainless sink or timber benchtop only.
PURE-TECH SINGLE IN-LINE WATER FILTER• Sediment, dirt, rust and other particles filtered down
to 0.5 micron
• Taste, odour, chlorine and other chemicals are absorbed by the carbon block technology.
• No need for a stand-alone tap, filtered through the mixer tap
To supply and install = $380+GST
EXTRAS• Should your system require a pressure reduction
valve add = $80+GST
• Should a flexible hose connector be required add an extra =$15+GST
Filtration Systems
KITCHEN
DURA IN-LINE WATER FILTER
• Sediment, dirt, rust and other particles filtered down to 0.5 micron
• No need for stand-alone tap, filtered through the mixer tap
To supply and install = $275+GST
EXTRAS • Should your system require a pressure reduction valve add an
extra = $80+GST
• Includes 2 x flexible hoses
BACK-WASH INLINE WHOLE HOUSE FILTER• Removes all sediment and debris from the water line which
enters your houses mains
• Removes various chemicals from water line
• Lessens the hardness of the water system, this in turn would leave very scummy glass shower screens and white scale on tiles
• There is no need to install a kitchen filter as the water is already filtered
• There is no need to change the filter on the system, just a simple backwash which flushes and cleans the filter.
To supply and install = $750+GST
EXTRAS
• Should your meter not be in an easily accessible location – i.e pavers or concrete, this will be quoted as extra.
STEFANI TWIN UNDER SINK SYSTEM• 5-micron sediment pre filter removes dirt particles &
sediment with the sediment filter
• 5-micron carbon filter absorbs chlorine and odours and refines the taste of your water
To supply and install = $299+GST
EXTRAS • Should your system require a pressure reduction valve
add an extra = $80+GST
• Should a flexible hose connector be required add an extra =$15+GST (each)
• Drilling through stainless sink or timber benchtop only.
70
INSTALL ONLYStandard Canopy Change-Over/Installation = $250+
• Disconnect existing rangehood/exhaust fan (if applicable)
• Install and connect new canopy rangehood to existing power supply
• Test canopy rangehood and show customer how to operate
• Clean up any job related debris
• Send certificate of electrical safety to one nominated email address
Standard Fixed/Slide-Out Rangehood Change-Over = $110+
• Disconnect existing rangehood
• Install and connect new fixed/slide-out rangehood to existing power supply
• Test fixed/slide-out rangehood and show customer how to operate
• Clean up any job related debris
• Send certificate of electrical safety to one nominated email address
Duct Rangehood To Atmosphere = $350+ (OPTIONAL EXTRA)
• Install new 125mm flexible ducting up to 6 metres long into single story house
• Install new 125mm solid flue through tiled or tin single story roof
• Install new 125mm lead or dektite flashing and silicone seal accordingly
• Test for correct use
• Clean up any job related debris
KITCHEN
Scope of Works Rangehood Installation
737372
Drainage
IF YOU HAVE A BLOCKED DRAIN, DO NOT STRESS!
THE EXPERTS
Blocked Drains
Provided you halt running the shower, sink or toilet then your house is at no risk of flooding.
Most blockages are caused by 3 things.
A cracked sewer pipe — This generally shows up by retrieving roots from the drains.
Sanitary products — Please be very cautious of what you are flushing down your drains. All sanitary products should be placed in the bin and not down your toilet.
Hair — Shower and basin blockages are generally always caused by excess hair finding its way down the drain. This is most common in older homes that contain galvanized piping as the internals of the pipe rust away and cause the hair to get easily caught on the pipes walls.
DRAINAGE
HAND MACHINERYSmaller 40mm and 50mm drains such as shower, basins, laundry troughs and kitchen sinks are unblocked using a hand sani snake.
MECHANICAL MACHINERYThe majority of mains sewer blockages are unblocked using a drain machine. On the rare occasion we may be able to get away with using only a plunger on a gully or boundary IS (inspection shaft).
SEWER JETTERThis is the most effective form of drain clearing as it uses water to blast the lining of the drainage system, however it is also the most expensive. Plumbing Bros charge $250+ for the first hour and then $50+ per 15 minutes after the first hour (if required) for high pressure jetting.
High pressure jetting is best for kitchen blockages which are generally blocked with cooking grease, fats and oils. Using a hand sani snake or drain machine will usually unblock the drain, however the jetter is the only way to ensure a long term solution as it clears these substances completely from the walls of the piping.
7574
Blocked Drains Drain Replacement
DRAINAGEDRAINAGE
CAMERA INSPECTIONSWhenever roots are removed from a drain using machinery, a camera inspection should always take place as this generally means a cracked sewer. Once camera inspected we can locate the root intrusion points above ground using state-of-the-art locating equipment and proceed to quote for dig-up repairs.
• To fully camera inspect a free-flowing drain = $250+
NOTE: If we are required to unblock the drains prior to camera inspection, entire works will be charged at time and materials (camera hire = $120+)
• Once inspected with camera we can ascertain root intrusion point(s)/cracked sewer and provide written quote for required repairs to avoid on-going issues
• NOTE: We can only camera main 100-300mm sewer drains. Camera equipment does not fit down smaller 40mm + 50mm drains leading to showers, basins etc.
• NOTE: We camera inspect all accessible drains only. There are rare occasions where camera equipment cannot inspect past cracked piping and/or other various objects or minerals as it physically cannot go any further until rectified. On these rare occasions further inspection may be required once drainage is repaired/renewed
GULLY REPLACEMENT Gully Replacement = $650+
• To dig up damaged disconnector gully (DG) up to 1.2m deep below finished floor height
• NOTE: This allowance is for sand digging only, if gully is surrounded by concrete or any other miscellaneous material then additional costs will be quoted on site for removal and possible re-instatement on completion
• To cut and replace up to 3 entry pipes within 500mm only
• If entry pipes are damaged beyond 500mm then this will incur additional costs to be quoted on site
NOTE: We cannot physically see beyond the 500mm mark therefore cannot be held responsible for any future blockages that may occur outside the 500mm working zone of this gully. Entry pipes CANNOT be camera’d as they are too small.
• To install new disconnector gully in PVC pipe and replacing no more than 300mm of the main 100mm diameter drain
• To backfill sand only and re-pave if required
NOTE: Some pavers may be required to be cut to re-instate as best as possible. A professional paver may be required at client’s expense should our method not be acceptable
• To remove all rubbish to tenant/client’s bin only
• To test thoroughly and provide before and after photo’s
• NOTE: Unless main drains are camera’d then we cannot provide a professional report on the state of the remainder of the sewer system
SEWER CONVERSION Once a cracked or backfalling sewer established via a camera inspection, we are now required to dig up and repair. This will put a halt to on-going issues and potentially save you or your clients a very costly headache.
77
GENERAL MAINTENANCE
Tap Servicing Guide
7776
General Maintenance
PROCEDURE FOR BASIC TAP SERVICE• Remove tap handles and flanges to expose tap spindles
• Once tap spindles are removed fully unwind tap spindle from body, exposing rubber o-rings to tap spindles
• Remove o-rings and renew with new o-rings, applying thread sealant to o-rings
• With the spindle body cleaner, fully clean body removing any debris and old lubricant
• Once both these steps are completed screw tap spindle back into body and renew red body washer
• VERY IMPORTANT – With a torch check over seats to breach, should there be a crack present, re-seat using re-seating tool and making sure drill is NOT on hammer
• Once re-seated, flush lines, removing any shavings by cracking open water meter momentarily
• Re-check seats, once all OK use HYDRO-SEAL washers and re-insert spindles into breach
• Re-instate tap flanges and handles, turning on water and thoroughly test
• To fully service a standard tap set including changing of o-rings, body washers, tap washers and lubricant = $99 + gst
• Each additional standard tap set service add an extra $30+
• NOTE: If a breech requires re-seating add an extra $20+
CERAMIC DISC TAPWARE• Should we encounter leaking ceramic disc tap-ware, the first point of call is
to replace tap spindles. Due to the complexity of ceramic disc tap-ware, they are near impossible to service and Plumbing Bros will always recommend on replacement rather than service as it is not cost-effective to try service. 9 times out of 10 they are unable to be repaired.
RE-SEATING• The re-seating process involves a tool that is fitted to a battery drill that
cuts the damaged or faulty part of the seat. This tool is used to make the old cracked seat virtually brand new again. The larger the crack/groove in the seat the more time it will take to try and clean the seat, and more of an amount of the seat is required to be removed so that there are no more cracks left in seat. We are only able to re-seat a certain amount without going too far when not much of the seat is left, this is why all dripping taps should be fixed as soon as possible. In instances where the crack/groove has gone right through the seat, there is nothing that can be done to renew or repair seat and the breech will need to be replaced (refer to breech replacements), or Therm-Oz/Quoss tap-ware replacement quoted for.
78 79
GENERAL MAINTENANCE GENERAL MAINTENANCE
Shower LeaksTap Servicing Guide contd...
CHANGING OVER TAPWARE/SHOWER ROSE• Reasons for changing over tap-ware rather than servicing are due to the
following;
• Age and condition of tap-ware: Should the tap-ware be aged or worn, then the first point of call would be to replace rather than service. Aged tap-ware that is purely serviced generally encounters issues at a later date and the plumber will be held accountable for any call-backs.
• If tap-ware is seized and/or calcified and nothing can be done to service, then replacement will be necessary.
• Should any tap-ware with anti-vandal screws which cannot be removed due to corrosion, then tap handles will need to be angle-grinded off to remove, if this is the case client MUST be informed prior to starting.
• Should a shower rose be leaking then first point of call is replacement. Inform client and gain approval. REMOVE any restrictors from shower heads as these can cause issues with pressure and hot water.
Supplies to be Used• Hydro-Seal Brass Washers• Hydro-Seal Thread Lubricant• Hydro-Seal Tap Re-Seater (TUNGSTEN HEAD)• Tap Grease• Performa Body Washers• O-ring Kit• IN INSTANCES of water hammer please crimp the ends of the washers to
stop washer bouncing around OR use anti-hammer spring-loaded tap washers • White PTFE Tape
One of the most common jobs we come across on a day-to-day basis are leaks involving showers.
Apart from having the correct equipment on hand, the most crucial aspect to identifying and rectifying shower leaks is knowledge. From years and years of experience and know-how we have become leaders in resolving these hard to find nitty-gritty leaks.
The process to detecting the origin of these leaks is paramount. Upon investigating the shower recess and identifying a potential leak in the shower region, the very first step is to undergo a pressure test. To do this we remove the shower head and apply a water pressure gauge. This serves 2 purposes. The first is recognise any potential pressure drops between the shower taps and the shower rose. The second is to be able to remove all water flow from the shower so we can work in a dry environment for relevant testing.
Once the pressure gauge is fitted, open the taps all the way to simulate a real time showering process. Now remove the handles and flanges and visualise any potential leaks in and around the tapwares body and spindles (or cartridge in the case of a mixer tap). From experience we are able to rectify a large number of leaks from this process alone by identifying that a full tap service is required. Changing of body washers, o-rings, lubricant and tap washers will resolve the majority of leaks that have been visualised during this stage of the process.
Should the external plumbing appear in good condition, we now need to take a very close look at the grouting, tiles and waterproofing membrane. If any cracks are located in the tiling or grout we would then refer this on to our tiling division to quote for repairs, whether it be as simple as re-grouting or as in-depth as a full shower rebuild.
If the grouting appears to be in quality condition and has been ticked off by a professional then the process becomes slightly more difficult. We now have to rule out any leaks in the drainage waste pipe work. This is as simple as pouring drain dye down the shower waste to visualise whether the leak changes to the colour of the drain dye. The amount of time the dye is left to set will be determined on the size and severity of the water leak. For extra small leaks this sometimes is required to be left overnight.
• To fully pressure test 1 x shower = $150+
8180
GENERAL MAINTENANCE GENERAL MAINTENANCE
Backflow Prevention TestingShower Leaks contd...
The final step is to undertake a full leak detection process with the assistance of state-of-the-art machinery. Please note that this step can sometimes happen a lot sooner if there is a noticeable pressure drop in your gauges upon original pressure testing. It would also be a good idea to now explore your home insurance policy as one the rare occasion that it does get to this final step, it can become quite costly in demolition, repairs and reinstating. As a side note if you were ever considering a full bathroom renovation or make-over, now could also be the time to action these plans. This requires identifying the leak using an acute listening device or thermal imaging camera, removing a section of tiles, jackhammering the wall, repairing leak and then finally reinstating all back to its original form.
Once the leak is located and repaired, we would generally set you up with a new shower head and taps and you are as good as new.
BACK-FLOW PRICING AND CLAUSES• To fully test and commission a back-flow device including copies of regulatory
paperwork sent to client, water corporation and a copy kept on our data base
PRICE = $120+
• If whilst on site, there is an additional back-flow device which is required to be tested an additional $50+ will be added.
• Our kit is re-calibrated yearly as per Water Corp Regulations.
• Should the back-flow device be non-accessible, and we need to return to access an additional fee will be added to the job.
• Should any of the back-flow devices fail the test, an additional quote for repair/replacement will be sent to the client
• Our back-flow testing license is 5238
8382
GENERAL MAINTENANCE
Scope of Works Soak Wells
AUSTRALIA’S LEADING SOAKWELL, STORMWATER AND RAIN TANK EXPERTS!
PLASTIC MODULAR SOAK-WELL CLAUSES:To be quoted individually due to the uniqueness of each job.
• All rubbish removed to client/tenant’s bin only
• Whilst utmost care is taken excavating below ground, we cannot be held responsible for any services/pipework that are not visible or showing on ‘dial-before-you-dig’ plans
• NOTE: In most instances plastic modular soak wells are to be installed as 1 x to every downpipe, in such instances where as the roof is abnormal an on-site quote will be necessary
• Allowance for free hand digging of soft sand/soil only
• To supply and install 1 x plastic modular soak-well, geo-fab to suite, aggregate, (maximum of 4 x storm-water bends) and 1 x square finishing collar = $275+ PER DOWN-PIPE
• NOTE: In instances of excess sand left over, the sand will be spread evenly in client’s garden bed – no allowance for removal of sand from site
• If a compactor is required additional costs may be incurred – manual compacting is generally suffice
CONCRETE SOAK-WELL INSTALLS:To be quoted individually due to the uniqueness of each job.
• All rubbish removed to client/tenant’s bin only
• Whilst utmost care is taken excavating below ground, we cannot be held responsible for any services/pipework that are not visible or showing on ‘dial-before-you-dig’ plans
• NOTE: In instances of excess sand left over, the sand will be spread evenly in client’s garden bed – no allowance for removal of sand from site
• If a compactor is required additional costs may be incurred – manual compacting is generally suffice
• Price range of soak-well will vary dependant on size of well required
• Should the soak-well be in a trafficable location then additional costs will occur for trafficable lid supply and installation
• Should clients wish to have concrete soak-wells installed in a driveway as a collection pit then an on-site inspection will be required prior to quoting
• Concrete soak-well installation includes bedding of blue metal and geo-fab installed
EXCAVATOR HIRE CHARGES:• Size of excavator to be used will be determined by size of soak-wells
to be installed and size of job
GENERAL MAINTENANCE
Scope of Works Soak Wells contd...
8584
LEAK DETECTION
Leak Detection Process
THINGS HOME OWNERS CAN DO TO DETERMINE IF THEY HAVE A LEAK:Inside the home• Look in the kitchen, bathroom/s and laundry for dripping taps or leaking
washing machine and dishwasher connections. Damp patches on the walls may also indicate a leak.
• You can check your toilet cistern for leaks by placing a few drops of food colouring in the tank. Without flushing it, look for colouring in the toilet bowl. If it’s getting through, then you have a leak.
Outside the home• Look around your garden at: - Outdoor garden taps/hoses - Garden irrigation (including sprinklers) - Automatic solenoids and manual isolation valves - Exposed pipe work.
• Check your hot water systems and air conditioning units.
• Also look for damp and unstable brick paving and garden areas that may be moist and greener than expected.
HOW CAN I DETECT A LEAK?To conduct a leak detection test yourself, follow these simple steps:
1. Ensure no water is being used in your house (turn off all water appliances, such as washing machines and evaporative air conditioners).
2. Read the black and red numbers on your meter. Record the black numbers from left to right. The black numbers represent kilolitres (1,000 litres) and the red numbers represent litres.
3. If the dial is not visibly moving, take another reading after 15 minutes.
4. If the red numbers have changed, the test confirms there is a leak and further investigation is needed.
Leak Detection
8786
LEAK DETECTION LEAK DETECTION
Leak Detection Process contd...Leak Detection Process contd...
How bad is too bad?Once our trained technicians at Plumbing Bros.= identify and locate the burst pipe we not only repair the burst but will also advise on future replacement of hot and cold lines dependent on the condition of the copper. Copper over the years deteriorates in soil and therefore simply fixing a burst pipe will not always solve the issue long-term. Water and copper work in a way together that water pressure will always put strain on the next weakest point of the copper line, so once a burst is repaired another point of copper will be under strain and no doubt burst over time.
We will quote on Poly Plastic Pipe renewals and hot pipe lagging under-ground. This will fully solve any corrosion issues on your water line. These types of jobs will always be quoted from site dependent on the size and ran of water line PLUS the condition of the line.
TIMES WHEN YOU WILL NEED LEAK DETECTION:• Extremely Large Water Bills: If you receive a large water bill and you have no visual leaks
inside your house (i.e. leaking taps, toilets) then you may have a non-visible leak under-ground. This will be wasting large amounts of water and unless something is done, sometimes these leaks never become visual. This is where leak detection is used to pin-point the exact location of the leak. We can also submit a water loss form to the local water authority to gain some money back from your water bill.
• Can hear water resonating throughout the house but no visual leaks: On occasions clients will hear a “water running” noise. This would indicate a burst pipe somewhere in the house. Even though we can hear the noise in a certain spot, does not mean the leak is there. 9 times out of 10 the noise will be resonating from a totally different area of the house. Hence why you will require leak detection to pin-point the leak.
Leak Detection PricingUnfortunately, we are unable to give a fixed price on a leak detection job. As we cannot see the leak we cannot give a time frame on how long it will take to find, each job will be different.
Pricing will be at our standard rates as well as a one-off charge of $100 for the hire-age cost for the use leak detection machine.
So how does it work?Leaks have different frequencies made by the type of leak whether coming from pipes that are under greater pressure or from pipes that are under lower pressure and from the contents of these pipes. These leaks transmit a frequency that is picked up by the electronic leak detector and is applied while being transmitted through the machine. The amplified sounds that the leak is making is picked up by a us and the machine who is then able to pinpoint the location of the leak found.
8988
At Plumbing Bros we have fully qualified gas technicians should you ever encounter a situation where you can either small gas, have a gas leak or if ATCO have isolated your mains due to a leak. Finding a gas leak can be a time-consuming procedure, due to the fact we cannot physically see the leak we can-not give a time-frame on how long the leak will take to find. Therefore, we charge our standard rates when dealing with gas leaks unless stated otherwise.
Gas Leak Procedure• Remove gas “U-bend” and cap off gas up-right stand with brass cap
• Connect onto test nipple with either a digital manometer or water manometer, pumping the pressure to the gas system up to a minimum of 5Kpa
• For a minimum of 5 minutes test pressure. Should there be no visual drop in pressure then there is NO leak present. If after 5 minutes the pressure has dropped, this means there is a leak present somewhere on the gas line and it must be rectified before gas is turned on
• When a gas leak is present: Any visible joints such as nuts, isolation valves, fixtures such as bayonets and cooktops need to have soapy water applied. If a gas leak is present from one of these connections it will bubble and show up
• Should the previous step not show the gas leak the next step will be isolating each fixture separately and then testing the gas to see whether the appliance itself has an internal leak
• Failing the previous step, we will then (depending on where the gas line has been run) cap off different sections of the gas line, this will determine which section of the gas line is leaking and once found we will quote to renew a certain section OR repair leak if accessible
• Once a gas leak is repaired: Once a gas leak is repaired we will fully test the system, then purge all air from the line from the furthest fixture
• Re-light any hot water units and test all gas appliances to make sure all are working
• Fill out all regulatory gas paper-work and provide to client
GAS
Gas LeaksGas
*** On rare occasions where the gas line is not accessible to cap off and test, or on occasions where it would not be cost-effective to locate and repair the leak, we will advise the owner of the most cost-effective solution and quote accordingly. Should this be the case, the client will always be notified prior to proceeding with any works.
9190
Portable Gas Heaters (Bayonet Installs)
Portable Space Heater Servicing
GASGAS
Should a client have an old run down in-built space heater which they want to swap over for a portable space heater, we can install safe bayonet points with regulatory high and low vents, so clients can safely enjoy the heat.
Standard Gas Bayonet Install = $450+
• Tee off existing gas line no more than 2m from external wall (any distance further will be extra)
• Run down external wall and punch through installing spud at no more or no less than 5% of the ceiling height
• Supply and install gas bayonet
• Supply and install 1 x high and 1 x low vent
• NOTE: Whilst we take the utmost care in jackhammering walls and floors, unfortunately we cannot be responsible for any possible patch works that may be encountered due to brittle walls and floors etc.
• Re-test gas line and commission appliance
• Fill out regulatory gas paperwork and leave on site
NOTE: Any non-standard bayonet installs such as a two-story house or should the client want the gas line chased in an internal wall then this will be quoted from a site visit.
Do you own a gas heater?!Gas heaters are great for keeping warm, but they can be deadly if not maintained properly.
If gas heaters are faulty or poorly maintained, they can leak carbon monoxide. Carbon monoxide can be lethal as it can’t be seen and has no smell. It can cause death or chronic illness.
Carbon monoxide poisoning can happen in any home or building with gas heating appliances, including newer ones.
Keep your family safe this winter by arranging a gas heater service today with your local plumber/ gasfitter. Before you book, ask the gasfitter if they have the right equipment to test for carbon monoxide leakage.
Responsibilities for Landlords
• Ensure only licensed people do all gas-fitting and electrical work.
• Before re-letting, ensure all appliances are safe and any unsafe appliance is repaired or removed.
• Ensure all gas appliances, pipework and flue systems are maintained in a safe condition.
• Ensure all ventilation openings are clear and unobstructed.
• Ensure all pipes are sealed correctly if an appliance has been removed.
• Record all safety checks and details of work carried out on a gas or electrical installation.
• Flue systems must be examined regularly, especially those related to decorative gas log fires, internal hot water heaters and space heaters. Flue terminals must be checked to ensure they are not blocked and are vermin-proof.
• Burning or discolouration on the front or above a space or water heater indicates a problem and must be checked immediately.
• Air vents must not be blocked or covered.
• Piping systems should be checked every five years or whenever a new or replacement appliance is installed
Standard Service Procedure = $150+
All ‘Plumb Bros’ come fully equipped with gas servicing credentials, meaning we can assist with all gas appliance repairs.
• Clean all dust and debris from any internal fans and filters
• Test all visible gas joints for leaks
• Clean all pilot tube and burners
• Conduct a state of the art carbon-monoxide test to make sure heater is safe and functional
9392
HERE’S WHY WE STAND OUT FROM THE REST...We know when you are renovating, time is money. We undertake a commitment to you to be on time, and complete the job professionally.
We are happy to meet with you to help in the planning of the renovation — be it bathroom, kitchen or laundry etc. Our expertise will help you in creating a plumbing system to best suit your renovation. We can work in conjunction with the existing plans and may help to avoid any potential problems down the track. We utilise the latest tools, products and techniques to ensure your renovation is a fluid process.
Your scheduling and budgeting is foremost in our considerations, and our expert team has the experience to ensure your renovations runs as smoothly as possible.
RENOVATIONS
Second to None...Renovations
OUR POINTS OF DIFFERENCE:
• State of the art renovation equipment
• 30 + years of renovation experience
• We are partnered with a bathroom/kitchen renovation company
• Quality of final product is second to none
• Variety of range of products, ranging from entry level to high level fixtures
• Industry leaders in bathroom and kitchen renovations
• On-site brochure for range and viewing of products
• We will beat any quote from a licenced plumber by 10%
• Next day service, should we need to commence work on a major site
• Large and very cohesive team able to work on large projects
• Communication skills which are second to none in our industry
• We will always keep up to date with time scheduling and completion dates
• Due to our relationship with suppliers we are able to give THE best price on supplies to our clients
• Free quotes
• We are able to be contacted 24/7 for any advice, questions or job bookings
• National Buying Power
9594
HERE’S WHY WE STAND OUT FROM THE REST...Building your new home is stressful, with many important decisions to be made. Our commitment to you is to be dependable — on time, professional and reliable. We will help take the pressure off you, our years of experience and expertise will benefit you by ensuring a fluid process.
We utilise the latest products and techniques to ensure your building process is as smooth and cost efficient as possible.
Your scheduling and budgeting is foremost in our considerations, and our expert team has the experience to ensure the plumbing for your new home building runs to plan.
We only supply quality products that we are prepared to stand behind.
We guarantee you the best of customer service.
We use only state of the art tools and equipment.
NEW HOMES
Stress-free!New Homes
OUR POINTS OF DIFFERENCE:
• Fully equipped with all new home needs, including excavator
• 30+ years of new home experience including all building/council laws
• We work in conjunction with some of Australia’s most reputable building companies
• Our new home pricing is un-beatable
• We will beat any quote by 10%
• Next day service, should we need to commence work on a major site
• Large and very cohesive team able to work on large projects
• Communication skills which are second to none in our industry
• We will always keep up to date with time scheduling and completion dates
• Due to our relationship with suppliers we are able to give THE best price on supplies to our clients
• National Buying Power
9796
Commercial Kitchen Fitouts
HERE’S WHY WE STAND OUT FROM THE REST...We handle the stress for you. We work professionally with the outfitters to ensure a seamless finish to your commercial kitchen.
Our commitment to you is to be dependable – on time, professional and reliable.
We utilise the latest products and techniques to ensure your commercial kitchen fitout is as smooth and cost efficient as possible.
Your scheduling and budgeting is foremost in our considerations and our expert team has the experience to ensure the plumbing for your commercial kitchen fitout runs to plan.
CUSTOMISED MAINTENANCE PLANSWe can create and carry out maintenance and servicing schedules, to ensure no downtime when it counts, giving you maximum efficiency all year.
We only supply quality products that we are prepared to stand behind.
We guarantee you the best of customer service.
We use only state of the art tools and equipment.
COMMERCIAL KITCHEN FITOUTS
Commercial Kitchen Fitouts
OUR POINTS OF DIFFERENCE:
• Plumbing Bros has been providing commercial plumbing services to shopping centres, hotels, cafe’s, restaurants and office complexes, with 30+ years experience
• We are partnered with several commercial fit out companies
• We can install glass washers, steam ovens, commercial ovens, deep fryers + ANY commercial kitchen fixture
• We are partnered with suppliers such as Billie and Zip
• NO call out fee
• Free quotes
• National Buying Power
98 99
Grease Traps
Water Board Info:Retail food outlets such as restaurants, cafes and lunch bars produce greasy wastewater from food preparation and cleaning activities. The grease and fat contained in wastewater can accumulate both in your drains and our wastewater system, resulting in odorous and toxic gases, corrosion, blockages and wastewater overflows. Blockages and overflows impact the community and our ability to provide customers effective wastewater services. Under the Water Services Act 2012, all businesses involved in the retail food industry must obtain written permission in the form of a trade waste permit before discharging any waste into our wastewater system.
We are Australia’s leading grease trap installation company.We are local water authority approved. We ensure the requirements set out by the local water authority trade division are met, whilst still maintaining our quality workmanship.
We are happy to visit you onsite to assess your unique situation and give an accurate quote. We will restore your site upon job completion too. We only supply quality products that we are prepared to stand behind.
GREASE TRAPS
Grease Traps
All grease traps will require a site inspection and fixed price quotation provided.
100
We are passionate market leaders
in satisfying our customers’ needs
for plumbing solutions by delivering
only quality products and services,
along with value for money pricing
and every day superior
customer Service.
James Riddle CEO
Our Awards
We are proud recipients of multiple national and state-
based business awards...
plumbingbros.com.au
Your 5 Star Plumbers13000-5-STAR
ON-TIME PROMISE
7 DAY RATES
LIFETIME WARRANTY
TRIPLE CHECK
24/7 EMERGENCY