GENERATORS AUSTRALIA www.generatorsaustralia.com.au (08) 6258 4195 GENERAL ENGINE ALTERNATOR Model Power Type Prime Power (kW/kVA) Standby Power (kW/kVA) Engine Make and Model Engine Type Engine Prime Power (kW) Engine Standby Power (kW) Fuel Fuel Tank Capacity (L) Fuel Consumption (L/h) Fuel Injection Pressure MPa (kgf/cm 2 ) Coolant Capacity (L) Battery Type Combustion Type Bore (mm) x Stroke (mm) No. of Cylinders Displacement (L) Compression Ratio Steady Governing Type Firing Order Starting System Cooling System Lubricating System Lubricating Oil Lubricating Oil Capacity (L) Intake Resistance kPa (mm/Aq) Back Pressure kPa (mm/Hg) Ho (Heat Rejection to coolant) (kcal/H) Model Frequency (Hz) Continuous Output (kW/kVA) Power Efficiency Type Exciter Type Voltage Regulator Voltage Regulation No. of Phases Insulation Protection Rated Power Factor Stator Winding Winding Pitch Winding Leads Waveform Distortion Altitude (m) YKBT-310/S Diesel 9/11 9.9/12.1 KUBOTA V1505-E2BG Water-cooled, in line, 4 stroke, 1500rpm 11.1 12.2 Diesel fuel No. 2-D(ASTMD975) 90 2.78 13.73 (140) 5.7 Lead-acid, 1 x 12V - 80AH Spherical type (E-TVCS) 78 x 78.4 4 1.498 24 All speed mechanical governor 1-3-4-2 Starter (with glow plug) Pressurised radiator, forced circulation with water pump Forced lubricating with trochoid pump Class CF lubricating oil as per API classification is recommended 6.7 <1.96 (200) <7.07 (53) 15,360 SLG164C1, single bearing IP22 50 10.8/13.5 80.7% 4 pole, rotating field Brushless, self excited AS440 +1.0% with 4% engine governing 3 phases, 4 wire Class H IP22 0.8 Double layer concentric Two thirds 12 No load <1.5% 1000 STANDARD FEATURES CONTROL SYSTEM QUALITY STANDARDS n 50°C rated radiator n Powder coated finish n External fuel tank connections n EVAC service points n 110% bunded skid base n All moving parts are fitted with safety guards n Fitted sockets RCD protectors: 3 x 1Ph 15amp 3 pin 1 x 3Ph 20amp 5 pin n Bunded base with drain valve n IP66 rating outlets n Waterproof IP65 n Dust proof electrical components n Rated lifting lugs n Emergency E stop n State of the art control system - Deep Sea n Battery isolator n Door safety interlocks The DSE6020 is an Auto Mains Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications. Monitoring speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level, the module will display warnings, shutdown and engine status information on the back-lit LCD screen and illuminated LED. Our generator sets are compliant with all the main standards, such as ISO8528, ISO14000, GB755, BS5000, VDE0530, ISO3046, IEC34-1, AS3000. ASSEMBLY WARRANTY POLICY 12 months, 1200 hours as per generator. Generators Australia Pty Ltd Warranty Policy. YKBT-310/S SPECIFICATIONS 11kVA UNIT Dimensions L x W x H (m) Dry Weight (kg) Sound at 7m/dB 1.8 x 0.9 x 1.4 920 68 Powered by Japanese Technology. Australian Design. The engine and alternator are closed coupled by means of an SAE flange. A full torsional analysis has been carried out to guarantee no harmful vibration will occur. Anti- vibration pads are affixed between engine alternator feet and base frame. Rubber diagonal isolators are specifically designed to reduce engine and alternator vibration and prevent distortion in the voltage and harmonic output of the generator. All iron and steel surfaces of the canopy fabrication have been sand blasted and then powder coated, which provides an excellent corrosion resistant surface. DSE6020

YKBT-310/S SPECIFICATIONS 11kVA€¦ · GENERATORS AUSTRALIA (08) 6258 4195

Download PDF Report

Upload
others
View
1
Download
0

Embed Size (px)

Citation preview

GENERATORSAUS T R A L I A

www.generatorsaustralia.com.au (08) 6258 4195

GENERAL

ENGINE

ALTERNATOR

ModelPower TypePrime Power (kW/kVA)Standby Power (kW/kVA)

Engine Make and ModelEngine TypeEngine Prime Power (kW)Engine Standby Power (kW)FuelFuel Tank Capacity (L)Fuel Consumption (L/h)Fuel Injection Pressure MPa (kgf/cm2)Coolant Capacity (L)Battery TypeCombustion TypeBore (mm) x Stroke (mm) No. of CylindersDisplacement (L)Compression Ratio Steady Governing TypeFiring OrderStarting SystemCooling SystemLubricating SystemLubricating OilLubricating Oil Capacity (L)Intake Resistance kPa (mm/Aq)Back Pressure kPa (mm/Hg)Ho (Heat Rejection to coolant) (kcal/H)

ModelFrequency (Hz)Continuous Output (kW/kVA)Power EfficiencyTypeExciter TypeVoltage RegulatorVoltage RegulationNo. of PhasesInsulationProtectionRated Power FactorStator WindingWinding PitchWinding LeadsWaveform DistortionAltitude (m)

YKBT-310/SDiesel9/119.9/12.1

KUBOTA V1505-E2BGWater-cooled, in line, 4 stroke, 1500rpm11.112.2Diesel fuel No. 2-D(ASTMD975)902.7813.73 (140)5.7Lead-acid, 1 x 12V - 80AHSpherical type (E-TVCS)78 x 78.441.49824All speed mechanical governor1-3-4-2Starter (with glow plug)Pressurised radiator, forced circulation with water pumpForced lubricating with trochoid pumpClass CF lubricating oil as per API classification is recommended6.7<1.96 (200)<7.07 (53)15,360

SLG164C1, single bearing IP225010.8/13.580.7%4 pole, rotating fieldBrushless, self excitedAS440+1.0% with 4% engine governing3 phases, 4 wireClass HIP220.8Double layer concentricTwo thirds12No load <1.5%1000

STANDARD FEATURES

CONTROL SYSTEM

QUALITY STANDARDS

n 50°C rated radiatorn Powder coated finishn External fuel tank connectionsn EVAC service pointsn 110% bunded skid basen All moving parts are fitted with safety guardsn Fitted sockets RCD protectors: 3 x 1Ph 15amp 3 pin 1 x 3Ph 20amp 5 pinn Bunded base with drain valven IP66 rating outletsn Waterproof IP65n Dust proof electrical components n Rated lifting lugsn Emergency E stopn State of the art control system - Deep Sean Battery isolator n Door safety interlocks

The DSE6020 is an Auto Mains Failure Control Module suitable for a wide variety of single, diesel or gas, genset applications. Monitoring speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level, the module will display warnings, shutdown and engine status information on the back-lit LCD screen and illuminated LED.

Our generator sets are compliant with all the main standards, such as ISO8528, ISO14000, GB755, BS5000, VDE0530, ISO3046, IEC34-1, AS3000.

ASSEMBLY

WARRANTY POLICY 12 months, 1200 hours as per generator. Generators Australia Pty Ltd Warranty Policy.

YKBT-310/S SPECIFICATIONS11kVA

UNIT

Dimensions L x W x H (m)Dry Weight (kg)Sound at 7m/dB

1.8 x 0.9 x 1.492068

The engine and alternator are closed coupled by means of an SAE flange. A full torsional analysis has been carried out to guarantee no harmful vibration will occur. Anti-vibration pads are affixed between engine alternator feet and base frame. Rubber diagonal isolators are specifically designed to reduce engine and alternator vibration and prevent distortion in the voltage and harmonic output of the generator. All iron and steel surfaces of the canopy fabrication have been sand blasted and then powder coated, which provides an excellent corrosion resistant surface.

DSE6020