Yamaha_psr-e213 (Diagrama de Circuito)

7/17/2019 Yamaha_psr-e213 (Diagrama de Circuito)

1/37

SERVICE MANUAL

SPECIFICATIONS.................................................................. 3/4PANEL LAYOUT......................................................... 5CIRCUIT BOARD LAYOUT & WIRING........ 7BLOCK DIAGRAM.............................................. 8DISASSEMBLY PROCEDURES............................................... 9LSI PIN DESCRIPTION.................................................. 15IC BLOCK DIAGRAM 16

CONTENTS

PSR-E213

YPT-210

* YPT-210 is an overseas export model.


2/37

PSR-E213/YPT-210

WARNINGComponents having special characteristics are marked and must be replaced with parts having specification equal to those originallyinstalled.

IMPORTANT NOTICE

This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic service

procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the users, and have

therefore not been restated.

WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruc-

tion of expensive components and failure of the product to perform as specified. For these reasons, we advise all Yamaha

product owners that all service required should be performed by an authorized Yamaha Retailer or the appointed service

representative.

IMPORTANT: This presentation or sale of this manual to any individual or firm does not constitute authorization, certification, recognition of

any applicable technical capabilities, or establish a principal-agent relationship of any form.

The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and service

departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes in speci fica-

tion are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributors ServiceDivision.

WARNING: Static discharges can destroy expensive components. Discharge any static electr icity your body may have accumulated by

grounding yourself to the ground bus in the unit (heavy gauge black wires connect to this bus).

IMPORTANT: Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.

WARNING: CHEMICAL CONTENT NOTICE!

The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where applicable)components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause

cancer and/or birth defects or other reproductive harm.

DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO

EVER!

Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux

vapor!

If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.


3/37

PSR-E213/YPT-210

SPECIFICATIONS


4/37

PSR-E213/YPT-210


5/37

PSR-E213/YPT-210

PANEL LAYOUT

Front panel

[STANDBY/ON] switch

[MASTER VOLUME][+] button

[-] button

LESSON PART

[L] button

[R] button

[LISTEN & LEARN] button

[TIMING] button

[WAITING] button

[FUNCTION] button

[SONG] button

[STYLE] button

[VOICE] button

Number buttons [0] [9], [+], [-]

[DEMO] button

[METRONOME ON/OFF] button

[A-B REPEAT] button

[ACMP ON/OFF] button

[REW] button

[INTRO/ENDING/rit] button

[FF] button

[MAIN/AUTO FILL] button

[TEMPO/TAP] button

[PAUSE] button

[SYNC START] button

[START/STOP] button

1

2

3

4

5

6

7

8

9

0

A

B

C

D

E

F

G

H

I

1

2

3

4

5

6

7

8

9

0

A

B

C

D

E

F

G

H

I

GrandPno001

001

1 4 5 62 3

M

D F G H IE J K L

B890 C7 A


6/37

PSR-E213/YPT-210

Rear panel

MIDI IN/OUT terminals

SUSTAIN jack

PHONES/OUTPUT jack

DC IN 12V jack

N

O

P

Q

N

O

P

Q

N O P Q


7/37

PSR-E213/YPT-210

CIRCUIT BOARD LAYOUT & WIRING

PNAM2/2

PNAMDMLCD 1/2

Speaker L

w

Upper case side

Lower case side

Speaker R

6 7

9

41

8 3 5

MK-L MK-H

+

+

Location

Parts No.

30

120

WH103

WH104

WH201

WH202

WH301

WH302

120c

*1

*1

*3

*3

*3

*3

*3

*3

*1

*4

*5

*4

*4

*5

*5

*4

*4

*4

*1

*2

*2

*1

*3

*2

*2

*1

*1

*1

*4

*7

*7

*4

*4

*6

*6

*4

*4

*4

1

2

3

4

9

8

7

6

5

MK

BATTERY

PN3

PN

SP

SP

PN4

PN1

MK

MK-L

PNAM1/2-CN101

PNAM1/2-CN103

PNAM1/2-CN104

PNAM1/2-CN201

PNAM2/2-CN202

PNAM2/2-CN301

PNAM2/2-CN302

MK-L

DMLCD-CN501

Battery terminal A

Battery terminal B

DMLCD-CN601

PNAM2/2-CN303

Speaker-L

Speaker-R

DMLCD-CN602

DMLCD-CN603

MK-H

17P

3P

10P

10P

2P

2P

12P

6P

11P

WE156400

(WE15510)

(WE15580)

(WE15550)

(WE67670)

(WE67670)

(WE15600)

(WE15560)

(V719030)

Connector Assembly

Destination

RemarksNo.


8/37

PSR-E213/YPT-21

0

8

BLOCK

DIAGRAM

DMLCD

(C1~B3) (C4~C6)MK-HMK-L

Keybord61KE

Y

(16N)

NON TOUCH RESPONSE

1

4

2

5

3 1

4

2

5

3

CN202

(2P)

CN303

(10P)

CN104(10P)

CN201

(2P)

SPEAKER L

4 12cm

4 12cm

CN101(3P)

JK101

JK102

(8P)

CN302 (6P)

SUSTAINMIDI

OUT

JK302JK301 JK303

IN

MIDI I / F

IC301(6P)TR301,302KEYBOARD SW

MATRIX

KEYBOARD SW

MATRIX

SW MATRIX

SW05,06,11,12

SW17,18,22-36

CN301 (12P)

2/2

IC301(80P)

LCD

DRIVER

+5D

OUT1-6

CN603

(6P)

CN602

(12P)

LCD

DISPLAY

1/2

CN601

(10P)

CN103

(10P)

IC101

(3P)

REGULATOR

+5V

REGULATOR

+2.5V

REGULATOR

+3.3V

IC401 (3P)

IC402 (3P)

+2.5V

+5D

+3.3D

+5A

STANDBY

SW

STANDBY/ON

TR101,102

SW101

POWER AMP

BA5417

IC201

(15P)

SW MATRIX

SW01-04,

SW07-10,

SW13-16,19

L

R

OUT1-4

IN1-4

IN1-6

OUT1-6

SPEAKER R

PHONES /

OUTPUT

DC IN 12V

BATTERYS

1.5V x 6

AC adaptor

PA-3B/3C

"AA"SIZE,LR6 or

EQUIVALENT BATTERIES.

SYSCKBCLK

WCLK

SDO

IN1-6

RS

ENB

+5A

IC201 (16P)

24bit

DAC

AK4385ETLPF

IC202 (8P)

R

R

+B

L

L

+2.5V

+3.3D

SWL01

YMW767-VT

IC101

(128P)

16.9344MHz

CRYSTALRESONATOR

RESET

+3.6V 50ms

IC103

(5P)

X101

12

13

70-76,78-86

91-103,105-108,110-114

25-30,

67,68,87

115,121-123,

125-128

1645

17,24,41,47,

66,90,120

15,46,

89,119

1-4

14

37

12

8

6,5

2,3

5

9.10

7

1 11

12 3

4

5

11,12

34

117

40,42-44

35 39

48-55

38,57-61

32

31

36

MASK

ROM

32M

PROG/WAVE

IC102(48P)

+3.3D

+5D

MD00-15

MA01-22

+5A

N11-16

B11-16

SCLK

SCLK

PSWI

PSWO

PSWO

PSWI

PSWO

PSWO

CN501

(17P)

XI

XO

RXD0

RXD0

TXD0

TXD0

OUT1-6

+5D

+5A

39-463836

33

28CA1-8834618

+

PNAM

PNAM


9/37

PSR-E213/YPT-210

DISASSEMBLY PROCEDURES

[250A] : Bind Head Tapping Screw-B 3x12 MFZN2W3 (WE987400)

[260A] : Bind Head Screw 3x30 MFZN2W3 (WF491000)

[300] : Bind Head Screw 3x20 MFZN2W3 (WF489300)

Fig. 1

Caution: Be sure to attach the removed filament tape just

as it was before removal.

1. Lower Case Assembly(Time required: About 1 minute)

1-1 Remove the five (5) screws marked [250A], two (2)

screws marked [260A], and two (2) screws marked [300].

The lower case assembly can then be removed. (Fig. 1)

Bottom view

Lower Case Assembly

[260A] [250A] [260A] [250A][250A]

[300][300]


10/37

PSR-E213/YPT-210

2. DMLCD Circuit Board, LCD Display(Time required: About 3 minutes each)

2-1 Remove the lower case assembly. (See procedure 1)

2-2 DMLCD Circuit Board

2-2-1 Remove the eight (8) screws marked [160A]. TheDMLCD circuit board can then be removed. (Fig. 2)

* When attaching or removing the MK wire (DMLCD cir-

cuit board: CN501), insert or pull the MK wire while press-

ing the both side of the connector downward. (Fig. 3)

* When installing the DMLCD circuit board, tighten the

screws 1 through 8 in numerical order. (Fig. 2)

2-3 LCD Display

2-3-1 Remove the DMLCD circuit board. (See procedure 2-2)2-3-2 Remove the rubber connector and LCD holder A.

The LCD display can then be removed. (Fig. 4)

* When attaching the rubber connector, set the con-

ductive part to face inside. (Fig. 4)

3. PNAM Circuit Board (1/2, 2/2)

(Time required: About 3 minutes each)3-1 Remove the lower case assembly. (See procedure 1)

3-2 PNAM Circuit Board 1/2

3-2-1 Remove the eleven (11) screws marked [160B]. The

PNAM circuit board 1/2 can then be removed. (Fig. 2)

3-3 PNAM Circuit Board 2/2

3-3-1 Remove the eight (8) screws marked [160C]. The PNAM

circuit board 2/2 can then be removed. (Fig. 2)

* When replacing the PNAM circuit board, remove the

wiring assembly GND1 from the old PNAM circuit board

and then attach it on the new PNAM circuit board if the

wiring assembly GND1 is originally installed. For details,

refer to page 18. (U only)

4. Speaker (Time required: About 2 minutes)

4-1 Remove the lower case assembly. (See procedure 1)4-2 Remove the four (4) screws marked [30]. The speaker

can then be removed. (Fig. 2)

* The right and left speakers can be removed in the

same manner.

5 L C K b d A bl


11/37

PSR-E213/YPT-210

Bottom view[160C]

[160A][260B] [160B][160C]

[160B] [160B] [30][30]

[250B] [250B]

[160A] [160A]

DMLCDPNAM2/2

PNAM1/2

CN501

3

1

4

7

5

8

6

2

Lower Case Keyboard Assembly

Wiring Assembly GND1(U only)

Fig. 2

[30] : Bind Head Tapping Screw-B 4x8 MFZN2W3 (WE974600)


[160B] : Bind Head Tapping Screw-B 3x8 MFZN2W3 (WE774300)[160C] : Bind Head Tapping Screw-B 3x8 MFZN2W3 (WE774300)

[250B] : Bind Head Tapping Screw-B 3x12 MFZN2W3 (WE987400)

[260B] : Bind Head Screw 3x30 MFZN2W3 (WF491000)

Fig. 3

Attaching or Removing the MK Wire

DMLCD Circuit Board: CN501

MK Wire

Rubber Connector

LCD

LCD Holder A


12/37

PSR-E213/YPT-210

6. Keyboard Assembly

6-1 Remove the lower case keyboard assembly. (See pro-

cedure 5)

6-2 White and black keys for one octave unit are combined

as a set. There are five sets in total.Remove the four (4) screws marked [110A]. The key-

board can then be removed. (Fig. 5) There are two (2)

hooks at the back of the black keys. (Photo.1)

Press the hook for the black key and lift slightly, and pull

forward to remove the hook for the black key to lift it.

6-3 To remove the white key C6, remove the screw marked

[110B], press the hook at the back to lift slightly, and pull

it forward to remove the hook to lift it.

7. Rubber Contact


cedure 5)

7-2 Remove the keyboard corresponding to the rubber con-

tacts to be removed. (See procedure 6)

7-3 Remove the rubber contacts. (Photo. 2, Fig. 6)

[110A]

C1 B2 B3 C4 C6

[110A] [110A] [110A] [110B][110A]

Top view

[110A] : Bind Head Tapping Screw-P 3x20 MFZN2W3 (WF492000)

[110B] : Bind Head Tapping Screw-P 3x20 MFZN2W3 (WF492000)

Fig. 5


13/37

PSR-E213/YPT-210

8. MK-L Circuit Board, MK-H Circuit Board(Time required: About 6 minutes each)


cedure 5)

8-2 MK-L Circuit Board

8-2-1 Remove the keyboards from C1 to B3. (See procedure 6)8-2-2 Remove the four (4) screws marked [90A], and eight (8)

screws marked [100A]. The MK-L circuit board can then

be removed. (Fig. 6-1)

8-3 MK-H Circuit Board

8-3-1 Remove the keyboards from C4 to C6. (See procedure 6)


[90B] : Bind Head Tapping Screw-B 3x8 MFZN2W3 (WE774300)

[100A] : Bind Head Tapping Screw-P 3x12 MFZN2W3 SP (WH899400)

[100B] : Bind Head Tapping Screw-P 3x12 MFZN2W3 SP (WH899400)

Fig. 6-1

Top view

[100A] [100A] [100B]

MK-L MK-H

[90A] [90A]

Rubber Contact

Rubber Contact

[90A] [90A] [90B]


[90B] [90B]

Rubber Contact

Rubber Contact

Rubber Contact

Shield Sheet H(U only)

Shield Sheet L(U only)

Fig. 6-2


14/37

PSR-E213/YPT-210

9. How to Remove Spring Terminals.

A Spring Terminal A, Spring Terminal B


cedure 5)

9-2 Remove the keyboards from C1 to B2. (See procedure 6)9-3 Remove the battery connector assembly soldered to the

spring terminal A and spring terminal B. (Fig. 7, Photo. 3)

9-4 Reverse the lower case keyboard assembly and remove

the battery lid assembly. (Fig. 8)

9-5 Lift the spring terminal A slightly and slide it rightward to

remove it. (Fig. 9)

9-6 Remove the hook for the spring terminal B to pull it out

from inside. (Fig. 9)

B Spring Terminal C, Spring Terminal D

9-1 Remove the battery lid assembly at the bottom side of

the lower case keyboard assembly. (Fig. 8)

9-2 Remove the hooks to pull out the spring terminal C and

spring terminal D. (Fig. 9, Fig. 10)

Top view

Battery Connector AssemblySoldering

Soldering

Soldering

Spring Terminal A

Spring Terminal B

Battery Connector Assembly

Bottom view

Lower Case Keyboard Assembly

Battery Lid Assembly

Fig. 7 Photo. 3

Spring Terminal A

Spring Terminal D

Spring Terminal B

Hook

Hook

PSR E213/YPT 210


15/37

PSR-E213/YPT-210

LSI PIN DESCRIPTION

CONTENTS ML9040A-B01GAZ03A(XZ987A00) LCD DRIVER ................................. 16

NT3881DF-01(X3148A00) LCD DRIVER ................................................16

YMW767-VTZ(X6055A00) CPU(Central Processing Unit) .....................15

PIN

NO. I/ONAME FUNCTION

YMW767-VTZ (X6055A00) CPU (Central Processing Unit)PIN

NO. I/ONAME FUNCTION

DMLCD: IC101

Ground2 TESTN (SCMD) I TEST Pin3 PLLBPN I PLL bypass4 PLLVDD Power supply5 CIN Condenser connect6 PLLVSS Ground7 TRSTN I8 TMS I9 TCK I JTAG

10 TDI I11 TDO O12 XI I

Crystal oscillator13 XO O14 VSS

VSS

Ground15 VDD Power supply16 ICN I Initial clear

17 ECSN I Chip select18 EWRN/PD5 I Write enable19 ERDN/PD4 I Read enable20 EA3/PD3 I21 EA2/PD2 I

Address bus22 EA1/PD1 I23 EA0/PD0 I24 IOVDD Power supply25 ED0/PC0 I/O26 ED1/PC1 I/O27 ED2/PC2 I/O28 ED3/PC3 I/O

Data bus /29 ED4/PC4 I/O

30 ED5/PC5 I/O31 ED6/PC6 I/O32 ED7/PC7 I/O33 VSS Ground34 IRQ0N/PH0 I Interrupt request35 TxD0 O

Serial port 036 RxD0 I37 TxD1/PG2 O

Serial port 1 /38 RxD1/PH1 I39 SCLK1/PH2 I EXT Clock / 40 SDO O Serial data41 SDI/PH3 I Serial data / 42 BCLK O Bit clock43 WCLK/SYO O Word clock44 SYSCLK/PG3 O System clock45 VSS Ground46 VDD

Power supply47 IOVDD48 PA0 I/O49 PA1 I/O50 PA2 I/O51 PA3 I/O

65 VSS Ground66 IOVDD Power supply67 LBN/LWRN/PF6 O Low byte enable68 UBN/UWRN/PF7 O Upper byte enable69 RDN/PF4 O Read enable70 MD00 I/O71 MD08 I/O72 MD01 I/O73 MD09 I/O Memory data bus74 MD02 I/O75 MD10 I/O76 MD03 I/O77 VSS Ground78 MD11 I/O79 MD04 I/O80 MD12 I/O

81 MD05 I/O82 MD13 I/O Memory data bus83 MD06 I/O84 MD14 I/O85 MD07 I/O86 MD15 I/O87 WRN/PF5 O88 VSS Ground89 VDD Power supply90 IOVDD Power supply91 MA17 O92 MA16 O93 MA15 O

94 MA14 O95 MA13 O96 MA12 O97 MA11 O Memory address bus98 MA10 O99 MA09 O

100 MA08 O101 MA07 O102 MA06 O103 MA05 O104 VSS Ground105 MA04 O106 MA03 O

Memory address bus107 MA02 O108 MA01 O109 CS0N/PG0 O Chip select / 110 MA18 O

Memory address bus111 MA19 O112 MA21/PF1 O

Memory address bus113 MA22/PF2 O114 MA20 O Memory address bus115 MA23/PF3 O Memory address bus

1

PSR E213/YPT 210


16/37

PSR-E213/YPT-210

IC BLOCK DIAGRAM

1 8A Output VV+

AK4385ET(X6040A00)D/A ConverterDMLCD: IC201

NJM4580E(X2331A00)Dual Operational AmplifierDMLCD: IC202

1 16

MCLK

MCLK DZFL

ML9040A-B01GAZ03A(XZ987A00) LCD DRIVER

NT3881DF-01(X3148A00) LCD DRIVERPIN

NO.

123456789

10111213141516171819202122

23242526272829303132333435

3637383940

I/O

OOOOOOOOOOOOOOOOOOOOOO

IO

OO

OO

III

I/OI/O

S22S21S20S19S18S17S16S15S14S13S12S11S10S9S8S7S6S5S4S3S2S1

VssOSC1OSC2

V1V2V3V4V5

CLK1CLK2VddMD

RSR/WE

DB0DB1

NAME

Segment signal output for LCDdriving

GroundOscillatorOscillator

Power supply

Data latch clockData shift clockPower supply (+5 V)Altamated signal for LCD driver outoutDisplay data interface

Read/writeEnableData interfaceData interface

FUNCTIONPIN

NO.

41424344454647484950515253545556575859606162

63646566676869707172737475

7677787980

I/O

I/OI/OI/OI/OI/OI/OOOOOOOOOOOOOOOOO

OOOOOOOOOOOOO

OOOOO

DB2DB3DB4DB5DB6DB7C1C2C3C4C5C6C7C8C9C10C11C12C13C14C15C16

S40S39S38S37S36S35S34S33S32S31S30S29S28

S27S26S25S24S23

NAME

Data interface

Common signal output for LCDdriving

Segment signal output for LCDdriving

FUNCTION

DMLCD: IC301

PSR E213/YPT 210


17/37

PSR-E213/YPT-210

DMLCD Circuit Board

to MK-Lto PNAM2/2-CN302

to PNAM2/2-CN301 to PNAM1/2-CN103

CIRCUIT BOARDS

Component side

PSR-E213/YPT-210


18/37

PSR-E213/YPT-210

PHONES/

OUTPUT DC IN 12Vto BATTERY

toSPEAKE

R

L

to DMLCD-CN601 to PNAM2/2-CN303

notinstalled

LISTEN&LEARN

TIMING

WATING

START/STOP

SYNC.

START

TEMPO/

TAP

LESSON R LESSON L

MASTER

VOL. UP

STANDBY

/ON

MASTER

VOL. DOWN

MAIN/

FILL

INTRO/

ENDING ACOMP

PNAM 1/2 Circuit Board


Component side

PSR-E213/YPT-210


19/37

PSR E213/YPT 210

toDMLCD-C

N603

toPNAM1/2-CN104

to DMLCD-CN602

toSPEAKER

R

MIDI

IN OUT SUSTAIN

3 2 1

456

789

-0+

REVERB

ON/OFF

SOUND

EFFECT KIT

PORTABLE

GRAND

VOICE

STYLE

FUNCTION

SONG

DEMO

METRONOME ON/OFF

PNAM 2/2 Circuit Board

Component side

PSR-E213/YPT-210


20/37

TEST PROGRAM

1 Preparation

1) Use an AC adaptor PA-3C or PA-32.

2) Measuring device: Frequency counter, which can detect thousandth digit, Level meter (with JIS-C filter).

Note: Connect a load resistor of 33 to the terminal [PHONES/OUTPUT]. Input impedance of the measuring device

should be 1 Mor more.

3) Jig: Foot switch (FC-4 or FC-5), MIDI cable.

2 Start-up the Test Program

Holding down the keys [C2#], [F2], [G2#] simultaneously, press the [STANDBY/ON] switch.

GTEST

F2

C2# 2#

STANDBY/ON

3 Test Procedure1) When the test program is started, TEST will be displayed on the LCD.

2) Press the [] or [+] button of the number buttons to select a test program item.

3) Press the [START/STOP] button to execute the test.

If the result is OK or test item is completed, press the [START/STOP] button again to return to the item selection

display.

Press the [] or [+] button of the number buttons to select the next test item.

A cursor (_) is shown below the first character of the item for which the test results are OK.

If the results are NG, press the lowest key in the keyboard (white key C1) to return to the item selection display.

4 Test program list

1

2

3

4

5

001 : Version

002 : Rom Chk1

011 : TG1 Chk

013 : Pit Chk

014 : Output R

Displays the version of the ROM.

[***] Prog is displayed on the LCD. [***]: Version

ROM connected to the bus of the CPU is checked.

Make sure that Rom OK is displayed on the LCD.

Plays each key automatically in the order of scale (auto-scaling). (32 notes from C2 to G4 will be played.)

Check that there is no abnormal sounds or noise. When the auto-scaling is finished, TG1 End will be shown.Press a key to play a sound. (Single note, the key pressed first will be played.)

Connect the frequency counter to the [PHONES/OUTPUT] terminal. (Either L or R)

Checks pitch. (440.14 Hz 0.22 Hz)

Check that the correct signal is output.

Connect the level meter (with JIS-C filter) to the L/R terminals of the [PHONES/OUTPUT]. (33 of load)

PHONES L: -45 dBu or less PHONES R: -2 dBu 2 dB

(0 dBu = 0.775 V)

Test No. LCD display Test descriptions, judging conditions, etc.

PSR-E213/YPT-210


21/37

Test No. LCD display Test descriptions, judging conditions, etc.

8

9

10

11

12

13

028 : LCD On

029 : LCD Off

031 : PD1 Chk

037 : MIDI Chk

041 : Rom Chk2

048 : TEST Exit

Make sure that all the segments are lit on the LCD.

Make sure that all the segments are turned off on the LCD.

Connect a footswitch (FC-4 or FC-5) to the [SUSTAIN] terminal.

Make sure that C3 is played when the footswitch pedal is pressed and C4 is played when the footswitch pedal

is released.

Make sure that PD1 OK is displayed on the LCD when finished.

Connect the [MIDI IN] jack and [MIDI OUT] jack with a MIDI cable and then execute the test. Make sure that

C4 is played and MIDI OK is displayed on the LCD.

Checks the ROM connected to the CPU bus.

Make sure that Rom OK is displayed on the LCD.

It will take about 5 seconds for the check.

Execute this to leave the test program and change to the play mode.

Switch test item list

1

2

3

4

5

67

8

9

10

11

12

13

14

15

16

17

M.VOLUME DOWN

M.VOLUME UP

LEFT

RIGHT

LISTEN & LEARN

TIMINGWAITING

FUNCTION

SONG

STYLE

VOICE

TENKEY 1

TENKEY 2

TENKEY 3

TENKEY 4

TENKEY 5

TENKEY 6

Volume -

Volume +

Left

Right

Listen

TimingWaiting

Function

Song

Style

Voice

Tenkey 1

Tenkey 2

Tenkey 3

Tenkey 4

Tenkey 5

Tenkey 6

C2

C#2

D2

D#2

E2

F2F#2

G2

G#2

A2

A#2

B2

C3

C#3

D3

D#3

E3

Turn SW Name LCD Display Note Number Turn SW Name LCD Display Note Number

18

19

20

21

22

2324

25

26

27

28

29

30

31

32

33

34

TENKEY 7

TENKEY 8

TENKEY 9

TENKEY -

TENKEY 0

TENKEY +DEMO

METRONOME

A-B REPEAT

REW

FF

TEMPO/TAP

PAUSE

START/STOP

PORTABLE GRAND

SOUND EFFECT

REVERB ON/OFF

Tenkey 7

Tenkey 8

Tenkey 9

Tenkey -

Tenkey 0

Tenkey +Demo

Metro

AB Rep

Rew

FF

Temp/TAP

Pause

StartStp

GP

SoundEff

Reverb

F3

F#3

G3

G#3

A3

A#3B3

C4

C#4

D4

D#4

E4

F4

F#4

G4

G#4

A4

PSR-E213/YPT-210


22/37

G TEST

F2

C2# 2#

STANDBY/ON

PSR-E213/YPT-210


23/37

PSR-E213/YPT-210


24/37

MIDI IMPLEMENTATION CHART

YAMAHA [ Portable Keyboard ] Date:11-Oct-2006

Model PSR-E213/YPT-210 MIDI Implementation Chart Version:1.0

Transmitted Recognized RemarksFunction...

Basic Default 1 - 16 1 - 16

Channel Changed x x

Default 3 3

Mode Messages x x

Altered ************** x

Note 0 - 127 0 - 127

Number : True voice ************** 0 - 127

Velocity Note ON o 9nH,v=1-127 *2 o 9nH,v=1-127

Note OFF x x

After Key's x x

Touch Ch's x x

Pitch Bend x o

0,32 o o Bank Select

1 *1 o Modulation wheelxx6 *1 o Data Entry(MSB)

38 x *1 x Data Entry(LSB)

7,10 o o

Control 11 x *1 o Expression

64 o o Sustain

Change 71,73,74 x *1 o

Prog o 0 - 127 o 0 - 127

Change : True # **************

System Exclusive o o

: Song Pos. x x

Common : Song Sel. x x

: Tune x x

System : Clock o o

Real Time: Commands o o

:All Sound OFF x o(120,126,127)Aux :Reset All Cntrls x o(121) :Local ON/OFF x o(122)Mes- :All Notes OFF x o(123-125)sages:Active Sense o o

R t

72 x o Release Time

84 x *1 o Portamento Cntrl

91,93 o o Effect 1,3 Depth

96,97 x o RPN Inc,Dec100,101 x o RPN LSB,MSB

PSR-E213/YPT-210


25/37

PSR-E213/YPT-210


26/37

MIDI DATA FORMAT

PSR-E213/YPT-210


27/37

PARTS LIST

OVERALL ASSEMBLY............................................................ 2LOWER CASE KEYBOARD ASSEMBLY........... 4KEYBOARD ASSEMBLY.................................................. 5ELECTRICAL PARTS........................................................... 6

CONTENTS

Notes: DESTINATION ABBREVIATIONS

A : Australian modelB : British modelC : Canadian modelD : German model

E : European modelF : French modelH : North European modelI : Indonesian modelJ : Japanese modelK : Korean model

M: South African modelO : Chinese modelQ : South-east Asia modelT : Taiwan model

U : U.S.A. modelV : General export model (110V)W: General export model (220V)N,X: General export modelY : Export model

WARNING

Components having special characteristics are marked and must be replaced with parts havingspecification equal to those originally installed.

The numbers QTY show quantities for each unit.

The parts with -- in PART NO. are not available as spare parts.

PSR-E213/YPT-210


28/37

OVERALL ASSEMBLY

190

160

10

280

250

250

230

260

L50

L50

L30

L20

L30

L20

280

130

140120

110

100

90

70

310

50

60

80290

290

40

150 (2/2)

150

(1/2)

*

*

160

160

20

30

20

30

210

220

200

Lower case keyboard assembly:See page 4.

Music Rest

320

320

PSR-E213/YPT-210


29/37

RANKQTYREMARKSDESCRIPTION REF NO. PART NO.OVERALL ASSEMBLY PSR-E213/YPT-210

Overall Assembly PSR-E213 (WH70620)

Overall Assembly YPT-210 (WH70720)

* 10 Upper Case PSR-E213

* 10 Upper Case YPT-210

20 Speaker 4ohm 3W 2 04

30 Bind Head Tapping Screw-B 4x8 MFZN2W3 8 01

40 Panel Switch x1 STANDBY/ON 01

50 PN Switch x2 MASTER VOLUME -,+ 01

60 Panel Switch x2 LESSON PART L,R 01

70 Panel Switch x4 SONG/STYLE A-B REPEAT,.., 03

TEMPO/TAP

* 80 PN Switch x3 LISTEN&LEARN,...,WAITING

* 90 PN Switch x2 PAUSE,START/STOP

100 Panel Switch x4 SONG,STYLE,VOICE 01

FUNCTION

* 110 PN Switch x3 PORTABLE GRAND,...

REVERB,ON/OFF

* 120 PN Switch Printed x12 1-9,-,+

130 Panel Switch x1 DEMO 01

140 Panel Switch x1 METRONOME ON/OFF 01

150 Circuit Board PNAM 1/2,2/2 11


190 LCD TTR7994DPTDCN-C3 06

200 Rubber Connector SS-105L 2 01

210 LCD Holder A 01* 220 Circuit Board DMLCD

230 Lower Case Keyboard Assembly (WD88040)

* 240 Lower Case Assembly


260 Bind Head Screw 3x30 MFZN2W3 3 01

270 Battery Lid Assembly 03

270a Battery Cover (WD87980)

270b Battery Cushion WHITE (WD87990)

270c Nonwoven Fabric Cloth (WD88000) 2

280 Nonwoven Fabric Cloth (WF25440) 2

290 Pet Tape MY7# 12X50 (WB79380) 1

300 Bind Head Screw 3x20 MFZN2W3 2 01310 Nonwoven Fabric Cloth (WG81830) 2

320 Nonwoven Fabric Cloth 40x13x0.5 (V771130) 2

* Lower Case Assembly

L10 Lower Case (WH70890)

L20 Holder 3

L30 Bind Head Tapping Screw-B 3x8 MFZN2W3 6 01

L40 Foot T1.6 2 01

L50 Cushion 435X15X2.0 (WK17310) 2

ACCESSORIES PSR-E213/YPT-210

Music Rest 06s AC Adaptor PA-3C J J

s AC Adaptor PA-3C CHN O 07

* Japanese Guide Sheet PSR-E213 J

* Chinese Guide Sheet PSR-E213 O

--

--

WH708400

WH708500

X3804A00

WE974600

WD893400

WD893500

WD893600

WD893700

WH707500

WH707600

WD894000

WH707700

WH707800

WD894400

WD894500

WE004900

WE774300

WD570700

V3755900

V7172200

WH726900

--

WH708800

WE987400

WF491000

WD896000

--

--

--

--

--

WF489300--

--

WH708800

--

V I104400

WE774300

CB043750

--

V2115000V8028600

WF322000

WH706800

WJ074100

PSR-E213/YPT-210


30/37

LOWER CASE KEYBOARD ASSEMBLY

RANKQTYREMARKSDESCRIPTION REF NO. PART NO.

10

20

60

70

80

90

100

110

110

120

220

200

210

90

30120

Keyboard assembly: See page 5.

RED

BLACK

Lower Case Keyboard Assembly PSR-E213/YPT-210 (WD88040)

10 Lower Case 08

20 Keyboard Assembly 16N C61 P1M (WE12680)

30 Cable MK 01

60 Foot T1.6 3 01

70 Spring Terminal A 01

80 Spring Terminal B 01

--

WD839500

--

WE156400

CB043750

WD879200

WD879300

PSR-E213/YPT-210


31/37

KEYBOARD ASSEMBLY

RANKQTYREMARKSDESCRIPTION REF NO. PART NO.

110

110

40

40

10

10

20

90

120

100

50

60

20

30

110

70

90

100

120d

50

80

120a

120c

120b

MK circuit board assembly

Lower case: See page 4.

Keyboard Assembly 16N C61 P1M PSR-E213/YPT-210 (WE12680)

10 White Key CEGB 5 02

20 White Key DFA 5 02

30 White Key C 02

40 Black Key 16N 5 06

50 Contact Rubber 16N-1M OCT LIM 5 03

60 Contact Rubber 16N C 1M 04

--

WB125200

WB125300

V4760300

VZ271700

WE152500

VZ271900

PSR-E213/YPT-210


32/37

ELECTRICAL PARTS

RANKQTYREMARKSDESCRIPTION REF NO. PART NO.ELECTRICAL PARTS PSR-E213/YPT-210

* Circuit Board DMLCD (WH72680)(X5891C0)

Circuit Board MK-H (VZ27220)(XT701A0) 09Circuit Board MK-L 16N-1M C61 P1 (V719100)(XZ850A0) 14

Circuit Board PNAM 1/2,2/2 (X5890C0) 11

* Circuit Board DMLCD (WH72680)(X5891C0)

C0101 Ceramic Capacitor-F (chip) 0.1uF 25V Z 01

C0102 Ceramic Capacitor-SL(chip) 100pF 50V J 01


C0104 Ceramic Capacitor-B (chip) 4700pF 50V K 01

C0105 Electrolytic Cap. (chip) 47uF 6.3V 01


-122 Ceramic Capacitor-F (chip) 0.1uF 25V Z 01

C0123 Ceramic Capacitor-CH(chip) 22pF 50V J 01



C0202 Electrolytic Cap. (chip) 10uF 16V 01


C0204 Electrolytic Cap. (chip) 10uF 16V 01

C0205 Ceramic Capacitor-B (chip) 0.01uF 50V K 01

C0206 Ceramic Capacitor-B (chip) 0.01uF 50V K 01


-210 Ceramic Capacitor-B (chip) 2700pF 50V K 01


C0212 Ceramic Capacitor-SL(chip) 100pF 50V J 01C0301 Ceramic Capacitor-F (chip) 0.1uF 25V Z 01










-511 Ceramic Capacitor-SL(chip) 100pF 50V J 01

C0512 Ceramic Capacitor-SL(chip) 180pF 50V J 01-517 Ceramic Capacitor-SL(chip) 180pF 50V J 01



-615 Ceramic Capacitor-SL(chip) 100pF 50V J 01





CN501 Wire Trap 52004-1710 17P TE

CN601 Wire Trap 52147 10P TE 01

CN602 Wire Trap 52147 12P TE 01

CN603 Wire Trap 52147 6P TE 01IC101 IC YMW767-VTZ CPU 10

* IC102 IC MR27T3202L MASK ROM 32M PROG/WAVE

IC103 IC S-80136ANMC-JCV-T2RESET

01

IC103 IC BD45365G 01

IC201 IC AK4385ET DAC 03

IC202 IC NJM4580E TE2 OP AMP 01

IC301 IC NT3881DF-01LCD DRIVER

05

WH726900

VZ272400

V7189900

WE004900

WH726900

US145100

US062100

US062220

US063470

UF017470

US145100

US145100

US061220

US061220

US145100

UF037100

US145100

UF037100

US064100

US064100

US063270

US063270

US062100

US062100

US145100

US145100

UF017470

UF018100

US145100

US145100

UF017470

US145100

US145100

US062100

US062100

US062180US062180

US145100

US062100

US062100

US061470

US063100

US145100

US061470

WE202600

VF728200

VK025600

VF728300X6055A00

X8088200

X4374A00

X5888A00

X6040A00

X2331A00

X3148A00

PSR-E213/YPT-210


33/37

RANKQTYREMARKSDESCRIPTION REF NO. PART NO.R0201 Carbon Resistor (chip) 1.2K 1/16W J 01

R0202 Carbon Resistor (chip) 1.5K 1/16W J 01

R0203 Carbon Resistor (chip) 4.7K 1/16W J 01-206 Carbon Resistor (chip) 4.7K 1/16W J 01



R0209 Carbon Resistor (chip) 180 1/16W J 01








R0301 Carbon Resistor (chip) 91K 1/16W D


-306 Carbon Resistor (chip) 2.2K 1/16W J 01


R0310 Carbon Resistor (chip) 47K 1/16W J 01


-503 Carbon Resistor (chip) 100 1/16W J 01













RA101 Resistor Array 47Kx4 01


RA501 Resistor Array 100x4 01


RA503 Resistor Array 10Kx4 01RA504 Resistor Array 1Kx4 01





X0101 Quartz Crystal Unit 16.9344M HC-49S-SM 01

Circuit Board (VZ27220)(XT701A0) 09

2 Diode 1SS133,1SS176 TE 50 01

3 Wire Trap 52147 11P TE 6 01

Circuit Board 16N-1M C61 P1 (V719100)(XZ850A0) 142 Diode 1SS133,1SS176 TE 8 01

3 Wire Trap 52147 11P TE 3 01

4 Wire Trap 52004-1710 17P TE 3

Circuit Board PNAM 1/2,2/2 (X5890C0) 11

Jumper Wire 0.55 TIN (VA07890)

Bind Head Tapping Screw-B 3x8 MFZN2W3 2 01

RD356120

RD356150

RD356470

RD356470

RD356220

RD356220

RD355180

RD355180

RD356220

RD355180

RD355180

RD355100

RD355100

RD356220

RF457910

RD356220

RD356220

RD355820

RD357470

RD355100

RD355100

RD357100

RD357100

RD356100

RD356100

RD357470

RD356100

RD355100

RD355100

RD356100

RD355100

RD357470

RD357470

RE047470

RE047470

RE045100

RE045100

RE047100RE046100

RE045100

RE046100

RE046100

RE047470

WE194400

VZ272400

VB941200

VK025500

V7189900VB941200

VK025500

WE202600

WE004900

--

WE774300

DMLCD and MK-H and MK-L and PNAM

PSR-E213/YPT-210


34/37

RANKQTYREMARKSDESCRIPTION REF NO. PART NO.C0202 Electrolytic Cap. 1.0uF 50V 01

C0202 Electrolytic Cap. 1.0uF 50V

C0203 Ceramic Capacitor-B 470pF 50V K 01C0203 Ceramic Capacitor-2B 470pF 63V K

C0204 Ceramic Capacitor-B 470pF 50V K 01

C0204 Ceramic Capacitor-2B 470pF 63V K

C0205 Electrolytic Cap. 47uF 16V 01

C0205 Electrolytic Cap. 47uF 16V







C0209 Semiconductive Cera. Cap. 0.1uF 25V Z 01

C0209 Semiconductor Ceramic Cap. 0.1uF 25V Z 01



C0211 Mylar Capacitor 0.15uF 50V J

C0211 Monolithic Mylar Capacitor 0.15uF 50V 01

C0212 Mylar Capacitor 0.15uF 50V J

C0212 Monolithic Mylar Capacitor 0.15uF 50V 01









C0301 Ceramic Capacitor-F 0.01uF 50V Z 01

C0301 Ceramic Capacitor-2 0.01uF 63V Z

C0302 Semiconductive Cera. Cap. 0.1uF 25V Z 01

C0302 Semiconductor Ceramic Cap. 0.1uF 25V Z 01

C0303 Ceramic Capacitor-B 1000pF 50V K 01

C0303 Ceramic Capacitor 1000P 63V K FORM.

CN101 Base Post Connector XH 3P TE 01

CN103 Cable Holder 51048 10P TE 01CN103 Cable Holder 51048 10P TE

CN104 Cable Holder 51048 10P TE 01

CN104 Cable Holder 51048 10P TE





CN301 Cable Holder 12P TE 51048 01




CN303 Cable Holder 51048 10P TE 01CN303 Cable Holder 51048 10P TE

D0101 Diode 2A02GM

D0101 Diode 2A02M FORMING 01

D0102 Diode 1SS133,1SS176 TE 01

D0102 Diode 1SS133,176,HSS104 01

D0102 Diode 1N4148(DO-34) 01

D0103 Diode 1SS133,1SS176 TE 01

UR866100

V3511900

FG612470

VR025800

FG612470

VR025800

UR837470

V3508400

UR837470

V3508400

UR838100

V3508500

UR838100

V3508500

VC694800

VM902400

UR838100

V3508500

V5515600

VR168500

V5515600

VR168500

UR838470

V3508800

UR838470

V3508800

UR837470

V3508400

UR837470

V3508400

FG644100

VQ175700

VC694800

VM902400

FG613100

VR026200

LB918030

V I878800VY668700

V I878800

VY668700

V I878000

VY668300

V I878000

VY668300

V I879000

VY668900

V I878400

VY668500

V I878800VY668700

V8603100

VV731400

VB941200

VD631600

VV437800

VB941200

PNAM

PSR-E213/YPT-210


35/37

RANKREMARKSDESCRIPTION REF NO. PART NO. QTYD0303 Diode 1N4148(DO-34) 01

D0304 Diode 1SS133,1SS176 TE 01

D0304 Diode 1SS133,176,HSS104 01D0304 Diode 1N4148(DO-34) 01

D0305 Diode 1SS133,1SS176 TE 01

D0305 Diode 1SS133,176,HSS104 01

D0305 Diode 1N4148(DO-34) 01

D0306 Diode 1SS133,1SS176 TE 01

D0306 Diode 1SS133,176,HSS104 01

D0306 Diode 1N4148(DO-34) 01

D0307 Diode 1SS133,1SS176 TE 01

D0307 Diode 1SS133,176,HSS104 01

D0307 Diode 1N4148(DO-34) 01

HS001 Heat Sink Assembly #2685 (V561400)

IC101 IC BA50BC0T +5V 1.0A REGULATOR 03

IC201 IC BA5417 POWER AMP 2.5Wx2 03

IC301 Photo Coupler PC900V0NSZX 04

JK101 Connector HEC0470-01-630DC IN 12V

02

JK101 Connector HTJ-020-05AZ 04

JK102 Phone Jack JACK YKB21-5006PHONES/OUTPUT

03

JK102 Phone Jack HTJ064-04A 02

JK301 DIN Connector JACK5P YKF51-5050NMIDI IN

01

JK301 DIN Connector 5P HDC-052S-01 01

JK302 DIN Connector JACK5P YKF51-5050NMIDI OUT

01

JK302 DIN Connector 5P HDC-052S-01 01

JK303 Phone Jack black JACK YKB21-5014SUSTAIN

01

JK303 Phone Jack black JY-6314-01-020

L0201 Jumper Wire 0.55 TIN (VA07890)

L0202 Jumper Wire 0.55 TIN (VA07890)

R0101 Carbon Resistor 47K 1/6W J




R0103 Carbon Resistor 3.3K 1/6W J




R0109 Carbon Resistor 47K 1/6W JR0109 Carbon Resistor 47K 1/6W J









R0205 Carbon Resistor 470 1/6W J


R0206 Carbon Resistor 470 1/6W JR0206 Carbon Resistor 470 1/6W J





R0211 Flame Proof C. Resistor 2.2 1/4W J 01

R0212 Flame Proof C. Resistor 2.2 1/4W J 01

VV437800

VB941200

VD631600

VV437800

VB941200

VD631600

VV437800

VB941200

VD631600

VV437800

VB941200

VD631600

VV437800

--

X5887A00

XV771A00

WA645200

LB302260

V6557600

LB101870

VV943300

VJ107200

VZ085800

VJ107200

VZ085800

VC687500

WE245200

--

--

V2551200

HF457470

V2550500

HF457120

V2549800

HF456330

V2550700

HF457180

V2551200

HF457470

V2550100

HF456560

V2550100

HF456560

V2550000

HF456470

V2550000

HF456470

V2548800

HF455470

V2548800HF455470

V2548000

HF455100

V2548000

HF455100

WD556700

WD556700

PNAM

PSR-E213/YPT-210


36/37

RANKQTYREMARKSDESCRIPTION REF NO. PART NO.R0304 Carbon Resistor 47K 1/6W J


R0305 Carbon Resistor 1.0K 1/6W JR0306 Carbon Resistor 22K 1/6W J






TR101 Transistor 2SB1342 02

TR102 Transistor 2SC1740S R,S 01

TR102 Transistor 2SC5395-T112-E/F/G

TR102 Transistor KTC3199 GR,BL







WH103 Cable PN3 (WE15580)

WH104 Connector Assembly PN (WE15550)

WH201 Cable SP (WE67670)

WH202 Cable SP (WE67670)



WH401 Wiring Assembly GND1 U only (WK56320)

20 Speaker 4ohm 3W 2 04

190 LCD TTR7994DPTDCN-C3 06

s AC Adaptor PA-3C J J

s AC Adaptor PA-3C CHN O 07

HF457470

V2549200

HF456100

V2550800

HF457220

V2550800

HF457220

V2549200

HF456100

WD926900

IC174070

WE435900

WE436000

IC174070

WE435900

WE436000

IC174070

WE435900

WE436000

--

--

--

--

--

--

--

X3804A00

WD570700

V8028600

WF322000

PNAM

PSR-E213/YPT-210PSR-E213/YPT-210OVERALL CIRCUIT DIAGRAM 1

B C D E F G H I J K LA

1

C

MASK ROM 32M

PROGRAM/WAVEMR27T3202L


37/37

PSR-E213/YPT-210 PSR-E213/YPT-210

2

B C D E F G H I J K LA

3

4

5

6

7

8

9

2

3

4

5

6

7

8

9

RH5RZ25CA (X3679A00)

REGULATOR +2.5VDMLCD: IC401

1

32

1: GND

2: INPUT

3: OUTPUT

BA33BC0FP (X5889A00)REGULATOR +3.3VDMLCD: IC402

1: INPUT

2: GND

3: OUTPUT

1

2

3

REGULATOR +5VPNAM1/2: IC101

BA50BC0T (X5887A00)

12

3 3: OUTPUT2: GND1: INPUT

XX : Not i ns ta ll ed

: Semiconductive Ceramic Capacitor

: Metal Film Resistor

Note: See parts list for details of circuit board component parts.

: Mylar Capacitor

: Ceramic Capacitor

WARNINGComponents having special characteristics are marked and must be replaced with parts havingspecifications equel to those originally installed.

MK-H

MK-L(C1~B3)

(C4~C6)

DMLCD

SYSTEM

RESET

SWL01

XX

XX XX

LCD DRIVER

XX

REGULATOR

+3.3V

REGULATOR

+2.5V

28CC1-8834620 1

POWER AMP PNAM 1/2

PHONES /

OUTPUT

SPEAKER L

DC IN 12V

BATTERYS

AC ADAPTORPA-3B/3C

28CC1-8834619 3

XX

REGULATOR +5V

XX

SPEAKER R

28CC1-8834619 3

PNAM 2/2

SUSTAIN

IN

MIDI

OUT

MIDI I/F

MK-L, MK-H: 28CC1-8819596

DAC

OP AMP

Atreset

XX

Documents

Yamaha_psr-e213 (Diagrama de Circuito)