YAMAHA XT1200 Super Teneré - Touratech Catalog

495MFYamaha XT1200Z

YamahaXT660 - XT1200Z

Nick Plumb / TT-UK / Wales

SPECIAL PARTS

497496

GPS Handlebar Bracket AdapterYamaha XT1200Z Super Ténéré

The bracket adapter is simply fitted to the handlebar mounting clamps on your Yamaha.

Our GPS brackets all fit perfectly on its 12 mm brace. For easy, safe attachment of your GPS.With virtually no impairment of the view of the instruments.

046-0601

Windscreen Adjuster with GPS Mounting Bar

Our customers and industry insiders have been im-pressed with our current Desierto conversions for the BMW-GS and its universal windscreen adjuster. Now we also bring you a windscreen with a similar level of comfort for the Super Ténéré. The best thing is that you keep the standard windscreen, only now its tilt angle and height are steplessly adjustable. In ad-dition, it can be fitted in two different height ranges. And the cherry on top: there is also a steplessly height-adjustable bar for mounting a GPS device.

046-0622

Spoiler for Windscreen

This special spoiler for the windscreen is perfect for undertaking long, fast motorbike journeys in comfort. There is a significant reduction in turbulence and wind pressure against the helmet.

It simply fits onto the windscreen, and is secured using the snap closure. When going off-road, the spoiler is easy to remove in seconds.

046-0647 lockable

497496Yamaha XT1200Z

Aluminium Handlebar EndsYamaha XT1200Z Super Ténéré

Our handlebar ends are milled from a single piece of aluminium with a natural anodised finish. A small part with a big visual impact at both ends of the handlebar.- Natural anodised aluminium

046-0631

Handlebar Risers

The handlebar risers provide significant relief from your wrists and shoulders. In addition, it allows a more upright standing, which improves stamina and concentration when riding off road. In short, the handlebar risers improve the control of the motorcycle! The kind of increase we have specially adapted to the Super Ténéré and the height of 20 mm enables a simple installation, without the costly reconstruction of cables and wires.

046-5255

Windscreen, Handlebar

Kaoko Cruise Control, Mechanical Cruise Control XT1200ZThe original by the South African inventor!The Cruise control replaces the original handlebar end weights. The anti-slip knurled screw secures theaccelerator in position. This significantly reduces the strain on the right hand during long journeys. Thanks to the continuous adjustment, the accelerator can also be fixed to decelerate very gently - leaving you enough time to take your hand off the handlebar for a moment without immediately losing throttle.Despite that, the motorbike decelerates in a gentle and controlled way. This item is illegal in road traffic in Germany and could be dangerous if used incorrectly. We are unable to accept any responsibility for it. Use at the owner’s/rider’s own risk.330-0019

499498

Touratech Handprotectors GD,Yamaha XT1200Z Super Ténéré

Enclosed, virtually indestructible hand guards with special fitting set for the Super Ténéré 1200.Reliably protects riders hands and levers from damage.

040-6836 black040-6837 yellow040-6838 blue040-6839 red040-6840 white

Spoiler for TT-Hand Protectors GD

Colours for hand protectors and spoilers can be combined as you wish.

040-7301 black040-7302 yellow040-7303 blue040-7304 red040-7305 white

End CapsTouratech end caps let you create visual highlights in colours to match your bike.- Individually interchangeable with many hand protectors (M8), oil filler plugs and frame plugs- Made from colour anodised aluminium

040-5900 M6, gold anodized 040-5901 M6, red anodized 040-5902 M6, black anodized 040-5903 M6, titanium color anodized 040-5904 M8, gold anodized 040-5905 M8, red anodized 040-5906 M8 , black anodized 040-5907 M8 , titanium colour anodized 1 unit per pack. For handguards please order 2 pieces.


Front PanelYamaha XT1200Z Super Ténéré

The Super Ténéré is a feast for the eyes, that of course. Just below the lighthouse it has an empty space, in our opinion, all a bit ugly.

Therefore, we have developed specifically for the XT1200Z a front panel that fits like a glove to the contour and perfect impression. With it, the Super Ténéré looks a lot better from the front.

Material: Aluminum black anodized.

046-0651

Daytime Running LightsYamaha XT1200Z Super Ténéré

Increased safety and cool design now available for motorbikes too!

Unmissable – powerful – dominant – LEDayFlex

The LEDayFlex daytime running lights system that we use is accommodated in a specially developed metal body for optimum mounting on the Yamaha. We have combined advanced design and innovative lighting technology into a perfect unit.

Highlights at a glance:- 30 x longer lasting than an H7 bulb- A row of brilliant white lights- 5 lamps in one unit- Each lamp has 5 diodes and one high-power LED- Lentil-shaped, computer-designed lens- Metal housing protects lamp and gives best heat dissipation- Low power consumption at just 8 watts (approx.)

046-0650

LED Indicator ARROW

The sporty replacement for the originals. The indica-tors blend elegantly with the shape of the motor-cycle.Delivery includes all parts needed for mounting and a resistor to ensure that normal indicator frequency is maintained.

- Carries the E-test mark- Consisting of 1 kit (2 in front and 2 behind)

046-0611

Handlebar, Lighting, Indicator

501500

Auxiliary LightsYamaha XT1200Z Super Ténéré

Our auxiliary lights deliver considerable improve-ments in active and passive safety. Thanks to the high-tech lamps that are used, the road is much better illuminated at night. During the day, the clear-ly visible light pattern makes you and your motorbike much easier to see. The fog light ensures signifi-cantly better close range visibility in hazy and foggy conditions. The Xenon headlight, which operates in tandem with the full beam headlight, provides far brighter illumination. The auxiliary headlights are available separately, but are perfect as a twin-pack. Carries the E-test mark.

046-0636 Fog light right046-0634 Fog light left046-0638 Xenon headlight

Stainless Steel Headlight Protector Yamaha XT1200Z Super Ténéré

Especially on gravel roads, headlights are always at risk of being damaged by stones thrown up by the vehicle in front. Touratech’s stainless steel headlight protector effectively prevents larger stones from damaging the headlight lens. The latticework creates a rugged off-road look and considerably modifies the bike’s appearance. As well as being a practical product made from laser-cut black stainless steel, it also matches the style of a touring enduro.Another great feature is the quick release fastener that lets you easily clip on the headlight protector and de-tach it again as needed. And of course the protector comes with everything you need to fit it.

046-5095


Dirk Schäfer / Germany

Neopren Fork Protector

Neither fork disassembly nor tools are necessary for installation.The fork protectors are simply wound around the stanchions and the Velcro strap closed. The ends are then attached by cable ties to the sliding tube.

044-2102

End Caps AnodisedYamaha XT1200Z Super Ténéré

Touratech end caps let you create visual highlights in colours to match your bike.

- Individually interchangeable with many hand protectors, oil filler plugs and frame plugs.- Made from colour anodised aluminium.

046-5190 anodized gold 046-5191 anodized red 046-5192 anodized black 046-5193 anodized titanium colour

Lighting, End Caps

503502

046-0628

048-0132

Manifold Protection Guards

When riding off-road, the manifolds are defenceless against flying stones and debris. Now we can supply two guards to protect the pipework on the XT1200Z. The flexible cover is a universal product that has pro-ved its effectiveness on many different models. The „manifold guard, bottom right“, on the other hand, has been specially developed for the Super Ténéré. With these accessories, you can be assured longer lasting protection.

046-0628 Manifold guard, bottom right048-0132 Manifold guard, flexible, universal

Lambda Sensor CoverYamaha XT1200Z Super Ténéré

Where as damage to the manifold is generally only cosmetic, a damaged lambda sensor will definitely put a dent in your wallet when your bike has its next emissions test. A good enough reason to protect the sensitive sensor with a solid cover.

046-0629


Pic.: Ramona Schwarz / TT-Marketing / Germany

Rear Brake Reservoir GuardYamaha XT1200Z Super Ténéré

Our cover protects the plastic brake fluid reservoir behind an elegant finish. Its special design almost completely surrounds the reservoir, which otherwise is exposed. The cover shields the reservoir from flying dirt and stones. With additional length at the bottom for that little extra protection!

046-0670

Oil Filler PlugYamaha XT1200Z Super Ténéré

Certain unsavoury characters might have stupid ideas in their heads, but they rarely have an Allen key in their pocket. So use our hex socket oil filler plug to protect the engine oil in your Super Ténéré against any unwanted “additives” – and it will defini-tely have a positive influence on the appearance of the engine block.

046-0646

Manifold Protection Guard, Oil Filler Plug

505504

Long-Distance Foot PegsYamaha XT1200Z Super Ténéré

Difficult terrain and bumpy tracks require the rider to stand up over long distances. To achieve perfect traction between your boots and pegs, these provide further stability to reduce muscle strain. Fit our serrated super-wide long-distance foot pegs to your Super Ténéré.

046-0626

Brake Pedal Extension

You wear sturdy boots when riding off-road. They offer good protection, but they seriously limit what you can feel through the sole. It seems the people at Yamaha didn’t think about this when they designed their foot brake lever. Touratech has designed this large, serrated foot brake pedal extension so you can safely stop your Super Ténéré – even if you’re wearing mud-encrusted cross boots.

046-0607

Heel Protector Right/LeftYamaha XT1200Z Super Ténéré

The simple sheet-metal original shields offer only limited protection on unpaved roads. We’ve develo-ped a heel protector that meets the highest standards of both functionality and appearance so that you’re truly prepared for anything.

Made from a material mix of resilient stainless steel and lightweight black anodised aluminium that will withstand just about anything, they also add a visual accent. This will make your Super Ténéré even more perfect!

046-0640 left046-0642 right


Crash Bars *Stainless Steel*

Even minor falls can badly damage your Yamaha Super Ténéré tank and fairing. Repairing or replacing the tank or fairing is very expensive. Minimise the risk and use our extremely rugged Touratech crashbar.The lines and forms of the refined Yamaha Super Ténéré have been used again and incorporated beautifully into the whole appearance of the motor cycle. In spite of the fact that they are so good to look at, they are certainly one of the best crash bars on the market.

The crash bars are made of non-rust stainless steel. The XT1200Z really needs this high-quality, refined material. It is very easy and quick to fit. Most necessary maintenance work can be done without removing the crash bars.- 25/18 mm stainless steel tubing- Fittings included

046-5160

Engine Guard, Large

We’ve incorporated the experience gained at countless rallyes in the large engine guard for the Super Té-néré. The engine guard, which was designed specifically for the Super Ténéré, distributes any shocks and loads over the entire engine block. The angled front makes it much easier to glide over stones, rocks and uneven road surfaces.

The base plate of the engine guard is made of 3 mm aluminium sheet, reinforced by 2 mm stain-less steel sheet. Rivets create a visually appeal-ing, sturdy and highly resistant connection of the individual parts.

The brackets are also made of indestructible stainless steel. The engine guard can easily be attached with our crash bars.

046-5135

Crash Bars, Engine Guard, Footpegs

507506

Side Stand Base ExtensionYamaha XT1200Z Super Ténéré

In the sorts of places where you’d ideally park an adventure bike, tarmacked parking spaces are hard to find. Parking a bike off-road is only a pleasant experience if the conditions are right. A side stand base extension makes life easier, saving you the strenuous effort of lifting the fully laden machine.

046-0603

Side Stand Folding AidYamaha XT1200Z Super Ténéré

This small and extremely practical folding down aid helps you to fold down the side stand. It effectively prevents you from slipping off the side stand with your boot. Particularly useful for short and unexpec-ted stops. Simple but clever!

049-0129

Side stand Switch ProtectorYamaha XT1200Z Super Ténéré

The side stand switch often goes completely unnoticed. It’s only when it stops working and the bike keeps refusing to start that you realize just how important this component is.

So we’ve made a stainless steel protector for the side stand switch. It’s effective and matches the enginee-ring quality and design of the Super Ténéré.

046-5105


Rear Axle Cover, Left-Hand SideYamaha XT1200Z Super Ténéré

Some details on a motorbike are barely noticeable on their own, and yet they are essential for creating a coherent overall appearance. One such product is our cover for the rear axle – a little aluminium adornment that’s milled from a single piece.

046-0645

ABS Sensor Protection (Set)Yamaha XT1200Z Super Ténéré

ABS cannot function without information about the wheel speed. Proper protection for the sensitive wheel speed sensors is therefore essential, especially on machines that often travel on rough ground. We have developed a made-to-measure set of protectors for the front and rear wheels on the Super Ténéré.

046-0630

Drive Shaft Crash BungsYamaha XT1200Z Super Ténéré

Our Touratech crash bung protects the drive shaft against expensive damage in the event of a fall.Thanks to its solid construction, the crash bung absorbs the forces and reliably protects the drive shaft tunnel against damage caused by contact with the road surface.

046-5051

Side Stand, Crash Bungs

509508


Carbon Exhaust Heat Shield

The big exhaust heat shield not only fulfils its pur-pose, it also imparts a thoroughbred appearance to your Yamaha Super Ténéré. It’s made from light carbon and anodised aluminium. As opposed to the OEM heat shield, it combines top-quality materials and a thoroughbred appearance with a reduction in weight.

- Simple, uncomplicated exchange for the original shield- Uses the original screws

046-5055

Side Panel SetYamaha XT1200Z Super Ténéré

Discreet in appearance yet highly effective, the Tou-ratech side panels for the Yamaha XT1200Z Super Ténéré provide excellent protection against water, mud and stones.

Save yourself and your luggage from all that muck chucked up off the road!

- Made of sturdy plastic- Easy to fit

046-5435



Mudguard FlapYamaha XT1200Z Super Ténéré

- Effective mudguard flap for the rear wheel- Your back and your luggage stay clean- Also serves as a number plate reinforcement- Aluminium plate with black plastic coating

046-0600

Side Panels, Mudguard

Luggage Rack

Our luggage rack is a solid bit of kit. The laser-cut aluminium plate bolts onto the existing mounting points above the rear mudguard. With belt slots all the way round, you can securely tie down even bulky luggage.

046-0612

Original Luggage Plate Height Adjusting Adapter

The original luggage plate on the Super Ténéré can also be fitted without its underframe or the pillion seat to provide a continuous surface for loading with luggage. But in order to do this, unfortunately, the pillion handles have to be removed. Our raiser adapter raises up the plate a little so that you no lon-ger need to remove the pillion handles. Can also be fitted in conjunction with 046-0616 (luggage rack for pillion seat).

046-0633

511510

Waterprotected

WATERPROTECTED

Luggage Rack for Pillion Seat

A single seat with the luggage rack brought forward to the passenger seat – this is a solution which has proven itself on extreme trips and which we can now offer for the Super Ténéré. Heavy luggage is shifted closer to the bike’s centre of gravity, significantly improving handling on tricky roads. A must-have for individualists and globetrotters.

046-0616

Tail Bag for Pillion Seat

Go for a ride on your own once in a while – our rear pannier is the perfect companion and straps to the pillion seat where it is closer to the centre of gravity. The lowdown: - Waterproof zips, two-part design (base plate can stay on the seat)- Secured via two zips- Elastic band on the top – e.g. for gloves- Tabs for extra straps- Carry-straps so you can use the bag as a rucksack, and reflective trim.

Made from Teflon-coated CORDURA which is both water-repellent and dirt-resistant. Made in Germany by KAHEDO.

Dimensions (l x w x h): approx. 30 x 33 x 21 cm. Volume: approx. 20 litres.

055-1219


Waterprotected

Waterprotected

Waterprotected

Tank Bag, “Black Edition”XT1200Z *waterproof*The “Black Edition” tank bag packs an array of clever detail solutions: an aerodynamically optimised map pocket, document compartment with separate credit card pouch in the top cover, waterproof zips and two practical side pockets. Reflective panels lend the finishing touch to this black tank bag, which is made from completely waterproof PVC-coated polyester fabric.

Size: (l x w x h) approx. 35 x 26 x 18 / 25 cm. Volume: approx. 16/22 litres.

Colour: black

- Suitable for all model years! Made in Germany by KAHEDO.

046-5803

Water Protected Tank BagYamaha XT1200Z Supertenere

The tank bag for the new Super Ténéré is sheer elegance combined with outstanding functionality.

Features:• Basic shape fits the Yamaha Super Ténéré perfectly• Made from Teflon-coated CORDURA which is both

waterproof and dirt-resistant• Waterproof zips• Two slim side pockets for your wallet, various

papers or a multitool• Document compartment with separate credit card

pouch in the top cover• Map pocket holds maps up to A4 size• Zip to expand volume from 14 to 20 litres

The tank bag attaches quickly with two clip-buckles at the front and a Velcro panel on the back.The two additional straps can be used when riding off-road or with a heavy load. And the tank bag can still be worn as a rucksack using the supplied straps.

Dimensions: (l x w x h) 30 x 26 x 17 / 25 cmCapacity: approx. 14 / 20 litres

055-1197

Luggage Racks, Tank Bags

513512

ZEGA Pro Topcase RackYamaha XTZ1200Z

The special carrier for our ZEGA Pro Topcases!

Made entirely of stainless steel and specifically designed for the Yamaha attachment points, the Topcase rack is the perfect way to attach ZEGA Pro Topcases to your bike. The Topcase rack can be used on its own or in conjunction with our pannier system. You will find the available Topcases on page 1074 and the following.

046-0610

Pannier Rack XT1200Z

Perfectly matched to the bike’s geometry, the stain-less steel rack clings closely to the Super Ténéré’s rear frame. For punishing off-road conditions this means less leverage, which reduces the stress on the rack and the tail of the bike. A choice of ZEGA Pro panniers are available with an aluminium or black anodised »AND-Black« finish.

051-0185

Extra Bag under the ZEGA Pro TopcaseLuggage Rack

For design reasons, some of our ZEGA Pro Topcase luggage racks have a space between the carrier plate and the rear light. This space needn’t go to waste! Our extra bag adds four litres of additional storage space. The bag is specially designed to fit perfectly beneath the luggage rack. It offers space for all the smaller items you need, such as spare gloves, a first aid kit, or a tool roll. Colour: black. Dimensions: approx. 20 x 22 x 9 cm. Volume: approx. 4 litres.Made of Teflon-coated CORDURA, therefore water-repellent and dirt-resistant.

044-5814


104 cm96 cm

31 38 38 45

ZEGA Pro Aluminium Pannier System

The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.

The anodised version of the ZEGA Pro doesn‘t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.

The rack is made of 18 mm steel tubing and is attached to existing mounting points. Pillion comfort not restricted in any way.

Aluminium pannier system, premounted.

For more details on the ZEGA Pro panniers see page 1067 and the following.

Yamaha XTZ1200Z 31/38 litres

ZEGA Pro 052-3611

ZEGA Pro AND-S 052-3612

ZEGA Pro AND-Black 052-3613

Yamaha XTZ1200Z 38/45 litres

ZEGA Pro 052-3614

ZEGA Pro AND-S 052-3615

ZEGA Pro AND-Black 052-3616

Aluminium Pannier Systems

Documents

YAMAHA XT1200 Super Teneré - Touratech Catalog