Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
L2000Y Series | L2600Y Series | L3000Y Series
HYUNDAI WIA Multi-Tasking Y-Axis CNC Turning Center
Y Series
Technical Leader ▶The CNC Turning Center L-SY Series, designed with HYUNDAI WIA's engineering expertise to maximize productivity by enhancing rigidity and accuracy of machining.
ModeLMain Chuck Sub Chuck Bed
8″ 10″ 12″ 6″ Short Standard Long
L2000Y ● ●
L2000SY ● ● ●
L2000LY ● ●
L2000LSY ● ● ●
L2600Y ● ●
L2600SY ● ● ●
L2600LY ● ●
L3000Y ● ●
L3000SY ● ● ●
L3000LY ● ●
● Cycle time reducing structure for maximum productivity
● Multi-tasking operation with wedge type Y-axis BMT65 turret
● Integrated processing through synchronized control of Main/Sub spindle (‘S’ Type)
● High performance heavy duty cutting enabled with box guideways
● Main/Sub Built-in Spindle application for high precision processing
Y SeriesLathe with Y-axis & Box Guideways for Heavy Cutting
EXPERIENCE THE NEW TECHNOLOGY
High Precision Spindle
Sub Spindle
Mill Turret
- Integral body & heat dissipating RIB structure.
- L2000Y Series : 8″ / 4,000 r/min- L2600Y Series : 10″ / 3,500 r/min- L3000Y Series : 12″ / 3,500 r/min- C-Axis Control : 0.001°
- 6″ / 4,500 r/min- C-Axis Control : 0.001°
- BMT65 5,000 r/min, Ø25 (Ø1″) {ER32}
01
MT#5 Quill Tail StockThe L-Y series is fitted with tailstocks as a standard for excellent machining quality. In addition, the travel distance of quill can be as long as 120mm(4.7″), thus expanding the support area.
(NC tail stock can be moved separately, providing convenience during workpiece setup. : Option)
L-Y
Se
rie
s
BASIC Structure Which Can Cover All Machining Process with Only One Initial Setting
04+05
L-Y Series
CNC Turning Center
EXPERIENCE
THE NEW TECHNOLOGY
HYUNDAI WIA
MACHINE TOOL
REDUCTION OF NON-CUTTING TIME BY FAST RAPID SPEED
ALL-IN-ONE TYPE OF BEDHigh Precision & Rigidity, One-Piece StructureDesigned with FEM(Finite Element Method) analysis, the L500 Series has bed structure of 30° slope to improve machining accuracy and cutting ability.In addition, increased bed installation area improves vibration absorption and machining stability.
Structure
Bed Slant 30̊
GUIDEWAYBox GuidewayAll axes of L-Y Series are designed with Box Guideways for better travel ability. Box Guideways show great performance in offsetting vibrations caused by heavy duty cutting.
Ball ScrewLarge diameter ball screws with preloading prevent deformation due to heat. Also double-anchor suppport method improves rigidity.
rapid traverse rate (X/Y/Z)
30/10/30 m/min (1,181/294/1,181/1,181 ipm)
travel (X/Y/Z)
L2000Y/SY L2000LY/LSY
265/120/590 mm (10.4″/4.7″/23.2″)
265/120/830 mm (10.4″/4.7″/32.7″)
L2600Y/SY | L3000Y/SY L2600LY | L3000LY
265/120/830 mm(10.4″/4.7″/32.7″)
265/120/1,350 mm(10.4″/4.7″/53.1″)
02
Spindle SpecificationsModel Spindle Speed Motor (Max./Cont.) Torque (Max./Cont.) Chuck Size
L2000Y Series5,000 rpm (Built-in) 22/11 kW (30/15 HP) 358/301 N・m (264/222 lbft・ft)
8″[4,500 rpm (Belt)] [18.5/11 kW (25/15 HP)] [314.2/186.2 N・m (231.7/137.3 lbft・ft)]
L2600Y Series4,000 rpm (Built-in) 22/15 kW (30/20 HP) 599/409 N・m (441.8/301.7 lbft・ft)
10″[3,500 rpm (Belt)] [26/18.5 kW (35/25 HP)] [733.7/522.1 N・m (541.1/385.1 lbft・ft)]
L3000Y Series3,000 rpm (Built-in) 37/25 kW (50/33.5 HP) 1,262/1,003 N・m (930.8/739.8 lbft・ft)
12″[2,800 rpm (Belt)] [26/18.5 kW (35/25 HP)] [1,123/664 N・m (828.2/489.7 lbft・ft)]
Sub Spindle6,000 rpm (Built-in) 15/11 kW (20/15 HP) 135/99.1 N・m (99.6/73.1 lbft・ft)
6″[4,500 rpm (Belt)] [11/5.5 kW (15/7.4 HP)] [124/62.1 N・m (91.5/45.8 lbft・ft)]
L-Y
Se
rie
s
Long Lasting, High Accuracy & Excellent Performance CNC Turning Center
HIGH PRECISION SpindLe
[ ] : Option
06+07
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
Spindle
EXPERIENCE
THE NEW TECHNOLOGY
BELT TYPE MAIN SPINDLEBelt type main spindle has a wide torque range and it is designed to minimize thermal displacement. This enables accurate machining during high speed constant processing.
The belt-type sub spindle with 6" chuck is designed to minimize thermal displacement during long duration continuous machining and from heavy-duty cutting to high-speed processing.
SPINDLEBuilt-In Main SpindleBuilt-in type spindle reduces noise, heat and vibration effectively at high speed rates. Also, rapid acc./deceleration reduces non-cutting time leading to higher productivity..
C-Axis ControlC-axis of L-Y Series can be controlled to 0.001° which makes it possible to process various shapes.
Built-In Sub Spindle (‘S’ Type)The "S" Type built-in sub-spindle has 6" sub-chuck, which enlarges the machining area and improves the workability of the sub spindle with the C-axis control.
When the main spindle cutting is completed, the sub spindle rotation is synchronized with the main spindle allowing the workpiece to be transferred to the sub spindle, and machining can begin on the back side of the workpiece.
0.001°
HEAVY DUTY CUTTING & HIGH ACCURACY
03
L-Y
Se
rie
s
Mill TurretITEM Speed Motor (Max./Cont) Torque (Max./Cont) Collet Size
BMT655,000 rpm (FANUC) 5.5/1.5 kW (7.4/2HP) 47.1/33.7 N・m (34.7/24.9 lbft・ft)
Ø25 (1″) / ER32[5,000 rpm (Power Up)] [7.5/1.5 kW (10/2HP)] [95.5/33.7 N・m (70.4/24.9 lbft・ft)]
no. of tools tool Size (O.D/i.D) indexing time
12 EA □25/Ø50 mm (□1″/Ø2″) 0.15 sec
High speed, High Accuracy, Highly Reliable Servo Turret
BMt TURRET
[ ] : Option
TURRETBMT65 TurretThe BMT turret secures the tool with four bolts and key on the tool mounting surface of the turret, making it possible to powerfully fix the tool, ensuring high reliability in rigidity and precision.
ANgULAr MILLINg HEADSTrAIgHT MILLINg HEAD
Mill Tool HolderMachining capability has increased with the addition of straight milling head tool holder, which can machine workpieces from the side, and angular milling head tool holder, which can perform I.D. operations.
08+09
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
Special Tool
With the Y-axis, the L-Y series can process high value-added products using a variety of rotating tools. In particular, there is a multi-holder for attaching a variety of tools to one holder, and an eccentric rotary tool for handling eccentric parts without additional axis travel, which can realize integration of process with one machine.
❖ Consultation needed when ordering these options.
Y-AXISWedge Type Y-Axis StructureThe HD-SY Series is designed with a wedge type Y-axis that is transferred by the simultaneous operation of the Ys-axis and the X-axis. In addtion, excellent rigidity makes it possible to perform superb quality when machining a heavy-duty cutting.
Y-axis Rapid Traverse Rate : 10 m/min
Y-axis Travel : 120 {±60} mm (4.7″{±2.4″})
X-Axis
Ys-Axis
Y-Axis
Turret
VARIOUS DRIVEN PRECISION BMT TOOL HOLDERS
The Compatible All-round Control
HYundAi WiA FAnuc - SMART PLUS
15″ Touch-type Monitor as a standard
Smart Machine Control
Fast Cycle Time Technology
Fine Surface Technology
Smart Servo Control Technology
Conversational Program Smartguide-i
i-HMI Machining-aid Function
Part Program Storage 5120M (2MB)
No. of Registerable Programs 1000 EA
04
L-Y
Se
rie
s
1. Thermal Displacement Compensation (HW-TDC) This software improves processing precision by minimizing thermal deformation from changes in external environments and machining.
2. Machine Guidance (HW-MCG)This software offers various user convenience functions such as tool manipulation, maintenance, tool monitoring, and a pop-up/status
3. LAUNCHERThis software offers shortcuts for quick access to specialized features and frequently used features.
4. Tool Monitoring (HW-TM) This tool status monitoring software monitors and protects workpiece, tools, and equipment through real-time monitoring of the motor load from machining.
1. Premium Tool OperationThis software offers premium graphic functions for more intuitive tool operation.
2. Manual ViewerThis software enables users to view electronic manuals right from the tool.
3. SchedulingThis software enables viewing/setting up directly from the tool. This allows such actions as managing customer’s tool schedules and schedule notification.
4. Operation MemoThis software is capable of managing customer notes such as tool information and issues.
SMART SOFTWARE
Convenience Function S/W
Machining Support S/W
1 2
3 4
1 2
3 4
Dialogue Program (Smart Guide-i)This software offers the maximum user convenience through dialogue manipulation from setup to processing. This includes writing processing programs and simulation checks.
FANUC
HYundAi WiA FAnuc - SMART PLUS
10+11
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
Spindle L2000Y/LY L2000SY/LSY
Main SpindleHollow Chuck 3 Jaw 8″ ● ●
Main SpindleSolid Chuck 3 Jaw 8″ ☆ ☆
Sub SpindleHollow Chuck 3 Jaw 6″ - ●
Sub SpindleSolid Chuck 3 Jaw 6″ - ☆
Standard Soft Jaw (1set) ● ●Chuck Clamp Foot Switch ● ●2 Steps Hyd, Pressure Device ○ ○Spindle Inside Stopper ☆ ☆5° Index ☆ ☆Cs-Axis (0.001°) ● ●2 Steps Chuck Foot Switch ○ ○Chuck Open/Close Confirmation Device ○(CE:●) ○(CE:●)Sub Spindle Foot Switch - ●TurretTool Holder ● ●Mill Turret BMT ● ●Straight Milling Head (Radial) Collet Type,2ea ● ●Angular Milling Head (Axial) Collet Type,2ea ● ●Straight Milling Head (Radial) Adapter Type ○ ○Angular Milling Head (Axial) Adapter Type ○ ○Boring Sleeve ● ●Drill Socket ● ●U-Drill Holder ○ ○U-Drill Holder Sleeve ○ ○O.D Extension Holder For Out-Dia ☆ ☆Angle Head ☆ ☆Tail Stock & Steady RestProgrammable + Quill Tail Stock(MT#5) ● -Programmable + Built-in Tail Stock(MT#4) ○ -NC Feed + Quill Tail Stock(MT#5) ○ -NC Feed + Built-in Tail Stock(MT#4) ○ -Manual Hyd. Steady Rest ☆ ☆Programable Hyd. Steady Rest ○/☆ ○/☆Standard Live Center ● -High Precesion Live Center ○ -2 Steps Tail Stock Pressure System ☆ -Tail Stock Foot Switch (When Tail Stock is selected) ● -Quill Forward/Reverse Confirmation Device ○ -Coolant & Air BlowStandard Coolant (Nozzle) ● ●Chuck Coolant (Upper Chuck) ○ ○Gun Coolant ○ ○Through Spindle Coolant (Only for Special Chuck) ☆ ☆Turnmill Through Coolant - -Chuck Air Blow (Upper Chuck) ○ ○Sub Spindle Air Blow - ○Tail Stock Air Blow (Upper Tail Stock) ☆ -Turret Air Blow ☆ ☆Air Gun ○ ○Through Spindle Air Blow (Only for Special Chuck) ☆ ☆
High Pressure Coolant6Bar (87psi) ● ●20Bar (290psi) ○ ○70Bar (1,015psi) ○ ○
Power Coolant System (For Automation) ☆ ☆
Coolant Chiller(When selecting Sub Tank Type, Chip Conveyor) ☆ ☆
Chip Disposal
Coolant Tank275ℓ(72.6 gal) ●/- ●/-290ℓ(76.6 gal) -/● -/●
Chip Conveyor(Hinge/Scraper)
Front (Right) ○ ○Rear (Rear) ○ ○
Special Chip Conveyor (Drum Filter) ☆ ☆
Chip Wagon
Standard (180ℓ) ○ ○Swing(200ℓ) ○ ○Large Swing (290ℓ) ○ ○Large Size (330ℓ) ○ ○Customized ☆ ☆
Safety DeviceTotal Splash Guard ● ●Chuck hydraulic pressure maintenance interlock ○(CE:●) ○(CE:●)
Electric Device L2000Y/LY L2000SY/LSY
Call Light 1Color : ■ ● ●Call Light & Buzzer 3Color : ■■■B ○ ○Electric Cabinet Light ○ ○Remote MPG - -Work Counter Digital ○ ○Total Counter Digital ○ ○Tool Counter Digital ○ ○Multi Tool Counter Digital ○ ○Electric Circuit Breaker ○ ○AVR (Auto Voltage Regulator) ☆ ☆
Transformer40kVA ○ -40kVA (Belt) - ○60kVA (Built-in) - ○
Auto Power Off ○ ○MeasurementManual Q-Setter - -Automatic Q-Setter ● ●Work Close Confirmation Device(Only for Special Chuck)
TACO ○ ○SMC ○ ○
Work Setter ☆ ☆
Linear ScaleX axis ☆ ☆Z axis ☆ ☆
Coolant Level Sensor (Only for Chip Conveyor) ☆ ☆EnvironmentAir Conditioner ○ ○Oil Mist Collector ☆ ☆Oil Skimmer (Only for Chip Conveyor) ○ ○MQL (Minimal Quantity Lubrication) ☆ ☆Fixture & AutomationAuto Door High Speed ○ ○Auto Shutter (Only for Automatic System) ☆ ☆Sub Operation Pannel ☆ ☆Bar Feeder Interface ○ ○Bar Feeder (FEDEK) ☆ ☆Sub Sp. Work Eject (Pneumatic Type) - ○Sub Sp. Work Pusher (Spring Type) - ○Turret Work Pusher (For Automation) ☆ ☆Extra M-Code 4ea ○ ○Automation Interface ☆ ☆
I/O Extension (IN & OUT)16 Contact ○ ○32 Contact ○ ○
Parts CatcherMain SP. ○ ○Sub SP. - ○
Parts Conveyor(Need to Main Part Catcher) ☆ ☆Front Loading Semi Automation ☆ ☆Hyd. DeviceStandard Hyd. Cylinder Hollow ● ●
Standard Hyd. Unit 35bar(507.6psi) / 14ℓ ● ●
S/W
Conversational programSmartGuide-i ● ●HW-DPRO ○ ○
Thermal Displacement Compensation (HW-TDC) ○ ○Tool Monitoring (HW-TM) ○ ○Machine Guidance (HW-MCG) ● ●Energy Saving System (HW-ESS) ● ●DNC software (HW-eDNC) ○ ○Machine Monitoring System (HW-MMS) ○ ○Thermal Displacement Compensation Device ○ ○Premium Tool Operation ● ●Manual Viewer ● ●Scheduling ● ●Operation Memo ● ●ETC Tool Box ● ●Customized Color Need Munsel No. ☆ ☆CAD & CAM ☆ ☆
Standard & optional
Specifications are subject to change without notice for improvement.
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
❖ 4 channel of TDC(Thermal Displacement Compensation) device is recommended, when more than 6 bar of high pressure coolant is applied, for the high quality machining.
SpeciFicAtionS
Standard & optional
Specifications are subject to change without notice for improvement.
Spindle L2600Y/LY L2600SY
Main SpindleHollow Chuck 3 Jaw 10″ ● ●
Main SpindleSolid Chuck 3 Jaw 10″ ☆ ☆
Sub SpindleHollow Chuck 3 Jaw 6″ - ●
Sub SpindleSolid Chuck 3 Jaw 6″ - ☆
Standard Soft Jaw (1set) ● ●Chuck Clamp Foot Switch ● ●2 Steps Hyd, Pressure Device ○ ○Spindle Inside Stopper ☆ ☆5° Index ☆ ☆Cs-Axis (0.001°) ● ●2 Steps Chuck Foot Switch ○ ○Chuck Open/Close Confirmation Device ○(CE:●) ○(CE:●)Sub Spindle Foot Switch - ●TurretTool Holder ● ●Mill Turret BMT ● ●Straight Milling Head (Radial) Collet Type,2ea ● ●Angular Milling Head (Axial) Collet Type,2ea ● ●Straight Milling Head (Radial) Adapter Type ○ ○Angular Milling Head (Axial) Adapter Type ○ ○Boring Sleeve ● ●Drill Socket ● ●U-Drill Holder ○ ○U-Drill Holder Sleeve ○ ○O.D Extension Holder For Out-Dia ☆ ☆Angle Head ☆ ☆Tail Stock & Steady RestProgrammable + Quill Tail Stock(MT#5) ● -Programmable + Built-in Tail Stock(MT#4) ○ -NC Feed + Quill Tail Stock(MT#5) ○ -NC Feed + Built-in Tail Stock(MT#4) ○ -Manual Hyd. Steady Rest ☆ ☆Programable Hyd. Steady Rest ○/☆ ☆Standard Live Center ● -High Precesion Live Center ○ -2 Steps Tail Stock Pressure System ☆ -Tail Stock Foot Switch (When Tail Stock is selected) ● -Quill Forward/Reverse Confirmation Device ○ -Coolant & Air BlowStandard Coolant (Nozzle) ● ●Chuck Coolant (Upper Chuck) ○ ○Gun Coolant ○ ○Through Spindle Coolant (Only for Special Chuck) ☆ ☆Turnmill Through Coolant - -Chuck Air Blow (Upper Chuck) ○ ○Sub Spindle Air Blow - ○Tail Stock Air Blow (Upper Tail Stock) ☆ -Turret Air Blow ☆ ☆Air Gun ○ ○Through Spindle Air Blow (Only for Special Chuck) ☆ ☆
High Pressure Coolant6Bar (87psi) ● ●20Bar (290psi) ○ ○70Bar (1,015psi) ○ ○
Power Coolant System (For Automation) ☆ ☆
Coolant Chiller(When selecting Sub Tank Type, Chip Conveyor) ☆ ☆
Chip Disposal
Coolant Tank290ℓ(76.6 gal) ●/- ●320ℓ(84.5 gal) -/● -
Chip Conveyor(Hinge/Scraper)
Front (Right) ○ ○Rear (Rear) ○ ○
Special Chip Conveyor (Drum Filter) ☆ ☆
Chip Wagon
Standard (180ℓ) ○ ○Swing(200ℓ) ○ ○Large Swing (290ℓ) ○ ○Large Size (330ℓ) ○ ○Customized ☆ ☆
Safety DeviceTotal Splash Guard ● ●Chuck hydraulic pressure maintenance interlock ○(CE:●) ○(CE:●)
Electric Device L2600Y/LY L2600SY
Call Light 1Color : ■ ● ●Call Light & Buzzer 3Color : ■■■B ○ ○Electric Cabinet Light ○ ○Remote MPG - -Work Counter Digital ○ ○Total Counter Digital ○ ○Tool Counter Digital ○ ○Multi Tool Counter Digital ○ ○Electric Circuit Breaker ○ ○AVR (Auto Voltage Regulator) ☆ ☆
Transformer40kVA ○ -45kVA (Belt) - ○60kVA (Built-in) - ○
Auto Power Off ○ ○MeasurementManual Q-Setter - -Automatic Q-Setter ● ●Work Close Confirmation Device(Only for Special Chuck)
TACO ○ ○SMC ○ ○
Work Setter ☆ ☆
Linear ScaleX axis ☆ ☆Z axis ☆ ☆
Coolant Level Sensor (Only for Chip Conveyor) ☆ ☆EnvironmentAir Conditioner ○ ○Oil Mist Collector ☆ ☆Oil Skimmer (Only for Chip Conveyor) ○ ○MQL (Minimal Quantity Lubrication) ☆ ☆Fixture & AutomationAuto Door High Speed ○ ○Auto Shutter (Only for Automatic System) ☆ ☆Sub Operation Pannel ☆ ☆Bar Feeder Interface ○ ○Bar Feeder (FEDEK) ☆ ☆Sub Sp. Work Eject (Pneumatic Type) - ○Sub Sp. Work Pusher (Spring Type) - ○Turret Work Pusher (For Automation) ☆ ☆Extra M-Code 4ea ○ ○Automation Interface ☆ ☆
I/O Extension (IN & OUT)16 Contact ○ ○32 Contact ○ ○
Parts CatcherMain SP. ○ ○Sub SP. - ○
Parts Conveyor(Need to Main Part Catcher) ☆ ☆Front Loading Semi Automation ☆ ☆Hyd. DeviceStandard Hyd. Cylinder Hollow ● ●
Standard Hyd. Unit 35bar(507.6psi) / 14ℓ ● ●
S/W
Conversational programSmartGuide-i ● ●HW-DPRO ○ ○
Thermal Displacement Compensation (HW-TDC) ○ ○Tool Monitoring (HW-TM) ○ ○Machine Guidance (HW-MCG) ● ●Energy Saving System (HW-ESS) ● ●DNC software (HW-eDNC) ○ ○Machine Monitoring System (HW-MMS) ○ ○Thermal Displacement Compensation Device ○ ○Premium Tool Operation ● ●Manual Viewer ● ●Scheduling ● ●Operation Memo ● ●ETC Tool Box ● ●Customized Color Need Munsel No. ☆ ☆CAD & CAM ☆ ☆
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
❖ 4 channel of TDC(Thermal Displacement Compensation) device is recommended, when more than 6 bar of high pressure coolant is applied, for the high quality machining.
SpeciFicAtionS
12+13
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
Standard & optional
Specifications are subject to change without notice for improvement.
Spindle L3000Y/LY L3000SY
Main SpindleHollow Chuck 3 Jaw 12″ ● ●
Main SpindleSolid Chuck 3 Jaw 12″ ☆ ☆
Sub SpindleHollow Chuck 3 Jaw 6″ - ●
Sub SpindleSolid Chuck 3 Jaw 6″ - ☆
Standard Soft Jaw (1set) ● ●Chuck Clamp Foot Switch ● ●2 Steps Hyd, Pressure Device ○ ○Spindle Inside Stopper ☆ ☆5° Index ☆ ☆Cs-Axis (0.001°) ● ●2 Steps Chuck Foot Switch ○ ○Chuck Open/Close Confirmation Device ○(CE:●) ○(CE:●)Sub Spindle Foot Switch - ●TurretTool Holder ● ●Mill Turret BMT ● ●Straight Milling Head (Radial) Collet Type,2ea ● ●Angular Milling Head (Axial) Collet Type,2ea ● ●Straight Milling Head (Radial) Adapter Type ○ ○Angular Milling Head (Axial) Adapter Type ○ ○Boring Sleeve ● ●Drill Socket ● ●U-Drill Holder ○ ○U-Drill Holder Sleeve ○ ○O.D Extension Holder For Out-Dia ☆ ☆Angle Head ☆ ☆Tail Stock & Steady RestProgrammable + Quill Tail Stock(MT#5) ● -Programmable + Built-in Tail Stock(MT#4) ○ -NC Feed + Quill Tail Stock(MT#5) ○ -NC Feed + Built-in Tail Stock(MT#4) ○ -Manual Hyd. Steady Rest ☆ ☆Programable Hyd. Steady Rest ○/☆ ☆Standard Live Center ● -High Precesion Live Center ○ -2 Steps Tail Stock Pressure System ☆ -Tail Stock Foot Switch (When Tail Stock is selected) ● -Quill Forward/Reverse Confirmation Device ○ -Coolant & Air BlowStandard Coolant (Nozzle) ● ●Chuck Coolant (Upper Chuck) ○ ○Gun Coolant ○ ○Through Spindle Coolant (Only for Special Chuck) ☆ ☆Turnmill Through Coolant - -Chuck Air Blow (Upper Chuck) ○ ○Sub Spindle Air Blow - ○Tail Stock Air Blow (Upper Tail Stock) ☆ -Turret Air Blow ☆ ☆Air Gun ○ ○Through Spindle Air Blow (Only for Special Chuck) ☆ ☆
High Pressure Coolant6Bar (87psi) ● ●20Bar (290psi) ○ ○70Bar (1,015psi) ○ ○
Power Coolant System (For Automation) ☆ ☆
Coolant Chiller(When selecting Sub Tank Type, Chip Conveyor) ☆ ☆
칩처리
Coolant Tank290ℓ(76.6 gal) ●/- ●320ℓ(84.5 gal) -/● -
Chip Conveyor(Hinge/Scraper)
Front (Right) ○ ○Rear (Rear) ○ ○
Special Chip Conveyor (Drum Filter) ☆ ☆
Chip Wagon
Standard (180ℓ) ○ ○Swing(200ℓ) ○ ○Large Swing (290ℓ) ○ ○Large Size (330ℓ) ○ ○Customized ☆ ☆
Safety DeviceTotal Splash Guard ● ●Chuck hydraulic pressure maintenance interlock ○(CE:●) ○(CE:●)
Electric Device L3000Y/LY L3000SY
Call Light 1Color : ■ ● ●Call Light & Buzzer 3Color : ■■■B ○ ○Electric Cabinet Light ○ ○Remote MPG - -Work Counter Digital ○ ○Total Counter Digital ○ ○Tool Counter Digital ○ ○Multi Tool Counter Digital ○ ○Electric Circuit Breaker ○ ○AVR (Auto Voltage Regulator) ☆ ☆
Transformer
40kVA (Belt) ○ -50kVA (Built-in) ○ -45kVA (Belt) - ○65kVA (Built-in) - ○
Auto Power Off ○ ○MeasurementManual Q-Setter - -Automatic Q-Setter ● ●Work Close Confirmation Device(Only for Special Chuck)
TACO ○ ○SMC ○ ○
Work Setter ☆ ☆
Linear ScaleX axis ☆ ☆Z axis ☆ ☆
Coolant Level Sensor (Only for Chip Conveyor) ☆ ☆EnvironmentAir Conditioner ○ ○Oil Mist Collector ☆ ☆Oil Skimmer (Only for Chip Conveyor) ○ ○MQL (Minimal Quantity Lubrication) ☆ ☆Fixture & AutomationAuto Door High Speed ○ ○Auto Shutter (Only for Automatic System) ☆ ☆Sub Operation Pannel ☆ ☆Bar Feeder Interface ○ ○Bar Feeder (FEDEK) ☆ ☆Sub Sp. Work Eject (Pneumatic Type) - ○Sub Sp. Work Pusher (Spring Type) - ○Turret Work Pusher (For Automation) ☆ ☆Extra M-Code 4ea ○ ○Automation Interface ☆ ☆
I/O Extension (IN & OUT)16 Contact ○ ○32 Contact ○ ○
Parts CatcherMain SP. ○ ○Sub SP. - ○
Parts Conveyor(Need to Main Part Catcher) ☆ ☆Front Loading Semi Automation ☆ ☆Hyd. DeviceStandard Hyd. Cylinder Hollow ● ●
Standard Hyd. Unit 35bar(507.6psi) / 14ℓ ● ●
S/W
Conversational programSmartGuide-i ● ●HW-DPRO ○ ○
Thermal Displacement Compensation (HW-TDC) ○ ○Tool Monitoring (HW-TM) ○ ○Machine Guidance (HW-MCG) ● ●Energy Saving System (HW-ESS) ● ●DNC software (HW-eDNC) ○ ○Machine Monitoring System (HW-MMS) ○ ○Thermal Displacement Compensation Device ○ ○Premium Tool Operation ● ●Manual Viewer ● ●Scheduling ● ●Operation Memo ● ●ETC Tool Box ● ●Customized Color Need Munsel No. ☆ ☆CAD & CAM ☆ ☆
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
❖ 4 channel of TDC(Thermal Displacement Compensation) device is recommended, when more than 6 bar of high pressure coolant is applied, for the high quality machining.
SpeciFicAtionS
14+15
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
Spindle output/torque diagram
SpeciFicAtionS
1,262
477
707
1,003
5.5kW [7.4HP] (15min)
7.5kW [10HP] (5min)
1.5kW [2HP] (Cont.) 33.7N·m
3,000
37
25
18.5
15
0 238 280 500
1,400
1,600
Spindle Speed (r/min)
Power (kW [HP]) Torque (N·m [lbf·ft]) Power (kW [HP]) Torque (N·m [lbf·ft])
Power (kW [HP]) Torque (N·m [lbf·ft])
Power (kW [HP])
Power (kW [HP]) Torque (N·m [lbf·ft])
Spindle Speed (r/min)
7.5
5.5
1.5
5,000567 750 3,000
1,115
0
Spindle Speed (r/min)
358
231
214
140
118
95.5
70
5344
301
5,000
22
18.5
15
11
0 400 490 620 1,500
358N·m [264lbf·ft] (S3 15%) 22kW [30HP] (S3 15%)
301N·m [222lbf·ft] (S3 25%) 18.5kW [25HP] (S1 Cont.)
15kW [20HP] (S3 30min)231N·m [170.4lbf·ft] (S3 30min)
214N·m [157.8lbf·ft] (S1 Cont.)11kW [15HP] (S1 Cont.)
4,000475
37kW [50HP] (S2 30min)
25kW [33.5HP] (Cont.)
1,262N·m [930.8lbf·ft] (S2 30min)
707N·m [521.5lbf·ft] (S2 30min)
1,003N·m [739.8lbf·ft] (Cont.)
477N·m [351.8lbf·ft] (Cont.)
135
42
57.3
99.1
15kW [20HP] (30min)
11kW [15HP] (Cont.)
6,000
15
11
0 1,060 2,000 2,500
Spindle Speed (r/min)
135N·m [99.6lbf·ft] (30min)
57.3N·m [42.3lbf·ft] (30min)
99.1N·m [73.1lbf·ft] (S1 Cont.)
42N·m [31lbf·ft] (S1 Cont.)
L2000Y Built-in 5,000 rpm L2600Y Built-in 4,000 rpm
L3000Y Built-in 3,000 rpm
Turn/Mill 5,000 rpm
Sub Spindle Built-in 6,000 rpm
599
323
259
205
409
22kW [30HP] (S3 25%, S2 30min)
4,000
22
18.5
15
0 300 350 700
650 810
Spindle Speed (r/min)
599N·m [441.8lbf·ft] (S3 25%)
323N·m [238.2lbf·ft] (S3 25%)
409N·m [301.7lbf·ft] (S1 Cont.)
205N·m [151.2lbf·ft] (S1 Cont.)
259N·m [191lbf·ft] (S2 30min)
15kW [20HP] (S1 Cont.)
18.5kW [25HP] (S3 25%)
95.5N·m [70.4lbf·ft] (5min)
47.1N·m [34.7lbf·ft] (15min)
33.7N·m [24.9lbf·ft] (Cont.)
Spindle output/torque diagram
Power (kW [HP]) Torque (N·m [lbf·ft]) Power (kW [HP]) Torque (N·m [lbf·ft])
Power (kW [HP]) Torque (N·m [lbf·ft]) Power (kW [HP]) Torque (N·m [lbf·ft])
1,123
664
657
782
923
2,800
26
22
18.5
13
0
187
269 467 700 1,402
Spindle Speed (r/min)
26kW [35HP] (S3 25%)
254.2
314.2
39.2
31.8
23.3
186.2
4,500
15
18.5
11
0 562.5
Spindle Speed (r/min)
124
15.9
11.7
62.1
84.7
4,500
11
7.5
5.5
0 845 2,535.2
Spindle Speed (r/min)
733.7
29
24
522.1
620.8
3,500
26
22
18.5
0 338 1,768 2,029
Spindle Speed (r/min)
124N·m [91.5lbf·ft] (S3 25%)
84.7N·m [62.5lbf·ft] (S2 30 min, S3 60%)
62.1N·m [45.8lbf·ft] (Cont.)5.5kW [7.4HP] (Cont.)
11kW [15HP] (S3 25%)
7.5kW [10HP] (S2 30min, S3 60%)
1,123N·m [828.3lbf·ft] (S2 15min)
22kW [30HP] (S2 15min)923N·m [680.8lbf·ft] (S3 25%)
782N·m [576.8lbf·ft] (S2 30min)
664N·m [489.7lbf·ft] (S1 Cont.)18.5kW [25HP] (S1 Cont.)
13kW [17.4HP] (S1 Cont.)657N·m [484.6lbf·ft] (S1 Cont.)
733.7N·m [841.1lbf·ft] (S3 25%.)
620.8N·m [457.9lbf·ft] (S2 30Min.)
522.1N·m [385.1lbf·ft] (S1 Cont.)
26kW [35HP] (S3 25%.)
22kW [30HP] (S2 30Min.)
18.5kW [25HP] (S1 Cont.)
11kW [15HP] (S1 Cont.)
15kW [20HP] (S3 60%)
18.5kW [25HP] (S3 25%)
254.2N·m [187.5lbf·ft] (S3 60%)
314.2N·m [231.7lbf·ft] (S3 25%)
186.2N·m [137.3lbf·ft] (S1 Cont.)
L2000Y Belt 4,500 rpm L2600Y Belt 3,500 rpm
L3000Y Belt 2,800 rpm Sub Spindle Belt 4,500 rpm
SpeciFicAtionS
unit : mm(in)external dimensions
iteM L2000SY/L2000Y L2000LSY / L2000LY / L2600SYL2600Y / L3000SY / L3000Y
L2600LY / L3000LY(2 door tYpe)
“A” 2,974 (117.1″) 3,304 (130.1″) 4,074 (160.4″)
“B” 690 (27.2″) 860 (33.9)″ 841 (33.1″)-Left / 651 (25.6″)-Right
“C” 847 (33.3″) 987 (38.9″) 987 (38.9″)
“D” 1,030 (40.6″) 1,070 (42.1″) 663 (26.1″)
“E” 3,280 (129.1″) 3,600 (141.7″) 4,315 (169.9″)
“F” 4,229 (166.5″) 4,549 (179.1″) 5,315 (209.3″)
16+17
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
SpeciFicAtionS
unit : mm(in)interference
103.9
121.1
265(X-STROKE)
103.9161.1
365
35 230225
103.9
265(X-STROKE) 103.9
325
172.8
58
60
60
172.8
60
601
20
(Y-S
TR
OK
E)
100
120
(Y-S
TR
OK
E)
240
(YS-S
TROKE)240
(YS-S
TROKE)
2
40
35
“A”
Main SP.
Ø175 (6")
Sub SP.
“A”
Main SP.
Ø175 (6")
Sub SP.
5
507.5
Ø25
4
Ø420
(MAX CUTTING DIA.)
55210
265
(X2-STROKE)
3580182.5
115
182.5
365
Ø670
100
Ø250
120
83
Ø28
0
Ø235
87
40
Ø210 (SUB)
Ø25
100
Ø50
Ø330
Ø240
Ø255
Ø254 (10" CHUCK)
Ø304 (12" CHUCK)
Ø210 (8" CHUCK)
Ø254 (10" CHUCK)
Ø670
120
Ø235
100
Ø23
2
Ø240
Ø240
Ø240
Ø255
Ø304 (12" CHUCK)
Ø210 (8" CHUCK)
SY Series
Y Series
Ø246.5
55210
265
(X2-STROKE)
3580182.5
115
182.5
365
507.5
Ø420
(MAX CUTTING DIA.)100
Ø250 Ø50
Ø330
“A” : L2000 Series (8″) | L2600 Series (10″) | L3000 Series (12″)
SpeciFicAtionS
unit : mm(in)tooling System
Specifications are subject to change without notice for improvement.
tooling parts detail
Angular Mill
Holder
Straight Mill
Holder
Tap
End Mill
Center Drill
Double
O.D Holder
O.D Holder
Facing Holder
Double
I.D Holder
I.D Holder Drill
Face Tool
O.D Tool
Cutting Holder
Milling Collet
ER32
Adapter
SET
Drill
Reamer
Boring Bar
Socket
Double
O.D Holder
U-Drill Cap
Triple
I.D Holder
Drill Socket
Boring Bar
(24 POSITION INDEX)
24P. INDEX
& OPTION
BMT65
12 Stations
ITEMY Type (12P) SY Type (12P) SY Type (24P : Opt.)
mm Unit inch Unit mm Unit inch Unit mm Unit inch Unit
Turning HolderO.D Holder
Right/Left 4 4 2 2 1 1
Double - - 1 1 1 1
Double (24P, Rear) - - - - 1 1
Double (24P) - - - - 1 1
Facing Holder 1 1 1 1 1 1
Cutting Holder - - 1 1 1 1
Boring HolderI.D Holder
Single 3 3 2 2 1 1
Double - - 1 1 - -
Triple - - - - 1 1
U-Drill Holder Cap 1 1 1 1 1 1
Driven HolderStraight Mill Holder Standard 2 2 2 2 2 2
Angular Mill Holder Standard 2 2 2 2 2 2
Socket
Boring
Ø16 (Ø5/8″) 1 - 1 - 1 -
Ø20 (Ø3/4″) 1 1 1 1 1 1
Ø25 (Ø1″) 1 1 1 1 1 1
Ø32 (Ø1 1/4″) 1 1 1 1 1 1
Ø40 (Ø1 1/2″) 1 1 1 1 1 1
Ø45 (Ø1 3/4″) - 1 - 1 - 1
Sub Boring
Ø10 (Ø3/8″) - - 1 1 1 1
Ø12 (Ø1/2″) - - 1 1 1 1
Ø16 (Ø5/8″) - - 1 1 1 1
Ø20 (Ø3/4″) - - 1 1 1 1
DrillMT 2 1 1 1 1 1 1
MT 3 1 1 1 1 1 1
MT 4 1 1 1 1 1 1
ER Collet 1 Set 1 Set 1 Set 1 Set 1 Set 1 Set
Adapter Set 1 Set 1 Set 1 Set 1 Set 1 Set 1 Set
18+19
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
SpeciFicAtionS
unit : mm(in)tooling travel range
210 (
8.3
)55
(2.2
)265 (
10.4
)
(X-S
TR
OK
E)
590 (23.2)
(Z-STROKE)
225 (
8.9
)40
(1.6
)265 (
10.4
)
(X-S
TR
OK
E)
590 (23.2)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
2
(0.1
)
590 (23.2)
(Z-STROKE)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
205 (
8.1
)60
(2.4
)
590 (23.2)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
50
(2)
63
(2.5)75
(3)
50
(2)
125 (4.9)
117
(4.6)
50
(2)
167 (6.6)
112
(4.4)
61
(2.4)
50
(2)
111
(4.4)
Axial driven Tool holder Angular driven Tool holder
Face Tool holder
O.D. Tool holder I.D. Tool holder
112
(4.4)
39
(1.5)
120 (4.7)
(QUILL)590 (23.2)
(TAIL TRAVEL)
199.5 (7.9) 121.5
(4.8)
48.5
(1.9)
560 (22) 124.5
(4.9)
30
(1.2)
33
(1.3
)
590 (23.2) 53.5
(2.1)
560 (22) 137
(5.4)
30
(1.2)
7
(0.3
)33
(1.3
)
560 (22)
10
(0.4
)
50
(2)
138.5
(5.5)
30
(1.2)
(8″)
(8″)
(8″)
(8″)
(8″)
L2000Y
SpeciFicAtionS
unit : mm(in)tooling travel range
265 (
10.4
)
(X-S
TR
OK
E)
2
(0.1
)
117
(4.6)
50
(2) 830 (32.7)
(Z-STROKE)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
112
(4.4)
830 (32.7)
(Z-STROKE)
210 (
8.3
)55
(2.2
) 265 (
10.4
)
(X-S
TR
OK
E)
830 (32.7)
(Z-STROKE)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
830 (32.7)
(Z-STROKE)
112
(4.4)
39
(1.5)
50
(2)
63
(2.5)75
(3)
50
(2)
125 (4.9)
Axial driven Tool holder Angular driven Tool holder
Face Tool holder
O.D. Tool holder I.D. Tool holder
205 (
8.1
)60
(2.4
)
830 (32.7)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
61
(2.4)
50
(2)
111
(4.4)
120 (4.7)
(QUILL)830 (32.7)
(TAIL TRAVEL)
199.5 (7.9) 121.5
(4.8)
48.5
(1.9)
800 (31.5) 124.5
(4.9)
30
(1.2)
33
(1.3
)
167 (6.6) 830 (32.7) 53.5
(2.1)
800 (31.5) 137
(5.4)
30
(1.2)
7
(0.3
)33
(1.3
)
800 (31.5) 138.5
(5.5)
30
(1.2)
10
(0.4
)
50
(2)
(8″)
(8″)
(8″)
(8″)
(8″)
L2000LY
20+21
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
SpeciFicAtionS
unit : mm(in)tooling travel range
590 (23.2)
(Z-STROKE)
32
(1.3
)23
(0.9
)
32
(1.3
)
48
(1.9)
156 (6.1)
590 (23.2)
(Z-STROKE)
55
(2.2
)
210 (
8.3
)
265 (
10.4
)
(X-S
TR
OK
E)
93
(3.7
)
67
(2.6
)
198 (
7.8
)
265 (
10.4
)
(X-S
TR
OK
E)
16 (0.6)41(1.6)386 (15.2) 155.5
(6.1)
32
(1.3)
386.5 (15.2)
35
(1.4
)
20 (
0.8
)
32
(1.3
)
32
(1.3)
590 (23.2)
(Z-STROKE)
210 (
8.3
)55 (
2.2
)
265 (
10.4
)
(X-S
TR
OK
E)
520 (20.5)(MAX. WORK LENGTH)
590 (23.2)
(ZB-STROKE)
91 (3.6)
207
(8.1)
81(3.2)
123 (4.8)
17
(0.7
)
38
(1.5
)
37
(1.5
)
386 (15.2) 195 (7.7)
590 (23.2)
(Z-STROKE)
225 (
8.9
)40
(1.6
)265 (
10.4
)
(X-S
TR
OK
E)
54
(2.1)
150 (5.9)
40
(1.6
)
47
(1.9
)
386 (15.2) 124 (4.9)
590 (23.2)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
2
(0.1
)
51
(2)
30 (1.2)
123 (4.8)
10
(0.4
)
15 (
0.6
)
65
(2.6
)
590 (23.2)
(Z-STROKE)
207.6 (8.2)66
(2.6)
524 (20.6)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
128 (
5)
385 (15.2)
205 (
8.1
)60
(2.4
)
209 (8.2)
590 (23.2)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
55
(2.2)
120
(4.7)
15
(0.6
)
20
(0.8
)
55
(2.2
)
112
(4.4)
39
(1.5)
50
(2)
63
(2.5)
133 (5.2)
270 (10.6)
75
(3)
50
(2)
125 (4.9)
50
(2)
229 (9)
279 (11)
158 (6.2)50
(2)
208 (8.2)
117
(4.6)
50
(2)
167 (6.6)
112.4
(4.4)
112.4
(4.4)
61
(2.4)
50
(2)
111
(4.4)
Double O.D. Tool holder Double I.D. Tool holder
Axial driven Tool holder Angular driven Tool holder
Face Tool holder
O.D. Tool holder I.D. Tool holder
(8″)
(8″)
(8″)
(8″)
(8″)
(8″)
(8″)
(6″)
(6″)
(6″)
(6″)
(6″)
(6″)
(6″)
30 (1.2)
L2000SY
SpeciFicAtionS
unit : mm(in)tooling travel range
32
(1.3
)23
(0.9
)
32
(1.3
) 67
(2.6
)
198 (
7.8
)
265 (
10.4
)
(X-S
TR
OK
E)
(6″)
16 (0.6)155.5
(6.1)
32
(1.3)
93
(3.7
)
35
(1.4
)
20 (
0.8
)
32
(1.3
)
(6″)
(6″)
40
(1.6
)
47
(1.9
)
(6″)
265 (
10.4
)
(X-S
TR
OK
E)
2
(0.1
)
10
(0.4
)
15 (
0.6
)
65
(2.6
)
(6″)
208 (8.2)
117
(4.6)
50
(2)
167 (6.6)
830 (32.7)
(Z-STROKE)
207.6 (8.2)66
(2.6)
764 (30)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
128 (
5)
112.4
(4.4)
112.4
(4.4)
830 (32.7)
(Z-STROKE)
48
(1.9)
156 (6.1)
830 (32.7)
(Z-STROKE)
55
(2.2
)
210 (
8.3
)
265 (
10.4
)
(X-S
TR
OK
E)
41(1.6)626 (24.6) 626.5 (24.7)
32 (1.3)
830 (32.7)
(Z-STROKE)
210 (
8.3
)55
(2.2
)265 (
10.4
)
(X-S
TR
OK
E)
760 (29.9)(MAX. WORK LENGTH)
830 (32.7)
(ZB-STROKE)
91 (3.6)
207 (8.1)
81
(3.2)
123 (4.8)
17
(0.7
)
38
(1.5
)
37
(1.5
)
626 (24.6) 195 (7.7)
830 (32.7)
(Z-STROKE)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
54
(2.1)
150 (5.9)
626 (24.6)
830 (32.7)
(Z-STROKE)
112
(4.4)
39
(1.5)
50
(2)
63
(2.5)
133 (5.2)
270 (10.6)
7550
(2)
125 (4.9)
50
(2)
229 (9)
279 (11)
158 (6.2)50
(2)
Double O.D. Tool holder Double I.D. Tool holder
Axial driven Tool holder Angular driven Tool holder
Face Tool holder
O.D. Tool holder I.D. Tool holder
(8″)
(8″)
(8″)
(8″)
(8″)
(8″)
625 (24.6)
205 (
8.1
)60
(2.4
)
830 (32.7)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
61
(2.4)
50
(2)
111
(4.4)
(6″)
(6″)
(8″)
124 (4.9)51
(2)
30 (1.2)
123 (4.8)
209 (8.2)55
(2.2)
120
(4.7)
15
(0.6
)
55
(2.2
)
30 (1.2)
20(0
.8)
L2000LSY
22+23
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
SpeciFicAtionS
unit : mm(in)tooling travel range
(10″)
(10″)
265 (
10.4
)
(X-S
TR
OK
E)
2
(0.1
)
830 (32.7)
(Z-STROKE)
(10″)
(10″)
225 (
8.9
)40
(1.6
)
830 (32.7)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
112
(4.4)
65
(2.6)
48
(1.9)
(10″)
118
(4.6)
46
(1.8)
77
(3)
48
(1.9)
196 (7.7)
64
(2.5)
63
(2.5)
48
(1.9)
48
(1.9)
Axial driven Tool holder Angular driven Tool holder
Face Tool holder
O.D. Tool holder I.D. Tool holder
16
(0.6)
830 (32.7)
(Z-STROKE)
210 (
8.3
)55
(2.2
) 265 (
10.4
)
(X-S
TR
OK
E)
830 (32.7)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
830 (32.7)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
120 (4.7)
(QUILL)830 (32.7)
(TAIL TRAVEL)
203.5
(8)
121.5
(4.8)
37.5
(1.5)
225 (
8.9
)40
(1.6
)
125 (4.9) 800 (31.5) 124.5
(4.9)
30
(1.2)
33
(1.3
)
167 (6.6) 830 (32.7) 53.5
(2.1)
800 (31.5) 137
(5.4)
30
(1.2)
7
(0.3
)33
(1.3
)
205 (
8.1
)60
(2.4
)
111
(4.4)
800 (31.5) 138.5
(5.5)
30
(1.2)
10
(0.4
)
50
(2)
L2600Y
SpeciFicAtionS
unit : mm(in)tooling travel range
(10″)
(10″)
(6″)
265 (
10.4
)
(X-S
TR
OK
E)
2
(0.1
)
830 (32.7)
(Z-STROKE)
(10″)
(10″)
(10″)
(10″)
93
(3.7
)
35
(1.4
)
20 (
0.8
)
32
(1.3
)
(6″)
(6″)
10
(0.4
)
15 (
0.6
)
65
(2.6
)
(6″)
830 (32.7)
(Z-STROKE)
208 (8.2)66
(2.6)
764 (30)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
128 (
5)
112
(4.4)
231 (9.1) 160
65
(2.6)
48
(1.9)
48
(1.9)
48
(1.9)
48
(1.9)
48
(1.9)
48
(1.9)
(10″)
118 (4.6) 46
(1.8)
135 (5.3)
272 (10.7)
77
(3)
196 (7.7) 64.4
(2.5)
63
(2.5)
Double O.D. Tool holder Double I.D. Tool holder
Axial driven Tool holder Angular driven Tool holder
Face Tool holder
O.D. Tool holder I.D. Tool holder
16
(0.6)
32
(1.3
)23
(0.9
)
32
(1.3
)
55
(2.2
)
210 (
8.3
)
16 (0.6)155.5
(6.1)
32
(1.3)
208 (8.2) 626.5 (24.7)67
(2.6
)
198 (
7.8
)
265 (
10.4
)
(X-S
TR
OK
E)
(6″)
830 (32.7)
(Z-STROKE)
830 (32.7)
(Z-STROKE)
210 (
8.3
)55
(2.2
)265 (
10.4
)
(X-S
TR
OK
E)
81
(3.2)
123 (4.8)
760 (29.9)(MAX. WORK LENGTH)
830 (32.7)
(ZB-STROKE)
17
(0.7
)
38
(1.5
)
37
(1.5
)
830 (32.7)
(Z-STROKE)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
40
(1.6
)
47
(1.9
)
195 (7.7)54
(2.1)
150 (5.9)626 (24.6)125 (4.9)
48
(1.9)
156 (6.1) 41(1.6)626 (24.6)279 (11)
625 (24.6)
205 (
8.1
)60
(2.4
)
830 (32.7)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
111
(4.4)
(6″)
830 (32.7)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
(6″)
167 (6.6) 626 (24.6) 124 (4.9)51
(2)
30 (1.2)
123 (4.8)
15
(0.6
)
20(0
.8)
55
(2.2
)
209 (8.2)55
(2.2)
120
(4.7)
30 (1.2)
32 (1.3)
91 (3.6)
207 (8.1)
L2600SY
24+25
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
SpeciFicAtionS
unit : mm(in)tooling travel range
(10″)
(10″)
(10″)
120 (4.7)
(QUILL)
1350 (53.1)
(Z-STROKE)65
(2.6)
48
(1.9)
210 (
8.3
)55
(2.2
) 265 (
10.4
)
(X-S
TR
OK
E)120
(4.7)
46
(1.8)
1350 (53.1) (TAIL TRAVEL)203.5 (8) 121.5
(4.8)
37.5
(1.5)
125
(4.9)
1320 (52) 124.5
(4.9)
1350(53.1)
(Z-STROKE)77
(3)
48
(1.9)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
33
(1.3
)
1350 (53.1) 53.5
(2.1)
1350 (53.1)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
196
(7.7)
2
(0.1
)
1350 (53.1)
(Z-STROKE)112.43
(4.4)
137.1
(5.4)
1320 (52)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
112.4
(4.4)
7
(0.3
)
33
(1.3
)
1320 (52)
205 (
8.1
)60
(2.4
)
138.5
(5.5)
1350 (53.1)
(Z-STROKE)65
(2.6)
46
(1.8)
265 (
10.4
)
(X-S
TR
OK
E)
111
(4.4)
10
(0.4
)
50
(2)
48
(1.9)
148
(5.8)
Face Tool holder
Axial driven
Tool holder
Angular driven
Tool holder
O.D. Tool holder
I.D. Tool holder
1417 (55.8)
(10″)
(10″)
30 (1.2)
30 (1.2)
30 (1.2)
L2600LY
SpeciFicAtionS
unit : mm(in)tooling travel range(12″)
(12″)
(12″)
265 (
10.4
)
(X-S
TR
OK
E)
2
(0.1
)
830 (32.7)
(Z-STROKE) 830 (32.7)
(Z-STROKE)
225
40
265 (
10.4
)
(X-S
TR
OK
E)
830 (32.7)
(Z-STROKE)
210 (
8.3
)55
(2.2
) 265 (
10.4
)
(X-S
TR
OK
E)
830 (32.7)
(Z-STROKE)
225
40
265 (
10.4
)
(X-S
TR
OK
E)
78
(3.1)
35
(1.4)
125 (4.9)
90
(3.5)
35
(1.4)
161
(6.3)
196
(7.7)
77.4
(3)
112.4
(4.4)
76
(3)
35
(1.4)
111
(4.4)
35
(1.4) 35
(1.4)
Axial driven Tool holder Angular driven Tool holder
Face Tool holder
O.D. Tool holder I.D. Tool holder
830 (32.7)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
(12″)
(12″)
120 (4.7)
(QUILL)830 (32.7)
(TAIL TRAVEL)
121.5
(4.8)
33.3
(1.3)
800 (31.5) 124.5
(4.9)
30
(1.2)
33
(1.3
)
830 (32.7) 53.5
(2.1)
7
(0.3
)33
(1.3
)
800 (31.5) 137.1
(5.4)
30
(1.2)
205 (
8.1
)60
(2.4
)
10
(0.4
)
50
(2)
800 (31.5) 138.5
(5.5)
30
(1.2)
203.5
(8)
L3000Y
26+27
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
SpeciFicAtionS
unit : mm(in)tooling travel range
(12″)
(12″)
(12″)
(12″)
(6″)
265 (
10.4
)
(X-S
TR
OK
E)
830 (32.7)
(Z-STROKE)(6″)
830 (32.7)
(Z-STROKE)
207.6
(8.2)
265 (
10.4
)
(X-S
TR
OK
E)
67
(2.6
)
198 (
7.8
)
265 (
10.4
)
(X-S
TR
OK
E)
(6″)
830 (32.7)
(Z-STROKE)
(6″)
830 (32.7)
(Z-STROKE)
210 (
8.3
)55
(2.2
) 265 (
10.4
)
(X-S
TR
OK
E)
760 (29.9)(MAX. WORK LENGTH)
830 (32.7)
(ZB-STROKE)
(6″)
830 (32.7)
(Z-STROKE)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
244
(9.6)173
(6.8)
35
(1.4)
78
(3.1)
35
(1.4)
148 (5.8)
285 (11.2)
90
(3.5)
35
(1.4)
161
(6.3)
196
(7.7)
77.4
(3)
76
(3)
35
(1.4)
35
(1.4)
35
(1.4) 35
(1.4)
35
(1.4)
Double O.D. Tool holder Double I.D. Tool holder
Axial driven Tool holder Angular driven Tool holder
Face Tool holder
O.D. Tool holder I.D. Tool holder
205 (
8.1
)60
(2.4
)
830(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
(6″)
830 (32.7)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
(6″)
(12″)
(12″)
(12″)
40
(1.6
)
47
(1.9
)
195 (7.7)54
(2.1)
150 (5.9)626 (24.6)125 (4.9)
81
(3.2)
123 (4.8)
17
(0.7
)
38
(1.5
)
37
(1.5
)
32 (1.3)
91 (3.6)
207 (8.1)
93
(3.7
)
35
(1.4
)
20 (
0.8
)
32
(1.3
)
32
(1.3
)23
(0.9
)
32
(1.3
)
55
(2.2
)
210 (
8.3
)
16 (0.6)155.5
(6.1)
32
(1.3)
208 (8.2) 626.5 (24.7)48
(1.9)
156 (6.1) 41(1.6)626 (24.6)279 (11)
2
(0.1
)
10
(0.4
)
15 (
0.6
)
65
(2.6
)
66
(2.6)
764 (30)
225 (
8.9
)40
(1.6
) 128 (
5)
112.4
(4.4)
626 (24.6) 124 (4.9)51
(2)
30 (1.2)
123 (4.8)
625 (24.6)111
(4.4)
15
(0.6
)
20(0
.8)
55
(2.2
)
209 (8.2)55
(2.2)
120
(4.7)
30 (1.2)
L3000SY
SpeciFicAtionS
unit : mm(in)tooling travel range
(12″)
(12″)
120 (4.7)
(QUILL)210 (
8.3
)55
(2.2
) 265 (
10.4
)
(X-S
TR
OK
E)
1350 (53.1)
(TAIL TRAVEL)
121.5
(4.8)
1320 (52) 124.5
(4.9)
1350 (53.1)
(Z-STROKE)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
33
(1.3
)
1350 (53.1) 53.5
(2.1)
1350 (53.1)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
2
(0.1
)
1350 (53.1)
(Z-STROKE)
137.1
(5.4)
1320 (52)
225 (
8.9
)40
(1.6
) 265 (
10.4
)
(X-S
TR
OK
E)
7
(0.3
)
33
(1.3
)
1350 (53.1)
(Z-STROKE)74 (2.9)39
(1.5)
210.5
(8.3)
33.3 (1.3)
125
(4.9)
86
(3.4)
39
(1.5)
39
(1.5)
196
(7.7)
112.4
(4.4)
72
(2.8)
39
(1.5)
111
(4.4)
157
(6.2)
S/G
33
(1.3)
50.5
(2)
177.2
(7)
39
(1.5)
73.43
(2.9)
Face Tool holder
Axial driven
Tool holder
Angular driven
Tool holder
O.D. Tool holder
I.D. Tool holder
1320 (52)
205 (
8.1
)60
(2.4
)
138.5
(5.5)
1350 (53.1)
(Z-STROKE)
265 (
10.4
)
(X-S
TR
OK
E)
(12″)
(12″)
(12″)
30 (1.2)
30 (1.2)
10
(0.4
)
50
(2)
30 (1.2)
L3000LY
28+29
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
SpeciFicAtionS
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors)Specifications are subject to change without notice for improvement.
Specifications [ ] : Option
iteM L2000Y L2000LY L2000SY L2000LSY
CAPACITY
Swing Over the Bed mm(in) Ø800 (31.5″)
Swing Over the Carriage mm(in) Ø670 (26.4″)
Max. Turning Dia. mm(in) Ø420 (16.5″)
Max. Turning Length mm(in) 520 (20.5″) 760 (29.9″) 520 (20.5″) 760 (29.9″)
Bar CapacityMain mm(in) Ø65 (2.6″)
Sub mm(in) - Ø51 (2″)
SPINDLE
Chuck SizeMain inch 8″
Sub inch - 6″
Spindle BoreMain mm(in) Ø76 (3″)
Sub mm(in) - Ø62 (2.4″)
Spindle Speed (rpm)
Main r/min 5,000 [4,500]
Sub r/min - 6,000 [4,500]
Motor (Max/Cont.)Main kW(HP) 22/11 (30/15) [18.5/11 (25/15)]
Sub kW(HP) - 15/11 (20/15) [11/5.5 (15/7.4)]
Torque(Max/Cont.)
Main N・m(lbf・ft) 358/301 (264/222) [314.2/186.2 (231.7/137.3)]
Sub N・m(lbf・ft) - 135/99.1 (99.6/73.1) [124/62.1 (91.5/45.8)]
Spindle TypeMain - BUILT-IN [BELT]
Sub - - BUILT-IN [BELT]
Spindle NoseMain - A2-6
Sub - - A2-5
C-axis Indexing deg 0.001˚
FEED
TravelX/Y mm(in) 265/120 {±60} (10.4″/4.7″ {±2.4″})
Z/ZB mm(in) 590 (23.2″) 830 (32.7″) 590/590 (23.2″/23.2″) 830/830 (32.7″/32.7″)
Rapid Traverse Rate
X/Y m/min(ipm) 30/10 (1,181/394)
Z/ZB m/min(ipm) 30/30 (1,181/1,181)
Slide Type - BOX GUIDE
TURRET
No. of Tools ea 12
Tool SizeOD mm(in) □25 (1″)
ID mm(in) Ø50 (2″)
Indexing Time sec/step 0.15
Y-Axis Type - WEDGE TYPE
LIVE TOOL
Motor (Max/Cont.) kW(HP) 5.5/1.5 (7.4/2) [7.5/1.5 (10/2)]
Milling Tool Speed (rpm) r/min 5,000
Torque (Max/Cont.) N・m(lbf・ft) 47.1/33.7 (34.7/24.9) [95.5/33.7 (70.4/24.9)]
Collet Size mm(in) Ø25 (1″) {ER32}
Type - BMT65
TAILSTOCk
Taper - MT#5 -
Quill Dia. mm(in) Ø100 (3.9″) -
Quill Travel mm(in) 120 (4.7″) -
Travel mm(in) 590 (23.2″) 830 (32.7″) -
TANkCAPACITY
Coolant Tank ℓ(gal) 275 (72.6) 290 (76.6) 275 (72.6) 290 (76.6)
Lubricating Tank ℓ(gal) 3 (0.8)
POWERSUPPLY
Electric Power Supply kVA Built-in : 39 [Belt : 32] Built-in : 55 [Belt : 38]
Thickness of Power Cable Sq Over 25 Built-in : Over 50 [Belt : Over 25]
Voltage V/Hz 220/60 (200/50*)
MACHINEFloor Space (L×W) mm(in)
3,220×1,890(126.8″×74.4″)
3,600×1,890(141.7″×74.4″)
3,220×1,890(126.8″×74.4″)
3,600×1,890(141.7″×74.4″)
Height mm(in) 1,950 (76.8)
Weight kg(lb) 5,500 (12,125) 6,000 (13,228) 5,800 (12,787) 6,300 (13,889)
NC Controller - HYUNDAI WIA FANUC i Series - Smart Plus
SpeciFicAtionS
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors)Specifications are subject to change without notice for improvement.
Specifications [ ] : Option
iteM L2600Y L2600LY L2600SY
CAPACITY
Swing Over the Bed mm(in) Ø800 (31.5″)
Swing Over the Carriage mm(in) Ø670 (26.4″)
Max. Turning Dia. mm(in) Ø420 (16.5″)
Max. Turning Length mm(in) 760 (29.9″) 1,280 (50.4″) 760 (29.9″)
Bar CapacityMain mm(in) Ø81 (3.2″)
Sub mm(in) - Ø51 (2″)
SPINDLE
Chuck SizeMain inch 10″
Sub inch - 6″
Spindle BoreMain mm(in) Ø91 (3.6″)
Sub mm(in) - Ø62 (2.4″)
Spindle Speed (rpm)
Main r/min 4,000 [3,500]
Sub r/min - 6,000 [4,500]
Motor (Max/Cont.)Main kW(HP) 22/15 (30/20) [26/18.5 (35/25)]
Sub kW(HP) - 15/11 (20/15) [11/5.5 (15/7.4)]
Torque(Max/Cont.)
Main N・m(lbf・ft) 599/409 (441.8/301.7) [733.7/522.1 (541.1/385.1)]
Sub N・m(lbf・ft) - 135/99.1 (99.6/73.1)[124/62.1 (91.5/45.8)]
Spindle TypeMain - Built-in [Belt]
Sub - - Built-in [Belt]
Spindle NoseMain - A2-8
Sub - - A2-5
C-axis Indexing deg 0.001˚
FEED
TravelX/Y mm(in) 265/120 {±60} (10.4″/4.7″ {±2.4″})
Z/ZB mm(in) 830 (32.7″) 1,350 (53.1) 830/830 (32.7″/32.7″)
Rapid Traverse Rate
X/Y m/min(ipm) 30/10 (1,181/394)
Z/ZB m/min(ipm) 30/30 (1,181/1,181)
Slide Type - BOX GUIDE
TURRET
No. of Tools ea 12
Tool SizeOD mm(in) □25 (1″)
ID mm(in) Ø50 (2″)
Indexing Time sec/step 0.15
Y-Axis Type - WEDGE TYPE
LIVE TOOL
Motor (Max/Cont.) kW(HP) 5.5/1.5 (7.4/2) [7.5/1.5 (10/2)]
Milling Tool Speed (rpm) r/min 5,000
Torque (Max/Cont.) N・m(lbf・ft) 47.1/33.7 (34.7/24.9) [95.5/33.7 (70.4/24.9)]
Collet Size mm(in) Ø25 (1″) {ER32}
Type - BMT65
TAILSTOCk
Taper - MT#5 -
Quill Dia. mm(in) Ø100 (3.9″) -
Quill Travel mm(in) 120 (4.7″) -
Travel mm(in) 830 (32.7″) 1,350 (53.1) -
TANkCAPACITY
Coolant Tank ℓ(gal) 290 (76.6) 320 (84.5) 290 (76.6)
Lubricating Tank ℓ(gal) 3 (0.8)
POWERSUPPLY
Electric Power Supply kVA Built-in : 39 [Belt : 37] Built-in : 55 [Belt : 46]
Thickness of Power Cable Sq Over 25 Built-in : Over 50 [Belt : Over 35]
Voltage V/Hz 220/60 (200/50*)
MACHINEFloor Space (L×W) mm(in) 3,600×1,890 (141.7″×74.4″) 4,120×1,890 (162.2″×74.4″) 3,600×1,890 (141.7″×74.4″)
Height mm(in) 1,950 (76.8)
Weight kg(lb) 6,200 (13,669) 7,500 (16,535) 6,550 (14,440)
NC Controller - HYUNDAI WIA FANUC i Series - Smart Plus
30+31
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
controLLer
Specifications [ ] : Option
iteM L3000Y L3000LY L3000SY
CAPACITY
Swing Over the Bed mm(in) Ø800 (31.5″)
Swing Over the Carriage mm(in) Ø670 (26.4″)
Max. Turning Dia. mm(in) Ø420 (16.5″)
Max. Turning Length mm(in) 760 (29.9″) 1,280 (50.4″) 760 (29.9″)
Bar CapacityMain mm(in) Ø102 (4″)
Sub mm(in) - Ø51 (2″)
SPINDLE
Chuck SizeMain inch 12″
Sub inch - 6″
Spindle BoreMain mm(in) Ø115 (4.5″)
Sub mm(in) - Ø62 (2.4″)
Spindle Speed (rpm)
Main r/min 3,000 [2,800]
Sub r/min - 6,000 [4,500]
Motor (Max/Cont.)Main kW(HP) 37/25 (50/33.5) [26/18.5 (35/25)]
Sub kW(HP) - 15/11 (20/15) [11/5.5 (15/7.4)]
Torque(Max/Cont.)
Main N・m(lbf・ft) 1,262/1,003 (930.8/739.8) [1,123/664 (828.2/489.7)]
Sub N・m(lbf・ft) - 135/99.1 (99.6/73.1)[124/62.1 (91.5/45.8)]
Spindle TypeMain - Built-in [Belt]
Sub - - Built-in [Belt]
Spindle NoseMain - A2-11
Sub - - A2-5
C-axis Indexing deg 0.001˚
FEED
TravelX/Y mm(in) 265/120 {±60} (10.4″/4.7″ {±2.4″})
Z/ZB mm(in) 830 (32.7″) 1,350 (53.1) 830/830 (32.7″/32.7″)
Rapid Traverse Rate
X/Y m/min(ipm) 30/10 (1,181/394)
Z/ZB m/min(ipm) 30/30 (1,181/1,181)
Slide Type - BOX GUIDE
TURRET
No. of Tools ea 12
Tool SizeOD mm(in) □25 (1″)
ID mm(in) Ø50 (2″)
Indexing Time sec/step 0.15
Y-Axis Type - WEDGE TYPE
LIVE TOOL
Motor (Max/Cont.) kW(HP) 5.5/1.5 (7.4/2) [7.5/1.5 (10/2)]
Milling Tool Speed (rpm) r/min 5,000
Torque (Max/Cont.) N・m(lbf・ft) 47.1/33.7 (34.7/24.9) [95.5/33.7 (70.4/24.9)]
Collet Size mm(in) Ø25 (1″) {ER32}
Type - BMT65
TAILSTOCk
Taper - MT#5 -
Quill Dia. mm(in) Ø100 (3.9″) -
Quill Travel mm(in) 120 (4.7″) -
Travel mm(in) 830 (32.7″) 1,350 (53.1) -
TANkCAPACITY
Coolant Tank ℓ(gal) 290 (76.6) 320 (84.5) 290 (76.6)
Lubricating Tank ℓ(gal) 3 (0.8)
POWERSUPPLY
Electric Power Supply kVA Built-in : 52 [Belt : 37] Built-in : 68 [Belt : 46]
Thickness of Power Cable Sq Over 35 Built-in : Over 70 [Belt : Over 35]
Voltage V/Hz 220/60 (200/50*)
MACHINEFloor Space (L×W) mm(in) 3,600×1,890 (141.7″x74.4″) 4,320×1,890 (170.1″x74.4″) 3,600×1,890 (141.7″x74.4″)
Height mm(in) 1,950 (76.8″)
Weight kg(lb) 6,700 (14,771) 7,800 (17,196) 6,900 (15,212)
NC Controller - HYUNDAI WIA FANUC i Series - Smart Plus
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors)Specifications are subject to change without notice for improvement.
SpeciFicAtionS
Figures in inch are converted from metric values.The FANUC controller specifications are subject to change based on the policy of company CNC supplying.
HYundAi WiA FAnuc i Series - Smart plus [ ] : Option
Controlled axis / Display / Accuracy Compensation
Control axes2 axes (X, Z) / 3 axes (X, Z, C) / 4 axes (X,Z,Y,C)5 axes (X, Z, B, C, A) / 6 axes (X, Z, Y, B, C, A)7 axes (X1/Z1, X2/Z2, B2, C1/C2)
Simultaneously controlled axes 2 axes [Max. 4 axes]Designation of spindle axes 3 axes [Max. 4 axes]
Least setting UnitX, Z, Y, B axes : 0.001 mm (0.0001 inch)C, A axes : 0.001 deg
Least input incrementX, Z, Y, B axes : 0.001 mm (0.0001 inch)C, A axes : 0.001 deg
Inch / Metric conversion G20 / G21 High response vector controlInterlock All axes / Each axisMachine lock All axesBacklash compensation ± 0~9999 pulses (exc.Rapid traverse / Cutting feed)Position switchLCD / MDI 15 inch LCD unit (with Touch Panel)Feedback Absolute motor feedback Stored stroke check 1 Over travel Stored stroke check 2, 3PMC axis controlOperationAutomatic operation (Memory)MDI operationDNC operation Needed DNC software / CF cardProgram restartWrong operation preventionProgram check function Dry runSingle blockSearch function Program Number / Sequence NumberInterpolation functionsNano interpolationPositioning G00 Linear interpolation G01 Circular interpolation G02, G03 Exact stop mode Single : G09, Continuous : G61Dwell G04, 0 ~ 9999.9999 sec Skip G31
Reference position return1st reference : G28, 2nd reference : G30Ref. position check : G27
Thread synchronous cutting G33Thread cutting retractVariable lead thread cuttingMulti / Continuous threadingFeed function / Acc. & Dec. control
Manual feed
Rapid traverseJog : 0~2,000 mm/min (79 ipm)Manual handle : x1, x10, x100 pulsesReference position return
Cutting Feed command Direct input F codeFeedrate override 0 ~ 200% (10% Unit)Rapid traverse override 1%, F25%, 50%, 100% Override cancelFeed per minute G98 Feed per revolution G99 Look-ahead block 1 blockProgram inputTape Code EIA / ISO Optional block skip 1 ea Absolute / Incremental program G90 / G91 Program stop / end M00, M01 / M02, M30 Maximum command unit ± 999,999.999 mm (± 99,999.9999 inch)Plane selection X-Y : G17 / Z-X : G18 / Y-Z : G19Workpiece coordinate system G52, G53, 6 pairs (G54 ~ G59) Manual absolute Fixed ONProgrammable data input G10 Sub program call 10 folds nestedCustom macro #100 ~ #199, #500 ~ #999G code system A, B/C Programmable mirror image G51.1, G50.1 G code preventing buffering G4.1 Direct drawing dimension program Including Chamfering / Corner RConversational Program SmartGuide-i
Program inputMultiple repetitive cycles Ⅰ, ⅡCanned cycle for turningAuxiliary function / Spindle speed functionAuxiliary function M & 4 digitLevel-up M Code High speed / Multi / Bypass M codeSpindle speed function S & 5 digit , Binary outputSpindle override 0% ~ 150% (10% Unit)Multi position spindle orientation M19 (S##)FSSB Rigid tappingConstant surface speed control G96, G97 Tool function / Tool compensationTool function T & 2 digit + Offset 2 digitTool life managementTool offset pairs 128 pairsTool nose radius compensation G40, G41, G42Geometry / Wear compensationDirect input of offset measured BEditing functionPart program storage size 5,120m (2MB)No. of registerable programs 1,000 ea Program protectBackground editingExtended part program editing Copy, move and change of NC programMemory card program editData input / output & Interface
I/O interfaceCF card, USB memoryEmbedded Ethernet interface
Screen hard copyExternal messageExternal key inputExternal workpiece number searchAutomatic data backupSetting, display and diagnosisSelf-diagnosis functionHistory display & Operation Alarm & Operator message & OperationRun hour / Parts count displayMaintenance informationActual cutting feedrate displayDisplay of spindle speed / T codeGraphic displayOperating monitor screen Spindle / Servo load etc.Power consumption monitoring Spindle & ServoSpindle / Servo setting screenMulti language display Support 24 languagesDisplay language switching Selection of 5 optional LanguagesLCD Screen Saver Screen saverUnexpected disturbance torque BST (Back spin torque limit)Function for machine typeCs contour control (C & A axes) Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Polar coordinate interpolation Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Cylindrical interpolation Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Polygon turning (2 Spindles) Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Canned cycle for drilling Mill, MS, Y, SY, LF-Mill, TTMS, TTSY Spindle orientation expansion MS, SY TTS, TTMS, TTSY Spindle synchronous control MS, SY TTS, TTMS, TTSY Torque control MS, SY TTS, TTMS, TTSY Y axis offset Y, SY, TTSY Arbitrary angular control Y, SY, TTSY Composite / Superimposed control MS, SY, TTS, TTMS, TTSY Balance cutting TTS, TTMS, TTSY
OptionAdditional optional block skip 9 eaFast ethernet Needed option boardData server Needed option boardProtection of data at 8 levelsTool offset pairs 200 pairsHelical interpolationOptional block skip 40 ea, 200 ea (AICC Ⅱ)
32+33
L-Y Series
CNC Turning Center
HYUNDAI WIA
MACHINE TOOL
EXPERIENCE
THE NEW TECHNOLOGY
controLLer
L2600SY
3D Movie
L2600SY
Movie
2020-12 001.002 ENG
With its top-quality HYUNDAI WIA machine tool creates a new and better world.
HEADQUARTERChangwon Technical Center/R&D Center/Factory 153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea TEL : +82 55 280 9114 FAX : +82 55 282 9114
Overseas Sales Team /R&D Center 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea TEL : +82 31 8090 2539
OVERSEAS OFFICESHYUNDAI WIA Machine America corp. 450 Commerce Blvd, Carlstadt, NJ 07072, USA TEL : +1-201-987-7298
HYUNDAI WIA Europe GmbH Alexander-Fleming-Ring 57, 65428 Rüsselsheim Germany TEL : +49-0-6142-9256-0
HYUNDAI WIA Machine Tools China 2-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China TEL : +86-21-6427-9885
India Branch Office #4/169, 1st Floor, LOTTE BLDG, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai - 600096, Tamilnadu, India TEL : +91-76-0490-3348
Vietnam Branch Office Flat number 05, Service and Trade Center of Viet Huong Industrial Zone, Highway 13, Thuan Giao , Thuan An, Binh Duong, Vietnam TEL : +84-3-5399-5099
HYUNDAI WIA MT
www.youtube.com/HYUNDAIWIAMT