Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
Summary
Remix of Optical Illusion Pinwheel from Dalpekwith bigger blades and 608 (2RS) bearings.Turns into the wind.
Uses original blades, printed with 180% of original size.
Needs three 608 (2RS) bearings and a 4mm diameter rod
Toys & Games > Outdoor Toys
windmill wind rotation pinwheel opticalillusion garden
air
Post-Printing
• Rod needs to be glued in place with epoxy• Caps should be glued to the bolt with a drop of superglue or epoxy• Bearings and bolts (should) fit in place
3DMK
Optical IllusionPinwheel withBearings
VIEW IN BROWSER
updated 20. 11. 2019 | published 20. 11. 2019
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
1.2 MBupdated 1. 11. 2019
1.1 MBupdated 1. 11. 2019
77.4 KBupdated 1. 11. 2019
169.0 KBupdated 1. 11. 2019
57.6 KBupdated 1. 11. 2019
60.9 KBupdated 1. 11. 2019
39.0 KBupdated 1. 11. 2019
Find source .stl files on Thingiverse.com
bladea_180percent_size.stl
bladeb_180percent_size.stl
mount_bottom.stl
mount_top.stl
ground_spike.stl
bolt.stl
cap.stl
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition