Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

Summary

This was created in Fusion 360 from a 2d piece of art I found on theinternet. Slice it at 0.2mm and each color change will fall exactly on a newlayer. Throw in an M600 command anywhere you want to change colorsand print away. These make great presents!

Art & Design > 2D Plates & Logos

singleextruder queen multicolor freddiemercury art

Category: Art

C C

Multicolor FreddyMercury print forsingle extruderprinters

VIEW IN BROWSER

updated 10. 11. 2019 | published 10. 11. 2019

3D M

ODEL

ONLY

144.4 KBupdated 9. 11. 2019

Find source .stl files on Thingiverse.com

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

freddyface.stl