Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
Summary
All credit goes to Stefanos Anagnostopoulos. 6 piece Joker mask printed inPLA, then glued, filler, sand, primer, and acrylic paint.
Costumes & Accessories > Masks
joker halloween
M Mike P
Joker Mask
VIEW IN BROWSER
updated 17. 5. 2019 | published 17. 5. 2019
3D M
ODEL
ONLY
8.4 MBupdated 17. 5. 2019
12.7 MBupdated 17. 5. 2019
14.8 MBupdated 17. 5. 2019
14.3 MBupdated 17. 5. 2019
15.3 MBupdated 17. 5. 2019
20.2 MBupdated 17. 5. 2019
Find source .stl files on Thingiverse.com
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
joker-part4.stl
part2-1-repaired.stl
joker-part3-left-repaired.stl
part2-2-repaired-repaired.stl
joker-part3-right.stl
joker-part1-repaired.stl
License
This work is licensed under a Creative Commons (International License)
Public Domain
✔ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition