Summary

This organizer contains quick start boxes for the two players, separatecard trays for the character and clues decks, and one bin for theinvestigation markers.

IMPORTANT: I was given the German version of the game (published byKosmos), in which for reasons unknown Sherlock is competing withMoriarty and not his brother Mycroft. From the information I can glancefrom BGG, it appears that all international versions use the same squarebox of 7.87 x 7.87 (or 20mm x 20mm) but the heights of those boxesseem to be all over the place; the English version for example isapparently only 1.1 inches tall compared to the 1.77 inches of the Germanversion. So if you're using an international version, your mileage may varyand the lid may get a bit pushed up. There are also differences in the rulesand the cards set but those shouldn't matter for this design.

You'll need to print two quick start boxes, which hold the three actionmarkers, six investigation markers ("Einflussmarker") (or five in the Englishversion, because, why not...), an "Übersichtskarte"(cheat sheet), and the"Rollenkarte" (role card) for each player. Looks like the English versiondoesn't have role cards as the Mycroft and Moriarty cards are useddifferently. Yeah, it's confusing

fuchsr

Insert/organizer forHolmes: Sherlockgegen Moriarty(Holmes: Sherlock& Mycroft)

VIEW IN BROWSER

updated 9. 5. 2020 | published 9. 5. 2020

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

102.8 KBupdated 17. 2. 2020

97.1 KBupdated 9. 5. 2020

109.9 KBupdated 9. 5. 2020

107.3 KBupdated 9. 5. 2020

Toys & Games > Board games

Resolution: 0.2 Infill: 10%

Notes:

Included are two versions for the character and clues trays. Version A usesabout 20% more material compared to B but also prints 20-25% faster. Itwould be my first choice as filament is dirt cheap.

[Note: In case you're wondering why the token tray is actually two piecesin the photo, it didn't fit on the bed of the only printer I had working at thetime (don't ask...), so I just cut it in half in my slicer]

Encouragement

If you like what I'm doing consider buying me a coffee or tipping.

characters_a.stl

characters_b.stl

clues_a.stl

clues_b.stl

71.4 KBupdated 9. 5. 2020

51.8 KBupdated 9. 5. 2020

48.7 KBupdated 9. 5. 2020

Find source .stl files on Thingiverse.com

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

markers.stl

qs_box.stl

qs_lid.stl