5
Summary Boo-Boo Bear, from the cartoon series by Hanna-Barbera. Boo-Boo is from Jellystone Park and is Yogi Bear's constant companion, and often acts as his conscience. He tries (usually unsuccessfully) to keep Yogi from doing things he should not do, and also to keep Yogi from getting into trouble with Ranger Smith, often saying, "Mr. Ranger isn't gonna like this, Yogi." No supports are required. If you have the proper lament colors, no painting is needed. The model is 110mm tall and is in proportion yo my Yogi Bear model: https://www.prusaprinters.org/prints/23144-yogi-bear Enjoy, and don't forget to bring along your own "pic-a-nic basket". ........................................................................................................................... Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: .2mm Inll: 10% Filament: various PLA Notes: See below for helpful print and assembly notes ............................................................................................................... Building the Model Colors reddadsteve Boo-Boo Bear VIEW IN BROWSER updated 20. 2. 2020 | published 20. 2. 2020 3D MODEL ONLY

Y Boo-Boo Bear › media › prints › 23143 › ...optional base. If you have already printed Yogi, the "base_booboo_only.stl" is designed to fit against the base for Yogi. If you

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Y Boo-Boo Bear › media › prints › 23143 › ...optional base. If you have already printed Yogi, the "base_booboo_only.stl" is designed to fit against the base for Yogi. If you

Summary

Boo-Boo Bear, from the cartoon series by Hanna-Barbera.

Boo-Boo is from Jellystone Park and is Yogi Bear's constant companion, andoften acts as his conscience. He tries (usually unsuccessfully) to keep Yogifrom doing things he should not do, and also to keep Yogi from getting intotrouble with Ranger Smith, often saying, "Mr. Ranger isn't gonna like this,Yogi."

No supports are required. If you have the proper filament colors, nopainting is needed.

The model is 110mm tall and is in proportion yo my Yogi Bear model: https://www.prusaprinters.org/prints/23144-yogi-bear

Enjoy, and don't forget to bring along your own "pic-a-nic basket".

...........................................................................................................................

Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't MatterSupports: No Resolution: .2mm Infill: 10%

Filament: various PLA Notes: See below for helpful print and assemblynotes

...............................................................................................................

Building the Model Colors

reddadsteve

Boo-Boo Bear

VIEW IN BROWSER

updated 20. 2. 2020 | published 20. 2. 2020

3D M

ODEL

ONLY

Page 2: Y Boo-Boo Bear › media › prints › 23143 › ...optional base. If you have already printed Yogi, the "base_booboo_only.stl" is designed to fit against the base for Yogi. If you

Skin: (Paramount3D PLA - Universal Beige) face .. White: (Hatchbox PLA-True White) eye_white_left eye_white_right .. Blue: Paramount3D PLA-Autobot Blue) tie_left tie_right collar .. Black: (Paramount3D PLA - Black)mouth nose eye_black_left eye_black_right eyebrow_left eyebrow_right ..Brown: (Paramount3D PLA - Military MBT Brown) head body

................................................................................................................

Printing and assembly tips

Printing tips 1-I used a raft/brim for the body part due to the small 'footprint' and larger upper portion.

2-I printed all my small pieces (eyes/eyebrows/mouth) on a raft. This alsokeeps the small left/right parts easier to maintain.

.. Assembly tips:

1-I used both E6000 and B7000 sticky craft glue. B7000 comes out of thetube a bit smoother which is helpful if you just need a small amount for asmall area (small parts). It is also less stringy which makes it even easierto use. Each glue has it's advantages. Sticky glue, in particular oversuperglue, helps significantly with handling and placing small parts.

2-The eye_blacks_left/right are different enough that you should take extracare to put them in correctly. they should be aligned with the white partand protruding a bit.

4-The model does stand by itself but is a bit top heavy, so I included anoptional base. If you have already printed Yogi, the "base_booboo_only.stl"is designed to fit against the base for Yogi. If you plan on printing bothmodels then the "base_yogi_and_booboo.stl" will hold both models. Thebase does not have dents in it so simply position the models on the baseas per the pictures.

5-Refer to the assembly diagram as well as the uploaded pictures forputting the model together. The model is meant to be glued.

Do not hesitate to ask questions, feedback is essential to making bettermodels.

Toys & Games > Action Figures & Statues

yogi cartoon bear animal

Page 3: Y Boo-Boo Bear › media › prints › 23143 › ...optional base. If you have already printed Yogi, the "base_booboo_only.stl" is designed to fit against the base for Yogi. If you

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

172.0 KBupdated 20. 2. 2020

137.6 KBupdated 20. 2. 2020

137.6 KBupdated 20. 2. 2020

118.1 KBupdated 20. 2. 2020

118.1 KBupdated 20. 2. 2020

44.9 KBupdated 20. 2. 2020

337.4 KBupdated 20. 2. 2020

37.4 KBupdated 20. 2. 2020

327.0 KBupdated 20. 2. 2020

base_booboo_only.stl

eye_black_left.stl

eye_black_right.stl

eye_white_left.stl

eye_white_right.stl

eyebrow_right.stl

base_yogi_and_booboo.stl

eyebrow_left.stl

tie_left.stl

Page 4: Y Boo-Boo Bear › media › prints › 23143 › ...optional base. If you have already printed Yogi, the "base_booboo_only.stl" is designed to fit against the base for Yogi. If you

73.3 KBupdated 20. 2. 2020

988.6 KBupdated 20. 2. 2020

130.6 KBupdated 20. 2. 2020

1.0 MBupdated 20. 2. 2020

535.6 KBupdated 20. 2. 2020

2.1 MBupdated 20. 2. 2020

4.3 MBupdated 20. 2. 2020

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

nose.stl

collar.stl

mouth.stl

face.stl

tie_right.stl

head.stl

body.stl

Page 5: Y Boo-Boo Bear › media › prints › 23143 › ...optional base. If you have already printed Yogi, the "base_booboo_only.stl" is designed to fit against the base for Yogi. If you

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition