XWEB XWEB Gateways Internet Monitoring and Control ... Sub_XJP60D_XJR40D...The protocol for the network is MODBUS-RTU. The network will include a total address count from 6 to 247,

Project Name:Location:IDN# Quanity:Catalog#

The XWEB is a Linux based WebServer that acts as a gateway to a Local Area Network of CX appliancecontrols and monitoring devices for Foodservice, Restaurants, C-Stores, Warehouses, Supermarkets, Retailinstallations where Food Safety and Energy Savings are sought. The XWEB will record, monitor andanalyze data and status, manage alarms, and optimize commercial appliances using CX controllers inapplications such as refrigeration, walk-ins, food warming/ovens, HVAC, lighting and Energy Monitoring.

The XWEB is an economical scalable solution for monitoring, monitoring and control or full control andsupervising.

HOLTSVILLE, NEW YORK 11742631-207-1200 • FAX: 631.207.0900

www.weissinstruments.com

CAT NO. XWEB XWEB Gateways

Internet Monitoring and Control Systems for HACCP and Energy Savings

XWEB System Features• Recording of all temperatures and output status in a minimum

of 15 minutes intervals, storing for 1 year.• Up to 247 addresses of controls and/or monitoring

devices.

• Manage alarms

• Linux OS system for stability

• RS485 two wire network (up to 1 mile wired and optional

1500ft RF wireless network).• Access to System is via Standard Browser such as

Explorer®, Firefox, Safari, etc.

Built-in Web Pages include:• Home Page

• Single view

• RunTime

• Layout

• Graphs

• Alarms

• Scheduler

• Parameters

• Supervision

• CRO

3/09

APPROVALS:

DATE:

XWEB300D

XWEB500D

XWEB500

XWEB3000

XWEB5000

CAT NO. XWEB XWEB Gateways

MODEL XWEB OVERVIEWThe product is a Linux based WebServer that serves as a gateway to aLAN of controls for Foodservice, Restaurants, C-Stores, Warehouses,Supermarkets, Retail or other applications. Recording and monitoring ofdata, alarms, status and interface with commercial appliances, such asrefrigeration, walk-ins, food warming/ovens, HVAC, lighting andEnergy Monitoring are desired.

MOUNTINGThe product is either Din-Rail mounted, typically in an enclosure, deskmounted in an office or rack mounted, depending on the model.

NETWORKThe product connects to a two wire RS485 network in a daisy chainup to one mile. Wireless connection is also acceptable. The protocolfor the network is MODBUS-RTU. The network will include a totaladdress count from 6 to 247, depending on requirements. A mini-mum of 1 year of data can be stored (when sampling every 15 minutes).

POWERThe product shall be powered by 24Vac /120Vac/230Vac @50/60Hz.

INPUTSThe XWEB has 6/18/36/50/100 or 247 control and monitoringnodes (addresses) depending on the model. Units with at least 36inputs also have 1digital input.

OUTPUTSThe XWEB has one System Alarm dry contact 8A SPDT Relay. Unitswith at least 36 inputs shall also have two alarm dry contacts 8ASPDT Relays.

COMMUNICATIONSThe unit has an RJ45 Ethernet connection to be connected to a LANor the Internet using a Static IP address. Optional communicationsvia Modem or GSM modem. Access will be via Standard Browser(such as Explorer®, Firefox or Safari). It has front and backsidesecurity and password protection. No software is required.

WEB PAGES• Home Page • Single View • Parameter Programming • Run Time • Graphics/Uploading data

36 and up also includes:• Layout • Scheduler • Global Commands • Performance Meter

247 version includes: • Supervision • CRO 50 & 247

WEISS INSTRUMENTS, INC., 905 WAVERLY AVE., HOLTSVILLE, NEW YORK 11742 • 631.207.1200 • FAX:631.207.0900Email: [email protected] • www.weissinstruments.com

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

WARRANTYONE YEAR

XWEB300-6/18XWEB500-100/XWEB500D-36/50/100XWEB3000-247XWEB5000-247

XWEB3000 /XWEB5000

XWEB500

XWEB300D /XWEB500D


The XJP60D is a network module that can accept up to 6 NTC Temperature inputs or 4...20mA and0/10V analog inputs from Pressure, Humidity or other inputs. The unit transfers the data to an XWEBover a RS485 Network.

The serial communication enables the XJP60D to connect to XWEB Monitoring Systems and other open systems using ModBus-RTU.

The unit includes 3 Digital Inputs typically used for Door Alarms using a magnetic door switch, or a CTto monitor other events. Alarm setpoints with delays can be assigned to each probe.



CAT NO. XJP60D I/O Probe Monitoring Modules

Record up to 6 temperatures (PSI or %RH)

Applications include Monitoring of:• Walk-in Coolers and Freezers• Reach - in's• Food Warming Cabinets• A/C and Outdoor temps• Pressure and Humidity• Level or flow (with any 4...20mA or 0/10V output)

Probe Options:• 18NB–NTC–1.5m

1/4"x1/8" Nickle Plated Brass 5Ft.

• XH10P4...20mA output 10–90% RH

• PP11 –7/160 psi• PP30 0/435 psi

4...20mA output

18NB – NTC

XH10P

PP11

3/09

APPROVALS:

DATE:MODEL RC

CAT NO. XJP60D I/O Probe Monitoring Modules

MODEL XJP60D OVERVIEWThe Monitor has three status LED’s: Power, Rx/Tx and Alarm. TheMonitor has either 6 NTC probes or 6 4...20mA or 0/10V inputs and3 Digital inputs. Alarm Setpoints with delays can be assigned to eachprobe. It shall have a RS485 Connection.

MOUNTINGThe product is 4DIN RAIL or wall mounted in a DinBox and shall haveIP65 protection from the front.

SENSORSThe product has up to 6 NTC Thermistor temperature probes, rangeof –58/230°F, which can be extended up to 300ft. using standardthermostat wire or 6 4...20mA or 0/10V inputs.

POWERThe product shall be powered by 24Vac and use a class 2 cULustransformer.

INPUTSThe control shall have 3 Digital inputs (open/closed circuit) that istypically used with a magnetic door switch to indicate door openingsor a CT to record events such as defrost or fan failure.

OUTPUTSThe XJP60D has a RS485 Serial communications output to beconnected to a XWEB System.

COMMUNICATIONSThe Control shall have a RS485 Serial Port.The two way com-munication protocol shall be MOD-BUS-RTU. The Module shallhave a settable serial address from 1 to 247. MOD-BUS Comments,Registers and Hex Codes are free and open, and are available onrequest.

PROGRAMMINGThe control is pre-programmed and pre-addressed for NTC temperaturerecording applications. The temperature shall be recorded every15 minutes. There shall be 2 levels of control parameters that arepassword protected. A Hot Key flash memory device can uploador download a program to the unit. The program shall remain ininternal memory without power.



WARRANTYONE YEAR


Applications include Control of:

• 4 zones of Lighting• Sprinkler Systems• Occupancy/Security • On/Off of Loads via Schedule• Detect when Lights are out

Options

– Occupancy Sensor– Photo Electric Sensor– Remote on/off



CAT NO. XJR40D 4 Zone Lighting Controller

Manage lights on the Internet via the XWEB

4/09

APPROVALS:

DATE:

The XJR40D is a network module that can manage up to 4 lighting zones. It features four on/off keys andLED indicators on the front. Each output can be controlled with 4 corresponding digital inputs like aremote switch, occupancy or light sensor for sunrise and sunset operation. In addition the XJR40D is con-nected to an XWEB LAN and receives on/off signals from the Scheduler Function via the RS485 Serialconnection. 24/7/365 control is easily set-up with the XWEB scheduler in order to reduce energy. The unittransfers the data to an XWEB over a RS485 Network.

An optical light sensor can also be added to detect when lights are out and initiate an alarm via theXWEB to notify the right personnel to replace/repair lights.

The XJP40D can be wall of Din Mounted or placed in a Din Enclosure.

The serial communication enables the XJP40D to connect to XWEB Monitoring Systems and other opensystems using ModBus-RTU.

Light Bank /4Light Bank /44 Zone Controller

CAT NO. XJR40D 4 Zone Lighting Controller

OVERVIEWThe Control shall have four status LED indicators corespondent to it’s four manualkey switched in addition to a Power indicator LED. The unit has 4 Digital Inputs(voltage free open/Closed circuit ) that can control each of the 4 8A relay outputs. It shall have an RS485 Connection.

MOUNTINGThe product is 4DIN RAIL or wall mounted in a DinBox and shall have IP65protection from the front.

SENSORThe product shall have up to 4 Digital Input sensors such as a photoelectric eye,occupancy sensor or remote on/off or any other open or closed Digital signal.

POWERThe product shall be powered by 120Vac or 230Vac

INPUTSThe control shall have 4 Digital input (open/closed circuit) that is typically usedwith photoelectric sensors for sunrise/sunset operation or occupancy sensors.

OUTPUTSThe XJR40D has 4 8A SPDT relay outputs.

COMMUNICATIONSThe Control shall have an RS485 Serial port. The two way communicationprotocol shall be MOD-BUS-RTU. The Module shall have a settable 4 serialaddress’s from 1 to 247. MOD-BUS Comments, Registers and Hex Codesare free and open, are available on request.

PROGRAMMINGThe control is pre-programmed and pre-addressed for 4 zone lighting. Thereshall be 2 levels of control parameters that are password protected. A HotKey flash memory device can upload or download a program to the unit.The program shall remain in internal memory without power.



WARRANTYONE YEAR

XJR40D


OUTPUTS (XR70CX) up to 41. Compressors/Solenoid Valve (one or two)2. Defrosts (electric or hot gas,one or two)3. Evaporator Fans4. Alarm or

Lights orCondenser fans orAnti-Sweat Heaters

OUTPUTS (XR30CX) up to 21. Compressors/Solenoid Valve w/Off Cycle

Defrost2. Alarm or

Lights

PROBE INPUTS1. Room (controlling)2. Evaporator (end defrost/control fans)3/4. Opt. Display/Condenser/2nd zone

The Dixell CX controls for Refrigeration replace the functions of mechanical thermostats, defrost time clocks, fancontrol and alarms, in a compact unit that displays the temperature and appliance status in an easy to read LEDDisplay. Fully programmable to meet all Medium and Low temperature applications, the CX Series Controls areUL and NSF listed and operate with line voltage power(120Vac or 230Vac) and large feature internal relays (16A) to ensure a long and reliable operation.

The serial communication enables the CX controls to connect to XWEB Monitoring Systems and other open systemsusing ModBus-RTU. Multiple temperature, Digital Inputs and up to four relay outputs allow the CX Controls to meetvarious refrigeration applications.



CAT NO. XR30CX – XR70CX Refrigeration Controllers

3/09

APPROVALS:

DATE:MODEL RC

Controls for Medium and Low Temp Applications

CAT NO. XR30CX – XR70CX Refrigeration Controllers

OVERVIEWThe product has .5” LED temperature display and up to 8 status Icons on the frontdisplay. The unit shall have a 6 keypad interface, consisting of a Up, Down,SET, DEF, Light and ON/OFF or ES Mode (Energy Savings) The control candisplay in either °F or °C and have a range of -58°F to 230°F (°C)

MOUNTINGThe product is panel mounted in a 29 x 71mm panel hole or wall mountedin a C-Box 108 x 108 x 90mm enclosure.

SENSORThe product shall have up to 2 NTC Thermistors (XR30CX) or up to 4 (XR70CX)temperature probes, which can be extended up to 300ft. The Room probe(controlling probe) is to be placed typically in the return–air, or discharge air,and the Evaporator probe to be mounted in the coldest spot of the evaporator.Optional third and fourth probes can be used for display or condenser.

POWERThe product shall be powered by 120Vac or 230Vac (+/-10% 50/60Hz).

INPUTSThe CX control shall have one Digital Input (open/closed circuit) that is typicallyused with a magnetic door switch to indicate door openings.

OUTPUTSThe XR30CX has two relay outputs. Compressor (or solenoid valve) rated at16FLA/96LRA plus a second relay (8A) for alarm, light or fan.The XR70CX has four relay outputs. Compressor 16FLA/60LRA, Defrost 8A,Fan 5A, plus a fourth 8A relay, that can be configured as: Alarm/Light/2ndComp/2nd Def/Anti-Sweat heater.

COMMUNICATIONSThe Product has a TTL Serial port. A XJ485CX adaptor is required. The twoway communication protocol is MOD-BUS-RTU. The Control has a settableserial address of 1-247. MOD-BUS–Comments, Registers and Hex Codes arefree and open (available on request.)

PROGRAMMINGThe control is pre-programmed for Medium temp applications (XR30CX), andLow Temp applications (XR70CX). There are 2 levels of parameters that arepassword protected. The Keyboard can also be locked. A Hot Key flash memorydevice can upload or download a program to the unit. The program shall remainin internal memory without power.



WARRANTYONE YEAR

XR30CX

XR70CX

Dimensions in mm.

Documents

XWEB XWEB Gateways Internet Monitoring and Control ... Sub_XJP60D_XJR40D...The protocol for the network is MODBUS-RTU. The network will include a total address count from 6 to 247,