Upload
truongdan
View
218
Download
0
Embed Size (px)
Citation preview
exploded view
XS lInked CaBle SySTem on STeel Roof
2 For example with use of an XS Intermediate 800-869-2080 RIGIdlIfelIneS.Com
XS Linked Cable System
For example: XS Intermediate
XS Bending Kit
Capping Sheet
XS Toggle Anchor
XS Base Plate
Waterproofing Membrane
Insulation
Steel (plate) Structure
Rigorous testing has proven the strength and resistance of the XS Linked Cable System on a steel roof. The main components of an
XS Linked Cable System are the permanent XS Impact anchorage points and the XS Slider. These components enable free movement
along the system. The lifeline adapts smoothly to steel roofing materials to protect workers from fall hazards. Thanks to the XS Linked
Cable System, risks are minimized without compromising a worker’s movement.
parts & materials
*Denotes Product Number for Stainless Steel AISI 316 Model
drawings & Impressions
RIGIdlIfelIneS.Com 800-869-2080 For example with use of an XS Intermediate 3
XS lInked CaBle SySTem on STeel Roof
11125 XS Bending Kit Stainless Steel AISI 304 *11126
11110 XS Base Plate Aluminum (For other finishes, contact inside sales)
11300 XS Toggle Anchor Stainless Steel AISI 304 *11301
12400 XS Intermediate Stainless Steel AISI 304 *12401
13100 XS Cable Stainless Steel AISI 316
• Suitable for steel roofs min. 0.75mm thick
• By mounting on top of the insulation and roofing,
you minimize damage to the roof
• All XSPlatforms anchorages are tested according to: ANSI/
ASSE Z359.1 2007, OSHA 1910.66 and 1926.502, CAN/CSA
Z259, and EN795 class A1 and C.
• Also available as a Linked Pro System
paRTS & maTeRIalS
XS lInked CaBle SySTem on STeel Roof
4 For example with use of an XS Intermediate 800-869-2080 RIGIdlIfelIneS.Com
XS Impact - 11100The XS Impact is used to support the XS Linked System, as a stand-alone
anchorage point and as an anchorage point in horizontal temporary lifeline
systems. The anchorage point is tested according the EN795 in classes A1 and C.
The anchor will not be activated until a force of 3kN is applied to the anchor.
The anchor is tested against a continuous force of 10kN. The ultimate strength
after deployment is greater than 20kN.
XS Toggle anchor - 11300The XS Toggle Anchor is used for fixing the anchorage point to the roof. Its
special shape allows the anchor to be pushed through the roofing.
XS Terminal (hold) - 12235One end is swaged to the lifeline. The other end is connected to an
XS Impact anchorage point, with a stainless steel AISI 304 socket head screw
M12 x 35 mm.
XS Tensioner II System - 12300Consists of XS Startpoint, XS Hold, and XS Tensioner.
The XS Startpoint (and stainless steel threaded shaft) acts as the attachment
point between the XS Hold and the XS Tensioner.
The XS Tensioner is used for tightening the cable. Correct tension of the cable
ensures correct functioning of all system components in the event of a fall.
XS point - 13330The XS Point is a special entrance and exit point which makes it impossible for
the slider to be disconnected outside of the XS Point. The XS Point can only be
used in combination with the XS Slider Pro.
RIGIdlIfelIneS.Com 800-869-2080 For example with use of an XS Intermediate 5
parts & materials
XS lInked CaBle SySTem on STeel Roof
XS Intermediate - 12400The XS Intermediate is used to position the lifeline cable. It is shaped specifically
to allow a user to move safely without needing to disconnect from the lifeline.
It can be installed in many different configurations and at regular intervals to
ensure the optimum distribution of forces along the lifeline.
XS edge 45o - 12500The XS Edge 45° enables the direction of the lifeline cable to be changed. It is
shaped specifically to allow a user to move safely without needing to disconnect
from the lifeline.
XS edge 90o - 12600The XS Edge 90° enables the direction of the lifeline cable to be changed. It is
shaped specifically to allow a user to move safely without needing to disconnect
from the lifeline.
XS Slider - 12810The XS Slider allows a user to move easily along the cable. Its unique shape and
design enables smooth passage through brackets without disconnecting from
the line. Hooking and unhooking the XS Slider is possible at any location on
the wire rope. The locking system of the runner eliminates any possibility of
incorrect manipulation during connection to the cable.
XS Slider pro - 12820The XS Slider Pro can easily make an angle up to 40° thanks to the addition of
the integrated guiding sleeve (a “rotating tube”). The guiding sleeve ensures
that the XS Slider Pro passes brackets and corners more easily when working at
an angle. The XS Slider Pro can only be used in combination with the XS Point.
The XS Point is a special entrance and exit point that makes it impossible to
disconnect the XS Slider Pro elsewhere on the system.
XS lInked CaBle SySTem on ConCReTe Roof
XS Linked Cable System
For example: XS Edge 90o
XS Bending Kit
Capping Sheet
XS Mechanical Anchor
XS Base Plate
Waterproofing Membrane
Insulation
Concrete Structure
When installing an XSPlatforms system on concrete, the XS Linked Cable System uses the permanent XS Mechanical Anchor instead of
the XS Toggle Anchor. This device has been designed to provide a solid anchorage point specifically for solid and hollow core concrete
installations. This system allows workers to move with protected freedom as they perform various tasks at height.
exploded view
6 For example installation on solid concrete with use of an XS Edge 90o 800-869-2080 RIGIdlIfelIneS.Com
RIGIdlIfelIneS.Com 800-869-2080 For example installation on solid concrete with use of an XS Edge 90o 7
*Denotes Product Number for Stainless Steel AISI 316 Model
drawings & Impressions
11125 XS Bending Kit Stainless Steel AISI 304 *11126
11110 XS Base Plate Aluminum (For other finishes, contact inside sales)
11400 XS Mechanical Anchor Stainless Steel AISI 304 *11401 Galvanized steel
12600 XS Edge 90o Stainless Steel AISI 304 *12601
13100 XS Cable Stainless Steel AISI 316
• Suitable for: regular concrete and hollow core concrete
(strength class at least C40/50)
• By mounting on top of the insulation and roofing, you
minimize damage to the roof
• All XSPlatforms anchorages are tested according to: ANSI/
ASSE Z359.1 2007, OSHA 1910.66 and 1926.502, CAN/CSA
Z259, and EN795 class A1 and C.
• Also available as a Linked Pro System
XS lInked CaBle SySTem on ConCReTe Roof
XS lInked CaBle SySTem on ConCReTe Roof
paRTS & maTeRIalS XS Impact - 11100The XS Impact is used to support the XS Linked Cable System, as a stand-alone
anchorage point and as an anchorage point in horizontal temporary lifeline
systems. The anchorage point is tested according the EN795 in classes A1 and C.
The anchor will not be activated until a force of 3kN is applied to the anchor.
The anchor is tested against a continuous force of 10kN. The ultimate strength
after deployment is greater than 20kN.
XS mechanical anchor - 11400The XS Mechanical Anchor is used for fixing the anchorage point to the
roof. It is a Fischer anchor specifically developed for high strength mounting
in concrete.
XS Terminal (hold) - 12235One end is swaged to the lifeline. The other end is connected to an
XS Impact anchorage point with a stainless steel AISI 304 socket head screw
M12 x 35 mm.
XS Tensioner II System - 12300Consists of the XS Startpoint, XS Hold, and XS Tensioner.
The XS Startpoint (and stainless steel threaded shaft) acts as the attachment
point between the XS Hold and the XS Tensioner.
The XS Tensioner is used for tightening the cable. Correct tension of the cable
ensures correct functioning of all system components in the event of a fall.
XS point - 13330The XS Point is a special entrance and exit point that makes it impossible for the
slider to be disconnected outside of the XS Point. The XS Point can only be used
in combination with the XS Slider Pro.
8 For example installation on solid concrete with use of an XS Edge 90o 800-869-2080 RIGIdlIfelIneS.Com
RIGIdlIfelIneS.Com 800-869-2080 For example installation on solid concrete with use of an XS Edge 90o 9
XS lInked CaBle SySTem on ConCReTe Roof
parts & materials XS Intermediate - 12400The XS Intermediate is used to position the lifeline cable. It is shaped specifically
to allow a user to move safely without needing to disconnect from the lifeline.
It can be installed in many different configurations and at regular intervals to
ensure the optimum distribution of forces along the lifeline.
XS edge 45o - 12500The XS Edge 45° enables the direction of the lifeline cable to be changed. It is
shaped specifically to allow a user to move safely without needing to disconnect
from the lifeline.
XS edge 90o - 12600The XS Edge 90° enables the direction of the lifeline cable to be changed. It is
shaped specifically to allow a user to move safely without needing to disconnect
from the lifeline.
XS Slider - 12810The XS Slider allows a user to move easily along the cable. Its unique shape and
design enable smooth passage through brackets without disconnecting from
the line. Hooking and unhooking the XS Slider is possible at any location on
the wire rope. The locking system of the runner eliminates any possibility of
incorrect manipulation during connection to the cable.
XS Slider pro - 12820The XS Slider Pro can easily make an angle of up to 40° thanks to the addition
of the integrated guiding sleeve (a “rotating tube”). The guiding sleeve ensures
that the XS Slider Pro passes brackets and corners more easily when working at
an angle. The XS Slider Pro can only be used in combination with the XS Point.
The XS Point is a special entrance and exit point that makes it impossible to
disconnect the XS Slider Pro elsewhere on the system.
XS lInked CaBle SySTem on wooden Roof
XS Linked Component
For example: XS Terminal
XS Bending Kit
Capping Sheet
XS Toggle Anchor
Extremity and Corner Fixation
XS Base Plate
XS Base Plate Extra (18 mm)
Waterproofing Membrane
Insulation
Wooden Structure
exploded view
Installing an XS Linked Cable System on a wooden roof is slightly different from other roof materials. Once the permanent XS Toggle
Anchor is in place, the XS Base Plate Extra is used for additional stability on soft roof materials like wood. Using this system will allow
workers to move freely as they perform tasks.
10 For example installation on 18 mm plywood with use of an XS Base Plate Extra (18 mm) and XS Terminal 800-869-2080 RIGIdlIfelIneS.Com
RIGIdlIfelIneS.Com 800-869-2080 For example installation on 18 mm plywood with use of an XS Base Plate Extra (18 mm) and XS Terminal 11
parts & materials
*Denotes Product Number for Stainless Steel AISI 316 Model
drawings & Impressions
11125 XS Bending Kit Stainless Steel AISI 304 *11126
11110 XS Base Plate Aluminum (For other finishes, contact inside sales)
11300 XS Toggle Anchor Stainless Steel AISI 304 *11301
11700 XS Base Plate Extra (18 mm) Aluminum
12235 XS Terminal (hold) Stainless Steel AISI 304 *12236
13100 XS Cable Stainless Steel AISI 316
• Suitable for plywood: min. 12 mm (in connection with the
12 mm XS Base Plate Extra), min. 18 mm (in connection with
18 mm XS Base Plate Extra)
• By mounting on top of the insulation and roofing, you
minimize damage to the roof
• All XSPlatforms anchorages are tested according to: ANSI/
ASSE Z359.1 2007, OSHA 1910.66 and 1926.502, CAN/CSA
Z259, and EN795 class A1 and C.
• Also available as a Linked Pro System
XS lInked CaBle SySTem on wooden Roof
XS lInked CaBle SySTem on wooden Roof
parts & materials XS Impact - 11100The XS Impact is used to support the XS Linked Cable System, as a stand-alone
anchorage point and as an anchorage point in horizontal temporary lifeline
systems. The anchorage point is tested according to the EN795 in classes A1 and C.
The anchor will not be activated until a force of 3kN is applied to the anchor.
The anchor is tested against a continuous force of 10kN. The ultimate strength
after deployment is greater than 20kN.
XS Toggle anchor - 11301The XS Toggle Anchor is used for fixing the anchorage point to the roof. Its
special shape allows the anchor to be pushed through the roofing.
extremity and Corner fixation - 11500The Extremity and Corner Fixation is a set of screws used for fixing corners
and extremity posts of the XS Linked Cable System on steel and wooden
roofs. The screws fit the holes in the corner of the XS Base Plate and XS Base
Plate Extra.
The length of the screws depends on the thickness of the insulation material.
The screws provided are suitable for most applications. If you require different
screws, please contact our sales department. Make sure that the Ø6 screws you
use are at least 35 mm longer than the thickness of the insulation.
XS Base plate extra (18 mm) - 11700The XS Base Plate Extra (18 mm) is used beneath the XS Base Plate for installing
the XS Impact, XS Globe, and XS Impact 360° on wooden roofs.
12 For example installation on 18 mm plywood with use of an XS Base Plate Extra (18 mm) and XS Terminal 800-869-2080 RIGIdlIfelIneS.Com
RIGIdlIfelIneS.Com 800-869-2080 For example installation on 18 mm plywood with use of an XS Base Plate Extra (18 mm) and XS Terminal 13
XS lInked CaBle SySTem on wooden Roof
parts & materials XS Base plate extra (12 mm) - 11710The XS Base Plate Extra (12 mm) is used under the XS Base Plate to assemble the
XS Impact, XS Globe, and XS Impact 360 ° on (12 mm) plywood roofs. The aluminum
adapter plate is mounted to the roof using four M10 XS Toggle Anchors.
XS Terminal (hold) - 12230One end is swaged to the lifeline. The other end is connected to an XS Impact
anchorage point, with a stainless steel AISI 304 socket head screw M12 x 35 mm.
XS Tensioner II System - 12300Consists of the XS Startpoint, XS Hold, and XS Tensioner. The XS Startpoint (and
stainless steel threaded shaft) acts as the attachment point between the XS Hold
and the XS Tensioner. The XS Tensioner is used for tightening the cable. Correct
tension of the cable ensures correct functioning of all system components in the
event of a fall.
XS point - 13330The XS Point is a special entrance and exit point that makes it impossible for the
slider to be disconnected outside of the XS Point. The XS Point can only be used
in combination with the XS Slider Pro.
XS Intermediate - 12400The XS Intermediate is used to position the lifeline cable. It is shaped specifically
to allow a user to move safely without needing to disconnect from the lifeline.
It can be installed in many different configurations and at regular intervals to
ensure the optimum distribution of forces along the lifeline.
XS lInked CaBle SySTem on wooden Roof
parts & materials
14 For example installation on 18 mm plywood with use of an XS Base Plate Extra (18 mm) and XS Terminal 800-869-2080 RIGIdlIfelIneS.Com
XS edge 45o - 12500The XS Edge 45° enables the direction of the lifeline cable to be changed. It is
shaped specifically to allow a user to move safely without needing to disconnect
from the lifeline.
XS edge 90o - 12600The XS Edge 90° enables the direction of the lifeline cable to be changed. It is
shaped specifically to allow a user to move safely without needing to disconnect
from the lifeline.
XS Slider - 12810The XS Slider allows a user to move easily along the cable. Its unique shape and
design enable smooth passage through brackets without disconnecting from
the line. Hooking and unhooking the XS Slider is possible at any location on
the wire rope. The locking system of the runner eliminates any possibility of
incorrect manipulation during connection to the cable.
XS Slider pro - 12820The XS Slider Pro can easily make an angle up to 40° thanks to the addition of
the integrated guiding sleeve (a “rotating tube”). The guiding sleeve ensures
that the XS Slider Pro passes brackets and corners more easily when working at
an angle. The XS Slider Pro can only be used in combination with the XS Point.
The XS Point is a special entrance and exit point that makes it impossible to dis-
connect the XS Slider Pro elsewhere on the system.
RIGIdlIfelIneS.Com 800-869-2080 For example installation on 18 mm plywood with use of an XS Base Plate Extra (18 mm) and XS Terminal 15
XS Safety Eye 360o
XS Bending Kit
Capping Sheet
XS Toggle Anchor
XS Base Plate
Waterproofing Membrane
Insulation
Steel (plate) Structure
XS GloBe & XS ImpaCT 360o on STeel Roof
exploded view
The XS Globe anchorage point is comprised of two main components: the XS Globe Eye and the XS Base Plate, which is fixed to the
roof and holds the XS Globe Eye. The XS Globe is used as a stand-alone anchorage point and/or as an anchorage point to Personal
Protective Equipment (PPE). The XS Impact 360° combines the XS Impact with the XS Globe anchorage point and absorbs the shock
of a fall. The XS Base Plate is fixed to the roof and holds the XS Bending Kit. These anchorage points can also be installed on the
XS Xtrusion.
16 For example an XS Impact 360o installation on steel roofing 800-869-2080 RIGIdlIfelIneS.Com
RIGIdlIfelIneS.Com 800-869-2080 For example a XS Impact 360o installation on steel roofing 17
parts & materials
*Denotes Product Number for Stainless Steel AISI 316 Model
drawings & Impressions
11125 XS Bending Kit Stainless Steel AISI 304 *11126
11110 XS Base Plate Aluminum (For other finishes, contact inside sales)
11210 XS Globe Eye Stainless Steel AISI 304 *11211
11260 XS Safety Eye 360o Stainless Steel AISI 304 *11261
11300 XS Toggle Anchor Stainless Steel AISI 304 *11301
11400 XS Mechanical Anchor Stainless Steel AISI 304 *11401 Galvanized steel
11700 XS Base Plate Extra (18 mm) Aluminum
• Suitable for: all types of roofs or systems
• By mounting on top of the insulation and roofing, you
minimize the damage to the roof
• An XS Globe Eye/XS Safety Eye 360o can be used in every
direction, to give you maximum freedom of movement
• All XSPlatforms anchorages are tested according to: ANSI/
ASSE Z359.1 2007, OSHA 1910.66 and 1926.502, CAN/CSA
Z259, and EN795 class A1 and C.
XS GloBe & XS ImpaCT 360o
XS GloBe & XS ImpaCT 360o
parts & materials XS Impact - 11100The XS Impact is used to support the XS Linked Cable System as a stand-alone
anchorage point and as an anchorage point in horizontal temporary lifeline
systems. The anchorage point is tested according the EN795 in classes A1 and C.
The anchor will not be activated until a force of 3kN is applied to the anchor.
The anchor is tested against a continuous force of 10kN. The ultimate strength
after deployment is greater than 20kN.
XS Base plate - 11110Attachment of the XS Base Plate depends on the roof type. Use the XS Toggle
Anchor (11300) with wooden or steel roofs and the XS Mechanical Anchor
(11400) with concrete or hollow section concrete roofs. The anchor is tested
against a continuous force of 10kN. The ultimate strength after deployment is
greater than 20kN.
XS Globe eye - 11210The XS Globe Eye is used as a stand-alone anchorage point and as an anchorage
point to PPE. The anchorage point is tested according to the EN795 in classes A1
and C.
XS Safety eye 360o - 11260The XS Safety Eye 360° is used as a stand-alone anchorage point and as an
anchorage point to PPE. The anchorage point is tested according to the EN795
in classes A1 and C.
The anchor will not be activated until a force of 3kN is applied to the anchor.
The anchor is tested against a continuous force of 10kN. The ultimate strength
after deployment is greater than 20kN.
XS Toggle anchor - 11300The XS Toggle Anchor is used for fixing the anchorage point to the roof. Its
special shape allows the anchor to be pushed through the roofing.
18 For example an XS Impact 360o installation on steel roofing 800-869-2080 RIGIdlIfelIneS.Com
RIGIdlIfelIneS.Com 800-869-2080 For example an XS Impact 360o installation on steel roofing 19
XS GloBe & XS ImpaCT 360o
parts & materials XS mechanical anchor - 11400The XS Mechanical Anchor is used for fixing the anchorage point to the roof. It is
a Fischer Anchor specifically developed for high-strength mounting in concrete.
extremity and Corner fixation - 11500The extremity and corner fixation is a set of screws used for fixing corners and
extremity posts of the XS Linked lifeline system on steel and wooden roofs. The
screws fit the holes in the corner of the XS Base Plate and XS Base Plate Extra.
The length of the screws depends on the thickness of the insulation material.
The screws provided are suitable for most applications. If you require different
screws, please contact our sales department. Make sure that the Ø6 screws you
use are at least 35 mm longer than the thickness of the insulation.
XS Base plate extra (18 mm) - 11700The XS Base Plate Extra (18 mm) is used beneath the XS Base Plate for installing
the XS Impact, XS Globe, and XS Impact 360° on wooden roofs.
XS Base plate extra (12 mm) - 11710The XS Base Plate Extra (12 mm) is used under the XS Base Plate to assemble the
XS Impact, XS Globe, and XS Impact 360 ° to (12 mm) plywood roofs. The aluminum
adapter plate is mounted to the roof using four M10 XS Toggle Anchors.
XS Xtrusion - 11800The XS Xtrusion is used to support the XS Linked Cable System. It could also be used
as a stand-alone anchorage point and as an anchorage point in a horizontal
temporary anchor line and in combination with an XS Safety Eye 3600.
XS lInked CaBle SySTem on XS XTRuSIon
XS Linked Component
For example: XS Terminal
XS Bending Kit
Rings & Nuts
Deck Socket
XS Xtrusion (base deck)
Secret Fix Kit
Secret Fix Roofing
exploded view
An XS Linked Cable System is comprised of different components that form a horizontal lifeline system. The main components of an
XS Linked Cable System are the XS Impact anchorage points and the XS Slider that enables free movement along the system. The
lifeline allows horizontal movement when working at heights. The system can be fixed to almost any type of roof construction. It is
installed as a safeguard in places where working at heights can present risks. Risks are minimized, and the ability to work at the
required height is not compromised.
20 For example installation on secret fix roofing with use of an XS Terminal (hold) 800-869-2080 RIGIdlIfelIneS.Com
RIGIdlIfelIneS.Com 800-869-2080 For example installation on secret fix roofing with use of an XS Terminal (hold) 21
parts & materials
*Denotes Product Number for Stainless Steel AISI 316 Model
drawings & Impressions
11125 XS Bending kit Stainless Steel AISI 304 *11126
11800 XS Xtrusion Stainless Steel AISI 304 *11801 Aluminum
11880 XS Secret Fix Kit Stainless Steel AISI 304
12235 XS Terminal (hold) Stainless Steel AISI 304 *12236
13100 XS Cable Stainless Steel AISI 316
• Suitable for roofs with: (min. 1 mm) Kalzip, (min. 1 mm)
built-up-on-site and secret fix profiles
• Can serve as a stand-alone anchoring point on a Kalzip roof
or as support for the XS Linked System
• Adjustable width (depending on profile distance)
• The XS Xtrusion was also tested on 0.8 mm zinc roof with
double standing seam
XS lInked CaBle SySTem on XS XTRuSIon
XS lInked CaBle SySTem on XS XTRuSIon
parts & materials XS Xtrusion - 11800The XS Xtrusion is used to support the XS Linked Cable System. It could also be
used as a stand-alone anchorage point and as an anchorage point in horizontal
temporary anchor line and in combination with an XS Safety Eye 3600.
XS Standing Seam kit 1 - 11840The XS Standing Seam Kit 1 attaches the XS Xtrusion anchoring point to roofs
with (min. 1 mm) Kalzip profiles. The XS Standing Seam Kit 1 is fixed to the
XS Xtrusion by 4 M10 bolts and mounted to the standing seam roofing with
4 x screws.
XS Standing Seam kit 2 - 11850The XS Standing Seam Kit 2 attaches the XS Xtrusion anchoring point to zinc or
copper roofs. This “U-clip” can be mounted either vertically or horizontally. The
XS Standing Seam Kit 2 is fixed to the XS Xtrusion by 4 M10 bolts and mounted
to the standing seam roofing with 4 x screws.
XS Standing Seam kit 3 - 11860The XS Standing Seam Kit 3 attaches the XS Xtrusion anchoring point to zinc
or copper roofs (min. 0.8 mm). The XS Standing Seam Kit 3 is fixed to the
XS Xtrusion by 4 M10 bolts and mounted to the standing seam roofing with
4 x screws.
22 For example installation on secret fix roofing with use of an XS Terminal (hold) 800-869-2080 RIGIdlIfelIneS.Com
RIGIdlIfelIneS.Com 800-869-2080 For example installation on secret fix roofing with use of an XS Terminal (hold) 23
XS lInked CaBle SySTem on XS XTRuSIon
parts & materials XS Built-up-on-Site kit - 11870The XS Built-Up-On-Site-Kit is used to mount the XS Xtrusion anchorage
point on a roof constructed using built-up-on-site roofing. It can be used as a
stand-alone anchorage point or as a support for a XS Linked Cable System. The
XS Built-Up-On-Site-Kit is fixed to the XS Xtrusion by 4 mounting plates and
mounted to the built-up-on-site roofing with 4 x 6 blind rivets.
XS Secret fix kit - 11880The XS Secret Fix Kit is used to mount the XS Xtrusion anchorage point on a roof
made up of a secret fix profile. It can be used as a stand-alone anchorage point
or as a support for a XS Linked Cable System. The XS Secret Fix Kit is fixed to the
XS Xtrusion by 4 mounting plates and mounted to the secret fix roofing with 4
x 6 blind rivets.
XS Terminal (hold) - 12235One end is swaged to the lifeline. The other end is connected to an XS Impact
anchorage point with a stainless steel AISI 304 socket head screw M12 x 35 mm.
XS Tensioner II System - 12300Consists of XS Startpoint, XS Hold, and XS Tensioner. The XS Startpoint (and
stainless steel threaded shaft) acts as the attachment point between the XS Hold
and the XS Tensioner. The XS Tensioner is used for tightening the cable. Correct
tension of the cable ensures correct functioning of all system components in the
event of a fall.
XS point - 13320The XS Point is a special entrance and exit point that makes it impossible for the
slider to be disconnected outside of the XS Point. The XS Point can only be used
in combination with the XS Slider Pro.
parts & materials XS Intermediate - 12400The XS Intermediate is used to position the lifeline cable. It is shaped specifically
to allow a user to move safely without needing to disconnect from the lifeline.
It can be installed in many different configurations and at regular intervals to
ensure the optimum distribution of forces along the lifeline.
XS edge 45o - 12500The XS Edge 45° enables the direction of the lifeline cable to be changed. It is
shaped specifically to allow a user to move safely without needing to disconnect
from the lifeline.
XS edge 90o - 12600The XS Edge 90° enables the direction of the lifeline cable to be changed. It is
shaped specifically to allow a user to move safely without needing to disconnect
from the lifeline.
XS Slider - 12810The XS Slider allows a user to move easily along the cable. Its unique shape and
design enable smooth passage through brackets without disconnecting from
the line. Hooking and unhooking the XS Slider is possible at any location on
the wire rope. The locking system of the runner eliminates any possibility of
incorrect manipulation during connection to the cable.
XS Slider pro - 12820The XS Slider Pro can easily make an angle up to 40° thanks to the addition of
the integrated guiding sleeve (a “rotating tube”). The guiding sleeve ensures
that the XS Slider Pro passes brackets and corners more easily when working at
an angle. The XS Slider Pro can only be used in combination with the XS Point.
The XS Point is a special entrance and exit point that makes it impossible to
disconnect the XS Slider Pro elsewhere on the system.
XS lInked CaBle SySTem on XS XTRuSIon
24 For example installation on secret fix roofing with use of an XS Terminal (hold) 800-869-2080 RIGIdlIfelIneS.Com
RIGIdlIfelIneS.Com 800-869-2080 For example installation on secret fix roofing with use of an XS Terminal (hold) 25
Rigid lifelines™ is a north american leader in turnkey fall protection solutions. we manufacture and distribute a wide range of fall arrest,
fall restraint, fall prevention, hard goods, soft goods, and accessories. Rigid lifelines engineers superior systems and solutions for
common problems in fall protection. These systems are ideal for keeping industrial employees protected while working at height. Rigid
lifelines manufactures fall protection systems in two locations in the united States—morgantown, pennsylvania and las vegas, nevada.
we are proud to be a Certified welding fabricator in accordance with the american welding Society. plus, all of our fall protection
systems exceed oSHa and anSI requirements.
Rigid Lifelines is proud to offer fall protection solutions for any location inside or outside of industrial and construction facilities.
Our product line includes:
enGIneeRed TRaCk Rigid Lifelines proudly
engineers rigid track systems
for various applications. Steel,
stainless steel, or aluminum
enclosed tracks can be used to
adapt to the needs of your
facility. To ensure complete
compliance, all of our systems
meet or exceed OSHA and ANSI
requirements. Plus, our
engineered track systems have
superior warranties.
XSplaTfoRmS RoofTop SoluTIonS XSPlatforms uses advanced fall
protection technology to
provide rooftop solutions for
different types of roofing
materials. The patented design
of the anchorage device allows
for faster and less invasive
installation. Plus, each
anchorage can cover longer
distances in comparison to
other rooftop systems.
SofT GoodSAs part of our comprehensive
line of fall protection solutions,
Rigid Lifelines is proud to offer
several types of full body
harnesses, energy absorbing
lanyards, and self-retracting
lifelines. Our harnesses use the
latest technology to provide a
secure and comfortable fit.
dealeR TRaInInGOur experienced staff has
developed a comprehensive fall
protection training program
for our dealers. Our program
covers: OSHA and ANSI Z359
requirements for General Industry
and Construction, properly
fitting a full body harness,
identifying fall hazards, system
installation considerations, and
a basic overview of all Rigid
Lifelines products.
RIGIdlIfelIneS.Com 800-869-2080 27
aBouT RIGId lIfelIneS™
Form # RLL-XSO-0411 V1
604 Hemlock Road Morgantown, PA 19543
800-869-2080 610-286-7200
610-286-0085 Fax