· XLS file · Web view · 2008-05-12Summary Sheet BOQ INDEX Providing and making drainage provision for the risers with necessary 40 mm dia pipe, ball valve etc as required. Maximum

-1-

PROCESSING FACILITY AT "ERA LAUREL GARDEN " SIRSA-1,HARIYANA.

BILL OF QUANTITIES(PLUMBING AND FIREFIGHTING WORKS)

INDEX

SL.NO. DESCRIPTION PAGE NO.

1.0 SEWERAGE BOQ-1 TO BOQ-3

2.0 SOIL,WASTE & VENT PIPE AND FITTINGS BOQ-3 TO BOQ-6

3.0 WATER SUPPLY BOQ-6 TO BOQ-10

4.0 SANITARY FIXTURES BOQ-10 TO BOQ-13

5.0 RAIN WATER PIPES AND FITTINGS BOQ-13 TO BOQ-14

6.0 STORM WATER SYSTEM BOQ-14 TO BOQ-15

7.0 PUMPING SYSTEMS BOQ-15 TO BOQ-17

8.0 FIRE FIGHTING SYSTEMS BOQ-17 TO BOQ-25

-1-


BOQ-3



S.No. Description Quantity Unit Rate (Rs.)

1.0 SEWERAGE

1.1

a) 100 mm diameter 10 m 125 1250.00

1.2

a) 100 mm dia. S.W. pipe 10 m 260 2600.00

1.3

a) 150 x 100 mm size P type with 4 Nos. 600 2400.00

1.4

a) 150mm dia RCC pipe 25 M 225 5625.00

b) 250mm dia RCC pipe 160 M 275 44000.00

1.5

Amount (Rs.)

Providing, laying and jointing glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete.

Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete as per specifications.

Providing and fixing square mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonry chamber with bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per specifications.

Providing and laying non-pressure NP-2 class (light duty) RCC Pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) all round RCC NP-2 pipes including bed concrete as per standard design.

BOQ-4



S.No. Description Quantity Unit Rate (Rs.) Amount (Rs.)

a) 150mm RCC pipe. 25 M 325 8125.00

b) 250mm dia RCC pipe 160 M 450 72000.00

1.6

a)

With F.P.S. bricks 6 Nos. 4500 27000.00

b) Extra for depth for manholes:Size 90X80 cm-with F.P.S. bricks 0.5 Each 2000 1000.00

Contracting brick masonary manhole with 75 class designation bricks in cement mortar 1:5 (1cement :5 fine sand)RCC top slab with 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concret 1:4:8 mix (1 cement: 4 coarse sand:8 graded stone aggregate 40 mm nominal size) including execlavation and refilling inside plastering 12mm thick with cement motare 1:3(1 cement:3 coarse sand) finished with a floting coat of neat cement and making channels in cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm norminal size) complete with MS foot rests neatly finished all as per specifications.

Inside size 900 mmx800mm and 600mm deep including C.I. cover with frame (medium duty) 500mm internal diameter,total weight of cover with frame to be not less than 116kg (weight of cover 58kg and weight of frame 58kg).

BOQ-5




1.7

a)

With F.P.S. bricks class designation 75 4 m 6000 24000.00

1.8

a) 185 m 100 18500.00

Total of Sewerage carried over to Summary 206500.00

2.0 SOIL, WASTE, VENT PIPES & FITTINGS

Constructing brick masonary circular type manhole 0.91m internal dia at bottom and 0.56m dia at in cement mortar 1:4(1 cement:4 coarse sand), in side cement plaster 12mm thick with cement mortar 1:3(1 cement,:3 coarse sand) finished with a floating coast of near of near cement, foundation concret 1:3:6 mix (1 cement:3 coarse sand:6 graded stone aggregate 40mm nominal size), and making necessafy channel in cement concret 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design.

0.91m. Deep with S.F.R.C. cover and frame (heavy duty HD-20 grade desingnation) 560mm internal diameter conforming to I.S.12592, total weight of cover and frame to be not less than 182kg., fixed in cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size)including centering shuttering all complete. (Execlavation,foot reste and 12mm thick cement plaster at the external surface shall be paid for separetely.

Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 2.0 m including taking out the excavated soil,and then backfilling the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 100m.

All kind of soils (Pipes exceeding 80mm dia but not exceeding 300 mm dia).

BOQ-6




2.1

a) 75 mm dia 50 m 410 20500.00

b) 100 mm dia 545 m 475 258875.00

2.2

a) 100 mm inlet and 100 mm outlet 10 Nos. 315 3150.00

b) 100 mm inlet and 75 mm outlet 25 Nos. 270 6750.00

2.3

a) 32 mm nominal bore. 45 m 190 8550.00

b) 40 mm nominal bore. 45 m 280 12600.00

C) 50 mm nominal bore. 25 m 280 7000.00

2.4

a) 100 mm dia 405 m 15 6075.00

Providing, fixing and testing cast iron soil waste and vent pipes (IS:3989) including all fittings such as bends, junctions, inspection doors, offsets, cowls, access pieces/plugs, brass floor cleanouts etc. clamps/ structural steel supports as required/directed at site, jointing with refined pig lead with deep lead joints including cutting holes in walls and making good the same.

Providing and fixing heavy cast iron trap of self cleaning design with C.P. grating with or without vent arm complete, including cost of cutting and making good the walls & floors.

Providing, fixing and testing GI pipes (Medium class) conforming to IS:1239 complete with malleable cast iron fitting conforming to IS:1879 such as tees, crosses, plugs, sockets, elbows, reducers, unions, sleeve pieces, including cutting and making good the walls, floors, RCC work etc. cutting chases and filling the same as required.

Painting sand cast iron/soil, waste vent pipes and fittings with enamel paint of any colour such as chocolate, grey or buff etc. over a coat of primer (or approved quality) for new work.

BOQ-7




2.5

a) 32 mm dia 45 m 8 360.00

b) 40 mm dia 45 m 12 540.00

b) 50 mm dia 25 m 12 300.00

2.6 35 Nos. 600 21000.00

2.7

a) 140 m 325 45500.00

2.8

a) 100 mm dia 30 Nos. 500 15000.00

2.9

a) 100mm dia 48 Metre 1000 48000.00

Painting G.I. Pipes with two coats of bitumastic paint, wrapping with one layer of polythene tape and applying a final coat of bitumastic paint. (waste pipes in wall chase and under floors)

Providing and fixing 100 mm dia GI inlet fitting of standard design and as shown in drawing with two-three inlets, suitable for 32mm to 50mm GI pipes and 75mm to 100mm outlet.

Providing and laying cement concrete 1:2:4 mix (1 cement: 2 coarse sand : 4 sand aggregate 20 mm down gauge) 75 mm in bed alround CI soil and waste pipe

100 mm and 75 mm dia under floor including shuttering and centering

Providing and fixing CP brass floor clean out plug complete with fixing of 100mm dia CI socket in CI pipe bend with lead cauled joints as per standard design.

Providing, fixing and testing cast iron pipes (class 'LA') conforming to IS:1536 complete with fittings such as elbows, tees, bends, crosses, cleanouts, etc., lead caulked joints, steel supports as required/directed at site including cutting and making good the walls, floors, RCC work, etc., cutting chases and filling the same with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or cement mortar 1:4 (1 cement : 4 coarse sand) as required (cost of structural steel supports shall be paid separately).

BOQ-8




2.10 20 Kg. 50 1000.00

455200.00

3.0 WATER SUPPLY

3.1

a) 15mm dia 160 Metre 250 40000.00

b) 20mm dia 140 Metre 450 63000.00

c) 25mm dia 90 Metre 550 49500.00

d) 32mm dia 50 Metre 800 40000.00

e) 40mm dia 25 Metre 1000 25000.00

f) 50 mm nominal bore. 50 m 280 14000.00

g) 65 mm nominal bore. 40 m 380 15200.00

Providing and fixing to the basement ceiling M S clamps/supports fabricated form M S structural steel consisting of channels, angle iron, M S rods, nuts, bolts and washers, fixed to the basement ceiling with expansion fasterners including painting of supports with an enamel paint over a coat of primer complete in all respects. (Sample of structural clamp to be submitted for approval before installation).

Total of Soil, Waste & Vent Pipe and Fittings carried over to Summary

Providing, fixing and testing G.I. pipes (medium class) of an approved make conforming to IS:1239 complete with malleable cast iron fittings as per IS:1879 such as tees, crosses, plugs, sockets, elbows, reducers, unions, sleeve pieces, check nuts etc. clamps/structural steel supports as required/directed at site including cutting and making good the walls, floors, RCC work etc. cutting chases and filling the same with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or cement mortar 1:4 (1 cement : 4 coarse sand) as required.

BOQ-9




3.2

a) 20 mm dia 41 m 195 7995.00a) 40 mm dia 30 m 195 5850.00b) 50 mm dia 290 m 250 72500.00

3.3

a) 20mm nominal bore 20 Nos. 250 5000.00

b) 32 mm nominal bore 7 Nos. 775 5425.00

c) 40 mm nominal bore 2 Nos. 550 1100.00

d) 50 mm nominal bore 5 Nos. 1500 7500.00

e) 65 mm nominal bore 1 Nos. 3000 3000.00

3.4

a) With F.P.S. bricks 13 Nos. 430 5590.00

Providing and laying GI pipes (medium class) of approved make, conforming to IS : 1239 complete with malleable cast iron fittings as per IS : 1879 such as tees, crosses, plugs, sockets, elbows, reducers, unions, sleeves pieces, check nuts etc. necessary excavation and back filling etc. all complete. (pipes burried in ground).

Providing and fixing lever operated gun metal ball valve with SS ball.

Constructing masonry chamber 30x30x50 cm inside with 75 class designation brick work in cement mortar 1:5 (1 cement: 5 fine sand) for gate valve complete with C.I. hinged cover with frame of size 300 x 300mm (total wt. 7 kg.) fixed in cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 mix (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size), and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement, complete as per specifications.

BOQ-10




3.5 1 Nos. 5000 5000.00

3.6 Providing and fixing ball valves with plastic float.

a) 40 mm nominal bore 2 Nos. 1060 2120.00

3.7

a) 20 mm dia 41 m 195 7995.00

b) 40 mm dia 30 m 195 5850.00

c) 50 mm dia 290 m 250 72500.00

3.8

a) 50 mm nominal bore 50 m 16 800.00

3.9

a) 40 mm nominal bore pipe 1 Nos. 2500 2500.00

3.10 8 Nos. 2580 20640.00

Making connection of G.I. distribution branch with GI/CI municipal water supply main 40 mm to 100 mm nominal bore by providing and fixing all required pipe fittings, including cutting & threading the pipes etc. complete in all respect. (All expenses for making this connection including taking approval from local authorities shall be borne by the contractor)

Providing and fixing sand of grading zone V or coarser grade alround the GI pipes in external work.

Painting G.I. pipes with two or more coats of synthetic enamel paint of approved quality and shade over a coat of red oxide primer as directed by the Engineer.

Providing and fixing water meter with gun metal fullway valve in G.I. pipeline including cutting and threading the pipe and making long screws etc. complete in all respects (fullway valve to be paid separately)

Providing and fixing medium duty circular manhole cover with frame size 500 mm dia, total weight 116 kg (58kg frame & 58 kg frame) complete in all respects.

BOQ-11




3.11

a) 40 mm dia 2 Nos. 95 190.00

b) 50 mm dia 2 Nos. 135 270.00

c) 100 mm dia 8 Nos. 405 3240.00

d) 150 mm dia 1 Nos. 740 740.00

3.12 40 Nos. 60 2400.00

3.13

a) 50 mm dia 2 Nos. 500 1000.00

3.14

a) 100 mm dia 10 Nos. 290 2900.00

488805.00

4.0 SANITARY FIXTURES

4.1

Providing and fixing 600mm long puddle flanges fabricated out of 6 mm thick M.S. plates along with flanges of suitable size properly fixed in walls & top slabs of underground and overhead tanks.

Providing and fixing PVC foot rests with 20X20mm sq bars (for underground water tanks).

Providing and fixing mosquito proof, over flow brass coupling of an approved design

Providing & fixing MS vent pipe complete with 2 Nos. bends & painting with enamel paint all complete.

Total of Water Supply carried over to Summary

Providing and fixing white glazed vitreous China European type water closet with seat and lid, C.P. brass hinges and rubber buffers, including cutting and making good the walls and floors where required.

BOQ-12




a) 30 Nos. 4000 120000.00

4.2

a) 30 Nos. 8000 240000.00

4.3

a) 30 Nos. 2260 67800.00

b) R.O. Nos.

4.4

a) 15 mm dia. 30 Nos. 500 15000.00

H.S.I. Wate closet No. 20027 or approved equivalent.

Providing and fixing white glazed vitreous china flat back lipped urinals H.S.I. CAT No. 60.002 or approved equivalent of size 590 x 375 x 390 mm C.I. hangers, with electronic solenoid valve operated auto flushing system comprising of stop cock, solenoid valve electronic control unit etc. complete with all electrical works required for completion of work complete with fittings concealed in chase, C.P. spreaders 32 mm C.P. brass domical waste, 32 mm C.P. cast brass bottle trap and pipe to wall with C.P. flange, C.P. brass screws and washers complete, including cutting and making good the walls and floors where required.

One urinal basin with electronic solenoid valve operated auto flushing system.

Providing and fixing white glazed vitreous china wash basins with C.P. pillar tap, C.P. brass waste 32mm C.P. bottle trap and unions, and sealing of joints between wash basins and counter slabs around the wash basins with Sillicone rubber cement of approved make of matching colour all complete including cutting and making good the walls and floors where required.

H.S.I. wash basin No. 10.016 (550x450mm) or approved equivalent make with CP pillar tap Jaquar Cat No. 021 or approved equivalent.

H.S.I. Was basin No. 10.007 (680 x 450mm ) or approved equivalent make with C.P. piller tap Jaquar Cat No. 021 or approved equivalent.

Providing and fixing C.P. brass bib taps long body Jaquar Cat No. 107 or approved equivalent including cutting and making good the walls wherever required.

BOQ-13




4.5

a) 600 x 20 mm size 30 Nos. 550 16500.00

4.6 30 Nos. 200 6000.00

4.7 30 Nos. 1000 30000.00

4.8 90 Nos. 547 49230.00

4.9 20 Nos. 550 11000.00

4.10 30 Nos. 550 16500.00

4.11 50 Nos. 200 10000.00

4.12 30 Nos. 600 18000.00

Providing and fixing C.P. brass towel rails Dripless Cat No. CL-903 or approved equivalent complete with C.P. brass brackets fixed to rawl plug of approved design with C.P. brass screws.

Providing and fixing C.P. brass twin robe hooks (Dripless Cat. No.CL-908 or approved equivalent).

Providing and fixing, ABS plastic body liquid soap dispenser with push lever assembly complete with soap refill- Kimberly - Clark make or approved equivalet.

Providing and fixing 15 mm C.P. brass angle valve (Jaquar Cat No. 053 and 803 or approved equivalent) with C.P. brass connection pipe with union nuts complete with C.P. brass flange including cutting and making good the walls where ever required.

Providing and fixing stainless steel soap dish (dripless Cat no.CL-938 or equivalent) including making good the walls wherever required.

Providing and fixing stainless toilet paper holder (Dripless Cat. No.-CL-936 or approved equivalent) fixed in position by means of C.P. screws and rawl plugs embedded in the walls complete including cutting and making good the walls wherever required.

Providing and fixing C.P. brass hinged grating, 6 mm thick with frame (Dripless Cat No. CL-918 or approved equivalent) including setting in floor with cement mortar 1:3.

Providing and fixing white glazed vitreous china division plates for urinals (H.S.I. Cat no. 61.001 or approved equivalent) of size 680 x 300 mm.

BOQ-14




4.13 20 Sqm. 2550 51000.00

4.14

a) No. touch operation.

b)

c) 10 Nos. 12000 120000.00

771030.00

5.0 RAIN WATER PIPES AND FITTINGS

5.1

a) 160 mm dia (O.D.) 300 m 970 291000.00

Providing and fixing wall to wall 6 mm copper backed float glass mirrors complete with 6 mm thick BWP type ply board, 40 mm stainless steel channel plugged to wall, with hard wood treated with two coats of wood preservative etc. all complete.

Providing and fixing hand drier (KOPAL make or approved equivalent) in rugged multiple stoved, multiple grounded steel enclosure with 1 bracket for firm wall fixture, 1 meter sheathed 3 core flexible cable with 3 pin 15A plug top along with lock and key and of shade approved by engineer incharge. The hand drier shall have the following features :

Solid state time delay to allow user to keep hands in comfortable position.

Suitable for operation on 230 V 50 Hz 15 A outlet AC supply.

Total of Sanitary Fixtures carried over to Summary

Providing, fixing and testing U.P.V.C. rain water pipes including all fittings such as bends, junctions, inspection doors, offsets, cowls, access pieces/plugs, floor cleanouts etc. clamps/ structural steel supports as required/directed at site, jointing with solvonied cement joints including cutting holes in walls and making good the same.

BOQ-15




5.2

a) 200 mm dia 13 Nos. 125 1625.00

292625.00

6.0 STORM WATER SYSTEM

6.1

a) 150mm dia R C C pipe 15 M 300.00 4500.00

b) 250mm dia R C C pipe 175 M 400.00 70000.00

c) 350mm dia R C C pipe 20 M 600.00 12000.00

6.2

a) With F P S bricks 21 Nos. 3000.00 63000.00

6.3

Providing and fixing cast iron gratings for Rain Water Pipes.

Total of Rain Water Pipes and Fittings carried over to Summary

Providing and laying non-pressure NP2 class (light duty) R.C.C pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.

Construction brick masonry road gully chamber 50 x 45 x 60 cm with bricks of class designation 75 in cement mortar 1:5 (1 cement : 5 fine sand) including 500 x 450mm precast R C C horizontal grating with frame complete as per standard design.

Excavating trenches of required width for pipes, cables, etc., including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil and then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed within a lead of 50m

BOQ-16




210 M 100.00 21000.00

6.4 2000 Kg. 50.00 100000.00

6.5

a) 20 RM 860.00 17200.00

287700.00

7.0 Pumping System

Pipes cables etc. exceeding 80mm dia but not exceeding 300mm dia

Providing and fixing 350x600mm size MS gratings fabricated form MS structural steel consisting of angle irons and MS flats including painting of gratings with black paint complete in all respects (Sample of grating to be submitted for approval of Engineer before installation).

Constructing brick masonary surface drain in cement mortar 1:4 (1 cement : 4 coarse sand) 50mm thick precast RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), earth excavation, foundation concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and 25mm thick avg. cement concrete floor 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per detail shown in drawing.

600mm wide and 450mm deep with F.P.S. bricks class designation 75.

Total of Storm Water System carried over to Summary

BOQ-17




7.1

a) Domestic Raw Water Pumps

i. Capacity 200 lpm, Head 40 m 2 Set 45,000.00 90000.00

7.2

a) Capacity 450 lpm and Head 15m 4 No. 90,000.00 360000.00

Notes:a)

7.3

a) For UGT & Draiange Sump 6 Set 50,000.00 300000.00

Providing, fixing and commissioning single stage mono block pumping set with C.I. volute and bronze impeller with mechanical seal connected to a totally enclosed fan cooled induction motor with class B insulation, mounted on a common structural base plate with 100mm dia pressure gauge with gunmetal isolation cock and piping, suitable vibration elimination pads of approved design for pump foundation. Motor to be suitable for 400/440 volts, 3 phase, 50 cycles, AC supply with rpm to suit corresponding pumps

Providing, fixing, testing and commissioning non clog type mono block submersible drainage pumps suitable for handling solids of 25 - 32mm size with totally water and dust proof motor as specified complete with control cable from pump to control panel inclusive of all terminations and earthing required, duck foot bend, stainless steel guide wire M S galvanised lifting chain and other required suspension devices all complete as per specification KSB make or approved equivalent.

Contractor should include the rate of all Electrical/Mechanical items as required to operate the system automatic/manual and pumps shall be protected against running dry including wiring, conduiting and all accessories complete as required.

Providing and fixing transistorised liquid level controllers/level indicators with low voltage relays and seamless steel probes and PVC shroud, including necessary wiring and conduiting from probes to display panel/motor control panels. (for underground tanks and drainage sumps).

BOQ-18




7.4

a) 50mm dia 6 No. 1,500.00 9000.00

7.5

50mm dia 6 No. 1,800.00 10800.00

7.6

a) 65mm dia 1 No. 3,000.00 3000.00

7.7

a)

i) 50mm dia 2 No. 5,000.00 10000.00

782800.00

8.0 FIRE FIGHTING WORKS

8.1

Providing and fixing lever operated gun metal ball valve with SS ball.

Providing and fixing gun metal horizontal non-return valve with screwed ends tested to 20 KG/cm2

Providing and fixing suction strainer with M S flanged connection 1000 mm long, fabricated from 16 gauge brass sheet with 3mm slots.

Providing and fixing reinforced Neoprene flexible pipe connectors with all accessories on all pumps delivery.

Suitable for 5 kg/cm2

Total of Pumping Systems carried over to Summary

Supplying, installing, testing & commissioning of electric driven Hydrant Pump suitable for automatic operation consisting of the following:

Horizontal split casing centrifugal suction type pump complete for delivery of 2850 ltrs./minute against a total head of 70 metres approximately complete with necessary arrangement for testing of pump. Machanical Seal shall also be included.

BOQ-19




2 Set 325000 650000.00

8.2

1 Set 550000 550000.00

8.3

Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pump with synchronous speed of 1450 RPM T.E.F.C. type such as confirming to IP:55 and flexible coupling and coupling guard with the pump.

Common bed plate of fabricated mild steel channel or cast iron type.

Suitable reinforced cement concrete pump foundation including cushy foot mounting, foundation bolts, washers as required.

Supplying, installing, testing & commissioning of Diesel Engine driven Standby Pump suitable for automatic operation consisting of the following (as per specification).

Horizontal split casing centrifugal suction type pump complete for delivery of 2850 ltrs./minute against a total head of 70 metres approximately complete with necessary arrangement for testing of pump). Mechanical Seal shall also be included.

Water coolled Diesel Engine developing suitable BHP at 1500 RPM for the Pump, flexible coupling and coupling guard with the Pump, common bed plate for mounting of engine and pump, RCC foundation and vibration damping arrangement by Cushy Foot and engine panel provided by engine manufacturer, connection to Engine Starting Panel as per item (4), sealed maintenance free batteries of 24 V, 88 AH. Rate shall include Exhaust pipe of required length with asbestos lagging, muffler, day oil tank of 400 lts with first charge and manual oil pump set.

Supplying, installing, testing & commissioning of electric driven automatic pressurisation pump set consisting of the following :

BOQ-20




1 Set 70000 70000.00

8.4

Details of requirements given in specs. 1 Set 200000 200000.00

8.5

a) 35 sq.mm x 3 core 20 m 175 3500.00

b) 10 sq.mm x 3 core 10 m 80 800.00

Horizontally mounted centrifugal end suction type Jockey pump complete for delivery of 180 ltrs/minute against a total head of 70 metres approx complete with arrangement for testing of the working of the pumping set as required. Rate shall also include Mechanical Seal.

Squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply of suitable rating for the above pum with synchronous speed of 2900 RPM T.E.F.C. type such as confirming to IPL55 and flexible coupling and coupling guard with the pump.

Common bed plate of fabricated mild steel channel or cast iron type.

Suitable cement concrete pump foundation with cushy foot, MS bolts, washers as required.

Providing, fabricating, erecting, testing and commissioning of cubical type floor mounted power cum control panel complete with suitable switch gear, bus bars, relays, contractors, indicating lamps, fuses, instruments automatic isolator & auxillary switch including connections complete as required for 1 No Hydrant Pump, 1 No sprinker pump and 1 No Jockey Pump, 1 No Engine Starting Panel for Diesel Pumpl.

Supplying and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V. Aluminium Conductor including supplying and making and termination with brass compression glands:

BOQ-21




8.6 4 Nos. 3000 12000.00

8.7

a) 80 mm dia 5 m 600 3000.00

b) 100 mm dia 5 m 750 3750.00

c) 150 mm dia 10 m 1200 12000.00

d) 200 mm dia with supports etc.as required. 15 m 1500 22500.00

8.8

8.9 1 Nos. 5000 5000.00

8.10 5 m 250 1250.00

8.11 30 m 40 1200.00

Supplying, testing, installation & commissioning of pressure switches for Hydrant, Standby and Jockey Pumps, including necessary wiring upto control panel & other materials.

Providing, fixing, jointing and testing of Heavy Guage (or 6mm th.) MS Pipe IS:1239 marked with accessories like tees, elbows, flanged joints, reducers, compressed asbestos gaskets, nuts and bolts including fixing the pipe with suitable flat iron strip clamps/bracket, painting etc. complete as required for delivery/suction manifold relating to the pumps including painting of two coats of Red Oxide including all civil breakages and making good the same.

Providing & installing cylindrical type an vessel, 450 mm dia 1.5 M high of thickness 6.0 mm M.S. complete with air release valve, safety valve, pressure gauge etc. as required.

Earthing with copper Earth plate 600 mm x 600 mm x 6 mm th.including accessories and providing masonry enclosure with MS cover plate having locking arrangement and watering pipe etc. as required with charcoal of coke and salt as per IS:3043.

Providing & fixing 25 mm x 3 mm G.I. Strip in 40 mm dia GI pipe from earth electrode as required as per IS:3043.

Providing & fixing 25 mm x 3 mm GI strip on surface or in recess for earth connection etc. as required.

BOQ-22




8.12 4 Sqm. 1000 4000.00

8.13 1 Nos. 10000 10000.00

8.14 30 m 80 2400.00

8.15 10 m 300 3000.00

8.16 270 m 900 243000.00

8.17 45 m 560 25200.00

8.18 20 Nos. 5000 100000.00

8.19 40 Nos. 4500 180000.00

Providing electric insulated rubber mat non-skid type with grooved top 90 cm wide and 12 mm th. As per IS:5424 suitable for 1000 volts.

Providing, fixing, testing and commissioning of Pump Repeator Panel complete with individual indication for each Pump with LED and Piezo Sounder and Acknowledge facility.

Providing and laying 2 x 2.5 sq mm copper conductor PVC sheathed armoured cable for connecting Panel to Pump Repeater Panel.

Providing and laying 200 mm wide cable trays fabricated from perforated hot dip MS sheets of 2 mm thickness, complete with hangers, wall supports, including painting and continuous earthing to full length as required.

150 mm dia MS Pipes complete with painting, wrapping and coating of the pipes as per IS:10211 in all kinds of soil at a depth 1.5 m including excavation and refilling the trench all complete.

80 mm dia MS Pipes complete with painting, wrapping and coating of the pipes as per IS:10211 in all kinds of soil at a depth 1.5 m including excavation and refilling the trench all complete.

Providing and fixing gunmetal single headed hydrant valves with flanged inlet 63 mm female instantaneous outlet of gun metal complete with blank cap and chain IS:5290 marked.

Providing 63 mm dia 15 m long fungus resistant reinforced rubber lined hose pipe marked to IS:636 Type A with Gun Metal male & female coupling wire wound with the pipe.

BOQ-23




8.20 20 Nos. 2000 40000.00

8.21 12 Nos. 9000 108000.00

8.22 8 Nos. 5000 40000.00

8.23

a) 150 mm dia 17 Nos. 6000 102000.00

b) 100 mm dia 10 Nos. 4500 45000.00

c) 80 mm dia 3 Nos. 3000 9000.00

8.24

a) 150 mm dia 3 Nos. 15000 45000.00

b) 80 mm dia 1 Nos. 4200 4200.00

Providing gun metal hand control fog nozzle Branch Pipe as per IS Code complete with fixing clips.

Providing and fixing first aid hose reel full swinging type including cabinet with 30 m length x 20 mm dia rubber lined pipe with ABS plastic shut off nozzle of 6 mm dia. The hose reel shall conform to IS requirements. Rate shall include 25 mm dia pipe connection from riser to hose reel including flexible pipe, sockets, nipples, elbows and 25 mm ball valve.

Providing and fixing weather proof standard hose cabinet (1.0 x0.45x0.6) outdoor type made of not less than 3 mm aluminium sheet having central opening glazed door including necessary locking arrangement, painting (one coat primer & two coats of paint) for accomodatating external hydrant valves. (The cabinet shall be prepared as per drawing). The words "Hose Cabinet" to be painted on the Box.

Providing and fixing butterfly valve of cast body with SS disc and SS stem, teflon bushing and niterite 'O' rings

Providing and fixing cast iron, double flange type non-return valve with swinging type gunmetal gate valve complete with bolts, nuts, washers and rubber gaskets conforming to IS:5312 (ISI marked).

BOQ-24




8.25 12 Nos. 2000 24000.00

8.26 1 Set 5000 5000.00

8.27 1 No. 6000 6000.00

8.28 2 Nos. 4000 8000.00

8.29 2 Nos. 8000 16000.00

8.30 12 Sqm 3500 42000.00

8.31 24 Nos. 3500 84000.00

Providing and making drainage provision for the risers with necessary 40 mm dia pipe, ball valve etc as required. Maximum length of pipe shall be 6 M.

Providing and fixing suction coupling for fire brigade drawl of water from tank with 150 mm dia GI (Medium) pipe and foot valve (Pipe max 8 M long)

Providing and fixing gun metal four way connection for Tank filling (Siamese connection)

Providing and making 1.0 M x 1.0 M x 1.0 M (internal size) valve chamber of 230 mm th. Wall on 100 mm th. PCC base with internal plastering. Manhole shall have a 116 kg CI Cover with stone.

Providing and fixing air release valve with 250 dia air vessels at the top of Risers.

Providing and fixing Internal Fire Hose Cabinet Shutters consisting frame and shutter frame, complete with 5 mm thick Clear glass, handles, key box, painting complete as required. Shutter shall open 180 degrees.

Providing and fixing ABC type fire extinguishers ISI marked complete with brackets and bolts 9 kg capacity

BOQ-25




8.32

a) 150 mm dia 204 m 750 153000.00

b) 50 mm dia 70 m 274 19180.00

c) 40 mm dia 184 m 196 36064.00

d) 32 mm dia 567 m 188 106596.00

e) 25 mm dia 468 m 155 72540.00

8.33

a) 150 mm dia Sluice Valve

b) Alarm Valve with Water Motor Gong

Pressure gauge and other miscellaneous 1 Set 40000 40000.00

Valves and fittings as required.

8.34 2 Nos. 1000 2000.00

8.35

a) 470 Nos. 350 164500.00

Providing and laying MS (M) Pipe IS:1239 marked including all forged fittings and accessories such as screwed/welded flanges, tees, reducers etc. complete including painting, welding, jointing and neoprene gaskets, nuts, bolts etc. as required of the following pipes painted with one coat of primer & two coats of post office red enamel paint fixed in ceiling, walls, coloumns for all heights with hangers, supports and fasteners all as per drawing including chasing of walls/columns/ceilings etc. and making good the same complete as required (for Sprinkler System).

Providing testing and commissioning of Installation Control Valve inclusive of :

Providing and fixing Pressure Gauges on Sprinkler Headers including ball valve and pipe stem complete as required.

Providing, fixing, testing & commissioning of sprinkler heads of the following type :

Pendant type with quartzond bulb operating temperature at 79 deg. C as per specification.

BOQ-26




3274680.00Total of fire fighting system carried over to summary

BOQ-50



SUMMARY

SL.NO. DESCRIPTION Amount (Rs.)

1.0 SEWERAGE 206,500.00

2.0 SOIL,WASTE & VENT PIPE AND FITTINGS 455,200.00

3.0 WATER SUPPLY 488,805.00

4.0 SANITARY FIXTURES 771,030.00

5.0 RAIN WATER PIPES AND FITTINGS 292,625.00

6.0 STORM WATER SYSTEM 287,700.00

7.0 PUMPING SYSTEMS 782,800.00

8.0 FIRE FIGHTING SYSTEMS 3,274,680.00

TOTAL 6,559,340.00

(Rupees Sixty Five Lakhs Fifty Nine Thousand Three Hundred Forty- only)

BOQ-50


Documents

· XLS file · Web view · 2008-05-12Summary Sheet BOQ INDEX Providing and making drainage provision for the risers with necessary 40 mm dia pipe, ball valve etc as required. Maximum