xE910 Updated FormFactor Pin Out - Telit · discharges may damage the product itself. Same cautions have to be taken for the SIM, checking carefully the instruction for its use. Do

[04.

2016

]

xE910 Updated Form Factor Pin Out

Rev. 21 – 2016-11-21

xE910 Updated FormFactor Pin Out

80502NT11427A REV. 2.1 ................................................................................... PAGE 2 OF 27 2016-11-21

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

NOTICE

While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Telit does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others.

It is possible that this publication may contain references to, or information about Telit products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Telit intends to announce such Telit products, programming, or services in your country.

Copyrights

This instruction manual and the Telit products described in this instruction manual may be, include or describe copyrighted Telit material, such as computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Telit and its licensors contained herein or in the Telit products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit, as arises by operation of law in the sale of a product.

Computer Software Copyrights

The Telit and 3rd Party supplied Software (SW) products described in this instruction manual may include copyrighted Telit and other 3rd Party supplied computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW computer programs contained in the Telit products described in this instruction manual may not be copied (reverse engineered) or reproduced in any manner without the express written permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit or other 3rd Party supplied SW, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product.


80502NT11427A REV. 2.1 ................................................................................... PAGE 3 OF 27 2016-11-21

Usage and Disclosure Restrictions

I. LICENSE AGREEMENTS

The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement.

II. COPYRIGHTED MATERIALS

Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Telit

III. HIGH RISK MATERIALS

Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities.

IV. TRADEMARKS

TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service names are the property of their respective owners.

V. THIRD PARTY RIGHTS

The software may include Third Party Right software. In this case you agree to comply with all terms and conditions imposed on you in respect of such separate software. In addition to Third Party Terms, the disclaimer of warranty and limitation of liability provisions in this License shall apply to the Third Party Right software.

TELIT HEREBY DISCLAIMS ANY AND ALL WARRANTIES EXPRESS OR IMPLIED FROM ANY THIRD PARTIES REGARDING ANY SEPARATE FILES, ANY THIRD PARTY MATERIALS INCLUDED IN THE SOFTWARE, ANY THIRD PARTY MATERIALS FROM WHICH THE SOFTWARE IS DERIVED (COLLECTIVELY “OTHER CODE”), AND THE USE OF ANY OR ALL THE OTHER CODE IN CONNECTION WITH THE SOFTWARE, INCLUDING (WITHOUT LIMITATION) ANY WARRANTIES OF SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR PURPOSE.

NO THIRD PARTY LICENSORS OF OTHER CODE SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND WHETHER MADE UNDER CONTRACT, TORT OR OTHER LEGAL THEORY, ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE OTHER CODE OR THE EXERCISE OF ANY RIGHTS GRANTED UNDER EITHER OR BOTH THIS LICENSE AND THE LEGAL TERMS APPLICABLE TO ANY SEPARATE FILES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.


80502NT11427A REV. 2.1 ................................................................................... PAGE 4 OF 27 2016-11-21

APPLICABILITY TABLE

PRODUCTS

LE910CX SERIES

UE910 SERIES

HE910 SERIES

CE910-DUAL

CE910-SC

DE910-DUAL

DE910-SC

LE910 SERIES

LE920 AUTO SERIES

LE910 V2 SERIES

LE910 CAT.1 SERIES

GE910-QUAD

GE910-GNSS

GE910-QUAD AUTO

GE910-QUAD V3

GL865-DUAL


80502NT11427A REV. 2.1 ................................................................................... PAGE 5 OF 27 2016-11-21

Contents

I. LICENSE AGREEMENTS ............................................................ 3

II. COPYRIGHTED MATERIALS ...................................................... 3

III. HIGH RISK MATERIALS ............................................................. 3

IV. TRADEMARKS ............................................................................ 3

V. THIRD PARTY RIGHTS ............................................................... 3

1. INTRODUCTION .......................................................................... 6

Contact Information, Support ........................................................ 6

Text Conventions .......................................................................... 7

Related Documents ...................................................................... 8

2. SAFETY RECOMMENDATIONS.................................................. 9

READ CAREFULLY ...................................................................... 9

3. ACRONYMS ............................................................................... 10

4. SCOPE AND OVERVIEW .......................................................... 11

5. PIN DESCRIPTION .................................................................... 12

6. PIN MAP..................................................................................... 21

7. LAYOUT DIMENSION ................................................................ 23

8. CURRENT XE910 VS UPDATED XE910 LAYOUT COMPARISON (TOP VIEW) 25

9. DOCUMENT HISTORY .............................................................. 26


80502NT11427A REV. 2.1 ................................................................................... PAGE 6 OF 27 2016-11-21

1. INTRODUCTION The information presented in this document is believed to be accurate and reliable. However, no responsibility is assumed by Telit Communications S.p.A. for its use, nor any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent rights of Telit Communications S.p.A. other than for circuitry embodied in Telit products. This document is subject to change without notice.

Contact Information, Support For general contact, technical support services, technical questions and report documentation errors contact Telit Technical Support at:

• [email protected] • [email protected] • [email protected] • [email protected]

Alternatively, use: http://www.telit.com/support

For detailed information about where you can buy the Telit modules or for recommendations on accessories and components visit: http://www.telit.com

Our aim is to make this guide as helpful as possible. Keep us informed of your comments and suggestions for improvements.

Telit appreciates feedback from the users of our information.

mailto:[email protected]



http://www.telit.com/support

http://www.telit.com/


80502NT11427A REV. 2.1 ................................................................................... PAGE 7 OF 27 2016-11-21

Text Conventions

Danger – This information MUST be followed or catastrophic equipment failure or bodily injury may occur.

Caution or Warning – Alerts the user to important points about integrating the module, if these points are not followed, the module and end user equipment may fail or malfunction.

Tip or Information – Provides advice and suggestions that may be useful when integrating the module.

All dates are in ISO 8601 format, i.e. YYYY-MM-DD.


80502NT11427A REV. 2.1 ................................................................................... PAGE 8 OF 27 2016-11-21

Related Documents • 1VV0301298_LE910Cx_Hardware_User_Guide_r0_31


80502NT11427A REV. 2.1 ................................................................................... PAGE 9 OF 27 2016-11-21

2. SAFETY RECOMMENDATIONS READ CAREFULLY

Be sure the use of this product is allowed in the country and in the environment required. The use of this product may be dangerous and has to be avoided in the following areas:

• Where it can interfere with other electronic devices in environments such as hospitals, airports, aircrafts, etc.

• Where there is risk of explosion such as gasoline stations, oil refineries, etc. It is the responsibility of the user to enforce the country regulation and the specific environment regulation.

Do not disassemble the product; any mark of tampering will compromise the warranty validity. We recommend following the instructions of the hardware user guides for correct wiring of the product. The product has to be supplied with a stabilized voltage source and the wiring has to be conformed to the security and fire prevention regulations. The product has to be handled with care, avoiding any contact with the pins because electrostatic discharges may damage the product itself. Same cautions have to be taken for the SIM, checking carefully the instruction for its use. Do not insert or remove the SIM when the product is in power saving mode.

The system integrator is responsible for the functioning of the final product; therefore, care has to be taken to the external components of the module, as well as any project or installation issue, because the risk of disturbing the GSM network or external devices or having impact on the security. Should there be any doubt, please refer to the technical documentation and the regulations in force. Every module has to be equipped with a proper antenna with specific characteristics. The antenna has to be installed with care in order to avoid any interference with other electronic devices and has to guarantee a minimum distance from the body (20 cm). In case this requirement cannot be satisfied, the system integrator has to assess the final product against the SAR regulation.

The European Community provides some Directives for the electronic equipment introduced on the market. All of the relevant information is available on the European Community website:

http://ec.europa.eu/enterprise/sectors/rtte/documents/

The text of the Directive 99/05 regarding telecommunication equipment is available,

while the applicable Directives (Low Voltage and EMC) are available at:

http://ec.europa.eu/enterprise/sectors/electrical/

http://ec.europa.eu/enterprise/sectors/rtte/documents/

http://ec.europa.eu/enterprise/sectors/electrical/


80502NT11427A REV. 2.1 ................................................................................. PAGE 10 OF 27 2016-11-21

3. ACRONYMS

TTSC TELIT TECHNICAL SUPPORT CENTRE USB UNIVERSAL SERIAL BUS HS HIGH SPEED DTE DATA TERMINAL EQUIPMENT UMTS UNIVERSAL MOBILE TELECOMMUNICATION SYSTEM WCDMA WIDEBAND CODE DIVISION MULTIPLE ACCESS HSDPA HIGH SPEED DOWNLINK PACKET ACCESS HSUPA HIGH SPEED UPLINK PACKET ACCESS UART UNIVERSAL ASYNCHRONOUS RECEIVER

TRANSMITTER HSIC HIGH SPEED INTER CHIP SIM SUBSCRIBER IDENTIFICATION MODULE SPI SERIAL PERIPHERAL INTERFACE ADC ANALOG – DIGITAL CONVERTER DAC DIGITAL – ANALOG CONVERTER I/O INPUT OUTPUT GPIO GENERAL PURPOSE INPUT OUTPUT CMOS COMPLEMENTARY METAL – OXIDE

SEMICONDUCTOR MOSI MASTER OUTPUT – SLAVE INPUT MISO MASTER INPUT – SLAVE OUTPUT CLK CLOCK MRDY MASTER READY SRDY SLAVE READY CS CHIP SELECT RTC REAL TIME CLOCK PCB PRINTED CIRCUIT BOARD ESR EQUIVALENT SERIES RESISTANCE VSWR VOLTAGE STANDING WAVE RADIO VNA VECTOR NETWORK ANALYZER


80502NT11427A REV. 2.1 ................................................................................. PAGE 11 OF 27 2016-11-21

4. SCOPE AND OVERVIEW The aim of this document is the description of new xE910 pin assignments and the comparison with the conventional xE910 family product.

This document describes the form-fit of the family.

Each product will have its own datasheet in which the supported functionality specific to each module will be noted.

Not all functions are supported in the all products.

The product specific datasheet should always be considered as the most accurate and up to date specification


80502NT11427A REV. 2.1 ................................................................................. PAGE 12 OF 27 2016-11-21

5. PIN DESCRIPTION The table below provides a comparison between the current ball map and the updated ball map

xE910 FF Pin OUT (New) xE910 FF Pin OUT (Current)

PAD Signal I/O Description PAD Signal I/O Description

USB 2.0 Interface USB 2.0 Interface

A13 USB_VBUS AI Power for the internal USB transceiver. A13 USB_VBUS AI Power for the internal USB transceiver.

A14 USB_ID AI USB_ID, USB OTG use A14 USB_ID AI USB_ID, USB OTG use

B15 USB_D+ I/O USB differential Data (+) B15 USB_D+ I/O USB differential Data (+)

C15 USB_D- I/O USB differential Data (-) C15 USB_D- I/O USB differential Data (-)

USB 3 Interface

D8 USB_SS_TX_P O USB 3.0/3.1 Super Speed TX Data (+) N/A N/A

D9 USB_SS_TX_N O USB 3.0/3.1 Super Speed TX Data (-) N/A N/A

D10 USB_SS_RX_P I USB 3.0/3.1 Super Speed RX Data (+) N/A N/A

D11 USB_SS_RX_N I USB 3.0/3.1 Super Speed RX Data (-) N/A N/A

Asynchronous UART - Prog. / Data + HW Flow Control Asynchronous UART - Prog. / Data + HW Flow Control

N15 C103/TXD I Serial data input (TXD) from DTE N15 C103/TXD I Serial data input (TXD) from DTE

M15 C104/RXD O Serial data output (RXD) to DTE M15 C104/RXD O Serial data output (RXD) to DTE

L14 C105/RTS I Input for Request to Send (RTS) from DTE L14 C105/RTS I Input for Request to Send (RTS) from DTE

P15 C106/CTS O Output for Clear to Send (CTS) to DTE P15 C106/CTS O Output for Clear to Send (CTS) to DTE

P14 C107/DSR O Output for Data Set Ready (DSR) to DTE P14 C107/DSR O Output for Data Set Ready (DSR) to DTE

M14 C108/DTR I Input for Data Terminal Ready (DTR) from DTE M14 C108/DTR I Input for Data Terminal Ready (DTR) from

DTE

N14 C109/DCD O Output for Data Carrier Detect (DCD) to DTE N14 C109/DCD O Output for Data Carrier Detect (DCD) to

DTE

R14 C125/RING O Output for Ring Indication (RI) to DTE R14 C125/RING O Output for Ring Indication (RI) to DTE


80502NT11427A REV. 2.1 ................................................................................. PAGE 13 OF 27 2016-11-21

Asynchronous Auxiliary UART (Dedicated Location) Asynchronous Auxiliary UART (Dedicated Location)

K4 TX_AUX O Auxiliary UART (Debug) N/A N/A

L4 RX_AUX I Auxiliary UART (Debug) N/A N/A

SIM card interface 1 SIM card interface 1

A3 SIMVCC1 - External SIM signal 1 – Power supply for the SIM A3 SIMVCC1 - External SIM signal 1 – Power supply for

the SIM

A6 SIMCLK1 O External SIM signal 1 – Clock A6 SIMCLK1 O External SIM signal 1 – Clock

A4 SIMIN1 I External SIM signal 1 – Card detect (Active low) A4 SIMIN1 I External SIM signal 1 – Card detect (Active

low)

A5 SIMIO1 I/O External SIM signal 1 – Data I/O A5 SIMIO1 I/O External SIM signal 1 – Data I/O

A7 SIMRST1 O External SIM signal 1 – Reset A7 SIMRST1 O External SIM signal 1 – Reset

Analog Audio Analog Audio

B2 EAR1_MT+ AO Handset ear signal output, phase + B2 EAR1_MT+ AO Handset ear signal output, phase +

B3 EAR1_MT- AO Handset ear signal output, phase - B3 EAR1_MT- AO Handset ear signal output, phase -

B4 MIC1_MT+ AI Handset microphone signal input; phase+ B4 MIC1_MT+ AI Handset microphone signal input; phase+

B5 MIC1_MT- AI Handset microphone signal input; phase- B5 MIC1_MT- AI Handset microphone signal input; phase-

Digital Voice Interface (DVI) Digital Voice Interface (DVI)

B6 DVI_RX I PCM data input B6 DVI_RX I PCM data input

B8 DVI_CLK I/O PCM clock B8 DVI_CLK I/O PCM clock

B7 DVI_TX O PCM data output B7 DVI_TX O PCM data output

B9 DVI_WAO I/O PCM sync B9 DVI_WAO I/O PCM sync

B12 REF_CLK O Codec Reference Clock B12 REF_CLK O Codec Reference Clock


80502NT11427A REV. 2.1 ................................................................................. PAGE 14 OF 27 2016-11-21

SPI (Master/Slave) SPI (Master/Slave)

D15 SPI_MOSI/ AUX_TX_ TGPIO11 I/O SPI Master output Slave

Input / AUX UART TX D15 SPI_MOSI/ AUX_TX_ TGPIO11 I/O SPI Master output Slave Input / AUX

UART TX

E15 SPI_MISO/AUX_RX_TGPIO12 I/O SPI Master input Slave

output / / AUX UART TX E15 SPI_MISO/AUX_RX_TGPIO12 I/O SPI Master input Slave output / / AUX

UART TX

H14 SPI_CS_TGPIO13 I/O SPI chip select H14 SPI_CS_TGPIO13 I/O SPI chip select

F15 SPI_CLK_TGPIO14 I/O SPI clock F15 SPI_CLK_TGPIO14 I/O SPI clock

H15 SPI_MRDY I/O SPI Master Ready (Not supported by Qualcomm)

H15 SPI_MRDY I/O SPI Master Ready (Not supported by Qualcomm)

J15 SPI_SRDY I/O SPI Slave Ready (Not supported by Qualcomm)

J15 SPI_SRDY I/O SPI Slave Ready (Not supported by Qualcomm)

I2C Interface I2C Interface

B11 I2C_SCL_TGPIO15 I/O I2C clock B11 I2C_SCL_TGPIO15 I/O I2C clock

B10 I2C_SDA_TGPIO16 I/O I2C Data B10 I2C_SDA_TGPIO16 I/O I2C Data

DIGITAL IO DIGITAL IO

C8 TGPIO_01 I/O GPIO_01 C8 TGPIO_01 I/O GPIO_01




B14 TGPIO_05 I/O GPIO_05 B14 TGPIO_05 I/O GPIO_05



K15 TGPIO_08 I/O GPIO_08 K15 TGPIO_08 I/O GPIO_08

L15 TGPIO_09 I/O GPIO_09 L15 TGPIO_09 I/O GPIO_09

G15 TGPIO_10 I/O GPIO_10 / MMC_PWR_EN G15 TGPIO_10 I/O GPIO_10 / MMC_PWR_EN

M7 TGPIO_20 I/O GPIO_20 / FASTBOOT N/A N/A


80502NT11427A REV. 2.1 ................................................................................. PAGE 15 OF 27 2016-11-21

WIFI SDIO Interface WIFI SDIO Interface

L12 WIFI_SDRST_TGPIO17 I/O Wi-Fi reset L12 WIFI_SDRST_TGPIO17 I/O Wi-Fi reset

L13 WIFI_SDCLK_TGPIO18 I/O Wi-Fi CLK L13 WIFI_SDCLK_TGPIO18 I/O Wi-Fi CLK

N13 WIFI_SDCMD_TGPIO19 I/O Wi-Fi CMD N13 WIFI_SDCMD_TGPIO19 I/O Wi-Fi CMD

J13 WIFI_SD0_TGPIO20 I/O Wi-Fi SD0 J13 WIFI_SD0_TGPIO20 I/O Wi-Fi SD0

M13 WIFI_SD1_TGPIO21 I/O Wi-Fi SD1 M13 WIFI_SD1_TGPIO21 I/O Wi-Fi SD1

K13 WIFI_SD2_TGPIO22 I/O Wi-Fi SD2 K13 WIFI_SD2_TGPIO22 I/O Wi-Fi SD2

H13 WIFI_SD3_TGPIO23 I/O Wi-Fi SD3 H13 WIFI_SD3_TGPIO23 I/O Wi-Fi SD3

M11 WLAN_SLEEP_CLK O WiFi Sleep Clock M11 WLAN_SLEEP_CLK O WiFi Sleep Clock

M8 WCI_TXD_TGPIO24 DO Wireless coexistence interface TXD (From LTE modem)

N/A N/A

M9 WCI_RXD_TGPIO25 DI Wireless coexistence interface RXD (To LTE modem)

N/A N/A

SD/MMC Card Interface SD/MMC Card Interface

F13 VCC_MMC - Power supply out for MMC card F13 VCC_MMC - Power supply out for MMC card

G13 MMC_CD I MMC card detect(active low) G13 MMC_CD I MMC card detect(active low)

G12 MMC_DAT0 I/O MMC card data 0 N/A N/A

H12 MMC_DAT1 I/O MMC card data 1 N/A N/A

J12 MMC_DAT2 I/O MMC card data 2 N/A N/A

K12 MMC_DAT3 O MMC card data3 N/A N/A

E12 MMC_CLK O MMC card clock N/A N/A

F12 MMC_CMD I/O MMC card command N/A N/A


80502NT11427A REV. 2.1 ................................................................................. PAGE 16 OF 27 2016-11-21

RF SECTION RF SECTION

F1 ANT_DIV I RF antenna diversity1 F1 ANT_DIV I RF antenna diversity1

K1 ANT I/O Main Cellular RF antenna K1 ANT I/O Main Cellular RF antenna

R4 ANT_2 I/O Antenna for future use N/A N/A

GPS SECTION GPS SECTION

R9 ANT_GPS I GPS antenna R9 ANT_GPS I GPS antenna

R7 GPS_LNA_EN O Enable the external regulator for GPS LNA R7 GPS_LNA_EN O Enable the external regulator for GPS LNA

P7 GPS_PPS O GPS_PPS P7 GPS_PPS O GPS_PPS

N9 GPS_SYNC O GPS_SYNC N9 GPS_SYNC O GPS_SYNC

Miscellaneous Functions Miscellaneous Functions

D12 HW_KEY O Reference 1 kΩ resistor for production D12 HW_KEY O Reference 1 kΩ resistor for production

C14 VRTC AI VRTC Backup capacitor C14 VRTC AI VRTC Backup capacitor

P11 RESET_BB I Reset input to baseband controller P11 RESET_BB I Reset input to baseband controller

M5 S/W_RDY O Ready for AT command input N/A N/A

R13 SNDN I Emergency power off R13 SNDN I Emergency power off

R12 ON_OFF* I Power ON/OFF R12 ON_OFF* I Power ON/OFF

J4 STAT_LED O Status indicator LED N/A N/A

E13 VIO_1.8_REF AO 1.8V IO domain Reference E13 VIO_1.8_REF AO 1.8V IO domain Reference

R11 VAUX/PWRMON O Auxiliary Power output for external accessories/Power on monitor

R11 VAUX/PWRMON O Auxiliary Power output for external accessories/Power on monitor

M10 RFCLK2_QCA O Low noise RF clock output 2 N/A N/A

SIM 2 Interface SIM 2 Interface

D2 SIMVCC2 - External SIM signal 2 – Power supply for the SIM D2 SIMVCC2 - External SIM signal 2 – Power supply for

the SIM

C1 SIMCLK2 O External SIM signal 2 – Clock C1 SIMCLK2 O External SIM signal 2 – Clock

G4 SIMIN2 I External SIM signal 2 – Card detect (Active low) N/A N/A

C2 SIMIO2 I/O External SIM signal 2 – Data I/O C2 SIMIO2 I/O External SIM signal 2 – Data I/O


80502NT11427A REV. 2.1 ................................................................................. PAGE 17 OF 27 2016-11-21

D1 SIMRST2 O External SIM signal 2 – Reset D1 SIMRST2 O External SIM signal 2 – Reset

ADC Ports ADC Ports

B1 ADC_IN1 AI Analog to Digital converter 1 B1 ADC_IN1 AI Analog to Digital converter 1

H4 ADC_IN2 AI Analog to Digital converter 2 N/A N/A

D7 ADC_IN3 AI Analog to Digital converter 3 N/A N/A

HSIC interface HSIC interface

A12 HSIC_DATA I/O High-speed inter-chip interface - data A12 HSIC_DATA I/O High-speed inter-chip interface - data

A11 HSIC_STB I/O High-speed inter-chip interface - strobe A11 HSIC_STB I/O High-speed inter-chip interface - strobe

E4 SGMII_RX_P AI SGMII Receive Positive N/A N/A

F4 SGMII_RX_M AI SGMII Receive Negative N/A N/A

D5 SGMII_TX_P AO SGMII Transmit Positive N/A N/A

D6 SGMII_TX_M AO SGMII Transmit Negative N/A N/A

JTAG JTAG

C6 JTAG_TDI I JTAG C6 JTAG_TDI I JTAG

C3 JTAG_RESET I JTAG C3 JTAG_RESET I JTAG

D3 JTAG_TCK I JTAG D3 JTAG_TCK I JTAG

C4 JTAG_TRST* I JTAG C4 JTAG_TRST* I JTAG

E3 JTAG_TDO O JTAG E3 JTAG_TDO O JTAG

C5 JTAG_TMS I JTAG C5 JTAG_TMS I JTAG

G3 JTAG_PS_HOLD I Power supply hold signal G3 JTAG_PS_HOLD I Power supply hold signal

Power Supply Power Supply

M1 VBATT - Main power supply for Baseband M1 VBATT - Main power supply for Baseband

M2 VBATT - Main power supply for Baseband M2 VBATT - Main power supply for Baseband

N1 VBATT_PA - Main power supply for PA N1 VBATT_PA - Main power supply for PA

N2 VBATT_PA - Main power supply for PA N2 VBATT_PA - Main power supply for PA

P1 VBATT_PA - Main power supply for PA P1 VBATT_PA - Main power supply for PA

P2 VBATT_PA - Main power supply for PA P2 VBATT_PA - Main power supply for PA


80502NT11427A REV. 2.1 ................................................................................. PAGE 18 OF 27 2016-11-21

GND GND

A2 GND - A2 GND -

B13 GND - B13 GND -

D4 GND - D4 GND -

E1 GND - E1 GND -

E2 GND - E2 GND -

E14 GND - E14 GND -

F2 GND - F2 GND -

G1 GND - G1 GND -

G2 GND - G2 GND -

H1 GND - H1 GND -

H2 GND - H2 GND -

J1 GND - J1 GND -

J2 GND - J2 GND -

K2 GND - K2 GND -

L1 GND - L1 GND -

L2 GND - L2 GND -

M3 GND - M3 GND -

M4 GND - M4 GND -

M12 GND - M12 GND -

N3 GND - N3 GND -

N4 GND - N4 GND -

N5 GND - N5 GND -

N6 GND - N6 GND -

P3 GND - P3 GND -

P4 GND - P4 GND -

P5 GND - P5 GND -

P6 GND - P6 GND -

P8 GND - P8 GND -

P9 GND - P9 GND -


80502NT11427A REV. 2.1 ................................................................................. PAGE 19 OF 27 2016-11-21

P10 GND - P10 GND -

P13 GND - P13 GND -

R2 GND - R2 GND -

R3 GND - R3 GND -

R4 ANT_2 I/O ANT_2 R4 GND -

R5 GND - R5 GND -

R6 GND - R6 GND -

R8 GND - R8 GND -

R10 GND - R10 GND -

GND middle pads GND middle pads

G7 GND - N/A N/A -

G8 GND - N/A N/A

G9 GND - N/A N/A

H7 GND - N/A N/A

H8 GND - N/A N/A

H9 GND - N/A N/A

J7 GND - N/A N/A

J8 GND - N/A N/A

J9 GND - N/A N/A

RFU RFU

A8 RFU - Was USB SIM A8 RFU - Was USB SIM

A9 RFU - Was USB SIM A9 RFU - Was USB SIM

A10 RFU - Was GNSS_3V3 A10 RFU - Was GNSS_3V3

C7 RFU - Was JTAG TRIG OUT C7 RFU - Was JTAG TRIG OUT

D13 RFU - Was VDD_MIPI D13 RFU - Was VDD_MIPI

D14 RFU - Was VIO_1V2 D14 RFU - Was VIO_1V2

F3 RFU - Was JTAG TRIG IN F3 RFU - Was JTAG TRIG IN

F14 RFU - Was VPP F14 RFU - Was VPP

G14 RFU - Was GNSS_EN G14 RFU - Was GNSS_EN

H3 RFU - Was GNSS_I2C_SDA H3 RFU - Was GNSS_I2C_SDA


80502NT11427A REV. 2.1 ................................................................................. PAGE 20 OF 27 2016-11-21

J3 RFU - Was GNSS_I2C_SCL J3 RFU - Was GNSS_I2C_SCL

J14 RFU - Was GNSS_NMEA_TX J14 RFU - Was GNSS_NMEA_TX

K3 RFU - Was GNSS_CAN0TX K3 RFU - Was GNSS_CAN0TX

K14 RFU - Was GNSS_NMEA_RX K14 RFU - Was GNSS_NMEA_RX

L3 RFU - Was GNSS_CAN0RX L3 RFU - Was GNSS_CAN0RX

N7 RFU - Was GPS_CLK N7 RFU - Was GPS_CLK

N8 RFU - Was GPS_RFPAON N8 RFU - Was GPS_RFPAON

N10 RFU - Was GNSS_INT N10 RFU - Was GNSS_INT

N11 RFU - Was GPS_32KHZ N11 RFU - Was GPS_32KHZ

N12 RFU - Was EXC_IND N12 RFU - Was EXC_IND

P12 RFU - Was WIFI_CMD on some designs P12 RFU - Was WIFI_CMD on some designs


80502NT11427A REV. 2.1 ................................................................................. PAGE 21 OF 27 2016-11-21

6. PIN MAP Figure 1 xE910 Form Factor [TOP VIEW]


80502NT11427A REV. 2.1 ................................................................................. PAGE 22 OF 27 2016-11-21

Figure 2 Updated Form Factor [TOP VIEW]

A

BC

DE

FG

HJ

KL

MN

PR

1

ADC_IN1SIM

CLK2SIM

RST2GND

ANT_DIVGND

GNDGND

ANT_MAIN

GNDVBATT

VBATT_PAVBATT_PA

2GND

EAR+SIM

IO2SIM

VCC2GND

GNDGND

GNDGND

GNDGND

VBATTVBATT_PA

VBATT_PAGND

3SIM

VCCEAR-

JTAG_RESET*JTAG_TCK

JTAG_TDOJTAG_TRIGIN

JTAG_PS_HOLDGNSS_I2C_SDA

GNSS_I2C_SCLGNSS_CAN0TX

GNSS_CAN0RXGND

GNDGND

GND

4SIM

INM

IC+JTAG_TRST*

GNDSGM

II_RX_P SGM

II_RX_M

SIMIN2

ADC_IN2STAT_LED

TX_AUXRX_AUX

GNDGND

GNDANT_2

5SIM

IOM

IC-JTAG_TM

SSGM

II_TX_P

S/W_RDY

GNDGND

GND

6SIM

CLKDVI_RX

JTAG_TDISGM

II_TX_M

RESGND

GNDGND

7SIM

RSTDVI_TX

JTAG_TRIGOUTADC_IN3

GND GND

GND

GPIO_20

GPS_CLKGNSS_PPS

GPS_LNA_EN

8USB_SIM

_DDVI_CLK

GPIO_01USB_SS_TX_M

GND GND

GND

W

CI_TXD_TGPIO24 GPS_RFPAON

GNDGND

9USB_SIM

_D+DVI_W

A0GPIO_02

USB_SS_TX_P

GND

GND GND

WCI_RXD_TGPIO25

GPS_SYNCGND

ANT_GPS

10GNSS_3V3

I2C_SDAGPIO_03

USB_SS_RX_P

RFCLK2_QCAGPS_INT

GNDGND

11HSIC_STB

I2C_SCLGPIO_04

USB_SS_RX_M

WLAN_SLEEP_CLK

GPS_32KHZRESET_BB*

VAUX/PWRM

ON

12HSIC_DATA

REF_CLKGPIO_06

HW_KEY

MM

C_DAT0 M

MC_CLK

MM

C_DAT1 M

MC_DAT3

MM

C_CMD

MM

C_DAT2W

IFI_SDRSTGND

EXC_INDON_OFF

ON_OFF*

13VUSB

GNDGPIO_07

VDD_MIPI

VSD2_1V8VM

MC

MM

C_CDW

IFI_SD3W

IFI_SD0W

IFI_SD2W

IFI_SDCLKW

IFI_SD1W

IFI_SDCMD

GNDHW

_SHUTDOWN*

14USB_ID

GPIO_05VRTC

VIO_1V2GND

VPPGNSS_EN

SPI_CSGNSS_NM

EA_TXGNSS_NM

EA_RXC105/RTS

C108/DTRC109/DCD

C107/DSRC125/RING

15

USB_D+USB_D-

SPI_MOSI / TX_AUX

SPI_MISO/RX_AUX

SPI_CLKGPIO_10

SPI_MRDY

SPI_SRDYGPIO_08

GPIO_09C104/RXD

C103/TXDC106/CTS


80502NT11427A REV. 2.1 ................................................................................. PAGE 23 OF 27 2016-11-21

7. LAYOUT DIMENSION

Figure 3 xE910 Current Form Factor [TOP VIEW]


80502NT11427A REV. 2.1 ................................................................................. PAGE 24 OF 27 2016-11-21

Figure 4 Updated Form Factor [TOP VIEW]


80502NT11427A REV. 2.1 ................................................................................. PAGE 25 OF 27 2016-11-21

8. CURRENT XE910 VS UPDATED XE910 LAYOUT COMPARISON (TOP VIEW)


80502NT11427A REV. 2.1 ................................................................................. PAGE 26 OF 27 2016-11-21

9. DOCUMENT HISTORY

Revision Date Changes

1 2016-02-21 First issue

2 2016-11-20 Updated AUX UART location

2.1 2016-11-21 Updated few minor typos

[04.

2016

]