16
PC400LC-6 PC400LC-6 WITH SA6D125E-2 S TANDARD AND V ARIABLE G AUGE NET HORSEPOWER 228 kW 306 HP OPERATING WEIGHT 42705 – 45140 kg 94,147 – 99,517 lb H YDRAULIC E XCAVATOR

XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

PC400LC-6

PC400LC-6 WITH SA6D125E-2STANDARD AND VARIABLE GAUGE

NET HORSEPOWER228 kW 306 HP

OPERATING WEIGHT42705 – 45140 kg

94,147 – 99,517 lb

HY

DR

AU

LIC

EX

CAVA

TO

R

Page 2: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

2

PC400LC-6 Hydraulic Excavator

WALK-AROUNDWALK-AROUND

High pressure hydraulic systemhelps provide fast cycle times.

Komatsu distributors offer a widevariety of attachments that take advantageof the PC400’s exceptional versatility.

Cushioned cylinders minimize shock.

Since its original introduction, the PC400 has set new standards for productivity and control. ThePC400LC-6 introduces several new features to providethe operator with a faster, quieter, and easier-to-servicemachine. Combine these features with outstandingresale value, and you will know why over 90% of our customers gave an “excellent” rating for ourexcavator design and technology.

Cast steel is used for criticalparts on both the boom and armfor increased durability.

One-piece top and bottom plates for both the boom and arm providemaximum strength.

Page 3: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

3

NET HORSEPOWER228 kW 306 HP @ 2050 rpm

OPERATING WEIGHT42705 – 45140 kg 94,147 – 99,517 lb

BUCKET CAPACITY1.25 – 2.29 m3

1.63 – 3.00 yd3

PC400LC-6HYDRAULIC EXCAVATOR

Emissionized engine, at 228 kW 306 HP, it is one ofthe most powerful in its class.

Three-speed motorprovides smooth andefficient job site travel.

Comfortable Cab Komatsu’s low-noise cabdesign uses viscous cab mounts for reduced noiseand vibration.

Large boomcylinders provide maximum lift capacity.

Windshield wiper ismounted to the cab for bettervisibility and easier windowopening.

Large undercarriage issealed for maximum durability.

Windshield wiper ismounted to the cab for bettervisibility and easier windowopening.

Protected Hydraulic CircuitThe cool-running hydraulic system is protected with the most extensive filtration system available,including a high pressure in-line filter.

Advanced Monitor Features● Self-diagnosis of 119 different problems.● Five working modes as standard,

including breaker mode for maximumproductivity.

● Active mode for increased implement speed.

Page 4: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

Power, versatility, maneuverability, controllability—you

name it. Never has there been an excavator so easy to

operate, so natural, so intuitive, so responsive.

HydrauMind allows the load-sensing and pressure

compensating valves to automatically adjust to individual

work applications. Adjustments are sensed by the valves.

Electronic controls maximize the engine horsepower so

full horsepower is available at all times.

For example, when the ground condition changes while

digging, you don’t have to think about changing lever strokes

because HydrauMind instantly, silently, and automatically

sends just the right amount of oil to the actuators at just

the right pressure to accommodate the change.

When you move the boom, arm, and bucket at the

same time, all the equipment works naturally, with

the optimum combination of speed and power

as if it were a human hand.

HydrauMind also makes it easy

to change or add valves

and work equipment.

EngineThe new Komatsu SA6D125E-2 meets emission regulations,

including CARB. New hydraulic pumps produce the same

power as in the previous model at reduced engine speed.

The new engine provides improved emissions without

sacrificing valuable hydraulic power. Also, noise levels

are reduced for improved operator comfort.

In-Line FiltrationThe PC400 has a cool-running hydraulic system with the

most extensive filtration system available. It uses a new

high-performance filter glass for improved cleanliness and

extended replacement interval. The wide variety of attach-

ments available today means you put more stress on

your excavator than ever before. Komatsu provides

the extra protection for your machine by providing

a high-pressure in-line filter as standard

equipment.

PRODUCTIVITYFEATURES

PRODUCTIVITYFEATURES

4

Page 5: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

Working Mode Application Advantage

● Maximum production/powerH/O Heavy-Duty ● Fast cycle times

● Power up/speed down available

● Good cycle timesG/O General ● Good fuel economy

● Power up/speed down available

F/O Finishing ● Smooth finishing capability● Arm in 1⁄2 speed

L/O Lifting ● Powerful lifting● Power maximum pressure

100% of the time● Reduced speed● Precision control

B/O Breaker ● Optimum engine rpm, hydraulicOperations flow, and pressure

Power Up/Speed Down Switch*

A button on top of the left joystick provides an instant burst of power

at either full speed or half speed depending on the selection made on the monitor.

Selection Application Result

Power Up Tough Digging Increase implement force Operations by 9% for 8.5 seconds.

Speed Delicate Speed is reduced by 1⁄2. Down Operations Increase implement force by

9% as long as joystick button is pressed.

*Available in H/O and G/O mode only.

Four Diagnostic Modes

Time Display mode is thedefault mode and shows the timeand hour meter reading.

User Code Display modedisplays a trouble code and soundsan alarm when a problem has beendetected.

Trouble Data Memory modemonitors 32 separate items andstores up to 20 abnormalities over 999 hours for effectivetroubleshooting.

Operation Data modemonitors 20 separate currentoperating conditions includingsystem pressure and rpms to keepyour machine operating at peakperformance. In addition, 44-bitpatterns allow you to diagnoseelectrical connections.

Together these modes allow you to troubleshoot 119 differentproblems to minimize downtime.

Self-DiagnosticMonitorEasy Operation

PC400LC-6HYDRAULIC EXCAVATOR

5

1

2

3

4

Self-Diagnostic System

The PC400 features the most advanced diagnostic system in the industry. Komatsu’s

exclusive system identifies 119 items, reduces diagnostic time, and helps you maintain

maximum production.

Working Mode Selection

The Avance excavator is equipped with five working modes. Each mode is

designed to match engine speed, pump speed, and system pressure with

the current application.

The LCD portion of the monitor hasfour different display modes that aid inidentifying potential problems beforethey become major problems:

Working Mode

Power Up/Speed Down

Travel Speeds

Active ModeThe Active modeincreases enginespeed, pump flow,and boom downspeed to improveproductivity up to7%. Under lightloads, equipmentspeed is faster.When under heavyloads it is possibleto detect enginespeed.

Travel Speeds

The Avance excavator is equipped with three travel speeds to provide smooth,

efficient travel around the job site.

Page 6: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

WORKINGENVIRONMENT

WORKINGENVIRONMENT

Multi-Position Controls

The multi-position, pressure proportional control levers allow the operator

to work in comfort while maintaining precise control.

A double slide mechanism allows the seat and controllers to move together or

independently, allowing the operator to position the controllers for maximum

productivity and comfort.

The multi-position diagnostic monitor is easily reached and can be rotated to

remove glare. Plus, the inclined dashboard makes the switches and fuel control

dials easier to view and use.

Cab Mounts

The cab rests on viscous damping mounts to reduce vibration and noise from

the machine body. Operator fatigue is reduced.

Noise

The noise levels at the operator’s ear have been decreased by improving the

cab mounts. In addition, a mixed-flow fan reduces fan speed and channels air

around the engine, reducing noise.

Floor

Revolving Frame

Rubber

Silicon Oil

Cab Mounts

The Avance cab interior is spacious and provides a comfortable working environment.

6

Page 7: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

1. ADJUSTABLEMONITOR

2. STARTERSWITCH

3. FUEL CONTROLDIAL

4. INCLINEDDASHBOARD

5. ADJUSTABLEARMRESTS

6. OPTIONAL AIRCONDITIONING

7. FULLY ADJUST-ABLE SEAT

8. HOT / COLDSTORAGECOMPARTMENTS

9. LOW EFFORTJOYSTICKS

10. OPERATORWEIGHTADJUSTMENT

7

8

9

10

1

4

2

3

5

6

1. ADJUSTABLEMONITOR

2. STARTERSWITCH

3. FUEL CONTROLDIAL

4. INCLINEDDASHBOARD

5. ADJUSTABLEARMRESTS

6. OPTIONAL AIRCONDITIONING

7. FULLY ADJUST-ABLE SEAT

8. HOT / COLDSTORAGECOMPARTMENTS

9. LOW EFFORTJOYSTICKS

10. OPERATORWEIGHTADJUSTMENT

7

PC400LC-6HYDRAULIC EXCAVATOR

Page 8: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

SWING SYSTEM

Driven by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic motorSwing reduction. . . . . . . . . . . . . . . . . . . . Planetary double reductionSwing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . Grease-bathedSwing lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oil discSwing speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.3 rpm

UNDERCARRIAGE

Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frameTrack frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-sectionSeal of track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed trackTrack adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HydraulicNumber of shoes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 per sideNumber of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . . 2 per sideNumber of track rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 per side

COOLANT AND LUBRICANT

CAPACITY (REFILLING)

Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605 ltr 160.0 U.S. galRadiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47.0 ltr 12.4 U.S. galEngine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.0 ltr 8.5 U.S. galFinal drive, each side . . . . . . . . . . . . . . . . . . 11.5 ltr 3.0 U.S. galSwing drive . . . . . . . . . . . . . . . . . . . . . . . . . . 21.5 ltr 5.7 U.S. galHydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . 270 ltr 71.3 U.S. gal

OPERATING WEIGHT

Operating weight, including 7060 mm 23'2" one-piece boom, 3380 mm 11'1" arm, SAE heaped 1.82 m3 2.38 yd3 backhoe bucket,operator, lubricant, coolant, full fuel tank, and the standard equipment.

Triple-Grouser Shoes Operating Weight Ground Pressure600 mm 42704 kg 0.77 kg/cm2

24" 94,147 lb 10.95 psi700 mm 42600 kg 0.66 kg/cm2

28" 95,147 lb 9.36 psi800 mm 43607 kg 0.59 kg/cm2

31.5" 96,137 lb 8.36 psi900 mm 44110 kg 0.53 kg/cm2

35.5" 97,245 lb 7.49 psiMaximum 44792 kg 0.54 kg/cm2

Weight 98,749 lb 7.61 psi

Arm Length Weight Adjustments2400 mm 7'10" –167 kg –368 lb2900 mm 9'6" –49 kg –108 lb4000 mm 13'1" +240 kg +529 lb4800 mm 15'9" +372 kg +820 lb

SPECIFICATIONSSPECIFICATIONSENGINE

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SA6D125E-2Type . . . . . . . . . . . . . . . . . . . . 4-cycle, water-cooled, direct injectionAspiration . . . . . . . . . . . . . . . . . . . . . . Turbocharged and aftercooledNumber of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 mm 4.92"Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mm 5.91"Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . 11.04 ltr 674 in3

Rated gross horsepower . . . . . . . . . . 238.6 kW 320 HP at 2050 rpm(SAE J1349)

Flywheel horsepower . . . . . . . . . . . . . . 228 kW 306 HP at 2050 rpm(SAE J1349)

Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . All-speed, mechanical

Meets 1996 EPA emission standards.

HYDRAULIC SYSTEM

Type. . . . . . . . . . . . . . . . . . . . . HydrauMind system, a closed-center system with load sensing valves and

pressure compensated valves.

Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 5

Main pump:Type . . . . . . . . . . . . . . . . . . . Variable-displacement piston pumpsPumps for. . . . . . . . . Boom, arm bucket, swing, and travel circuits

Maximum flow . . . . . . . . . . . . . . . . . . . . . 652 ltr 2 x 86 U.S. gal/min

Hydraulic motors:Travel . . . . . . . . . . . . . . . 2 x axial piston motor with parking brakeSwing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 x axial piston motor

Relief valve setting:Implement circuits . . . . . . . . . . . . . . . . . . . 355 kg/cm2 5,050 psiTravel circuit. . . . . . . . . . . . . . . . . . . . . . . . 355 kg/cm2 5,050 psiSwing circuit. . . . . . . . . . . . . . . . . . . . . . . . 285 kg/cm2 4,050 psiPilot circuit . . . . . . . . . . . . . . . . . . . . . . . . . . 30 kg/cm2 430 psiService valve . . . . . . . . . . . . . . . . . . . . . . . 210 kg/cm2 2,990 psi

Hydraulic cylinders:Number of cylinders – bore x strokeBoom. . . . . . . . . . . . . . . . . . 2 – 160 mm x 1570 mm 6.3" x 61.8"Arm . . . . . . . . . . . . . . . . . . . 1 – 185 mm x 1820 mm 7.3" x 71.7"Bucket . . . . . . . . . . . . . . . . . 1 – 160 mm x 1270 mm 6.3" x 50.0"

Service valves maximum flow:First valve. . . . . . . . . . . . . . . . . . . . . . . 480 ltr 126.8 U.S. gal/minSecond valve . . . . . . . . . . . . . . . . . . . . 240 ltr 63.4 U.S. gal/minThird valve . . . . . . . . . . . . . . . . . . . . . . 240 ltr 63.4 U.S. gal/min

DRIVES AND BRAKES

Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedalsDrive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fully hydrostaticTravel motor. . . . . . . . . . . . . . . . . . . . . . . Axial piston motor, in-shoeMaximum drawbar pull . . . . . . . . . . . . . . . . . . . . 33700 kg 74,300 lbMaximum travel speed: High . . . . . . . . . . . . . . . . . 5.5 km/h 3.4 mph

Mid. . . . . . . . . . . . . . . . . . 4.5 km/h 2.8 mphLow . . . . . . . . . . . . . . . . . 3.2 km/h 2.0 mph

Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lockParking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oil disc brake

Maximum operating weight also includes: 4800 mm 15'9" arm, and 1.82 m3 2.38 yd3 heavy-duty bucket.

PC400LC-6

8

Page 9: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

BACKHOE BUCKET AND ARM COMBINATION

WORKING RANGE AND BUCKET/ARM COMBINATION WITH STANDARD UNDERCARRIAGE

DIMENSIONS WITH STANDARD UNDERCARRIAGE

PC400LC-6HYDRAULIC EXCAVATOR

G

EC

O

F

N

A

H,QD

P

I

BJ

K M

L

Arm 2400 mm 7'10" 2900 mm 9'6" 3380 mm 11'1" 4000 mm 13'1" 4800 mm 15'9"

A Overall length 11915 mm 39'1" 11885 mm 39'0" 11835 mm 38'10" 11850 mm 38'11" 11685 mm 38'4"

B Overall length (transport) 8435 mm 27'8" 7425 mm 24'4" 6685 mm 21'11" 6220 mm 20'5" 6025 mm 19'9"

C Overall height (to top of boom) 3715 mm 12'2" 3730 mm 12'3" 3635 mm 11'11" 3795 mm 12'5" 4385 mm 14'5"

D Overall width 3440 mm 11'3"

E Overall height (to top of cab) 3265 mm 10'9"

F Ground clearance, counterweight 1320 mm 4'4"

G Ground clearance (minimum) 555 mm 1'10"

H Tail swing radius 3500 mm 11'6"

I Track length on ground 4350 mm 14'3"

J Track length 5355 mm 17'7"

K Track gauge 2740 mm 9'0"

L Width of crawler 3440 mm 11'3"

M Shoe width 700 mm 28"

N Grouser height 37 mm 1.5"

O Machine cab height 2715 mm 8'11"

P Upper structure width 2995 mm 9'10"

Q Distance, swing center to rear end 3500 mm 11'6"

A B

C E

H

D

GF

2400 7'10" 2900 9'6" 3380 11'1" 4000 13'1" 4800 15'9"

A Max. digging height 10295 33'9" 10305 33'10" 10920 35'10" 11045 36'3" 11505 37'9"

B Max. dumping height 7055 23'2" 7095 23'3" 7570 24'10" 7725 25'4" 8155 26'9"

C Max. digging depth 6785 22'3" 7285 23'11" 7760 25'6" 8385 27'6" 9195 30'2"

D Max. vertical walldigging depth 5335 17'6" 5680 18'8" 6850 22'6" 7280 23'11" 8215 26'11"

E Max. digging depthof cut for 8' level 6585 21'7" 7095 23'3" 7620 25'0" 8255 27'1" 9080 29'9"

F Max. digging reach 11055 36'3" 11435 37'6" 12020 39'5" 12550 41'2" 13350 43'10"

G Max. digging reachat ground level 10830 35'6" 11220 36'10" 11810 38'9" 12355 40'6" 13165 43'2"

H Min. swing radius 4855 15'11" 4825 15'10" 4770 15'8" 4800 15'9" 4885 16'0"

Bucket digging force* 22800 kg 22700 kg 22900 kg 22700 kg 22600 kg50,260 lb 50,040 lb 50,490 lb 50,040 lb 49,820 lb

Arm crowd force* 26200 kg 23200 kg 19600 kg 17600 kg 15400 kg57,760 lb 51,150 lb 43,210 lb 38,800 lb 33,950 lb

*at power max

9

V – Used with weights up to 3,500 lb/yd3, W – Used with weights up to 3,000 lb/yd3

X – Used with weights up to 2,500 lb/yd3, Y – Used with weights up to 2,000 lb/yd3, Z – Not useable

Bucket Arms

Bucket NumberType Capacity OLW Weight of Teeth Tooth Size 7'10" 9'6" 11'1" 13'1" 15'9"

1.37 m3 1.79 yd3 762 mm 36" 1585 kg 3,494 lb 4 X370 V V V V V1.67 m3 2.18 yd3 914 mm 42" 1761 kg 3,882 lb 4 X370 V V V V X

Komatsu 1.97 m3 2.57 yd3 1067 mm 48" 1891 kg 4,169 lb 5 X370 V V W X Y“H” Series 2.27 m3 2.97 yd3 1219 mm 54" 2050 kg 4,520 lb 5 X370 V W X Y Z

SD 2.58 m3 3.37 yd3 1372 mm 60" 2182 kg 4,810 lb 6 X370 W X Y Y Z

1.39 m3 1.82 yd3 762 mm 36" 1533 kg 3,379 lb 4 X370AP V V V V V1.69 m3 2.21 yd3 914 mm 42" 1700 kg 3,748 lb 4 X370AP V V V V X

Komatsu 2.00 m3 2.61 yd3 1067 mm 48" 1789 kg 3,945 lb 5 X370AP V V W X Y“H” Series 2.30 m3 3.01 yd3 1219 mm 54" 1935 kg 4,267 lb 5 X370AP V W X Y Z

HD 2.61 m3 3.41 yd3 1372 mm 60" 2051 kg 4,522 lb 6 X370AP W X Y Y Z

Page 10: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

Arm: 2400 mm 7'10" Unit: kg lb

A 1.5 m 5' 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' Maximum

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs

7.6 m *9800 8550 *9700 805025' *21,600 18,800 *21,400 17,800

6.1 m *10150 8400 *9600 655020' *22,300 18,500 *20,900 14,400

4.6 m *17500 *17550 *13200 11600 *10850 8100 *9500 5850 *9450 570015' *38,700 *38,700 *29,100 25,500 *24,000 17,800 *21,000 12,900 *20,800 12,600

3.0 m *14800 10800 *11700 7700 9650 5700 9000 530010' *32,600 23,800 *25,800 17,000 21,300 12,600 19,900 11,700

1.5 m *15850 10200 *12300 7350 9500 5500 8850 51505' *34,900 22,500 *27,100 16,200 20,900 12,200 19,500 11,400

0.0 m *19950 15300 *16000 9900 12400 7150 9350 5400 9100 53000' *44,000 33,700 *35,300 21,800 27,400 15,700 20,600 11,900 20,100 11,600

–1.5 m *19700 15400 *15300 9850 *1200 7050 *9850 5750–5' *43,400 33,900 *33,800 21,700 *26,400 15,600 *21,700 12,700

–3.0 m *20350 *20350 *17200 15700 *13650 9950 *10500 7150 *9750 6750–10' *44,900 *44,900 *37,900 34,600 *30,100 22,000 *23,100 15,800 *21,600 14,900

–4.6m *13250 *13250 *10400 10300 *9150 9050–15' *29,200 *29,200 *23,000 22,800 *20,100 19,900

B

A

C

PC400LC-6 LIFTING CAPACITY WITH STANDARD UNDERCARRIAGE

Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping.

Arm: 2900 mm 9'6" Unit: kg lb

A 1.5 m 5' 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' Maximum

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs

7.6 m *9100 8650 *8900 730025' *20,000 19,100 *19,600 16,100

6.1 m *9550 8500 *8800 6000 *8750 600020' *21,100 18,700 *19,400 13,300 *19,300 13,300

4.6 m *16500 *16500 *12500 11750 *10350 8150 *9100 5900 *8800 530015' *36,400 *36,400 *27,500 25,900 *22,900 18,000 *20,100 13,000 *19,400 11,700

3.0 m *20050 16850 *14200 10950 *11300 7750 *9550 5700 8400 490010' *44,200 37,200 *31,300 24,200 *24,900 17,100 *21,000 12,600 18,500 10,800

1.5 m *20200 15700 *15500 10300 *12050 7350 9450 5500 8250 47505' *44,500 34,600 *34,200 22,700 *26,500 16,300 20,900 12,100 18,200 10,500

0.0 m *21800 15300 *15950 9900 *12350 7100 9300 5350 8450 48500' *48,000 33,700 *35,200 21,900 *27,300 15,700 20,500 11,800 18,700 10,700

–1.5 m *15300 *15300 *20550 15300 *15600 9750 *12150 7000 9250 5300 9100 5250–5' *33,800 *33,800 *45,400 33,700 *34,300 21,500 *26,700 15,400 20,400 11,700 20,100 11,500

–3.0 m *23450 *23450 *18400 15500 *14250 9800 *11050 7050 *9450 6050–10' *51,700 *51,700 *40,600 34,200 *31,400 21,700 *24,400 15,500 *20,900 13,400

–4.6 m *18450 *18450 *14900 *14900 *11650 10100 *92200 7800–15' *40,700 *40,700 *32,900 *32,900 *25,700 22,300 *20,300 17,200

Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping.

Equipment:● Boom: 7060 mm 23'2"● Bucket: 1.8 m3 2.38 yd3

● Shoes: 900 mm 35.4" ● Lifting Mode

A: Reach from swing centerB: Bucket hook heightC: Lifting capacityCf: Rating over frontCs: Rating over side

: Rating at maximum reach

10

Page 11: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

Arm: 3380 mm 11'1" Unit: kg lbA 1.5 m 5' 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' Maximum

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs7.6 m *5750 *5750

25' *12,700 *12,7006.1 m *9000 8650 *8300 6150 *5750 5300

20' *19,900 19,000 *18,300 13,500 *12,600 11,6004.6 m *11800 *11800 *9900 8250 *8750 6000 *5900 4700

15' *26,000 *26,000 *21,800 18,200 *19,300 13,200 *13,000 10,4003.0 m *19000 17400 *13650 11200 *10900 7850 *9250 5750 *6200 4400

10' *41,900 38,400 *30,100 24,700 *24,000 17,300 *20,400 12,700 *13,700 9,7001.5 m *21450 16050 *15150 10450 *11750 7450 9500 5550 *6750 4250

5' *47,300 35,400 *33,400 23,100 *26,000 16,400 20,900 12,200 *14,900 9,4000.0 m *21100 15400 *15900 10000 *12250 7150 9300 5350 *7650 4350

0' *46,500 34,000 *35,000 22,000 *27,100 15,800 20,500 11,800 *16,800 9,600–1.5 m *13350 *13350 *21200 15250 *15800 9750 12250 7000 9200 5250 8150 4650

–5' *29,500 *29,500 *46,800 33,700 *34,800 21,500 27,000 15,400 20,300 11,600 18,000 10,300–3.0 m *15150 *15150 *19650 *19650 *19400 15400 *14700 9750 *11450 6950 *8700 5300 *8650 5300

–10' *33,400 *33,400 *43,400 *43,400 *42,800 33,900 *32,600 21,500 *25,300 15,300 *19,200 11,700 *19,100 11,700–4.6 m *21300 *21300 *16350 15750 *12650 9950 *9500 7150 *8450 6550

–15' *47,000 *47,000 *36,100 34,700 *27,800 22,000 *20,900 15,700 *18,700 14,500–6.1 m *11350 *11350 *8400 *8400 *7500 *7500

–20' *25,000 *25,000 *18,500 *18,500 *16,600 *16,600

Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping.

Arm: 4000 mm 13'1" Unit: kg lbA 1.5 m 5' 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' Maximum

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs7.6 m *7100 6300 *4850 *4850

25' *15,700 13,900 *10,700 *10,7006.1 m *7650 6200 *4800 4700

20' *16,900 13,700 *10,600 10,4004.6 m *9150 8350 *8150 6000 *6200 4400 *4950 4200

15' *20,200 18,400 *17,900 13,200 *13,700 9,700 *10,900 9,3003.0 m *17050 17050 *12650 11350 *10200 7900 *8750 5750 7450 4250 *5200 3900

10' *37,600 37,600 *27,900 25,000 *22,500 17,400 *19,300 12,700 16,400 9400 *11,500 8,6001.5 m *20350 16300 *14350 10550 *11200 7450 *9300 5500 7300 4150 *5650 3800

5' *44,800 35,900 *31,700 23,200 *24,700 16,400 *20,500 12,100 16,100 9,100 *12,500 8,4000.0 m *8800 *8800 *21650 15400 *15450 9950 *11900 7050 9200 5250 7150 4000 *6350 3850

0' *19,400 *19,400 *47,700 33,900 *34,000 21,900 *26,200 15,600 20,300 11,600 15,800 8,900 *14,000 8,500–1.5 m *8900 *8900 *12850 *12850 *21500 15050 *15700 9600 12100 6850 9050 5100 7300 4100

–5' *19,700 *19,700 *28,300 *28,300 *47,400 33,200 *34,600 21,200 26,700 15,100 20,000 11,300 16,100 9,000–3.0 m *13300 *13300 *17850 *17850 *20200 15050 *15050 9500 *11650 6750 9050 5100 *8100 4600

–10' *29,300 *29,300 *39,300 *39,300 *44,500 33,200 *33,200 21,000 *25,700 14,900 19,900 11,200 *17,800 10,100–4.6 m *18250 *18250 *24200 *24200 *17700 15300 *13450 9650 *10300 6850 *8100 5550

–15' *40,200 *40,200 *53,300 *53,300 *39,000 33,700 *29,600 21,300 *22,700 15,100 *17,800 12,200–6.1 m *17800 *17800 *13550 *13550 *10250 10000 *7650 *7600

–20' *39,200 *39,200 *29,900 *29,900 *22,700 22,000 *16,900 *16,700

Arm: 4810 mm 15'9" Unit: kg lbA 1.5 m 5' 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' Maximum

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs7.6 m *3700 *3700

25' *8,100 *8,1006.1 m *6850 6350 *5900 4600 *3650 *3650

20' *15,100 14,000 *13,000 10,100 *8,000 *8,0004.6 m *7400 6150 *6850 4500 *3750 3600

15' *16,400 13,500 *15,200 9,900 *8,200 8,0003.0 m *11400 *11400 *9350 8100 *8100 5850 *7250 4300 *3900 3400

10' *25,100 *25,100 *20,700 17,800 *17,900 12,900 *16,000 9500 *8,600 7,5001.5 m *18750 16950 *13350 10800 *10550 7550 *8800 5550 7300 4150 *4200 3300

5' *41,300 37,400 *29,500 23,900 *23,200 16,700 *19,400 12,200 16,100 9,100 *9,300 7,2000.0 m *9400 *9400 *20950 15700 *14800 10100 *11450 7150 9250 5250 7150 4000 *4650 3330

0' *20,700 *20,700 *46,200 34,600 *32,700 22,300 *25,200 15,700 20,400 11,600 15,700 8,800 *10,300 7,300–1.5 m *7500 *7500 *11900 *11900 *21600 15050 *15500 9650 *11950 6800 9000 5050 7000 3900 *5350 3500

–5' *16,600 *16,600 *26,200 *26,200 *47,600 33,200 *34,200 21,200 *26,300 15,000 19,900 11,200 15,500 8600 *11,800 7,700–3.0 m *11050 *11050 *15600 *15600 *21000 14850 *15350 9400 *11850 6650 8900 4950 *6700 3850 *6400 3850

–10' *24,400 *24,400 *34,400 *34,400 *46,300 32,800 *33,900 20,800 *26,100 14,700 19,700 11,000 *14800 8500 *14,100 8500–4.6 m *15100 *15100 *20450 *20450 *19200 15000 *14300 9400 *11050 6650 *8500 5000 *7400 4500

–15' *33,300 *33,300 *45,100 *45,100 *42,300 33,000 *31,600 20,800 *24,300 14,700 *18,700 11,000 *16,300 9,900–6.1 m *19900 *19900 *22200 *22200 *16000 15350 *12100 9650 *9050 6850 *7250 5800

–20' *43,900 *43,900 *49,000 *49,000 *35,300 33,800 *26,600 21,200 *19,900 15,100 *16,000 12,800–7.6 m *10650 *10650 *7650 *7650 *6450 *6450

–25' *23,500 *23,500 *16,900 *16,900 *14,200 *14,200

11

PC400LC-6HYDRAULIC EXCAVATOR

Page 12: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

SWING SYSTEM

Driven by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic motorSwing reduction. . . . . . . . . . . . . . . . . . . . Planetary double reductionSwing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . Grease-bathedSwing lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oil discSwing speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.3 rpm

UNDERCARRIAGE

Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frameTrack frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-sectionSeal of track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed trackTrack adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HydraulicNumber of shoes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 per sideNumber of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . . 2 per sideNumber of track rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 per side

COOLANT AND LUBRICANT

CAPACITY (REFILLING)

Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605 ltr 160.0 U.S. galRadiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47.0 ltr 12.4 U.S. galEngine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.0 ltr 8.5 U.S. galFinal drive, each side . . . . . . . . . . . . . . . . . . 11.5 ltr 3.0 U.S. galSwing drive . . . . . . . . . . . . . . . . . . . . . . . . . . 21.5 ltr 5.7 U.S. galHydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . 270 ltr 71.3 U.S. gal

OPERATING WEIGHT

Operating weight, including 7060 mm 23'2" one-piece boom, 3380 mm 11'1" arm, SAE heaped 1.82 m3 2.38 yd3 backhoe bucket,operator, lubricant, coolant, full fuel tank, and the standard equipment.

ENGINE

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SA6D125E-2Type . . . . . . . . . . . . . . . . . . . . 4-cycle, water-cooled, direct injectionAspiration . . . . . . . . . . . . . . . . . . . . . . Turbocharged and aftercooledNumber of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 mm 4.92"Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mm 5.91"Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . 11.04 ltr 674 in3

Rated gross horsepower . . . . . . . . . . 238.6 kW 320 HP at 2050 rpm(SAE J1349)

Flywheel horsepower . . . . . . . . . . . . . . 228 kW 306 HP at 2050 rpm(SAE J1349)

Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . All-speed, mechanical

Meets 1996 EPA emission standards.

HYDRAULIC SYSTEM

Type. . . . . . . . . . . . . . . . . . . . . HydrauMind system, a closed-center system with load sensing valves and

pressure compensated valves.

Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 5

Main pump:Type . . . . . . . . . . . . . . . . . . . Variable-displacement piston pumpsPumps for. . . . . . . . . Boom, arm bucket, swing, and travel circuits

Maximum flow . . . . . . . . . . . . . . . . . . . . . 652 ltr 2 x 86 U.S. gal/minSub-pump for control circuit. . . . . . . . . . . . . . . . . . . . . . . Gear pump

Hydraulic motors:Travel . . . . . . . . . . . . . . . 2 x axial piston motor with parking brakeSwing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 x axial piston motor

Relief valve setting:Implement circuits . . . . . . . . . . . . . . . . . . . 355 kg/cm2 5,050 psiTravel circuit. . . . . . . . . . . . . . . . . . . . . . . . 355 kg/cm2 5,050 psiSwing circuit. . . . . . . . . . . . . . . . . . . . . . . . 285 kg/cm2 4,050 psiPilot circuit . . . . . . . . . . . . . . . . . . . . . . . . . . 30 kg/cm2 430 psiService valve . . . . . . . . . . . . . . . . . . . . . . . 210 kg/cm2 2,990 psi

Hydraulic cylinders:Number of cylinders – bore x strokeBoom. . . . . . . . . . . . . . . . . . 2 – 160 mm x 1570 mm 6.3" x 61.8"Arm . . . . . . . . . . . . . . . . . . . 1 – 185 mm x 1820 mm 7.3" x 71.7"Bucket . . . . . . . . . . . . . . . . . 1 – 160 mm x 1270 mm 6.3" x 50.0"

Service valves maximum flow:First valve. . . . . . . . . . . . . . . . . . . . . . . 480 ltr 126.8 U.S. gal/minSecond valve . . . . . . . . . . . . . . . . . . . . 240 ltr 63.4 U.S. gal/minThird valve . . . . . . . . . . . . . . . . . . . . . . 240 ltr 63.4 U.S. gal/min

DRIVES AND BRAKES

Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedalsDrive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fully hydrostaticTravel motor. . . . . . . . . . . . . . . . . . . . . . . Axial piston motor, in-shoeMaximum drawbar pull . . . . . . . . . . . . . . . . . . . . 33700 kg 74,300 lbMaximum travel speed: High . . . . . . . . . . . . . . . . . 5.5 km/h 3.4 mph

Mid. . . . . . . . . . . . . . . . . . 4.5 km/h 2.8 mphLow . . . . . . . . . . . . . . . . . 3.2 km/h 2.0 mph

Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lockParking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oil disc brake

Triple-Grouser Shoes Operating Weight Ground Pressure600 mm 43286 kg 0.78 kg/cm2

24" 95,429 lb 11.14 psi700 mm 43740 kg 0.67 kg/cm2

28" 96,429 lb 9.55 psi800 mm 44189 kg 0.60 kg/cm2

31.5" 97,419 lb 8.55 psi900 mm 44638 kg 0.54 kg/cm2

35.4" 98,409 lb 7.68 psiMaximum 45140 kg 0.55 kg/cm2

Weight 99,517 lb 7.80 psi

Arm Length Weight Adjustments2400 mm 7'10" –167 kg –368 lb2900 mm 9'6" –49 kg –108 lb4000 mm 13'1" +240 kg +529 lb4800 mm 15'9" +372 kg +820 lb

Maximum operating weight also includes: 4800 mm 15'9" arm, and 1.82 m3 2.38 yd3 heavy-duty bucket.

SPECIFICATIONSSPECIFICATIONSPC400LC-6 with Variable Gauge

12

Page 13: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

A B

C E

H

D

GF

G

EC

O

F

N

A

H,QD

P

I

BJ

K M

L

DIMENSIONS WITH VARIABLE GAUGE UNDERCARRIAGE

2400 7'10" 2900 9'6" 3380 11'1" 4000 13'1" 4800 15'9"

A Max. digging height 10410 34'2" 10410 34'2" 11050 36'4" 11160 36'7" 11620 38'1"

B Max. dumping height 7170 23'6" 7210 23'8" 7700 25'4" 7840 25'9" 8270 27'2"

C Max. digging depth 6710 22'0" 7210 23'8" 7630 25'0" 8310 27'3" 9120 30'0"

D Max. vertical walldigging depth 5260 17'4" 5560 18'3" 6720 22'0" 7150 23'6" 8090 26'6"

E Max. digging depthof cut for 8' level 6585 21'7" 7095 23'4" 7490 24'7" 8255 27'1" 9080 29'9"

F Max. digging reach 11060 36'3" 11450 37'6" 12020 39'5" 12560 41'2" 13370 43'10"

G Max. digging reachat ground level 10810 35'6" 11200 36'10" 11780 38'9" 12340 40'6" 13160 43'2"

H Min. swing radius 4850 15'11" 4620 15'2" 4770 15'8" 4700 15'5" 4670 15'4"

Bucket digging force* 22800 kg 22700 kg 22900 kg 22700 kg 22600 kg50,260 lb 50,040 lb 50,490 lb 50,040 lb 49,820 lb

Arm crowd force* 26200 kg 23200 kg 19600 kg 17600 kg 15400 kg57,760 lb 51,150 lb 43,210 lb 38,800 lb 33,950 lb

*at power max

WORKING RANGE AND BUCKET/ARM COMBINATION WITH VARIABLE GAUGE UNDERCARRIAGE

BACKHOE BUCKET AND ARM COMBINATION

Arm 2400 mm 7'10" 2900 mm 9'6" 3380 mm 11'1" 4000 mm 13'1" 4800 mm 15'9"

A Overall length 11890 mm 39'0" 11890 mm 39'0" 11835 mm 38'10" 11850 mm 38'11" 11740 mm 38'6"

B Overall length (transport) 8435 mm 27'8" 7425 mm 24'4" 6685 mm 21'11" 6220 mm 20'5" 6025 mm 19'9"

C Overall height (to top of boom) 3715 mm 12'2" 3790 mm 12'5" 3675 mm 12'0" 3880 mm 12'8" 4320 mm 14'2"

D Overall width 3440 mm 11'3"

E Overall height (to top of cab) 3400 mm 11'2"

F Ground clearance, counterweight 1455 mm 4'9"

G Ground clearance (minimum) 706 mm 2'4"

H Tail swing radius 3500 mm 11'6"

I Track length on ground 4350 mm 14'3"

J Track length 5355 mm 17'7"

K Track gauge 2870 mm 9'5"

L Width of crawler (retracted) 3070 mm 10'1"

L1 Width of crawler (extended) 3570 mm 11'9"

M Shoe width 700 mm 28"

N Grouser height 37 mm 1.5"

O Machine cab height 2850 mm 9'4"

P Upper structure width 2995 mm 9'10"

Q Distance, swing center to rear end 3500 mm 11'6"

13

PC400LC-6HYDRAULIC EXCAVATOR

V – Used with weights up to 3,500 lb/yd3, W – Used with weights up to 3,000 lb/yd3

X – Used with weights up to 2,500 lb/yd3, Y – Used with weights up to 2,000 lb/yd3, Z – Not useable

Bucket Arms

Bucket NumberType Capacity OLW Weight of Teeth Tooth Size 7'10" 9'6" 11'1" 13'1" 15'9"

1.37 m3 1.79 yd3 762 mm 36" 1585 kg 3,494 lb 4 X370 V V V V V1.67 m3 2.18 yd3 914 mm 42" 1761 kg 3,882 lb 4 X370 V V V V X

Komatsu 1.97 m3 2.57 yd3 1067 mm 48" 1891 kg 4,169 lb 5 X370 V V W X Y“H” Series 2.27 m3 2.97 yd3 1219 mm 54" 2050 kg 4,520 lb 5 X370 V W X Y Z

SD 2.58 m3 3.37 yd3 1372 mm 60" 2182 kg 4,810 lb 6 X370 W X Y Y Z

1.39 m3 1.82 yd3 762 mm 36" 1533 kg 3,379 lb 4 X370AP V V V V V1.69 m3 2.21 yd3 914 mm 42" 1700 kg 3,748 lb 4 X370AP V V V V X

Komatsu 2.00 m3 2.61 yd3 1067 mm 48" 1789 kg 3,945 lb 5 X370AP V V W X Y“H” Series 2.30 m3 3.01 yd3 1219 mm 54" 1935 kg 4,267 lb 5 X370AP V W X Y Z

HD 2.61 m3 3.41 yd3 1372 mm 60" 2051 kg 4,522 lb 6 X370AP W X Y Y Z

Page 14: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

14

B

A

C

Equipment:● Boom: 7060 mm 23'2"● Bucket: 1.8 m3 2.38 yd3

● Shoes: 800 mm 31.5" ● Lifting Mode

A: Reach from swing centerB: Bucket hook heightC: Lifting capacityCf: Rating over frontCs: Rating over side

: Rating at maximum reach

PC400LC-6 LIFTING CAPACITY WITH VARIABLE GAUGE

Arm: 2400 mm 7'10" Unit: kg lb

A 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' Maximum

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs

7.6 m *9800 8950 *9700 825025' *21,600 19,700 *21,400 18,200

6.1 m *11750 *11750 *10200 8750 *9450 675020' *26,000 *26,000 *22,500 19,300 *20,900 14,900

4.6 m *18200 *18200 *13350 12100 *10950 8450 *9550 6150 *9450 595015' *40,100 *40,100 *29,400 26,600 *24,100 18,600 *21,000 13,500 *20,800 13,100

3.0 m *14800 11150 *11750 8050 9600 5950 8950 555010' *32,600 24,600 *25,900 17,800 21,200 13,200 19,700 12,200

1.5 m *10750 10750 *12350 7700 9400 5800 8880 54505' *35,000 23,700 *27,200 17,000 20,800 12,800 19,500 12,000

0.0 m *20650 16250 *16000 10450 12350 7500 9300 5700 9150 56000' *45,500 35,800 *35,200 23,000 27,200 16,600 20,500 12,600 20,100 12,300

–1.5 m *16350 *16350 *19500 16350 *15200 10400 *11900 7450 *9850 6100–5' *36,100 *36,100 *43,000 36,100 *33,500 22,900 *26,200 16,400 *21,700 13,500

–3.0 m *20050 *20050 *16950 16650 *13450 10550 10300 7600 *9750 7250–10' *44,200 *44,200 *37,300 36,800 *29,600 23,200 22,700 16,700 *21,500 16,000

–4.6 m *12800 *12800 *10000 *10000 *9000 *9000–15' *28,200 *28,200 *22,100 *22,100 *19,900 *19,900

Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping.

Arm: 2900 mm 9'6" Unit: kg lb

A 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' Maximum

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs

7.6 m *9100 9050 *8900 750025' *20,100 20,000 *19,600 16,500

6.1 m *9600 8850 *8800 6300 *8750 620020' *21,200 19,500 *19,400 13,900 *19,300 13,700

4.6 m *16850 *16850 *12650 12300 *10450 8500 *9150 6200 *8800 550015' *37,100 *37,100 *27,900 27,100 *23,000 18,800 *20,100 13,600 *19,400 12,200

3.0 m *20300 17700 *14350 11450 *11350 8100 *9550 5950 8350 515010' *44,800 39,000 *31,600 25,300 *25,000 17,900 *21,100 13,200 18,400 11,300

1.5 m *20000 16600 *15550 10800 *12050 7750 9400 5800 8200 50005' *44,100 36,600 *34,300 23,900 *26,600 17,000 20,700 12,700 18,100 11,100

0 m *21700 16200 *15950 10450 12300 7500 9250 5650 8450 51500' *47,900 35,800 *35,200 23,000 27,100 16,500 20,400 12,400 18,700 11,400

–1.5 m *16000 *16000 *20400 16250 *15500 10300 *12050 7350 9200 5600 9150 5600–5' *35,300 *35,300 *45,000 35,800 *34,200 22,700 *26,600 16,300 20,300 12,300 20,200 12,300

–3.0 m *23100 *23100 *18150 16450 *14100 10400 *10900 7400 *9450 6500–10' *51,000 *51,000 *40,000 36,300 *31,100 22,900 *24,000 16,400 *20,900 14,300

–4.6 m *17900 *17900 *14500 14500 *11100 10450 *9150 8500–15' *39,500 *39,500 *32,000 32,000 *24,500 23,000 *20,200 18,700

Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping.

Page 15: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

15

Arm: 3380 mm 11'1" Unit: kg lbA 1.5 m 5' 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' Maximum

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *6000 *6000

30' *13,300 *13,3007.6 m *5800 *5800 *5750 *5750

25' *12,800 *12,800 *12,700 *12,7006.1 m *9100 9000 *8350 6450 *5750 5500

20' *20,000 19,900 *18,400 14,200 *12,700 12,1004.6 m *11950 *11950 *10000 8650 *8750 6250 *5900 4900

15' *26,400 *26,400 *22,000 19,000 *19,300 13,800 *13,000 10,8003.0 m *19300 18250 *13800 11700 *11000 8200 *9300 6050 *6250 4600

10' *42,500 40,200 *30,400 25,800 *24,200 18,100 *20,500 13,300 *13,800 10,2001.5 m *21550 16900 *15250 10950 *11850 7800 9450 5800 *6850 4500

5' *47,500 37,300 *33,600 24,200 *26,100 17,200 20,800 12,800 *15,100 10,0000 m *21300 16350 *15900 10500 *12300 7500 9250 5650 7650 46000' *46,900 36,000 *35,100 23,200 *27,100 16,600 20,400 12,400 16,800 10,200

–1.5 m *10350 *10350 *13850 *13850 *21100 16200 *15750 10300 12200 7350 9150 5550 8200 4950–5' *22,800 *22,800 *30,600 *30,600 *46,500 35,800 *34,700 22,700 26,900 16,200 20,200 12,300 18,000 10,900

–3.0 m *15650 *15650 *20300 *20300 *19200 16350 *14650 10350 *11350 7350 *8650 5650–10' *34,500 *34,500 *44,700 *44,700 *42,300 36,100 *32,300 22,800 *25,000 16,200 *19,100 12,500

–4.6 m *20800 *20800 *16000 *16000 *12350 10550 *9200 7550 *8400 7100–15' *45,800 *45,800 *35,300 *35,300 *27,300 23,200 *20,300 16,600 *18,600 15,600

–6.1 m *10750 *10750 *7800 *7800 *7350 *7350–20' *23,700 *23,700 *17,200 *17,200 *16,200 *16,200

Arm: 4000 mm 13'1" Unit: kg lbA 1.5 m 5' 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' Maximum

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *5000 *5000

30' *11,100 *11,1007.6 m *7350 6600 *4850 *4850

25' *16,200 14,500 *10,600 *10,6006.1 m *7700 6500 *4800 *4800

20' *16,900 14,300 *10,600 *10,6004.6 m *9250 8700 *8200 6300 *6400 4600 *4950 4400

15' *20,400 19,200 *18,000 13,900 *14,100 10,200 *10,900 9,7003.0 m *17600 *17600 *12800 11850 *10300 8250 *8800 6000 7400 4500 *5250 4150

10' *38,800 *38,800 *28,300 26,100 *22,700 18,200 *19,400 13,300 16,300 9,900 *11,600 9,1001.5 m *20500 17150 *14500 11050 *11,300 7800 *9350 5750 7250 4350 *5700 4050

5' *45,300 37,800 *31,900 24,300 *24,900 17,200 *20,600 12,700 16,000 9,600 *12,600 8,9000 m *9100 *9100 *21700 16300 *15500 10450 *11950 7400 9150 5550 7100 4250 *6400 41000' *20,100 *20,100 *47,800 35,900 *34,100 23,100 *26,300 16,400 20,200 12,200 15,700 9,400 *14,100 9,000

–1.5 m *9300 *9300 *13250 *13250 *21400 16000 *15650 10150 12050 7200 9000 5400 7350 4350–5' *20,500 *20,500 *29,200 *29,200 *47,200 35,200 *34,500 22,400 26,500 15,900 19,900 11,900 16,200 9,600

–3.0 m *13700 *13700 *18350 *18350 *20000 16000 *14950 10100 *11600 7150 9000 5400 *8100 4900–10' *30,200 *30,200 *40,400 *40,400 *44,100 35,300 *33,000 22,200 *25,600 15,700 19,800 11,900 *17,900 10,800

–4.6 m *18750 *18750 *23750 *23750 *17400 16300 *13250 10200 *10100 7250 *8050 6000–15' *41,300 *41,300 *52,300 *52,300 *38,400 35,900 *29,200 22,500 *22,300 16,000 *17,800 13,200

–6.1 m *17100 *17100 *13100 *13100 *9900 *9900 *7600 *7600–20' *37,700 *37,700 *28,900 *28,900 *21,800 *21,800 *16,700 *16,700

Arm: 4800 mm 15'9" Unit: kg lbA 1.5 m 5' 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' Maximum

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *3800 *3800

30' *8,400 *8,4007.6 m *3750 *3750 *3650 *3650

25' *8,300 *8,300 *8,100 *8,1006.1 m *6900 6650 *6050 4850 *3650 *3650

20' *15,200 14,700 *13,300 10,700 *8,100 *8,1004.6 m *7450 6400 *6900 4700 *3750 *3750

15' *16,500 14,100 *15,200 10,400 *8,200 *8,2003.0 m *11550 *11550 *9500 8450 *8150 6100 *7300 4550 *3950 3550

10' *25,500 *25,500 *20,900 18,600 *18,000 13,500 *16,000 10,000 *8,700 7,9001.5 m *19000 17800 *13500 11300 *10600 7900 *8850 5800 7250 4350 *4250 3500

5' *41,900 39,300 *29,800 25,000 *23,400 17,500 *19,500 12,800 16,000 9,600 *9,400 7,7000 m *9550 *9550 *21050 16600 *14900 10600 *11500 7500 9150 5550 7100 4200 *4700 35500' *21,000 *21,000 *46,400 36,600 *32,900 23,400 *25,400 16,500 20,200 12,200 15,600 9,300 *10,400 7,800

–1.5 m *7800 *7800 *12150 *12150 *21600 16000 *15500 10150 *11950 7200 8950 5350 7000 4100 *5400 3700–5' *17,200 *17,200 *26,800 *26,800 *47,600 35,200 *34,200 22,400 *26,300 15,800 19,800 11,800 15,400 9,100 *11,900 8,200

–3.0 m *11400 *11400 *15950 *15950 *20850 15800 *15300 9950 *11800 7050 8850 5250 *6500 4100–10' *25,100 *25,100 *35,200 *35,200 *46,000 34,900 *33,800 22,000 *26,100 15,500 19,600 11,600 *14,400 9,100

–4.6 m *15450 *15450 *20950 *20950 *19000 15950 *14200 10000 *10900 7050 *8350 5300 *7400 4850–15' *34,100 *34,100 *46,200 *46,200 *41,800 35,200 *31,300 22,000 *24,100 15,500 *18,400 11,700 *16,300 10,700

–6.1 m *20,400 *20,400 *21650 *21650 *15650 *15650 *11800 10200 *8750 7250 *7200 6300–20' *45,000 *45,000 *47,700 *47,700 *34,500 *34,500 *26,000 22,500 *19,300 16,000 *15,900 13,900

–7.6 m *10050 *10050 *7100 *7100 *6300 *6300–25' *22,100 *22,100 *15,600 *15,600 *13,800 *13,800

Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping.

PC400LC-6HYDRAULIC EXCAVATOR

Page 16: XCAVATOR PC400LC-6 - Erb Equipment · XCAVATOR. 2 PC400LC-6 Hydraulic Excavator WWALKALK-A-AROUNDROUND High pressure hydraulic system helps provide fast cycle times. Komatsu distributors

STANDARD EQUIPMENT

● Air cleaner, double element● Air conditioner● Alternator, 50A● Auto warm-up● Auto deceleration● Batteries, 150 Ah/2 x 12V● Boom holding valve● Cab which includes: antenna, ashtray, cigarette lighter, floor mat,

front windshield washer, storage box, suspension seat, seat belt,and AM/FM radio

● Controls, wrist● Counterweight, 8890 kg 19,600 lb● Dust proof net for radiator● Electronic controller● Guard, fan● Heater/defroster● In-line filter● Light, one front, RH● Overheat prevention● Power max● Pump/engine room partition● Rear view mirror, RH and LH● Service valve, 1 standard● Shoes, 700 mm 28" triple grouser● Starting motor, 11 kW● Speed down system● Swing parking brake● Swing priority mode● Turbocharger cover● Track, guiding guard● Travel alarm● Vandalism protection provision tabs

OPTIONAL EQUIPMENT

● Arm holding valve● Cab front window guard● High altitude area spec● Hydraulic control unit (for breaker)● Service valve● Shoes

—600 mm 24" triple grouser—800 mm 31.5" triple grouser—900 mm 35.4" triple grouser

● Storage, hot/cold● Track roller guards, full length● Undercover● Variable gauge track frame● Boom assembly

—7000 mm 23'2" —7000 mm 23'2" with piping

● Arm assembly—2400 mm 7'10" —2900 mm 9'6" —2900 mm 9'6" with piping—3380 mm 11'1" —3380 mm 11'1" with piping—4000 mm 13'1" —4800 mm 15'9"

SOLD ONLY WITH BUCKET

● Lug bushing● Play adjustment mechanism

Komatsu America International Company440 N. Fairway Dr., Vernon Hills, IL 60061

AESS459-02 ©2002 Komatsu Printed in USA DK09(2.5M)EH DataKom 09/02 (EV-2)

www.KomatsuAmerica.com Materials and specifications are subject to change without noticeis a trademark of Komatsu Ltd. Japan