Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
XBA and TRB SERIES - Vacuum Packages
SIHI Pumps
www.sterlingamericas.com
SIHIPERFORMANCE AND RELIABILITY
Single Source ResponsibilityOne purchase order, One contact and One warranty.
Package Design Flexibility:The XBA package allows partial recirculation of theservice liquid, if required. The TRB package allowstotal recirculation of the service liquid, which reducesemissions and allows recovery of valuable products.
Availability:Standard design provides immediate availability ofdocumentation for your engineering evaluation, andrapid delivery often from stock.
Save Valuable Floor Space:Space requirements are minimized by compact design.
Ready for Installation:Reduce your installation costs, as well as yourdesign procurement costs. Buy the XBA or TRBSeries packages and receive the same quality andtesting as you have always known in SIHI liquidring vacuum pumps.
Safe Cool Operation:The safest compression of thermally sensitive, hazard-ous or explosive process gases is ensured by the coolcompression provided by liquid ring pumps.
Accepts Entrained Liquid and Vapor:The SIHI vacuum pumps in the XBA and TRBpackages handle carryover or condensable vaporsfrom your process.
Low Maintenance and Long Life:The XBA and TRB packages are simple and do notrequire special tooling to disassemble. The vacuumpumps have one moving part with no metal to metalcontact. The result is cost savings over the entirepackage life.
Low Vibration & Noise:Abscence of reciprocating parts assures quiet and lowvibration operation - eliminating the need for specialfoundations.
GasDischarge
TRB
Separator
HeatExchanger
Overflow
Cooling Liquid InCooling Liquid Out
www.sterlingamericas.com
GasDischarge
Gas SuctionLine
Overflow
SolenoidValve
Y-StrainerIsolationValve
ServiceLiquid SupplyConnection
Check Valve
XBA Separator
RecirculationValve
PartialRecirculation
Line
SIHILiquid Ring
Vacuum Pump
GasSuction
Line
SIHILiquid Ring
Vacuum Pump
IsolationValve
* V-belt drive units. All others are direct drive or closed coupled units.
1. Capacity in ACFM at inlet pressure at sea level for dry air at 20°C (68°F) using 15°C (59°F) wateras service liquid, with atmospheric discharge pressure.
2. Service liquid makeup flow rate based on 50% partial recirculation.
3. All dimensions and weights are approximate.
4. Data is subject to change without notice.
Dry Air Performance of SIHI MEDIUM Vacuum Units
*
*
*
*
*
*
*
*
*
*
*
*
Package
ModelPumpModel
SpeedRPM
MotorHP
Suction
DischargeSize (in.)
XBA
Shipping
Weight(lbs.)
LEM15 3500 ¾ 7.2 7.0 6.3 5.4 0.4 1.5 1 410 105
LEM20 3500 1 13.5 13.4 11.3 8.2 0.5 1.5 1 413 115
LEM40 3500 2 24 23 20.5 16.5 0.7 2.3 1¼ 422 135
LEM60 3500 3 37 37 35 30.5 0.7 2.3 1¼ 432 180
LEM110 1750 5 76 76 74 58 1.5 4.7 1½ 470 275
LEM170 1750 7.5 114 117 113 104 1.9 5.7 1½ 510 300
LEM250 1750 10 152 154 150 138 2.2 6.5 2 540 525
LEH360 1750 15 220 218 215 186 5 13 3 1400 1000
LEH460 1750 20 303 301 290 254 5 13 3 1500 1100
LEH560 1750 25 360 348 338 309 6 13 4 1700 1300
LEH760 1750 30 428 432 427 394 6 16 4 1800 1400
LEH860 1750 40 548 546 524 472 7 18 4 1900 1500
LPH20103 3500 2 14.7 13.8 11.3 --- 0.6 1.8 1¼ 527 227
LPH20105 3500 2 29.5 28 22 --- 0.6 1.8 1¼ 528 229
LPH20107 3500 3 34 31.7 23 --- 0.6 1.8 1¼ 565 265
LPH3404 1750 3 40 40 32 --- 1.7 6.0 1½ 872 372
LPH3408 1750 5 75 74 65 --- 1.7 6.0 1½ 917 417
LPH40412 1750 7.5 118 117 102 60 2.0 5.0 1½/2 909 509
LPH40517 1750 10 167 163 147 105 3.0 10.5 2 974 574
LPH50518 1750 15 248 240 217 184 3.0 13.5 2½ 1418 1018
LPH50523 1750 20 327 318 288 250 3.5 12.5 2½ 1530 1130
LPH60520 1750 25 362 352 322 267 3.5 12.0 4 1723 1323
LPH60527 1750 40 470 456 415 350 4.0 13.0 4 1975 1575
LPH70123 880 30 455 440 375 285 5.0 19.5 4 2970 2170
LPH70123 975 40 502 483 410 330 5.0 19.5 4 3010 2210
LPH70123 1030 40 540 520 440 330 5.0 19.5 4 3140 2340
LPH70123 1150 40 600 580 485 380 5.0 19.5 4 3140 2340
LPH70530 880 40 590 575 535 450 7.5 28.5 5/6 3410 2610
LPH70530 975 50 675 655 590 485 7.5 28.5 5/6 3480 2680
LPH70530 1030 50 720 690 625 520 7.5 28.5 5/6 3685 2885
LPH70530 1150 60 795 760 685 545 7.5 28.5 5/6 3862 3062
LPH70540 880 50 850 830 770 630 8.5 31.5 5/6 3600 2800
LPH70540 975 60 913 910 845 700 8.5 31.5 5/6 3795 2995
LPH70540 1030 60 985 980 910 770 8.5 31.5 5/6 3935 3135
LPH70540 1150 75 1120 1095 1000 825 8.5 31.5 5/6 4045 3243
LPH80557 575 75 1560 1500 1350 1100 11.5 40.5 8 7965 7165
LPH80557 680 100 1890 1820 1700 1410 11.5 40.5 8 8280 7480
LPH80557 735 125 2080 2015 1880 1580 11.5 40.5 8 8700 7900
16
ACFM
20
ACFM
24
ACFM
26
ACFM
Vacuum (in Hg.)
TRB/XBA 101
TRB/XBA 102
TRB/XBA 103
TRB/XBA 104
TRB/XBA 105
TRB/XBA 106
TRB/XBA 107
TRB/XBA 108
TRB/XBA 109
TRB/XBA 110
TRB/XBA 111
TRB/XBA 112
TRB/XBA 201
TRB/XBA 202
TRB/XBA 203
TRB/XBA 301
TRB/XBA 302
TRB/XBA 401
TRB/XBA 402
TRB/XBA 501
TRB/XBA 502
TRB/XBA 601
TRB/XBA 602
TRB/XBA 707-0880
TRB/XBA 707-0975
TRB/XBA 707-1030
TRB/XBA 701
TRB/XBA 708-0880
TRB/XBA 708-0975
TRB/XBA 708-1030
TRB/XBA 702
TRB/XBA 709-0880
TRB/XBA 709-0975
TRB/XBA 709-1030
TRB/XBA 703
TRB/XBA 801-0575
TRB/XBA 801-0680
TRB/XBA 801-0735
Note: Avg. Service liquid flow USGPM are in reference to XBA packages only.
Avg. Cooling water flows USGPM to the TRB heat exchangers may vary.
TRB
ShippingWeight
(lbs.)
Avg. XBAService
Liquid FlowUSGPM
Avg. TRBCooling
Water FlowsUSGPM
* V-belt drive units. All others are direct drive or closed coupled units.
1. Capacity in ACFM at inlet pressure at sea level for dry air at 20°C (68°F) using 15°C (59°F) wateras service liquid, with atmospheric discharge pressure.
2. Service liquid makeup flow rate based on 50% partial recirculation.
3. All dimensions and weights are approximate.
4. Data is subject to change without notice.
5. If requirements are in the range from atmospheric pressure to 20” Hg. Vac., a more efficient selectioncan be made from models listed on the preceding page.
Dry Air Performance of SIHI HIGHHIGHHIGHHIGHHIGH Vacuum Units
*
*
*
*
*
*
*
*
Pump
Model
Speed
RPM
Motor
HP
TRB/XBA 101
TRB/XBA 102
TRB/XBA 103
TRB/XBA 104
TRB/XBA 105
TRB/XBA 106
TRB/XBA 107
TRB/XBA 108
TRB/XBA 109
TRB/XBA 110
TRB/XBA 111
TRB/XBA 112
TRB/XBA 204
TRB/XBA 205
TRB/XBA 303
TRB/XBA 304
TRB/XBA 403
TRB/XBA 404
TRB/XBA 503
TRB/XBA 504
TRB/XBA 505
TRB/XBA 603
TRB/XBA 604
TRB/XBA 710-0880
TRB/XBA 710-0975
TRB/XBA 710-1030
TRB/XBA 704
TRB/XBA 711-0880
TRB/XBA 711-0975
TRB/XBA 711-1030
TRB/XBA 705
TRB/XBA 712-0880
TRB/XBA 712-0975
TRB/XBA 712-1030
TRB/XBA 706
Note: Avg. Service liquid flow USGPM are in reference to XBA packages only.Avg. Cooling water flows USGPM to the TRB heat exchangers may vary.
LEM15 3500 ¾ 7.0 5.8 4.0 --- 0.4 1.5 1 410 105
LEM20 3500 1 13.4 10.1 4.0 --- 0.5 1.5 1 413 115
LEM40 3500 2 23.0 18.5 8.0 --- 0.7 2.3 1¼ 422 135
LEM60 3500 3 37.0 32.3 23.0 8.0 0.7 2.3 1¼ 432 180
LEM110 1750 5 76 72.1 52.0 35.0 1.5 4.7 1½ 470 275
LEM170 1750 7.5 117 110 74.0 46.0 1.9 5.7 1½ 510 300
LEM250 1750 10 154 145 110 80 2.2 6.5 2 540 525
LEH360 1750 15 218 200 158 75.5 5 13 3 1400 1000
LEH460 1750 20 301 272 219 135 5 13 3 1500 1100
LEH560 1750 25 348 324 280 155 6 13 4 1700 1300
LEH760 1750 30 432 410 360 206 6 16 4 1800 1400
LEH860 1750 40 546 498 419 235 7 18 4 1900 1500
LPH25003 3500 2 14.9 14.5 11.0 --- 0.7 2.2 1¼ 532 232
LPH25007 3500 3 31.0 31.0 23.0 --- 0.7 2.2 1¼ 577 270
LPH3704 1750 5 37 42 29 17 2.2 7.5 1½ 846 446
LPH3708 1750 7.5 70 74 55 30 2.8 9.0 1½ 1078 578
LPH45312 1750 7.5 102 112 95 61 2.0 5.5 1½ 1033 533
LPH45317 1750 10 150 150 125 73 2.0 6.0 1½ 1051 555
LPH55312 1750 20 177 199 173 117 4.5 16.0 2 1544 1044
LPH55316 1750 20 228 248 210 122 5.5 19.0 2 1565 1065
LPH55320 1750 25 247 315 265 148 6.5 23.5 2 1680 1180
LPH65320 1750 30 330 345 305 210 4.5 14.5 2½ 1680 1280
LPH65327 1750 40 385 410 360 210 4.5 14.5 2½ 1885 1485
LPH75320 880 40 420 460 405 295 10.0 30 4/6 2900 2100
LPH75320 975 40 470 515 455 335 10.0 30 4/6 3120 2320
LPH75320 1030 50 485 535 470 335 10.0 30 4/6 3260 2460
LPH75320 1150 60 515 570 490 340 10.0 31.5 4/6 3787 2987
LPH75330 880 50 610 670 535 380 10.5 31.5 4/6 3275 2475
LPH75330 975 50 670 740 615 390 10.5 31.5 4/6 3570 2770
LPH75330 1030 60 700 770 630 395 10.5 31.5 4/6 3810 3010
LPH75330 1150 75 745 830 665 400 10.5 36 4/6 4254 3354
LPH75340 880 60 700 850 740 460 11 36 4/6 3850 3050
LPH75340 975 60 800 930 840 510 11 36 4/6 4045 3245
LPH75340 1030 75 835 955 860 525 11 36 4/6 4120 3320
LPH75340 1150 100 890 995 890 525 11 36 4/6 4918 4118
TRBShipping
Weight
(lbs.)
XBAShipping
Weight
(lbs.)
28
ACFM
28.9
ACFM
SuctionDischarge
Size (in.)
Avg. XBAService
Liquid FlowUSGPM
Avg. TRBCooling
Water FlowsUSGPM
*
Vacuum (in Hg.)
20
ACFM
25
ACFM
Package
Model
Benefits
Service liquid contained andseparated from clean coolantsupply
Low service liquid usage
Allows recovery of condensableinlet gases
TOTAL RECIRCULATION – TRBUsed where gases and liquids are toxicor hazardous, and when environmentalcontamination is a concern.
PARTIAL RECIRCULATION – XBAUsed where service liquid is available andcontamination problems are minimal.
Benefits
Simplicity
Low initial cost
Reduced service liquid consumption
Pump Suction
InletCheck Valve
CompoundGauge
IsolatingValve
RegulatingValve
Flow RegulatingValve Solenoid Valve
(normally closed)
Y - Strainer Isolating Valve
Service Liquid
PartialRecirculating
Piping
Overflow
Separator
System Vent
M
PI
S
Pump Suction
InletCheck Valve
IsolatingValve
CompoundGauge
FlowRegulating
Valve
Heat Exchanger
Coolant Supply
Coolant Return
Y- Strainer Isolating Valve
GaugeGlassM
PI
LI
Overflow
System Vent
Separator
ONCE THROUGH – XBA
Pump Suction
InletCheck Valve
CompoundGauge
IsolatingValve
Flow RegulatingValve Solenoid Valve
(normally closed)
Y - Strainer Isolating Valve
Service Liquid
To drain
Separator
PI
S
M
System Vent
Used where service liquid is plentiful andcontamination is not a problem.
Benefits
Simplicity
Lowest initial cost
SERVICE LIQUID ARRANGEMENTS
XBA & TRB Rev1.5 12-04