(AMP) (mm.)(VOLT)

X-PLUS B4.1

Model DimensionsV rangeACI min.NF I max.NF

MicroStepping

DriverType

(AMP) (AMP)(VOLT)

152x129x462.4 4.0110 to 230 +/- 15%

( )Peak value ( )Peak value

Step & Direction 3,200

(Step/Rev)

box

X-PLUS B4.1 Series DrivesNEW!

HIGHLIGHTS

Full digital microstepping drive.

Adaptive microstepping up to 3,200 step/rev.

Intelligent management of the current profile that achieves good results in terms of smoothness of movement, low noise and vibration control.

A highly sophisticated operation system, preserving anyhow the traditional ease of use of R.T.A. drives.

•••

•

INTRODUCTION

X-PLUS B4.1 is the name of the new bipolar microstep stepping motor drive with power input directly from the main AC supply (110 V to 230 V ), specifically AC AC

developed for applications sensitive to acoustic noise and vibration.

Target: advanced applications requiring high precision, low noise and smoothness of movement.

The perfect choice for high power and low acoustic noise.

•

•

•

ADAPTIVEMICROSTEPPING

X PLUS B4.1

TECHNICAL FEATURES

Range of operating voltage:

Range of current: 2.4-4 Amp. Easy setting of values by means of a dip-switch.

Microstepping: 400, 800, 1,600 and 3,200 steps/revolution. Setting by means of a dip- switch.

Automatic current reduction at motor standstill.

Management of the current profile setting by meansof a dip-switch.

Protections:

-Protection against under-voltage and over-voltage.-Protection against a short-circuit at motor outputs.-Overtemperature protection with thermal sensor.

Electronic damping facility for further acoustic noise and mechanic vibrations reduction.

Available in boxed version with plug-in connectors.Maximum compactness.

Optoinsulated inputs to ensure bestEM noise immunity.

External fans not needed.

Necessity to be coupled with stepping motors rated for high voltage and equivalent or bigger than NEMA 34.

Warranty: 24 months.

110-230 VAC.•••

••

•

••

**

AR NR TA Y

W

2YEARS

R.T.A. PRODUCTS STRENGTHS

Great reliability, highly recognized in the field.

Ease of use combined with great simplicity in the setup phase.

A track record of over 30 years in stepping drives production, with over 650,000 units sold in 39 countries worldwide.

Excellent pre and post sales support through qualified staff and strict corporate procedures.

••

•

•

R.T.A. Deutschland GmbHBublitzer Straße 3440599 DÜSSELDORF (Germany)Tel. +49.211.749.668.60 - Fax +49.211.749.668.66www.rta-deutschland.de

R.T.A. s.r.l.Via E. Mattei - Fraz. Divisa27020 MARCIGNAGO (PV) ITALYTel. +39.0382.929.855 - Fax +39.0382.929.150www.rta.it

R.T.A. IBERICA-Motion Control Systems S.L.C/Generalitat 22, 1° 3°08850 GAVA - BARCELONA (Spain)Tel. +34.936.388.805 - Fax +34.936.334.595www.rta-iberica.es

•

•

MECHANICAL DIMENSIONS

NEW!

MOTORS WITH RATING FOR HIGH VOLTAGE,

EQUIVALENT OR BIGGER THAN NEMA 34

X-PLUS B4.1 Series DrivesPOWER AND LOGIC CONNECTIONS

1

2

3

4

5

6

7

8

B

B -

A -

A

9

10

11

12

13

14

15

16

17

18

19

20

-

+

- C. OFF

+

- DIR.

+- STEP

+

- FAULT

+

- AUX 1

AUX 2+

POWER SUPPLYDIRECTLY

FROM THE MAIN110-230 VAC

••

12946

15

2

5

20 26

DIP-SWITCHDP1

1

C2

9

1

X-PLUS series

HV TER FAU

@

E INR FO OM

Alle

gato

al c

atal

ogo

CA

E -

04

- 10

Dimensions in millimeters - Not in scale.