Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
- 63
%+
400
%
LED-LIGHTTUBES T8/G5
Fluorescent tubes in different sizes and wattages are widely used for com-mercial lighting. Despite the fact that fluorescent tubes have advantages compared to incandescent bulbs there are also quite some drawbacks in this technology
Among others these are flickering light, limited on-off cyclesand of course build in high poisonous mercury.
ALPHARD LED-Lighttubes: Perfect replacement for fluorescent tubes
Advantages of LED
• Energy saving more than 60%
• Very long life
• High quality of light
• Contains no Mercury
• Less heat radiation
• No UV- or IR-Radiation
• No flicker, no noise
• Instand turn on
• Tolerant against cold temperatures
• dimmable versions available
Why chose ALPHARD LED-Tubes from L-E-D.COM ?Only the best product available ensures many years of operation without problems and best efficiency. ALPHARD Tubes have been sold for many years and are now state of the art with all major certifications worldwide. The range of products allows replacement of all current installations including dimmable applications.
• Included LED-starter for easy replacement!• Single side power input for safe installation• Special thermal pad back of PCB• Various endcaps to meet different applications• High amount of LED with no visible spots on tube• Meet LM-79 and EN62471-1 photoelectricity testing• Strong alu-housing for stability and cooling• Patented designed holes on PCB• High efficiency 0,06W SMD-Chips, up to 110lm/W• Pass 4000V Hi-pot and 1500V surge testing• Universal input from 90-277VAC• Certification: VDE TÜV KEMA-GS ETL CETL FCC PSE CE Rohs
Main advantage, as always when using LED, is a ma-jor reduction of energy costs and increased lifetime of product. Beyond that, ballast and starter is not used anymore which reduces costs for electricity and main-tenance even more.Color temperature (CCT) can be chosen from warm white (3000K) to cool white (>6000K) while offices mainly prefer LED-tubes with 5000K.
Internal driver
Removable endcaps
External driver
2012 SERIES
savings e.g. 150cm tube
€ -213.-
approx. Lifetime> 40.000h
Calculation: 40.000h approx. lifetime of product; Electricity price 0,14 €/kWh.Calculation only for reference, may differ if calculated individually. All subjects to change without notice.
WWW.L-E-D.COML-E-D.COM | [email protected] | 6072 LANS 209 | AUSTRIA | T: +43 512 378737
Modell 2X10 3X12 4X15 4X20 5X18 5X22 5X30
Length 590mm 900mm 1200mm 1200mm 1500mm 1500mm 1500mm
Power 10W 12W 15W 20W 18W 22W 30W
LED-amount (U/O) 168 192 264 360 300 408 528
Lumen (lm) clear 1050 1100 1700 2050 1850 2350 3000
Lumen (lm) milky 950 1000 1900 2200 2750
Lux@2m/5500K 82lx 102 137 181 148 186 253
Weight 210g 350g 440h 450g 450g 460g 470g
Comparable 25W 30W 40W 45W 45W 60W >60W
lm/W typ. 100lm/W
Housing D-TYPE Ø 26mm rund: typisch für Klarglasausführung
Housing U-TYPE Ø 28mm oval; typisch für Milchglasausführung
LED-driver D-TYPE: 16mA / U-TYPE: 18mA Constant Current
Input Voltage AC90-277V
Working Voltage DC36-40V
CCT WW: 2500-3000-3500-4000K , NW : 4000-4500-5000K , PW : 5000-5500K-6000K , CW : >6000K
Light decay Less than 10% after 10.000h
Angle D-TYPE 120° / U-TYPE 160° Milky
CRI Typ. > Ra70
Power Factor >0.95
Power Saving more than 60%
Life time (h) 30.000h - 50.000h
Working temp. -25°C - +55°C
Certification VDE TÜV KEMA-GS ETL CETL FCC PSE CE Rohs
Warranty 3 Years
T8
Length of G5-Modells correspond to original length of T5-fluorecent tubes, but diameter is identical to T8 versions!
Special tubes for ATM or double side tubes on request.
G5
LED-LIGHTTUBES T8/G5
NEW:
G5 endcaps available
as replacement for T5-tubes!
WWW.L-E-D.COML-E-D.COM | [email protected] | 6072 LANS 209 | AUSTRIA | T: +43 512 378737
������������������������������������������������
���������������
��������������������������������������������������������������������
��������������� ���������������������������� ���������������������
���������������������������������������������������������������������������������������
��������������������������������������������������������������
��������������������������������������������������������������������������
���������������������������������������������������������������������������������������������������
����������������������������������������������������������������������
����������������������������������������������������������
�����������������������������������������������������������������������������������
������������������������������������������������������������
�����������������������������������������������������
�����������������������������������������������������������������������������
����������������������������
���
���
��� ��� ��� ��� ��� ���
����������������������������
� �
�
���
���
���
���
���
���
���
���
�������������������������������������������������������������
LED-LIGHTTUBES T8/G5
Testchart ALPHARD T8 22W 5000K
n
T8
Anschlussbox Elektr. Vorschaltgerät
INSTALLATION MODELL T8 N
Information valid only for ALPHARD LED-tubes with internal driver for directconnection to 230VAC.
All maintenance works should be performed by qualified personnel only. Improper changes on fixtures and electricity cabling may cause serious injuries and damage of product which is not covered by warranty!
All mentioned tubes are connected to power on one side only, so other side is safe to touch.Actually all changes lead to an installation where the two pins on marked side of LED-tube are connected to lead and ground.
Fluorescent tubes with conventional ballast and starter - no rewiring!
Step 1:Switch off power!Remove fluorescent tube
Step 2:Remove starter Remove ballast for maximum saving and connect existing wire or leave it in place
Step 3:Install LED-Starter Install LED-TubeMark fixture as changed for LED!
Step 1:Switch off power!Remove fluorescent tube
Step 2:Remove ballastConnect cables like shown above Remove cabling to second socket
Step 3:Install LED-Tube with marked„Power-input„ side on socket with L/G Mark fixture as changed for LED!
Please carefully read all parts of this installation!Only use included LED-starter and mark fixture as rewired for LED-tube! All maintenance works should be performed by qualified personnel only.
In case of problems or questions please contact your supplier.
Direct connection
Replace starter with included LED-Starter and insert LED-tube with marked side to power side. If tubes doesn´t work install led-tube the other way round.For maximum power saving remove ballast.
Switch off power!Connect 2-pin L/G to side of tube marked „Power-input“Mark fixture as changed for LED!
Fluorescent tubes with electronic ballast
WWW.L-E-D.COML-E-D.COM . 6072 Lans 209 . Austria . +43 512 379620 . [email protected]