Upload
phamdang
View
218
Download
3
Embed Size (px)
Citation preview
Burlington Fire DepartmentOffice of the Fire Marshal
132 North AvenueBurlington, Vermont 05401
(802) [email protected]
Fire Pump Permit Application
Section A – Site Information Complete for All Permits
Name of Building/Site: Type Name of Building/SiteDPW – ISD Parent Building Permit Number:
Type Permit Number
Physical Location (911 Address): Type Number and Street NameName of Lessee (If Business) Type Name of LesseeBuilding Owner Name: Type Building Owner NameOwner Mailing Address: Type Number and Street Number Type Zip CodeOwner Contact (Phone and E-Mail): Type Phone Number Type Email
Section B – Fire Pump Project InformationThe fire pump will support - check all that are applicable:
☐ Class I or III Standpipe System ☐ Fire Sprinkler System☐ Shared between buildings in a complex ☐ Fire Hydrant System☐ Specialty Suppression System ☐ Other: Please Specify
Section C – Fire Pump Information
Manufacturer: Type Manufacturer Model: Type Model
GPM Type GPM @ Number PSI
Type:
☐ Diesel ☐ Electric
This application must be accompanied by the following:
Electric fire pumps must be accompanied with a letter from BED indicating service reliability as per NFPA 20. Manufacturer’s specifications and information for each type of system component being installed. Fire alarm system connections shall require separate DPW/FMO permits issued to a qualified fire alarm technician.
NOTE: The installer must also obtain a City of Burlington DPW Sprinkler permit and submit a copy with this permit application. All submittal documents are required prior to review and permitting.
*F O R O F FICE USE O NLY – DO N O T W RITE IN GREY * Firehouse # Permit # Received Date: Reviewer:
Check #
Check From:
Amount: DPW Permit #: BFD FMO Approval Date:
Burlington Fire Department Page 1 of 2 Fire Pump Permit Application
Section D – Contractor Information
Name of Installer: Type Name of Installer VT TQP Certification Number: Type Certification Number
Name of Designer: Type Name of Designer VT TQP / Engineer License: Type Engineer License
Section E – Project Valuation and Permit FeeComplete for all permits.
Make check payable to Burlington Fire Department and include with this application.
I, Type Name of Applicant Here certify that the total valuation of the construction work is as follows:
Fire Pump Permit FeesSystem Design Project Costs Fee Schedule Fee summation
NFPA 20 compliant fire pump and associated components
Enter Amount Cost X $ 0.007 Enter Amount
Permit amendment fee ($50 plus 1% of work cost increase)
Enter Amount $50 + (Cost increase X $ 0.01) Enter Amount
Sprinkler/Standpipe/Fire Alarm - requires separate permit application
SEPARATE PERMIT APPLICATION
Expedited permit fee (10 days to process per BCO 13-59(c)(8))(**Only if a stand-alone fire pump permit not associated with joint sprinkler permit)
$150 per hour(total cost determined by FMO based
on project complexity)
Enter Amount
Total Fee schedule total Enter Total
Applicant’s Company Name: Type Company Name
Contact Person: Type Contact Person Position: Type Position
Address: Type Address
Phone Number: Type Phone Number E-mail: Type E-Mail
Notes:
All Water based suppression system work requires DPW (BCO 8-23) and FMO permits and a witnessed acceptance test.
Some repair work may be eligible for consideration as a no-charge/repair permit. Contact BFD-FMO at: 802-864-5577.
Knox Box(es) and two sets (minimum) of all building master keys is/are required for all buildings equipped with a fire alarm and/or sprinkler system (BCO 13-60). Knox Boxes can be ordered online at www.knoxbox.com (3200 series with hinge or residential series - determined in consultation with FMO)
I hereby certify that the information contained within this application is correct and accurate.
Signature of Applicant: ____________________________ Date: _______________
Burlington Fire Department Page 2 of 2 Fire Pump Permit Application