Upload
leo-breton
View
59
Download
1
Embed Size (px)
Citation preview
Maximizing the Impact of PEMS in
Future Compliance Programs
Real World Emissions Technology Summit
West Virginia University
Leo Breton
Sept. 28, 2016
Outline
• Meaningful Routine Real-World
Compliance Testing’s Time Has Come
• ROVER PEMS Equipment Quality and
Accuracy is What Enabled Today’s Real
World Focus – Let’s Not Regress Now
• Qualified as the Pioneer of Real-World
Compliance Testing
Chassis Dynamometer Testing
Inventor Motivation for ROVER/PEMS
Engine Dynamometer Testing
Inventor Motivation for ROVER/PEMS
Lab testing was very abstract and expensive:
• Unrealistic speeds, unchanging pattern, trained
drivers and no traffic, 68-86F temp range,
exhaust aftertreatment cooling unrealistic,
simulated electronic signals, etc.
• Emissions systems tuned to the test
Yet provided the data for many EPA purposes:
• Emissions compliance, CAFÉ, emissions factors,
modeling, emissions system durability, reg.
writing what ifs?
But did lab testing reflect reality?
Inventor Motivation for ROVER/PEMS
Two EPA OTAQ camps of thought when asked:
1. Lab measurements were generally representative
of real world emissions
2. Even if there is a difference, the lab results
should be proportionate, i.e. as standards get
reduced over time, the percent reductions would
also occur in the real world
Real-world testing was not technically possible,
was not contemplated by regulations, and was
not thought to be necessary or useful by industry
or EPA
EPA Thinking Before ROVER/PEMS
Real-world testing not technically possible
• Can’t measure exhaust flow accurately
• Flow and concentration phasing changes with engine
speed and load makes it impossible
• Vehicle vibrations will wreak havoc with analyzers and
transducers
• Non-EPA organizations would be able to test vehicles
and declare non-compliance whether true or not
• Lab testing is effective
• We can simulate everything/anything in the lab
Real-world testing was not technically possible,
was not contemplated by regulations, and was
not thought to be necessary or useful by industry
or EPA
Industry Position on ROVER/PEMS Concept
Measure mass emissions and distance traveled of
any arbitrary engine/vehicle “blind,” i.e. based
on primary measurements without needing:
• Any vehicle information, e.g. make and model
• Any vehicle speed or other sensor signal
• ECM data stream or OBD port data
Optional Supplemental Diagnostic Data
• ECM data stream or OBD port data if desired
and available
• Enable diagnosing causes of emissions and fuel
economy issues seen with primary measurements
Inventor Goal: “Blind Testing” With Diagnostics
Regulatory compliance is serious business:
• Recalls cost OEM’s millions–don’t accuse
without certainty
• Findings could lead to lawsuits
• Testing must be technically correct and rigorous
Two parts to regs. for vehicle useful life:
1. Emit below numerical, mass-based standard
• Expensive laboratory equipment used
• Standard lab test cycle
2. Defeat devices are prohibited
• Supplemental information needed
Inventor Regulatory Compliance Mindset
Blind Testing Enabled by Inventing Flow Meter
Elimination of dilution tunnel by measuring, not
inferring exhaust flow rate
• Without depending on vehicle data stream
• “Blind Testing” knowing nothing proprietary
about vehicle
• Measure exhaust flow rate of moving vehicle
• Synchronizing exhaust flow rate and
concentration with changing speeds/loads
Instrumentation Size
• Portable gas analyzer with real-time comm.
Power requirement
• 12 volt equipment
Major Technical Problems Had to Be Overcome
No perceived need
• EPA ran FTPs
• Reducing standards without real-world feedback
was thought to be effective
• Industry opposition
No budget for “science projects” attitude
• Borrowed 5 gas analyzer from Snap-on
• Repurposed all other equipment except annubar
flow element
• Did most work in spare time
Major Structural Problems Had to Be Overcome
ROVER PEMS Demos and presentations • EPA Nat. Veh. Fuels and Emiss. Lab (NVFEL)
• Mobile Source Federal Advisory Committee (FACA) –
Mike Walsh, Chair
• Engine Manufacturers Association (EMA)
Loaned ROVERs for use: • NESCAUM, CARB, Moscow, Vermont
Loaned ROVERs for Correlation studies: • West Virginia University (WVU)
• Southwest Research Institute (SwRI)
• Aberdeen Proving Grounds (APG)
Featured prominently in DOJ investigations of
90’s
Getting the Word Out to Others
ROVER Connected to Tailpipe Flow Meter
Measured in Series With Lab System: single test on many
vehicles and many tests on single vehicle
Rigorous Laboratory Prove-Out Program
Assorted Applications – Light Duty
Assorted Applications – Power Plant Coal Pile
1998 Non-Road Testing
Assorted Applications - Lawnmower
Enabled Real-World Testing Programs
Remote Monitoring from Chase Vehicle
X-Country Marathon Testing
3 US and Numerous International Patents Issued
Courtesy of http://jpx.responsejp.com/jpx/images/2014/05/21/223656_1.jpg?fit=normal
ROVER Patents Licensed to Horiba Instruments
An Older Sensors, Inc. System
…and to Sensors, Inc.
Enabled VW Defeat Device Discovery Courtesy West Virginia University
ROVER Available Worldwide for Past 10 Years
Courtesy West Virginia University
Original ROVER to Commercial PEMS
Outline
• Meaningful Routine Real-World
Compliance Testing’s Time Has Come
• ROVER PEMS Equipment Quality and
Accuracy is What Enabled Today’s Real
World Focus – Let’s Not Regress Now
• Qualified as the Pioneer of Real-World
Compliance Testing
We Have Come a Long Way Since 1995
We now know that:
1. Lab testing is often not representative of real
world emissions/FE
2. Standards reductions may not translate to the
real world
3. Lax compliance checks creates an uneven
playing field and the need to cheat
But real-world testing is now technically possible
and is now performed routinely by many
We have come a long way since 1995
We have come a long way since 1995 1995 - Compliance Was Easy
• Road Testing Impossible
• No Equipment Available
• Off-Cycle Denial
• NAAQ Not Responding to OTAQ
Approach - Keep Reducing Numerical
Stds.
• Lab Based Compliance
1995-2008 – Compliance Became
Real
• Commercial ROVER PEMS Equipment
• Defeat Devices Don’t Pay
• Off-Cycle Emissions On Everyone’s
Radar
2008-2015? • Effect of Closed Compliance Lab
• Resigned from OTAQ
Calibration Space Dimensions
Throttle
Coolant Temp
Ambient Temp
Throttle Movement Baro Pressure
Load
Aux. Loads
Catalyst/Piston
Temps
Boost
Vehicle Speed
Engine Speed ?
John Hoard’s Views Following SAE
John Hoard’s Views Following SAE
John Hoard’s Views Following SAE
Petroleum Displacement (PD) Mission of VTO
• PD is a Real-world quantity with huge economic
and political significance
• Significant error in using lab results to quantify
• Drivetrain technology comparisons would likely
be very different if we had a real-world
comparison – unknown net effect
• PD accounting would be better with real-world
focus for all drivetrain technologies
Why Should Others Be Interested in PEMS?
• Simulations have no place in real-world testing
• Decide on goal first – robustness of emissions controls to:
– Aggressive driving?
– Ambient conditions?
– Age and use (durability)?
• Industry position in Europe suggests emissions from real driving more
aggressive than current lab cycle should be discounted
– Why is this different than lower temperature, pressure, altitude, wind
conditions, idle periods, etc? Because it is not intuitive to the public?
– What would we be left with? Lab data collected on the road??
• Real world testing for the sake of appearances is a loser – more
aggressive driving is a real world phenomenon like temperature and
pressure – most data should be included in final result without altering
• If adoption of an RDE does not cause an improvement in vehicle
technology and calibrations, the opportunity will have been
squandered.
A Bad RDE is Worse Than No RDE
Outline
• Meaningful Routine Real-World
Compliance Testing’s Time Has Come
• ROVER PEMS Equipment Quality and
Accuracy is What Enabled Today’s Real
World Focus – Let’s Not Regress Now
• Qualified as the Pioneer of Real-World
Compliance Testing
“Blind Testing” Concept Still Key
• Mass emissions accurately determined by actual
measurements of concentrations and exhaust flow rate
• Data stream data reserved for diagnostics or screening
• No information is needed from manufacturer
• The methodology is exactly the same for gas/diesel, all
manufacturers, turbo/non-turbo, and any size engine from
HDD to lawnmower.
• Relying on OBD or proprietary data is a slippery slope which
should be avoided.
• I fought the accuracy and quality battle while at OTAQ – let’s
not do it again or forfeit those gains
Future Cost / Quality Considerations
• Of course lower cost is always good, all else being equal
• PEMS is a low cost way of doing lab quality data acquisition
but standards are needed that drive up cost
• Don’t expect more defeat devices – too risky
• Most future uses will be for discerning smaller differences in
fuel economy/emissions or cycle differences – high quality is
still needed for what WE do
• Consider the OEM legal ramifications – your data will be used
by others for purposes you cannot control
• We fought the battle in the ’90s prevailed – make sure we
don’t regress…
Happy Testing!
Thank You!!