Wtb- Centrifugal Piump Opab1-h1326 Sur-V-00gb-1!74!001ifc r1 1

PROJECT NAME: SUR INDEPENDENT POWER PROJECT

PO DESCRIPTION: Water Treatment System PO NO.: OPAB1-H1326C-01 SUBJECT: Centrifugal Pump Vendor Specification

DOCUMENT NO.: SUR-V-00GB-1-74-001

For ConstructionOWNER

OWNERS ENGINEER

CONTRACTOR

SUB. CONTRACTOR

1 0 B ARev. No

10. Apr. 2012 7. Dec. 201126. DEC. 2011 23. NOV. 2011Date

Reviewed by MMH-DWH-0300 Reviewed by MMH-DWH-0300 For review First issueDescription

S.H.EUM S.H.EUM S.H.EUM S.H.EUMPrepared by

K.S.LEE K.S.LEE K.S.LEE K.S.LEEChecked by

N.S.KIM N.S.KIM N.S.KIM N.S.KIMReviewed by

B.Y.KIM B.Y.KIM B.Y.KIM B.Y.KIMApproved by

It may NOT be used, disclosed or reproduced for other purpose pertaining to this document or its contents without specific, written prior permission of Daewoo E&C Co., Ltd.

SUR INDEPENDENT POWER PLANT

DAEWOO E&C

Centrifugal Pump Vendor Specification

SUR-V-00GB-1-74-001

-CONTENTS0. PUMP EQUIPMENT LIST

1. SEA WATER BOOSTER PUMP A. PUMP DATA SHEET WITH PERFORMANCE CURVE B. MOTOR DATA SHEET WITH DWG 2. FILTER BACKWASH PUMP A. PUMP DATA SHEET WITH PERFORMANCE CURVE B. MOTOR DATA SHEET WITH DWG 3. SWRO SUPPLY PUMP A. PUMP DATA SHEET WITH PERFORMANCE CURVE B. MOTOR DATA SHEET WITH DWG 4. BWRO HIGH PRESSURE PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE B. MOTOR DATA SHEET WITH DWG 5. RO FLUSHING PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE B. MOTOR DATA SHEET WITH DWG 6. MBE FEED PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE B. MOTOR DATA SHEET WITH DWG 7. MBE REGENERATION PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE B. MOTOR DATA SHEET WITH DWG 8. POTABLE WATER PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE B. MOTOR DATA SHEET WITH DWG 9. CHEMICAL CLEANING PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE B. MOTOR DATA SHEET WITH DWG 10. H2SO4 TRANSFER PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE B. MOTOR DATA SHEET WITH DWG 11. NaOH TRANSFER PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE B. MOTOR DATA SHEET WITH DWG 12. WT BLDG SUMP PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE B. MOTOR DATA SHEET WITH DWG

SUR-V-00GB-1-74-001

rev. 1

0. PUMP EQUIPMENT LIST

PUMP EQUIPMENT LISTONWER NAME: HYORIM INDUSTRIES., Ltd PROJECT NAME: SUR IPP PROJECT - Water Treatment SystemQ No ITEM No. Service Name Q'ty PUMP TYPE H Power Casing A890 1B A890 1B A890 1B A743-CF3M A743-CF8M A743-CF8M A743-CF8M A743-CF8 A743-CF8M ALLOY-20 A743-CF8M A743-CF3M Material Impeller A890 1B A890 1B A890 1B A743-CF3M A743-CF8M A743-CF8M A743-CF8M A743-CF8 A743-CF8M ALLOY-20 A743-CF8M A743-CF3M Shaft A276-S31803 A276-S31803 A276-S31803 A276-316L A276-316 A276-316 A276-316 A276-304 A276-316 ALLOY-20 A276-316 A276-316L

2012.04.10 No. 11-769 Rev.1

(/hr) (/min)(Bar.g) (kW) (P)1 2 3 4 5 6 7 8 9 10 11 12 13 12 13 14 15 16 17 18 19 20 21 22 23 24 00GBB11/12/13 SEA WATER BOOSTER AP001 PUMPS 00GBP11/12 AP001 FILTER BACKWASH PUMP 3 2 3 2 2 2 2 2 2 2 2 2 DGP 2131 DGP 2531 DGP 2131 DMS 1512-4S DGP 2140 DGP 8640 DGP 6531 DGP 5431 DGP 2131 DGP 5425 DGP 5425 DVS 4X3-10 130 410 125 100 120 35 35 5 120 10 10 40 2.17 6.83 2.08 1.67 2.00 0.58 0.58 0.08 2.00 0.17 0.17 0.67 2.5 2.5 3.0 15.0 4.0 4.5 3.0 3.0 3.0 1.5 1.5 1.5 18.5 4 45 4

00GBF41/42/43 SWRO SUPPLY PUMPS AP001 00GBF31/32 AP001 00GBP21/22 AP001 00GCF51/52 AP001 00GCP41/42 AP001 00GKC11/12 AP001 00GBP31/32 AP001 00GBN13/14 AP001 00GBN33/34 AP001 00GBK11/12 AP001 BWRO HIGH PRESSURE PUMPS RO FLUSHING PUMPS MBE FEED PUMPS MBE REGENERATION PUMPS POTABLE WATER PUMPS CHEMICAL CLEANING PUMPS H2SO4 TRANSFER PUMP NaOH TRANSFER PUMP WT BLDG SUMP PUMPS

18.5 4 90 30 15 11 5.5 4 4 4 4 4

18.5 4 3.7 3.7 5.5 4 4 4

PUMP TOTAL 26 SETS

1. SEA WATER BOOSTER PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE & DRAWING B. MOTOR DATA SHEET WITH DWG

DATA SHEET OF PUMP1 Customer 3 Location 4 Item No. 5 Service 6 Installation 7 8 Liquid 9 Capacity 10 11 12 13 14 15 16 Nozzle 17 18 Casing 19 Impeller 20 Bed Plate 21 Coupling 22 Transmission 23 Rotation 24 BRG. No. 25 Lubricant 26 Tapped 27 Opening 28 Shaft Seal 29 30

For ProposalDate

For ReviewChek by

For FinalApp. By

HYORIM INDUSTRIES., Ltd Sur, Oman 00GBB11/12/13 AP001 SEA WATER BOOSTER PUMPS Indoor Outdoor Quantity OPERATION CONDITION SEA WATER130 m /hr 2.17 m /min T.Head3 3

Made by

2 PJT Name SUR IPP PROJECT - Water Treatment System

2012.04.10 Heo, S. B. Choi, S. G. Shin, K. J.

Pump Model Pump Type 3 Sets Driver

DGP 2131Horizontal Centrifugal Pump Motor PERFORMANCE Engine 62 %

Speed25 m NPSHreq'd2 2 2

1475 RPM 2

Des. Effic.

P r e s s

Diff. Dis. Suc. Vap.

2.50 2.50 0 0

kg/cm g P.Temp kg/cm g Sp. Gr. kg/cm g Visco. kg/cm2A NPSHav Bore Rating

55 1 1~2 Min. 3

Performance cp m Hydro Test NPSHreq'd

m B.H.P SHOP TEST Witness Witness

14.2 kW

Non WT. Non WT.

5

kg/g

PUMP CONSTRUCTION Type F.F F.F Position Casing / Impeller END TOP Radial 1 (One) Supplier by Type R. Output Thrust Oil (Oil bath) Drain PT 1/2" PT 1/4" Anchor B/N Com.Flange Press Gauge Drawing No. Paint Color WEIGHT (Approx.) 5310 x 1 Voltage Spacer (Rotaion viewed from driver) 6310 1 Shaft Sleeve Bed, Baseplate Suc. Dis. Mount Type5"(DN125) ANSI #150 4"(DN100) ANSI #150

Non WT. Witness MATERIAL A890 1B / A890 1B A276-S31803 A276-S31803 A36 ELECTRIC MOTOR DUK JI TEFC18.5kW (25HP)

Foot Close

Split Stage No (Bare Pump)

Common Flexible Direct C.W Radial Grease Vent N/A Model & Size

Mfr. Pro.Grade Ins. Class

HHI IP54 B BYes

Pole / rpm 4 P / 1475 F FNo

Phase, Frq. 3 50 Hz 415

V Tem. Rise STANDARD ACCESSORIESYes Yes Yes Yes No Coup. Set No Material No Material No

Gauge Conn. Coup. Cover

A36 (H.D.G)

SGL. RO 50I45__VV (HAST-C+SiC,Oring:Viton)

M./Seal Material Packing Mfr. No.2 Inlet No Outlet Inlet

K.S.M No.11 No.32 Press. Q'ty Press. No.54 kg/ /min kg/ /min

Outline DWG.

COD08336 No.1

31 Sealing 32 Plan 33

Sectional DWG. CAD01641B M1 RAL 9002 (Total 240 ) Pump Base 110 kg 49 kg REMARKS Motor Total 437 177 kg 336 kg kg

Yes

34 Cooling 35 Plan 36 37 38 39 40 41 42 43 DUK JI INDUSTRIAL CO.,LTD

OPERATING WEIGHT

Yes

No Outlet Q'ty SPARE PARTS LIST

DUK JI INDUSTRIAL CO.,LTD

Tel. +82-31-492-3701 Fax. +82-31-492-3704 A4 (210 x 297 mm)

ESTIMATED PERFORMANCE CURVECustomer PJT Name Item No. Pump Pump Model DGP 2131 Pump Nozzle5"(DN125) x 4"(DN100)

Made by Heo, S. B. Date

Chk. by Choi, S. G.

App. by Shin, K. J.

HYORIM INDUSTRIES., Ltd SUR IPP PROJECT - Water Treatment System 00GBB11/12/13 AP001 Q'TY 3 Service Name Motor Speed 1475 rpm Type TEFC

2012.04.10

SEA WATER BOOSTER PUMPS

Power18.5kW (25HP)

Pole 4

Voltage 415 V

Freq. 50 Hz

Pha. 3

Pump Operating Condition & Performance Capacity 2.17 m3/min T.Head 25 m Efficiency 62 % S.G. 1 Temp. 55 Visco. 1~2 cp BHP 14.2 kW Vibration Noise Max.56 Max.85 dB

SEA 035 WATER BOOSTER PUMPS030 TOTAL HEAD (m) 025

HEAD(m)020 015 010 005 000 0.00 100 090 080 070

0.50

1.00

1.50

2.00

2.50

3.00

3.50

EFFICIENCY (%)

060 050 040 030 020 010 000 0.00

EFFI.(%)

0.50

1.00

1.50

2.00

2.50

3.00

3.50

020 POWER (kW) 015 010 005 000 0.00 BHP (kW)

0.50

1.00

1.50 2.00 3 CAPACITY (m /min)

2.50

3.00

3.50

DUK JI INDUSTRIAL CO.,LTDDUKJI INDUSTRIAL CO.,LTD

Tel. +82-31-492-3701 Fax. +82-31-492-3704A4 (210 x 297 mm)

AC INDUCTION MOTOR DATA SHEETModel No.or RFQ No. 1 Item No. 00GBB11/12/13 AP001 Rev. No. [ ] Project Name SUR IPP 3 Project No. Quantity sets GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 180M Rated Output 18.5 kW 25 HP Type HLS-XSD Number of Poles 4 single Enclosure(Protection) Totally Enclosed ( IP54 Rotor Type Squirrel Cage ) Method of Cooling IC411(FC) Starting Method* D.O.L Y50 Hz Rated Voltage 415 V 400 V 415 V Rated Frequency Number of Phases 3 32.8 A 34.1 A 32.8 A Current Full Load Insulation Class 700 % 700 % 700 % F B H Locked-rotor** Temp. Rise at full load (by resistance method) Efficiency at 1.0 S.F 65 50% Load 90.5 % single deg. C (Class B) Motor Location Indoor Outdoor 75% Load 92.4 % single Altitude 1000 meter 100% Load 92.2 % Less than single Relative Humidity 80 % Power Factor(p.u) Less than Ambient Temp. 55 deg. C (Max.) 50% Load 0.725 single Duty Type Continuos ( S1 ) 75% Load 0.800 single 1.1 100% Load 0.850 Service Factor single 1475 r.p.m single Mounting B3 B5 V1 B3/B5 Speed at Full Load Torque Type Anti-Friction Full Load 12.2 kgm single Bearing DE/N-DE 6310ZC3 / 6310ZC3 Locked-rotor** 160 % Lubricant Grease(Gadus S2 V 100 2) single Breakdown** 220 % External Thrust Not applicable single Coupling Method Direct V-Belt Moment of Inertia (J) Load(Max.) 15.125 kgm2 Shaft Extension Single Double 0.166 kgm2 Motor Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor) 75 dB(A) Location Refer to Outline Drawing 2.2 mm/sec (r.m.s) Application Vibration Cold 3 times Area classification Non-Hazardous Permissible number of Hot 2 times Not applicable consecutive starts Type of Ex-Protection RAL9002 Applicable Standard Paint Munsell No. IEC ACCESSORIES SUBMITTAL DRAWING *.Sun Shield Outline Dimension Drawing \ Motor Weight(Approx.) 177 B3 227B2000AB07 kg

Main T-Box Ass'y Performance Curve Thermal limit Curve

227B8008LB2 P-1401418-7 TL-1401418-7

SPARE PARTS

REMARK

High Efficiency

Date 2010-10-12

DSND E.S.KIM

CHKD S. J. RA

CHKD O. J. KIM

APPD J. H. KIM

Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as a percentage of full-load value.

HHI W230-131-1

* In case of Inverter or V.V.V.F Motor:Performance data is based on sine wave tests.

A4(210mm X 297mm)

P-1401418-7 TL-1401418-7

HLS-XSD 15.1

SPEED VS TORQUE & CURRENT CURVE 350 300 250 TORQUE IN % 200 150 100 50 0 0 10 20 30 40 50 SPEED IN % 60 70 80 90 100 B D A C 800 700 600 500 400 300 200 100 0 CURRENT IN % CURRENT IN %

OUTPUT VS EFF., P.F & CURRENT CURVE 100 90 80 EFF. & P.F IN % 70 60 50 40 30 20 10 0 0 25 50 LOAD IN % 75 100 125 CURRENT P.F EFF 200 180 160 140 120 100 80 60 40 20 0

THERMAL LIMIT & TIME CURRENT CURVETYPE : RATED TORQUE : J OF MOTOR : J OF LOAD(Max.) : HLS-XSD 12.20 Kg.m 0.166 Kg.m2 15.1 Kg.m2 RATED SPEED VOLTAGE RATED CURRENT 415 V 32.8 A 25 HP

TL-1401418-7 4 P 1475 V A 50 HZ RPM V A

B A MTIME IN SEC.

C

Ist (P.U) NOTE A: THERMAL LIMIT CURVE AT HOT CONDITION B: THERMAL LIMIT CURVE AT COLD CONDITION C: CURRENT/TIME CURVE AT RATED VOLTAGE STARTINGREV. CONTENSFOR CONSTRUCTION

REMARKS

DATE

DSND BY

CHKD BYHWANG I.K.

APPD BY

10

12.03.22

E.S.KIM

K.J.KANG

FOR APPROVAL 11.12.29 E.S.KIM HWANG I.K. K.J.KANG

1

1

For Construction

1

2. FILTER BACKWASH PUMP A. PUMP DATA SHEET WITH PERFORMANCE CURVE & DRAWING B. MOTOR DATA SHEET WITH DWG


For ProposalDate

For ReviewChek by

For FinalApp. By

HYORIM INDUSTRIES., Ltd Sur, Oman 00GBP11/12 AP001 FILTER BACKWASH PUMP Indoor Outdoor Quantity OPERATION CONDITION FILTERED SEA WATER410 m /hr 6.83 m /min T.Head3 3

Made by





Speed25 m NPSHreq'd

1480 RPM 3.5

Des. Effic.

P r e s s


2.50 2.50 0 0

kg/cm g P.Temp kg/cm g Sp. Gr. kg/cm g Visco. kg/cm2A NPSHav Bore Rating2 2

2

55 1 1~2 Min. 5



38.7 kW

Non WT. Non WT.

5

kg/g

PUMP CONSTRUCTION Type F.F F.F Position Casing / Impeller END TOP Radial 1 (One) Supplier by Type R. Output Thrust Oil (Oil bath) Drain PT 1/2" PT 1/4" Anchor B/N Com.Flange Press Gauge Drawing No. Paint Color WEIGHT (Approx.) 6314 2 Voltage Spacer (Rotaion viewed from driver) 6314 1 Shaft Sleeve Bed, Baseplate Suc. Dis. Mount Type8"(DN200) ANSI #150 6"(DN150) ANSI #150

Non WT. Witness MATERIAL A890 1B / A890 1B A276-S31803 A276-S31803 A36 ELECTRIC MOTOR DUK JI TEFC Mfr. Pro.Grade Ins. Class HHI IP54 B BYes

Foot Close



45kW (60HP) Pole / rpm 4 P / 1480


F FNo



A36 (H.D.G)




Outline DWG.

COD08343 No.1



Yes


OPERATING WEIGHT

Yes



Tel. +82-31-492-3701 Fax. +82-31-492-3704 A4 (210 x 297 mm)



Chk. by Choi, S. G.

App. by Shin, K. J.

HYORIM INDUSTRIES., Ltd SUR IPP PROJECT - Water Treatment System 00GBP11/12 AP001 Q'TY 2 Service Name Motor Speed 1480 rpm Type TEFC

2012.04.10

FILTER BACKWASH PUMP

Power45kW (60HP)

Pole 4

Voltage 415 V

Freq. 50 Hz

Pha. 3

Pump Operating Condition & Performance Capacity 6.83035 030 TOTAL HEAD (m) 025 020 015 010 005 000 0.00 100 090 080 070 EFFICIENCY (%) 060 050 040 030 020 010 000 0.00 EFFI.(%)

T.Head 25 m

Efficiency 72 %

S.G. 1

Temp. 55

Visco. 1~2 cp

BHP 38.7 kW

Vibration

Noise

m3/min

Max.56 Max.85 dB

HEAD(m)

2.00

4.00

6.00

8.00

10.00

12.00

2.00

4.00

6.00

8.00

10.00

12.00

050 POWER (kW) 040 030 020 010 000 0.00 2.00 4.00 6.00 3 CAPACITY (m /min) 8.00 10.00 12.00 BHP (kW)


Tel. +82-31-492-3701 Fax. +82-31-492-3704A4 (210 x 297 mm)

AC INDUCTION MOTOR DATA SHEETModel No.or RFQ No. 0 00GBP11/12 AP001 Item No. Rev. No. [ 1 ] SUR IPP 2 Project Name Project No 1-401-495-003 Quantity 2 sets G GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 45 kW 225S Rated Output 60 HP sin Type HS Number of Poles 4 sin (IP 54) Squirrel Cage Enclosure(Protection) Totally Enclosed Rotor Type (IPW 54) Method of Cooling IC411(FC) Starting Method* D.O.L Y415 V Rated Frequency 50 Hz Rated Voltage Number of Phases 3 80.5 A Current Full Load Insulation Class 600 % F B H Locked-rotor** Temp. Rise at full load (by resistance method) Efficiency at 1.0 S.F 65 deg. C (Class B) 50% Load 92.2 % sin Motor Location Indoor Outdoor 93.2 % 75% Load sin Altitude 100% Load 93.1 % Less than 1000 meter sin Relative Humidity Power Factor(p.u) Less than 80 % Ambient Temp. 55 deg. C 0.727 50% Load (Max.) sin Duty Type 75% Load 0.804 Continuous (S1) sin Service Factor 1.1 100% Load 0.835 sin 1480 r.p.m sin Speed at Full Load Mounting B3 B5 V1 B3/B5 Torque Type Anti-Friction Full Load 29.6 kgm sin Bearing DE/N-DE 6314C3 / 6213C3 150 % Locked-rotor** Lubricant Grease(Gadus S2 V 100 2) sin 210 % Breakdown** External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) 2 Load 0.16- kgm Shaft Extension Single Double Motor 0.950 kgm2 Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level ( (No-load & mean value at 1m from motor) ) 80 dB(A) Location Refer to Outline Drawing 2.2 mm/sec (r.m.s) Application Vibration 3 times Area classification Non-Hazardous Permissible number of Cold Hot 2 times Type of Ex-Protection Not applicable consecutive starts 9002 Applicable Standard IEC or Equivalent Paint Munsell No. RAL 4.0PB5.4/5.5 ACCESSORIES GG SUBMITTAL DRAWING *. Space Heater(1ph. 240V, 120W) : 1EA/Motor Outline Dimension Drawing \ Motor Weight(Approx.) 350 kg *. Sun Shield B3 O-1401495-3 Main T-Box Ass'y 3M-024626 Performance Curve P-1401495-3 Thermal limit Curve T-1401495-3

SPARE PARTS

REMARK

High Efficiency

Date 2011-11-29

DSND J.S.KIM

CHKD

CHKD

APPD K.J.KANG


HHI W230-131-1

A4(210mm X 297mm)

HS

0.16

SPEED VS TORQUE & CURRENT CURVE 350 300 250 TORQUE IN % 200 150 100 50 0 0 10 20 30 40 50 SPEED IN % 60 70 80 90 B D C 700 600 500 400 300 200 100 0 100

A

OUTPUT VS EFF., P.F & CURRENT CURVE 100 90 80 EFF. & P.F IN % 70 60 50 40 30 20 10 0 0 25 50 LOAD IN % 75 100 CURRENT P.F EFF 200 180 160 CURRENT IN % 140 120 100 80 60 40 20 0 125

CURRENT IN %

HYUNDAIHEAVY INDUSTRIES CO., LTD

CURVE NO. T-1401495-3

TYPE : FULL LOAD TORQUE : J OF MOTOR : J OF LOAD :

HS29.6 0.950 0.16 kg.m kg.m2 kg.m2 RATED

45 kWSPEED : VOLTAGE RATED CURRENT

4P415 V 80.5A

50 Hz 1480 rpm

3

TIME IN SEC. T

B A

D

C

CURRENT IN p.u. A: THERMAL LIMIT CURVE AT HOT CONDITION B: THERMAL LIMIT CURVE AT COLD CONDITION C: TIME VS. CURRENT CURVE AT RATED VOLTAGE STARTING D: TIME VS. CURRENT CURVE AT 80% OF RATED VOLTAGE STARTINGSTARTING TIME at rated voltage starting at 80% of rated voltage starting SAFE STALL TIME 31 sec. at Hot condition 39 sec. at Cold condition

1.5 sec. 2 sec.

REMARKOnly Calculated value

REV. DATE 2 1 2011-12-21 0 09 09.12.08 12 08

CONTENTS For approval For F approval l

DSN J.S. KIM J J.S. S KIM

CHK

APPD K.J.KANG K J KANG K.J.KANG

RM-P251-133

A4(210mm x 297mm)

IEC

1

B152 A108-1075

A108-1075 A108-1045 A53 Gr.B 15A A36 B152 A108-1075 A108-1045 A36

A48-CL20A48-CL20

3. SWRO SUPPLY PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE & DRAWING B. MOTOR DATA SHEET WITH DWG


For ProposalDate

For ReviewChek by

For FinalApp. By

HYORIM INDUSTRIES., Ltd Sur, Oman 00GBF41/42/43 AP001 SWRO SUPPLY PUMPS Indoor Outdoor Quantity OPERATION CONDITION FILTERED SEA WATER125 m /hr 2.08 m /min T.Head3 3

Made by





Speed30 m NPSHreq'd

1475 RPM 2

Des. Effic.

P r e s s


3.00 3.00 0 0


2

55 1 1~2 Min. 3



15.7 kW

Non WT. Non WT.

6

kg/g

PUMP CONSTRUCTION Type F.F F.F Position Casing / Impeller END TOP Radial 1 (One) Supplier by Type R. Output Thrust Oil (Oil bath) Drain PT 1/2" PT 1/4" Anchor B/N Com.Flange Press Gauge Drawing No. Paint Color WEIGHT (Approx.) 5310 x 1 Voltage Spacer (Rotaion viewed from driver) 6310 1 Shaft Sleeve Bed, Baseplate Suc. Dis. Mount Type5"(DN125) ANSI #150 4"(DN100) ANSI #150

Non WT. Witness MATERIAL A890 1B / A890 1B A276-S31803 A276-S31803 A36 ELECTRIC MOTOR DUK JI TEFC18.5kW (25HP)

Foot Close




HHI IP54 B BYes





A36 (H.D.G)




Outline DWG.

COD08336 No.1



Yes


OPERATING WEIGHT

Yes



Tel. +82-31-492-3701 Fax. +82-31-492-3704 A4 (210 x 297 mm)



Chk. by Choi, S. G.

App. by Shin, K. J.

HYORIM INDUSTRIES., Ltd SUR IPP PROJECT - Water Treatment System 00GBF41/42/43 AP001 Q'TY 3 Service Name Motor Speed 1475 rpm Type TEFC

2012.04.10

SWRO SUPPLY PUMPS

Power18.5kW (25HP)

Pole 4

Voltage 415 V

Freq. 50 Hz

Pha. 3

Pump Operating Condition & Performance Capacity 2.08040 035 TOTAL HEAD (m) 030 025 020 015 010 005 000 0.00 100 090 080 070 EFFICIENCY (%) EFFI.(%) 060 050 040 030 020 010 000 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50

T.Head 30 m

Efficiency 65 %

S.G. 1

Temp. 55

Visco. 1~2 cp

BHP 15.7 kW

Vibration

Noise

m3/min

Max.56 Max.85 dB

HEAD(m)

0.50

1.00

1.50

2.00

2.50

3.00

3.50

020 POWER (kW) 015 010 005 000 0.00 BHP (kW)

0.50

1.00


2.50

3.00

3.50


Tel. +82-31-492-3701 Fax. +82-31-492-3704A4 (210 x 297 mm)

AC INDUCTION MOTOR DATA SHEETModel No.or RFQ No. 1 Item No. 00GBF41/42/43 AP001 Rev. No. [ ] Project Name SUR IPP 3 Project No. Quantity sets GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 180M Rated Output 18.5 kW 25 HP Type HLS-XSD Number of Poles 4 single Enclosure(Protection) Totally Enclosed ( IP54 Rotor Type Squirrel Cage ) Method of Cooling IC411(FC) Starting Method* D.O.L Y50 Hz Rated Voltage 415 V 400 V 415 V Rated Frequency Number of Phases 3 32.8 A 34.1 A 32.8 A Current Full Load Insulation Class 700 % 700 % 700 % F B H Locked-rotor** Temp. Rise at full load (by resistance method) Efficiency at 1.0 S.F 65 50% Load 90.5 % single deg. C (Class B) Motor Location Indoor Outdoor 75% Load 92.4 % single Altitude 1000 meter 100% Load 92.2 % Less than single Relative Humidity 80 % Power Factor(p.u) Less than Ambient Temp. 55 deg. C (Max.) 50% Load 0.725 single Duty Type Continuos ( S1 ) 75% Load 0.800 single 1.1 100% Load 0.850 Service Factor single 1475 r.p.m single Mounting B3 B5 V1 B3/B5 Speed at Full Load Torque Type Anti-Friction Full Load 12.2 kgm single Bearing DE/N-DE 6310ZC3 / 6310ZC3 Locked-rotor** 160 % Lubricant Grease(Gadus S2 V 100 2) single Breakdown** 220 % External Thrust Not applicable single Coupling Method Direct V-Belt Moment of Inertia (J) Load(Max.) 15.125 kgm2 Shaft Extension Single Double 0.166 kgm2 Motor Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor) 75 dB(A) Location Refer to Outline Drawing 2.2 mm/sec (r.m.s) Application Vibration Cold 3 times Area classification Non-Hazardous Permissible number of Hot 2 times Not applicable consecutive starts Type of Ex-Protection RAL9002 Applicable Standard Paint Munsell No. IEC ACCESSORIES SUBMITTAL DRAWING *.Sun Shield Outline Dimension Drawing \ Motor Weight(Approx.) 177 B3 227B2000AB07 kg


227B8008LB2 P-1401418-7 TL-1401418-7

SPARE PARTS

REMARK

High Efficiency

Date 2010-10-12

DSND E.S.KIM

CHKD S. J. RA

CHKD O. J. KIM

APPD J. H. KIM


HHI W230-131-1


A4(210mm X 297mm)

P-1401418-7 TL-1401418-7

HLS-XSD 15.1




TL-1401418-7 4 P 1475 V A 50 HZ RPM V A

B A MTIME IN SEC.

C


REMARKS

DATE

DSND BY

CHKD BYHWANG I.K.

APPD BY

10

12.03.22

E.S.KIM

K.J.KANG


1

1

For Construction

1

4. BWRO HIGH PRESSURE PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE & DRAWING B. MOTOR DATA SHEET WITH DWG


For ProposalDate

For ReviewChek by

For FinalApp. By

HYORIM INDUSTRIES., Ltd Sur, Oman 00GBF31/32 AP001 BWRO HIGH PRESSURE PUMPS Indoor Outdoor Quantity OPERATION CONDITION SWRO TREATED WATER100 m /hr 1.67 m /min T.Head3 3

Made by




DMS 1512-4SHorizontal Centrifugal Pump Motor PERFORMANCE Engine 52 %

Speed150 m NPSHreq'd

1485 RPM 3

Des. Effic.

P r e s s


15.00 15.00 0 0


2

55 1 1~2 Min. 5



78.4 kW

Non WT. Non WT.

24 kg/g

PUMP CONSTRUCTION Type R.F R.F Position Casing / Impeller SIDE TOP Radial 1 (One) Supplier by Type R. Output 7310 DF Voltage Spacer (Rotaion viewed from driver)NU310 EKC3 Thrust

Non WT. Witness MATERIAL A743-CF3M / A743-CF3M A276-316L A276-316L A36 ELECTRIC MOTOR DUK JI TEFC Mfr. Pro.Grade Ins. Class HHI IP54 B BYes

Suc. Dis. Mount Type

6"(DN150) ANSI #150 5"(DN125) ANSI #300

Shaft Sleeve Bed, Baseplate

Foot Close


Common Flexible Direct C.W Radial Vent PT1/2" Model & Size Grease

90kW (120HP) Pole / rpm 4 P / 1485


F FNo

Oil (Oil bath) Drain PT1/2" N/A Anchor B/N


Gauge Conn. Coup. Cover Com.Flange Press Gauge Drawing No. Paint Color WEIGHT (Approx.)

A36 (H.D.G)

SGL. PTO 65 X 70I45__VV (HAST-C+SiC,Oring:Viton)



Outline DWG.

COD09486


Sectional DWG. CAD01903 RAL 9002 (Total 240 ) Pump Base 530 kg 180 kg REMARKS Motor Total 1820 690 kg 1400 kg kg

Yes


OPERATING WEIGHT

Yes



Tel. +82-31-492-3701 Fax. +82-31-492-3704 A4 (210 x 297 mm)

ESTIMATED PERFORMANCE CURVECustomer PJT Name Item No. Pump Pump Model DMS 1512-4S Pump Nozzle6"(DN150) x 5"(DN125)


Chk. by Choi, S. G.

App. by Shin, K. J.

HYORIM INDUSTRIES., Ltd SUR IPP PROJECT - Water Treatment System 00GBF31/32 AP001 Q'TY 2 Service Name Motor Speed 1485 rpm Type TEFC

2012.04.10

BWRO HIGH PRESSURE PUMPS

Power90kW (120HP)

Pole 4

Voltage 415 V

Freq. 50 Hz

Pha. 3

Pump Operating Condition & Performance Capacity 1.67180 160 TOTAL HEAD (m) 140 120 100 080 060 040 020 000 0.00 100 090 080 070 EFFICIENCY (%) 060 050 040 030 020 010 000 0.00 EFFI.(%) 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00

T.Head 150 m

Efficiency 52 %

S.G. 1

Temp. 55

Visco. 1~2 cp

BHP 78.4 kW

Vibration

Noise

m3/min

Max.56 Max.85 dB

HEAD(m)

0.50

1.00

1.50

2.00

2.50

3.00

3.50

4.00

100 POWER (kW) 080 060 040 020 000 0.00 0.50 1.00 1.50 2.00 2.50 3 CAPACITY (m /min) 3.00 3.50 4.00 BHP (kW)


Tel. +82-31-492-3701 Fax. +82-31-492-3704A4 (210 x 297 mm)

AC INDUCTION MOTOR DATA SHEET0 Model No.or RFQ No. 00GBF31/32 AP001 1 Item No. Rev. No. [ ] SUR IPP 2 2 sets Project Name Project No 1-401-418-011 Quantity G PERFORMANCE DATA GENERAL SPECIFICATION 90 kW 280S Rated Output Frame Size sin 120 HP Number of Poles 4 sin Type HS Squirrel Cage Rotor Type Enclosure(Protection) Totally Enclosed (IP 54) (IPW 54) IC411(FC) Starting Method* Method of Cooling D.O.L Y415 V Rated Voltage 50 Hz Rated Frequency 3 153.7 A Number of Phases Current Full Load 600 % Insulation Class F B H Locked-rotor** Efficiency Temp. Rise at full load (by resistance method) 50% Load 93.4 % at 1.0 S.F 65 deg. C (Class B) sin Motor Location 75% Load 94.1 % Indoor Outdoor sin 100% Load 94.2 % Altitude Less than 1000 meter sin Power Factor(p.u) Relative Humidity Less than 80 % 50% Load 0.810 Ambient Temp. 55 deg. C (Max.) sin 75% Load 0.855 Duty Type Continuous (S1) sin 1.1 100% Load 0.865 Service Factor sin Speed at Full Load 1485 r.p.m sin Mounting B3 B5 V1 B3/B5 Torque Type Anti-Friction Full Load 59.0 kgm sin Bearing DE/N-DE 6318C3 / 6316C3 160 % Locked-rotor** Lubricant Grease(Gadus S2 V 100 2) sin 210 % Breakdown** External Thrust Not applicable sin Coupling Method Direct V-Belt Moment of Inertia (J) 2 Load - kgm Shaft Extension Single Double 2 Motor 3.023 kgm Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor) 82 dB(A) Location Refer to Outline Drawing 2.2 mm/sec (r.m.s) Application Pump Motor Vibration 3 times Area classification Non-Hazardous Permissible number of Cold Hot 2 times Type of Ex-Protection Not applicable consecutive starts 9002 Applicable Standard IEC or Equivalent Paint Munsell No. RAL 4.0PB5.4/5.5 ACCESSORIES GG SUBMITTAL DRAWING *. Space Heater(1ph. 240V, 180W) : 1EA/Motor Outline Dimension Drawing \ Motor Weight(Approx.) 690 kg *. Sun Shield B3 O-1401418-11 Main T-Box Ass'y 3M-024626 Performance Curve P-1401418-11 Thermal limit Curve T-1401418-11

SPARE PARTS

REMARK

High Efficiency

Date 2011-10-07

DSND J.S.KIM

CHKD

CHKD

APPD K.J.KANG


HHI W230-131-1

A4(210mm X 297mm)

HS

0.13

SPEED VS TORQUE & CURRENT CURVE 350 300 250 200 150 100 50 0 0 10 20 30 40 50 SPEED IN % 60 70 80 90 B D C 700 600 CURRENT IN % CURRENT IN % 500 400 300 200 100 0 100

A

TORQUE IN %

OUTPUT VS EFF., P.F & CURRENT CURVE 100 90 80 EFF. & P.F IN % 70 60 50 40 30 20 10 0 0 25 50 LOAD IN % 75 100 CURRENT P.F EFF 200 180 160 140 120 100 80 60 40 20 0 125


CURVE NO. T-1401418-11

TYPE : FULL LOAD TORQUE : J OF MOTOR : J OF LOAD :

HS59.0 3.023 0.13 kg.m kg.m2 kg.m2 RATED

90 kWSPEED : VOLTAGE RATED CURRENT

4P415 V153.7A

50 Hz 1485 rpm

3

TIME IN SEC. T

B A

D C

CURRENT IN p.u. A: THERMAL LIMIT CURVE AT HOT CONDITION B: THERMAL LIMIT CURVE AT COLD CONDITION C: TIME VS. CURRENT CURVE AT RATED VOLTAGE STARTING D: TIME VS. CURRENT CURVE AT 80% OF RATED VOLTAGE STARTINGSTARTING TIME at rated voltage starting at 80% of rated voltage starting SAFE STALL TIME 34 sec. at Hot condition 45 sec. at Cold condition

1.5 sec. 2 sec.


REV. DATE 2 2012-03-22 1 0 09.12.08 09 12 08

CONTENTSFOR CONSTRUCTION

DSNJ.S.KIM J J.S. S KIM

CHK-

APPDY.S.KIM Y S KIM Y.S.KIM

For F approval l

RM-P251-133

A4(210mm x 297mm)

IEC

1

B152 A108-1075

A108-1075 A108-1045 A53 Gr.B 15A A36 B152 A108-1075 A108-1045 A36

A48-CL20A48-CL20

5. RO FLUSHING PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE & DRAWING B. MOTOR DATA SHEET WITH DWG


For ProposalDate

For ReviewChek by

For FinalApp. By

HYORIM INDUSTRIES., Ltd Sur, Oman 00GBP21/22 AP001 RO FLUSHING PUMPS Indoor Outdoor Quantity OPERATION CONDITION DEMI. WATER120 m /hr 2.00 m /min T.Head3 3

Made by






1475 RPM 2

Des. Effic.

P r e s s


4.00 4.00 0 0


55 1 1~2 Min. 3



23.7 kW

Non WT. Non WT.

7

kg/g

PUMP CONSTRUCTION Type R.F R.F Position Casing / Impeller END TOP Radial 1 (One) Supplier by Type R. Output Thrust Oil (Oil bath) Drain PT 1/2" PT 1/4" Anchor B/N Com.Flange 5310 x 1 Voltage Spacer (Rotaion viewed from driver) 6310 1 Shaft Sleeve Bed, Baseplate Suc. Dis. Mount Type5"(DN125) ANSI #150 4"(DN100) ANSI #150

Non WT. Witness MATERIAL A743-CF8M / A743-CF8M A276-316 A276-316 A36 ELECTRIC MOTOR DUK JI TEFC Mfr. Pro.Grade Ins. Class HHI IP54 B BYes

Foot Close



30kW (40HP) Pole / rpm 4 P / 1475


F FNo



A36 (H.D.G)

SGL. RO 50 K.S.M


E45__VV (316L+SiC,Oring:Viton) Press Gauge


No.11 -

No.32 Press. Q'ty Press. -

No.54 kg/ /min kg/ /min

Drawing No. Paint Color WEIGHT (Approx.)

Outline DWG.

COD08337 No.1

Sectional DWG. CAD01641 M2 RAL 9002 (Total 240 ) Pump Base 163 kg 78 kg REMARKS Motor Total 729 320 kg 561 kg kg

Yes


OPERATING WEIGHT

Yes



Tel. +82-31-492-3701 Fax. +82-31-492-3704 A4 (210 x 297 mm)



Chk. by Choi, S. G.

App. by Shin, K. J.


2012.04.10

RO FLUSHING PUMPS

Power30kW (40HP)

Pole 4

Voltage 415 V

Freq. 50 Hz

Pha. 3

Pump Operating Condition & Performance Capacity 2.00050 045 040 035 030 025 020 015 010 005 000 0.00 100 090 080 070 EFFICIENCY (%) 060 050 040 030 020 010 000 0.00 EFFI.(%)

T.Head 40 m

Efficiency 55 %

S.G. 1

Temp. 55

Visco. 1~2 cp

BHP 23.7 kW

Vibration

Noise

m3/min

Max.56 Max.85 dB

TOTAL HEAD (m)

HEAD(m)

0.50

1.00

1.50

2.00

2.50

3.00

0.50

1.00

1.50

2.00

2.50

3.00

030 025 020 015 010 005 000 0.00

POWER (kW)

BHP (kW)

0.50

1.00

1.50 3 CAPACITY (m /min)

2.00

2.50

3.00


Tel. +82-31-492-3701 Fax. +82-31-492-3704A4 (210 x 297 mm)

AC INDUCTION MOTOR DATA SHEETModel No.or RFQ No. 1 00GBP21/22 AP001 Item No. Rev. No. [ ] 2 Project Name SUR IPP Project No. Quantity sets GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 200LL Rated Output 30 kW 40 HP Type HLS-XSD Number of Poles 4 single Enclosure(Protection) Totally Enclosed ( IP54 Rotor Type Squirrel Cage ) Method of Cooling IC411(FC) Starting Method* D.O.L Y50 Hz Rated Voltage 415 V 400 V 415 V Rated Frequency Number of Phases 3 52.8 A 54.7 A 52.8 A Current Full Load Insulation Class 700 % 700 % 700 % F B H Locked-rotor** Temp. Rise at full load (by resistance method) Efficiency at 1.0 S.F 65 50% Load 91.5 % single deg. C (Class B) Motor Location Indoor Outdoor 75% Load 92.2 % single Altitude 1000 meter 100% Load 92.0 % Less than single Relative Humidity 80 % Power Factor(p.u) Less than Ambient Temp. 55 deg. C (Max.) 50% Load 0.760 single Duty Type Continuos ( S1 ) 75% Load 0.835 single 1.1 100% Load 0.860 Service Factor single 1475 r.p.m single Mounting B3 B5 V1 B3/B5 Speed at Full Load Torque Type Anti-Friction Full Load 19.8 kgm single Bearing DE/N-DE 6313ZC3 / 6211ZC3 Locked-rotor** 150 % Lubricant Grease(Gadus S2 V 100 2) single Breakdown** 220 % External Thrust Not applicable single Coupling Method Direct V-Belt Moment of Inertia (J) Load(Max.) 69.500 kgm2 Shaft Extension Single Double 0.470 kgm2 Motor Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor) 68 dB(A) Location Refer to Outline Drawing 2.2 mm/sec (r.m.s) Application Vibration Cold 3 times Area classification Non-Hazardous Permissible number of Hot 2 times Not applicable consecutive starts Type of Ex-Protection RAL9002 Applicable Standard Paint Munsell No. IEC ACCESSORIES SUBMITTAL DRAWING *.Sun Shield Outline Dimension Drawing \ Motor Weight(Approx.) 320 B3 227B2000AB12 kg


227B8003CB5 P-1401418-9 TL-1401418-9

SPARE PARTS

REMARK

High Efficiency

Date 2011-10-12

DSND E.S.KIM

CHKD S. J. RA

CHKD O. J. KIM

APPD J. H. KIM


HHI W230-131-1


A4(210mm X 297mm)

P-1401418-9 TL-1401418-9

69.5




TL-1401418-9 4 P 1475 V A 50 HZ RPM V A

B A MTIME IN SEC.

C


REMARKS

DATE

DSND BY

CHKD BYHWANG I.K.

APPD BY

10

12.03.22 E.S.KIM

K.J.KANG


1

1

For Construction

1

6. MBE FEED PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE & DRAWING B. MOTOR DATA SHEET WITH DWG


For ProposalDate

For ReviewChek by

For FinalApp. By

HYORIM INDUSTRIES., Ltd Sur, Oman 00GCF51/52 AP001 MBE FEED PUMPS Indoor Outdoor Quantity OPERATION CONDITION RO PERMEATE WATER35 m /hr 0.58 m /min T.Head3 3

Made by





Speed45 m NPSHreq'd

1470 RPM 2

Des. Effic.

P r e s s


4.50 4.50 0 0


2

55 1 1~2 Min. 3



11.3 kW

Non WT. Non WT.

8

kg/g

PUMP CONSTRUCTION Type F.F F.F Position Casing / Impeller END TOP Radial 1 (One) Supplier by Type R. Output Thrust Oil (Oil bath) Drain PT 1/2" PT 1/4" Anchor B/N Com.Flange 5310 x 1 Voltage Spacer (Rotaion viewed from driver) 6310 1 Shaft Sleeve Bed, Baseplate Suc. Dis. Mount Type3"(DN80) ANSI #1502.5"(DN65) ANSI #150


Foot Close



15kW (20HP) Pole / rpm 4 P / 1470


F FNo



A36 (H.D.G)

SGL. RO 50 K.S.M




No.11 -




Outline DWG.

COD08346 No.1


Yes


OPERATING WEIGHT

Yes



Tel. +82-31-492-3701 Fax. +82-31-492-3704 A4 (210 x 297 mm)

ESTIMATED PERFORMANCE CURVECustomer PJT Name Item No. Pump Pump Model DGP 8640 Pump Nozzle3"(DN80) x 2.5"(DN65)


Chk. by Choi, S. G.

App. by Shin, K. J.

HYORIM INDUSTRIES., Ltd SUR IPP PROJECT - Water Treatment System 00GCF51/52 AP001 Q'TY 2 Service Name Motor Speed 1470 rpm Type TEFC

2012.04.10

MBE FEED PUMPS

Power15kW (20HP)

Pole 4

Voltage 415 V

Freq. 50 Hz

Pha. 3


T.Head 45 m

Efficiency 38 %

S.G. 1

Temp. 55

Visco. 1~2 cp

BHP 11.3 kW

Vibration

Noise

m3/min

Max.56 Max.85 dB

TOTAL HEAD (m)

HEAD(m)

0.20

0.40

0.60

0.80

1.00

1.20

1.40

1.60

1.80

2.00

0.20

0.40

0.60

0.80

1.00

1.20

1.40

1.60

1.80

2.00

015 POWER (kW) 010 005 000 0.00 BHP (kW)

0.20

0.40

0.60

0.80


1.40

1.60

1.80

2.00


Tel. +82-31-492-3701 Fax. +82-31-492-3704A4 (210 x 297 mm)

AC INDUCTION MOTOR DATA SHEETModel No.or RFQ No. 1 Item No. Rev. No. [ ] 00GCF51/52 AP001 Project Name SUR IPP Project No. Quantity 2 sets GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 160L Rated Output 15 kW 20 HP Type HLS-XSD Number of Poles 4 single Enclosure(Protection) Totally Enclosed ( IP54 Rotor Type Squirrel Cage ) Method of Cooling IC411(FC) Starting Method* D.O.L Y50 Hz Rated Voltage 415 V 400 V 415 V Rated Frequency Number of Phases 3 26.7 A 27.7 A 26.7 A Current Full Load Insulation Class 650 % 650 % 650 % F B H Locked-rotor** Temp. Rise at full load (by resistance method) Efficiency at 1.0 S.F 65 50% Load 90.8 % single deg. C (Class B) Motor Location Indoor Outdoor 75% Load 92.0 % single Altitude 1000 meter 100% Load 91.8 % Less than single Relative Humidity 80 % Power Factor(p.u) Less than Ambient Temp. 55 deg. C (Max.) 50% Load 0.700 single Duty Type Continuos ( S1 ) 75% Load 0.800 single 1.1 100% Load 0.850 Service Factor single 1470 r.p.m single Mounting B3 B5 V1 B3/B5 Speed at Full Load Torque Type Anti-Friction Full Load 9.9 kgm single Bearing DE/N-DE 6309ZC3 / 6309ZC3 Locked-rotor** 180 % Lubricant Grease(Gadus S2 V 100 2) single Breakdown** 210 % External Thrust Not applicable single Coupling Method Direct V-Belt Moment of Inertia (J) Load(Max.) 14.025 kgm2 Shaft Extension Single Double 0.090 kgm2 Motor Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor) 72 dB(A) Location Refer to Outline Drawing 2.2 mm/sec (r.m.s) Application Vibration Cold 3 times Area classification Non-Hazardous Permissible number of Hot 2 times Not applicable consecutive starts Type of Ex-Protection RAL9002 Applicable Standard Paint Munsell No. IEC ACCESSORIES SUBMITTAL DRAWING *.Sun Shield Outline Dimension Drawing \ Motor Weight(Approx.) 135 B3 227B2000AB06 kg


227B8008LB1 P-1401418-12 TL-1401418-12

SPARE PARTS

REMARK

High Efficiency

Date 2011-10-12

DSND E.S.KIM

CHKD S. J. RA

CHKD O. J. KIM

APPD J. H. KIM


HHI W230-131-1


A4(210mm X 297mm)

P-1401418-12 TL-1401418-12

14.0

SPEED VS TORQUE & CURRENT CURVE 350 300 250 TORQUE IN % 200 150 100 50 0 0 10 20 30 40 50 SPEED IN % 60 70 80 90 100 B D A C 700 600 500 400 300 200 100 0

OUTPUT VS EFF., P.F & CURRENT CURVE 100 90 80 EFF. & P.F IN % 70 60 50 40 30 20 10 0 0 25 50 LOAD IN % 75 100 125 CURRENT P.F EFF 200 180 160 CURRENT IN % 140 120 100 80 60 40 20 0

CURRENT IN %


TL-1401418-12 4 P 1475 V A 50 HZ RPM V A

B A MTIME IN SEC.

C


REMARKS

DATE

DSND BY

CHKD BYHWANG I.K.

APPD BY

10

12.03.22

E.S.KIM

K.J.KANG


1

1

For Construction

1

7. MBE REGENERATION PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE & DRAWING B. MOTOR DATA SHEET WITH DWG


For ProposalDate

For ReviewChek by

For FinalApp. By

HYORIM INDUSTRIES., Ltd Sur, Oman 00GCP41/42 AP001 MBE REGENERATION PUMPS Indoor Outdoor Quantity OPERATION CONDITION DEMI. WATER35 m /hr 0.58 m /min T.Head3 3

Made by




DGP 6531Horizontal Centrifugal Pump Motor PERFORMANCE Engine 38 7.5 % kW


1470 RPM 2.5

Des. Effic.

P r e s s


3.00 3.00 0 0


55 1 1~2 Min. 4



Non WT. Non WT.

6

kg/g

PUMP CONSTRUCTION Type R.F R.F Position Casing / Impeller END TOP Radial 1 (One) Supplier by Type R. Output Thrust Oil (Oil bath) Drain PT 3/8" PT 1/4" Anchor B/N Com.Flange 6308 2 Voltage Spacer (Rotaion viewed from driver) 6308 1 Shaft Sleeve Bed, Baseplate Suc. Dis. Mount Type2.5"(DN65) ANSI #150


2"(DN50) ANSI #150

Foot Close



11kW (15HP) Pole / rpm 4 P / 1470


F FNo



A36 (H.D.G)

SGL. RO 40 K.S.M




No.11 -




Outline DWG.

COD08326 No.1


Yes


OPERATING WEIGHT

Yes



Tel. +82-31-492-3701 Fax. +82-31-492-3704 A4 (210 x 297 mm)

ESTIMATED PERFORMANCE CURVECustomer PJT Name Item No. Pump Pump Model DGP 6531 Pump Nozzle2.5"(DN65)


Chk. by Choi, S. G.

App. by Shin, K. J.

HYORIM INDUSTRIES., Ltd SUR IPP PROJECT - Water Treatment System 00GCP41/42 AP001 Q'TY 2 Service Name Motor Speed 1470 rpm Type TEFC

2012.04.10

MBE REGENERATION PUMPS

Power11kW (15HP)

Pole 4

Voltage 415 V

Freq. 50 Hz

Pha. 3

x 2"(DN50)

Pump Operating Condition & Performance Capacity 0.58040 035 TOTAL HEAD (m) 030 025 020 015 010 005 000 0.00 100 090 080 070 EFFICIENCY (%) 060 050 040 030 020 010 000 0.00 EFFI.(%) 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90

T.Head 30 m

Efficiency 38 %

S.G. 1

Temp. 55

Visco. 1~2 cp

BHP 7.5 kW

Vibration

Noise

m3/min

Max.56 Max.85 dB

HEAD(m)

0.10

0.20

0.30

0.40

0.50

0.60

0.70

0.80

0.90

010 POWER (kW) 008 006 004 002 000 0.00 0.10 0.20 0.30 0.40 0.50 3 CAPACITY (m /min) 0.60 0.70 0.80 0.90 BHP (kW)


Tel. +82-31-492-3701 Fax. +82-31-492-3704A4 (210 x 297 mm)

AC INDUCTION MOTOR DATA SHEETModel No.or RFQ No. 1 00GCP41/42 AP001 Item No. Rev. No. [ ] Project Name SUR IPP Project No. Quantity 2 sets GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 160M Rated Output 11 kW 15 HP Type HLS-XSD Number of Poles 4 single Enclosure(Protection) Totally Enclosed ( IP54 Rotor Type Squirrel Cage ) Method of Cooling IC411(FC) Starting Method* D.O.L Y50 Hz Rated Voltage 415 V 400 V 415 V Rated Frequency Number of Phases 3 19.8 A 20.5 A 19.8 A Current Full Load Insulation Class 650 % 650 % 650 % F B H Locked-rotor** Temp. Rise at full load (by resistance method) Efficiency at 1.0 S.F 65 50% Load 90.0 % single deg. C (Class B) Motor Location Indoor Outdoor 75% Load 91.2 % single Altitude 1000 meter 100% Load 91.0 % Less than single Relative Humidity 80 % Power Factor(p.u) Less than Ambient Temp. 55 deg. C (Max.) 50% Load 0.698 single Duty Type Continuos ( S1 ) 75% Load 0.790 single 1.1 100% Load 0.850 Service Factor single 1470 r.p.m single Mounting B3 B5 V1 B3/B5 Speed at Full Load Torque Type Anti-Friction Full Load 7.3 kgm single Bearing DE/N-DE 6309ZC3 / 6309ZC3 Locked-rotor** 180 % Lubricant Grease(Gadus S2 V 100 2) single Breakdown** 220 % External Thrust Not applicable single Coupling Method Direct V-Belt Moment of Inertia (J) Load(Max.) 9.900 kgm2 Shaft Extension Single Double 0.060 kgm2 Motor Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor) 72 dB(A) Location Refer to Outline Drawing 2.2 mm/sec (r.m.s) Application Vibration Cold 3 times Area classification Non-Hazardous Permissible number of Hot 2 times Not applicable consecutive starts Type of Ex-Protection RAL9002 Applicable Standard Paint Munsell No. IEC ACCESSORIES SUBMITTAL DRAWING *.Sun Shield Outline Dimension Drawing \ Motor Weight(Approx.) 117 B3 227B2000AB05 kg


227B8008LB1 P-1401418-6 TL-1401418-6

SPARE PARTS

REMARK

High Efficiency

Date 2011-10-12

DSND E.S.KIM

CHKD S. J. RA

CHKD O. J. KIM

APPD J. H. KIM


HHI W230-131-1


A4(210mm X 297mm)

P-1401418-6 TL-1401418-6

9.9



CURRENT IN %


TL-1401418-6 4 P 1470 V A 50 HZ RPM V A

B A

TIME IN SEC.

C

Ist (P.U) NOTE A: THERMAL LIMIT CURVE AT HOT CONDITION B: THERMAL LIMIT CURVE AT COLD CONDITION C: CURRENT/TIME CURVE AT RATED VOLTAGE STARTINGREV. CONTENS DATE DSND BY CHKD BYHWANG I.K.

REMARKS

APPD BY

10

FOR CONSTRUCTION

12.03.22

E.S.KIM

K.J.KANG


1

1

For Construction

1

8. POTABLE WATER PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE & DRAWING B. MOTOR DATA SHEET WITH DWG


For ProposalDate

For ReviewChek by

For FinalApp. By

HYORIM INDUSTRIES., Ltd Sur, Oman 00GKC11/12 AP001 POTABLE WATER PUMPS Indoor Outdoor Quantity OPERATION CONDITION POTABLE WATER5 m /hr 0.08 m /min T.Head3 3

Made by





Speed30 m NPSHreq'd

1475 RPM 4

Des. Effic.

P r e s s


3.00 3.00 0 0


2

55 1 1~2 Min. 6



Non WT. Non WT.

5

kg/g

PUMP CONSTRUCTION Type F.F F.F Position Casing / Impeller END TOP Radial 1 (One) Supplier by Type R. Output Thrust Oil (Oil bath) Drain PT 3/8" PT 1/4" Anchor B/N Com.Flange 6306 2 Voltage Spacer (Rotaion viewed from driver) 6306 1 Shaft Sleeve Bed, Baseplate Suc. Dis. Mount Type2"(DN50) ANSI #1501.5"(DN40) ANSI #150

Non WT. Witness MATERIAL A743-CF8 / A743-CF8 A276-304 A276-304 A36 ELECTRIC MOTOR DUK JI TEFC Mfr. Pro.Grade Ins. Class HHI IP54 B BYes

Foot Close



5.5kW (7.5HP) Pole / rpm 4 P / 1475


F FNo



A36 (H.D.G)

SGL. RO 30 K.S.M




No.11 -




Outline DWG.

COD08323 No.1


Yes


OPERATING WEIGHT

Yes



Tel. +82-31-492-3701 Fax. +82-31-492-3704 A4 (210 x 297 mm)



Chk. by Choi, S. G.

App. by Shin, K. J.

HYORIM INDUSTRIES., Ltd SUR IPP PROJECT - Water Treatment System 00GKC11/12 AP001 Q'TY 2 Service Name Motor Speed 1475 rpm Type TEFC

2012.04.10

POTABLE WATER PUMPS

Power5.5kW (7.5HP)

Pole 4

Voltage 415 V

Freq. 50 Hz

Pha. 3

Pump Operating Condition & Performance Capacity 0.08035 030 TOTAL HEAD (m) 025 020 015 010 005 000 0.00 100 090 080 070 EFFICIENCY (%) 060 050 040 030 EFFI.(%) 020 010 000 0.00

T.Head 30 m

Efficiency 10 %

S.G. 1

Temp. 55

Visco. 1~2 cp

BHP 4.1 kW

Vibration

Noise

m3/min

Max.56 Max.85 dB

HEAD(m)

CART E45EFVV SGL. RO

0.05

0.10

0.15

0.20

0.25

0.30

0.05

0.10

0.15

0.20

0.25

0.30

006 005 004 003 002 001 000 0.00

POWER (kW)

BHP (kW)

0.05

0.10


0.20

0.25

0.30


Tel. +82-31-492-3701 Fax. +82-31-492-3704A4 (210 x 297 mm)

AC INDUCTION MOTOR DATA SHEET00GKC11/12 AP001 Model No.or RFQ No. 1 Item No. Rev. No. [ ] Project Name SUR IPP Project No. Quantity 2 sets GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 160M Rated Output 5.5 kW 7.5 HP Type HLS-XSD Number of Poles 4 single Enclosure(Protection) Totally Enclosed ( IP54 Rotor Type Squirrel Cage ) Method of Cooling IC411(FC) Starting Method* D.O.L YRated Frequency 50 Hz Rated Voltage 400 V 415 V 415 V Number of Phases 3 10.1 A 10.5 A 10.1 A Current Full Load Insulation Class 650 % 650 % 650 % F B H Locked-rotor** Temp. Rise at full load (by resistance method) Efficiency 65 at 1.0 S.F 50% Load 88.7 % single deg. C (Class B) Motor Location Indoor Outdoor 75% Load 89.4 % single Altitude 1000 meter 100% Load 89.2 % Less than single Relative Humidity 80 % Power Factor(p.u) Less than Ambient Temp. 55 deg. C (Max.) 50% Load 0.718 single Duty Type 75% Load Continuos ( S1 ) 0.805 single Service Factor 1.2 100% Load 0.850 single 1475 r.p.m single Mounting B3 B5 V1 B3/B5 Speed at Full Load Torque Type Anti-Friction Full Load 3.6 kgm single Bearing DE/N-DE 6309ZC3 / 6309ZC3 Locked-rotor** 190 % Lubricant Grease(Gadus S2 V 100 2) single Breakdown** 230 % External Thrust Not applicable single Coupling Method Direct V-Belt Moment of Inertia (J) Load(Max.) 9.900 kgm2 Shaft Extension Single Double Motor 0.060 kgm2 Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor) 60 dB(A) Location Refer to Outline Drawing 2.2 mm/sec (r.m.s) Application Vibration Cold 3 times Area classification Non-Hazardous Permissible number of Hot 2 times Not applicable consecutive starts Type of Ex-Protection RAL9002 Applicable Standard Paint Munsell No. IEC ACCESSORIES SUBMITTAL DRAWING *.Sun Shield Outline Dimension Drawing \ Motor Weight(Approx.) 117 B3 227B2000AB05 kg


227B8008LB1 P-1401418-4 TL-1401418-4

SPARE PARTS

REMARK

High Efficiency

Date 2011-11-30

DSND E.S.KIM

CHKD S. J. RA

CHKD O. J. KIM

APPD J. H. KIM


HHI W230-131-1


A4(210mm X 297mm)

P-1401418-4 TL-1401418-4

HLS-XSD

50



CURRENT IN %

THERMAL LIMIT & TIME CURRENT CURVETYPE : RATED TORQUE : J OF MOTOR : J OF LOAD(Max.) : HLS-XSD 3.60 Kg.m 0.060 Kg.m2 9.9 Kg.m2 RATED SPEED VOLTAGE RATED CURRENT 415 V 10.1 A 7.5 HP

TL-1401418-4 4 P 1475 V A 50 HZ RPM V A

B ATIME IN SEC.

C


REMARKS

DATE

DSND BY

CHKD BYHWANG I.K.

APPD BY

10

12.03.22

E.S.KIM

K.J.KANG


1

1

For Construction

1

9. CHEMICAL CLEANING PUMPS A. PUMP DATA SHEET WITH PERFORMANCE CURVE & DRAWING B. MOTOR DATA SHEET WITH DWG


For ProposalDate

For ReviewChek by

For FinalApp. By

HYORIM INDUSTRIES., Ltd Sur, Oman 00GBP31/32 AP001 CHEMICAL CLEANING PUMPS Indoor Outdoor Quantity OPERATION CONDITION CHEMICAL CLEANING WATER120 m /hr 2.00 m /min T.Head3 3

Made by





Speed30 m NPSHreq'd

1475 RPM 2

Des. Effic.

P r e s s


3.00 3.00 0 0


2

55 1 1~2 Min. 3



15.8 kW

Non WT. Non WT.

6

kg/g

PUMP CONSTRUCTION Type F.F F.F Position Casing / Impeller END TOP Radial 1 (One) Supplier by Type R. Output Thrust Oil (Oil bath) Drain PT 1/2" PT 1/4" Anchor B/N Com.Flange 5310 x 1 Voltage Spacer (Rotaion viewed from driver) 6310 1 Shaft Sleeve Bed, Baseplate Suc. Dis. Mount Type5"(DN125) ANSI #150 4"(DN100) ANSI #150

Non WT. Witness MATERIAL A743-CF8M / A743-CF8M A276-316 A276-316 A36 ELECTRIC MOTOR DUK JI TEFC18.5kW (25HP)

Foot Close




HHI IP54 B BYes





A36 (H.D.G)

SGL. RO 50 K.S.M




No.11 -




Outline DWG.

COD08336 No.1


Yes


OPERATING WEIGHT

Yes



Tel. +82-31-492-3701 Fax. +82-31-492-3704 A4 (210 x 297 mm)



Chk. by Choi, S. G.

App. by Shin, K. J.


2012.04.10

CHEMICAL CLEANING PUMPS

Power18.5kW (25HP)

Pole 4

Voltage 415 V

Freq. 50 Hz

Pha. 3

Pump Operating Condition & Performance Capacity 2.00040 035 TOTAL HEAD (m) 030 025 020 015 010 005 000 0.00 100 090 080 070 EFFICIENCY (%) 060 050 040 030 020 010 000 0.00 EFFI.(%) 0.50 1.00 1.50 2.00 2.50 3.00

T.Head 30 m

Efficiency 62 %

S.G. 1

Temp. 55

Visco. 1~2 cp

BHP 15.8 kW

Vibration

Noise

m3/min

Max.56 Max.85 dB

HEAD(m)

0.50

1.00

1.50

2.00

2.50

3.00

020 POWER (kW) 015 010 005 000 0.00 BHP (kW)

0.50

1.00


2.00

2.50

3.00


Tel. +82-31-492-3701 Fax. +82-31-492-3704A4 (210 x 297 mm)

AC INDUCTION MOTOR DATA SHEETModel No.or RFQ No. 1 Item No. 00GBP31/32 AP001 Rev. No. [ ] 2 Project Name SUR IPP Project No. Quantity sets GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 180M Rated Output 18.5 kW 25 HP Type HLS-XSD Number of Poles 4 single Enclosure(Protection) Totally Enclosed ( IP54 Rotor Type Squirrel Cage ) Method of Cooling IC411(FC) Starting Method* D.O.L Y50 Hz Rated Voltage 415 V 400 V 415 V Rated Frequency Number of Phases 3 32.8 A 34.1 A 32.8 A Current Full Load Insulation Class 700 % 700 % 700 % F B H Locked-rotor** Temp. Rise at full load (by resistance method) Efficiency at 1.0 S.F 65 50% Load 90.5 % single deg. C (Class B) Motor Location Indoor Outdoor 75% Load 92.4 % single Altitude 1000 meter 100% Load 92.2 % Less than single Relative Humidity 80 % Power Factor(p.u) Less than Ambient Temp. 55 deg. C (Max.) 50% Load 0.725 single Duty Type Continuos ( S1 ) 75% Load 0.800 single 1.1 100% Load 0.850 Service Factor single 1475 r.p.m single Mounting B3 B5 V1 B3/B5 Speed at Full Load Torque Type Anti-Friction Full Load 12.2 kgm single Bearing DE/N-DE 6310ZC3 / 6310ZC3 Locked-rotor** 160 % Lubricant Grease(Gadus S2 V 100 2) single Breakdown** 220 % External Thrust Not applicable single Coupling Method Direct V-Belt Moment of Inertia (J) Load(Max.) 15.125 kgm2 Shaft Extension Single Double 0.166 kgm2 Motor Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor) 75 dB(A) Location Refer to Outline Drawing 2.2 mm/sec (r.m.s) Application Vibration Cold 3 times Area classification Non-Hazardous Permissible number of Hot 2 times Not applicable consecutive starts Type of Ex-Protection RAL9002 Applicable Standard Paint Munsell No. IEC ACCESSORIES SUBMITTAL DRAWING *.Sun Shield Outline Dimension Drawing \ Motor Weight(Approx.) 177 B3 227B2000AB07 kg


227B8008LB2 P-1401418-7 TL-1401418-7

SPARE PARTS

REMARK

High Efficiency

Date 2010-10-12

DSND E.S.KIM

CHKD S. J. RA

CHKD O. J. KIM

APPD J. H. KIM


HHI W230-131-1


A4(210mm X 297mm)

P-1401418-7 TL-1401418-7

HLS-XSD 15.1




TL-1401418-7 4 P 1475 V A 50 HZ RPM V A

B A MTIME IN SEC.

C


REMARKS

DATE

DSND BY

CHKD BYHWANG I.K.

APPD BY

10

12.03.22

E.S.KIM

K.J.KANG


1

1

For Construction

1

10. H2SO4 TRANSFER PUMP A. PUMP DATA SHEET WITH PERFORMANCE CURVE & DRAWING B. MOTOR DATA SHEET WITH DWG


For ProposalDate

For ReviewChek by

For FinalApp. By

HYORIM INDUSTRIES., Ltd Sur, Oman 00GBN13/14 AP001 H2SO4 TRANSFER PUMP Indoor Outdoor Quantity OPERATION CONDITION H2SO4(96%)10 m /hr 0.17 m /min T.Head3 3

Made by






1445 RPM 3

Des. Effic.

P r e s s


2.76 2.76 0 0


50 1.84 1~2 Min. 5



Non WT. Non WT.

5

kg/g

PUMP CONSTRUCTION Type F.F F.F Position Casing / Impeller END TOP Radial 1 (One) Supplier by Type R. Output Thrust Oil (Oil bath) Drain PT 3/8" PT 1/4" Anchor B/N Com.Flange Press Gauge Drawing No. Paint Color WEIGHT (Approx.) 6306 2 Voltage Spacer (Rotaion viewed from driver) 6306 1 Shaft Sleeve Bed, Baseplate Suc. Dis. Mount Type2"(DN50) ANSI #1501.5"(DN40) ANSI #150

Non WT. Witness MATERIAL ALLOY-20 / ALLOY-20 ALLOY-20 ALLOY-20 A36 ELECTRIC MOTOR DUK JI TEFC Mfr. Pro.Grade Ins. Class HHI IP55 B BYes

Foot Close



3.7kW (5HP) Pole / rpm 4 P / 1445


F FNo



A36 (H.D.G)




Outline DWG.

COD08322 No.1


Sectional DWG. CAD01514 M5 RAL 9002 (Total 240 ) Pump Base 57 kg 51 kg REMARKS Motor Total 224 64 kg kg 172 kg

Yes


OPERATING WEIGHT

Yes



Tel. +82-31-492-3701 Fax. +82-31-492-3704 A4 (210 x 297 mm)



Chk. by Choi, S. G.

App. by Shin, K. J.

HYORIM INDUSTRIES., Ltd SUR IPP PROJECT - Water Treatment System 00GBN13/14 AP001 Q'TY 2 Service Name Motor Speed 1445 rpm Type TEFC

2012.04.10

H2SO4 TRANSFER PUMP

Power3.7kW (5HP)

Pole 4

Voltage 415 V

Freq. 50 Hz

Pha. 3


T.Head 15 m

Efficiency 28 %

S.G. 1.84

Temp. 50

Visco. 1~2 cp

BHP 2.7 kW

Vibration

Noise

m3/min

Max.56 Max.85 dB

TOTAL HEAD (m)

HEAD(m)

0.05

0.10

0.15

0.20

0.25

0.05

0.10

0.15

0.20

0.25

004 003 003 002 002 001 001 000 0.00

POWER (kW)

BHP (kW)

0.05

0.10


0.20

0.25


Tel. +82-31-492-3701 Fax. +82-31-492-3704A4 (210 x 297 mm)

AC INDUCTION MOTOR DATA SHEETModel No.or RFQ No. 1 Item No. Rev. No. [ ] 00GBN13/14 AP001 2 Project Name SUR IPP Project No. Quantity sets GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 132S Rated Output 3.7 kW 5 HP Type HLS Number of Poles 4 single Enclosure(Protection) Totally Enclosed ( IP55) Rotor Type Squirrel Cage IC411(FC) Starting Method* Method of Cooling D.O.L Y50 Hz Rated Voltage Rated Frequency 415 V Number of Phases 3 7.3 A Current Full Load Insulation Class 650 % F B H Locked-rotor** Temp. Rise at full load (by resistance method) Efficiency at 1.0 S.F 65 50% Load 86.0 % single deg. C (Class B) 75% Load 86.8 % Motor Location Indoor Outdoor single Altitude 1000 meter 100% Load 86.6 % Less than single Relative Humidity 80 % Power Factor(p.u) Less than Ambient Temp. 50 deg. C (Max.) 50% Load 0.654 single Duty Type 75% Load Continuos ( S1 ) 0.758 single 1.2 100% Load 0.810 Service Factor single 1445 r.p.m single Mounting B3 B5 V1 B3/B5 Speed at Full Load Torque Type Anti-Friction Full Load 2.5 kgm single Bearing DE/N-DE 6208ZZC3 / 6208ZZC3 Locked-rotor** 200 % Lubricant GREASE(POLYREX-EM) single Breakdown** 250 % External Thrust Not applicable single Coupling Method Direct V-Belt Moment of Inertia (J) 3.575 kgm2 Load(Max.) Shaft Extension Single Double 0.013 kgm2 Motor Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor) 82 dB(A) Location Refer to Outline Drawing 1.6 mm/sec (r.m.s) Application Vibration Cold 3 times Area classification Non-Hazardous Permissible number of Hot 2 times Not applicable consecutive starts Type of Ex-Protection RAL9002 Applicable Standard Paint Munsell No. IEC ACCESSORIES SUBMITTAL DRAWING * Sun Shield Outline Dimension Drawing \ Motor Weight(Approx.) 64 B3 227B2000AC03 kg


227B8004CD P-1401418-3 TL-1401418-3

SPARE PARTS

REMARK

High Efficiency

Date 2011-11-14

DSND S.W. SEO

CHKD S. J. RA

CHKD O. J. KIM

APPD J. H. KIM


HHI W230-131-1


A4(210mm X 297mm)

HYUNDAI PERFORMANCE CURVEHEAVY INDUSTRIES CO., LTD

CURVE NO. P-1401418-3 4P415V 7.3A

Type

:

HLS 2.5 Kg.m Kg.m2 2

3.7 kWSpeed at Full Load : Rated Voltage Full Load Current

50 Hz 1445 RPM

Full Load Torque :

Motor moment of Inertia (J) : 0.013 Load moment of Inertia (J) : 3.6

Kg.m

SPEED VS TORQUE & CURRENT CURVE 400 350 300 TORQUE IN % 250 400 200 300 150 100 50 0 0 10 20 30 40 50 SPEED IN % 60 70 80 90 200 100 0 100 700 600 500 CURRENT IN % CURRENT IN %

OUTPUT VS EFF., P.F & CURRENT CURVE 100 90 80 EFF. & P.F IN % 70 60 50 40 30 20 10 0 0 25 50 LOAD IN % 75 100 CURRENT P.F EFF. 200 180 160 140 120 100 80 60 40 20 0 125

RM-P251-133

A4(210mm x 297mm)


CURVE NO. TL-1401418-3

Type : Full Load Torque :

HLS 2.5 Kg.m Kg.m2 2

3.7 kWSpeed at Full Load : Rated Voltage Full Load Current

4P415V 7.3A

50 Hz 1445 RPM

Motor moment of Inertia (J) : 0.013 Load moment of Inertia (J) : 3.6

Kg.m

3

TIME IN SEC.

B A

CCURRENT IN p.u. A: THERMAL LIMIT CURVE AT HOT CONDITION B: THERMAL LIMIT CURVE AT COLD CONDITION C: TIME VS. CURRENT CURVE AT RATED VOLTAGE STARTING

STARTING TIME 1 sec. at rated voltage starting - at 80% of rated voltage starting

SAFE STALL TIME 10 sec. at Hot condition 15 sec. at Cold condition


REV. DATE 2 2012-03-22 1 0 2012-01-06

CONTENTSFOR CONSTRUCTION

DSN

CHK

APPD

For approval

A.R.PARK A.R.PARK

-

J.H.KIM J.H.KIM

RM-P251-133

A4(210mm x 297mm)

1

11. NaOH TRANSFER PUMP A. PUMP DATA SHEET WITH PERFORMANCE CURVE & DRAWING B. MOTOR DATA SHEET WITH DWG


For ProposalDate

For ReviewChek by

For FinalApp. By

HYORIM INDUSTRIES., Ltd Sur, Oman 00GBN33/34 AP001 NaOH TRANSFER PUMP Indoor Outdoor Quantity OPERATION CONDITION NaOH(46%)10 m /hr 0.17 m /min T.Head3 3

Made by






1445 RPM 3

Des. Effic.

P r e s s


2.24 2.24 0 0


50 1.49 1~2 Min. 5



Non WT. Non WT.

5

kg/g

PUMP CONSTRUCTION Type R.F R.F Position Casing / Impeller END TOP Radial 1 (One) Supplier by Type R. Output Thrust Oil (Oil bath) Drain PT 3/8" PT 1/4" Anchor B/N Com.Flange Press Gauge Drawing No. Paint Color WEIGHT (Approx.) 6306 2 Voltage Spacer (Rotaion viewed from driver) 6306 1 Shaft Sleeve Bed, Baseplate Suc. Dis. Mount Type2"(DN50) ANSI #1501.5"(DN40) ANSI #150


Foot Close



3.7kW (5HP) Pole / rpm 4 P / 1445


F FNo



A36 (H.D.G)

DBL. RO 30E2(2/5)__EE (316L+SiC,Oring:EPDM)


K.S.M No.11 1/4" 1/4" No.32 Press. Q'ty Press. No.54 2~3 kg/ 1~2 /min kg/ /min

Outline DWG.

COD08322 No.1


Sectional DWG. CAD01514 M2 RAL 9002 (Total 240 ) Pump Base 57 kg 51 kg REMARKS Motor Total 224 64 kg kg 172 kg

Yes


OPERATING WEIGHT

Yes



Tel. +82-31-492-3701 Fax. +82-31-492-3704 A4 (210 x 297 mm)



Chk. by Choi, S. G.

App. by Shin, K. J.

HYORIM INDUSTRIES., Ltd SUR IPP PROJECT - Water Treatment System 00GBN33/34 AP001 Q'TY 2 Service Name Motor Speed 1445 rpm Type TEFC

2012.04.10

NaOH TRANSFER PUMP

Power3.7kW (5HP)

Pole 4

Voltage 415 V

Freq. 50 Hz

Pha. 3


T.Head 15 m

Efficiency 28 %

S.G. 1.49

Temp. 50

Visco. 1~2 cp

BHP 2.2 kW

Vibration

Noise

m3/min

Max.56 Max.85 dB

TOTAL HEAD (m)

HEAD(m)

0.05

0.10

0.15

0.20

0.25

0.05

0.10

0.15

0.20

0.25

3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.00

POWER (kW)

BHP (kW)

0.05

0.10


0.20

0.25


Tel. +82-31-492-3701 Fax. +82-31-492-3704A4 (210 x 297 mm)

AC INDUCTION MOTOR DATA SHEETModel No.or RFQ No. 1 00GBN33/34 AP001 Item No. Rev. No. [ ] 2 Project Name SUR IPP Project No. Quantity sets GENERAL SPECIFICATION PERFORMANCE DATA Frame Size 132S Rated Output 3.7 kW 5 HP Type HLS Number of Poles 4 single Enclosure(Protection) Totally Enclosed ( IP55) Rotor Type Squirrel Cage IC411(FC) Starting Method* Method of Cooling D.O.L Y50 Hz Rated Voltage Rated Frequency 415 V Number of Phases 3 7.3 A Current Full Load Insulation Class 650 % F B H Locked-rotor** Temp. Rise at full load (by resistance method) Efficiency at 1.0 S.F 65 50% Load 86.0 % single deg. C (Class B) 75% Load 86.8 % Motor Location Indoor Outdoor single Altitude 1000 meter 100% Load 86.6 % Less than single Relative Humidity 80 % Power Factor(p.u) Less than Ambient Temp. 50 deg. C (Max.) 50% Load 0.654 single Duty Type 75% Load Continuos ( S1 ) 0.758 single 1.2 100% Load 0.810 Service Factor single 1445 r.p.m single Mounting B3 B5 V1 B3/B5 Speed at Full Load Torque Type Anti-Friction Full Load 2.5 kgm single Bearing DE/N-DE 6208ZZC3 / 6208ZZC3 Locked-rotor** 200 % Lubricant GREASE(POLYREX-EM) single Breakdown** 250 % External Thrust Not applicable single Coupling Method Direct V-Belt Moment of Inertia (J) 3.575 kgm2 Load(Max.) Shaft Extension Single Double 0.013 kgm2 Motor Terminal Main Steel Cast Iron Box Aux. Yes No Sound Pressure Level (No-load & mean value at 1m from motor) 82 dB(A) Location Refer to Outline Drawing 1.6 mm/sec (r.m.s) Application Vibration Cold 3 times Area classification Non-Hazardous Permissible number of Hot 2 times Not applicable consecutive starts Type of Ex-Protection RAL9002 Applicable Standard Paint Munsell No. IEC ACCESSORIES SUBMITTAL DRAWING * Sun Shield Outline Dimension Drawing \ Motor Weight(Approx.) 64 B3 227B2000AC03 kg


227B8004CD P-1401418-3 TL-1401418-3

SPARE PARTS

REMARK

High Efficiency

Date 2011-11-14

DSND S.W. SEO

CHKD S. J. RA

CHKD O. J. KIM

APPD J. H. KIM

Note: Others not mentioned in this data sheet shall be in accordance with maker standard. Above technical data are only design values and shall be guaranteed with tolerance of applicable standard. Inspection and performance test shall be maker standard, if not mentioned. * In case of Inverter-Fed Motor, performance data is based on sine wave tests. ** Data is based on when the motor is supplied at rated voltage & frequency. and the data is expressed as

Documents

Wtb- Centrifugal Piump Opab1-h1326 Sur-V-00gb-1!74!001ifc r1 1