Upload
others
View
8
Download
2
Embed Size (px)
Citation preview
SUPPLIERS OF WROUGHT IRON & CAST STEEL COMPONENTS & PRODUCTS
REG NO 2014/011602/07
VOLUME 4
C ATA LO G U EWROUGHT IRON
IndexClick on the headings below to be directed to the individual sections of the catalogue:
Twisted Bar- Twisted Square Bar
- Twisted Flat Bar
- Twisted Rope Bar
Scrolls- Equal End S-scrolls
- Unequal End S-scrolls
- Round Back Scrolls
- Flat Back Scrolls
- Half Scrolls
- Belly Scrolls
- Leaf Scrolls
- Assembled Scrolls
- Pressed Scrolls
- Drawn Scrolls
- Diamonds
Budget Scrolls- Equal End S-scrolls
- Unequal End S-scrolls
- Round Back Scrolls
- Flat Back Scrolls
- Half Scrolls
- Belly Scrolls
Spanish Bars
Rings
Product Info
Baskets- Baskets/Onions
- Basket Pickets
Forgings- Forged Centre Pieces
- Forged Pickets
Material Chart
IndexClick on the headings below to be directed to the individual sections of the catalogue:
Bars & Tubes- Grecian Bar
- Stemming
- Wave Bar
- Dungeon Weave
- Grecian Flat Bar
- Florentina
- Grecian Tube
- Hammered Tube
- Twisted Tube
- Pressed Tube
06
07-08
09-12 09 11
19-32 20 21 23 25 25 26 2729 30 31 32
33-40 34 35 37 39 39 40
13-1813 13
41-42
43-44
45-46454546
47-4847474747474848484848
Handrail & Ends- Drawn Handrail
- Banister End Curls
49-50 49 50
Post Tops & Newel Balls- Steel Pyramid Caps
- Steel Newel Balls
- Steel Post Tops
- Cast Iron Pyramid Caps
- Cast Iron Newel Balls
- Cast Iron Post Tops
51-5251 51 51 52 52 52
Pole Caps- Flat Discs
- Round Dome Caps
- Pyramid Caps
53 53 53 53
Balls- Solid Balls
- Hollow Balls
- Hemispheres (Half Balls)
5454 54 54
01 02
Product Description Page NoProduct Description Page No
Panels- Cast Steel Panel
- Mild Steel Panels
107-122101122
Garden Accessories 123-124
Brackets 106
Gate Toppers 125-126
PLEASE NOTE
We manufacture all mild steel (wrought iron) Scrolls; Rings; Rosettes; Panels and Pickets on site,
and therefore we can manufacture custom made products on request.
Fancy finishes on plain material such as twisting, hammering, patterning, grecian edging, flaring, etc
can also be done. When ordering any mild steel items, please keep in mind that you can request any
of these finishes to be added to the product.
On average, we offer lead times of 3-5 working days, depending on the size of your order as well as
amount of work in the queue for the workshop, but we often get the work out sooner that that. To
be safe we usually ask that you work on a 7-10 working days lead time when planning jobs for your
customers as we are also dependant on suppliers of raw materials.
We do however try to keep as much stock as possible in the shop of the most popular items so that
these can simply be purchased off the shelves.
Collars- Steel Collars
- Cast Iron Collars
73-787377
Spears- Steel Spears
- Cast Iron Spears
79-8379 81
Cast Iron- Accessories
- Rosettes
- Trimmings
- Panels
84-10084858791
Rosettes- Cast Steel Rosettes
- Cast Steel Panel
- Mild Steel Rosettes
101-105101101103
IndexClick on the headings below to be directed to the individual sections of the catalogue:
IndexClick on the headings below to be directed to the individual sections of the catalogue:
Product Description Page No
Buckling- Bandage Material
- Buckles
Door Handles 59
606060
Palisade- Assegai
- Trident
- 5 Spike
- 7 Spike
- Razor Comb
61-626161616162
Leaves & Flowers- Rose Leaves & Roses
- Grapes & Grape Vines
- Daisy Flowers
- St Joseph & Arum Lillies
- Left & Right Sets
- Solandra Leaves
- Fern & Thistle Leaves
- Single Leaves
- Butterflies
63-72636465666769707172
Product Description Page No
Plates- Square Mounting Plates
- Round Mounting Plates
- Shaped Mounting Plates
- Wall Plates
- Plain Base Plates
- Foot Plates
- Decorative Plates
55-5855 55 5556 56 57 58
03 04
Collars- Steel Collars
- Cast Iron Collars
P B Plain Bar P T Plain TubeH B Hammered BarH T Hammered TubeT B Twisted Bar
Material Chart
PB
PT
HB
HT
TB
SQUARE BAR
DECORATION CODES
FLAT BAR
I 12 x 6mm J 16 x 6mmK 20 x 6mmL 20 x 8mmM 25 x 6mmN 25 x 8mmO 30 x 6mmP 30 x 8mmQ 40 x 6mmR 40 x 8mm
A 8mm B 10mmC 12mmD 16mm
ROUND BAR
E 8mm F 10mmG 12mmH 16mm
BUDGET FLAT BAR
S 12 x 3mm T 16 x 3mmU 20 x 3mmV 25 x 3mmW 30 x 3mmX 40 x 3mmY 50 x 3mm
P L E A S E N OT E When placing an order or requesting prices, be sure to indicate the material type that you would like the item to be manufactured in.
Refer to the lists above.
When 6mm material thickness is not available at the time when you request a quote or place an order, the item will quoted and/or made in a 5mm thick material instead.
05 06
Product Information
Wrought Iron or Mild Steel
The word “wrought” is an archaic past participle of the verb “to work,” and so “wrought iron” literally means “worked iron”. Wrought iron is a general term for the commodity, but is also used more specifically for finished iron goods, as manufactured by a blacksmith. Wrought iron originally was an iron alloy with a very low carbon content in contrast to cast iron, and has fibrous inclusions known as slag inclusions which gives it a ‘grain’ that is visible when it is etched or bent to the point of failure.
Wrought iron is very tough, malleable, ductile, corrosion resistant and very easily welded. Wrought iron is no longer produced on a commercial scale. Many products described as wrought iron, such as guard rails, garden furniture, panels and gates are made of mild steel. They retain that description because in the past they were wrought (worked) by hand.
Cast Iron
Cast iron, unlike wrought iron, is brittle and cannot be worked either hot or cold, and can break if struck with a hammer. Cast iron is iron or a ferrous alloy which has been heated until it liquifies, and is then poured into a mould to solidify.
It is made by re-melting pig iron, often along with substantial quantities of scrap iron, scrap steel, lime stone, carbon and taking various steps to remove undesirable contaminants. The alloy constituents affect its colour when fractured. White cast iron has carbide impurities which allow cracks to pass straight through while grey cast iron has graphite flakes which deflect a passing crack and initiate countless new cracks as the material breaks. Grey cast iron has less tensile strength and shock resistance than steel, but its compressive strength is comparable to low and medium carbon steel.
Cast Steel
Cast steel was the first type of steel that allowed alloys to the added to the iron. Prior to this method, manufacturers had not been able to get steel hot enough to melt. Melting allowed other elements, such as nickel, to be mixed into the metal, thus strengthening the steel.
Steel casting is a specialised form of casting involving various types of steel. Steel castings are used when cast irons cannot deliver enough strength or shock resistance. Cast steel allows for a more uniform composition of, and fewer impurities in, steel than any previous manufacturing process. Steel is made by combining iron with carbon or other alloys. Iron is a soft metal, so not ideal for many construction purposes. The creation of steel removes many of the impurities in iron, which allows steel to be harder and more durable.
Drop Forged / Die Forged Steel
Drop forging is a process that gradually shapes a heated piece of metal, called an ingot. It involves forming the ingot with repeated blows from a hammer or die that is raised and then dropped onto the component, flattening it or forcing it into a mould. Depending on the complexity of the component’s design, the process sometimes requires using several dies in progression. The drop forging process usually produces a very close approximation of the finished piece.
Forging is generally accepted to produce finished items of a better quality due to the inherent lack of imperfections in the steel structure found with other fabrication methods.
Forging is one of the oldest metal forming methods and involves repetitive manual and powered impact to force red hot steel into a certain final shape. Manual forging is carried out by a blacksmith using smaller, handheld hammers, tongs and chisels with the hammering typically taking place on an anvil.
Forged carbon steel parts are usually believed to be superior to those made by other methods such as casting. This is due to the fact that the hammering of the metal during forming eliminates most of the microscopic crystalline flaws, such as air bubbles and fissures, which characterise cast components.
Pressed Steel
Cold-formed steel is not formed with heat, like most other steels; instead, it is formed with rollers and presses to make it the correct size and shape. This results in cold-formed steel being lighter than other steels, and it tends to have somewhat more elasticity.
Cold-formed steel starts as plates of steel that are rolled and stamped until the plates are the correct size and shape. The rollers thin out the steel, so it can be easily bent, and the presses add curves and lines so the steel takes on the intended shape. While the process is not entirely cold, because the presses and rollers cause heat by friction and movement, the heat is not enough to melt or deform the steel without additional pressure.
Galvanising
When a product will get in contact with moisture it needs to be galvanised in order to protect it from corroding. The steel gets coated in layers of molten zinc oxide as this protective metal does not easily rust. The coating also gives the steel a more durable, hard to scratch finish that many people find attractive. For countless outdoor, marine, or industrial applications, galvanised steel is an essential fabrication component.
When steel is submerged in melted zinc, a chemical reaction permanently bonds the zinc to the steel. Therefore, the zinc isn’t exactly a sealer, like paint, because it doesn’t just coat the other metal; it permanently becomes a part of it. The most external layer is all zinc, but successive layers are a mixture of zinc and iron, with an interior of pure steel.
Powder Coating
Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a “skin”. It is usually used to create a hard finish that is tougher than conventional paint.
Because powder coating does not have a liquid carrier, it can produce thicker coatings than conventional liquid coatings without running or sagging, and powder coating produces minimal appearance differences between horizontally coated surfaces and vertically coated surfaces.
07 08
09 10
B 08 SFit 8mm squareDim 40 x 85mm Material: Square
B 12 ML Fit 12mm squareDim 60 x 175mm
B 12 MS Fit 12mm squareDim 55 x 85mm
B 12 MM Fit 12mm squareDim 60 x 135mm
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Basket OnionsBasket Onions
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Fits 8mm Fits 10mm
Fits 12mm
4 SPINE BASKETS
B 08 SLFit 8mm squareDim 30 x 90mm Material: Square
B 08 SLLFit 8mm square
Dim 30 x 100mm Material: Square
B10SPFit 10mm squareDim 35 x 80mm Material: Square
B10SFit 10mm squareDim 55 x 110mm Material: Square
B10SLFit 10mm squareDim 25 x 90mm Material: Square
B 12 BFit 12mm squareDim 45 x 80mm Material: Square
B 12 BRFit 12mm squareDim 45 x 80mm Material: Round
B 12 RFit 12mm squareDim 50 x 120mm Material: Round
B 12 SFit 12mm squareDim 60 x 130mm Material: Square
B 12 HFit 12mm squareDim 40 x 155mm Material: Square
Fits 12mm
8 SPINE BASKETS
Fits 20mm
B 16 MSFit 15mm squareDim 70 x 100mm Material: Square
B 16 MLFit 15mm squareDim 70 x 175mm Material: Square
B 16 SFit 16mm squareDim 75 x 160mm Material: Square
B 16 RFit 16mm squareDim 75 x 165mm Material: Round
B 20 MRFit 18mm squareDim 75 x 120mm Material: Round
B 20 MLFit 18mm squareDim 75 x 240mm Material: Square
B 20 RFit 20mm squareDim 70 x 170mm Material: Round
B 20 MSFit 18mm squareDim 85 x 120mm Material: Square
B 20 SFit 20mm squareDim 85 x 175mm Material: Square
B 20 MLRFit 18mm squareDim 85 x 250mm Material: Round
B 24 SFit 24mm squareDim 90 x 175mm Material: Square
B 24 MLFit 24mm squareDim 85 x 240mm Material: Square
B 24 MLXFit 24mm squareDim 125 x 240mm Material: Square
B 24 RFit 24mm squareDim 90 x 175mm Material: Round
Fits 24mmFits 20mmFits 16mm
Fits 16mm
Fits 24mm
6 SPINE ONION BALLS
60 BALDia 60mm
Material: Square
80 BALDia 80mm
Material: Square
90 BAL PDia 90mm
Material: Square
65 BAL RDia 65mm
Material: Round
11 12
BP 07 T Single Basket
BP 08 T Double Basket
BP 09 T Single Basket
BP 10 T Double Basket
BP 11 T Single Basket
BP 12 T Double Basket
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Basket PicketsBasket Pickets
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
BP 01 T Single Basket
B 12 S BASKET
PB PLAIN BAR
PT PLAIN TUBE
HB HAMMERED BAR
HT HAMMERED TUBE
TB TWISTED BAR
HB HT TB
12mm SQUARE BAR OR TUBE
BP 02 T Double Basket
16mm SQUARE BAR OR TUBE 25mm SQUARE BAR OR TUBE
20mm SQUARE BAR OR TUBE
Select any basket and material in a matching size to create a single or
double basket picket.
Indicate material when ordering.Material options listed above.
TBTB
Size 60 x 1000mm
BP 03 T Single Basket
B 12 ML BASKET
BP 04 T Double Basket
TBTB
Size 60 x 1000mm
BP 05 T Single Basket
B 12 MS BASKET
BP 06 T Double Basket
TBTB
Size 55 x 1000mm
TBTB
Size 75 x 1000mm
TBTB
Size 70 x 1000mm
TBTB
Size 75 x 1000mm
B 16 S BASKET
B 16 ML BASKET
B 16 MS BASKET
PLEASE NOTE:When request prices, indicate if you want the pickets in plain or twisted bar
as the picket material will affect the price.
BP 13 T Single Basket
B 20 S BASKET
BP 14 T Double Basket
TBTB
Size 85 x 1000mm
BP 15 T Single Basket
B 20 ML BASKET
BP 16 T Double Basket
TBTB
Size 75 x 1000mm
BP 17 T Single Basket
B 20 MS BASKET
BP 18 T Double Basket
TBTB
Size 85 x 1000mm
BP 19 T Single Basket
BP 20 T Double Basket
BP 21 T Single Basket
BP 22 T Double Basket
TBTB
Size 90 x 1000mm
TBTB
Size 85 x 1000mm
B 24 S BASKET
B 24 MLBASKET
10
12
16
20
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
ForgingsForgings
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
FORGED PICKETS (FP) & FORGED CENTRE PIECES (FCP)
FCP 01 S20mm x 150mm Fits 10mm sq bar
FORGED PICKETS (FP) & FORGED CENTRE PIECES (FCP)
R
SFITS SQUARE BAR
FITS ROUND BAR
FCP 02 S 25mm x 150mm Fits 12mm sq bar
FCP 03 S 30mm x 150mm Fits 16mm sq bar
FCP 04 S 40mm x 150mm
Fits 20mm sq bar
FP 01 SS 20mm x 1000mm
10mm sq bar
SINGLE
FP 02 SS 25mm x 1000mm
12mm sq bar
FP 03 SS 30mm x 1000mm
16mm sq bar
FP 04 SS 40mm x 1000mm
20mm sq bar
10
12
16
20
FP 01 SD 20mm x 1000mm
10mm sq bar
FP 02 SD 25mm x 1000mm
12mm sq bar
FP 03 SD 30mm x 1000mm
16mm sq bar
FP 04 SD 40mm x 1000mm
20mm sq bar
DOUBLE
FOR
GE
D P
ICK
ETS
(S
ING
LE &
DO
UB
LE)
FOR
GE
D C
EN
TR
E P
IEC
E -
SQ
UA
RE
10
12
16
20
FCP 01 R20mm x 150mm
Fits 10mm round bar
FCP 02 R 25mm x 150mm
Fits 12mm round bar
FCP 03 R 30mm x 150mm
Fits 16mm round bar
FCP 04 R 40mm x 150mm
Fits 20mm round bar
FP 01 RS 20mm x 1000mm 10mm round bar
SINGLE
FP 02 RS 25mm x 1000mm 12mm round bar
FP 03 RS 30mm x 1000mm 16mm round bar
FP 04 RS 40mm x 1000mm 20mm round bar
FP 01 RD 20mm x 1000mm 10mm round bar
FP 02 RD 25mm x 1000mm 12mm round bar
FP 03 RD 30mm x 1000mm 16mm round bar
FP 04 RD 40mm x 1000mm 20mm round bar
DOUBLE
FOR
GE
D P
ICK
ETS
(S
ING
LE &
DO
UB
LE)
FOR
GE
D C
EN
TR
E P
IEC
E -
RO
UN
D
10
12
16
20
10
12
16
20
FCP 05 S25mm x 50mm
Fits 10mm sq bar
FCP 06 S 30mm x 70mm
Fits 12mm sq bar
FCP 07 S 30mm x 70mm
Fits 16mm sq bar
FCP 08 S 40mm x 80mm
Fits 20mm sq bar
FP 05 SS 25mm x 1000mm
10mm sq bar
SINGLE
FP 06 SS 30mm x 1000mm
12mm sq bar
FP 07 SS 30mm x 1000mm
16mm sq bar
FP 08 SS 40mm x 1000mm
20mm sq bar
10
12
16
20
FP 05 SD 25mm x 1000mm
10mm sq bar
FP 06 SD 30mm x 1000mm
12mm sq bar
FP 07 SD 30mm x 1000mm
16mm sq bar
FP 08 SD 40mm x 1000mm
20mm sq bar
DOUBLE
FOR
GE
D P
ICK
ETS
(S
ING
LE &
DO
UB
LE)
FOR
GE
D C
EN
TR
E P
IEC
E -
SQ
UA
RE
10
12
16
20
FCP 05 R25mm x 50mm
Fits 10mm round bar
FCP 06 R 30mm x 70mm
Fits 12mm round bar
FCP 07 R 30mm x 70mm
Fits 16mm round bar
FCP 08 R 40mm x 80mm
Fits 20mm round bar
FP 05 RS 25mm x 1000mm 10mm round bar
SINGLE
FP 06 RS 30mm x 1000mm 12mm round bar
FP 07 RS 30mm x 1000mm 16mm round bar
FP 08 RS 40mm x 1000mm 20mm round bar
FP 05 RD 25mm x 1000mm 10mm round bar
FP 06 RD 30mm x 1000mm 12mm round bar
FP 07 RD 30mm x 1000mm 16mm round bar
FP 08 RD 40mm x 1000mm 20mm round bar
DOUBLE
FOR
GE
D P
ICK
ETS
(S
ING
LE &
DO
UB
LE)
FOR
GE
D C
EN
TR
E P
IEC
E -
RO
UN
D
10
12
16
20
13 14
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
ForgingsForgings
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
FORGED PICKETS (FP) & FORGED CENTRE PIECES (FCP)
FCP 09 S35mm x 110mm
Fits 12mm sq bar
FORGED PICKETS (FP) & FORGED CENTRE PIECES (FCP)
R
SFITS SQUARE BAR
FITS ROUND BAR
FCP 10 S 40mm x 110mm
Fits 16mm sq bar
FP 09 SS 35mm x 1000mm
12mm sq bar
SINGLE
FP 10 SS 40mm x 1000mm
16mm sq bar
12
16
FP 09 SD 35mm x 1000mm
12mm sq bar
FP 10 SD 40mm x 1000mm
16mm sq bar
DOUBLE
FOR
GE
D P
ICK
ETS
(S
ING
LE &
DO
UB
LE)
FOR
GE
D C
EN
TR
E P
IEC
E -
SQ
UA
RE
12
16
FCP 09 R35mm x 110mm
Fits 12mm round bar
FCP 10 R 40mm x 110mm
Fits 16mm round bar
FP 09 RS 35mm x 1000mm 12mm round bar
SINGLE
FP 10 RS 40mm x 1000mm 16mm round bar
FP 09 RD 35mm x 1000mm 12mm round bar
FP 10 RD 40mm x 1000mm 16mm round bar
DOUBLE
FOR
GE
D P
ICK
ETS
(S
ING
LE &
DO
UB
LE)
FOR
GE
D C
EN
TR
E P
IEC
E -
RO
UN
D
12
16
12
16
FCP 11 S32mm x 125mm
Fits 12mm sq bar
FCP 12 S 38mm x 125mm
Fits 16mm sq bar
FP 11 SS 32mm x 1000mm
12mm sq bar
SINGLE
FP 12 SS 38mm x 1000mm
16mm sq bar
12
16
FP 11 SD 32mm x 1000mm
12mm sq bar
FP 12 SD 38mm x 1000mm
16mm sq bar
DOUBLE
FOR
GE
D P
ICK
ETS
(S
ING
LE &
DO
UB
LE)
FOR
GE
D C
EN
TR
E P
IEC
E -
SQ
UA
RE
12
16
FCP 11 R32mm x 125mm
Fits 12mm round bar
FCP 12 R 38mm x 125mm
Fits 16mm round bar
FP 11 RS 32mm x 1000mm 12mm round bar
SINGLE
FP 12 RS 38mm x 1000mm 16mm round bar
FP 11 RD 32mm x 1000mm 12mm round bar
FP 12 RD 38mm x 1000mm 16mm round bar
DOUBLE
FOR
GE
D P
ICK
ETS
(S
ING
LE &
DO
UB
LE)
FOR
GE
D C
EN
TR
E P
IEC
E -
RO
UN
D
12
16
12
16
15 16
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
ForgingsFORGED PICKETS (FP) & FORGED CENTRE PIECES (FCP)
Forgings
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
FORGED PICKETS (FP) & FORGED CENTRE PIECES (FCP)
FCP 13 S35mm x 110mm
Fits 12mm sq bar
R
SFITS SQUARE BAR
FITS ROUND BAR
FCP 14 S 40mm x 110mm
Fits 16mm sq bar
FP 13 SS 35mm x 1000mm
12mm sq bar
SINGLE
FP 14 SS 40mm x 1000mm
16mm sq bar
12
16
FP 13 SD 35mm x 1000mm
12mm sq bar
FP 14 SD 40mm x 1000mm
16mm sq bar
DOUBLE
FOR
GE
D P
ICK
ETS
(S
ING
LE &
DO
UB
LE)
FOR
GE
D C
EN
TR
E P
IEC
E -
SQ
UA
RE
12
16
FCP 13 R35mm x 110mm
Fits 12mm round bar
FCP 14 R 40mm x 110mm
Fits 16mm round bar
FP 13 RS 35mm x 1000mm 12mm round bar
SINGLE
FP 14 RS 40mm x 1000mm 16mm round bar
FP 13 RD 35mm x 1000mm 12mm round bar
FP 14 RD 40mm x 1000mm 16mm round bar
DOUBLE
FOR
GE
D P
ICK
ETS
(S
ING
LE &
DO
UB
LE)
FOR
GE
D C
EN
TR
E P
IEC
E -
RO
UN
D
12
16
12
16
FCP 15 S 45mm x 110mm
Fits 20mm sq bar
FP 15 SS 45mm x 1000mm
20mm sq bar 20
FP 15 SD 45mm x 1000mm
20mm sq bar 20
FCP 15 R 45mm x 110mm
Fits 20mm round bar
FP 15 RS 45mm x 1000mm 20mm round bar
FP 15 RD 45mm x 1000mm 20mm round bar
2020
FCP 16 S25mm x 110mm
Fits 12mm sq bar
FCP 17 S 35mm x 110mm
Fits 16mm sq bar
FP 16 SS 25mm x 1000mm
12mm sq bar
SINGLE
FP 17 SS 35mm x 1000mm
16mm sq bar
12
16
FP 16 SD 25mm x 1000mm
12mm sq bar
FP 17 SD 35mm x 1000mm
16mm sq bar
DOUBLE
FOR
GE
D P
ICK
ETS
(S
ING
LE &
DO
UB
LE)
FOR
GE
D C
EN
TR
E P
IEC
E -
SQ
UA
RE
12
16
10
12
16
20
FCP 18 R20mm x 150mm
Fits 10mm round bar
FCP 19 R 25mm x 150mm
Fits 12mm round bar
FCP 20 R 30mm x 150mm
Fits 16mm round bar
FCP 21 R 40mm x 150mm
Fits 20mm round bar
FP 18 RS 20mm x 1000mm 10mm round bar
SINGLE
FP 19 RS 25mm x 1000mm 12mm round bar
FP 20 RS 30mm x 1000mm 16mm round bar
FP 21 RS 40mm x 1000mm 20mm round bar
FP 18 RD 20mm x 1000mm 10mm round bar
FP 19 RD 25mm x 1000mm 12mm round bar
FP 20 RD 30mm x 1000mm 16mm round bar
FP 21 RD 40mm x 1000mm 20mm round bar
DOUBLE
FOR
GE
D P
ICK
ETS
(S
ING
LE &
DO
UB
LE)
FOR
GE
D C
EN
TR
E P
IEC
E -
RO
UN
D
10
12
16
20
17 18
19 20
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
ScrollsScrolls
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Scrolls, Rosettes and Panels can be made from a variety of materials.
Select which material you would like the items to be made from when requesting quotes. The price of the item will be determined by the material used. Refer to this table for the relevant letter to be added to the code.
The letters in round grey circles underneath the size description of each scroll indicates from which material the item can be manufactured.
Leaf scrolls can made as Left-facing or Right-facing, depending on the leaves used. Ensure that you also indicate this when ordering leaf scrolls. We do manufacture custom made items, so if you prefer to use a different leaf than that which we have used, you are welcome to select one from our range of leaves and we will quote you
on the customised item accordingly.
Scrolls, Rosettes and Panels can also be made from plain or hammered material, depending on the size of the scroll and material selected. Contact us for more information.
IMPORTANT TO KNOW
All scrolls are made from mild steel and are purchased from various suppliers. Every batch of material is different to the next and each will have a different ‘kick-back’ reaction when being bent into scrolls.
Therefore, the measurements for scrolss can not be quaranteed to be exactly 100% as per the measurements given in this catalogue.
There will also be a slight variant in measurement as scrolls are made with the same tools accross various materials. Therefore the measurements given here are for the 12x6mm material,
and you should keep in mind that scrolls made from the heavier material such as 12 square or 16 square will be slightly bigger in size.
MATERIALS Square bar A 8mm B 10mm C 12mm D 16mm
LF
Round bar E 8 mm F 10 mm G 12 mm H 16 mm
N 25x8mm O 30x6mm P 30x8mm Q 40x6mm R 40x8mm
MATERIALS Flat bar 12x6mm J 16x6mm K 20x6mm L 20x8mm M 25x6mm
Left Facing Scroll RF Right Facing Scroll H Hammered Scroll
PLEASE NOTE S-SCROLLS - EQUAL END (SE)
SE 0155 x 150mm
SE 0265 x 200mm
SE 0390 x 260mm
260
90
200
65
150
55
SE 04120 x 300mm
120
300
CUSTOM MADE SIZES Custom made sizes can be done. Contact us for a quotation on the specific size that you are
interested in purchasing.
SE 07170 x 450mm
170
SE 05130 x 300mm
130
360
SE 06170 x 400mm
170
400450
SE 08150 x 600mm
150
600
21 22
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATEI M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
ScrollsScrollsS-SCROLLS - UNEQUAL END (SU)S-SCROLLS - UNEQUAL END (SU)
SU 0560 x 445 x 105mm
60
105
445
60
SU 0460 x 345 x 100mm
100
345
SU 0355 x 300 x 100mm
300
55
100
SU 0245 x 200 x 100mm
200
100
45
SU 0135 x 160 x 80mm
160
80
35
SU 11100 x 410 x 200mm
200
410
100
95
SU 10100 x 410 x 200mm
200
410
100
SU 12100 x 460 x 200mm
200
460
100
SU 08100 x 485 x 190mm
100
190
485
SU 0995 x 550 x 210mm
550
95
210
SU 06110 x 600 x 190mm
600
110
190
SU 07110 x 495 x210mm
495
210
110
SU 13110 x 850 x 220mm
850
220
110
SU 14110 x 850x 260mm
850
260
110
A B C
L M N O
Square
E F G
I J KFlat Bar
P
Round
AVAILABLE MATERIALS
These scrolls can be made from the material options listed below. The sizes indicated areonly approximate as
different material sizes respond differentlywhen being scrolled.
There will be a slight variation in size depending on the material size used when manufactured.
PLEASE NOTE
23 24
250
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
ScrollsScrollsC-SCROLLS - ROUND BACK (RB)C-SCROLLS - ROUND BACK (RB)
125
280
300350
170 140
RB 06170 x 280mm
RB 07140 x 300mm
RB 08250 x 350mm
200
135
RB 09135 x 200mm
125150
250
100
250
12570 8065
RB 0165 x 100mm
RB 0270 x 125mm
RB 0380 x 150mm
RB 04125 x 250mm
150
RB 05150 x 250mm
160
RB 10160 x 330mm
330
180
RB 11180 x 400mm
400
200
RB 12200 x 300mm
320
RB 13320 x 480mm
480
300
A B C L M N OSquare
E F G I J KFlat Bar
PRound
These scrolls can be made from the material options listed below.The sizes indicated are only approximate as different material sizes respond differently when being scrolled.
There will be a slight variation in size depending on the material size used when manufactured.
PLEASE NOTE
AVAILABLE MATERIALS
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
25 26
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
ScrollsScrollsC-SCROLLS - BELLY (BS)C-SCROLLS - FLAT BACK (FBS)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
A B C L M N OSquare
E F G I J KFlat Bar
PRound
AVAILABLE MATERIALS
165
100
BS 02100 x 165mm
375
160
BS 04160 x 375mm
300
215
BS 06215 x 300mm
BS 05235 x 565mm
235
565
300
BS 09300 x 500mm
500
250
BS 07250 x 400mm
400
80
BS 0180 x 140mm
140
330
180
BS 03180 x 330mm
120
BS 08120 x 350mm
350
FBS 0170 x 130mm
FBS 0270 x 160mm
FBS 0370 x 220mm
FBS 0470 x 410mm
130 160220
410
70707070
HALF SCROLLS (HS)
HS 0170 x 220mm
HS 02110 x 250mm
HS 03150 x 300mm
HS 04200 x 500mm
200
150
110
70
220 250
300
500
A B C L M N OSquare
E F G I J KFlat Bar
PRound
AVAILABLE MATERIALS
A B C L M N OSquare
E F G I J KFlat Bar
PRound
AVAILABLE MATERIALS
27 28
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
ScrollsScrolls
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
LEAF SCROLLS (LS)PLEASE NOTE
LS 05 (LF & RF)Dim 140 x 300mm
LS 06 (LF & RF)Dim 140 x 340mm
I
LS 07 (LF & RF)Dim 140 x 420mm
LS 03 (LF & RF)Dim 150 x 340mm
I
LS 04 (LF & RF)Dim 150 x 430mm
Left Facing (LF)
Right Facing (RF)
Left Facing (LF)
Right Facing (RF)
Left Facing (LF)
Right Facing (RF)
I
LS 08 (LF & RF)Dim 210 x 335mm
LS 09 (LF & RF)Dim 140 x 210mm
LS 10 (LF & RF)Dim 160 x 260mm
LS 11 (LF & RF)Dim 170 x 310mm
Left Facing (LF)
Right Facing (RF)
Scrolls, Rosettes and Panels can be made from a variety of materials.
Select which material you would like the items to be made from when requesting quotes. The price of the item will be determined by the material used. Refer to this table for the relevant letter to be added to the code.
The letters in round grey circles underneath the size description of each scroll indicates from which material the item can be manufactured.
Leaf scrolls can made as Left-facing or Right-facing, depending on the leaves used. Ensure that you also indicate this when ordering leaf scrolls. We do manufacture custom made items, so if you prefer to use a different leaf than that which we have used, you are welcome to select one from our range of leaves and we will quote you
on the customised item accordingly.
Scrolls, Rosettes and Panels can also be made from plain or hammered material, depending on the size of the scroll and material selected. Contact us for more information.
IMPORTANT TO KNOW
All scrolls are made from mild steel and are purchased from various suppliers. Every batch of material is different to the next and each will have a different ‘kick-back’ reaction when being bent into scrolls.
Therefore, the measurements for scrolss can not be quaranteed to be exactly 100% as per the measurements given in this catalogue.
There will also be a slight variant in measurement as scrolls are made with the same tools accross various materials. Therefore the measurements given here are for the 12x6mm material,
and you should keep in mind that scrolls made from the heavier material such as 12 square or 16 square will be slightly bigger in size.
LS 12 (LF & RF)
Left Facing (LF)
Right Facing (RF)
B C F G I J
Dim 200 x 400mm
LS 13(Double Sided)
B C F G I J
Dim 150 x 500mm
B C F G I J
B C F G I
LS 01Dim 310 x 500mm
B C F G I
LS 02 (LF & RF)Dim 250 x 490mm
Left Facing (LF)
Right Facing (RF)
Left Facing (LF)
Right Facing (RF)
ScrollsASSEMBLED SCROLLS (AS)
480
170
300
170
350
250
360
85
510
310
AS 01Dim 480 x 170mm
J K
AS 02Dim 300 x 170mm
AS 03Dim 350 x 250mm
AS 04Dim 360 x 85mm
J
B
AS 05Dim 510 x 310mm
C F G I
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Scrolls
425
125
PRESSED SCROLLS (PS)
425
250
500
150
500
150
250
100
250
200
PS 01Dim 125 x 425mm
I J K M
Single Scroll
PS 02Dim 125 x 425mm
Double Scroll
PS 03Dim 150 x 500mm
Double Scroll
PS 04Dim 150 x 500mm
Double Scrollwith leaves
PS 06Dim 200 x 250mm
Double Scroll
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
PS 05Dim 100 x 250mm
Single Scroll
I J K M
B C E F I J K
350 360
510
B C F G IB C F G I
B C F G I J KB C F G I
I J K M
I J K M
B C E F I J K
510
150
B
AS 06Dim 150 x 430mm
C F G I
430
29 30
31 32
Scrolls
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Scrolls
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
DRAWN SCROLLS
180
105
150
100
CODES BC 10 S BC 12 S BC 16 S
MATERIALSFits - Square Bar10mm square 12mm square16mm square
PT 1
BISHOP
150
160
80
130
10mm ROUND
CODES BC 10 R BC 12 R BC 16 R
MATERIALSFits - Round Bar10mm round 12mm round16mm round
CODES SHC 10 S SHC 12 S SHC 16 S
MATERIALSFits - Square Bar10mm square 12mm square16mm square
SHEPHERD
CODES SHC 10 R SHC 12 R SHC 16 R
MATERIALSFits - Round Bar10mm round 12mm round16mm round
PIG’s TAIL
Dim 65 x 90mm
PT 212mm ROUNDDim 75 x 100mm
PT 316mm ROUNDDim 80 x 130mm
CODES SN 12 R SN 16 R
MATERIALSFits - Round Bar12mm round 16mm round
SNAIL
CODES DR 01
MATERIALSFlat Bar12x6mm flat bar
DRAWN RING
205
75
100
65
90
PRESSED DIAMONDS (PD)
Although the above listed Pressed Diamonds are made from a 12x6mm and 16x6mm flat bar, you are welcome to contact us if you need the same or similar diamond shaped design in a different material.
We will be able to inform you if it can be done in whatever other material you have in mind.
MATERIALS Square bar A 8mm B 10mm C 12mm D 16mm
LF
Round bar E 8 mm F 10 mm G 12 mm H 16 mm
N 25x8mm O 30x6mm P 30x8mm Q 40x6mm R 40x8mm
MATERIALS Flat bar 12x6mm J 16x6mm K 20x6mm L 20x8mm M 25x6mm
Left Facing Scroll RF Right Facing Scroll T Tubed Scroll H Hammered Scroll
PD 01Dim 90 x 130mm
I J
PD 02Dim 90 x 220mm
I J
PD 03Dim 120 x 160mm
I J
90
90
120
130
220
160
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
BUDGET S-SCROLLS - EQUAL END (SE)
Budget ScrollsBudget Scrolls
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
WHY USE BUDGET SCROLLS
We have developed this range of cheaper scrolls for those customers that would like to add some decorative design detail to their homes without wanting to spend too much money.
These scrolls are an excellent alternative to our regular range of scrolls and can be done in the same sizes.Although the budget scrolls will mainly be used inside the home as decoration for staircases, interior gates,
wall decoration, room dividers, and so forth, it can also be used outside as a security option.
In this case it will have to be welded together in a few more places to strengthen it as the material thickness is 3mm. An added bonus for your customer is that he/she will save quite a bit on galvanising
cost as these materials weigh less than the other materials listed under A - R in our material chart.
HOW TO GO ABOUT ORDERING
Select which material you would like the items to be made from when requesting quotes. The price of the item will be determined by the material used. Refer to this table for the relevant letter to be added to the code.
We do manufacture custom made items, so if you prefer to use a different size scroll than that which we have used, you are welcome to contact us so that we can quote you on the customised item accordingly.
IMPORTANT TO KNOW
All scrolls are made from mild steel and are purchased from various suppliers. Every batch of material is different to the next and each will have a different ‘kick-back’ reaction when being bent into scrolls.
Therefore, the measurements for scrolss can not be quaranteed to be exactly 100% as per the measurements given in this catalogue.
PLEASE NOTE
Save on galvanising cost by going lighter on material - see table above for available sizes
MATERIALS Flat bar S 12x3mm T 16x3mm U 20x3mm V 25x3mm W 30x3mm X 40x3mm Y 50x3mm T Please Note:Scroll ends are notflared / fish tailed
SE 0155 x 150mm
SE 0265 x 200mm
SE 0390 x 260mm
260
90
200
65
150
55
SE 05130 x 300mm
130
360These scrolls can be made from the material options
listed below. No fishtail on scroll ends.
The sizes indicated are only approximate as different material sizes respond differently when being scrolled.
There will be a slight variation in size depending on the material size used when manufactured.
PLEASE NOTE
AVAILABLE MATERIALSSE 06
170 x 400mm
170
400
SE 04120 x 300mm
120
300
CUSTOM MADE SIZES Custom made sizes can be done. Contact us for a quotation on the specific size that
you are interested in purchasing.
SFlat Bar
T U V W X Y
33 34
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
BUDGET S-SCROLLS - UNEQUAL END (SU) BUDGET S-SCROLLS - UNEQUAL END (SU)
Budget ScrollsBudget Scrolls
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
SU 0690 x 600 x 190mm
SU 0795 x 495 x210mm
SU 0885 x 485 x 190mm
SU 0995 x 550 x 210mm
SU 1090 x 410 x 200mm
600495
85
95
90
190210190
485
50
SU 0140 x 160 x 80mm
SU 0250 x 200 x 100mm
SU 0350 x 300 x 100mm
SU 0450 x 345 x 100mm
SU 0550 x 445 x 105mm
50
105100
445
345300
50
100
200
100
50
160
80
40
550
95
210
SU 13100 x 850 x 220mm
SU 14120 x 850x 260mm
200
410
SU 1190 x 410 x 200mm
200
410
90
SU 1290 x 460 x 200mm
200
460
90
95
850
220
850
260
90 100
120
These scrolls can be made from the material options
listed below.
The sizes indicated are only approximate as
different material sizes respond differently
when being scrolled.
There will be a slight variation in size depending
on the material size used when manufactured.
PLEASE NOTE
S
Flat Bar
AVAILABLE MATERIALS
T U V W X Y
35 36
250
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
BUDGET C-SCROLLS - ROUND BACK (RB)BUDGET C-SCROLLS - ROUND BACK (RB)
125
280
300350
170 140
RB 06170 x 280mm
RB 07140 x 300mm
RB 08250 x 350mm
200
135
RB 09135 x 200mm
125150
250
100
250
12570 8065
RB 0165 x 100mm
RB 0270 x 125mm
RB 0380 x 150mm
RB 04125 x 250mm
150
RB 05150 x 250mm
160
RB 10160 x 330mm
330
180
RB 11180 x 400mm
400
200
RB 12200 x 300mm
320
RB 13320 x 480mm
480
300
These scrolls can be made from the material options listed below.The sizes indicated are only approximate as different material sizes respond differently when being scrolled.
There will be a slight variation in size depending on the material size used when manufactured.
PLEASE NOTE
AVAILABLE MATERIALS
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Budget ScrollsBudget Scrolls
SFlat Bar
T U V W X Y
37 38
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
BUDGET C-SCROLLS - BELLY (BS)BUDGET C-SCROLLS - FLAT BACK (FBS)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
165
330 375
140
565
160100 18080
BS 0180 x 140mm
BS 02100 x 165mm
BS 03180 x 330mm
BS 04160 x 375mm
235
BS 05235 x 565mm
300
215
BS 06215 x 300mm
250
BS 07250 x 400mm
120
BS 08120 x 350mm
400
350
AVAILABLE MATERIALS
FBS 0170 x 130mm
FBS 0270 x 160mm
FBS 0370 x 220mm
FBS 0470 x 410mm
130 160220
410
70707070
BUDGET HALF SCROLLS (HS)
HS 0170 x 220mm
HS 02110 x 250mm
HS 03150 x 300mm
HS 04200 x 500mm
200
150
110
70
220 250
300
500
AVAILABLE MATERIALS
AVAILABLE MATERIALS
SFlat Bar
T U V W X Y
SFlat Bar
T U V W X Y
SFlat Bar
T U V W X Y
Budget ScrollsBudget Scrolls
39 40
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
SPANISH BARS (SB)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Spanish barsSpanish bars
750
160
750
160
750
160
750
160
850
180
850
180
SPANISH BARS (SB)
850
180
850
180
850
180
850
180
750
180
750
180
Available in all material sizesRefer to the Material Chart
CODES SB 01 - L SB 01 - N SB 01 - P SB 01 - R SB 01 - BSB 01 - CSB 01 - D SB 01 - FSB 01 - GSB 01 - H
MATERIALFLAT BAR20 x 8mm 25 x 8mm30 x 8mm40 x 8mm
SQUARE BAR 10 x 10mm12 x 12mm16 x 16mm ROUND BAR 10mm12mm16mm
SB 01Available in all material sizesRefer to the Material Chart
CODES SBC 01 - L SBC 01 - N SBC 01 - P SBC 01 - R SBC 01 - BSBC 01 - CSBC 01 - D SBC 01 - FSBC 01 - GSBC 01 - H
MATERIALFLAT BAR20 x 8mm 25 x 8mm30 x 8mm40 x 8mm
SQUARE BAR 10 x 10mm12 x 12mm16 x 16mm ROUND BAR 10mm12mm16mm
SBC 01
CODES SB 02 - BSB 02 - CSB 02 - D SB 02 - FSB 02 - GSB 02 - H
MATERIALSQUARE BAR 10 x 10mm12 x 12mm16 x 16mm ROUND BAR 10mm12mm16mm
SB 02
Available in all material sizesRefer to the Material Chart
CODES SB 03 - L SB 03 - N SB 03 - P SB 03 - R SB 03 - BSB 03 - CSB 03 - D SB 03 - FSB 03 - GSB 03 - H
MATERIALFLAT BAR20 x 8mm 25 x 8mm30 x 8mm40 x 8mm
SQUARE BAR 10 x 10mm12 x 12mm16 x 16mm ROUND BAR 10mm12mm16mm
SB 03Available in all material sizesRefer to the Material Chart
CODES SBC 03 - L SBC 03 - N SBC 03 - P SBC 03 - R SBC 03 - BSBC 03 - CSBC 03 - D SBC 03 - FSBC 03 - GSBC 03 - H
MATERIALFLAT BAR20 x 8mm 25 x 8mm30 x 8mm40 x 8mm
SQUARE BAR 10 x 10mm12 x 12mm16 x 16mm ROUND BAR 10mm12mm16mm
SBC 03
CODES SBC 02 - BSBC 02 - CSBC 02 - D SBC 02 - FSBC 02 - GSBC 02 - H
MATERIALSQUARE BAR 10 x 10mm12 x 12mm16 x 16mm ROUND BAR 10mm12mm16mm
SBC 02
Available in all material sizesRefer to the Material Chart
CODES SB 04 - L SB 04 - N SB 04 - P SB 04 - R SB 04 - BSB 04 - CSB 04 - D SB 04 - FSB 04 - GSB 04 - H
MATERIALFLAT BAR20 x 8mm 25 x 8mm30 x 8mm40 x 8mm
SQUARE BAR 10 x 10mm12 x 12mm16 x 16mm ROUND BAR 10mm12mm16mm
SB 04Available in all material sizesRefer to the Material Chart
CODES SBC 04 - L SBC 04 - N SBC 04 - P SBC 04 - R SBC 04 - BSBC 04 - CSBC 04 - D SBC 04 - FSBC 04 - GSBC 04 - H
MATERIALFLAT BAR20 x 8mm 25 x 8mm30 x 8mm40 x 8mm
SQUARE BAR 10 x 10mm12 x 12mm16 x 16mm ROUND BAR 10mm12mm16mm
SBC 04
CODES SB 05 - BSB 05 - CSB 05 - D SB 05 - FSB 05 - GSB 05 - H
MATERIALSQUARE BAR 10 x 10mm12 x 12mm16 x 16mm ROUND BAR 10mm12mm16mm
SB 05
Available in all material sizesRefer to the Material Chart
CODES SB 06 - L SB 06 - N SB 06 - P SB 06 - R SB 06 - BSB 06 - CSB 06 - D SB 06 - FSB 06 - GSB 06 - H
MATERIALFLAT BAR20 x 8mm 25 x 8mm30 x 8mm40 x 8mm
SQUARE BAR 10 x 10mm12 x 12mm16 x 16mm ROUND BAR 10mm12mm16mm
SB 06Available in all material sizesRefer to the Material Chart
CODES SBC 06 - L SBC 06 - N SBC 06 - P SBC 06 - R SBC 06 - BSBC 06 - CSBC 06 - D SBC 06 - FSBC 06 - GSBC 06- H
MATERIALFLAT BAR20 x 8mm 25 x 8mm30 x 8mm40 x 8mm
SQUARE BAR 10 x 10mm12 x 12mm16 x 16mm ROUND BAR 10mm12mm16mm
SBC 06
CODES SBC 05 - BSBC 05 - CSBC 05 - D SBC 05 - FSBC 05 - GSBC 05 - H
MATERIALSQUARE BAR 10 x 10mm12 x 12mm16 x 16mm ROUND BAR 10mm12mm16mm
SBC 05
41 42
Rings
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
RINGS
AR 42 Dia: 42mm OD
AR 65 Dia: 65mm OD
Rings
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
RINGS
PLEASE NOTE:
Sizes may vary depending on material size and the raw
material spring-back.
Custom sizes can be made on request, so contact us for
more information.
43 44
350 S 10 Dia: 350mm OD
Material: 10mm Sq Bar250 S 10
Dia: 250mm OD Material: 10mm Sq Bar
120 S 10 (Hammered) Dia: 120mm OD
Material: 10mm Sq Bar
100 R 10 Dia: 100mm OD
Material: 10mm Rnd Bar
86 S 10 Dia: 85mm OD
Material: 10mm Sq Bar
ALUMINIUM CURTAIN RINGS
Outside Diametre
80mm
90mm
100mm
120mm
130mm
140mm
150mm
160mm
260mm
350mm
450mm
550mm
650mm
750mm
850mm
950mm
Round Bar
80 R 8
90 R 8
100 R 8
120 R 8
130 R 8
140 R 8
150 R 8
160 R 8
260 R 8
350 R 8
450 R 8
550 R 8
650 R 8
750 R 8
850 R 8
950 R 8
MATERIAL - 8mm Square Bar
80 S 8
90 S 8
100 S 8
120 S 8
130 S 8
140 S 8
150 S 8
160 S 8
260 S 8
350 S 8
450 S 8
550 S 8
650 S 8
750 S 8
850 S 8
950 S 8
Outside Diametre
80mm
90mm
100mm
120mm
130mm
140mm
150mm
160mm
260mm
350mm
450mm
550mm
650mm
750mm
850mm
950mm
Round Bar
80 R 10
90 R 10
100 R 10
120 R 10
130 R 10
140 R 10
150 R 10
160 R 10
260 R 10
350 R 10
450 R 10
550 R 10
650 R 10
750 R 10
850 R 10
950 R 10
MATERIAL - 10mm Square Bar
80 S 10
90 S 10
100 S 10
120 S 10
130 S 10
140 S 10
150 S 10
160 S 10
260 S 10
350 S 10
450 S 10
550 S 10
650 S 10
750 S 10
850 S 10
950 S 10
Outside Diametre
80mm
90mm
100mm
120mm
130mm
140mm
150mm
160mm
260mm
350mm
450mm
550mm
650mm
750mm
850mm
950mm
Round Bar
80 R 12
90 R 12
100 R 12
120 R 12
130 R 12
140 R 12
150 R 12
160 R 12
260 R 12
350 R 12
450 R 12
550 R 12
650 R 12
750 R 12
850 R 12
950 R 12
MATERIAL - 12mm Square Bar
80 S 12
90 S 12
100 S 12
120 S 12
130 S 12
140 S 12
150 S 12
160 S 12
260 S 12
350 S 12
450 S 12
550 S 12
650 S 12
750 S 12
850 S 12
950 S 12
Outside Diametre
80mm
90mm
100mm
120mm
130mm
140mm
150mm
160mm
260mm
350mm
450mm
550mm
650mm
750mm
850mm
950mm
Round Bar
80 R 16
90 R 16
100 R 16
120 R 16
130 R 16
140 R 16
150 R 16
160 R 16
260 R 16
350 R 16
450 R 16
550 R 16
650 R 16
750 R 16
850 R 16
950 R 16
MATERIAL - 16mm Square Bar
80 S 16
90 S 16
100 S 16
120 S 16
130 S 16
140 S 16
150 S 16
160 S 16
260 S 16
350 S 16
450 S 16
550 S 16
650 S 16
750 S 16
850 S 16
950 S 16
Outside Diametre
95mm
110mm
120mm
350mm
400mm
450mm
500mm
550mm
600mm
650mm
700mm
750mm
800mm
850mm
900mm
950mm
Round Bar
95 F 126
110 F 126
120 F 126
350 F 126
400 F 126
450 F 126
500 F 126
550 F 126
600 F 126
650 F 126
700 F 126
750 F 126
800 F 126
850 F 126
900 F 126
950 F 126
MATERIAL - 12x6mm Flat Outside Diametre
95mm
110mm
120mm
350mm
400mm
450mm
500mm
550mm
600mm
650mm
700mm
750mm
800mm
850mm
900mm
950mm
Round Bar
95 F 256
110 F 256
120 F 256
350 F 256
400 F 256
450 F 256
500 F 256
550 F 256
600 F 256
650 F 256
700 F 526
750 F 256
800 F 256
850 F 256
900 F 256
950 F 256
MATERIAL - 25x6mm Flat
Outside Diametre
95mm
110mm
120mm
350mm
400mm
450mm
500mm
550mm
600mm
650mm
700mm
750mm
800mm
850mm
900mm
950mm
Round Bar
95 F 306
110 F 306
120 F 306
350 F 306
400 F 306
450 F 306
500 F 306
550 F 306
600 F 306
650 F 306
700 F 306
750 F 306
800 F 306
850 F 306
900 F 306
950 F 306
MATERIAL - 30x6mm Flat Outside Diametre
95mm
110mm
120mm
350mm
400mm
450mm
500mm
550mm
600mm
650mm
700mm
750mm
800mm
850mm
900mm
950mm
Round Bar
95 F 406
110 F 406
120 F 406
350 F 406
400 F 406
450 F 406
500 F 406
550 F 406
600 F 406
650 F 406
700 F 406
750 F 406
800 F 406
850 F 406
900 F 406
950 F 406
MATERIAL - 40x6mm Flat
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
TWISTED BAR - SINGLE (TB) / DOUBLE (TB D)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Twisted barsTwisted barsTWSITED ROPE BAR (TR)
MATERIALSquare Bar 8mm 10mm12mm16mm 20mm25mm
CODE TB 8 TB 10 TB 12 TB 16 TB 20 TB 25
SINGLE TWISTED BAR
Available in a variety of lengths - Refer to price list for lengths.
MATERIALSquare Bar 8mm 10mm12mm16mm 20mm25mm
CODE TB 8 D TB 10 D TB 12 D TB 16 D TB 20 D TB 25 D
DOUBLE TWISTED BAR
TWISTED FLAT BAR - SINGLE (TFB)
MATERIAL6mm Thickness 20 x 6mm 30 x 6mm 40 x 6mm 50 x 6mm
CODE TFB 20 6 TFB 30 6 TFB 40 6 TFB 50 6
6mm Flat Bar
Available in a variety of lengths - Refer to price list for lengths.
MATERIAL8mm Thickness 20 x 8mm 30 x 8mm 40 x 8mm 50 x 8mm
CODE TFB 20 8 TFB 30 8 TFB 40 8 TFB 50 8
8mm Flat Bar
TWISTED FLAT BAR - DOUBLE (TFB D)
MATERIAL6mm Thickness 20 x 6mm 30 x 6mm 40 x 6mm 50 x 6mm
CODE TFB 20 6 D TFB 30 6 D TFB 40 6 D TFB 50 6 D
6mm Flat Bar
Available in a variety of lengths - Refer to price list for lengths.
MATERIAL8mm Thickness 20 x 8mm 30 x 8mm 40 x 8mm 50 x 8mm
CODE TFB 20 8 D TFB 30 8 D TFB 40 8 D TFB 50 8 D
8mm Flat Bar
DOUBLE
SINGLE
Available in a variety of lengths - Refer to price list for lengths.
MATERIALSquare Bar 6mm 8mm 10mm
FITS 12mm 16mm 20mm
SQUARE BAR
CODE TR 01 12 TR 01 16 TR 01 20
MATERIALRound Bar 6mm 8mm 10mm
FITS 12mm 16mm 20mm
ROUND BAR
CODE TR 02 12 TR 02 16 TR 02 20
MATERIALSq & Rnd Bar 6mm 8mm 10mm
FITS 12mm 16mm 20mm
SQUARE & ROUND BAR
CODE TR 03 12 TR 03 16 TR 03 20
TR 01 TR 02 TR 03
45 46
GRECIAN BAR (GB)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Patterned tube & barSTEMMING (STEM)
CODES HT 20 S HT 25 S HT 32 S HT 38 S HT 50 S HT 76 S
MATERIALSSquare20mm 25mm32mm38mm 50mm76mm
WAVE BAR (WB) DUNGEON WEAVE (DW)
FLORENTINA - SINGLE (FL 01)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Patterned tube & barCODES STEM 6 STEM 8 STEM 10 STEM 12 STEM 16 STEM 20 STEM 25
MATERIALSLength - 3m 6mm 8mm10mm12mm 16mm20mm 25mm
CODES GB 8 GB 10 GB 12 GB 16 GB 20 GB 25
MATERIALSSize 8mm 10mm12mm16mm 20mm25mm
CODES GFB 20 6 GFB 30 6 GFB 40 6 GFB 50 6 GFB 60 6
MATERIALSSize - 6mm thick20 x 6mm 30 x 6mm40 x 6mm50 x 6mm 60 x 6mm
CODES GFB 20 8 GFB 30 8 GFB 40 8 GFB 50 8 GFB 60 8
MATERIALSSize - 8mm thick20 x 8mm 30 x 8mm40 x 8mm50 x 8mm 60 x 8mm
CODES GFB 20 10 GFB 30 10 GFB 40 10 GFB 50 10 GFB 60 10
MATERIALSSize - 10mm thick20 x 10mm 30 x 10mm40 x 10mm50 x 10mm 60 x 10mm
GRECIAN TUBE (GT)
GRECIAN FLAT BAR (GFB)
CODES TT 20 TT 25 TT 32 TT 38 TT 50 TT 76
MATERIALSSize20mm 25mm32mm38mm 50mm76mm
Available in 3m lengths only
Available in various lengths
ROSE STEMMING
CODES STEM 8 STEM 10 STEM 12 STEM 16
MATERIALSLength - 3m 8mm10mm12mm 16mm
BARK STEMMING
ROSE BARK
SquareWB 01 AWB 01 BWB 01 CWB 01 D
MATERIALSWB 01 - 100mm WAVE
Depth: 20mm / Length: 100mm
8mm10mm12mm 16mm
Length - 2.8m
RoundWB 01 EWB 01 FWB 01 GWB 01 H
SquareWB 02 AWB 02 BWB 02 CWB 02 D
MATERIALSWB 02 - 200mm WAVE
Depth: 70mm / Length: 200mm
8mm10mm12mm 16mm
Length - 2.8m
RoundWB 02 EWB 02 FWB 02 GWB 02 H
SQUARE BAR
WB 01 WB 02
CODES DW 01 A DW 01 BDW 01 C
MATERIALSLength - 2.8m 8mm10mm12mm
SQUARE BAR
CODES DW 01 E DW 01 FDW 01 G
MATERIALSLength - 2.8m 8mm10mm12mm
ROUND BAR
Curve Length: 100mm(Sold without Flowers)
6mm FLAT BAR 8mm FLAT BAR 10mm FLAT BAR
Grecian Flat Bar Available in a 3m or 6m length. Refer to price list.
FL 01Motif Depth: 70mm / Motif Length: 245mm
FLORENTINA - DOUBLE (FL 02)
HAMMERED TUBE (HT)
SQ RND
SQUARE TUBE
CODES HT 20 R HT 25 R HT 32 R HT 38 R HT 50 R HT 76 R
MATERIALSRound20mm 25mm32mm38mm 50mm76mm
ROUND TUBE
Available in various lengths
TWISTED TUBE (TT)
CODES GT 20 GT 25 GT 32 GT 28 GT 50
MATERIALSSquare20mm 25mm32mm38mm 50mm
CODES GTR 32 20 GTR 38 20 GTR 38 25 GTR 50 25 GTR 50 38
MATERIALSRectagle32 x 20 x 2mm 38 x 20 x 2mm38 x 25 x 2mm50 x 25 x 2mm 50 x 38 x 2mm
SQ RECAvailable in various lengths
RECTANGULAR TUBE
SQUARE TUBE
FL 01 A 21 FL 01 B 21 FL 01 C 21
FL 01 E 21 FL 01 F 21 FL 01 G 21
FL 01 L 21 FL 01 N 21
MATERIALSFL 01 - SINGLE FLORENTINA
Square Bar8mm10mm12mm Round Bar8mm10mm12mm Flat Bar20 x 8mm25 x 8mm
2.1m
FL 01 A 26 FL 01 B 26 FL 01 C 26
FL 01 E 26 FL 01 F 26 FL 01 G 26
FL 01 L 26 FL 01 N 26
2.6m
FL 02 A 21 FL 02 B 21 FL 02 C 21
FL 02 E 21 FL 02 F 21 FL 02 G 21
FL 02 L 21 FL 02 N 21
MATERIALSFL 02 - DOUBLE FLORENTINA
Square Bar8mm10mm12mm Round Bar8mm10mm12mm Flat Bar20 x 8mm25 x 8mm
2.1m
FL 02 A 26 FL 02 B 26 FL 02 C 26
FL 02 E 26 FL 02 F 26 FL 02 G 26
FL 02 L 26 FL 02 N 26
2.6m
Motif Depth: 140mm / Motif Length: 245mm
FL 02
PRESSED TUBE (PT)
CODES PT 20 PT 25 PT 32 PT 38 PT 50
MATERIALSSize20mm 25mm32mm38mm 50mm
Available in 3m lengths only
47 48
FORMED HANDRAIL (HR)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Drawn Handrail
CODES HR 4M 3 HR 5M 3
MATERIALSSize - 3m40 x 12mm 50 x 12mm
CODES HR 4M 6 HR 5M 6
MATERIALSSize - 6m40 x 12mm 50 x 12mm
HR 5Dim 50mm x 14mm
Sold in 3m lengths
HR 4Dim 40mm x 10mm
Sold in 3m lengths
HR 4M40mm wide x 6mm tihck
Height: 12mm / Arch: 6mm
Sold in 3m & 6m lengths
HR 5M50mm wide x 6mm tihck
Height: 12mm / Arch: 6mm
Sold in 3m & 6m lengths
CODES HR 4 3 HR 5 3
MATERIALSSize - 3m40 x 10mm 50 x 14mm
50 x 12mm40 x 12mm50 x 14mm40 x 10mm
BANISTER ENDS (BE)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Banister ends / Rail ends
640
110
640
150
110
750
110
250
150
270
180
190
CODES
BE 306 LT 150 BE 308 LT 150 BE 406 LT 150 BE 408 LT 150 BE 506 LT 150 BE 508 LT 150 HR 4 LT 150 HR 5 LT 150
HR 4M LT 150 HR 5M LT 150
MATERIALS
30 x 6mm30 x 8mm40 x 6mm40 x 8mm 50 x 6mm50 x 8mm
40 x 10mm 50 x 14mm
40 x 12mm (6mm) 50 x 12mm (6mm)
Flat bar
Traditional Hand Rail
Curved Arch Hand Rail
CODES
BE 306 LT 110 BE 308 LT 110 BE 406 LT 110 BE 408 LT 110 BE 506 LT 110 BE 508 LT 110 HR 4 LT 110 HR 5 LT 110
HR 4M LT 110 HR 5M LT 110
MATERIALS
30 x 6mm30 x 8mm40 x 6mm40 x 8mm 50 x 6mm50 x 8mm
40 x 10mm 50 x 14mm
40 x 12mm (6mm) 50 x 12mm (6mm)
Flat bar
Traditional Hand Rail
Curved Arch Hand Rail
LT 150 LT 110
CODES
BE 306 L BE 308 L BE 406 L BE 408 L BE 506 L BE 508 L HR 4 L HR 5 L
HR 4M L HR 5M L
MATERIALS
30 x 6mm30 x 8mm40 x 6mm40 x 8mm 50 x 6mm50 x 8mm
40 x 10mm 50 x 14mm
40 x 12mm (6mm) 50 x 12mm (6mm)
Flat bar
Traditional Hand Rail
Curved Arch Hand Rail
CODES
BE 306 S BE 308 S BE 406 S BE 408 S BE 506 S BE 508 S HR 4 S HR 5 S
HR 4M S HR 5M S
MATERIALS
30 x 6mm30 x 8mm40 x 6mm40 x 8mm 50 x 6mm50 x 8mm
40 x 10mm 50 x 14mm
40 x 12mm (6mm) 50 x 12mm (6mm)
Flat bar
Traditional Hand Rail
Curved Arch Hand Rail
CODES
BE 306 S 180 BE 308 S 180 BE 406 S 180 BE 408 S 180 BE 506 S 180 BE 508 S 180 HR 4 S 180 HR 5 S 180
HR 4M S 180 HR 5M S 180
MATERIALS
30 x 6mm30 x 8mm40 x 6mm40 x 8mm 50 x 6mm50 x 8mm
40 x 10mm 50 x 14mm
40 x 12mm (6mm) 50 x 12mm (6mm)
Flat bar
Traditional Hand Rail
Curved Arch Hand Rail
CODES
BE 306 S 150 BE 308 S 150 BE 406 S 150 BE 408 S 150 BE 506 S 150 BE 508 S 150 HR 4 S 150 HR 5 S 150
HR 4M S 150 HR 5M S 150
MATERIALS
30 x 6mm30 x 8mm40 x 6mm40 x 8mm 50 x 6mm50 x 8mm
40 x 10mm 50 x 14mm
40 x 12mm (6mm) 50 x 12mm (6mm)
Flat bar
Traditional Hand Rail
Curved Arch Hand Rail
LONG SHORT
SHORT 150 SHORT 180
Please Note: End curls can be done onto the full 3m length of handrail, therefore avoiding having to weld end curls onto handrail.
TRADITIONAL IMPORTED HANDRAIL LOCAL MANUFACTURED ARCH HANDRAIL
49 50
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Post tops & Newel ballsCAST STEEL POST TOPS (CSPT)
CSPT 25 (Cast Steel)35 x 22mm
Fits 25mm square
NBCS 25 (Cast Steel)35 x 60mm
Fits 25mm square
CSPT 38 (Cast Steel)50 x 25mm
Fits 38mm square
NBCS 38 (Cast Steel)60 x 95mm
Fits 38mm square
CSPT 50 (Cast Steel)80 x 30mm
Fits 50mm square
NBCS 50 (Cast Steel)
63 x 100mmFits 50mm square
CSPT 76 (Cast Steel)85 x 40mm
Fits 76mm square
NBCS 76 (Cast Steel)90 x 125mm
Fits 76mm square
CSPT 100 (Cast Steel)110 x 50mm
Fits 100mm square
NBCS 100 (Cast Steel)115 x 150mm
Fits 100mm square
CAST STEEL NEWELL BALLS (NBCS)
SPT 0133 x 60mm
Fits 25mm square
STEEL POST TOPS (SPT)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Post tops & Newel ballsCAST IRON POST TOPS (CIPT)
CIPT 25 (Cast Iron)35 x 25mm
Fits 25mm square
NBCI 25 (Cast Iron)
35 x 60mmFits 25mm square
CPT 0330 x 55mm
Fits 25-30mm Sq
CIPT 38 (Cast Iron)50 x 25mm
Fits 38mm square
NBCI 38 (Cast Iron)
50 x 70mmFits 38mm square
CIPT 50 (Cast Iron)65 x 30mm
Fits 50mm square
NBCI 50 (Cast Iron)
65 x 100mmFits 50mm square
CIPT 76 (Cast Iron)90 x 30mm
Fits 76mm square
NBCI 76 (Cast Iron)90 x 125mm
Fits 76mm square
CIPT 100 (Cast Iron)115 x 45mm
Fits 100mm square
NBCI 100 (Cast Iron)
115 x 150mmFits 100mm square
CAST IRON NEWELL BALLS (NBCI)
CAST IRON POST TOPS (CPT)
CPT 0235 x 60mm
Fits 30mm Sq
CPT 0192 x 100mm
Fits 80mm Rnd
SPT 0257 x 38mm
Fits 16mm square
SPT 0350 x 90mm
Base: 45mm round
ACORN50 x 80mm
Base: 50mm Rnd
CPT 0671 x 71mm
CPT 0532 x 61mm
CPT 0425 x 51mm
51 52
ROUND POLE CAPS - PRESSED (PC)
SQUARE POLE CAPS - PRESSED (SPC)
FLAT DISCS (FD)
POLE CAPS
30mm40mm50mm60mm 70mm80mm 100mm 100mm (with Lip) 120mm 140mm 150mm 170mm 190mm
SQUARE POLE CAPS
50mm76mm90mm100mm
CODE
SPC 50 SPC 76 SPC 90 SPC 100
CODE
PC 30PC 40 PC 50 PC 60PC 70PC 80PC 100 PC 100 L PC 120 PC 140 PC 150 PC 170 PC 190
FLAT DISCS
30mm40mm50mm60mm 65mm76mm 85mm 90mm 100mm
CODE
FD 30FD 40FD 50FD 60 FD 65FD 76 FD 85 FD 90 FD 100
Pole Caps & Domes
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
SOLID BALLS (SB)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Balls
HOLLOW BALLS (HB)
HEMISPHERES (HEM)
Available in a 1mm & 2mm wall thickness
CODES
SB 15SB 20SB 25SB 30SB 35SB 40SB 50
SIZE
15mm20mm25mm30mm35mm40mm50mm
Material - Mild Steel
SOLID BALLS
CODES
HB 30HB 40HB 50HB 60HB 70HB 80HB 100HB 120HB 150
SIZE
30mm40mm50mm60mm70mm80mm100mm120mm150mm
Material - Mild Steel
HOLLOW BALLS
Available in a 1mm & 2mm wall thickness
CODES
HEM 30HEM 40HEM 50HEM 60HEM 70HEM 80HEM 100HEM 120HEM 150
SIZE
30mm40mm50mm60mm70mm80mm100mm120mm150mm
Material - Mild Steel
HEMISPHERES / HALF BALLS
53 54
55 56
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
MOUNTING PLATES (MP) WALL PLATES (WP)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Plate 5 mmMP 03 60 - 60mmMP 03 80 - 80mmMP 03 90 - 90mm
Plate 5 mmMP 02 60 - 60mmMP 02 80 - 80mmMP 02 90 - 90mm
MPR 2 Plate 4mmDia 100mm
MPR 3Plate 4mm
Dia 80mm
PlatesPlates
MPR 4Plate 4mm
Dia 80mm
Plate 5 mmMP 01 60 - 60mmMP 01 80 - 80mmMP 01 90 - 90mm
MOUNTING PLATES (MPR)
MOUNTING PLATES (MPD)
MPD 1 Plate 5 mm
Dim 275mm x190mm
MPD 3 Plate 5 mm
200mm x150mm
MPD 2Plate 5 mm
Dim 275mm x 190mm
MPD 4Plate 5 mm
140mm x 125mm
MPD 5Plate 2.5 mm
225mm x 140mm
WP 01Plate 3 mm
40mm x 80mm
WP 05 Plate 5 mm
120mm x 230mm
WP 04Plate 3 mm
120mm x 230mm
WP 03Plate 3 mm
80mm x 160mm
WP 02 Plate 3 mm
60mm x 120mm
MPR 1 Plate 4mm
Dia 80mm
WP 06Plate 4 mm
80mm x 160mm
MPR 5Plate 2mm
Dia 60mm
PLAIN BASE PLATES (P)
P 05Plate 3 mm
200mm x 200mm
P 06Plate 5 mm
200mm x 200mm
P 07Plate 3 mm
250mm x 250mm
P 08Plate 5 mm
250mm x 250mm
P 01Plate 3 mm
100mm x 100mm
P 02Plate 5 mm
100mm x 100mm
P 03Plate 3 mm
150mm x 150mm
P 04Plate 5 mm
150mm x 150mm
Plate 5 mmMP 04 60 - 60mmMP 04 80 - 80mmMP 04 90 - 90mm
Plate 5 mmMP 05 60 - 60mmMP 05 80 - 80mmMP 05 90 - 90mm
MP 01 MP 02 MP 03 MP 04 MP 05
WP 07Plate 3 mm
300mm x 180mm
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
FOOT PLATES (FTP) DECORATIVE PLATES (DP)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
PlatesPlates
FOOT PLATES Material: 5mm thick plate
SQUARE FTP 1 S FTP 2 S FTS 3 S FTP 4 S
FITS 32mm square 38mm square 50mm square 76mm square
SIZE 90 x60mm 96 x 66mm 108 x 82mm 160 x 114mm
PLEASE NOTE: All screw holes are 6mm diametre.
FOOT PLATES Material: 5mm thick plate
ROUND FTP 1 R FTP 2 R FTS 3 R FTP 4 R
FITS 32mm round 38mm round 50mm round 76mm round
SIZE 90 x60mm 96 x 66mm 108 x 82mm 160 x 114mm
PLEASE NOTE: All screw holes are 6mm diametre.
SQUARE HOLE ROUND HOLE
57 58
DOOR HANDLES (DH)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
DH 01 Dim 75 x 220mm
Centre: B 08 SLL Basket
DH 02Dim 80 x 270mm
Centre: B 12 H Basket
DH 03 Dim 100 x 340mm
Centre: B 20 ML Basket
Door handles
DH 06 Dim 80 x 280mm
Centre: FCP 256 Square
DH 07 Dim 80 x 280mm
Centre: FCP 256 Round
DH 08 Dim 80 x 250mm
Centre: FCP 02S Square
DH 09 Dim 80 x 250mm
Centre: FCP 02R Round
DH 10 Dim 80 x 250mm
Centre: FCP 16S Square
Buckling
CODES BM 10 BM 12 BM 16 BM 20 BM 24 BM 30
MATERIALSFits10mm 12mm16mm20mm 24mm30mm
BANDAGE MATERIAL (BM)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
CODES BM 203 10 BM 203 12 BM 203 16 BM 203 20 BM 203 24 BM 203 30
MATERIALSFits10mm 12mm16mm20mm 24mm30mm
BM 203
CODES BM 144 10 BM 144 12 BM 144 16 BM 144 20 BM 144 24 BM 144 30
MATERIALSFits10mm 12mm16mm20mm 24mm30mm
BM 203 L 2000 x 14 x 3mm
(Full Length: 2000mm)
BM 144 L 2000 x 14 x 4mm
(Full Length: 2000mm)
BM 144
BM L 2000 x 20 x 3mm
(Full Length: 2000mm)
BM
59 60
PALISADE & RAZOR SPIKE
Palisade
7 SPIKE PS 7S
Material: 60 x 2mm
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
TRIDENT PS T
Material: 60 x 2mm
ASSEGAI PS A
Material: 60 x 2mm
5 SPIKE PS 5S
Material: 60 x 2mm
RAZOR SPIKE / SHARK TOOTH PSS
Material: 35 x 2mm Length: 2,4m long
PALISADE PALES
Palisade
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
RAZOR SPIKE 35mm wide x 2mm thick2,4m long PSS
RAZOR SPIKE 35mm wide x 2mm thick2,4m long
PALISADE PICKETS Material: 60mm wide x 2mm thick PICKET LENGTHS30cm 50cm 80cm 1m 1,2m 1,5m1,8m2m 2,1m2,4m
ASSEGAIPS A 03PS A 05PS A 08PS A 1PS A 12PS A 15PS A 18PS A 2PS A 21PS A 24
TRIDENTPS T 03PS T 05PS T 08PS T 1PS T 12PS T 15PS T 18PS T 2PS T 21PS T 24
5 SPIKEPS 5S 03PS 5S 05PS 5S 08PS 5S 1PS 5S 12PS 5S 15PS 5S 18PS 5S 2PS 5S 21PS 5S 24
7 SPIKEPS 7S 03PS 7S 05PS 7S 08PS 7S 1PS 7S 12PS 7S 15PS 7S 18PS 7S 2PS 7S 21PS 7S 24
PALISADE PICKETS
All our palisade pickets are made from a 60mm wide x 2mm thick mild steel and are sold in a raw material. The bottom ends of the pickets are cut straight, but we can do a downward facing Assegai or Trident point at the bottom
of the picket on request, which will be charged separately.
Any additional cuts will also be charged for at a standard rate per cut.
STANDARD SIZESThe sizes below are our standard lengths, but we can manufacture any length between 30cm and 3,5 metres.
We keep stock of all the best selling sizes in our shop and manufacture all other sizes on request. Lead times vary from a few hours for small orders to about 2-3 days for large orders, depending on the amount of orders in the factory at the time.
LEAD TIMES - ORDERSPlease phone to enquire about lead times on large orders when placing orders with us of any size we do not keep in stock.
RAZOR SPIKE / SHARK TOOTH
The razor comb strips are 35mm wide x 2mm thick mild steel, and 2,4m long strips.
RAZOR SPIKE / SHARK TOOTH
61 62
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
ROSE LEAVES & ROSES
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Leaves & Flowers Leaves & Flowers GRAPE VINE LEAVES & PRESSED GRAPE BUNCH
LF 03 1.2mm plate48 x 90mm
LF 042mm plate35 x 50mm
LF 05 2mm plate35 x 45mm
LF 02 1.2mm plate38 x 70mm
LF 01 1.6mm plate27 x 60mm
LF 06 1mm plate
30 x 70mm
LF 64 1.6mm plateDia 75mm
LF 65 1.6mm plateDia 55mm
LARGE ROSE
LF 86 1mm plate
55 x 90mm
SOLID GRAPE BUNCHES
LF 23 1mm plate
100 x 100mm
LF 24 1mm plate75 x 75mm
LF 28 0.8mm plate75 x 70mm
LF 29 2mm plate85 x 85mm
LF 30 2.5mm plate110 x 120mm
LF 56 1mm plate
95 x 110mm
LF 69 20mm balls
105 x 95 X 60mm
LF 68 15mm balls
90 x 90 X 50mm
LF 70 25mm balls
70 x 110 X 60mm
MEDIUMSMALL
LARGE
LF 67 - Right 2mm plate
160 x 110mm
LF 66 - Left 2mm plate60 x 110mm
PRESSED GRAPE BUNCH
LF 15 2mm plate
65 x 65 x 35mm
CANDLE CUPSMALL ROSE
63 64
65 66
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
DAISY FLOWERS
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Leaves & Flowers Leaves & Flowers ST JOSEPH LILLIES
LF 18 - Combined 3mm plateDia 95mm
LF 19 3mm plateDia 65mm
LF 20 2mm plateDia 50mm
LF 17 - Large 3mm plateDia 95mm
LF 16 - Small 3mm plateDia 65mm
(Dome Shaped)
12 PETAL DAISY
8 PETAL DAISY
ASSEMBLED DAISY
8 PETAL DAISY
8 PETAL DAISY
LF 25 2mm plateDia 95mm
5 PETAL DAISY
LF 58 - Medium 3mm plateDia 90mm
LF 59 - Large 3mm plateDia 120mm
LF 60 - Combined 3mm plateDia 120mm
LF 57 - Small 3mm plateDia 65mm
6 PETAL DAISY
6 PETAL DAISY
6 PETAL DAISY ASSEMBLED DAISY
LF 53 - Small 2mm plate
30 x 135mm
LF 54 - Large 2mm plate
35 x 160mm
LF 55 2mm plate
75 x 160mm
LF 52 - Large 2mm plate
60 x 210mm
LF 51 - Small 2mm plate
40 x 150mm
ST JOSEPH PETALST JOSEPH LILLY
ST JOSEPH LEAF
LF 61 2mm plateDia 70mm
6 PETAL DAISY
LF 83 0.6mm plate
Head: 50 x 80mmStem Length: 170 - 300mm
LF 84 0.6mm plate
Head: 70 x 120mmStem Length: 170 - 300mm
LF 85 0.6mm plate
Head: 75 x 140mmStem Length: 170 - 300mm
LF 15 2mm plate
65 x 65 x 35mm
CANDLE CUP
ARUM LILLIES
PLEASE NOTE Lilly centres vary between plain & textured from time to time. These items are bought from another supllier so we
have no control over which one will arrive when ordered.
ARUM LILLYSMALL
ARUM LILLYMEDIUM
ARUM LILLYLARGE
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
LEFT & RIGHT LEAF SETS
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Leaves & Flowers Leaves & Flowers LEFT & RIGHT LEAF SETS
LF 08 - Right 2mm plate70 x 65mm
LF 09 - Left 2mm plate65 x 90mm
LF 10 - Right 2mm plate65 x 90mm
LF 07 - Left 2mm plate70 x 65mm
LF 22 - Right 2mm plate
44 x 100mm
LF 12 - Right 2.5mm plate60 x 130mm
LF 21 - Left 2mm plate
44 x 100mm
LF 11 - Left 3mm plate
60 x 130mm
WINGED LEAF
SPLIT LEAF
FIN LEAF
LF 27 - Right 2mm plate50 x 55mm
LF 26 - Left 2mm plate50 x 55mm
MAPLE LEAF
LF 49 - Left 3mm plate
90 x 180mm
LF 50 - Right 3mm plate
90 x 180mm
LF 63 - Right 4mm plate
55 x 130mm
LF 62 - Left 4mm plate
55 x 130mm
LF 73 - Left 2mm plate45 x 110mm
LF 74 - Right 2mm plate45 x 110mm
LF 72 - Right 2mm plate
50 x 135mm
LF 71 - Left 2mm plate
50 x 135mm
LF 82 - Right 2mm plate40 x 115mm
LF 81 - Left 2mm plate40 x 115mm
LF 13 - Left 2mm plate
95 x 100mm
LF 14 - Right 2mm plate
95 x 100mm
BAROQUE LEAF
WINGED LEAF
BAROQUE LEAF
LF 78 - Left 4mm plate
100 x 80mm
LF 79 - Right 4mm plate
100 x 80mm
LF 77 - Right 4mm plate
100 x 80mm
LF 76 - Left 4mm plate
100 x 80mm
CURVED LEAF
CURVED LEAFCURVED LEAF
CURLED LEAF CURLED LEAF
67 68
69 70
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
LEFT & RIGHT LEAF SETS
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Leaves & Flowers Leaves & Flowers FERN & THISTLE LEAVES
LF 88 - Right 3-4mm thick120x 215mm
LF 87 - Left 3-4mm thick120x 215mm
DECORATIVE ANTIQUE LEAF
LF 89 - Left 3-5mm thick135 x 230mm
LF 90 - Right 3-5mm thick135 x 230mm
ANTIQUE LEAF
LF 33 1mm plate
55 x 210mm
LF 34 - 1mm plate LF 35 - 2mm plate
70 x 215mm
LF 32 1mm plate
40 x 120mm
LF 31 1mm plate
40 x 120mm
THISTLE LEAF
THISTLE LEAFTHISTLE LEAF
THISTLE LEAF
LF 42 2.5mm plate75 x 155mm
LF 41 2.5mm plate60 x 155mm
FERN LEAF FERN LEAF
LF 43 3mm plate
115 x 285mm
FERN LEAF
LF 48 - Large 3mm plate
156 x 178mm
LF 47 - Medium 3mm plate
118 x 136mm
LF 46 - Small 3mm plate78 x 86mm
MEDIUM
SOLANDRA LEAVES
LARGE
SMALL
71 72
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
SINGLE LEAVES
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Leaves & Flowers Leaves & Flowers SINGLE LEAVES
LF 44 2mm plate55 x 110mm
LF 45 3mm plate
130 x 140mm
OAK LEAF
FIN LEAF
LF 80 3mm plate
60 x 130mm
LF 75 3mm plate
75 x 240mm
APPLE LEAF
LF 382.5mm plate135 x 380mm
LF 39 2.5mm plate50 x 280mm
LF 40 2.5mm plate50 x 360mm
LF 37 2.5mm plate92 x 260mm
LF 36 3mm plate
75 x 265mm
WHITE/BUR OAK LEAF
WHITE/BUR OAK LEAF
CHILDHOOD FANTASY LEAVES DECORATIVE LEAF
BUTTERFLIES
BUT L 2.5mm plate210 x 240mm
BUT M 2.5mm plate170 x 185mm
BUT S 2.5mm plate130 x 120mm
SMALL
MEDIUM
LARGE
CSC 21 Dim 50 x 50mm
Fits 12mm Square
CSC 19Dim 35 x 30mm
Fits 12mm Square
CSC 17 & 18 Dim 47 x 55mm
Fits 12mm SquareFits 16mm Round
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
CAST STEEL COLLARS (CSC) CAST STEEL COLLARS (CSC)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Collars - SteelCollars - Steel
CSC 22 & 23Dim 39 x 40mm
Fit 12 & 16mm Round & Square
CSC 08Dim 35 x 13mmFit 16mm Round
CSC 09Dim 40 x 67mmFit 12mm Square
CSC 10Dim 40 x 68mm
Fit 12mm Square & Round
CSC 26 & 27Dim 35 x 38mm
Fit 12 & 16mm Round
CSC 27
CSC 01 - 04Dim 40 x 20mm
Fit 12 & 16mmSquare & Round
CSC 28Dim 28 x 120mmFit 12mm Square
12
CSC 13 & 14Dim 35 x 60mm Fit 12mm SquareFit 16mm Round
12
16 12
12
12
16
12G
16H
C
D
12
16
12
CSC 29Dim 46 x 67mm
Fit 12 & 16mm Square
C
D
12
16
12
C
G
12
12
16CSC 02
12
16
CSC 01
CSC 04
CSC 03
CSC 05 - 07Fit 12 & 16 & 20mm
Square
12CSC 05Dim 35 x 20mm
16CSC 06Dim 40 x 22mm
20CSC 07Dim 55 x 35mm
CSC 26
CSC 23
CSC 23
CSC 22
CSC 22
CSC 14 16
CSC 13 12
CSC 18 16
CSC 17
CAST STEEL COLLARS (CSC)
Collars - Steel
16H
73 74
75 76
CAST STEEL COLLARS (CSC)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Collars - Steel
CSC 12, 16, 20 & 25Fit 12, 16, 20 & 25mm
Square
CSC 48 Diametre 80mm
Round Foot Collar - Solid Base
25
20
16
12CSC 12
CSC 16
Dim 38 x 47mm
Dim 43 x 48mm
CSC 20
CSC 25
Dim 47 x 59mm
Dim 57 x 65mm
CSC 31Dim 38 x 123mm
Fit 12 & 16mm Round
CSC 40
CSC 41
Dim 100 x 100mm
Dim 100 x 100mm
CSC 42
CSC 43
Dim 80 x 80mm
Dim 80 x 80mm
51
40
40
35
CSC 44
CSC 45
Dim 60 x 60mm
Dim 60 x 60mm
CSC 46
CSC 47
Dim 50 x 50mm
Dim 50 x 50mm
30
20
20
16
CSC 40 & 41Dim 100mm square
Fit 40 & 51mmSquare Foot Collar
CSC 44 & 45Dim 60mm square
Fit 20 & 30mmSquare Foot Collar
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
12G
16H
CAST STEEL COLLARS (CSC)
Collars - Steel
CSC 42 & 43Dim 80mm square
Fit 35, 40mmSquare Foot Collar100 x 100mm 80 x 80mm
CSC 46 & 47Dim 50mm square
Fit 16, 20mmSquare Foot Collar
60 x 60mm 50 x 50mm
80mm
CSC 49 Dim: 50 x 50mm
Square Foot Collar - Solid Base
50 x 50mm
CSC 33 Dim 35 x 18mm
Fits 16mm Round
16
CSC 30 (Full) & CSC 32 (Half)Dim 38 x 135mm
Fit 12 & 16mm Round
12G
16H
12C
77 78
CAST IRON COLLARS (CIC)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Collars - Cast IronCAST IRON COLLARS (CIC)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Collars - Cast Iron
CIC 01Dim 19 x 36mmFit 16mm Round
CIC 02 - 04Fit 14, 16 & 20mm
Square
CIC 13Dim 51 x 51mm
Fit 16mm Round
CIC 09Dim 40 x 136mmFit 16mm Round
CIC 10Dim 39 x 127mm Fit 16mm Round
CIC 11Dim 40 x 175mmFit 16mm Round
CIC 05Dim 45 x 75mmFit 16mm Round
CIC 06Dim 30 x 40mmFit 16mm Round
CIC 07 & 08Dim 30 x 38mm
Fit 12 & 16mm Round
CIC 07
16
12
16 16 16
16
16
16CIC 12, 16, 20 & 25Fit 12, 16, 20 & 25mm
Square
25
20
16
12CIC 12
CIC 16
Dim 38 x 47mm
Dim 43 x 48mm
CIC 20
CIC 25
Dim 47 x 59mm
Dim 57 x 65mm CIC 08
14CIC 02
Dim 32 x 20mm
16CIC 03
Dim 32 x 20mm
20CIC 04
Dim 45 x 75mm
16
79 80
DIE FORGED SPEARS (DFS) & CAST STEEL SPEARS (CSS) DIE FORGED SPEARS (DFS) & CAST STEEL SPEARS (CSS)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Steel Spears Steel Spears
DFS 01 - 110 x 140mm CSS 01 - 110 x 140mm
Base 20mm squareLip 25mm square
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
DFS 02 - 90 x 130mmBase 20mm square solid
CSS 02 - 95 x 130mm
Hole 16mm squareFrame 25mm square
DFS 03 - 70 x 120mmBase 20mm square solid
CSS 03 - 70 x 120mmHole 16mm square
Frame 23mm square
DFS 04 - 75 x 95mm CSS 04 - 75 x 105mmBase 16mm round solid
DFS 05 - 40 x 100mmCSS 05 - 40 x 100mmBase 20mm square solid
DFS 06 - 70 x 120mm CSS 06 - 70 x 120mm
Base 20mm square solid
DFS 07 - 20 x 80mmCSS 07 - 20 x 80mmBase 16mm square solid
DFS 08 - 28 x 120mmCSS 08 - 28 x 120mm
Base 20mm square solid
DFS 09 S - 25 x 150mm DFS 10 S - 20 x 100mmBase 25 & 20mm Square
DFS 11 - 60 x 125mmCSS 11 - 60 x 125mm
Base 12mm roundRing 17mm round
DFS 12 - 55 x 125mmBase 20mm round solid
DFS 13 - 50 x 130mmCSS 13 - 50 x 130mm
Base 12mm roundRing 16mm round
DFS 14 - 70 x 205mmBase 20mm round solid
DFS 15 - 65 x 120mmCSS 15 - 65 x 120mmBase 16mm round solid
DFS 20 - 60 x 135mmCSS 20 - 60 x 135mm
Base 12mm roundRing 18mm round
DFS 16 - 55 x 125mmBase 23mm round solid
CSS 17 - 60 x 100mmHole 12mm square
Frame 24mm square
CSS 18 - 50 x 100mmHole 12mm square
Frame 24mm square
CSS 19 - 60 x 115mmShank 12mm round solid
Ring 20mm round
DFS 09 R - 25 x 150mm DFS 10 R - 20 x 120mmBase 25 & 20mm Round
PEN R - Rnd / PEN S - SqHeight 150mm
Size: 10; 12; 16, 20 & 25mm
AR 08 / AR 1015 x 110mm
Material: 8 & 10mm Sq Ham
81 82
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
CAST IRON SPEARS (CIS) CAST IRON SPEARS (CIS)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
CIS 0160 x 200mm
Shank 23mm solid
CIS 02100 x 45mm
Fits 25mm Sq tube
CIS 0350 x 100mm
Hole 12mm squareFrame 20mm square
CIS 0455 x 1 15mm
Hole 12mm squareFrame 25mm square
Spears - Cast ironSpears - Cast iron
CIS 0570 x 125mm
Shank 12mm roundDisk 25mm round
CIS 0670 x 145mm
Shank 16mm roundDisk 25mm round
CIS 0770mm x 1 15mm
Shank 12mm roundDisk 20mm round
CIS 0870 x 120mm
Hole 12mm squareFrame 20mm square
CIS 1365 x 200mm
Hole 25mm squareFrame 40mm square
CIS 1440 x 100mm
Hole 12mm squareFrame 23mm square
CIS 1530 x 90mm
Fits 12mm Round
CIS 1625 x 110mm
Hole 12mm squareFrame 23mm square
CIS 1730 x 100mm
Hole 12mm roundFrame 23mm round
CIS 18 70 x 130mm
Fits 16 - 18mm round
CIS 19115 x 155mm
Fits 20mm squareDisk 25mm round
CIS 20115 x 140mm
Fits 12mm roundDisk 20mm round
CIS 21 20 x 90mm
Hole 12mm squareFrame 23mm square
CIS 2226 x 110mm
Hole 12mm squareFrame 25mm square
CIS 2350 x 153mm
Hole 20mm squareFrame 30mm square
CIS 2455 x 200mm
Hole 25mm squareFrame 40mm square
CIS 0960 x 105mm
Hole 12mm squareFrame 25mm square
CIS 10110 x 160mm
CIS 1185 x 210mm
Shank 25mm solid
CIS 1270 x 160mm
Hole 12mm squareBase 25mm round
CIS 25100 x 130mm
Hole 12mm roundFrame 25mm round
CAST IRON SPEARS (CIS)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
CIS 2647 x 107mm
Hole 12mm roundFrame 20mm round
Spears - Cast iron
CIS 2760 x 205mm
Hole 25mm squareFrame 40mm square
CIS 2890 x 135mm
Hole 12mm squareFrame 25mm square
CIS 2965 x 115mm
Hole 12mm squareFrame 35mm round
CAST IRON ACCESSORIES (CIA)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Cast Iron Accessories
83 84
CIA 01Dim 110 x 110mm
(At the 90 degree Angle)
CIA 02 Dim 115 x 60mm
CIA 09 Dim 110 x 100mm
CIA 08 Dim 340 x 170mm
CIA 03 Dim 245 x 45mm
CIA 04Dim 525 x 153mm
CIA 06 Dim 455 x 100mm
CIA 05 Dim 310 x 65mm
CIA 07Dim 485 x 60mm
CAST IRON ROSETTES (RO)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
RO 9 Dia 169mm
Cast Iron RosettesCAST IRON ROSETTES (RO)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Cast Iron Rosettes
RO 8 Dim 100 x 250mm
RO 21 Dia 210mm
RO 1 1Dia 190mm
RO 10 Dia 220mm
85 86
RO 1 Dia 95mm
RO 6Dia 120mm
RO 16Dia 55mm
RO 2Dia 80mm
RO 7 Dia 169mm
RO 12 Dim 80mm x 57mm
RO 17 Dia 80mm
RO 14 Dim 125mm x 160mm
RO 3Dia 91mm
RO 15 Dim 119 x 117mm
RO 4Dia 102mm
RO 5Dia 81mm
RO 18 Dia 50mm
RO 19 Dia 110mm
RO 20 Dia 118mm
RO 13 Dim 120 x 170mm
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
TrimmingsVICTORIAN BROEKIE LACE
CIT 12 Dim 755 x 180mm
CIT 13Dim 760 x 130mm
CIT 17 Dim 670 x 105mm
PLEASE NOTE: All cast iron trimmings are double-sided
CIT 02 Dim 340 x 380mm
CIT 06 Dim 400 x 520mm
CIT 04Dim 380 x 380mm
CIT 07 Dim 470 x 470mm
CIT 14Dim 750 x 180mm
CAST IRON - CORNER PIECES
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Trimmings
CIT 01 Dim 410 x 410mm
PLEASE NOTE: All cast iron trimmings are double-sided
CIT 03 Dim 400 x 400mm
CIT 05 Dim 460 x 460mm
CAST IRON - LENGTHS
CIT 11Dim 770 x 135mm
CIT 15 Dim 530 x 140mm
CIT 16Dim 990 x 130mm
CIT 18 Dim 800 x 135mm
CIT 20 Dim 995 x 75mm
CIT 09 Dim 670 x 230mm
CIT 08 Dim 560 x260mm
CIT 09 x 2COMBINED
Dim 670 x 670mm
87 88
CAST IRON - GATE TOPPERS
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Trimmings
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
TrimmingsCOMBINED TRIMMINGS - CENTRE PIECES
PLEASE NOTE: All cast iron trimmings are double-sided
PLEASE NOTE: All cast iron trimmings are double-sided
CIT 10Dim 730 x 290mm
CIT 19Dim 1 185 x 175mm
CIT 08 x 2Dim 1120 x 260mm
CIT 08 (Dim 560 x 260mm) used twice to create gate topper
CIT 08 x 2Dim 520 x 560mm
CIT 08 (Dim 260 x 560mm) used twice to create gate topper
CIT 09 Dim 1340 x 1340mm
COMBINED8 x CIT 09
CIT 10Dim 580 x 730mm
COMBINED2 x CIT 10
CIT 03 Dim 800 x 800mm
COMBINED4 x CIT 03
CIT 05 Dim 920 x 920mm
COMBINED4 x CIT 05
COMBINED4 x CIT 07
CIT 07 Dim 940 x 940mm
CIT 08 Dim 1120 x 520mm
COMBINED4 x CIT 08
PLEASE NOTEThese panels are sold separately and still has to be welded together to create the
centre pieces shown here.
89 90
SMALL INSERTS
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Panels - Cast iron Panels - Cast ironSMALL INSERTS
CIP 61 Dim 95 x 355mm
CIP 62 Dim 110 x 380mm
CIP 63 Dim 70x 185mm
CIP 66 Dim 140 x 365mm
CIP 67 Dim 205 x 385mm
CIP 68 Dim 170 x 350mm
CIP 69 Dim 190 x 440mm
CIP 70 Dim 170 x 310mm
CIP 71 Dim 180 x 360mm
CIP 72 Dim 195 x 367mm
CIP 73 Dim 170 x 300mm
CIP 74 Dim 195 x 247mm
CIP 75 Dim 190 x 300mm
CIP 76 Dim 170 x 235mm
CIP 94 Dim 204 x 247mm
CIP 95 Dim 215 x 260mm
CIP 96 Dim 165 x 188mm
CIP 101 Dim 165 x 165mm
CIP 103 Dim 150 x 220mm
CIP 104 Dim 95 x 95mm
CIP 105 Dim 75 x 75mm
CIP 106 Dim 95 x 135mm
CIP 107 Dim 125 x 110mm
CIP 108 Dim 130 x 170mm
CIP 109 Dim 130 x 170mm
CIP 97 Dim 300 x 300mm
CIP 98 Dim 300 x 300mm
CIP 99 Dim 490 x 490mm
CIP 100 Dim 415 x 415mm
CIP 102 Dim 300 x 300mm
CIP 125 Dim 220 x 315mm
CIP 56 Dim 215 x 415mm
CIP 57 Dim 170 x 410mm
CIP 58 Dim 170 x 460mm
CIP 59 Dim 245 x 700mm
CIP 60 Dim 230 x 560mm
CIP 24 Dim 150 x 570mm
CIP 86 Dim 100 x 640mm
CIP 87 Dim 100 x 775mm
CIP 88 Dim 105 x 520mm
CIP 89 Dim 80 x 700mm
CIP 90 Dim 100 x 700mm
CIP 46 Dim 210 x 380mm
CIP 49 Dim 185 x 390mm
CIP 50 Dim 195 x 410mm
CIP 16 Dim 180 x 470mm
CIP 20 Dim 200 x 435mm
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
CIP 17 Dim 180 x 530mm
CIP 03 Dim 225 x 380mm
CIP 43 Dim 155 x 435mm
91 92
CAST IRON PANELS (CIP)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Panels - Cast iron
CIP 18 Dim 245 x 700mm
CIP 19 Dim 200 x 620mm
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Panels - Cast ironCAST IRON PANELS (CIP)
CIP 22 Dim 185 x 655mm
CIP 23 Dim 290 x 820mm
CIP 25 Dim 280 x 665mm
CIP 26 Dim 215 x 650mm
CIP 27 Dim 185 x 680mm
CIP 28 Dim 210 x 720mm
CIP 29 Dim 230 x 650mm
CIP 31 Dim 240 x 710mm
CIP 37 Dim 220 x 715mm
CIP 64 Dim 200 x 700mm
CIP 65 Dim 185 x 670mm
CIP 77 Dim 180 x 700mm
CIP 78 Dim 200 x 610mm
CIP 79 Dim 110 x 745mm
CIP 45 Dim 190 x 890mm
CIP 81 Dim 185 x 880mm
CIP 82 Dim 220 x 870mm
CIP 83 Dim 170 x 735mm
CIP 84 Dim 140 x 790mm
CIP 85 Dim 217 x 870mm
CIP 91 Dim 255 x 435mm
CIP 92 Dim 260 x 330mm
CIP 54 Dim 240 x 520mm
CIP 55 Dim 275 x 640mm
CIP 80 Dim 245 x 730mm
CIP 32 Dim 210 x 600mm
CIP 12 Dim 450 x 440mm
CIP 93 Dim 360x 460mm
CIP 14 Dim 265 x 396mm
CIP 15 Dim 275 x 410mm
93 94
CIP 146 Dim 250 x 700mm
CAST IRON PANELS (CIP)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Panels - Cast iron
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Panels - Cast ironCAST IRON PANELS (CIP)
CIP 47 Dim 355 x 825mm
CIP 48 Dim 350 x 770mm
CIP 51 Dim 340 x 785mm
CIP 52 Dim 420 x 630mm
CIP 53 Dim 310 x 680mm
CIP 01 Dim 215 x 685mm
CIP 07 Dim 350 x 710mm
CIP 08 Dim 360 x 710mm
CIP 09 Dim 470 x 810mm
CIP 10 Dim 350 x 750mm
CIP 11 Dim 580 x 770mm
CIP 30 Dim 230 x 590mm
CIP 42 Dim 320 x 635mm
CIP 44 Dim 215 x 705mm
CIP 34 Dim 240 x 775mm
CIP 35 Dim 220 x 710mm
CIP 36 Dim 335 x 815mm
CIP 39 Dim 340 x 825mm
CIP 40 Dim 260 x 645mm
CIP 33 Dim 270 x 910mm
CIP 38 Dim 340 x 815mm
CIP 02 Dim 360 x 830mm
CIP 04 Dim 405 x 655mm
CIP 05 Dim 390 x 790mm
CIP 06 Dim 440 x 825mm
CIP 21 Dim 470 x 710mm
CIP 133 Dim 920 x 450mm
CIP 41 Dim 290 x 770mm
95 96
GATE TOPPERS
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Panels - Cast iron
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Panels - Cast ironGATE INSERTS
CIP 1 1 1 / C I P 1 1 2 Dim 425 x 440mm
CIP 1 13 / C IP 1 14Dim 240 x 240mm
CIP 1 15 Dim 270 x 550mm
CIP 116 / CIP 117 Dim 190 x 310mm
CIP 1 18 Dim 390 x 750mm
CIP 119 Dim 270 x 520mm
CIP 120 Dim 440 x 540mm
CIP 145 (x 2 Panels) Individual Panel Dim: 890 x 295mm
Dim: 890 x 295mm per side / Dim: 1780 x 295mm total width and height (Double Sided Panel - Sold Separately)
CIP 145 (x 4 Panels)Individual Panel Dim: 890 x 295mm
Dim: 890 + 295 x 890mm per side / Dim: 2370 x 890mm total width and height(Double Sided Panel - Sold Separately)
CIP 110 Dim 450 x 230mm
CIP 121 Dim 830 x 310mm
CIP 122 Dim 350 x 250mm
CIP 123 Dim 770 x 410mm
CIP 124 Dim 530 x 250mm
CIP 124 A Dim 530 x 250mm
CIP 139Individual Panel Dim: 380 x 800mm
Dim: 380 x 800mm per side / Dim: 760 x 800mm total (Two sdes sold separately)
97 98
CIP 134Individual Panel Dim: 390 x 785mm
Dim: 390 x 785mm per side / Dim: 780 x 785mm total (Two sides sold separately)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
INSERT PANELS INSERT PANELS
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Panels - Cast ironPanels - Cast iron
CIP 140 Dim 875 x 875mm
CIP 141 Dim 775 x 775mm
CIP 142 Dim 555 x 555mm
CIP 143 Dim 535 x 535mm
CIP 144 Dim 450 x 450mm
(Double Sided)
CIP 135 Dia 630mm
CIP 136 Dia 560mm
CIP 137 Dia 390mm
CIP 138 Dia 330mm
CIP 132 Dim 960 x 410mm
CIP 127 Dim 830 x 525mm
CIP 128 Dim 635 x 390mm
CIP 129 Dim 780 x 435mm
CIP 130 Dim 585 x 285mm
CIP 126 Dim 720 x 475mm
CIP 131 Dim 775 x 430mm
99 100
CIP 13 Dim 435 x 440mm
101 102
RosettesRosettes
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
CAST STEEL ROSETTES (CSR)
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Rosettes, Panels and Scrolls can be made from a variety of materials.
As standard, all our wrought iron rosettes are made from a good quality mild steel and are being formed into shapes on site in our factory. Therefore we can offer a very fast delivery and always offer the same product, even if you have purchased it a while ago. If we have discontinued any of our panel designs, we will be able to make it up
for you again in future if you ever need the same product.
Because we manufacture the items ourselves we can do custom made rosettes, so if any of your customers are looking for a specific design, we can quote you on creating the desired rosette, panel and/or scroll.
AVAILABLE MATERIALS
Refer to this table below for the standard materials we work with accross all wrought iron items that we produce.
Rosettes, Panels and Scrolls can also be made from hammered material, depending on the size of the scrollwork and material selected. Contact us for more information.
MATERIALS Square bar A 8mm B 10mm C 12mm D 16mm
LF
Round bar E 8 mm F 10 mm G 12 mm H 16 mm
N 25x8mm O 30x6mm P 30x8mm Q 40x6mm R 40x8mm
MATERIALS Flat bar 12x6mm J 16x6mm K 20x6mm L 20x8mm M 25x6mm
Left Facing Scroll RF Right Facing Scroll H Hammered Scroll
PLEASE NOTE
CSR 01 Dia 120mm
CSR 02Dia 115mm
CSR 03Dim 370 x 195mm
CAST STEEL PANEL
CSP 70290 x 170mm
Fits over a 12mm Bar or Tube
PLEASE NOTE
At the moment, the above cast steel panel and rosettes are the only ones we are importing in a STEEL material, but we are continuously expanding our range and will look at bringing in more steel panels in the future if we find
that there is a big enough demand for it.
Panels
103 104
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
ROSETTES (ROS) - MILD STEEL ROSETTES (ROS) - MILD STEEL
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
RosettesRosettes
ROS 01Dim 210 x 260mm
ROS 02Dim 230 x 230mm
ROS 03Dim 260 x 260mm
ROS 04Dim 180 x 180mm
ROS 05 Dim 240 x 240mm
ROS 06 HDim 260 x 260mm
ROS 07 Dim 480 x 520mm
ROS 08 Dim 760 x 760mm
ROS 12Dim 420 x 420mm
ROS 11Dim 420 x 420mm
ROS 10Dim 400 x 400mm
ROS 09Dim 420 x 420mm
ROS 14Dim 425 x 425mm
ROS 15Dim 485 x 485mm
ROS 13Dim 550 x 550mm
ROS 17 Dim 520 x 540mm
ROS 18 Dim 420 x 420mm
ROS 21 Dim 250 x 490mm
ROS 22 Dim 520 x 565mm
ROS 25Dim 390 x 390mm
ROS 26 Dim 000 x 000mm
ROS 27 Dim 400 x 560mm
ROS 28 Dim 300 x 330mm
MATERIALS Square bar A 8 mm B 10 mm C 12 mm D 16 mm Round bar E 8 mm F 10 mm G 12 mm H 16 mm
MATERIALS Flat bar 12 x 6 mm J 16 x 6 mm K 20 x 6 mm L 20 x 8 mm M 25 x 6 mm N 25 x 8 mm O 30 x 6 mm P 30 x 8 mm Q 40 x 6 mm R 40 x 8 mm
H Hammered
PLEASE NOTERosettes, Panels and Scrolls can be made from a
variety of materials.
Select which material you would like the items to be made from when requesting quotes. The price of the item will be determined by the material used. Refer to this tabel for the
relevant letter to be added to the code.
The letters underneath the size description indicates from which material the item can be manufactured.
ROS 06 HDim 260 x 260mm
ROS 16 Dim 650 x 650mm
12x6mm Flat Bar / 30x6mm Ring
105 106
ROSETTES (ROS) - MILD STEEL
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Rosettes
ROS 19 Dim 640 x 640mm
Dim 710 x 710mm (Diagonally)
ROS 20 Dim 670 x 670mm
Dim 900 x 900mm (Diagonally)
ROS 23 Dim 900 x 900mm
ROS 24 Dim 900 x 900mm
ROS 16 Dim 650 x 650mm
12x6mm Flat Bar / 30x6mm Ring
MATERIALS Square bar A 8 mm B 10 mm C 12 mm D 16 mm Round bar E 8 mm F 10 mm G 12 mm H 16 mm
MATERIALS Flat bar 12 x 6 mm J 16 x 6 mm K 20 x 6 mm L 20 x 8 mm M 25 x 6 mm N 25 x 8 mm O 30 x 6 mm P 30 x 8 mm Q 40 x 6 mm R 40 x 8 mm
H Hammered
PLEASE NOTERosettes, Panels and Scrolls can be made from a
variety of materials.
Select which material you would like the items to be made from when requesting quotes. The price of the item will be determined by the material used. Refer to this tabel for the
relevant letter to be added to the code.
The letters underneath the size description indicates from which material the item can be manufactured.
BracketsBRACKETS (BR) - STEEL
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
BR 04Dim 340 x 460mm
Leaves: 3-4mm Cast SteelCorner: 30 x 5mm Flat Bar
BR 01Dim 200 x 300mm
Scrolls: 12 x 6mm Flat BarCorner: 30 x 5mm Flat Bar
BR 02Dim 240 x 280mm
Scrolls: 12 x 6mm Flat BarCorner: 30 x 5mm Flat Bar
PLEASE NOTEAll brackets are sold in a raw metal finish and has not been powder coated.
Custom sizes as well as custom brackets can be ordered on request. Contact us for pricing.
BR 03Dim 280 x 300mm
Curve: 12mm Square BarCorner: 30 x 6mm Flat Bar
107 108
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
PICKET PANELS (PAN) - MILD STEEL
Panels
PAN 01 TDim 230 x 900mm
PAN 06Dim 230 x 900mm
PAN 02Dim 265 x 900mm
PAN 07Dim 350 x 900mm
PAN 03 TDim 230 x 900mm
PAN 08 TDim 230 x 1000mm
PAN 04Dim 230 x 900mm
PAN 09 TDim 230 x 1000mm
PAN 05Dim 220 x 900mm
PAN 10Dim 220 x 1000mm
PLEASE NOTE
Panels
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
IMPORTANT TO KNOW
All our panels are sold in plain material as standard, but we can do any of the panel scrollwork in a hammered finish and the centre square bar can be done in a single or double twisted bar finish for extra decoration.
Please note that some of the panels indicated in this catalogue does show a twisted bar finish in order for you to get an idea of how it adds extra detail to the panels. If you would like to order any of the panels with the
hammered or twisted detail, please indicate this when ordering the items.
THE CIRCLES UNDERNEATH THE PANEL DIMENSIONS INDICATES WHICH MATERIAL THE PANEL SHOWN IN THE CATALOGUE WAS MADE FROM. THE CIRCLES UNDERNEATH THOSE INDICATES THE MATERIAL
FROM WHICH WE HAVE MADE STOCK. CUSTOM MATERIALS CAN BE ORDERED ON REQUEST.
Panels, Rosettes and Scrolls can be made from a variety of materials.
As standard, all our wrought iron panels are made from a good quality mild steel and are being formed into shapes on site in our factory. Therefore we can offer a very fast delivery and always offer the same product, even if you have purchased it a while ago. If we have discontinued any of our panel designs, we will be able to make it up
for you again in future if you ever need the same product.
Because we manufacture ourselves we can do custom made panels, so if any of your customers are looking for a specific design, we can quote you on creating the desired panel and/or scroll.
All the picket panels in our catalogue has a 12mm square bar centre and most of the panel scroll work will be done in either a 12x6mm flat bar or a 12mm square bar as standard, unless you indicate that you require the item in a
different material size. When ordering from us, please indicate this to us.
Refer to this table below for the standard materials we work with accross all wrought iron items that we produce.
Rosettes, Panels and Scrolls can also be made from hammered material, depending on the size of the scrollwork and material selected. Contact us for more information.
MATERIALS Square bar A 8mm B 10mm C 12mm D 16mm
Round bar E 8 mm F 10 mm G 12 mm H 16 mm
N 25x8mm O 30x6mm P 30x8mm Q 40x6mm R 40x8mm
MATERIALS Flat bar 12x6mm J 16x6mm K 20x6mm L 20x8mm M 25x6mm
H Hammered FinishT Twisted Finish
A B C L M N OSquare
E F G I J KFlat Bar
PRound
AVAILABLE MATERIALS
D H Q R
C I+ C I+ C I+ C I+ C I+
C I+ C I+ C I+ C I+ C I+
109 110
PICKET PANELS (PAN) - MILD STEEL
PanelsPICKET PANELS (PAN) - MILD STEEL
Panels
PAN 21Dim 130 x 1000mm
PAN 16 Dim 200 x 900mm
PAN 22 Dim 130 x 1000mm
PAN 17Dim 240 x 900mm
PAN 23Dim 130 x 900mm
PAN 18 Dim 140 x 900mm
PAN 24Dim 145 x 900mm
PAN 19Dim 180 x 900mm
PAN 20 Dim 150 x 900mm
PAN 11 Dim 250 x 1000mm
PAN 12Dim 190 x 1000mm
PAN 13Dim 215 x 900mm
PAN 14Dim 275 x 900mm
PAN 15 Dim 275 x 1000mm
Comes Hammered
C I+ C I+ C I+ C I+ C I+
C I+ A C+ C I+ C I+ C I+
C I+ C I+ C I+ C I+
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATEI M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
PAN 35 Dim 420 x 900mm
C I+
PAN 36 Dim 190 x 900mm
PAN 37Dim 200 x 900mm
PAN 38 Dim 235 x 900mm
PAN 39Dim 155 x 900mm
PAN 40 Dim 155 x 900mm
C
Comes Twisted
C I+ C I+ C I+ C I+
111 112
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
PICKET PANELS (PAN) - MILD STEEL
PanelsPICKET PANELS (PAN) - MILD STEEL
Panels
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
PAN 46 TDim 240 x 900mm
PAN 42 T Dim 170 x 1000mm
PAN 47 TDim 90 x 900mm
PAN 43 TDim 170 x 1000mm
PAN 48Dim 130 x 900mm
PAN 44Dim 140 x 900mm
PAN 49Dim 155 x 900mm
PAN 45 Dim 170 x 1000mm
PAN 50Dim 90 x 1000mm
C
Comes Twisted
C I+ C I+ C I+ C I+
C I+ C I+ C I+ C I+
PAN 61Dim 155 x 900mm
C I+
PAN 59 / PAN 59TDim 155 x 900mm
PAN 60 / PAN 60T Dim 155 x 900mm
PAN 62Dim 155 x 900mm
PAN 63 T Dim 155 x 900mm
C I+ C I+ C I+ C I+
PAN 64Dim 155 x 900mm
PAN 69Dim 155 x 900mm
PAN 71Dim 200 x 900mm
PAN 72Dim 230 x 900mm
C I+
C I+ C I+ C I+
PAN 73Dim 235 x 900mm
PAN 74 Dim 245 x 900mm
C I+ C I+
113 114
PICKET PANELS (PAN) - MILD STEEL
PanelsPICKET PANELS (PAN) - MILD STEEL
Panels
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
PAN 75Dim 245 x 900mm
PAN 76Dim 245 x 900mm
PAN 81Dim 335 x 1000mm
C I+ C I+
C I+
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
PAN 90Dim 265 x 1000mm
PAN 91Dim 265 x 1000mm
PAN 92Dim 265 x 1000mm
PAN 93Dim 230 x 900mm
PAN 94Dim 230 x 900mm
PAN 98Dim 230 x 1000mm
PAN 99Dim 230 x 900mm
PAN 100Dim 230 x 1000mm
PAN 101Dim 230 x 1000mm
PAN 102Dim 230 x 1000mm
C I+ C I+ C I+
C I+ C I+C I+ C I+
C I+ C I+ C I+
PAN 103Dim 230 x 900mm
PAN 104Dim 230 x 900mm
C I+ C I+
PAN 105Dim 170 x 900mm
PAN 106Dim 230 x 900mm
PAN 107Dim 230 x 900mm
C I+ C I+ C I+
PAN 108Dim 160 x 900mm
PAN 109Dim 160 x 900mm
C I+ C I+
115 116
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
PICKET PANELS (PAN) - MILD STEEL
PanelsPICKET PANELS (PAN) - MILD STEEL
Panels
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
PAN 110Dim 160 x 900mm
PAN 111Dim 160 x 900mm
PAN 112Dim 160 x 900mm
PAN 113Dim 235 x 900mm
PAN 114Dim 90 x 900mm
PAN 115Dim 109 x 900mm
PAN 117Dim 190 x 1000mm
PAN 118Dim 215 x 1000mm
PAN 119Dim 215 x 1000mm
PAN 120Dim 215 x 1000mm
Comes Twisted Comes Twisted
C I+
C I+
C I+
C I+
C I+ C I+ C I+
C I+ C I+ C I+
PAN 123 TDim 200 x 1000mm
PAN 124 TDim 200 x 1000mm
C I+ C I+
PAN 132Dim 200 x 1000mm
PAN 130Dim 240 x 750mm
PAN 131 TDim 240 x 1000mm
B
C I+C I+
PAN 133Dim 130 x 1000mm
PAN 134Dim 240 x 750mm
B
MATERIALS Square bar A 8 mm B 10 mm C 12 mm D 16 mm
Round bar E 8 mm F 10 mm G 12 mm H 16 mm
N 25 x 8 mm O 30 x 6 mm P 30 x 8 mm Q 40 x 6 mm R 40 x 8 mm
MATERIALS Flat bar 12 x 6 mm J 16 x 6 mm K 20 x 6 mm L 20 x 8 mm M 25 x 6 mm
H Hammered FinishT Twisted Bar
Indicate which material and finish you are interested in when ordering panels. Standard
material is always 12mm square bar and 12x6mm flat bar.
AVAILABLE MATERIAL SIZESSquare Round
A B C E F GD HFlat Bar
L M N OI J K P Q R
PAN 135Dim 000 x 0000mm
C
I
B CB C
117 118
ORNATE INSERT PANELS
Panels
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
S-SHAPED PANELS
Panels
PAN 65 Dim 460 x 900mm
PAN 78 Dim 1100 x 750mm
C I+ C I+
G IB C F
PAN 41Dim 230 x 730mm
PAN 31 Dim 230 x 720mm
PAN 32Dim 230 x 720mm
PAN 33Dim 255 x 660mm
PAN 34Dim 230 x 700mm
C C ICC
G IB C F
PAN 122Dim 190 x 500mm
MINI PAN 54
I
PAN 51Dim 300 x 750mm
PAN 53Dim 300 x 750mm
C I
PAN 52Dim 300 x 860mm
PAN 54Dim 360 x 860mm
I I
PAN 55Dim 300 x 750mm
PAN 56Dim 300 x 750mm
PAN 57Dim 370 x 900mm
PAN 58Dim 350 x 800mm
C I CC
PAN 25 Dim 235 x 850mm
I
S-SHAPED PANELS
G IB C F G IB C F G IB C F G IB C F G IB C F G IB C FG IB C F G IB C F
B C I B C I B C B CG IB C F B C I
A B E F
119 120
NON-PICKET PANELS
Panels
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
CENTRE PIECE PANELS
Panels
PAN 26Dim 230 x 700mm
PAN 27Dim 250 x 900mm
PAN 28Dim 125 x 900mm
PAN 29Dim 150 x 800mm
PAN 30Dim 150 x 800mm
IC CC I+ C I+
PAN 127Dim 240 x 800mm
PAN 128Dim 120 x 800mm
PAN 129Dim 120 x 800mm
PAN 125Dim 200 x 800mm
PAN 126Dim 200 x 800mm
CURL: OPPOSITE DIRECTION
PAN 80Dim 150 x 1000mm
I
PAN 66 Dim 180 x 750mm
PAN 67Dim 400 x 760mm
PAN 68 Dim 400 x 685mm
CC C
PAN 121Dim 192 x 750mm
PAN 66 - UpdateDim 180 x 750mm
B
PAN 87Dim 395 x 505mm
I
PAN 89Dim 320 x 550mm
PAN 86Dim 225 x 330mm
PAN 88Dim 305 x 385mm
C I+C I+C I+
GB C F GB C FGB C FGB C F G IB C F
CURL: SAME DIRECTION
C I+C I+ C C C
121 122
PAN 96Dim 420 x 500mm
PAN 97Dim 240 x 500mm
I
PAN 84Dim 300 x 560mm
PAN 85Dim 340 x 560mm
I
PAN 95Dim 240 x 255mm
I I C I+
CENTRE PIECE PANELS
Panels
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
CENTRE PIECE PANELS
Panels
PAN 79Dim 200 x 630mm
PAN 77 Dim 245 x 900mm
PAN 70Dim 320 x 900mm
PAN 82Dim 360 x 700mm
PAN 83Dim 430 x 1000mm
I C I+C I+ C I+C I+
123 124
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATEI M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Garden AccessoriesGarden AccessoriesGARDEN ACCESSORIES (GA) GARDEN ACCESSORIES (GA)
GA 01Plant Holder
Dim 800 x 800mm
GA 02Plant Holder
Dim 800 x 800mm
GA 07Wall Decor
Dim 600 x 800mm
GA 03Wall Decor
Dim 700 x 700mm
GA 04Wall Decor
Dim 700 x 700mm
GA 05Wall Decor
Dim 700 x 700mm
GA 08Plant Holder
Dim 700 x 700mm
GA 09Plant Holder
Dim 700 x 700mm
GA 10Wall DecorDim 400mm
GA 11Plant Hanger
Dim 305 x 440mm
GA 12Plant Hanger
Dim 520 x 520mm
GA 14 - LeftWall Decor
Dim 920 x 1280mm
GA 14 - RightWall Decor
Dim 920 x 1280mm
125 126
I M P O R TA N T : IMAGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
GATE TOPPERS (GTOP) GATE TOPPERS (GTOP)
I M P O R TA N T : IM AGES ARE ILLUSTRATIVE ONLY – ALL S IZES ARE APPROXIMATE
Gate ToppersGate Toppers
E-MAIL [email protected] WEBSITE www.steelcityandcomponents.co.zaTEL 021 931 0422 CELL 062 012 2447 FAX 086 552 9597
FACTORY SHOP & WORKSHOP 52 EPPING AVENUE, ELSIES RIVER, CAPE TOWN, 7490
WHATSAPP us for a speedy response to queries and orders.