Upload
others
View
4
Download
1
Embed Size (px)
Citation preview
Page 1 www.handmade-jewelry-club.com
www.diylessons.org
Woven Uneven Heart Pendant Jewelry Making Tutorial Created by XQ Designs
www.Handmade-Jewelry-Club.com,
www.DIYLessons.org
Please do not distribute, lend or copy. Do not mass produce.
Copyrights 2012 XQ Designs
Descriptions:
Love is in the air! Show your love to special people by giving a unique shape woven heart pendant. While all other heart shaped pieces has that perfect shape, this particular heart is uniquely and intentionally shaped uneven, perfect for hanging as charms and pendants. The tutorial will teach you simple wire manipulation, wire beadweaving and wire weaving that created the vein-like weave that covered the heart frame. Suitable for beginners, in less than an hour you’ll be able to make two woven uneven heart pendants.
Page 2 www.handmade-jewelry-club.com
www.diylessons.org
Materials required Tools Needed
0.8mm (20 ga) copper wire 0.3mm (28 ga) copper wire
5 red Bicone crystals
• Flat nose pliers • Wire cutter
• Mandrel or any rounded object
• Hammer & steel block
Step 1: Cut at least 18cm (7 inches) of 0.8mm (20 ga) copper
wire.
Page 3 www.handmade-jewelry-club.com
www.diylessons.org
Step 2: Bend the wire and create a “V” shape using your nose
pliers approximately at 8cm (3 inches) from one end of
the wire.
Step 3: Fold the wire with the help of a pair of flat nose wire
pliers. One end should measure 10cm (4 inches) and the
other end should measure 8cm (3 inches).
Page 4 www.handmade-jewelry-club.com
www.diylessons.org
Step 4: Separate the wires again and pinch the folded end, shown in arrow to create a pointed end. This will be the bottom of your heart.
Step 5: With the 8cm (3 inches) wire, create a curved/looped
corner using a mandrel or any rounded object as a
guide. In this tutorial, we used the end of the nose
pliers.
Page 5 www.handmade-jewelry-club.com
www.diylessons.org
Step 6: After creating a curved corner, extend the wire
downward, towards the pinched bottom of your heart.
Step 7: Do the same for the side. The end of the wires should
meet together.
Note:
The heart frame should have an uneven shape; one side
bigger than the other.
Page 6 www.handmade-jewelry-club.com
www.diylessons.org
Step 8: After shaping your heart frame, place the heart frame
on a steel block and use a hammer to flatten and harden
the wire by hammering throughout the frame slowly.
Step 9: Bring up your 0.3mm (28 ga) wire and cut 40cm (16
inches). Wrap one end onto the 20 ga wires at least 2
times like shown in this picture.
Page 7 www.handmade-jewelry-club.com
www.diylessons.org
Step 10: Slide in 1 bicone crystal and position the crystal onto the
20 ga wires.
Step 11: Wrap the wire with the bicone crystal and then wrap
again 2 times after the bicone crystal.
Page 8 www.handmade-jewelry-club.com
www.diylessons.org
Step 12: Repeat Steps 10 & 11 and wrap at least 4 or 5 crystals.
Step 13: After wrapping two times after the last bicone crystal,
flip your heart. Weave the wire by leaving a space, a few
centimetres and wrap again once.
Page 9 www.handmade-jewelry-club.com
www.diylessons.org
Step 14: Continue to weave the wire by leaving again a space and
wrapping once.
Step 15: Repeat Steps 13 & 14 until you’ve wrapped one side of
the heart. You now have created your first line of loops.
Page 10 www.handmade-jewelry-club.com
www.diylessons.org
Step 16: Continue to weave your 2nd line of loops by weaving
over and going all the way around your 1st line of loops.
Step 17: After weaving your 2nd line of loops, weave the middle
part, going zigzag and through the left and right loops to
cover the empty space like shown in arrows.
Secure by wrapping neatly onto the heart frame and cut
off excess wire.
Page 11 www.handmade-jewelry-club.com
www.diylessons.org
Step 18: Cut another 40cm of 0.3mm (28 ga). Repeat Steps 14 to
17 for the other side of the heart.
You have completed the Woven Uneven Heart Pendant.
Hope you like it!
If you have any query or feedback for the tutorial,
please contact me at [email protected].
Please do not distribute, lend or copy.
Do not mass produce.
Copyrights 2012 XQDesigns
Page 12 www.handmade-jewelry-club.com
www.diylessons.org
Join our monthly subscription plan! Exclusive offer for our existing members
from www.diylessons.org and www.handmade-jewelry-club.com or buyers from
Etsy, Artfire and eBay! Just pay a small fee to access at least 5 tutorials a month,
click here to find out more: http://www.handmade-jewelry-
club.com/2011/12/join-diy-beading-club-and-get-access-to.html!