Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
19/21, Bora Bazar Street, Fort, Mumbai - 400 001 Tel: +91-22-2261 5932 / +91-22-2262 6709
Fax: +91-22-2265 0939 • Website: www.halstondistributors.inEmail: [email protected]
AHMEDABAD:
SURAT:
VIJAYWADA:
INDORE
Survey No. 110/9-10, Nr. Mahashakti Compound, B/S. Ambuja Synthetic,B/h. Old Narol Court, Ahmedabad - 382405 • Tel/Fax : 25735794 / 25735861E-mail : [email protected]
36, Khodiyar Nagae Society, Sai Suman Clinic Lane,Bhathena, Udhana, Surat - 395 210. Telefax : 0261 - 232 9898Email: [email protected]
12-7-42 Hayathkhan st.,Tarapet, Vijaywada 520 001.Tel : 0866-6669078 • Fax: 0866-2420980 • E-mail : [email protected]
Plot No. 348, Scheme No. 91, Near Water Tank, Malwa Mill Chowraha,Indore- 452003, Madhya PradeshTel: 0731- 2545932, Email: [email protected]
WORM DRIVE HOSE CLAMPS & FITMENT TOOL WORM DRIVE HOSE CLAMPS
Standard Worm Drive
SPRING LOADED CONSTANT TORQUEKlipco Torque Clamps have a constant tightening pressure, gives a complete 360° seal during hot & cold cycles and prevent leakages.
RUBBER INSULATION
Material Properties
Elongation at break %Tensile strength N/mm2Store hardness A Temperature - °C - Ageing and lightWear resistance: Weather and Ozone
Resistance against:Oil and GreasePetrol Acids Alkalis Alcohols
EPDM
350755±5-40° to +120° very good very good
unstable unstable goodgoodgood
MATERIALS
GENERAL USES AT• Automotives, Trucks, Tractors, & Two Wheelers• Aircrafts, Space & Satellites• Atomic Plants• Air Conditioning• Engineering, Machine- Tools, & Welding• Hydraulic & Pneumatics • Laboratories• Marine Navy & Defense
• Mines• Oil, Gas & Refinery• Plants- Steel, Chemical, Fertilizers Cement etc.• Plantations, Agriculture & Domestic• Railways & Metros• Sewage Treatment Plants• Traffic, Signals & Hoardings
* MS = Mild Steel* SS = Stainless Steel
Type Part Details
Band SS 201, 202Housing SS 430Screw CHQ MS/Carbon
W3
IS BS DIN AISI
W1 Band 1079 42st, CR MS 1449 1.0226 MSHousing 513 970 “ “ “ “Screw CHQ MS CHQ MS 1.0213 1008/1010
W2 201,202 - 201, 202430 S15 1.4016 430
EN CHQ 970 1.0213 MS/Carqon
BandHousing SS 201, 202, 430 SS 430 1.4016 SS 430Screw
W4 BandHousing SS 304 SS 304 S17 SS 1.4301 SS 304Screw
W5 BandHousing SS 316 SS 316 S31 SS 1.4401 SS 316Screw
All Mild Steel parts
are Zinc plated with
yellow passivation
Equi
vale
nt
Wing Screw
FITMENT TOOLS
Hexagonal Rigid Screw Driver
Hexagonal Flexi Screw Driver
Pneumatic Screw Driver
HOSE CLAMPS
WORM DRIVE HOSE CLAMPS WORM DRIVE HOSE CLAMPS
Formed Brand toAccommodate Housing1.Max. T
12 Max. H
12 Max. b2
A/F 7HexTypical Design
Z
All Dimensions are in mm9
Max. b1
DIMENSIONS OF CLAMPS
DIN 3017 KLIPCO zSizes Sizes MIN Max. Nm Max
W1 W2, W3 W4, W5
12 000 8.0 12
16 OOM 10 16 2.5 3
20 00 12 20 18
25 25A 16 25
32 1A 20 32 24 3.0 3.5
40 1X 25 40
50 2A 32 50
60 2X 40 60
70 3 50 70
80 3X 60 80 26 3.5 4
90 4 70 90
100 4X 90 100
110 110A 90 110
120 5 100 120
130 130A 110 130
140 6 120 140
150 6X 130 150
160 160A 140 160
Working Range Static Torque Material
IS: 4762 KLIPCO BS: 5315 X Z Y Fitment Failure HydraulicSizes Sizes Sizes Max. Max. Torque Max. Torque Pressure
Min. Max. Nm Nm MPa
12 000 12 9.5 1216 OOM 16 11 1620 00 20 13 20 14 3.4 4.5 1.4
22 0 22 16 2225 25A 25 18 25 25 20- OX - 20 28 4.2 5.6
30 1A 30 22 30
35 35A 35 25 35- 1 - 28 38
40 1X 40 30 40 30
45 45 35 4550 2A 50 35 50- 2 55 40 55
60 2X 60 45 6065 65A 65 50 6570 3 70 55 70- 75A - 60 75A 33 28
80 80 80 60 80
90 4 90 70 90100 4X 100 85 100 6.8 9.0 0.3
110 110A 110 90 110115 115A 115 95 115120 5 120 100 120130 130A 130 110 130
140 6 140 120 140150 6X - 130 150160 160A - 140 160
Working Range
25
45A 5.1 6.8 0.7
5.92 7.9
All Dimensions are in mm IS 4762 and BS 5315
The larger sizes test is based on housing In a fixture, band attached to tensile fixture, to screw torque to 6.8 Nm & band tension to 1. 5 KN upto 7.9 Nm without distortion or failure.
Klipco Outside Diameter Klipco Outside Diameter Klipco Outside Diameter Klipco Outside DiameterSize of Hose Size of Hose Size of Hose Size of Hose
7 150 175 10 225 250 13 300 325 16 375 4008 175 200 11 250 275 14 325 350 17 400 4259 200 225 12 275 300 15 350 375 18 425 450
Note : The range is for light duty (L) application only.
Housing Bolt
BandAssembly Failure Torque Data
TYPICAL INTERNATIONAL DESIGN
X
LARGER RANGE
12
11
10
9
8
7
6
5
4
3
2
IS : 4762 Max Torque requirement
Klipco W. D. Hoseclamps (average)
size
Nm
Val
ue
IS: 4762india
Y
SPECIFICATION :
MATERIAL :
MANUFACTURE:
HOUSING :
FINISH :
TESTS :
BS 5315: 1991, IS 4762 : 2002 and DIN: 3017.
The Material used in Manufacture of WORM DRIVE HOSE CLAMPS shall be selected at the
manufacturer's discretion provided that the finished clamps are capable of passing the tests specified.
Screw: Shall be held captive in the Clamp Housing.
Band shall have a thread form commencing at the free end extending for a length sufficient to enable the
clamp to be tightened on to the smallest diameter of component within the working range for which it is designed.
The housing shall not be readily removable from the band.
Clamp shall be smooth and free from burrs and sharp edges. Clamp Produced other than from corrosion
resistant material (Stainless Steel) shall be protected from electroplating coating of zinc as per Fe Zn12 of IS:
1573/1970 & BS: 1706-Zn3.
Free running Torque Test : for this purpose the torque required to move the screw in either direction shall
not exceed 1.5Nm i.e. (13.3 ibf /In or 0.16 kgf I m) Torque Test : The Clamp shall be tightened to 75% of the Torque
Load, as shown in table. On release, Clamp shall reveal no sign of permanent distortion of the housing, nor efficient
functioning of the clamp size. The Clamp shall then be retightened until permanent distortion or failure occurs, at
this point torque load shall be in excess of the value shown in table.
Hydraulic Pressure Test : The fluid used for the test shall be water at room temperature. Torque applied shall not be
more than 75% of the value. Pressure shall be applied gradually from an external source until leakage or other
failure occurs, at which stage the pressure shall be not less than appropriate value specified.
Band :
WORM DRIVE HOSE CLAMPS
A/F 7Hex
Formed Brand toAccommodate Housing
1.Max. T
14Max. V
16.5 Max. W
Typical DesignZ
All Dimensions are in mm13.5
Max. U
Y
IS: 4762india
X